Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Degree/Diploma in Electrical Engineering or equivalent
• Min 3 years experience in machine tool or automation environment
• Experience in CNC Machinery assembly process and automation will be advantageous
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical engineering or equivalent.
3. Must have valid API 510 and API 570 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Title: Sales Engineer
Industry: Marine

Job Summary:

As a Sales Engineer in the Marine Industry, you will be responsible for promoting and selling marine equipment, systems, and solutions to clients within the maritime sector. Your primary focus will be on understanding customer needs, providing technical expertise, and delivering tailored solutions that meet or exceed their requirements. This role requires a blend of technical knowledge, sales skills, and a deep understanding of marine engineering principles.

Responsibilities:

• Client Relationship Management:Build and maintain strong relationships with existing and potential clients in the marine industry.
  Understand client needs, preferences, and requirements to propose appropriate products and solutions.
  
• Technical Expertise:Provide technical guidance and support to clients on marine equipment, systems, and solutions.
  Conduct product presentations, demonstrations, and technical discussions with clients.
  
• Sales and Business Development:Identify new business opportunities and develop strategies to achieve sales targets.
  Prepare and deliver persuasive sales proposals and quotations.
  Negotiate contract terms and conditions with clients.
  
• Market and Product Knowledge:Stay updated on industry trends, market conditions, and competitor activities.
  Conduct market research and analysis to identify potential growth areas and product improvements.
  
• Collaboration:Coordinate with internal teams (engineering, logistics, etc.) to ensure timely delivery and installation of products.
  Work closely with suppliers and partners to leverage their expertise and capabilities.
  
• Documentation and Reporting:Prepare sales reports, forecasts, and other documentation as required.
  Maintain accurate records of sales activities and customer interactions in CRM systems.
  

Requirements:

• Education: Bachelor’s degree in Marine Engineering, Mechanical Engineering, Naval Architecture, or related field. A Master’s degree or additional certifications (e.g., MBA) is a plus.
• Experience:Proven experience (X years) in technical sales or sales engineering within the marine industry.
  Strong understanding of marine equipment, systems, and solutions.
  Experience in dealing with shipyards, shipowners, and marine equipment suppliers.
  
• Skills:Excellent communication and interpersonal skills.
  Ability to explain complex technical information in a clear and concise manner.
  Strong negotiation and presentation skills.
  Proficiency in MS Office Suite and CRM software (e.g., Salesforce).
  
• Personal Attributes:Self-motivated with a results-driven approach.
  Ability to work independently and as part of a team.
  Adaptability to travel domestically and internationally as required.
  

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Description:

- Assist HOD and supervise a team of technicians in delivering technical advices/ support to the various business units

- Actively involved in job estimation and WIP (Work-In-Progress) tracking

- Read Manual and Engineering Drawing for any re-engineering work required

- Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems

- Manage and supervise the MRO tasks allocated to the section in supporting commercial products, company's proprietary and non-proprietary Army products

- Deliver allocated and ad-hoc tasks within stipulated timeline and cost

- Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost

- Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches, studies and make necessary recommendations

- Submit investigation reports to relevant authority for approval

- Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained

- Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components

- Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible

- Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts

- Perform other related duties as assigned

Job Requirements:

- Degree in Mechanical/Mechatronic Engineering

- Experience in Component MRO in related industries

- Experience in effectively leading a team of Technicians

- Experience in SAP System is advantageous

- Knowledge in Army systems will be an added advantage

- Ability to read and interpret schematics and datasheets

- Strong technical skills in troubleshooting Engine, Transmission or Gearboxes

- Competent in Mechanical/Mechatronic system

- Familiar with components testing

- Ability to read and interpret Engineering Drawing and datasheets

- Good communication skills and a strong team player

- Able to work under pressure and tight timeline

- Good analytical and problem-solving skill

Sales Engineer offers specialized chemistry programs and related services for downstream oil and gas operations, aimed at maximizing production, protecting assets, and reducing operating costs and environmental impact. Through on-site problem-solving and innovative technologies, our team delivers solutions that assist energy customers in overcoming complex challenges in the most demanding energy frontiers. Our downstream team utilizes advanced chemistries and technologies to provide Oil & Gas customers with comprehensive and sustainable solutions to safeguard their assets, mitigate risks, and enhance profitability

Responsibilities:

• Leading Chemical Treatment Programs: Responsible for the chemical treatment programs at the client’s site, ensuring optimal performance and promptly addressing any deviations from the treatment plan.
• Analytical Field Testing: Comprehend the principles of field testing procedures and collaborate with service technicians to perform routine field testing
• Reporting and Communication: Provide regular chemical treatment program reports to clients, keeping them informed about progress and updates according to the agreed schedule.
• Inventory and Equipment Management: Oversee the planning of chemical stock levels in Singapore and manage inventory at client sites. Maintain an equipment maintenance program to ensure 100% equipment uptime and seamless operations.
• Monthly Technical Review: Prepare and deliver comprehensive monthly review materials to clients. These reviews serve as a valuable platform for discussing program effectiveness and identifying areas for improvement.
• Value-Added Projects: Actively source and develop value-added projects in collaboration with clients. These projects are designed to reduce the Total Cost of Operation (TCO) with Ecolab’s product.
• Troubleshooting and Collaboration: When clients encounter challenges related to chemical treatment programs or Ecolab’s products, step in to troubleshoot and collaborate with team members to find solutions.
• Proposal Development for New Opportunity: Develop chemical treatment proposals to enhance efficiency and address specific client requirements. Present new chemical treatment proposals to client. Lead the initiation and evaluation of new applications.
• Contract Management: Collaborate with application engineers and service technicians to ensure compliance with contractual obligations.
• Business Performance Review: Prepare and present the executive performance results material to the key client stakeholders and the head of the department. This can occur quarterly, half yearly or annually depending on contract obligation.
• Client Relationship Management: Building and nurturing strong relationships with clients is paramount. Frequent engagement ensures effective communication and mutual understanding.
• Billing and Invoicing Process: Maintain bookkeeping for client accounts under your responsibility. Verify billing amounts and work with the billing team to issue invoices to customers.

Requirements:

• Bachelor’s Degree (Chemical Engineering) with at least 8 years of relevant technical Sales & Service experience
• Should have technical sales or field sales support experience
• Must have a valid Class 3/3A Singapore Driver’s License
• Working knowledge of boilers, cooling towers, and wastewater treatment systems
• Experience with refinery or chemical processing is advantageous
• Curious and eagle to find out what customers’ needs and good approach to solutioning
• Effective critical thinking and problem solving skills
• Customer oriented and always ready to engage with customers
• Able to work in a refinery/chemical plant

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Energy Engineer

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

About the Role:

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Critical Responsibilities but not limited to:

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Requirements:

• Bachelor’s Degree in Engineering related fields
• Singapore Certified Energy Manager
• At least 5 years’ experience in energy engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behaviour
• Project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance, and calibration.
• Demonstrated capability in vendor service contracts management & knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-centred, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

Reg No: R22104540

EA License no: 94C3609

Responsibilites

• Assist the Project Manager in producing, analysing and accepting design and technical details
• Assist the Project Manager in developing, managing and overseeing a safety management system for projects across the organisation
• Provide Engineering support to project, production and yard staff as directed by Project Manager.
• Provide technical expertise during design activities and reviews.
• Produce technical documentation as required to support daily operations and tendering activities
• Coordinate stakeholder activities during construction phases of projects not limited to clients, suppliers and contractors
• Create and maintain a culture of continuing improvement in safety performance and awareness across teams & work areas
• Execute Project Plan assigned by Project Manager.

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types

A PROCESS AUTOMATION ENGINEERING COMPANY IS LOOKING FOR AN AUTOMATION ENGINEER

REQUIREMENT:

- DIPLOMA / DEGREE IN ELECTRICAL POWER AND CONTROL

- A GOOD KNOWLEDGE AND EXPERIENCE IN PLC PROGRAMMING AND TROUBLESHOOTING

- MIN 5 YEARS OF WORKING EXPERIENCE

JOB DESCRIPTION

- PLC DESIGN / PROGRAMMING

- TROUBLESHOOTING

- TESTING, COMMISSIONING OF EQUIPMENT / MACHINERY FOR FOOD & BEVERAGE, CHEMICAL INDUSTRIES ...

• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement)
• Design systems and components that meet needs and requirements
• Produce outline designs
• Conduct experiments methodically, analyse data and interpret results
• Test and evaluate theoretical designs
• Identify, formulate and produce effective solutions to emerging problems
• Evaluate final product’s overall performance, reliability and safety
• Alter and modify design to meet requirements and to eliminate malfunctions
• Estimate budget and scope of project
• Solicit observations from operators
• Prepare product reports and documentation
• Engage in lifelong learning and develop new theories or methods

Roles & Responsibilities

Official working hours: 5 Days

Salary: Basic $3000 - $5000 plus Overtime

Working location: Tuas or Site

• To carry out inspection, troubleshooting & repair of marine equipment such as hatch cover, winches and crane on site.
• To carry overhauling of marine equipment or components in workshop, such as winches, cylinders , motor.

Requirements

We are looking for an experienced Hydraulic/Mechanical Service Engineer who capable to work in marine industry.

• Nitec, Diploma or Degree in Mechanical or Electrical Engineering or equivalent
• At least 1 years working experience in Mechanical, Hydraulic, Electrical, Marine, or heavy engineering Industry. Preferably with service and troubleshooting skill.
• Capable in mechanical and hydraulic and mechanical troubleshooting.
• Good coordination skill and capable to supervise repair team at shipyard and during vessel repair.
• Positive attitude and able to work under pressure to complete work within timeframe.
• Eager to learn and good team player.
• Capable to prepare service reports and able to communicate well with colleague, customer and contractor.
• Willing to work overtime and travel overseas for short period.

Job Scope

The Process Engineer applies engineering principles and techniques to optimise the production processes in a manufacturing environment to meet organisational objectives. His/her work also includes troubleshooting process engineering issues and developing work instructions for out-of-control processes. He/she will be required to analyse manufacturing/maintenance issues and recommend engineering solutions.

In addition, the Process Engineer leads production and manufacturing systems improvement projects and is expected to develop operation plans per organisational objectives. He/she would also be required to ensure compliance with workplace safety, health and other regulatory requirements in his/her line.

The Process Engineer is required to have strong communication skills to collaborate with the production and maintenance team to meet organisational outcomes.

The process engineer will report directly to the Managing Director and Plant Manager.

Tasks

• Adopt new technologies to improve process monitoring.
• Develop work instruction and control plan.
• Enforce compliance with safety and good manufacturing practices and processes in production areas.
• Implement network solutions for production improvement.
• Investigate Out of Control (OOC) and improve the Process Capability (cpk).
• Investigate the root cause of process failures.
• Lead continuous improvement projects.
• Lead working level community exploring opportunities for improvement projects.
• Maintain quality assurance system.
• Manage manufacturing processes using statistical modelling.
• Monitor process performance data to establish good control parameters.
• Review the abnormality report.
• Troubleshoot process engineering issues.
• Conduct technical presentations to management and peers.
• Perform training.

Qualification and Experience

· At least a diploma or degree in Electrical, Mechanical or Process Engineering.

· At least 3 to 4 years of work experience in the Electromechanical Industries as a process technician or associate engineer.

· Candidates with the following experience will be an advantage

o Recycling or refining industries (Incinerator, Crushing, Melting, Plating, etc)

o Project Management

· A team player to work alongside with peers

· Willingness to attend certain courses/licences such as Hazardous Materials Transport Driver (HMDR), WSH Work at Height etc on behalf of the company

· Willing to travel occasionally if required

· Any other duties and job scopes that may be assigned by the Managing Director/Plant Manager

· Class 3 driving licence (mandatory)

Benefits Highlights

• 5 working days, regular working hours, work life balance
• AWS, variable bonus and yearly increment
• Good staff benefits with insurances, dental & medical benefits
• Daily transport and tea allowances
• Lunch provided

Description & Requirements

Job Summary:

We are looking for a highly skilled High Voltage/Medium Voltage Engineer to join our team. The ideal candidate will be responsible for the design, development, maintenance, and troubleshooting of high voltage and medium voltage systems in offshore substations. This role requires extensive knowledge of electrical engineering principles, offshore operations, and safety regulations.

Responsibilities:

• Design and Development: Collaborate with the system supplier to design and develop HV/MV systems and equipment (Electrical, Protection & SCADA) for offshore substations.
• System Analysis: Familiar with Electrical calculations and system analysis to determine specifications and ensure optimal performance to meet client requirements.
• Compliance: Ensure all HV/MV systems comply with relevant safety standards and regulations.
• Inspection and Testing: Perform regular inspections, conduct factory testing and support in field commissioning to assess the technical compliance and performance of HV/MV equipment.
• Troubleshooting and Technical Support: Diagnose and provide technical support in resolving technical issues on HV/MV systems and guidance to junior engineers and technicians.
• Collaboration: Work closely with other engineers, technicians, vendors and regulatory bodies and clients to address and solve problems related to HV/MV systems.
• Documentation: Prepare detailed reports, system architecture diagrams, purchase specifications, functional description and control philosophy to document system designs, construction, modifications, and maintenance activities.
• Preventative Maintenance: Collaborate with the system supplier to develop and implement preventative maintenance procedures for HV/MV systems to ensure safety and performance.

Requirements:

• Education: Minimum bachelor’s degree in electrical engineering or related field.
• Experience: At least 3 ~ 5 years of relevant experience in high voltage or medium voltage engineering, preferably in an offshore environment.
• Skills: Strong analytical and problem-solving skills, excellent communication and teamwork abilities, proficiency in using electrical design software.
• Certifications: Relevant certifications in high voltage or medium voltage engineering are a plus.
• Knowledge: In-depth knowledge of electrical engineering principles, high voltage systems, offshore operations, and safety regulations.
• Innovation: Ability to stay up to date with the latest advancements and best practices in HV/MV engineering.
• Leadership: Capability to lead and mentor junior engineers and commitment to safety.
• Adaptability: Ability to work as a team in challenging offshore environment and possess good planning, organizational, interpersonal skills with adaption to ever-changing

Degree/Diploma in Electrical Engineering or related fields

Must have minimum Two (5) year work experience in the servicing, maintenance and troubleshooting on the Sewage water network, pumping station and reclamation plant with ancillary system.

Responsibilities

· Manage & Lead engineering team

· Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations to as part of the engineering project team

· Team development

· QA/QC documentation review of engineering deliverables

· Liaison with clients, project managers, architects, contractors

· Resolve any technical problems faced during project design and/or construction stages

· Any other required duties as required by the Project Team.

· Candidate who has knowledge in the application of Bentley BIM models and project scheduling software Primavera P6 will be added as an advantage.

As a mechanical engineer, your responsibilities can vary based on the industry and specific role, but they generally include:

1. Design and Development:Create and refine mechanical systems and components using CAD (Computer-Aided Design) software.
   Develop prototypes and test designs to ensure they meet required specifications and performance standards.
   Use engineering principles to solve design problems and improve product functionality.
   
2. Analysis and Testing:Perform simulations and analyses to predict how components will behave under various conditions (e.g., stress, temperature, and load).
   Conduct tests and experiments to validate design concepts and performance.
   
3. Project Management:Plan, coordinate, and oversee engineering projects from conception through completion.
   Manage project timelines, budgets, and resources.
   Collaborate with other engineers, stakeholders, and clients to ensure project objectives are met.
   
4. Manufacturing and Production:Develop and oversee manufacturing processes and procedures.
   Ensure that products are produced efficiently and meet quality standards.
   Work with suppliers and manufacturers to source materials and components.
   
5. Maintenance and Troubleshooting:Monitor and maintain mechanical systems and equipment.
   Diagnose and resolve mechanical issues or failures.
   Implement improvements to enhance reliability and performance.
   
6. Compliance and Documentation:Ensure designs and processes comply with industry standards, regulations, and safety guidelines.
   Prepare detailed documentation, including design specifications, reports, and user manuals.
   
7. Research and Innovation:Stay updated with advancements in mechanical engineering and incorporate new technologies into designs.
   Conduct research to explore new materials, techniques, and systems.
   
8. Collaboration and Communication:Work with cross-functional teams, including electrical engineers, software engineers, and project managers.
   Communicate technical information clearly to non-engineering stakeholders.
   

These responsibilities can vary significantly depending on the specific sector, such as aerospace, automotive, manufacturing, or energy.

Assist Project Manager on project functions included but not limited to project management, risk control management etc.

Prepare, plan, and submit project related documents such as method statements, risk assessments, test reports etc.

Coordinate, attend and supervise a team in daily transmission cable testing and commissioning work.

Ensure works are carried out safely, timely and within specifications.

Ensure quality of work is achieved, complying with best industry practices, and following workplace health and safety requirements.

Coordinate and liaise with main contractor, subcontractors, and site supervisors regarding on-site requirements and progress.

Site management, conduct site surveys and resolve problems on site.

Any other duties that may be assigned.

Requirements

Degree in Electrical Engineering recognised by Professional Engineers Board Singapore. Entry level welcome to apply.

Passion in Electrical Engineering and eager to start their career in the industry.

Good oral and written communication skills.

A team player with a positive working attitude and the ability to handle tight deadlines.

Proactive and flexible, able to work on site.

• Class 3 driving licence.

Project: HDB at Geylang (BTO)

Job Description:

• Provide standing supervision as and when directed by Consultant team.
• Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.
• Compile relevant equipment, material, inspection and test certificated submitted by the contractors as required for the project records.
• Ensure company's safety rule is complied with.
• Resolve all site issues and ensure timely completion of the project.
• Ensure all works are carried out in accordance to drawings and specifications.
• Attend site meetings and perform site inspections.
• Prepare weekly/monthly progress reports.
• Any other task assigned from time to time.
• Estimated commencement of work in March 2025.

Job Requirements:

• Degree in Civil/Structural Engineering from a recognized university and registered with IES/ACES as a Resident Engineer
• Minimum 5 years experiences as Resident Engineer in precast high rise residential building project.
• Experience in building projects, experience in HDB projects will be an advantage.
• Excellent interpersonal and communication skills
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Project: HDB at Yishun (BTO)

Job Description:

• Provide standing supervision as and when directed by Consultant team.
• Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.
• Compile relevant equipment, material, inspection and test certificated submitted by the contractors as required for the project records.
• Ensure company's safety rule is complied with.
• Resolve all site issues and ensure timely completion of the project.
• Ensure all works are carried out in accordance to drawings and specifications.
• Attend site meetings and perform site inspections.
• Prepare weekly/monthly progress reports.
• Any other task assigned from time to time.
• Estimated commencement of work in March 2025.

Job Requirements:

• Degree in Civil/Structural Engineering from a recognized university and registered with IES/ACES as a Resident Engineer
• Minimum 3 years experiences as Resident Engineer in precast high rise residential building project.
• Experience in building projects, experience in HDB projects will be an advantage.
• Excellent interpersonal and communication skills
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application