The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• Become the technical Expert for the respective machine specialization.
• Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Se expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials / Material Sciences Engineering
• Min 5 years of relevant work experience in Photo Equipment (Track) in semiconductor industry
• Excellent communication, interpersonal and leadership skills
• Strong analytical skill and able to work under pressure in fast pace environment
• Proficient with MS Power Point, Excel, Excel VBA, Power BI

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

JOB DESCRIPTION

We are looking for a strong candidate with strong AI background and experiences in audio, speech AI training for industrial projects on audio & speech recognitions.

Key Responsibilities: Work on audio processing, data preparation and multiple model training of multi-language code-switch ASR for projects.

JOB REQUIREMENT

• Has a related B.S degree in Computer Science or Software Engineering.
• Experiences in speech signal processing, speech recognition, in both hybrid models, supervised E2E models, LLMs fine-tuned models and deep learning
• Strong in the following programming languages: Python, Pytorch, C/C++, Linux Bash/Shell
• Knowledge in web-based and app developments for demo systems is advantageous

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Responsibilities:

• Lead and direct cross-functional team in program execution
• Ensure proper qualification of new projects and successful implementation of programs in the production/manufacturing unit
• Track and monitor project progress to ensure project schedules and cost objectives are met
• Actively follow on sales leads and take lead in business development
• Serve as primary technical contact with customers on strategic or politically sensitive issues
• Provide support to BD manager in generating quotation for molding projects involving new toolings
• Provide customer support and perform in BD activities to direct customers; Serve as primary technical contact with customers on strategic or politically sensitive issues
• Work with Manufacturing on developing and establishing workflows and production concepts (to optimize production efficiency &meet customers’ requirements)
• Identify and specify engineering requirements for new projects
• Initiate equipment procurement activities for new projects when needed (with Purchasing)
• Plan and execute tooling qualification activities with supporting groups to achieve successful project execution
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Job Requirements:

• Diploma/ Degree in Mechanical Engineering or related
• Minimum 3 years of working experience in project management & production process
• Plastic injection moulding and mould assembly background preferred

Note

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

Job Responsibilities:

• Handling MEMS modules development related project independently.
• Host regular PRS review meeting with project owners of TD integration and Fab module engineers.
• Provide robust recipe to TD PI for new process developing
• Co work with fab module engineers to provide solutions for projects
• Provide risk assessments for new developing projects.
• Continuous improvement

Job Requirements:

• Bachelor degree in any Engineering discipline
• At least 3 years' experience from Etch/Diffusion/Thin Film/Photo process engineer
• Integration experience is a plus
• Capable of using DPE, 7 QC tools, FMEA, SPC, 3L5W, 8D

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Thin Film department diverse team of talent. You will be responsible for supporting Thin Film Equipment startup, maintenance and related activities to support daily production and achieve operation targets.

What you will be working on:

• Support CVD/PVD equipment engineering related activities to achieve operation targets and meet company objectives
• Participate in Continuous Improvement for Cost, Yield, Productivity and Uptime
• New Equipment Startup and Relocation to support Production Plan
• Tool Ownership and accountability for Uptime, Wafers scrap, Parts Management, Equipment Down Memo Reduction
• Troubleshoot and resolve Equipment issues to support daily production
• Review and optimize equipment maintenance procedures
• Consumable and spare management ensure adequate provision
• Participate in technology transfer from motherfab
• Participate in implementation of TSMC/NXP BKMs and generate SSMC BKMs
• Update of OIs and SOPs to document real and best practices
• Preventive Maintenance Planning and alignment of schedule with Manufacturing
• Conduct Training and certification for new PM crew in terms of Hands on and Theory
• Drive Manufacturing for Monitoring Time reduction to improve Uptime
• Lead/ Participate in Transform Platform and generate LSS, BKMs and Trade Secrets for value creation for the company
• Able to perform weekend 12-hour shift or Swing Shift or any shift pattern as defined by Manager

More About You:

• Bachelor in Engineering (Mechanical/Mechatronic/Electrical/Electronic)
• 1-3 years’ experience in semiconductor manufacturing environment.
• 5 years direct experience in CVD equipment for Diploma holders
• Knowledge in the following tool types AMAT Endura , Centura WxZ, Novellus Altus, Tel Scrubber, Jusung Eureka
• At least 3 years’ experience in same field will be consider for senior position
• A strong background and experience in semiconductor manufacturing

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Highlights:

• Comprehensive Medical Benefits (health insurance, dental)
• Transport Allowance
• AWS + Performance Bonus
• Birthday Incentive

Job Summary:

We are seeking a Senior / Security Systems Project Engineer, where you will manage and execute security projects, ensuring timely delivery, within budget, and with high-quality standards. You’ll act as the main client contact, overseeing project milestones and ensuring customer satisfaction throughout the process.

About the Company:

Our client is a trusted and leader provider of integrated security solutions, specializing in CCTV, card access, and alarm systems. With over 30 years of experience, the company offers innovative and reliable security services to residential, commercial, and government clients, focusing on creating safer environments through cutting-edge technology.

Responsibilities:

• Lead and manage security systems projects, ensuring alignment with project objectives and timelines.
• Collaborate with stakeholders to drive project milestones and meet strict deadlines.
• Act as the single point of contact for clients, ensuring satisfaction and managing escalations.
• Ensure projects deliver as-sold solutions, stay within the baseline budget, and are completed on time, all while meeting quality and client satisfaction criteria.
• Coordinate project team activities through effective task delegation, resource assignment, and program management.
• Maintain proper project documentation and ensure all required paperwork is completed accurately.
• Perform any additional tasks as assigned.

Requirements:

• Minimum Diploma in Electronics & Communication Engineering or a related field.
• Candidates with experience in the security systems industry will be highly preferred.
• Strong communicator with excellent coordination and interpersonal skills.
• Sensitive to deadlines with a strong ability to manage resources efficiently.
• Basic technical knowledge of ELV, Automation, Networking, and Security Systems (CCTV, Card Access, Alarm Systems) will be advantageous.
• Highly motivated individual with a proactive attitude and strong problem-solving capabilities.

How to Apply

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

Responsibilities

• Coordinate with internal team in Singapore liaise with customers / consultants on day to day basis
• Preparation of project documents including BQ
• Handling Design & Build projects
• Prepare optimised design solutions for projects
• Prepare Design drawings (Single Line Drawings & layout)
• Prepare design calculations incl voltage drop, short circuit current etc.
• Support multiple M&E projects concurrently
• Lead project meetings and work with team members to achieve the deliverables on-time
• Ensure drawings & documents are well maintained & stored in a timely manner
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Electrical Engineering
• Minimum 2 yrs of relevant hands-on M&E experience in construction industry, LTA projects, mixed development etc
• Need to be familiar with Singapore codes such as SS638 (CP5), SS650, SS555 etc
• Hands-on experience in AutoCAD drawings is preferred
• Familiarity in BIM (Revit / Navisworks) is advantageous
• Having consultancy experience is preferred
• Possess effective organizational and follow-up skills, meticulous
• Good communication skills
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

*We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

EA License No.: 22C1153

Ref: PTEPL

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

Responsibilities:

• Develop and deploy machine learning models: Design, build, and optimize machine learning models and algorithms to solve specific business problems. Collaborate with cross-functional teams to gather requirements, define objectives, and deploy models into production environments.
• Model training and evaluation: Train and fine-tune machine learning models using appropriate algorithms and techniques. Evaluate model performance and identify areas for improvement, employing techniques such as cross-validation, hyperparameter optimization, and ensemble methods.
• Model deployment and integration: Collaborate with software engineers and DevOps teams to deploy machine learning models into production environments. Implement APIs and integrate models with existing systems and applications to enable real-time decision-making.
• Performance monitoring and maintenance: Monitor model performance and address any issues or anomalies that arise. Continuously improve models by refining algorithms, optimizing code, and incorporating feedback from users and stakeholders.
• Data analysis and insights: Perform exploratory data analysis, generate insights, and present findings to stakeholders. Use statistical methods and visualization techniques to communicate complex concepts and patterns effectively.
• Stay up-to-date with the latest advancements: Keep abreast of the latest research and trends in machine learning and artificial intelligence. Evaluate and recommend new tools, libraries, and methodologies to enhance the efficiency and effectiveness of the machine learning workflow.

Requirements:

• Education: Bachelor's or Master's degree in Computer Science, Data Science, Machine Learning, or a related field. An equivalent combination of education and experience will also be considered.
• Experience: At least 2 years’ experience working in a similar role. Hands-on experience in designing, developing, and deploying machine learning models in real-world applications.
• Solid understanding of machine learning algorithms, techniques, and libraries (e.g., TensorFlow, PyTorch, scikit-learn).
• Experience with working on Large Language Models and Generative AI technology is a plus.

Technical skills:

1. Strong programming skills in languages such as Python.
2. Proficiency in machine learning frameworks such as TensorFlow, PyTorch, or Scikit-Learn etc.
3. Solid understanding of Statistical Analysis, Probability Theory, and Hypothesis Testing.
4. Familiarity with machine learning tools on cloud platforms (e.g., AWS, Azure, GCP) and distributed computing frameworks (e.g., Spark) is a plus.
5. Problem-solving and analytical mindset: Ability to analyze complex problems, break them down into solvable components, and develop innovative machine learning solutions. Strong mathematical and analytical skills are essential.
6. Communication and collaboration: Excellent verbal and written communication skills, with the ability to convey technical concepts to both technical and non-technical stakeholders. Proven ability to work collaboratively in a team environment and effectively manage multiple priorities.
7. Adaptability and continuous learning: Willingness to adapt to evolving technologies and learn new tools and techniques. Demonstrated commitment to staying updated with the latest advancements in machine learning and artificial intelligence.

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Responsibilities:

• Coordinate and supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical or in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and a team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Our Client:

• Cranes Lifting Industry
• 5 Days, Office Hours
• West Region
• Up to $4300 Per Month

Responsibilities:

• Investigate all incidents and product nonconformity to identify causes and ways to prevent occurrence in future.
• Support and promote the company incident report and management system.
• Provide guidance to business on consistency of HSE and QMS expertise by participating in Management reviews and audits.
• Monitor company’s ISO 9001 Management System are implemented and maintained in Singapore and Malaysia.
• Control of system documentations and procedures for Southeast Asia including Australia.
• Coordinate with business on training and holding of dialogue sessions with relevant customers, contractors, suppliers to ensure awareness and compliance with all HSE requirement impacting company operations.
• Ensure quality procedures are adhered throughout organisation and highlight noncompliance.
• Conduct quality check and inspection on manufacturing and installation processes pertaining to current range of products.
• Recommend quality control and inspection requirements in consultation with regional HSE and QMS whenever necessary for final review and approval by region director for implementation.
• Participate in HSE committee meetings and implement HSE procedures and standards in all workplace activities to achieve the required safety standard.
• Chair monthly QIP meeting and submit monthly quality report.

Requirements:

• Qualification in Engineering, Safety or Quality.
• Minimum 2 years of working experience in QA/QC in a manufacturing or construction environment.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

• Administration experience of Storage Arrays of multiple vendors
• Administration experience of Different Cloud platforms like AWS and Azure.
• Hitachi midrange and enterprise storage (AMS, HUS, VSP & Gx00 etc)
• Experience on AWS Cloud Specific technologies like EC2, S3, Route53, Cloud Formation, Elastic IPs, VPC, RDS and Cloud Watch.
• Configuring Elastic Load Balancers with EC2 Auto Scaling groups.
• Optimized Volumes and EC2 Instances and created multi AZ VPC Instances
• Good Understanding of AWS Elastic Block storage(EBS), various volume types and Utilization of different types of EBS Volumes based on client requirement.
• Storage performance tuning and troubleshooting.
• Incident management and change management process knowledge.
• Project handling experience from sizing to roll-out, preferably with project management background
  Strong analytical skill, very initiative, good planning & systematic execution

1. Manage the team of RTOs, supervision of site set up, earth works, drainage works and reinstatement works

2. Report to Qualified Person

3. Prepare weekly reports and monthly reports.

4. Attend the meeting with client and consultants

5. Report any non-compliances to Qualified Person

6. Ensure the site Safety

The information included in a network engineer job description usually contains a list of specific duties and responsibilities and mentions the required qualifications and skills for the role. Employers typically post their preferences and requirements in the job description to help attract matching and suitable candidates. This incentivises candidates to prepare their applications accordingly to showcase their potential fit, which can result in a more efficient hiring process. The job description may also indicate details about the work environment such as the nature of the business and the type of data you can work with.Depending on the employer's requirements, network engineers may be stationed at an office or travel to work sites to provide support when necessary. A network engineer typically designs, installs, configures and maintains computer networks. They also troubleshoot any issues and ensure that the network is secure and efficient. Network engineers frequently collaborate with other information technology (IT) team members to develop network policies and stay up-to-date with emerging technologies to ensure the network remains secure and scalable.

Responsibilities

• Develop technical designs of roadworks and highways, traffic diversion schemes and delivery models according to different standards and requirements.
• Planning and supervising projects.
• Responsible for temporary traffic diversion scheme to suit construction progress.
• Coordination with relevant authorities for purpose of obtaining information and approvals.
• Preparation of Traffic Management Plan (TMP) for construction project.
• Preparation of tender documents and proposals.
• Preparation of Traffic Management Plan for road widening and viaduct construction project.
• Stakeholder management & liaising with different authorities.

Requirements

• Preferably with a Degree in Traffic Engineering and above or equivalent.
• Min 10 years experience in construction industry .
• Able to work as a team, assertive, independent, and proactive.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

TLG Technology is a leading provider of cutting-edge technology in nanofabrication equipment, semiconductor wafer processing and testing equipment, metrology, and alternative source solutions for the semiconductor wafer and electronics industries.

We invite you to join our dynamic team with the following career opportunity:

Responsibilities:

You will be responsible for providing service support for a range of semiconductor wafer processing equipment, including Automatic Wet Benches, Metrology, Spin Rinser/IPA Dryers, and laboratory equipment/instruments.

Requirements:

• Relevant experience and strong skills in mechatronics or electrical troubleshooting will be an advantage.

• A Technical Education, Diploma, or Degree in any engineering discipline.

• Ability to work independently and collaboratively as part of a team.

• Hardworking attitude, willingness to learn, good character, and a commitment to working with our growing company for at least three years or more.

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

1. Undertake project management and product design works.

2. Provides customer support from product development to realisation.

3. Support cost study on machining and project works.

4. Handle all jigs and fixtures development works on machining jobs.

5. Represent company when dealing with subcontractors relating to hardware support.

6. Ensure safe operations and handling at all times

Our client is a manufacturer that designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits. They are currently hiring for a Process Engineer and will like to invite suitable candidates to send your detailed resume to [email protected]

Process Engineer

Responsibilities:

• Define and Document Equipment process requirement and specification.
• Perform Process characterization to optimize critical process paths in order to meet equipment specification.
• Review, simplify and optimize Internal Buy Off specification for equipment together with Quality Assurance Department.
• Participate in continuous process improvement activities to enhance Equipment capability.
• Support Equipment manufacturing activities by helping to trouble-shoot and resolve process-related issues
• Support other internal departments to handle customers’ process related issues and recommend technical solutions
• Perform data analysis using statistical techniques and conduct process capability studies
• Transfer process knowledge to in house Engineers and Technicians to ensure optimal equipment performance.
• Equipment UPH projection calculation base on specific process parameter.

Requirements:

• Degree in Production / Mechanical / Material Science Engineering
• At least 3 years experience in an equipment manufacturing environment with a process engineering and background
• Strong interest in the development of new manufacturing processes
• Experience in process design and control in the area of laser marking process.
• Knowledge in Material Science will be added advantage.
• Knowledge in cycle time calculation.
• Trained in SPC, DOE and other statistical tools