Nanyang Environment and Water Research Institute, NTU is looking for a Research Fellow with expertise in heterogeneous catalysis to develop improved catalyst formulations for conversion of plastic waste into carbon nanotubes and hydrogen.

The project is funded by National Environment Agency, Singapore to address one of the largest problems in waste management – the problem of plastic waste pollution. A significant fraction of plastic waste has substandard quality for mechanical and chemical recycling even after sorting and cleaning. The Research Fellow will use pyrolysis-chemical vapor deposition (CVD) technology for converting these plastic waste streams (specifically, contaminated and rejected plastics) into multi-walled carbon nanotubes (MWCNTs) and hydrogen. The role of Research Fellow is to develop catalysts that will allow to reduce catalyst cost and increase carbon nanotubes yield to make the process more economically viable.

Key Responsibilities:

The candidate will be undertaking full research work and administrative duties during the term of employment within the following areas:

• Catalyst formulation and testing in pyrolysis-CVD process;
• Liaising with toll manufacturers regarding the feasibility of scaled up catalyst production.
• Cost-benefit analysis for the developed catalyst(s).
• Publishing research papers and documenting developed intellectual property. Reporting the progress to stakeholders (internal and external).

Job Requirements:

• Ph.D. degree in a field relevant to heterogeneous catalysis (e.g., Chemical Engineering, Materials Science, Environmental Engineering or other).
• PhD thesis or postdoctoral experience related to heterogeneous catalysis for at least one of the following areas: (a) catalytic waste conversion into carbon nanotubes and hydrogen, (b) catalytic single-walled and/or multi-walled carbon nanotube synthesis from any feedstocks.
• First-author publications in the areas mentioned above.
• High proficiency in English (e.g., TOELF, IELTS, GRE) for preparation of research papers
• Ability to prepare well-written technical reports and research papers.
• Ability to prepare decent quality presentation decks, figures and illustrations.
• Ability to build formal and informal partnerships and work collaboratively with others to meet shared objectives.
• Ability to consistently achieve results even under challenging circumstances and understanding what needs to be done to deliver the project.

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Provides assistance to the research team

• Screens and recruits suitable patients to participate in the research project

• Briefs patients on research background and rationale and to obtain their consent of participation

• Collects data from patients' medical records and research statistics

• Helps document adverse events / reactions that arise

• Performs phlebotomy and venepuncture when required

Requirements:

• Minimum Degree/ Diploma in Nursing

• Min 3 years’ experience in Hospital ward

Only Nurses with SNB license NEED APPLY

Interested candidates please send a copy of your resume in MS Word to

[email protected]

EA Personnel: Valerie Yong Kian Fung (R1103704)

Company Reg. No. 199601303W

EA Licence No. 99C4599

Roles & Responsibilities:

• Manage and plan the well-being management of key stakeholder
• Provide individualized patient-focused care, including regular glucose and blood pressure checks, lifestyle and dietary management
• Provide medical and physical care to key stakeholder whilst on travels

Requirements:

• At least 5 years of proven nursing experience. Having experience as a Paramedic would be a plus.
• Have medical knowledge especially about emergency and cardiology.
• Demonstrate competency in nursing core and special skills.
• Possess a caring and positive attitude.
• Possess at least a Diploma/Degree in Nursing
• Ad-hoc overseas travelling whenever required

Others:

• On roster, no night shift
• Perm and attractive pay

COMPANY DESCRIPTION

Since October 2011, Thye Hua Kwan Moral Charities (THKMC) was incorporated as a charity with an IPC status to provide multiple social and welfare services to the community at large.

THKMC provides assistance to the various groups in our community through more than 60 programmes and services for the elderly and the sick, families, persons with disabilities, and children. We help anyone in need with full respect to their race, colour, creed, language, culture and religion. We have more than 90 programmes and services, reaching out to more than 55,000 people in the community.

Together, as ONETHK Empowering the Community.

RESPONSIBILITIES

• Give nursing care, including medication, treatment and dealing with emergenciesas well as supervision of the personal hygiene of the residents;
• Teach, guide and discipline the resident;
• Ensure the general cleanliness of the premises;
• Ensure that the treatment room, sickbay, time out room and nurse's station arekept clean and tidy

Duties

• Screen, treat and provide nursing care to sick residents;
• Attend/carry out routine procedures for all new admissions and residentsreturned from absconding;
• Refer sick residents for medical examination by the doctor;
• Arrange the appointment cards and transport of residents attendingappointments at hospitals and polyclinics;
• Follow-up on residents who have been referred to hospitals;Update the residents' medical cards daily eg. diagnosis, treatment, transfer,appointments and discharges from hospitals;
• Serve medication to residents and supervise residents at meal times;
• Give first-aid treatment for emergency cases;Refer ill residents to hospital in the absence of the doctor;
• Supervise Assistant Nurses, Nursing Aides and Health Attendants in their work;
• Supervise the needs of residents who are attending morning school or going to work;
• Carry out necessary investigation arising from any incident that had taken place in the Home and update the Superintendent and Manager;
• Order and maintain supplies and equipment;
• Perform any other duties as may be assigned by the Superintendent from time to time.

• Recognised nursing qualification and registered with the Singapore Nursing Board

• Preferably candidate with at least 1 yr of working experience;
• Comfortable working with children and adults with multiple disabilities;
• Able to perform rotating shiftWork location: Chai Chee / Sembawang / Eunos

[Job ID: 768323]

Responsibilities:

• Accurately document patients’ physical assessments, including height, weight, visual acuity, audiometry, and nursing observations.
• Adhere to strict infection control protocols and maintain aseptic techniques when caring for patients.
• Conduct regular inventory checks of medical equipment, surgical supplies, and instruments.
• Gather laboratory results, X-ray reports, and specialist feedback for review.
• Follow up with physicians regarding lab, X-ray, and other diagnostic results for further evaluation.
• Ensure timely availability of results and promptly inform the doctor of any urgent or abnormal findings.
• Manage clinic emails, phone calls, patient inquiries, and coordinate patient appointments and bookings.
• Register new patients, update their records, and send timely appointment reminders.
• Handle insurance claims and manage coverage for consultations, treatments, medications, surgeries, or hospital admissions.
• Communicate with Japanese insurance companies to secure Letters of Guarantee (LOG).
• Liaise with specialist clinics, hospitals, laboratories, and radiology departments for billing purposes.
• Follow up on outstanding payments from corporate clients, insurance companies, and self-paying patients.

Requirements:

• Must be registered with the Singapore Nursing Board.
• At least 1-2 years of experience in a clinic or general hospital setting.
• Skilled in setting up and performing IV cannulation.
• Proficient in Microsoft Excel.
• Able to work effectively under pressure.
• Knowledge in Platos System

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.
Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/
EA Personnel Name: Sandy Ng Mei Qi
EA Personnel Registration Number: R24125475
EA License No.: 07C5771

[Job ID: 768323]

Responsibilities:

• Accurately document patients’ physical assessments, including height, weight, visual acuity, audiometry, and nursing observations.
• Adhere to strict infection control protocols and maintain aseptic techniques when caring for patients.
• Conduct regular inventory checks of medical equipment, surgical supplies, and instruments.
• Gather laboratory results, X-ray reports, and specialist feedback for review.
• Follow up with physicians regarding lab, X-ray, and other diagnostic results for further evaluation.
• Ensure timely availability of results and promptly inform the doctor of any urgent or abnormal findings.
• Manage clinic emails, phone calls, patient inquiries, and coordinate patient appointments and bookings.
• Register new patients, update their records, and send timely appointment reminders.
• Handle insurance claims and manage coverage for consultations, treatments, medications, surgeries, or hospital admissions.
• Communicate with Japanese insurance companies to secure Letters of Guarantee (LOG).
• Liaise with specialist clinics, hospitals, laboratories, and radiology departments for billing purposes.
• Follow up on outstanding payments from corporate clients, insurance companies, and self-paying patients.

Requirements:

• Must be registered with the Singapore Nursing Board.
• At least 1-2 years of experience in a clinic or general hospital setting.
• Skilled in setting up and performing IV cannulation.
• Proficient in Microsoft Excel.
• Able to work effectively under pressure.
• Knowledge in Platos System

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.
Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/
EA Personnel Name: Sandy Ng Mei Qi
EA Personnel Registration Number: R24125475
EA License No.: 07C5771

Job Description:

• Prepare for patient appointment by obtaining required information such as lab results, medical record and other information as required.
• Monitoring the patient during the treatment and procedures and providing nursing care as needed.
• Pre-screening duties such as drawing blood.
• Assist medical providers during treatment and procedures.

Requirement:

• Minimum Diploma/ Degree in Nursing
• Minimum 1 year inpatient ward experience will be advantages

Interested applicants, kindly furnish us with your detailed resume in MS Words format and click "Apply Now" button.

** We regret to inform only shortlisted candidates will be notified. Applicants who do not possess necessary experience or qualification will still be considered on individual merits and may be contacted for other opportunities.**

**JobStudio will not solicit any money, request to use your bank account for business or request you to transfer any monies to any parties. Please be aware of scams impersonating JobStudio and our employees. You may call our office directly for verification. We will not be liable for any loss arising from scams. **

JOBSTUDIO PTE LTD

EA License No: 10C4754

EA Personnel: Kam Xiu Ping

EA Personnel Reg No: R21101828

• Well Established Company
• Basic $4500 - $5200 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Work closely with relevant teams to gather necessary data and collaborate on pricing initiatives
• Develop appropriate prices for new products and updates to existing products
• Assist in product profitability analysis, taking into account production costs, marketing expenses, and sales volumes
• Recommend pricing adjustments to enhance product profitability
• Assist in pricing review and reports
• Monitor pricing performance to ensure pricing data consistency and accuracy
• Generate reports and dashboards to track KPIs
• Conduct thorough pricing analysis to evaluate historical pricing trends, price elasticity, and product performance
• Utilize data insights to identify opportunities for price optimization
• Generate well-developed, accurate quote proposals
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s degree in any discipline, with minimum 2 years relevant experience in product pricing, market research or analytical role

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

The Role

The successful candidate will lead the planning and implementation of future-enabled enterprise architecture projects for JRI Singapore, and APAC region including Singapore, aligned to requirements of SMBC, in cooperation with Tokyo Head Office, the current product owner.

He/she will work closely with stakeholders mainly from Japan Head Office, end users, system development depts, company back-office depts, vendors and establish effective and efficient collaboration.

Job Responsibilities

• Lead, manage and implement end to end identified future enabling projects through technical/functional/operational design and maintenance of IT Infrastructure according to the Company’s project governance framework.
• Contribute to the development of overall End User Computing Services, Server platform (Dynamics, DevOps, Dev Servers and Windows domain environment), L2/L3 network and WAN.
• Plan for IT security measurement in the office, collaborating with Japan Head Office security department and CCoE (Cloud Center of Excellence).
• Plan and lead IT system implementation projects which involve variety of the IT and non-IT department located in Tokyo and Singapore to enhance the banking IT capability from regional perspective.
• Organize and facilitate project budget/cost related matters with proper understanding of differences between Singapore and Japan accounting policy. (IFRS/SFRS v.s. JGAAP).
• Provide timely escalation and resolution of major issues to Management and Head Office teams.
• Work closely with business depts and other stakeholders to understand business and IT operational requirements, translating them to technical requirements.
• Partner with planning dept to ensure alignment of all company platform’s architecture processes, standards, strategies and roadmap with that of JRI and SMFG Group.
• Collaborate with Japan Head Office to establish internal control in which an entity is managed and governed.
• Prepare and present regular project reports and documentations.
• Prepare and put forward budget plans for identified project initiatives, influencing, and negotiating with Head Office to obtain support for them.
• Ensure project status and progress are communicated to stakeholders and IT teams in a timely and concise manner.
• Work out full-scaled and precise proposal with technical solution team, coordinate and communicate resources and define clear roles with all project resources.
• Assume agreed projects that may be assigned from time to time in tandem with business priorities/requirements.

Job Requirements

• Bachelor’s Degree in Information Technology, Computer Science or equivalent with around 5 years of experience in providing IT service to a Financial Institute.
• Knowledge in IT system infrastructure for large number of transaction volumes and/or users.
• VMware certification – Security certifications and CCNA certification are desired for the role.
• ITIL v3 Foundations Certification.
• Microsoft certification – Intune, Microsoft 365 mobility and security, Managing Modern Desktops, Modern Desktop Administrator, MS Azure certification, MCSA/MCSE.
• Proficiency in both English and Japanese is highly preferred as this role needs to prepare reports in Japanese for reporting to Head Office in Japan. This role also needs to present and communicate with stakeholders and counterparts in Tokyo Head Office who mainly communicate in Japanese.
• Experience to handle regional projects which involves stakeholders in Japan.
• Experience in supporting IT End User Service in large organization.
• Proven experience in collaboration and workgroup for project delivery
• Experience in internal control or audit area with a deep understanding of the IT business process and systems.
• Project Management certification (e.g. PMP, PRINCE2) or equivalent experiences
• Knowledge of IT service business for bank or FI.
• Comprehensive knowledge of technologies supporting asset management processes.
• In-depth knowledge on MS 365, Group Policy, AD Trusts, AD Sites and Services, DNS, DHCP, and DFS.
• In-depth knowledge on Microsoft Licensing, SCCM, PC/laptop hardware and software delivery.
• Capability to lead and drive the IT BAU related tasks with good time and stakeholder management skills and experience.
• Proactively socialize with stakeholders and maintain good relationship to steer tasks.
• Possess strong and assertive verbal, written communication skills and presentation skills.
• Ability to work in a fast-paced environment with constantly changing priorities.
• Good bi-directional and collaborative attitude in order to work as a professional in a team.
• Willing to take an ad-hoc project as necessary.

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Position Summary:

As a Materials Planner at Lam, you will be responsible for planning and monitoring the materials and products used by the Account team. Ensure that the region doesn't run out of the materials/parts needed to support our customers. Portfolio includes managing the flow of inventory and make sure products are properly shipped to customers. Partnering with the Account team, you set up a business process for determining proper stocking and replenishment level and representing the region to the corporate to get the required stock.

Job Responsibilities:

• Partner the Account team to understand the business requirements (demand forecast drivers) to determine proper stocking and replenishment level. Represent the region to the corporate team to get the required resources
• Work with external customers, internal account team and field service personnel to determine replenishment systems/processes, issue and receipt procedures, required inventory control policies and procedures, management information system to support material availability control and distribution to the Field
• Responsible for overseeing the inventory management process, defining appropriate inventory levels, eliminating obsolete and off-spec material and reduce aging material
• From historical usage develop and maintain plan for every part. Use the plan for every part data to update and maintain SAP for forecasting purposes.
• Develop and enforce business processes and work flows to enable efficient and effective operations
• Any other duties as assigned by the Immediate Supervisor

Job Requirements:

• Bachelor in Engineering or equivalent, Incumbents with no prior experience are welcome to apply
• 3-5 years relevant experience
• Possesses strong inter-personal and communications skills. Experience in dealing with difficult work partners
• Commands good oral and written English
• Demonstrated independent work initiative, sound judgment, diplomacy, analytical ability and professional demeanor
• Knowledge of SAP system is an advantage

Position Summary

Your main role will be to ensure that Lam Research comply with regulatory and safety requirements. You will be is responsible for administering and coordinating the organization’s Workplace Safety and Health Management Systems, processes and policies. This will include conducting safety inspections, closing audit findings, reviewing workplace risk assessment and coordinating safety training for all personnel.

Job Responsibilities:

• Enter, inspect and examine worksite for potential safety violations/hazards; (WSH Reg)
• Inspect and examine any machinery, equipment, plant, installation or article in the worksite for potential violations / hazards; (WHS Reg)
• Assess the level of noise, illumination, heat or harmful or hazardous substances in the worksite and the exposure levels of persons at work; (WSH Reg)
• Investigate any accident, dangerous occurrence or occupational disease that occurred within the worksite. Coordinate with management, customers and relevant authorities when an incident / accident occurred
• Employ risk mitigation strategies, and environmental and safety requirements for the business unit;
• Identify safety lapses and provide solutions to improve. Execute to aligned action plans to close the identified gaps;
• Conduct audits to ensure conformance to Lam’s and customers’ safety requirements, policies and procedures;
• Conduct safety briefings (as appropriate) including representing Lam Research at customer meetings on issues relating to EHS;
• Report/ assist in any accident / injury/ near misses’ investigations
• Establish mechanisms to implement and monitor compliance requirements such as advise and assist with job analysis, risk assessment, job instruction training, safe work procedures, method statement
• Establish tracking and ensure that all Lam personnel attend required training such as CSOC (Construction Safety Orientation Course) and other related EHS (Environmental, Health & Safety) training for employees, including new hires, contractors and loaners from other countries;
• Take appropriate action to halt any conditions that may result in imminent hazard to persons, property, or the environment;
• Perform the role of Safety Assessor for the inspection/ assessment of Permit-to-work system
• Notify the local EHS manager of any unresolved compliance issues and situations, and seek EHS guidance in implementing corrective actions as needed; facilitate and promote the exchange of information within the business unit and with EHS in the interest of collaborative problem solving and program improvement;
• Represent the business unit on EHS committees (Customer meetings) and provide regular briefings to business unit management and the local EHS manager on the unit’s environmental and safety program status, trends and risks.
• Identify PPE (Personal Protective Equipment) requirements and sourcing of approved supplier for procurement
• Assist in applying special permits if certain work is required (e.g. hot work, working at tall heights etc), including facilitating the application / renewal of licenses and liaise with relevant authorities/bodies for license / permit issue
• Maintenance of worksite safety records, certificates, notices and documents (WSH Reg)
• Manages internal WSH systems, coordinates government agency or customers visits, inspections and compliance audit at the workplace and submit audit reports to relevant stakeholder for review (Customs, Foreign Trade, Biz Safe, MOM)
• Point of contact for physical security in Singapore Office
• A key member of the SEA BCP (Business Continuity Plan) team, responsible to ensure that the business continuity plan is up to date and support the coordination of annual BCP tabletop exercise.
• Lead a team of contract EHS officer / coordinator, ensuring that adequate resources are deployed to support different customers sites.
• Any other Safety, Health and Environmental related duties as assigned by the Immediate Supervisor

Job Requirements:

• Bachelor’s degree or equivalent
• Processes relevant qualification recognized ty the Ministry of Manpower
• Must be a registered Workplace Safety and Health (WSH) Officer with the Ministry of Manpower
• At least 10 years’ experience handling a WHS in a manufacturing site, preferably in the electronic or semiconductor industry
• Possesses strong inter-personal and communications skills, both in written and spoken English
• Comfortable to interact with people of diverse backgrounds
• Is meticulous and maintains detailed and accurate records
• Possesses good analytical and problem solving skills

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Chugai Pharmabody Research Pte. Ltd. (“CPR”) was established in Singapore as a wholly-owned subsidiary of Chugai Pharmaceutical Co., Ltd (Chugai), a member of Roche group, in January 2012 and started operations on July 2, 2012. Located at Biopolis in Singapore, it aims to generate new antibody drugs based on Chugai’s proprietary antibody engineering technologies, such as recycling antibody®, sweeping antibody®, bispecific antibody.

Position – Senior Scientist in Pharmacology Unit

CPR is seeking a Ph.D. Scientist with expertise in in vitro and in vivo pharmacology studies. The candidate will also be responsible for disease target validation and have a strong background in the area of oncology. The candidate will lead antibody screening for a drug discovery project. Depending on the experience and opportunity, the candidate will also lead antibody drug discovery project and participate in strategic discussions to advance programs through pipeline.

Responsibility

The applicant should be highly skilled in some of the following areas:

· Design and conduct experiments to investigate novel therapies

· Mentor junior researchers and research associates

· Propose a new drug discovery project

Job Requirements

The applicant should be highly skilled in some of the following areas:

• Proficiency in cell culture techniques with various cell lines
• Expertise in molecular biology techniques (generation of cell lines with overexpression, knockdown, and knockout of a gene, PCR, qPCR, Western blotting, ELISA)
• Experience with flow cytometry and cell sorting
• Knowledge of cell lines and animal models in cancer research
• Primary cell isolation and culture techniques
• Experience with drug discovery research would be highly advantageous
• Three to five years of post-doctoral research experience in oncology would be highly advantageous.

The applicant must have completed and be awarded with a relevant Ph.D. degree in Science or related field (not in the process of achieving it) with 1-2 years of working experience in a related field. In addition, the successful candidates must be able to demonstrate their molecular and cellular biology expertise as evidenced by projects, presentations, or peer-reviewed scientific publications.

Scientists with strong passion in medical science for creating and delivering innovative drugs to society which leads to saving patients suffering from unmet medical needs are highly desired. Familiarity or having prior work experience in antibody drug discovery work will be a plus, although not absolutely necessary. You should also possess good command of spoken and written English, excellent organizational and communication skills, team player mindset, as well as the ability to perform multi-task.

Interested applicants are invited to email their detailed resume, as well as their qualifications, availability, current and expected salary to: [email protected]

For more information regarding our Company, you may refer to our website at:

http://chugai-pharmabody.com/

We regret that only short-listed candidates will be notified

Responsibilities

The Research Analyst will primarily be responsible for generating investment ideas in his/her assigned area of market coverage, and communicating these ideas to the investing public predominantly through original research articles and presentations.

• Conduct fundamental research within assigned area of market coverage using publicly available information sources, including financial statements, company annual reports, published research, and online databases
• Generate high-conviction investment ideas (including stocks, unit trusts, and ETFs) across various geographical markets and/or sectors. Work with other members of the research team to evaluate a comprehensive range of active and passive products.
• Communicate these ideas to the investing public, as well as internal stakeholders, through various channels, including original research articles and seminar presentations.
• Participate in discussions and contribute ideas to portfolio decision-making within the team’s disciplined investment process.
  

Requirements

• Bachelor degree holder in a related discipline (accountancy, finance or business administration), preferably with at least one year of investment research experience. Fresh graduates with the right aptitude and attitude are welcomed to apply for this position.
• Strong analytical skills, with a deep understanding of financial statements and equity valuation methodologies. Able to distil large amounts of information into an investable thesis.
• Excellent command of both spoken and written English, with a great story-telling ability.
• Demonstrated interest in and passion for investing
• Able to multi-task and meet constant deadlines

A Corp Lab in NTU is looking for a motivated Research Engineer to conduct cutting-edge research in the topic of “Green Cloud Computing”.

Key Responsibilities:

• Develop and implement the data and model interface for the AI/Data Twin platform with IoT or BMS systems.
• Debug and deploy the AI/Data Twin platform in on-site or cloud environments.
• Collaborate with the team to develop automation tools to optimize integration and deployment processes.
• Regularly maintain deployed platforms and perform data analysis.
• Prepare system delivery documents and maintenance reports.
• Quickly identify issues and develop solutions.

Job Requirements:

• Bachelor’s or Master’s degree in Computer Science, Automation, or a related field.
• 2-3 years of experience in DevOps and IT systems maintenance (Linux).
• Proficient in operating systems, Docker, and Kubernetes.
• Skilled in Shell programming and fundamental Python programming.
• Familiar with cloud platforms such as AWS and Azure.
• Understanding of DevOps and automated testing tools, such as Ansible and Selenium.
• Excellent communication and problem-solving skills.
• Priority given to those with a background in power systems or cooling systems.
• Ability to quickly learn new technologies.

We regret that only shortlisted candidates will be notified.

The School of Mechanical & Aerospace Engineering (MAE) is a robust, dynamic and multi-disciplinary international research community comprising of world-class scientists and bright students. MAE prides itself in its excellent research capabilities in areas including advanced manufacturing, aerospace, biomedical, energy, industrial engineering, maritime engineering, robotics, etc. The school is equipped with state-of-the-art research infrastructure, housing a comprehensive range of cluster laboratories, test bedding facilities, research centres/institutes and corporate laboratories. Cutting-edge research in MAE addresses the immediate needs of our industries and supports the nation’s long-term development strategies. In the new era of industrial 4.0 and sustainable living, MAE is rigorous in developing new competencies to support the growth and competitiveness of our engineering sector in the global landscape. MAE has grown to be leader in Engineering Research, ranking amongst the top engineering schools in the world.

For more details, please view https://www.ntu.edu.sg/mae/research.

Key job purpose

• Conduct investigations on the bonding and debonding of adhesively bonded composite joints with modified adhesives via induction heating by developing a in-situ heating – peeling testing device.

Key Responsibilities:

• Deep drive into the modification of adhesives with magnetic particles and investigate the hysteresis heating response under the induction heating.
• Able to fabricate the long fiber reinforced composite materials with modified adhesives for their joining and investigate the debonding response Develop necessary test matrix to do comprehensive parametric studies
• Develop in-situ induction heating and debond test set-up for the peel tests.
• Capabilities in advanced finite element or machine learning tools for process optimisation
• Disseminate the research outcomes into Journal publications, conference presentations and patents, where appropriate.

Job Requirements:

• PhD degree in materials engineering or mechanical engineering or chemical engineering with good relevant track record and experience.

We regret to inform that only shortlisted candidates will be notified.

About TUMCREATE

TUMCREATE is a multidisciplinary research platform of the Technical University Munich (TUM) at the Singapore Campus for Research Excellence and Technological Enterprise (CREATE). We are joining forces with universities, public agencies, and industry for the advancement of future technologies.

Our large-scale Food Science program, ‘Proteins4Singapore,’ funded by Singapore’s National Research Foundation (NRF), is a collaborative effort between the Technical University Munich (TUM), Nanyang Technological University (NTU), the Singapore Institute of Technology (SIT), and A*STAR’s Singapore Institute of Food and Biotechnology Innovation (SIFBI). As part of the Proteins4Singapore team, you will work alongside renowned scientists in plant and food technology, food chemistry, materials science, and business sustainability. Through interdisciplinary collaboration, the program aims to develop state-of-the-art methods and techniques to ensure a sustainable protein supply for highly urbanized environments.

Please visit www.tum-create.edu.sg for more information about TUMCREATE.

Job Summary

We are seeking a highly motivated and skilled Research Fellow to join our dynamic research team focusing on designing, adapting, and implementing cutting-edge mechanical and electronic systems for a decentralized food manufacturing model. As part of the Proteins4Singapore project, this role involves on utilizing simulations and advanced control systems to optimize and ensure quality in novel food textures and forms. This position plays a critical role in advancing sustainable protein solutions for urban environments through interdisciplinary collaboration, drawing expertise from mechanical engineering, mechatronics, and food engineering. This is a 1-year contract with the possibility of extension after the first year.

Key Responsibilities

• Develop a closed-loop control system to synchronize high-moisture extrusion and shape manipulator systems with a seamless integration and quality assurance.
• Integrate a variety of non-invasive sensors for a continuous and active monitoring on a food shape manipulator system.
• Develop and adapt custom firmware to integrate extrusion, in-line monitoring and control system with software protocols.
• Work closely with interdisciplinary teams to combine multiscale structural analysis with food processing methods, such as 3D printing and extrusion, supporting the project’s overarching goals of promoting sustainable food technologies and creating novel approaches for analyzing food texture.
• Engage in collaborative research, data analysis, and interpretation, while contributing to the writing of research papers, reports, and presentations for dissemination at conferences and in peer-reviewed journals.
• Participate in lab meetings, seminars, and collaborative research discussions to align with project goals and objectives.
• Supervise junior group members including undergraduate and doctoral students.

Key Competencies

• Proficient in firmware and software development, with experience in real-time systems, control algorithms, and open-source platforms.
• Strong background of at least 3 years in mechatronics, electronic systems, and automation; ideally experience with CFD, FEM simulations, and rheology for material flow analysis.
• Experience with food processing technologies, particularly food-grade and semi-solid materials, and a focus on safety and user-centric design.
• Publication as key author in related journals.
• Excellent communication skills, both written and verbal, in particular communication of complex scientific concepts to both specialists and non-specialists in a multidisciplinary research environment.
• Proven ability to conduct independent research and collaborate in multidisciplinary teams including working effectively within deadlines.
• Self-motivated and adaptable, with strong problem-solving skills and the ability to thrive in a dynamic, fast-paced research environment.

Qualification Requirements

• Ph.D. in Mechanical Engineering, Mechatronics, Food Processing, Industrial Engineering, or cognate discipline from a reputable university.
• Demonstrated ability in firmware programming and real-time process control integration.
• Strong communication skills, both verbal and written, with the ability to document processes and present findings effectively.

What we offer

• A collaborative and inclusive research environment.
• Access to state-of-the-art laboratory facilities and equipment.
• Opportunities for professional development and career growth.
• Engagement with a leading research team committed to advancing an emerging topic of global relevance.

Applications

Please send your complete application including a cover letter and detailed CV to [email protected].

Only shortlisted candidates will be contacted.

We are looking forward to your application!

DxD Hub QARA Team is seeking candidate to join the QARA team to support QMS implementation in design and development of software as medical device.

Candidate will receive training in the following areas:

• Understanding concept of ISO 13485:2016 standard and the impact of the requirements on lab operations.
• Management of Change.
• Management of deviation and nonconformity.
• CAPA and root cause analysis.
• Key concepts in IEC 62304/ISO 14971/IEC 62366.
• Software life cycle.
• Software safety classification.
• Conducting risk assessment and usability engineering study.
• Documentation requirements in software design and development .

Candidate will be supporting the QA and lab operations team in the following:

• Provide QA support to the software development team in their design and development activities.
• Participate in audit, when applicable.
• Raise NCR, conduct CAPA process.
• Draft/review software validation protocol/report .
• Draft/review project document.
• Other QA operations role, for example, drafting and reviewing SOP, material inspection.
• Assist in cross division work on ad hoc basis.

Job Requirements:

• Bachelor’s degree in Science or Engineering. Candidates with no experience may apply.
• Basic knowledge in programming.
• Working knowledge in Microsoft office.
• Good communication and presentation skill.
• Individual who is organized, highly motivated and results driven.
• Possesses intellectual agility and a strong team player.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

To lead the nursing team and related healthcare workers in the ward, and be responsible for the day-to-day operational work flow in the Nursing Department.

• Is responsible for the compliance of all nursing standards as stipulated by MOH and SNB.
• Leads quality assurance activities to monitor and evaluate the quality and appropriateness of nursing care. Ensures quality audits and planned and conducted periodically. Follow up with areas of corrective improvements.
• Ensures written policies and procedures and work process are available and up to date to guide the provision of nursing care.
• Monitor the smooth transition of the residents from acute to chronic care and back to the community, where possible.
• Direct care of the residents to ensure compliance to standards.

Job Requirements:

• Diploma / Degree in Nursing
• Registered Nurse with Singapore Nursing Board
• At least 2 years relevant experience in surpervisory roles
• Good public relations and communication skills
• Proficient in Microsoft Words, Excel, Power Point and Outlook
• 5 days work week on roster

Check out http://abercare.sg/jobs-vacancies/ for more details

Interested applicants may email your updated resume to [email protected].

Abercare.sg | EA License No. 18C9070 | KOH SU WEN, CLARISSA| Registration No. R24119504

Job Description :

We are looking for candidates to join the fusion-energy effort in the newly formed Future Energy Acceleration & Translation (FEAT) Programme, A*STAR. FEAT's plasma physics team focuses primarily on plasma diagnostics, microwave and radiofrequency (RF) heating and current drive (H&CD), and exhaust, with an emphasis on solving the challenges faced by future fusion energy systems. The new hires will be expected to contribute to, and potentially lead, research in magnetic confinement fusion. This includes analytical, computational, and experimental approaches, with the particular emphasis dependent on one's interests and skill set. While the new hires will begin by working on existing projects, participation in grant calls as a principal investigator will be highly encouraged.

We are looking to fill several positions in:

• Plasma diagnostics, including experimental, computational, and AI approaches.
• Theory and simulation of microwave and RF H&CD.
• Theory and simulation of plasma-material interactions, including edge turbulence and transport, sheaths, and sheath-edge coupling.

The key scope of work includes:

• Understanding the physics of fusion plasmas, exhaust, plasma diagnostics, and/or RF H&CD.
• Publishing peer-reviewed papers.
• Writing grants and developing the direction of fusion research in FEAT.
• Supporting local and international collaborators in fusion research.
• Supervising students and interns (optional).

Job Requirements:

• PhD in Physics, Plasma Physics, or equivalent, with a background in magnetic confinement fusion, such as in plasma physics and/or engineering.
• Deep knowledge in at least one of the followings:
  1. Plasma diagnostics (including hardware experience). Candidates with an experimental inclination will have the opportunity to travel to international collaborators' experiments for extended periods.
  2. Theoretical plasma physics (such as plasma waves, turbulent transport).
  3. Computational plasma physics (such as full-wave, beam tracing, fluid dynamics, gyrokinetics).
• Proficiency in programming languagues such as, but not limited to, Python, C/C++, and Julia.
• Good interpersonal and communication skills both oral and written, ability to adapt and work effectively as a member of a team.
• Resourcefulness and self-motivation with a high degree of professional integrity

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Staff Nurse

• Location: Pasir Panjang
• Working timing : 44 hours (office hours)
• 5.5days (to be discuss)
• 8am to 4pm || 9am to 5pm || Sat 9a to 1pm
• $2,800 - $3,800

Job Responsibilities:

• Perform patient assessment.
• Coordinate patient care and provide quality nursing care for an assigned group of patients.
• Demonstrate competency in clinical nursing skills and knowledge
• Provide patient education for family members.
• Record and maintain proper accurate documentation of patient's progress.
• Assists doctors and attend to emergency calls whenever necessary.
• Perform appropriate interventions for effective patient's outcomes.
• Manage and monitor medical supplies, equipment and consumables inventory
• Practise safety and infection control precautionary measures
• Participate in patients' rehabilitation, involving the patients' family.
• Manage rendered in the notes, medication records and charts of patients.
• Participate in medical emergencies or crisis situations as appropriate.

Job requirements

• Diploma in nursing , SNB registered
• With relevant experience

Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

A*STAR Infectious Diseases Labs (A*STAR IDL) is seeking for a Principal Scientist to join us in our mission to be a leading centre of infectious diseases research. A*STAR IDL aims to develop a cohesive A*STAR response to drive and deliver translational infectious diseases research to better health and economic outcomes.

Job Description:

• Leads conceptual and technical integration of various research studies to provide leading edge solutions in antimicrobial resistance (AMR) research and development
• Conceptualize and create new technologies, patents and publications
• Review and manage operating budget of grants and team
• Establish collaborations, develop scientific proposals and ensure timely achievement of project milestones
• Manage a team and provide scientific and career mentorship to researchers and students

Job Requirements:

• PhD in Biomedical Sciences, Life Sciences, Microbiology, Molecular Biology, Infectious Diseases, Immunology or related field as above
• 4 years of post-PhD relevant experience
• Strong background in Microbiology, Immunology, Molecular Biology, Biochemistry, Genetics and Genomics
• Strong publication record
• Highly motivated and ability to develop strong research ideas to secure grant and funding
• Strong analytical, technical and problem-solving skills
• Team player with good interpersonal skills
• Good spoken and written communication skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.