MedTech Catapult is a national initiative for accelerating the development of high-value MedTech projects through an in-house product engineering unit. This productization unit is responsible for supporting the development of technologies through the medical device development cycle to produce full-fledged hardware product systems.

The Lead Engineer will report to the Lead, Product Engineering.

Job Responsibilities

• Responsible for software engineering efforts for integrated medical technology product solutions.
• Responsible for software architecture design and FW requirements specifications generation.
• Design, develop and implement embedded SW for medical instruments and devices and related interface systems using a variety of languages (e.g. C#, ASP.NET etc.), ensuring optimal performance, reliability, and power efficiency.
• Lead software risk management and DFMEA, software verification and validation activities from early concept phase through release to manufacturing according to IEC 62304.
• Responsible for software integration and implementation for embedded systems, ensuring products are according to design requirement.
• Write and execute complete testing plans, protocols, and documentation.
• Identify, debug, and create solutions for issues with code and integration into application architecture.
• Incorporate real-time data acquisition from sensors and closed loop control algorithms and verify real-time closed loop control of systems parameters.
• Support development of intellectual property portfolio in device design and process technology know-how.
• To interact closely with engineers from other disciplines to achieve an optimized design within the stipulated project schedule.
• Write and review documentations for QMS.
• To support other activities for product engineering when required.

Requirements

• Degree in Information Technology, Computer Science, Electronics or a related discipline.
• Minimum 10 years of experience in developing embedded firmware with hardware integration experience related to MedTech applications.
• Complete product lifecycle experience including early concept work, and successful transfer of designs into manufacturing.
• Experience with electrical components such as ADC, DAC, stepper and dc motors, image sensors, Ethernet, I2C, SPI, USB and CAN.
• Good experience with ARM processors or other microprocessor architectures.
• Knowledge of computer architecture and operating systems.
• Familiarity with variety of Operating systems including Windows, MacOS X and Linux; and Mobile platforms, including iOS and Android.
• Familiarity with Network technologies, including TCP/IP, Bluetooth, Zigbee, WiFi and Modbus.
• Familiarity with Languages such as C/C++, C#, Python, MATLAB, and Java.
• Experience managing QMS and proficient with GMP guidelines.
• Good collaboration skills, organised and detailed.
• Demonstrate strong interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

This job focuses on software development for Software as a Medical Devices. Junior Project Manager will be working closely with Project Managers and project teams to ensure the software as a medical device product management Lifecyle is followed thoroughly.

• Support project manager in Plan and execute Software as a Medical Device (SaMD) projects including AI applied to healthcare.
• Support technical team in product development, design verification and validation of medical devices including software as medical device.
• Prepare design and development documentation by working together with software developers, quality and regulatory personal.
• Prepare project agreements, procurement specifications and Technical documents.
• Follow-up on project milestones.

REQUIREMENT

• Preferred to have one year of experience in software development or medical device product development.
• Educational background of computer engineering or bio medical engineering
• Knowledge in software development, experience in software development environment will be an added advantage
• Knowledge / willingness to learn the ISO 13485 documentation practices and drive project teams for adherence
• Ability to follow up on commitments

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

This job focuses on software development for Software as a Medical Devices. Junior Project Manager will be working closely with Project Managers and project teams to ensure the software as a medical device product management Lifecyle is followed thoroughly.

• Support project manager in Plan and execute Software as a Medical Device (SaMD) projects including AI applied to healthcare.
• Support technical team in product development, design verification and validation of medical devices including software as medical device.
• Prepare design and development documentation by working together with software developers, quality and regulatory personal.
• Prepare project agreements, procurement specifications and Technical documents.
• Follow-up on project milestones.

REQUIREMENT

• Preferred to have one year of experience in software development or medical device product development.
• Educational background of computer engineering or bio medical engineering
• Knowledge in software development, experience in software development environment will be an added advantage
• Knowledge / willingness to learn the ISO 13485 documentation practices and drive project teams for adherence
• Ability to follow up on commitments

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As part of IME’s Photonics & Sensors Department, the candidate will take the lead for the development of advanced photonics integration. This could include but not limited as photonic heterogeneous integration by bring various best-in-class materials into silicon wafer, electro-photonics integration, etc. You will work closely with an excellent multidisciplinary team involving photonics, semiconductor process, and fab operation.

Responsibilities:

• Development of various photonics integration capabilities with 8-inch and 12-inch facilities, with emphasis on photonics heterogenous integration.
• Design and fabricate various advanced photonics components and integrated circuits aiming for next-generation photonic applications.
• Design of Experiments (DOE) for both design and process margin checking and control.
• Process metrology data taking, device / circuit performance data taking.
• Data analysis and documentation
• Preparation of technical presentations and papers for internal meetings, as well as conferences and journals.
• Collaborate with project team to ensure quality and on-time delivery for various projects.
• Performs other duties as assigned.

Qualifications:

• PhD in Integrated Photonics, Opto-electronics, Materials Science, Physics or equivalent
• Strong hands-on experience in photonics integration.
• Experience in one or more topics listed below is strongly preferred: confocal microscopy, Raman spectroscopy, semiconductor carrier lifetime measurement, optical nonlinear device characterization, ultrafast optics, or other relevant fields.
• Hands-on experience in photonic simulation using various electrical / photonics design software.
• Strong communication, industry awareness, and problem-solving skills.
• Strong self-motivation and interest in the next-generation photonics technology development.
• Industry experience is a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

ROLE:

IME A*Star is currently working on establishing a hybrid fabrication platform for 150mm & 200mm Silicon Carbide (SiC) power MOSFETs as part of the new SiC R&D program. The main objective of this program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration for various types of power MOSFETs and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, with a specific focus on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this deputy lead for wide-bandgap device integration role include the development and integration of several modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, ohmic contact formation etc are essential. We are actively looking for individual with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, device layout design, design verification, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• To lead development of SiC power technologies, serving as both front and back-end process integration in collaboration with advanced module development team. And aim
to grow this team to ~10 headcounts in the next 3 years.

• Optimize and customize process flows for individual SiC products

• Identify and resolve process integration issues and related problems

• Develop specific or derivative processes to meet customer needs

• Support new designs by conducting module characterization and developing effective design rules

• Define and implement measures to enhance stability, yield, reliability, and reduce development costs & time

• Plan and implement sustainable corrective actions to address process deviations

• Continuously monitor and utilize expertise in process and equipment capabilities to achieve optimal device performance

• Determine the correct and effective way to deliver processes, functional devices, and other items to multiple customers

• Perform project management tasks and conduct data analysis

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device Physics

• Highly proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and MOSFET device physics

• Proficient in teaching and knowledge transfer to junior staff members

• Strong communication skills to effectively convey information about process module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data; combined with strong presentation abilities.

ROLE:

A*Star-IME is currently working on establishing a hybrid fabrication platform for 150mm and 200mm Silicon Carbide (SiC) power MOSFETs as a new pillar on Singapore"s Future of Microlectronics in wide-bandgap. The main objective of this SiC RnD program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, specifically focusing on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this role to be successful include the development and integration of several process modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, and ohmic contact formation. We are actively looking for individuals with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• Lead develop process technology for SiC power MOSFETs and ensure it meets the requirements for prototyping manufacturing

• Collaborate with advanced process module development team to establish a process flow for fabricating specific MOS devices

• Responsible to develop and improve test structures that enable fast and rigorous characterization of process

• Accountable to improve device performance and yield through the design, execution, and analysis of experiments for each specific device and product

• Work with cross-functional teams to minimize defects and address technical and yield concerns

• Drive CIP (Continuous improvement plans) to deliver integrated process modules and specific device per project goals

• Make decisions regarding the delivery of process, active and passive devices to multiple customers

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device physics

• Proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and the physics of MOSFET devices

• Strong communication skills to effectively communicate information about module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data, coupled with strong presentation abilities

Scientist/Senior scientist will be part of heterogeneous integration group focused on development of the quantum packaging technology platforms to integrate qubit and control chip on superconductivity interposer.

He/she will work with cross functional team to:

• Design and simulation of superconducting circuits for salable quantum processor in 3D flip-chip architecture.
• Explore and develop superconducting nanowire base photo detector.
• Design and layout of circuits components of a superconducting qubit.
• Develop design rules and PDK for quantum packaging technologies.
• Provide quantum packaging solutions to meet the system requirements based on the simulation results.
  Prepare competitive grant research proposals and lead execution of these proposals.
  Engage industry partners to align and develop the building blocks required for next generations quantum packaging platforms.

Job Requirements:

• Master/PhD in quantum computing; Electrical and Computer Engineering; Material science area
• 4 to 5 years’ experience in superconducting circuits design and simulation for scalable quantum processor. Deep understanding on 3D quantum package
• Working experience on measuring loss and dielectric constants of materials at cryogenic temperatures
• Strong communication, industry awareness, and problem-solving skills.
• Highly motivated to succeed, a self-starter who is driven and able to work with others effectively to get things done.

We are seeking a highly skilled High-Speed IO Modeling designer to join our team. The ideal candidate will have a strong background in Electrical or Computer Engineering (Masters/PhD) , with a focus on high speed circuit modeling, statistical analysis, jitter analysis, digital signal processing, and signal integrity. The successful candidate will play a crucial role in developing IO performance models for chiplet-based high-speed communication protocols and generating complete high-speed link performance matrices based on advanced packaging.

Key Responsibilities:

• Develop IO performance models (Tx, Rx) for chiplet-based high-speed communication protocols such as UCIe, AIB, and others.
• Create complete high-speed link models by integrating IO performance models with advanced packaging interconnects.
• Generate comprehensive high-speed link performance matrices, considering various parameters such as technology node, area, latency, power, number of channels, micro bump pitch, and frequency of data rates.
• Collaborate with cross-functional teams to ensure the successful integration of IO performance models into the overall system design.
• Develop parameterised PDN model and fluent in analysing SI and PI simulations
• Stay up-to-date with the latest advancements in high-speed IO modelling techniques and technologies, and apply this knowledge to improve existing models and develop new ones.

Required Qualifications:

• Master's degree in Electrical or Computer Engineering with 2+ years of relevant experience, or a PhD in Electrical or Computer Engineering with 1+ years of relevant experience.
• Strong understanding of package/interconnect/I-O modelling, statistical analysis, jitter analysis, digital signal processing, and signal integrity.
• Experience in mixed-signal circuit design for High-Speed IOs (e.g AIB, AXI, UCIe).
• Proficiency in IBIS-AMI specification and model creation using Keysight ADS.
• Programming and scripting skills in one or more of the following: Python, Perl, C/C++, TCL, or AEL.

Preferred Qualifications:

• Ability to develop and implementing high-speed IO performance models using industry-standard tools/methodologies.
• Experience with advanced packaging technologies and their impact on high-speed link performance.
• Strong problem-solving skills and the ability to think creatively to overcome technical challenges.
• Excellent communication and collaboration skills, with the ability to work effectively in a team environment.

Job Description

• Working closely with Finance and assist in billing of customers.
• Follow up with customers on overdue invoices.
• Communicate with customers/vendors via phone, email or personally and investigate and resolve customer queries.
• Performance of Good Receipt.
• Maintain and update booking system details when needed.
• Collation of information for Management.
• Assist with Management / Financial reporting.
• Preparation of presentation slides.
• Carry out other duties and tasks that may be assigned from time to time.

Job Requirements:

• Diploma in any discipline (preferably in Business, or accountancy related).
• Proficient in Microsoft Office (e.g. Outlook, Word, Excel, Powerpoint)
• Excellent interpersonal and communication skills, meticulous.
• Good spoken & written communication skills.
• Able to work independently and multitask.
• Knowledge of SAP system will be advantageous

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

• Be a member of the leadership team to achieve the vision and mission of the National GaN Technology Centre (NGTC).
• Lead the Technology, Engineering and Industry team in technology road mapping and R&D pathfinding in device architecture, fabrication process technology, and MMIC design.
• Lead the Technology team, which comprises (a) characterization & modelling, (b) MMIC design, testing & model validation, (c) device failure and reliability analysis, (d) ultra high frequency GaN-on-SiC device design, layout, fabrication and characterization, and (e) low voltage GaN-on-Silicon device design, layout, fabrication and characterization.
• Coordinate with the Engineering team to develop ultra high frequency devices, ultra low voltage devices, and their MMICs.
• Coordinate with the Engineering and Operations teams to ensure timely delivery of the projects.
• Initiate and secure research grants and industry funding.
• Initiate, coordinate and manage research collaborations with IHLs and industry partners.
• Provide regular progress report of the Technology team’s activities to NGTC management.
• Represent NGTC in customer meetings.

Requirements:

• PhD in Electrical & Electronic Engineering, Materials Science and Engineering, Microelectronics Engineering, or closely related fields are welcome to apply.
• Deep understanding of GaN-HEMT device physics and GaN-based MMICs.
• At least 12 years of post-PhD hands-on experience in GaN HEMT and MMIC technology development including design, characterization (e.g. DC, small-signal and load-pull measurement), and modelling; preferably in RF GaN-on-Silicon or GaN-on-SiC technologies.
• At least 12 years of experience in leading a team of research engineers/scientists in managing multiple projects.
• Candidates with industry experience in GaN related R&D would be preferred.
• Working knowledge and hands-on experience in Design of Experiments (DOE) methodologies, statistical root cause analysis, problem-solving methods, and in-line metrology techniques is desired.
• Possess strong leadership, project management, interpersonal and oral/written communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

ROLE:
A*STAR-IME is leading the way in establishing industry first 200mm open Silicon Carbide (SiC) R&D program. The program specific focus is on advancing 200mm SiC technologies in key areas such as epitaxy, gate stack, ion implantation, and dry etching, and integrating these modules to fabricate high-performance power devices. Our objective is to drive innovation in power device research, particularly in power MOSFETs rated above 1.2KV. Developing key innovative process is crucial for creating high-performance devices that will contribute to advancements in automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. This role involve growing leadership into ion implantation processes for p-body, channel, guard ring, source contact, and other components. We are currently seeking such individual with ~5 years of experience in ion implantation. The chosen candidate will be responsible for independently supervising ion implantation processes, conducting ion implant simulations, possessing knowledge of crystallography and ion interaction with atoms, having strong understanding of implanters and related thermal processing physics, beam optics, dosimetry systems, and vacuum technology. The ideal candidate should also be willing to collaborate with various departments, the technology development group, and customers. Furthermore, the candidate will contribute to the wide-bandgap team by sharing the ion implantation expertise on compound semiconductor materials and collaborate with other departments working with Si-based technology. The candidate will also be groomed to lead this diffusion process module group of ~6 headcounts into the future.

RESPONSIBILITIES:

• Diagnose malfunctions and using test equipment & software to test faulty tool; applying knowledge of the functional operation of the ion implant equipment

• Support on-site ion implanters in creating, running & characterizing recipes for recipe validation and develop process to achieve the desired dopant profile with excellent
damage recovery.

• Collaborate with vendors to optimize equipment performance and reduce tool downtime

• Analyze data related to implant-related defects formation with quantification and defects minimizations strategy

• Examine work-orders and communicates with equipment operators to resolve equipment problems & determine mechanical and human errors contributed to the issues

• Perform scheduled preventive maintenance tasks with tool operators, especially in checking, cleaning, repairing, detecting and preventing problems

• Responsible for designing experiments for ion implantation at various dose, energy, tilt, and twist levels

REQUIREMENTS:

• Ms/PhD Degree in Electrical Engineering or related field

• >3-5 years industrial experience for high power device design and modeling

• Extensive proficiency in medium to high energy/current ion implantation processes, including a comprehensive knowledge of implant equipment, equipment parts, and
troubleshooting techniques to minimize equipment downtime

• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species

• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile

• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors

• Familiarity with essential device properties resulting from ion implantation

• Adept at mentoring and transferring knowledge to junior staff members

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Civil & Environmental Engineering (CEE) of the National University of Singapore is hiring one Research Fellow to assist the Principal Investigator in the Research Area of Concrete 3D printing with a focus on the durability, rheology, and sustainability.

The RF is required to work on;

1. Development of durable construction materials from locally available resources for 3D printing,
2. Assessment of environmental impact of the developed concrete mixture and
3. Evaluation of the service life of the developed 3D concrete mixture.

Applications should include (i) a motivation letter, (ii) a detailed Curriculum Vitae including list of publications, and (iii) contact of 3 referees. Only shortlisted applicants will be contacted.

Job Requirements

• Possess a PhD degree in Civil Engineering or Materials Engineering with demonstrated experience in designing and conducting experiments, statistical data analysis and possess excellent quantitative, and analytical skills.
• The ideal candidate is expected to be self-motivated and can work in an interdisciplinary environment. It is important that the candidate has an ability to work with minimal supervision, plan and perform experimental and field work, and present results in group meetings.
• He/she will work in an international environment and, therefore, excellent oral and written communication skills are required.
• Prior experience in 3D concrete printing, durability test, low-carbon concrete are essential to the posted job.
• Open to fixed-term contract.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Electrical and Computer Engineering (ECE) at the National University of Singapore (NUS) is seeking a candidate at the appointment grade of Research Assistant Professor in the area of semiconductor technologies.

The candidate is expected lead active and externally funded research program and collaborative research with colleagues in other disciplines to address challenges that achieve scientific and societal impact are encouraged. Besides research, the candidate is also encouraged to contribute to teaching and service roles at the Department, College, or University level.

Interested applicants are invited to submit a detailed CV, list of publications, statement of research interests and plans, contact details of at least 3 referees, and the NUS Personal Data Consent for Job Applicants.

Shortlisted candidates will be invited for a campus visit and interview. Applications will be accepted until the available position is filled.

Qualifications

The successful candidate must have an earned doctorate in Electrical Engineering, Computer Engineering or Computer Science for at least five years including two years of PhD study.

Candidates must have an established track record in research fields of semiconductor technologies.

Job Description

• Arrange bookings with shipping lines or carriers for cargo to be transported via sea. Coordinate closely with suppliers, customers, and various internal departments and warehouse team to ensure smooth cargo flow and timely shipments.

• Prepare and manage all relevant documentation for sea freight shipments, including shipping instructions, customs documents, letter of credit and any other necessary paperwork.

• Arrange timely collections / Dispatch according to customer’s request.

• Monitor the progress of sea freight shipments in real-time, providing regular updates to stakeholders. Address any delays or issues promptly and take corrective actions and pre-alerts to customers.

• Ensure timely billing and accuracy of the invoices.

• Attend and responds on customer’s inquiry.

• Maintain open and effective communication with customers regarding shipment status, delays, and any relevant updates. Provide excellent customer service by addressing inquiries and concerns promptly.

Job Requirements:

• Candidate must possess at least O" Level

• Minimum 1 year of experience in shipping industry.

• Knowledge of L/C Documentations, incoterms, Singapore shipping procedure & freight forwarding experience

• Responsible and committed team player

• Motivated individual and possesses good planning and follow-up skills

• Able to handle high volume of workload in a fast-paced environment

• Immediate Starter will be an added advantage.

• Working location: Clementi

• People with disabilities are welcome to apply.

About us

Help us make a difference!

At Sunbird Bio, we’re developing protein-based diagnostic tests that provide unprecedented insights to enable earlier, more accurate diagnosis and treatment of Alzheimer’s disease and other neurological disorders. We are addressing the tremendous, growing need for more reliable and sensitive diagnostic tests to accelerate drug development and enhance patient care. We will be able to give patients and clinicians the clarity they need to make confident decisions when they matter most. Join our team to find a purpose-driven career and environment that supports you while you’re working to help others.

Job Specification

The Research Scientist will lead a team of researchers to design, develop and validate immuno-assays on a novel diagnostic platform. The successful candidate will be responsible for ensuring project goals are met in a timely manner and to communicate the results to relevant stakeholders.

· Work with the team to scope and manage project within requirements and ensure timely execution.

· Design and execute experiments for development and optimization of immuno-diagnostic assays according to required specifications.

· Constantly survey literature for new ideas that for the optimization of immunoassays

· Able to analyse, summarize and communicate results to relevant stakeholders.

· Provide scientific input in both R&D meetings and multifunctional meetings.

· Mentor junior team members in experimental design and troubleshooting.

Requirements (Qualification, Years of Experience, Knowledge & Skills required)

· PhD qualification in Biology, Chemistry, Biochemistry or related disciplines.

· Extensive experience in developing assays on different immunoassay platforms (ELISA, Quanterix, MSD, Elecsys) is highly preferred.

· Prior experience in protein synthesis and characterization with tools such as SPR (Biacore, Horiba, Octet etc.) to study protein-protein interactions and binding kinetics preferred

· Familiarity with general molecular biology and biochemical techniques such as protein conjugation

· Experience in bioassays and working with human samples is a plus

· Prior industry assay development experience is a plus.

· Knowledge of regulatory or quality assurance processes is an advantage.

· Able to work in a fast-paced environment with tight deadlines.

· Flexibility to lead or be part of the team.

· Able to work independently and in a collaborative manner with an interdisciplinary team.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Applicants are invited for the position of Associate Scientist to participate in CFD studies for Aerodynamics.

The applicant must have a comprehensive knowledge in CFD and extensive experience in code development. Prior experiences in OpenFOAM and appreciation of commercially- available CFD software will be required.

Requirements

The applicant should possess a Bachelors or Masters in the area of Mechanical or Aeronautical Engineering, with a good background in Fluid Dynamics/Aerospace Propulsion

Summary:
As the Cargo Flow Officer, you will manage the north bound transhippment connection and your assigned south bound service to work towards achieving the objective of ensuring optimization of full containers and maximizing the ships with empty evacuation.

To perform well in this role, you should be someone who works well under pressure to meet multiple timelines, as well as have a logical mind to solve problem and make decision amidst ad-hoc incidents.

Main Responsibilities:

Cargo Flow for South-Bound Service (65%)

• Perform vessel planning for ANL South-Bound Vessel
• Prepare Daily Booking Report
• Liaise and challenge origins to ensure forecast are provided as accurate as possible
• Raise any abnormality between forecast and fresh bookings to trade managers immediately
• Identify and challenge potential issue when forecast versus fresh bookings variance is more than 120% or whatever the percentage threshold is customized for the trade
• Cargo planning when ANL vessels approach transshipment hub or direct port calls
• Evaluate and analyze the ports and vessels operations performance
• Liaise with transshipment team to plan for final load list for approaching vessel
• Minimize Operational Cost (change of vessel, shut out and storage cost) through vessel planning
• Finalize vessel within 24hr KPI after she leaves the direct or Transshipment port

North-bound connection support (35%)

• Generate reports to be used as basis for container transhipment planning, identifying long idling at terminal and investigate reasons for delay and to check if evacuation plan is in place as well as planning the connection of incoming transshipment containers
• Ensure to plan containers connectivity to final destination
• Based on first carrier arrival – identify feasible and earliest vessel connection to respective final destination
• Prioritize connection planning on in-house vessel. Otherwise – source for other alternative vessels from 3rd party if no vessel or space option from in house vessel
• Send instruction to transshipment team to nominate the containers on target vessel and to update journey leg (JL) accordingly
• Random check if containers are nominated in terminal and JL was properly updated
• Monitor vessels connectivity and make changes if any misconnection

Minimum Requirements:

• Minimum a Diploma Holder from recognized institutions, preferably in shipping or logistics with at least 1 year of working experience in transportation or logistics industry would be preferred
• Good knowledge of the maritime industry
• Proficient in MS Excel (Vlookup / Pivot Table) would be highly preferred
• Good communication and analytical skills

**This role is open for local employment only

**Kindly note that only short-listed applicants will be contacted.
** By applying for this role, you hereby consent to the CMA CGM Group collecting, processing and using any personal information you submit, for the following purposes:
(i) To process the application for the role being applied for;
(ii) To process the application for other open positions within the CMA CGM Group which may be suitable to you;
(iii) To conduct necessary reference checks; and
(iv) Any other purpose related to one or more of the above.

You further consent to the CMA CGM Group retaining such personal information for a period of two years following your submission thereof, so that we may consider you for other open positions within the CMA CGM Group which may be suitable to you in the event that you are not selected for this role.

NOTICE TO THIRD PARTY AGENCIES: Please note that CMA CGM Group does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, CMA CGM Group will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, CMA CGM Group explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of CMA CGM Group.

Job Description

1. Day to day area maintenance of office premise and building.

2. Assist in distribution of texbooks and materials in classrooms.

3. Related general works as designated by supervisor.

Job Requirements

1. Able to converse in simple english and chinese to english/chinese speaking clients.

2. Physically fit (able to move across different floors and carry textbooks).

3. 5 or 6 days workweek (off 1 or 2 weekend day).

4. Salary will commensurate with working week & schedule

5. Overtime payable.

6. Mature Workers welcomed to apply.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• The Research Fellow will work closely with the Principal Investigator, Dr. Zhang Yamin, on the research project of design biodegradable batteries for healthcare and sustainable applications.
• The Research Fellow will help develop new electrode materials, biodegradable batteries, self-powered electronic platforms, and investigate the medical and environmental applications.

Job Requirements

For Research Fellow Position:

• A PhD degree in a relevant area, e.g., Chemical Engineering, Material Science and Engineering, Chemistry, Electrical Engineering;
• Good publication record;
• Experienced material synthesis and characterization, electrochemistry
• This position is available from January 2025

Responsibilities

• Developing and implementing the policies and procedures that relates to Business, Risk management, AML, and regulatory Compliance
• Develop effective compliance strategy and implement compliance framework tailored to global and local regulatory considerationsOverall management and oversight of the compliance and Risk program
• Keep abreast of regulatory developments and best in market compliance practices
• Collaborate with company leadership to integrate compliance considerations into product development and business processes
• Serve as Compliance/AML Officer with or primary point of contact for MAS
• Manage compliance relationships with banking partners
• Provide guidance and advise the management and key stakeholders on individual vendor compliance risk assessments, as required.
• Responsible for Compliance management and monitoring of business compliance related matters.
• Support the organization's compliance training programs by developing training materials and conducting training sessions for employees.
• Collaborate with cross-functional teams to promote a culture of compliance and provide guidance on compliance-related matters. Reporting to group stakeholders and expert functions on Due Diligence findings and compliance related matters.
• Strong ability to communicate and interact effectively across organizational and cultural boundaries, internally and externally.
• Experienced in team management and good interpersonal skills.
• Comfortable working in a APAC and fast-paced environment .

Requirements

• Bachelor’s degree in law, finance, business administration or related field5+ years leading a regional or global compliance function
• Extensive experience managing relationships with regulators, including central banks, financial regulators and law enforcement agencies.
• Deep understanding of financial regulations and compliance requirements specific to fintech, including AML/KYC, sanctions, anti-bribery and corruption
• Outstanding communication and interpersonal skills, with the ability to interacteffectively with regulators, senior management and cross-functional teams
• Excellent problem-solving abilities
• Highly organized with attention to detail
• Working knowledge of key regulations such as Payments Services Act will be advantageous
• Excellent written and verbal communication skills

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

About the Centre for Quantum Technologies (CQT)

The Centre for Quantum Technologies (CQT) in Singapore brings together physicists, computer scientists and engineers to do basic research on quantum physics and to build devices based on quantum phenomena. Experts in this new discipline of quantum technologies are applying their discoveries in computing, communications, and sensing.
CQT is hosted by the National University of Singapore. The Centre also has staff at the Agency for Science, Technology and Research, Nanyang Technological University, Singapore, and the Singapore University of Technology and Design. With some 200 staff and students, it offers a friendly and international work environment.

Learn more about CQT at www.quantumlah.org

Job Description

The candidate will work on mathematical foundations of quantum information measures, e.g., exploring integral formulae for relative entropies and on axiomatic derivations of quantum information measures. In this role he will also help supervise students and junior postdocs working on these topics.

Job Requirements

• Broad experience in quantum information, in particular in the mathematical foundations of quantum information and in the study of information measures
• Strong background in mathematics, in particular matrix analysis
• Experience in supervising students and junior postdocs

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The selected Research Fellow is required to independently and collaboratively conduct research under the guidance of PI. He/she will design and perform the experiments as well as mentor graduate and undergraduate students.

Qualifications

• Possess a PhD degree in related fields such as Electrical Engineering, Biomedical Engineering, Mechanical Engineering, Material Science, Neuroscience, and Translational medicine.
• Preferably with expertise in interface development, micro/nano fabrication, electrochemical sensing, and artificial intelligence.
• Strong written and spoken communications and able to present results clearly.
• Open to fixed-term contract.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Augmented Human Lab, at the Smart Systems Institute, National University of Singapore is seeking a motivated postdoctoral researcher with expertise in Machine Learning, AI, and multi-modal interaction for developing emotion recognition systems.

NUS is a world-class university that provides an outstanding and supportive research environment. Its School of Computing is highly ranked within the top 10 in the world. The Augmented Human Lab is an excellent environment with a diverse team (www.ahlab.org/people) which will accelerate your research career.

The initial term of appointment will be 1-year. The selected candidate will be offered competitive salaries and benefits.

The Research Fellow will be responsible for working closely with the Principal Investigator (A/Prof Suranga Nanayakkara). He/She will work on creating an AI system that can identify emotional states and make recommendations (e.g. drinks).

Major responsibilities include:

1. Conduct original, impactful research leading the industry funded ‘EmoDrink’ project
2. Provide guidance to PhD students, Research Engineers in the group.
3. Dissemination of the research outcomes via Journal/Conference papers and contribute to research grant proposals.
4. Participation in industry project meetings as well as industrial/academic events.

Qualifications

• PhD in Computer Science (or equivalent)
• Experience and interest in ML/AI techniques
• Good track record of research with a good publication record
• Excellent communication skills (written and verbal) and interpersonal skills