As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will have the opportunity to develop unconventional ultrasound transducer drivers, receiver circuits for IoT and biomedical applications as well as cutting-edge high-speed analog circuits for advanced optical communication.

Role & Responsibilities

• Design and tapeout circuit blocks e.g. high linearity low-noise amplifier, variable gain amplifier, envelop detector, and high voltage driver for MEMS ultrasound transducers.
• Work together with team on system integration and demonstration.
• Work together with team to investigate novel circuit/system solutions to create new inventions.

Requirements

• Master’s / PhD degree in Electrical Engineering or equivalent
• Minimum 2 years of transistor-level analog circuit design experience
• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Design experience with high voltage BCD process would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Job Description:

• Develop epitaxial processes for selective and non-selective growth of Ge and SiGe layers on Si substrates.
• Improve baseline processes for high-quality SiGe and Ge epitaxy: control uniformity and thickness and minimize threading dislocation density.
• Design epitaxial structures and develop processes for Ge and SiGe photodetectors (PD) and electro-absorption modulators (EAM) devices, integrating Ge/SiGe devices into Silicon photonic circuits.
• Troubleshoot to maintain tool and process quality. Prepare Standard Operating Procedures (SOPs), Out-of-Control Plans, and other technical documentation to maintain processes and tools.
• Perform metrology and characterization of SiGe and Ge epilayers (e.g., dopant and thickness uniformity, surface roughness, crystal quality, stress, carrier lifetime, etc.).
• Correlate SiGe and Ge crystal defects (type and density) with device performance and yield, and with device processing conditions.
• Provide technical support for technology transfer and process release requirements.
• Prepare technical presentations and papers for meetings, conferences and journals.

Requirements:

• PhD degree in Materials Science and Engineering, Physics, Chemical Engineering, Chemistry, Microelectronics Engineering, or closely related fields are welcome to apply.
• Prior 3 to 5 years direct experience in SiGe/Ge epitaxy and materials characterization.
• Working knowledge and prior hands-on experience in Design of Experiments (DOE) methodologies, statistical root cause analysis, and problem-solving methods, is desired.
• Understanding of epitaxial system hardware is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, AFM, Ellipsometry is advantageous.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Develop epitaxial processes for selective and non-selective growth of Ge and SiGe layers on Si substrates.
• Improve baseline processes for high-quality SiGe and Ge epitaxy: control uniformity and thickness and minimize threading dislocation density.
• Design epitaxial structures and develop processes for Ge and SiGe photodetectors (PD) and electro-absorption modulators (EAM) devices, integrating Ge/SiGe devices into Silicon photonic circuits.
• Troubleshoot to maintain tool and process quality. Prepare Standard Operating Procedures (SOPs), Out-of-Control Plans, and other technical documentation to maintain processes and tools.
• Perform metrology and characterization of SiGe and Ge epilayers (e.g., dopant and thickness uniformity, surface roughness, crystal quality, stress, carrier lifetime, etc.).
• Correlate SiGe and Ge crystal defects (type and density) with device performance and yield, and with device processing conditions.
• Provide technical support for technology transfer and process release requirements.
• Prepare technical presentations and papers for meetings, conferences and journals.

Requirements:

• PhD degree in Materials Science and Engineering, Physics, Chemical Engineering, Chemistry, Microelectronics Engineering, or closely related fields are welcome to apply.
• Prior 3 to 5 years direct experience in SiGe/Ge epitaxy and materials characterization.
• Working knowledge and prior hands-on experience in Design of Experiments (DOE) methodologies, statistical root cause analysis, and problem-solving methods, is desired.
• Understanding of epitaxial system hardware is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, AFM, Ellipsometry is advantageous.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

ROLE:

IME A*Star is currently working on establishing a hybrid fabrication platform for 150mm & 200mm Silicon Carbide (SiC) power MOSFETs as part of the new SiC R&D program. The main objective of this program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration for various types of power MOSFETs and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, with a specific focus on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this deputy lead for wide-bandgap device integration role include the development and integration of several modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, ohmic contact formation etc are essential. We are actively looking for individual with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, device layout design, design verification, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• To lead development of SiC power technologies, serving as both front and back-end process integration in collaboration with advanced module development team. And aim
to grow this team to ~10 headcounts in the next 3 years.

• Optimize and customize process flows for individual SiC products

• Identify and resolve process integration issues and related problems

• Develop specific or derivative processes to meet customer needs

• Support new designs by conducting module characterization and developing effective design rules

• Define and implement measures to enhance stability, yield, reliability, and reduce development costs & time

• Plan and implement sustainable corrective actions to address process deviations

• Continuously monitor and utilize expertise in process and equipment capabilities to achieve optimal device performance

• Determine the correct and effective way to deliver processes, functional devices, and other items to multiple customers

• Perform project management tasks and conduct data analysis

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device Physics

• Highly proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and MOSFET device physics

• Proficient in teaching and knowledge transfer to junior staff members

• Strong communication skills to effectively convey information about process module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data; combined with strong presentation abilities.

We are looking for a Research Scientist / Senior Research Scientist to work on a project on developing all-optical neuromorphic computing system. This project is looking to develop on-demand light-matter interaction technology with atomically-thin materials for waveguide optical signal control. The successful candidate will be expected to work under the guidance of the principal investigator and publish in high-quality peer-reviewed scientific journals.

The selected candidate will have access to excellent scientific resources and opportunities for future career development (e.g. presentations at conferences, opportunities for grant applications, advanced training courses, etc.).

Job Requirements:

• PhD degree in Nanophotonics, Applied Physics, Optics, Materials Science or a related field.
• Experience in simulation, design, and characterization of nanophotonic/optical device.
• Experience in the exfoliation, transfer, and characterization of vdw materials.
• Knowledgeable in nanofabrication process for optoelectronic devices.
• Prior experience in optical system design, assembly and alignment will be an advantage.
• Demonstrated ability in developing high-quality, peer-reviewed scientific journal publications

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

We are looking for a Research Scientist / Senior Research Scientist to work on a project on developing all-optical neuromorphic computing system. This project is looking to develop on-demand light-matter interaction technology with atomically-thin materials for waveguide optical signal control. The successful candidate will be expected to work under the guidance of the principal investigator and publish in high-quality peer-reviewed scientific journals.

The selected candidate will have access to excellent scientific resources and opportunities for future career development (e.g. presentations at conferences, opportunities for grant applications, advanced training courses, etc.).

Job Requirements:

• PhD degree in Nanophotonics, Applied Physics, Optics, Materials Science or a related field with at least 5 years' of relevant experience.
• Experience in simulation, design, and characterization of nanophotonic/optical device.
• Experience in the exfoliation, transfer, and characterization of vdw materials.
• Knowledgeable in nanofabrication process for optoelectronic devices.
• Prior experience in optical system design, assembly and alignment will be an advantage.
• Demonstrated ability in developing high-quality, peer-reviewed scientific journal publications

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

• Be a member of the leadership team to achieve the vision and mission of the National GaN Technology Centre (NGTC).
• Lead the Technology, Engineering and Industry team in technology road mapping and R&D pathfinding in device architecture, fabrication process technology, and MMIC design.
• Lead the Technology team, which comprises (a) characterization & modelling, (b) MMIC design, testing & model validation, (c) device failure and reliability analysis, (d) ultra high frequency GaN-on-SiC device design, layout, fabrication and characterization, and (e) low voltage GaN-on-Silicon device design, layout, fabrication and characterization.
• Coordinate with the Engineering team to develop ultra high frequency devices, ultra low voltage devices, and their MMICs.
• Coordinate with the Engineering and Operations teams to ensure timely delivery of the projects.
• Initiate and secure research grants and industry funding.
• Initiate, coordinate and manage research collaborations with IHLs and industry partners.
• Provide regular progress report of the Technology team’s activities to NGTC management.
• Represent NGTC in customer meetings.

Requirements:

• PhD in Electrical & Electronic Engineering, Materials Science and Engineering, Microelectronics Engineering, or closely related fields are welcome to apply.
• Deep understanding of GaN-HEMT device physics and GaN-based MMICs.
• At least 15-20 years of post-PhD hands-on experience in GaN HEMT and MMIC technology development including design, characterization (e.g. DC, small-signal and load-pull measurement), and modelling; preferably in RF GaN-on-Silicon or GaN-on-SiC technologies.
• At least 8 years of experience in leading a team of research engineers/scientists in managing multiple projects.
• Candidates with industry experience in GaN related R&D would be preferred.
• Working knowledge and hands-on experience in Design of Experiments (DOE) methodologies, statistical root cause analysis, problem-solving methods, and in-line metrology techniques is desired.
• Possess strong leadership, project management, interpersonal and oral/written communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Chugai Pharmabody Research Pte. Ltd. (“CPR”) was established in Singapore as a wholly-owned subsidiary of Chugai Pharmaceutical Co., Ltd (Chugai), a member of Roche group, in January 2012 and started operations on July 2, 2012. Located at Biopolis in Singapore, it aims to generate new antibody drugs based on Chugai’s proprietary antibody engineering technologies, such as recycling antibody®, sweeping antibody®, bispecific antibody, various Fc engineered antibodies, and other new antibody engineering technologies that are under development.

Senior Scientist – Protein Analysis Unit

As a Senior Scientist in CPR, you will leverage your passion and creativity to lead an innovative antibody drug project through a characterization of drug candidates, collaborating with other multi-disciplinary teams to achieve a milestone of a project. The candidate will play a key role to drive our innovative drug discovery project and technology development by characterizing its properties with biochemistry and biophysics analysis.

Job Scope:

- Lead the affinity screening assay of antibody during optimization phase using SPR analysis or BLI analysis.

- Plan and conduct antibody/ligand binding analysis.

- Plan and conduct biophysical analysis to evaluate physicochemistry properties of antibody.

- Novel protein analysis technology development.

- Developability and manufacturability assessment of antibody drug.

Job Requirements

The applicant is recommended to have experience in at least one of the following areas:

- Analysis of protein-protein interactions (SPR, BLI, ELISA)

- Column chromatography analysis (IE, SE, RP etc.)

- DLS, DSC, solubility test, stability test

- LCMS analysis of proteins

The applicant must have completed and be awarded with a relevant Ph.D. degree in Biomedical Science/Biochemistry/Chemical Biology/Biotechnology/Life Science/Pharma Science with 1-2 years of working experience in a related field.

Scientists with strong passion in medical science for creating and delivering innovative drugs to society which leads to saving patients suffering from unmet medical needs are highly desired. You should also possess good command of spoken and written English, excellent organizational and communication skills, team player mindset, as well as the ability to multi-task.

Interested applicants are invited to email their detailed resume, qualifications, availability, current and expected salary to: [email protected]

For more information regarding our Company, you may refer to our website at: http://chugai-pharmabody.com/

We regret that only short-listed candidates will be notified

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 12 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

ASSOCIATE/SENIOR ASSOCIATE

As an Associate/Senior Associate, you will be responsible for leading a project team in a collaborative, multi-disciplinary environment and ensuring the successful delivery of projects as well as the financial management of projects. You will lead design development, review & presentation using drawings, physical & virtual models and collaborate with other disciplines to produce fully coordinated project information including BIM models, drawings, schedules and specifications.

Requirements & Attributes:

• Minimum Bachelor’s Degree in Architecture or equivalent qualifications

• Minimum 10 - 15 Years of experience in design development, team management and client interface

• Ability to self-develop and build colleagues to enhance team potential

• Experience in mixed-use and infrastructure projects will be an advantage

• Registered Architect with the Board of Architects Singapore (BOA) will be an advantage

• Other professional certifications such as GMP or GMFP will be an advantage

• Excellent communication and presentation skills

• Proficient in BIM (Revit Architecture)

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

We are seeking a skilled and experienced scientist to join our dynamic team. The successful candidate will be working in a strong team developing diagnostic product. The role involves collaborating with cross-functional teams, understand the target product profile for the intended use, conducting feasibility studies, verification and validation as well ensuring designs meet technical and regulatory requirements.

Roles and Responsibilities:

• Executing Analytical Validation and Clinical Validation laboratory work
• Executing laboratory work for IVD/RUO product optimization
• Develop protein conjugation capabilities within the protein team.
• Develop protein conjugation workflows which applicable to IVD/RUO product development and scalable for large scale manufacturing
• Documentation of laboratory results as required by DxD Hub QMS and A*STAR
• Support the development of target product profile

Key Requirements:

• Bachelor’s degree in science, Biology or related experiences
• 3 - 5 years laboratory experience
• Knowledgeable in protein conjugation techniques and immunoassays
• Knowledgeable in diagnostics and basic life sciences technologies
• Experience with office management software such as MS office (Excel, Word, PowerPoint)
• Able to communicate effectively, multi-task and able work in a dynamic environment
• Works well as part of a team, yet able to work independently
• Self-driven team player who is able to work in a fast-paced environment
• Work on-site with a cross-functional team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Genome Research Informatics and Data Science Platform is looking for a full Stack Software Developer to design, build and operate software systems in support of Institute and hosted programs. Your primary responsibilities include FE and BE Software Development and to ensure compliance with standards and policies (A*STAR, ISO etc)

Requirements

• Bachelor/Master Degree in IT/Computer Science
• Experience in scientific software development and full stack software DevOps
• Possess skills in Javascript for FE and BE, Java and Python
• Knowledge in Containerization and Serverless on Cloud (e.g. AWS Lambda) would be advantageous

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Genome Research Informatics and Data Science Platform is looking for a full Stack Software Developer to design, build and operate software systems in support of Institute and hosted programs. Your primary responsibilities include FE and BE Software Development and to ensure compliance with standards and policies (A*STAR, ISO etc)

Requirements

• Bachelor/Master Degree in IT/Computer Science
• Experience in scientific software development and full stack software DevOps
• Possess skills in Javascript for FE and BE, Java and Python
• Knowledge in Containerization and Serverless on Cloud (e.g. AWS Lambda) would be advantageous

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Responsibilities

• Develop and align strategies to economic and national agenda (e.g. DxD Hub 3.0 in RIE2030 strategy), including strengthening linkages with internal and external stakeholders (e.g. MOH, clinical clusters in setting up satellite programmes).
• Translate overarching DxD Hub’s strategies into an action plan, coordinating across public sector and internal stakeholders and entities to achieve Enterprise’s desired outcomes.
• Set, monitor and report performance and tracking indicators for DxD Hub in alignment with National Platforms Co-ordinating Office and A*STAR Innovation and Enterprise (I&E) division and its operating units and in partnership with finance for financial targets.
• Establish and maintain corporate branding and public awareness of DxD Hub.
• Perform Divisional reporting and communications functions with stakeholders within A*STAR, governing and advisory boards, as well as other public agencies in the ecosystem.
• Review internal operational processes for possible improvements, in alignment with Enterprise and A*STAR best practices.
• Build capabilities of service platforms & drive realization of business outcome.
• Hires, motivates, develops, and retains key talent.
• Develop and deliver accurate reports of operational metrics to the CEO. Deliver monthly operation reports.

Requirements:

• Bachelor’s degree, preferably in Science or Engineering.
• More than 6 years of relevant working experience. Experience in strategic and/or corporate planning would be an advantage.
• Possess strong strategic and analytical thinking skills.
• Able to identify and contextualise stakeholder issues and manage them appropriately.
• Good communication (written and verbal) and interpersonal skills. Able to work in a team and guide the team to achieve their tasks. Able to work outside of organizational boundaries to engage external stakeholders as necessary
• Able to deliver results under tight timelines. Pro-active, quality conscious and results oriented.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Senior / Customer Service Associate, Group Contact Centre

As part of Group Contact Centre, the Senior / Customer Service Associate's key role is to provide Contact Centre services, such as handling of general enquiries, appointment scheduling requests, to patients and the public. You are expected to work in a fast-paced environment and be challenged with navigating complex healthcare needs. Reporting to the Institution Lead, Group Contact Centre, you will:

Job Responsibilities:

• Deliver excellent customer service to callers by understanding caller's needs
• Provide timely, accurate and appropriate information and assistance to address caller's enquiries
• Book or reschedule appointments based on caller's request
• Handle any other hotline administrative functions such as handling of emails, referral requests and emergency activation
• Coordinate and liaise with other departments in the institutions to ensure requests are followed up and resolved

Job Requirements:

• Minimum Diploma in any discipline. (Fresh graduates are welcomed)
• Preferably 1 to 2 years’ experience in healthcare industry, contact centre environment and/or service related industry
• Able to communicate fluently in English and Mother Tongue
• Able to read and write fluently in English
• Pleasant and cheerful personality with good interpersonal skills
• Able to adapt to fast pace working environment
• Computer literate and good typing skills
• Able to multi-task and work under a stressful environment
• Willing to work on rotating shifts, including PHs and weekend

Working Location:Choa Chu Kang Polyclinic / Ng Teng Fong General Hospital / The Synergy

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The team of Prof Loh Kian Ping invites application for a postdoctoral fellow/research fellow working in condensed matter physics and two dimensional (2-D) materials devices. A major research thrust is the synthesis and investigation of artificially engineered heterostructures of quantum materials synthesized by molecular beam epitaxy (MBE) with strong electron correlations which allow new emergent states to be created at the interface.

Requirements

The candidate should have a PhD in Physics and have experience in operating

1. Angle resolved photoemission spectrometer, and the collection and interpretation of results arising
2. Experience in the molecular beam epitaxy growth of 2D topological materials
3. UHV-scanning tunnelling microscopy/Q plus AFM

The candidate should have a strong track record in surface physics or condensed matter physics.

An attractive renumeration package will be offered for suitable candidate (research fellow) with a strong record in 2-D condensed matter physics and who has good publication record.

Summary of Role:
The candidate in this role is responsible for planning the supply of spare/maintenance/consumable parts to maintain optimum inventory levels (consumables, spares, etc.) and ensure the efficient running of the center. His other roles are being ISO certified and working on End Users Certifications (EUC).

Essential Responsibilities include:

• Plan and schedule Spare parts requirements based on demand plan/material requirement requests from Fabs.
• Regularly review inventory levels for specific categorization of materials.
• Regular monitoring of critical materials to ensure uninterrupted manufacturing.
• Coordinate with warehouse/logistics to ensure accurate inventory levels and stock availability.
• Publish essential spare parts metrics/KPIs to management on a timely basis.
• Derive the material requirement plan based on the master production schedule to procure and source.
• Good Knowledge of Inventory management.
• Oversee the department R&M/Chemicals, etc. stores – upkeep with house-keepings, periodic cycle counts.
• Maintain the inventory database, ensuring timely and accurate recordings.
• In charge of day-in-day-out logistics operations.
• Coordinate with and on the movement of materials.
• Must work closely with operation teams on the center's logistic needs.
• Ensure to adhere to zero safety requirements.
• Work on continuous improvement program in logistics operations.
• Ability to work in a multi-task environment.
• Providing day-to-day operations in FAB production material planning, inventory management, and procurement.
• Planned and monitored production schedule in the high-mix, low-volume environment (HMLV).
• Collaborate across departments in the planning process to plan and purchase materials requirements and meet the production plan effectively.
• Follow through with the orders from the start till delivery and ensure that goods are delivered on time.
• Ability to work in a multi-task environment.

Other Responsibilities:

• Perform all activities safely and responsibly and support all Environmental, Health, Safety & Security (EHS) requirements and programs.
• Support ISO certification and across suppliers' EUC requirements
• Support internal audit program by conducting ISO9001/TS16949 audits, gap analysis, and corrective action implementation
• Research best practices and conduct benchmarking related to QMS processes, methods, and tools
• Based upon the overall Quality System performance, identify critical systems or processes where quality improvements are required, initiate projects or activities to analyze, evaluate and propose solutions to address the problem and improve performance

Required Qualifications:

• Minimum of 5 years of professional experience in procurement, consulting, program management, and supply chain & inventory
• Direct experience in pricing and contract negotiations, supplier relationship management, business strategy, contract manufacturing/outsourcing, and continuous process improvement
• Communicate complex information clearly and concisely.
• Develop and maintain collaborative business relationships with stakeholders and align ISO/EUC requirements for the program.
• Interact with all levels of the organization.
• Perform in a very fast-paced environment.

Summary of Role:
The candidate in this role is responsible for planning the supply of spare/maintenance/consumable parts to maintain optimum inventory levels (consumables, spares, etc.) and ensure the efficient running of the center. His other roles are being ISO certified and working on End Users Certifications (EUC).

Essential Responsibilities include:

• Plan and schedule Spare parts requirements based on demand plan/material requirement requests from Fabs.
• Regularly review inventory levels for specific categorization of materials.
• Regular monitoring of critical materials to ensure uninterrupted manufacturing.
• Coordinate with warehouse/logistics to ensure accurate inventory levels and stock availability.
• Publish essential spare parts metrics/KPIs to management on a timely basis.
• Derive the material requirement plan based on the master production schedule to procure and source.
• Good Knowledge of Inventory management.
• Oversee the department R&M/Chemicals, etc. stores – upkeep with house-keepings, periodic cycle counts.
• Maintain the inventory database, ensuring timely and accurate recordings.
• In charge of day-in-day-out logistics operations.
• Coordinate with and on the movement of materials.
• Must work closely with operation teams on the center's logistic needs.
• Ensure to adhere to zero safety requirements.
• Work on continuous improvement program in logistics operations.
• Ability to work in a multi-task environment.
• Providing day-to-day operations in FAB production material planning, inventory management, and procurement.
• Planned and monitored production schedule in the high-mix, low-volume environment (HMLV).
• Collaborate across departments in the planning process to plan and purchase materials requirements and meet the production plan effectively.
• Follow through with the orders from the start till delivery and ensure that goods are delivered on time.
• Ability to work in a multi-task environment.

Other Responsibilities:

• Perform all activities safely and responsibly and support all Environmental, Health, Safety & Security (EHS) requirements and programs.
• Support ISO certification and across suppliers' EUC requirements
• Support internal audit program by conducting ISO9001/TS16949 audits, gap analysis, and corrective action implementation
• Research best practices and conduct benchmarking related to QMS processes, methods, and tools
• Based upon the overall Quality System performance, identify critical systems or processes where quality improvements are required, initiate projects or activities to analyze, evaluate and propose solutions to address the problem and improve performance

Required Qualifications:

• Minimum of 5 years of professional experience in procurement, consulting, program management, and supply chain & inventory
• Direct experience in pricing and contract negotiations, supplier relationship management, business strategy, contract manufacturing/outsourcing, and continuous process improvement
• Communicate complex information clearly and concisely.
• Develop and maintain collaborative business relationships with stakeholders and align ISO/EUC requirements for the program.
• Interact with all levels of the organization.
• Perform in a very fast-paced environment.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The team of Prof Loh Kian Ping invites application for a postdoctoral fellow/research fellow working in condensed matter physics and two dimensional (2-D) materials devices. A major research thrust is the synthesis and investigation of artificially engineered heterostructures of quantum materials synthesized by molecular beam epitaxy (MBE) with strong electron correlations which allow new emergent states to be created at the interface.

Requirements

The candidate should have a PhD in Physics and have experience in operating

1. Angle resolved photoemission spectrometer, and the collection and interpretation of results arising
2. Experience in the molecular beam epitaxy growth of 2D topological materials
3. UHV-scanning tunnelling microscopy/Q plus AFM

The candidate should have a strong track record in surface physics or condensed matter physics.

An attractive renumeration package will be offered for suitable candidate (research fellow) with a strong record in 2-D condensed matter physics and who has good publication record.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a first-of-its kind AI-assisted integrated NDT verification system for reusability of structural steel with accuracy of ±10% at confidence level of 95%. The key innovation is to use AI to analyse a bigger data set and build a multi-parameter machine learning (ML) model that integrate the complex mechanical properties obtained from DT and the electric/magnetic permeability data obtained from NDT to predict the critical material characteristics of reusable steels.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  1. Establishing test result database: Conducting both DTs and NDTs on the same samples to create a comprehensive dataset for AI model development, managing data collection processes on-site at the collaborator’s factory, and ensuring the accuracy and integrity of the collected data.
  2. Developing statistical model: Utilizing DT results to develop statistical models for estimating mechanical characteristics based on normal distribution and analyzing statistical data to support model development.
  3. Developing and verifying the AI model: Developing various regression models and evaluate their feasibility and suitability, conducting model fitting and verification phases using training and test datasets and ensuring the selected model meets the accuracy criteria (±10% at 95% confidence) for individual mechanical characteristics and overall classification results (grade determination).
  4. Validation of the method: Implementing the proposed method and AI model in test bedding cases, measuring the impact of the method in terms of time and cost savings and developing implementation guidelines based on validation results.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.
• Publish research findings in peer-reviewed journals and present at conferences.
• Assist in the preparation of project reports, proposals, and documentation.

Requirements

• Have relevant competence in the areas of structural engineering, material science, statistics and programming basics.
• Have a degree in Civil Engineering, Mechanical Engineering or Material Science. Possessing a Master’s or PhD degree will be advantageous.
• Knowledge of AI / ML and common ML programming languages will be advantageous.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work
• Able to carry out data preprocessing, develop statistical and regression models.
• Possess knowledge of the mechanical properties of structural steel and factors affecting its performance
• Able to prioritize tasks, meet deadlines, and manage multiple responsibilities.

Scientist for Advanced Photonics (Photonic device and PDK development)

As part of IME’s Photonics & Sensors Department, the candidate will work on photonic device and PDK library development. This will include photonic device simulation, fabrication, characterization, optimization, and PDK development. You will work closely with an excellent multidisciplinary team working on photonics, electronics, semiconductor processes, integration, and fab operation.

Responsibilities:

• Design of passive and active photonic devices based on various 8-inch and-12 inch material platforms.
• Take the lead in designing integration flows to manufacture the designed devices.
• Develop automated electro-optic characterization systems for the designed and fabricated photonic devices.
• Characterize photonic devices and perform design optimization to meet the required device performance.
• Develop PDK for optimized photonic devices.
• Prepare presentations and papers for internal meetings, conferences and journals.
• Collaborate with the project team to ensure quality and on-time delivery for various projects. You will get a chance to be exposed to both industrial and academic projects.
• Performs other duties as assigned.

Qualifications:

• PhD in Integrated Photonics, Microelectronics, Opto-electronics, Physics or equivalent.
• Experience in one or more topics listed below is strongly preferred: Si photonics, SiN photonics, compound semiconductor photonics, photonic computing, quantum computing, LiDar, optical switch array.
• Strong hands-on experience in photonic device development or photonics integration.
• Strong hands-on experience in photonic simulation using various electrical / photonics design software.
• Strong communication, industry awareness, and problem-solving skills.
• Strong self-motivation and interest in the next-generation photonics technology development.

Scientist for Advanced Photonics (Photonic device and PDK development)

As part of IME’s Photonics & Sensors Department, the candidate will work on photonic device and PDK library development. This will include photonic device simulation, fabrication, characterization, optimization, and PDK development. You will work closely with an excellent multidisciplinary team working on photonics, electronics, semiconductor processes, integration, and fab operation.

Responsibilities:

• Design of passive and active photonic devices based on various 8-inch and-12 inch material platforms.
• Take the lead in designing integration flows to manufacture the designed devices.
• Develop automated electro-optic characterization systems for the designed and fabricated photonic devices.
• Characterize photonic devices and perform design optimization to meet the required device performance.
• Develop PDK for optimized photonic devices.
• Prepare presentations and papers for internal meetings, conferences and journals.
• Collaborate with the project team to ensure quality and on-time delivery for various projects. You will get a chance to be exposed to both industrial and academic projects.
• Performs other duties as assigned.

Qualifications:

• PhD in Integrated Photonics, Microelectronics, Opto-electronics, Physics or equivalent.
• Experience in one or more topics listed below is strongly preferred: Si photonics, SiN photonics, compound semiconductor photonics, photonic computing, quantum computing, LiDar, optical switch array.
• Strong hands-on experience in photonic device development or photonics integration.
• Strong hands-on experience in photonic simulation using various electrical / photonics design software.
• Strong communication, industry awareness, and problem-solving skills.
• Strong self-motivation and interest in the next-generation photonics technology development.

Job Description :

• Contribute to teaching and mentoring of medical students and research PhD students where applicable
• May have substantial involvement in overseeing core research facilities and technology implementation improvement.

Job Requirements:

• PhD in statistics /biostatistics/quantitative field
• 3 – 5 years’ experience using STATA/SAS/SPSS, preferably in a clinical research environment.
• Competency in general statistical theory and methods
• Strong analytical and problem-solving skills
• Demonstrated ability to communicate well with others (clinicians and statisticians), both verbally and in writing.
• Ability to teach and demonstrate software applications

We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• To organize and implement research plans, development of methods of research, testing and data collection, analysis and evaluation, and report writing.
• Knowledge on gas hydrates or is highly desirable
• To assist the principal supervisor in management of the lab.
• To ensure that all safety guidelines are followed in the research
• To undertake any other duties relevant to the research

Job Requirements

• Master’s Degree and above in Chemical Engineering
• Research experience on gas hydrate and their applications specifically to macro-scale experimental measurements
• To handle high pressure equipment and instruments like PID controllers.
• Knowledge on operation, calibration and analysis of gas chromatography results
• Highly efficient, good communication and oral skills
• Strong ability to work in a multidisciplinary team