Job Description:

• Design FA project inclusive of tooling, artwork, material and process.
• Draft drawing for making of tooling and artwork.
• Liaise with suppliers regarding the making of tooling and artwork.
• Create job ticket which consists of material and process.
• Co-ordinate FA run with FA report submission
• Co-ordinate product transfer from US to Singapore facility.
• Develop and fabricate test jig/tool for testing of functionality of finish product.
• Maintain all test jig/ tool used in production.
• Perform product failure analysis, as well as reduce cost through yield improvement, cycle time reduction and process enhancement.
• Coordinate the Engineering Change Notice (ECN) process.
• Putting up sales quotation for the customer through the sales department.
• Any other task assigned

Requirements:

• Diploma in Electrical / Electronics / Mechanical or Microelectronics Engineering.
• Knowledge of 3D modeling software such as Pro/Engineer and AutoCAD.
• Need to be flexible on working hours as support over the weekends may be required.
• Must be a self-motivated team player with good presentation and communication skills
• Good project and time management capabilities

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

Job Description

· Responsible for ensuring that assigned projects meet customer’s specs, strictly follow procedures and schedules

· Communicate and coordinate effectively with all relevant internal & external team members including contractors to ensure efficient completion of projects

· Review work procedures and highlight activities which may cause interruptions on the projects

· Closely supervise all contractors to execute tools services hook-up activities, ensure safety regulations practiced and monitor work quality performance

· Maintaining and modifying equipment to ensure that it is safe, reliable and efficient

· Liaise with clients on services requirement, schedule, reports and progress claims

· All other ad-hoc assignments assigned by Project Manager

Qualification

· Degree /Diploma in Mechanical Engineering

· At least 2 years of working experience

· Proficiency in Microsoft Project and Microsoft office and AutoCAD

· Highly analytical, meticulous, proactive and self-driven

· Strong team-player with excellent interpersonal and communication skills

· Able to work under pressure and in fast-paced environment

· Able to work collaboratively with others

· Able to start immediately

· Able to read and interpret P&ID.

Job Descriptions:

• Collaborates with the commercial/business development team to develop innovative and competitive technical solutions for bidding projects.
• Prepares detailed technical method statements, drawings, and integrated service and equipment solutions to meet project requirements.
• Reviews and understands bidding employer’s requirement documents, project specifications, and process data.
• Translates employer requirements into effective contractor solutions that align with project goals.
• Monitors market trends to ensure tender documents remain competitive and relevant, making necessary adjustments.
• Implements improvements in the tender process to enhance the company’s market position and competitiveness.
• Works closely with various department stakeholders to gather necessary information for bidding proposals.
• Consolidates and integrates collected information into comprehensive bid proposals.
• Conducts internal reporting of tender solutions to secure management approval for bid submissions.
• Provides timely and accurate updates on bid progress to the tender manager.
• Supports the tender manager in developing commercial bid solutions and engaging with the market as required.
• Support engineering budget (estimation) and cost control.
• Participates in market visits to assess and incorporate subcontractor solutions into the company’s proposals.
• Evaluates subcontractor technical solutions to ensure alignment with project requirements and company standards.
• Integrates subcontractor solutions into the company’s bid proposals effectively.

Requirements:

• Minimum Diploma or Bachelor’s degree in engineering, or a related field.
• Prior experience and knowledge in offshore wind projects is highly desirable and will be given preference.
• Proven experience in technical solution development, preferably within a commercial/business development context.
• Strong understanding of bidding processes, tender documentation, and market trends.
• Excellent analytical skills and attention to detail.
• Effective communication and collaboration skills to work with cross-functional teams.
• Ability to manage multiple projects and meet tight deadlines

Job Description

• Monitor, track, and provide timely project progress reports to the management
• Report to Project Manager / Site Manager for the arrangement of work
• Prepare the specification and data sheet as per codes / standards, project, and client’s requirement,
• Responsible of the submission and approval of materials in compliance to the specification;
• Responsible monitoring of work progress on site
• Co-ordinate the inspection work on site and installation works
• Handling technical and engineering problems on site
• Ensure site safety and proper execution of site work procedure on site
• Monitor and co-ordinate the works of subcontractors

Requirements

• Degree or Diploma in Mechanical Engineering / Building / Project Management or equivalent.
• Min. 2 years relevant working experience in the construction industry (building facade).
• Strong leadership, organizational, planning, and interpersonal skills.
• Good working attitude with a high level of professionalism, integrity, initiative, and being a team player.
• Knowledge and/or experience in contractual management is an added advantage.

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Responsibilities:

• Perform servicing of Trane chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on Trane chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning
• Positive attitude

Job Description

1. Help implement "Green" initiatives to align with Company's sustainability and eco-friendly strategies.
2. Ensure compliance with mandatoy regulations regarding water polution, recycling and waste disposal.
3. Collect and analyse environmental data.
4. Be familiar with business requirements that requires, compliance with Enviromental Product Declaration,
ISO 14025 and Environmental, Social and Governance factors.
5. Help determine ways to prevent, control and correct environmental health hazards.
6. Maintain records and help manage Company's consumption of electrical and water resources.
7. Familiarity with company's effort in keeping pace in complying with Façade productss specifications
concerning Design for disassembly, use of recycled materials, circular economy, materials with low carbon
emission with sustainable characteristics.
8. Create reports about company's environmental impact.

Position Requirements

Bachelors Degree In Environmental Engineering

Tasks

Designing systems and processes to minimize pollution and waste

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

About the role

This position involves applying knowledge in engineering and science to design & develop scale up processes in the laboratory and future production of our aerogel line of products. Successful candidate will be given a fulfilling role to work in the company’s state of the art platform technology, ASPIRe. As a valuable member of the team, you will be involved in every aspect of the development from infancy to the implementation

Process Engineer

Locations: 8 Cleantech Loop, #08-37 Singapore 637145 .CleanTech 3

Working Days: 5 days a week

Time: 9 - 6 pm

Basic Salary ranges from $4500 to $5500 (Depending on qualifications and experience).

Other benefits include transport allowance and basic medical coverage, annual leave, paternity/maternity and compassionate leave.

Roles & Responsibilities

• Assist Production Manager in the daily running of production department.
• Design and develop the pilot process plant for upscale production.
• Develop product testing protocols and procedures based on product specifications to test and determine the full operating profiles.
• Lead in troubleshooting of process equipment and machinery when required
• Assess processing suitability according to varying criteria including performance, ease of manufacturing, reproducibility, and scalability
• Consolidate operating parameters and other observations in a clear and structured format/template
• Develop framework and manage safety records such as SOP, SWP, GMP and RAM.
• Work closely with the formulations and product development team to achieve optimization in processes in terms of efficiency and cost.
• Carry out quality control for in-house development and customer samples
• Work closely with business team and customers/industry partner for pilot trials, implement their feedback and improve existing product to achieve customer specification.
• Development of a suitable manufacturing process for the product formulation.
• Production of sample batch in lab scale and pilot scale.
• Responsible for effective technology transfer and upscaling to commercial scale batches
• Work closely with other departments to validate manufacturing methods for production scale batches.
• Train production personnel on manufacturing processes.
• Trouble-shooting in the process matrix for routine production.
• Maintain and document quality records with regards to processing units and machinery.
• To establish and maintain Good Manufacturing Practices for all commercial projects.
• Mentor and manage junior staff.
• Prepare progress update and presentations
• To ensure all GMP quality related records are kept properly

Requirements

• Have a Bachelors / Masters in chemical engineering, mechanical engineering, industrial engineering or a related field
• Have knowledge on process design software such as CHEMCAD, CHEMPRO, AspenPlus and/or other related software.
• Have a good knowledge of industrial processes and best practices in chemical plants.
• Have a good knowledge in HVAC systems
• Self-directed learner, ambitious with desire to succeed and positive attitude towards learning
• Experience in coatings/paint would be advantageous.
• Good knowledge of chemical handling.
• Project Management expertise

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘process engineer’ in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, residential status in Singapore, details of your educational background and work experience.

Job Description

• Online and Offline Partial Discharge Measurements for HV electrical assets such as cables , transformers, switchgears , motors and generators
• Offline Cable testings (Hi-pot test, Megger test, Tangent Delta test) above 6.6kV rated Cables
• Infra-Red Thermography for HV and LV Switchboards
• Lightning protection and earthing system measurement.
• Assist to servicing maintenance work by project teams.
• Handling of multiple test equipment from Omicron, Doble Engineering,Qualitrol, IRIS Power, EA Technology, HVPD, PDS, B2 and IPEC

Requirement

· Bachelor Degree in Electrical Engineering (Preferably SIT, NTU)

· Training will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

13th Month & Variable Bonus

Responsibilities:

• Attends / conducts daily tool box briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Oversees day-to-day project supervision for new construction platform
• Ensures work assigned is carried out effectively and productively in order to meet client specifications and requirements
• Monitors on structure work progress activities.
• Reports on the structure project progressEnsures sub-contractors carry out the work as planned
• Evaluates project to identify issues and opportunities to improve performance
• Identifies and resolve structure interference and propose modification onsite if necessary.
• Monitors drawing and technical information
• Conducts Risk Analysis assessment

Requirements:

• Bachelor's degree, Diploma in Engineering
• 3 – 5 years of relevant working experience in construction of oil & gas offshore platform project
• A team player & be able to work closely with other discipline supervisors.
• Willing to work late hours

Our Address and Working Hours:

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8am - 5:15pm

Fri : 8am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

We seek a highly skilled and experienced Facility Engineer to oversee the maintenance and operations of our facilities. You will play a crucial role in ensuring functionality, safety, and compliance while leading our maintenance team. The ideal candidate will have a strong technical background in mechanical or electrical disciplines and extensive experience in facility management and supervision. Proficiency in English and Mandarin, along with excellent communication and negotiation skills, is essential for liaising with contractors, local authorities, and stakeholders.

RESPONSIBILITIES

· Oversee the maintenance and repair of facility systems, equipment, and infrastructure.

· Supervise contractors, including negotiating pricing, scheduling, and quality control.

· Ensure compliance with local codes, safety regulations, and environmental standards.

· Prepare reports on maintenance activities, budget expenditures, and project progress.

· Serve as the primary contact for local authorities, obtaining permits, and ensuring regulatory compliance.

· Develop and implement emergency response procedures.

· Lead and mentor the facility maintenance staff, providing guidance and training.

JOB REQUIREMENTS/QUALIFICATIONS:

· Diploma in Mechanical or Electrical discipline or certification in facility management.

· Minimum of 5-7 years of experience in facility management, with supervisory roles.

· Proficiency in English and Mandarin, with strong communication skills.

· Ability to write reports, plan schedules, negotiate prices, and supervise contractors.

· Familiarity with local codes, safety regulations, and environmental standards.

· Class 2 or 3 driving licence required for travel to various facilities.

ATTRIBUTES:

· Ability to lead and motivate teams, fostering accountability and teamwork.

· Strong analytical and problem-solving skills.

· Flexibility to adapt to changing priorities and deadlines.

· Meticulous attention to detail for accurate documentation and compliance.

· Excellent organisational skills to manage multiple tasks and projects.

· Clear and effective communication skills for conveying technical information.

Job description

• Support agency in new cloud related projects implementation.

• Assist agency in reviewing access rights, and accounts control in cloud.

• Review and resolve the vulnerabilities reported from scan and/or alerts.

• Provide consultancy to new projects to onboard AWS cloud services.

• Strengthen the security posture of existing cloud infrastructure and propose enhancement.

• Raise service request to BAU Operations Team for in-scope cloud related tasks.

• To support and maintain AWS S3 Buckets and other AWS Storage services such as FSX.

• To support Trend Micro Cloud One Workload and Endpoint Security / AMHIPS as part of Agency Anti-Virus/ Anti-Malware system.

• To support and maintain ABLR Heavy Forwarder as part of Agency Audit Logging requirement.

• To support Agency Infrastructure using DevOps process or tools such as Terraform or AWS CloudFormation.

• To support Audit and security compliance activities.

• Work with BAU team, System Engineers, Cloud Engineers, and DBA to support and maintain agency environment.

• To support and maintain Central Account Management (CAM) servers as part of Agency Audit requirement.

• To support Disaster Recovery exercises.

• Possessing Cloud certifications is preferred.

If no relevant certification, a minimum of 4 years working experience in the IT field and at least 2 years working experience in a cloud environment will be required.

Job Responsibilities:

• To coordinate with customers and sub contractors on maintenance and upgrading works.
• To prepare sales quotations, service orders and breakdown reports.
• To visit customers to gain their feedback.

Job Requirements:

• Diploma in Electrical, Electronics or Mechanical Engineering.
• Preferably 3 years of relevant working experience.
• Work experience in Lift/Escalator/Service/Project/Building industry preferred.
• Good communication skills.
• Only Singaporean need to apply

ROLES AND RESPONSIBILITIES

• Develops project objectives by reviewing project proposals and plans; conferring with management.
• Determines project responsibilities by identifying project phases and elements; assigning personnel to phases and elements; reviewing bids from contractors.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Confirms product performance by designing and conducting tests.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.
• Controls project costs by approving expenditures; administering contractor contracts.
• Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations.
• Maintains project data base by writing computer programs; entering and backing up data.
• Maintains product and company reputation by complying with federal and state regulations.
• Contributes to team effort by accomplishing related results as needed.

REQUIREMENTS

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Environmental/Health/Safety) or any related field
• At least 3 Year(s) of working experience in the related field is required for this position.
• Possess keen knowledge of water and wastewater treatment technologies and the industry in general
• Able to work independently and a multitasker/ able to cope in a fast-paced environment.

Job Description

• Review engineering drawing & specifications, design and execute engineering experiments, calculations and statistical control for new products & processes
• Delivering engineering activities to support and improve the company’s manufacturing & supply chain operations.
• Ensure manufacturing processes are capable of meeting and continue to meet quality, cost, delivery rate and lead time requirements to customers.
• Perform trouble shooting & analysis of production & process issues. Perform process redesign where required.
• Identify opportunities for new or improved processes to meet current or future requirements.
• Perform new equipment & materials validation using standards involving IQ, OQ & PQ methodology.
• Source new suppliers, qualify specifications & perform cost estimation to price out project expenses.

Experience

• General awareness of Manufacturing Systems e.g. CAD, CAM, CAPP, Manufacturing Execution System, ERP & Technical Publications.
• General experience with work flow Simulation software & Robotics applications e.g. Flexsim & UiPath.
• Experience with write-ups on work procedure workflow & instructions for production process.
• Experience with statistical process control & other quality/performance control tools.
• Ability to apply ISO13485, GDPMDS & other ISO standards to existing operations & into new businesses.
• LEAN/Six Sigma practitioner.
• Knowledge of ISO requirements.
• Knowledge on end-to-end processes from technical/material qualification, supplier audit, process qualification to manufacturing & supply chain logistics engineering.
• Resourceful, able to independently conduct research & apply new solution to business requirements.
• Proven Project management skills.
• Good presentation skills.
• Independent, self-motivated, process oriented & analytical.

Job Requirement

1. Minimum Bachelor degree with at least Six (6) years’ relevant field safety experience in supervision of installation and maintenance of roadside and Civil and structural coordination with government/utility agencies and other contractors.

2. Experience as a safety auditor/inspector in ensuring Environmental, Safety and Health practices are complied with.

3. Strong analytical and problem-solving skills, resourceful and meticulous.

4. Highly motivated and pro-active with the ability to work both independently as well as in a team.

5. Proficient in Microsoft Office (Outlook, Word, Excel, and PowerPoint for Windows.

6. Good verbal communication and writing skills in English.

7. Be expected to travel regularly between office and sites.

8. Prepared to work on site and perform night work based on project needs.

Job Description

1. Oversee the works on equipment structures, installations, deployments, facilities, and equipment being deployed at sites.

2. Plan and work out the resource provision requirements, work, schedule, and Standard Operating Procedures (SOP) for works at sites.

3. Review planned work schedule and method statements prior to commencement of site work activities.

4. Ensure that works are carried out accordingly to design, meeting the safety, health, environmental and comfort requirement for stakeholders.

5. Identify defects and damages at the site infrastructures, including equipment and facilities, as well as theft, accidents, and incidents.

6. Carry out safety training to instil safety awareness. Ensure safety rules and regulations at sites are adhered to by all site personnel.

7. Be part of Safety Committee and ensure compliance to safety, health and environmental requirements including Authority Code of Practices (COP) and WSH, MOH & MOM Guidelines.

8. Resolve any unexpected problems or difficulties that may arise at sites.

10. Prepare regular reports to update site progress, resource utilisation, requirements, past and on-going activities, etc.

Please email your resume to [email protected]

Location: Jurong West Area

Responsibilities

• To be the liaison for the coordination of M&E works to ensure works are carried out as per schedule and local authorities’ quality standard.
• To supervise and ensure that work done are in accordance with the required drawings and specifications as per the contract.
• To monitor closely and report promptly work progress to superior.
• Coordinate and prepare technical submissions with sub-contractors and suppliers to ensure timely work arrangements.
• Manage project documentation and maintain accurate records.
• Ensure compliance with all health and safety regulations.

Qualifications

• Diploma in Civil Engineering/Building Construction/Mechanical Engineering or any equivalent qualification or relevant on-the-job experience are welcome.
• More than 3-years of work experience in the Construction sector would be preferred.
• Good team player and able to work independently.
• Interested applicants are required to submit their detailed CV and state their current and expected salary.

Menicon is a contact lens specialist embracing precision craftsmanship to see life in detail. Join our family in Singapore, the first manufacturing facility outside Japan for daily disposable contact lens and a base for developing technologies and products with advanced, value-added features.

Be part of our journey toward digitalization, where you’ll play a key role in advancing automated systems and smart technologies to enhance efficiency. Join a team that leverages innovation to transform manufacturing processes and deliver exceptional quality.

Key Responsibilities:

• Provide control system support, to improve efficiency and reliability of manufacturing equipment and processes.
• Collaborate closely with mechanical, validation, and process engineers to optimize equipment & processes including data analysis for problem resolution.
• Initiate and spearhead software improvement projects on control systems and manage testing, validation and implementation
• Engage in cross-functional team projects aimed at machine and process improvements, embodying teamwork, responsibility, and a capacity for independent work.
• Lead training sessions to enhance the technical skills of operational and technical teams, ensuring smooth transfer and operation of automated equipment.

Minimum Requirements:

• Degree in Engineering or related field.
• 3 years work experience in designing control systems for manufacturing equipment
• Competent in SCADA and PLC programming
• Knowledge in C# will be an added advantage

Beng Hui Marine Electrical Pte Ltd (a subsidiary of BH Global Corporation Ltd) is looking for someone who is motivated and leads by example and is willing to drive sales through proactiveness and hard work. We always believe in rewarding results.

Responsibilities

• Sales Generation: Contribute to the team revenue in all aspects of the sales process, including lead generation, customer inquiries, order processing, and post-sales support.
• Customer Relationship Management: Maintain strong relationships with existing and potential customers by providing prompt and accurate information, addressing queries and concerns, and ensuring customer satisfaction.
• Proposal and Quotation Preparation: Create sales proposals and quotations, ensuring accuracy, and timely delivery to customers.
• Market Research: Conduct research on market trends, competitors, and customer needs to identify potential sales opportunities and develop effective sales strategies.
• Trade Shows and Events: Assist in the planning, coordination, and execution of trade shows, industry events, and customer demonstrations to promote products and services.
• Administrative Tasks: Perform various administrative tasks, including maintaining sales records, preparing sales documentation, managing calendars, and coordinating meetings and appointments.

Requirements

• Diploma or Certifications in Marine / Engineering or relevant fields.
• Candidate with experience in the marine or similar industry is preferred.
• Industry Technical Knowledge: Understanding of the marine or similar industry, including knowledge of similar products, services, market trends, and customer needs.
• Communication Skills: Good verbal and written communication skills, with the ability to effectively interact with customers, colleagues, and stakeholders at all levels.
• Organization and Attention to Detail: Good organizational skills, attention to detail, and the ability to multitask in a fast-paced environment.
• Problem-Solving Abilities: Good analytical and problem-solving skills to identify and address customer issues and sales challenges effectively.
• Team Player: Ability to work collaboratively with cross-functional teams and contribute to a positive and cooperative work environment.
• Adaptability: Flexibility to adapt to changing priorities and handle multiple tasks with tight deadlines.
• Professionalism: Demonstrated professionalism, integrity, and a customer-focused approach in all interactions.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

• Activity and resource planning for site.
• Organizing and motivating a project team at site.
• Controlling time management for site.
• Cost estimating and developing the budget for site project.
• Ensuring customer satisfaction.
• Analyzing and managing project risk.
• Planning and monitoring progress of the project.
• Managing reports and necessary documentation.
• Designing and applying appropriate project management standards.
• Managing the production of the required deliverables.
• Preparing and maintaining project, stage and exception plans as required.
• Managing project risks, including the development of contingency plans.
• Monitoring overall progress and use of resources, initiating corrective action where necessary.
• Applying change control and configuration management processes for the site project.
• Experinces in Singapore Process Plant Industry.

Main Responsibilities:

• Infrastructure Management: Administer servers, storage systems, hypervisors, and network equipment such as switches, firewalls and wireless access points.
• Network Administration: Manage network infrastructure, including routing protocols, DNS, Active Directory, and GPO. To also maintain current VPN connectivity.
• Technical Support: Provide Tier-2/Tier-3 in-person or remote support for escalated issues and troubleshoot hardware, software, and network incidents.
• Collaboration Tools & AV Support: Ensure smooth operation of Microsoft Teams, video conferencing, and meeting equipment.
• User Training: Conduct training and knowledge transfer for end-users on deployed systems, focusing on Microsoft 365 services.
• Peripheral Management: Oversee IP phones, printers, display TVs, CCTV systems, and door access, collaborating with vendors as needed.
• Cybersecurity: Support basic cybersecurity measures and compliance with IT policies.
• Project Support: Participate and/or take ownership in IT upgrades, deployments, and other technical initiatives.

Job requirements:

• Bachelor's Degree in IT / Computer Science / relevant field or higher, certifications in CCNA, VMware VCP, or Microsoft Certified: Azure Administrator is a plus.
• At least 5 years in IT infrastructure, with hands-on expertise in network protocols, virtualization practices, and Microsoft 365 administration and configuration.
• Proficiency in Active Directory, DNS, GPO, SQL Server, and backup solutions (e.g., Druva). Knowledgeable in networking topologies, protocols and methodologies and cybersecurity concepts will be an advantage.
• Excellent Problem-solving skills, good communication skills and fluent in common language, and teamwork ability.

We are developing and executing a shared strategic vision for Loyalty & Marketing Services platforms and products that enable Visa to be the world-leading data-driven payments company. As a Data Engineer, you will be part of world-class team of Engineers to define, drive and execute on this vision. We are looking for a self-motivated individual with software engineering skills and expertise with Java, Web technologies & Big data. The candidate will be extensively involved in hands-on activities including POCs, design, development, testing, and documentation. Candidate must be flexible and willing to switch tasks based on team's needs.

Primary responsibilities will include:

• Design and develop mission-critical systems, delivering high-availability and performance
• Work on development of new products and enhancements to existing systems iteratively by building quick POCs and converting ideas into real products
• Work closely with architects, business and technical stakeholders to develop high quality products and services that meet business requirements and expectations while applying the latest available tools and technology
• Instill best practices for software development, and deliver high quality work on tight schedules
• Identify opportunities for further enhancements and refinements to standards and processes
• Coordinate Continuous Integration activities, testing automation frameworks, and other related items in addition to contributing core product code
• Present technical solutions, capabilities, considerations, and features in business terms. Effectively communicate status, issues, and risks in a precise and timely manner

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

We are seeking a talented and experienced Structural Engineer to join our dynamic team in Singapore, Singapore. As a key member of our engineering department, you will play a crucial role in designing, analyzing, and overseeing the construction of various structural systems for commercial, residential, and industrial projects.

• Develop and review structural designs for buildings, bridges, and other infrastructure projects
• Perform complex structural analyses using advanced software tools to ensure the safety and integrity of structures
• Collaborate with architects, contractors, and other engineering disciplines to create innovative and efficient structural solutions
• Prepare detailed structural drawings, specifications, and calculations in compliance with local building codes and international standards
• Conduct site visits to monitor construction progress and ensure adherence to design specifications
• Analyze and resolve structural issues that arise during the construction phase
• Prepare and review technical reports, including structural calculations and design criteria
• Participate in client meetings and presentations to communicate design concepts and solutions
• Stay updated on the latest industry trends, technologies, and best practices in structural engineering

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The responsibilities shall include, but are not limited to, those contained in the following statements:

1. direct liaison with stakeholders in charge of project services (procurement/ draughting/ assets/ human resources);

2. specify scope of work and budgets for engineering activities, assets and 3rd party activities;

3. to be conversant with all items and conditions of the project both technically and commercially and to have a full understanding of the scope of work;

4. implementation, control and monitoring of overall safety and quality assurance in all project related activities as laid down in the company’s management system;

5. preparation and maintenance of budgets for the project assisted by the cost controller

6. preparation of the monthly reporting internal & external;

7. ensuring variations between actual costs and budget are monitored and controlled;

8. identifying and initiating any variations towards the client or approve/ reject variations from third parties on the basis of the contract T&C’s;

9. liaise with the client and ensure that project meetings are held with relevant personnel;

10. establishing all the resources from company’s departments needed to carry out the project.

11. encourage any technical developments or suggestions that will enhance the overall project engineering or operational efficiency;

12. ensure that all aspects of project administration, engineering and operations fulfil the contract requirements and are conducted in a safe, efficient and profitable manner;

13. conduct all activities within the management system, procedures and work instructions;

14. advise and assist commercial department with tenders for potential work;

15. ad-hoc duties as deemed required to complete the workscope.