Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD. 19C9772 67026282

Responsibilities

• Troubleshoot and provide solutions for MES & ERP problems in recipe execution and recipe authoring.
• Liaise with QA to provide approved change control documentation for all MES system changes.
• Design, create, write and execute to a high-quality standard, test and validation protocols, risk assessments, and system documentation.
• Design, create, write and/or make all required changes to MES & ERP Recipes, worksheets, equipment and material spec's including phase transition logic to a high-quality standard.
• Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures are aligned to MES processes and vice versa.
• Design, create, write and provide training for all other site personnel on their related MES roles and arrange system access.
• Participate in MES knowledge exchanges, MES Governance meetings and manage issues, work-around and fixes identified.
• Work closely with IT regarding upgrades, patching, hardware support, security and system access and provide technical expertise in implementing upgrades and patching.
• Liaise with Global MES on required system improvements.
• Provide support to other MES system users as required to ensure business continuity.
• Participate in MES projects from initiation to ensure MES system or hardware requirements are taken into consideration.
• Ensure maintenance/replacement of MES hardware, printers, scales, scanners and bar-code labelers. Review for upgrades periodically.
• Keep other MES Team Members up to date on MES changes Documentation of all activities in line with cGMP requirements.
• Cross training within the team and training of new team members.
• Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems.
• Adheres to and supports all health and safety standards, procedures and policies.

Requirements

• Werum PAS-X/Aspen/Syncade, Siemens MES (Camstar / Opcenter / Simatic IT) product hands-on experience for full application configurations including interface with SAP and automation systems
• In-depth of knowledge of Pharmaceutical business process (Chemicals (W&D, Solid bulk Mfg., packaging and other unit operations), Bio Pharma processes)
• Creation of business process flow diagram
• Master Batch Record creation in Werum PAS-X
• Knowledge on Industry Standards S88 and ISA S95
• Experience working on projects in the pharmaceutical and/or biotechnology industries knowledge of GAMP lifecycle and quality management processes employed in the pharmaceutical sector Excellent communication skills and collaborative with team members and external groups

Responsibilities

• Troubleshoot and provide solutions for MES & ERP problems in recipe execution and recipe authoring.
• Liaise with QA to provide approved change control documentation for all MES system changes.
• Design, create, write and execute to a high-quality standard, test and validation protocols, risk assessments, and system documentation.
• Design, create, write and/or make all required changes to MES & ERP Recipes, worksheets, equipment and material spec's including phase transition logic to a high-quality standard.
• Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures are aligned to MES processes and vice versa.
• Design, create, write and provide training for all other site personnel on their related MES roles and arrange system access.
• Participate in MES knowledge exchanges, MES Governance meetings and manage issues, work-around and fixes identified.
• Work closely with IT regarding upgrades, patching, hardware support, security and system access and provide technical expertise in implementing upgrades and patching.
• Liaise with Global MES on required system improvements.
• Provide support to other MES system users as required to ensure business continuity.
• Participate in MES projects from initiation to ensure MES system or hardware requirements are taken into consideration.
• Ensure maintenance/replacement of MES hardware, printers, scales, scanners and bar-code labelers. Review for upgrades periodically.
• Keep other MES Team Members up to date on MES changes Documentation of all activities in line with cGMP requirements.
• Cross training within the team and training of new team members.
• Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems.
• Adheres to and supports all health and safety standards, procedures and policies.

Requirements

• Werum PAS-X/Aspen/Syncade, Siemens MES (Camstar / Opcenter / Simatic IT) product hands-on experience for full application configurations including interface with SAP and automation systems
• In-depth of knowledge of Pharmaceutical business process (Chemicals (W&D, Solid bulk Mfg., packaging and other unit operations), Bio Pharma processes)
• Creation of business process flow diagram
• Master Batch Record creation in Werum PAS-X
• Knowledge on Industry Standards S88 and ISA S95
• Experience working on projects in the pharmaceutical and/or biotechnology industries knowledge of GAMP lifecycle and quality management processes employed in the pharmaceutical sector Excellent communication skills and collaborative with team members and external groups

Mon to Fri: 9am to 5:30pm

Objective:

We are looking for a Field Application Engineer to drive new projects and business pipelines for FY24 growth.

Responsibilities:

• Responsible for pre & post sales requirements of Company’s Power Quality products (preparing technical documents & commercial proposals)

• Provides technical support to distributors and key account customer for troubleshooting, on-site testing and commissioning

• Provides trainings to distributors and customers to enhance their capabilities

• Responsible for design-in (spec-in) of company’s products with the distributor in the appointed territory and market segments, achieve yearly design-in targets

• Lookout for opportunities to cross out competitor part

• Coordinate PQ Application and On-site Measurement Services in line with the company strategy

• Maintains good relationship with both end-users, local distributors, external test laboratories and build customer loyalty through field visits

• Maintenance of existing customers base and achieve development of new potential customers.

• Effective use of CRM/CAS system to record key activities, including customer visit/call reports and opportunities

• Able to communicate and work well with internal departments.

• Any other responsibilities as assigned by the Strategic Account Manager or/and Sales Manager

Job Requirements:

• Possess fundamental PQ Harmonic knowledge and application.

• Basic knowledge of EMC / EMI compliance is a plus

• Bachelor’s degree or equivalent in Electrical/Electronics/Mechatronics Engineering or other relevant majors

• Prefer minimum 3 years technical experience in the field of industrial products

• Able to operate common test equipment like voltage meter, clamp meter, oscilloscope, analyzer, etc.

• Good interpersonal and communication skills

• Well-versed in basic MS Office tools (eg. Word, Excel) and SAP (preferred)

• Interpersonal savvy

• Good follow up and consultative approach attitude

• Able to work independently and resourceful

What we offer:

• Attractive remuneration and incentive package

• Annual leave, medical welfare and insurance

• Provide opportunities for career advancement within the company

C2D Solutions Pte Ltd is Hiring!!!

Only Singaporean and SPR need to apply!

Web: www.c2d.com.sg

Tel: +65 6392 2949

Job Description: Mechanical & Electrical Engineer

Company Overview

• C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimisation.
• We were established in 2012 and operates as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions.
• We have a team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers to ensure first-rate engineering solutions for our clients.
• We have grown over the years and are continuously increasing our market presence and are seeking like-minded individuals to join our team as a Mechanical & Electrical Engineer.

Job Responsibilities:

• Design and commissioning of building mechanical & electrical systems including, fire protection, air-conditioning & mechanical ventilation, smoke control systems, power distribution systems, lighting systems, etc.
• Perform Computational Fluid Dynamics simulations to design & optimize ventilation, pollution control and fire & smoke control systems.
• Understand and familiarize with Singapore authority requirements and adherence to Singapore building code of practices.
• Involve with project site meetings to understand client requirements.
• Participate in Testing & Commissioning phase of completed mechanical & electrical installations.
• Appointed engineers will be attached to Senior Engineers who will provide Internal Training and Supervision.

Why you should apply:

1. We are a progressive company that place equal emphasis on personal and professional growth.
2. Appointed engineers with interest and potential will beoffered sponsorship to continue professional upgrading tofurther their engineering career development.
3. Career development includes the opportunity to register as aProfessional Engineer (PE) and/or Fire Safety Engineer (FSE).
4. Opportunities to work on dynamic and impactful buildingprojects
5. Our projects’ portfolio includes pharmaceutical & semi-conductor manufacturing facilities, air & land infra-structurefacilities, hospitality & conventions facilities, etc.

C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimization. We were establishedin 2012 and operate as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions. Our team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers ensure first-rate engineering solutions for our clients. Since 2012 we have grown exponentially and are continuously increasing our market presence and are seeking like-minded individuals with mechanical engineering or building services degrees to join our team as a Mechanical & Electrical Engineer.

Qualifications:

- 3-5 years working experience in C&S Engineering Consultancy Firm.

- Degree is recognized by Professional Engineers Board (PEB), Singapore.

- Preferably, has passed FEE, examination prescribed by PEB.

- Conversant with latest design codes and authority requirements.

- Competency in design software such as ETABS, SAFE, SAP2000, GSA, IDEA StatiCa, Tekla etc.

- Able to work independently to support the QP and directors.

- A team player and to carry out tasks/duties in a positive and dignified manner

Responsibilities:

- Responsible for the execution of civil and structural design involving the preparation of calculations, drawings and detailing.

- Assist in producing tender specifications and design requirements for calling of tender contracts.

- Attend project/technical meetings with authorities, developers and contractors.

- Involve in project planning, implementation and close monitoring of projects.

- Project coordination including submission to local authorities and liaison during the construction stage.

- Liaise with clients, consultants and authorities on technical matters.

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

We are a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing if navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

THE ROLE:

To validate and characterize the most cut edge SerDes design including PAM4 224G transceiver on the most advance technology node. Using the latest measuring equipment the semiconductor industry has to offer to benchmark AMD’s SerDes against the challenging industry standard.

THE PERSON:

We are looking for a meticulous and motivated engineer to join the validation teams.

KEY RESPONSIBILITIES:

• Post Silicon Validation of high speed SerDes
• Understand the industry requirements and specification for high speed IO
• Develop validation methodology to validate new industry standard and requirements.
• Characterize the latest SerDes design
• SerDes debug with designers on Silicon
• Tuned the latest design to performance at the most optimum setting
• Generate specification base on measured results
• Work with remote teams to co-ordinate distributed task.
• Support FAE on customer’s issues relating to high Speed Ios

PREFERRED EXPERIENCE:

• Experience in high speed IO SerDes post-silicon validation.
• In-depth knowledge of the latest industry standards such as PCIe, Display Port, JESD, SDI, OIF-CEI-11G/25G/56G/112G-VSR/SR/MR/LR, IEEE 802.3 KR/CR/CAUI/GAUI etc.
• Strong programming/scripting skills coding languages such as Python, C/C++, TCL for firmware development, test methodology development and test automation
• Extensive experience with common lab equipment, including BERT, analyzers, oscilloscopes, PNA/VNA etc
• Knowledge of SerDes general architectures and link level system analysis
• Good understanding in transmission line theory and electromagnetic theory
• Experience in system level serial link analysis and simulation, system performance optimization and standard/architecture level study using tools such as Matlab, ADS etc.

ACADEMIC CREDENTIALS:

• Bachelors/Masters degree in Electrical/Electronics Engineering

LOCATION:

Singapore

On your day to day:

• Handle multiple projects and provide network design and deployment support from project initiation to closure.
• Follow Citi network standards and configuration templates to prepare Network Design Documents (NDD) and submit for review and approval. Create Build Packages that includes implementation plans, test plans and network changes.
• Oversee the deployment of Build Packages on the corporate data network. Implement network changes during the allowed weekend green zone window.
• For some large/complex projects, you will be required to represent network domain in a virtual team and effectively communicate and liaise with business/technical stream owners.
• Assist with knowledge transfer of new products to internal teams.
• Assist in the development of & implementation of processes to allow repeatable designs with the view of provisioning automation and efficiencies.
• Prepare and submit all required project documentations for audit purpose & project closure

Qualifications:

• Proven experience (5+ years) working with Cisco and Arista network devices (routers and switches).
• Minimum of at least CCNP or equivalent.
• Strong working knowledge of following routing protocols: BGP, OSPF.
• Experience on WAN technology, e.g. Metro Ethernet, MPLS. VPLS, IPLC etc.
• Preferable with working experience on using Multicast in a Cisco/Arista environment.
• Preferable with working experience in large financial or banking network operation/implementation team.
• Ability to effectively communicate to internal clients through all available mediums (verbal, listening, writing, presenting).
• Willing to work during weekends for implementation of network changes.
• Willing to work for extended working hours when needed.
• PC Literate (Word, Excel, PowerPoint)

Join our global team to help design, implement, improve, and operate our worldwide Internet Breakouts as well as the VPN Services for Bosch Users and partners. Ensure that the security infrastructure deployment and configurations align with industry standards, compliance requirements, and organizational security policies. Provide Level-2/Level-3 Support for our service portfolio, including shared on-call duty (remote). Collaborate closely with our Architects, Engineers, internal customers, partners, and stakeholders. Initiate, manage, and implement changes to our security infrastructure.

Responsibilities:

• Design, implement, and operate worldwide Internet Breakouts and VPN Services for Bosch Users and partners.
• Ensure security infrastructure deployments and configurations comply with industry standards, organizational policies, and compliance requirements.
• Provide Level-2 and Level-3 support for the service portfolio, including participation in shared on-call duty (remote).
• Work closely with Architects, Engineers, internal customers, partners, and stakeholders.
• Initiate, manage, and implement changes to the security infrastructure.

Job Description

• Contribute to Life Science projects for Antaes Asia clients
• Review and familiarize with Automation systems used on site.
• Execute and review SAT protocol/reports.
• Assist Automation Engineer in commissioning.
• Support Engineers in documentation (SOPs, Work Instructions, Risk Assessments etc).
• Assist Engineers in creating and reviewing maintenance procedures / maintenance plans.
• Support Automation System PQ.
• Provides trouble shooting / continuous improvements to processes / systems. Maintain high GMP standard meeting the regulatory expectations such that the site is always inspection ready.
• Monitor and enforce compliance measures (including Data Integrity and safety) within their specific discipline to ensure inspection readiness of plant, as well as participate as an audit team member in the conduct of audits.
• Monitor and manage the DCS/PLC systems to ensure constant and reliable support to the plant at all times so as to minimize disruption to the production process.
• Contribute to the promotion of Antaes services on top of assistance provided to clients

Requirements

• 5-10 years’ experience as Pharma Engineer with Controls experience in the process / pharmaceutical industry
• Experience in Delta V system, especially batch process.
• Experience in SIL calculation and TMR system (Honeywell Safety Manager) will be added advantage.
• Experience in the Siemen PLC system will be added advantage.
• Good understanding of validation process, calibration and preventive maintenance.
• Familiar and understanding of Global Engineering Standard (GES) and understanding of industrial standards.
• Effective communication & Operational Excellence skills.
• Show high level of initiatives.
• Knowledge in Alarm management system, LCS ( Local Control Station ) with push buttons, selector switch, ammeter, voltmeter and emergency stop. FRP enclosure with ingress protection, PEMS (Portable Emissions Measurement Systems), Building management system, Urgency system & Commission automation system

The successful candidate will be onboarded in the Platform and Cloud Hosting team which:

• Deploys, supports and maintains global Private Cloud infrastructure (compute, storage, software defined network, etc.)
• Advises internal partners on how to leverage the Cloud – Private or Public – to increase the delivery of business value
• Guide and assist our application team to adopt our cloud native technologies
• Work closely with regional and global teams to support on the platform

Job Description:

• Contribute to projects for Antaes Asia clients
• Install, configure and support cloud platform underlying resource plane and control plane infrastructure (hardware and software components)
• Releasing projects and maintenance operations in production without impact
• Be a technical reference for internal partners and advise on standard Cloud practices or innovative solutions to bring value to a competitive and challenging market environment
• Structure and guide our internal partners through their Cloud-Journey, accelerate the adoption of Cloud technologies and best practices, and provide consolidated reporting across the organization
• Create technical content such as reference apps, starter kits and patterns and practical guidance that will get our developers excited about the potential of the Cloud
• Represent the team in various regional and global forums where technical expertise is required
• Be a technical reference and mentor for the team to increase their knowledge about software development & cloud patterns
• Contribute to the promotion of Antaes services on top of assistance provided to clients

Job Requirements:

• Bachelor’s degree in Computer Science, Computer Engineering or equivalent
• Passionate about learning new technologies, sharing knowledge, and solving complex challenges
• Strong automation mindset with little tolerance for repetitive work.
• Fluent English is mandatory and excellent communication is a must
• Strong experience with Linux-based Operating System, OpenStack, CEPH, Docker
• Experience with commodity hardware (Dell, HPE, etc.)
• Experience with Kubernetes (or other container technologies) and Databases (PgSQL, NoSQL, etc.)
• Experience with Object Storage (Scality, EMC ECS, etc.), File and Block Storage (Pure, NetApp, EMC, etc.)
• Hands-on experience with Infrastructure automation through CI/CD, DevOps tooling like Python, Puppet, Ansible, Terraform, Git, Github Actions, etc.
• Knowledge in Public Cloud CPs is a plus (Azure, AWS, etc.)
• Exposure to and interest in Cloud technologies
• Well organized, self-motivated, enthusiastic, fast learning, growth mindset
• Team Player and Collaborator with excellent communication skills

As a fast-paced, growing business; this role will be responsible for significantly contributing to projects to deliver excellent service levels to clients and assist in the ongoing development and growth of the business, whilst providing sound technical, design and contract management support.

They should comply with B&W Engineering’s standards, procedures, process and implementations to ensure project requirements and clients’ specifications are fully met. Have the ability to demonstrate extensive experience in a wide range of technical areas and have a sound level of knowledge at Senior Engineer level.

Desirable experience would include the management of Data Centre projects..

Role Responsibilities and Requirements

Degree or higher in appropriate engineering discipline or have sufficient equivalent experience.

IES Electrical and Electronics Engineering Professional Membership desirable.

Singapore Professional Engineer registration or progress towards beneficial.

Proven experience in working within and running projects within a multi-disciplinary team with the successful delivery of the design for critical projects.

Experience in project management and MEP engineering track record with some experience of data centres or other critical engineering facilities.

Knowledge of MS Office applications Outlook, word, excel, PowerPoint etc

Knowledge of Dialux, Trimble (Amtech) Etap /AutoCAD/Revit/ BIM/CAD calculation software.

Ability to use IT based calculation and spreadsheet software.

Significant experience in production of drawings, calculations, schedules & specifications for a range of building types

At least 5 years overall experience with 3 years Data Centre design

Broad design experience across Commercial, High Rise, Hotels & Leisure would be beneficial

Demonstrate a thorough understanding of the design process.

Peripheral experience in architecture, structures, civils, security and permitting.

Excellent understanding of the various code requirements and standards across the APAC region.

Sound knowledge of key Health and Safety issues and legislation including Singapore Design for Safety (Dfs)

Ability to keep clear and accurate records and reports.

Understand and maintain the long-term goals of the business.

Understand the company QA process, maintain and contribute to the same standards across the APAC region

Ability to work autonomously, as part of a wider team.

Ability to embrace an intensively collaborative design environment working for and reporting daily to an expert client.

Ability to proactively step outside the role of conventional design regiment and stages to achieve the client’s deliverables.

Flexible and willing to travel to service international projects and customers.

Possess exceptional clear communication skills and command of spoken/written English.

Have an appreciation of different cultures/races and embrace the same.

Be a motivated, highly dependable

Maintain an appropriate knowledge of industry initiatives.

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Prepare, check/review, approve conceptual studies, designs and detailed project drawings, proposals, design criteria & specifications, project budget and schedules

Prepare quantity take-offs, cost estimates and staffing forecast for all phases of project and manage change orders

Deliver project adhering to quality norms, timescale and budget

Supervise, guide and mentor the project team and provide input for their performance evaluation

Support creation of a work environment that fosters openness, trust, communication, teamwork, empowerment, innovation, and satisfaction

Provide technical leadership and invest in developing capabilities of the team members

In-depth knowledge of road alignment, geometric design, junctions, roundabouts and interchanges and flexible/ rigid pavement design

Exposure to traffic engineering will be an added advantage

Prepares or assists in preparation of conceptual studies, designs, reports or proposals, design criteria, specifications, budget and schedules for projects of varying complexity

Perform the finite element modeling and structural analysis of various steel and concrete structures

Establish, track, and monitor material key quantities

Develop and update job execution plans

Develop and build external relations with client representatives, vendors, and subcontractors and interface closely with other discipline functions promoting Client Service Excellence

Review and approve vendor lists, prepare quotation requests/bid tabulations/purchase orders and review substitutions for technical acceptability

Establish and lead the squad check effort for vendor equipment documentation for assigned equipment

Support proposal and estimate activities

Execute project work in accordance with approved Activity Plans

Engage Fluor’s global community, promoting a OneFluor mindset

Monitor and support work performed by Fluor offices or other designated entities performing Distributed Execution Engineering

Direct and oversee audits

Create system and equipment designs that meet our customer contractual requirements and location specific codes and standards including, but not limited to ASME/ANSI, IBC, UBC, CSA, European Union Directives

Adhere to industry codes and standards department practices and procedures

Provide Engineering input to drafting team members to support creation of design drawings, bills of material (“BOM”s) and other design documentation

Review and approve completed design drawings and BOMs prior to issuance

Lead internal and supplier design reviews

Apply lean 6-sigma tools and methods to achieve cost effective, balanced designs

Perform mechanical, structural, or civil analysis as necessary to support new designs or improvements to existing designs

Drive effective solutions for emergent issues, with appropriate sense of urgency

Ensure timely completion of engineering activities within schedule objectives that meet internal and customer needs

Create new designs that meet safety, reliability, performance, maintainability, and cost objectives

Provide engineering inputs and solutions during all phases of design development and project implementation

Provide ad-hoc expertise during project execution to mitigate risks and generate opportunities

Initiate and or participate to Interface, co- engineering Meetings, design freeze sessions with other Team Members

Control and monitor design changes and design budget deviation

Report to Program Element Description (PED) and Civil Works (CW) Project Management (PM) during the course of the project

Preparing cost estimates, permit applications, plans and specifications, feasibility studies, and other technical reports

Managing field teams that are overseeing the collection of field samples (soil, groundwater, soil vapor, air), remediation pilot testing, construction oversight, and operation and maintenance of remediation equipment

Be focused on ensuring designs are delivered in compliance with client specifications and to the agreed programme and budget.

Execution of engineering & design works within budget and schedule

Working as Client Representative within a multi-disciplinary team, for supervision of the construction works which are being carried out under lump sum contracts

Lead and manage technical design processes on multi-disciplinary projects

Plan, monitor and supervise work of other engineers

Prepare technical reports, tender documents, bill of quantities, evaluate technical bids & reviews vendor/third party documents

Participate in Client and Contractor facing technical and progress meetings

Coordinate with the Client and Contractor and particular focus on liaising with relevant Authorities and overseeing wayleave applications

Co-ordination with other disciplines to resolve engineering issues during design development, review and check processes - to ensure design packages meet the relevant health, safety and environmental standards

Discussions with support engineers and designers regularly on scope, man-hours and schedule

Participate in the technical reviews and progress review of projects.

Undertaking civil engineering design, review and project management for a wide range of projects including land development, high density retail and other civil infrastructure

Commercial project delivery of a range of projects ensuring timeframes and budgets are met

Provision of specialist design and reporting expertise within a multi-disciplinary office

Management of client relationships on allocated projects including developers and contractors

Tertiary qualifications in Civil Engineering coupled with at least five years' experience within a consulting environment

Significant experience within the NSW market, ideally within the residential and commercial land development sector

Well-developed interpersonal skills to develop, maintain and enhance client relationships

Undertaking civil engineering design, review and project management for a wide range of projects including land development, road infrastructure, high density retail and other civil infrastructure

Manage a team of engineers / designers / drafters

Ability to communicate confidently and professionally with all levels of staff and clients

Technical management of junior staff

Undertake design reviews and checking

Be self-motivated and able to work both independently and as part of teams

The ability to work to time and cost budgets

A willingness to work with Clients and their project teams

Identify and input to activities in support of the wider business objectives that may draw upon skills in addition to those outlined above

Support Team Leader in work winning including representing the business at networking evets, preparing bids and tenders and establish, maintain and develop relationships with existing and prospective internal and external clients.

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

Responsibilities

• Manage daily network operations related to switches, routers, firewall and VPN to ensure optimal performance, reliability and security
• Install, configure and support network equipment including routers, proxy servers, switches, WAN accelerators, DNS and DHCP servers
• Support the deployment and management of Cisco SD-WAN solutions to optimise network traffic and enhance connectivity
• Monitor and troubleshoot network, arranging scheduled updates
• Report network status and performance metrics to key stakeholders including senior management during incidents
• Coordinate with vendors and support vendor-related activities
• Configure Palo Alto firewall rules to enforce network security policies
• Configure Cisco wireless solutions to ensure reliable connectivity and coverage
• Contribute to automation and continuous improvement process

Requirements

• Eligible to work in Singapore without requiring work pass support i.e. Open to Singaporeans and/or Singapore Permanent Residents due to nature of role
• Degree in a relevant field
• At least 5 years progressive experience in network support and configuration role
• Hands-on experience in the following:

Network routing and switching using Cisco products

Palo-Alto and Cisco ASA firewalls

Meraki

SD-WAN

Z-Scaler VPN

Preferred Requirements

• CCNP-certified

This is an individual contributor role in a team of 8.

Responsibilities

• Maintain and support Agile products, which include:
• Support application changes that might impact existing functionalities and processes or involve new features altogether
• Maintain and upgrade product tech stack
• Provide solutions or workarounds with regards to existing functionalities
• Answer functional queries e.g. how to use them
• Test and release management
• Participate in users’ training
• Provide audit and security review support

Requirements

• Degree holder
• At least 5 consecutive years in roles of similar capacity working with various language stacks focusing on ReactJS and NodeJS
• Familiarity with cloud-based technologies and architectures (AWS, Azure or GCP)
• Proven expertise with web and mobile application and related architectures, and concepts e.g. security, microservices

Preferred Requirements

• Previous roles held in banks and/or financial institutions
• Hands-on experience in AWS, CI/CD, Dockers e.g. Git, Git flow, trunk-based development
• Understanding of containers and associated tools in the orchestration and monitoring space including but not limited to Kubernetes, Terraform, Prometheus, Kibana and Grafana

Job Summary

We seek an experienced and motivated Senior Software Quality Engineer to join our forward-thinking tech team. In this role, you'll ensure our platform is reliable and meets high-quality standards. This position allows you to work across teams, shaping and implementing advanced QA processes that support scalable, reliable, and innovative solutions.

Responsibilities:

Test Strategy and Planning

- Define and lead comprehensive QA strategies, covering all phases of the software development lifecycle.

- Develop, manage, and execute manual and automated test plans, cases, and scripts to ensure thorough testing.

Automation and Tooling

- Lead the development of automated testing frameworks using Cypress, Playwright or any automation tool for end-to-end test coverage.

- Drive platform scalability by implementing performance and load tests using tools like Gatling, K6, or Jmeter.

Quality Assurance

- Perform contract testing to ensure smooth interaction between microservices.

- Lead regression testing efforts for bug fixes and new features to maintain overall quality.

- Oversee the end-to-end testing pipeline, resolving issues promptly to avoid any delays.

Cross-Functional Collaboration

- Work closely with product managers, developers, and DevOps engineers to meet project requirements and deliver high-quality software.

- Contribute to agile team processes, including sprint planning and other ceremonies, with valuable QA insights.

- Coordinate with QE teammates to prepare and lead weekly deployments, ensuring smooth execution.

Issue Resolution and Reporting

- Accurately document, track, and report software defects, conducting root cause analysis as needed.

- Provide timely and detailed reports on QA activities, testing outcomes, and relevant quality metrics.

Mentorship and Leadership

- Mentor junior QA engineers, building a strong team culture focused on quality and continuous improvement.

- Stay up-to-date with emerging QA tools and methods, bringing new ideas to the team.

Job Requirements :

- Expertise in software quality assurance, with a strong focus on automation testing (e.g., Cypress, Playwright).

- Demonstrated experience with performance testing tools such as Gatling and Autocannon.

- Proficient in JavaScript (TypeScript) or Java

- Familiar with frontend and backend technologies (e.g., ReactJS, ExpressJS, Gin-gonic), as well as cloud platforms (AWS, Docker, Kubernetes).

- Knowledgeable in CI/CD tools (e.g., GitLab, ArgoCD) and relational databases (MySQL, PostgreSQL).

- Solid understanding of REST and GraphQL APIs, JWT for authentication, and search technologies like Elasticsearch.

- Exposure to additional testing tools and caching systems like Redis.

- Experience with logging and monitoring platforms such as Splunk or OpenSearch

Qualifications:

- Bachelor’s degree

- Strong problem-solving, analytical, and communication skills.

- Demonstrated leadership skills and comfort working in a fast-paced, agile environment.

Responsibilities

· Understand customer demands, challenges, and objectives through assessments, information gathering and Customers, technology/industrial engagements

· Collaboration with sales & business development, product & engineering stakeholders including analyse and selection of appropriate hardware, software, and services to create the winning solution offering to customer and markets

· Developing detailed proposals, presentations, and technical documentation that outline the proposed solutions, including features, benefits, and pricing. Presenting these proposals to customers in a clear and compelling manner

· Preparation and conduct of product and solution exhibitions, demonstrations and proof-of-concept activities to showcase the capabilities and address any technical questions or concerns from customers

· Providing technical expertise and support to business development & sales team throughout the sales cycle, including participating in customer meetings, responding to technical queries, and contributing to the development of sales strategies

· Building and maintaining relationships with technology vendors and partners to stay informed about the latest products, technologies, and industry trends. This includes evaluating new solutions and incorporating them into proposed designs

· Keeping up-to-date with advancements in communication technologies, industry standards, and best practices. Pursuing opportunities to enhance technical skills and knowledge

Requirements

· Degree in Electrical/Electronics/Communications Engineering

• Minimum 5 years’ experience in Communications/Telecommunications/Infosystems Solutions Engineering and Implementations, supporting as a Pre-Sales capacity

· Strong understanding of communications technology

· Able to follow up closely with customers in order to answer to their needs

· Working location is in Jurong East

· Singaporeans Only

Please submit resumes to [email protected]

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

*Join Our Team: Outdoor Service Engineer*

Are you a tech-savvy problem solver with a passion for the great outdoors? AV Media Pte Ltd is seeking an enthusiastic and skilled Outdoor Service Engineer to join our dynamic team.

*About Us:*

AV Media Pte Ltd is a leading provider of audiovisual solutions, serving prestigious clients including MOE schools and various government agencies. We pride ourselves on delivering top-notch services and innovative solutions.

*Position: Outdoor Service Engineer*

*Key Responsibilities:*

- Provide maintenance and support for audiovisual equipment at client locations.

- Troubleshoot and resolve technical issues efficiently and effectively.

- Ensure customer satisfaction by delivering excellent service.

- Collaborate with the team to improve service quality.

*Requirements:*

- Technical diploma or equivalent in a related field.

- Experience in audiovisual equipment maintenance and troubleshooting.

- Strong problem-solving skills and attention to detail.

- Excellent communication and interpersonal skills.

- Ability to work independently and manage time effectively.

- Valid driver's license.

*Benefits:*

- 5-day work week.

- Company-provided vehicle for service visits.

- Comprehensive training program.

- Attractive salary and benefits package.

- Opportunity to work with prestigious clients and advance your career.

*How to Apply:*

If you’re ready to take on an exciting challenge and be part of a forward-thinking company, send your resume and a cover letter to [email protected] with the subject line "Application for Outdoor Service Engineer."

Join us in making a difference through cutting-edge audiovisual solutions!

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Controls Engineer (PLC)
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for assisting the design of controls system and programming coding to meet the budget and time expectations as defined by the Project Manager.
• Modify controls design and other documents according to the compliance with industry standards according to customer URS.
• Develop specific program per customer and project requirements based on Company's Coding Standard.
• Participate in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.
• Work together with the Customer, Project Manager, Assistant Project Manager, Process Manager, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Collaborate with suppliers as needed.
• Update PCT and task completion accordingly.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience with controls systems and programming
• Knowledge of Allen Bradley and Siemens-S7 programming

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69404 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturer – Metal Stamping
• Position Title: Principal Tooling Engineer /Principal Engineer – Tool & Die
• Working Location: West (Transport provided at Boon Lay/Pioneer)
• Working Hours: 5 days (Mon – Fri, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $6000 + AWS Variable Bonus + $30 Mobile Claim
• Duration: Permanent Role

Key Responsibilities

• To lead the tooling team in problem-solving, identifying issues, and conducting root cause analysis.
• Analyze and improve stamping processes for cost reduction and quality enhancement.
• Investigate technical issues and analyze defects.
• Provide technical support to Sales and ensure tooling feasibility for customers.
• Lead cross-functional teams to streamline operations, reduce cycle times, and cut down on waste.
• Manage all documentation to comply with ISO9001, IATF16949, ISO14001, and ISO13485 standards.
• Enforce safety protocols and ensure a safe working environment while complying with industry standards.
• Develop and implement preventive maintenance plans to prolong tool life and reduce downtime.
• Promote a culture of continuous improvement using Lean Manufacturing and Six Sigma methods.
• Regularly monitor and report on key performance indicators (KPIs).
• Maintain detailed records of all tooling modifications and maintenance.
• Collaborate with Production, NPI, Quality Control, and Operations teams to optimize tooling effectiveness.
• Handle additional responsibilities as assigned by management.

APPLY NOW!!!

• At least 3 years of relevant experience.
• Minimum Diploma in Precision Engineering or equivalent technical qualification in Tool and Die making required.
• Strong commitment to safety and regulatory compliance.
• Proficient in Lean Manufacturing and process optimization.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69620 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

This position assists staff with technical support or desktop/laptop computers, applications, printers and related technologies.

Responsibilities:

• Assists staff with installation, configuration and ongoing usability of computers and peripherals within established standards and guidelines.
• Works with vendor support contacts to resolve technical problems.
• Works with service desk and RDS as appropriate to determine and resolve problems received from clients.
• Responds to support requests from service desk, users and other infrastructure teams.
• Performs upgrades as directed to ensure the longevity of equipment.
• Keep track of request and make sure they are implemented as planned.
• Participate in incident handling concerning desktop changes.
• Participate in projects concerning bigger desktop changes, for example rollout of new antivirus.
• Microsoft environment knowledge (desktop & server).
• Ensures that computers connect seamlessly with diverse systems including validation systems, file servers, email servers, application servers and administrative systems.
• Provide weekly reports.
• Implement best practices.
• Be the single point of contact with customer.

Requirements:

• Bachelor’s degree / Diploma in Engineering, Computer Science, Management Information Systems, or related field.
• Minimum 5+ years of experience from the desktop environment.
• Have some level of technical understanding of the products building up a desktop service.
• Exposure on managing remote sites.
• Phone support experience necessary.
• Technical helpdesk or technical call center experience is necessary.
• Disciplined, systematic problem solving skills required.
• Windows and Novell Operating systems.
• Clients: Windows7, Windows Vista, Windows XP, Windows 2000.
• Servers: Windows 2000, Windows 2003, Windows 2008.
• Knowledge of Active Directory, Novell eDirectory, Lotus Notes and Exchange 2003/2007.
• ITSM ticketing tools such as Remedy, HP Service Center, Peregrine Service Center.
• Remote desktop connectivity applications like SMS, Bomgar, WebEx, Live Meeting, and Windows Native tools.
• MS Office Suite (XP, 2003, 2007): MS-Word, MS-Excel, MS-PowerPoint, MS-Outlook, MS Project, and MS Visio.
• Internet browsers (e.g. Explorer, Chrome, Firefox).
• VPN and remote dial-in users.
• Support for laptop, desktops, AV Devices and printers.
• PDA and blackberry support.
• Apple Ipad Device support.
• Others: Adobe Acrobat and other common desktop applications like Winzip, etc.

Roles & Responsibilities:

• Establishing work procedures, instructions and monitor performance and control of workmanship towards quality.
• Ensure sub-contractors and suppliers comply with project’s QA/QC requirement and manage project quality to ensure compliance to codes, standards and regulations.
• Carry out audit processes, review procedures, and ensure compliance with industry standards.
• Carry out various inspections and tests on the materials, products and components during various stages and completion of construction.
• Identify areas for process improvements, implement best practices and ensuring ongoing compliance.
• Maintain records of inspection results, deviations and corrective actions taken to ensure traceability and accountability.
• Initiate corrective actions to resolve the issue and prevent recurrence when defects or non-conformities are found.
• Review client’s complaints relating to QA/QC matters.
• Preparing and maintaining detailed reports on quality performance.

Requirements:

• ITE / Diploma in engineering or equivalent.
• At least 5 years of working experience in the local construction industry.
• Good communication and interpersonal skills.