• Responsible for the operation and maintenance of new wind farm/storage SCADA (Supervisory control and data acquisition) software system, maintaining SCADA system stability and solving SCADA system issues
• Responsible for collecting customer issues and requirements, handling or coordinating relevant parties to follow-up
• Responsible for checking new projects' delivery quality when handover from delivery team
• Responsible for summarizing projects' issues and generating reports weekly or monthly
  
  Job requirements
• Majors in electrical engineering, automation, computer etc., experience in relay protection, wind power or photovoltaic or SCADA system debugging is preferred;
• Familiar with communication protocols such as Modbus and IEC104, be able to handle common communication issues independently
• Familiar with Linux commands and basic network knowledge, experience in physical server and gateways is preferred
• Good communication and coordination skills, able to independently connect with customer, project management experience is preferred
• Having a strong sense of responsibility and a certain ability to handle pressure
• Domestic and international (asia) travel (40% of time).

Responsibilities

• Daily Update of Project / Operation Progress to immediate superior.

• To have and maintain good daily attendance and punctuality.

• To update team member at least 2 working days in advance before going for leave , in order to minimize downtime.

• Ensure to know project scope of works and meet the client’s needs as per project standard and requirements.

• Supervise and oversee the sequential activities of Structural, Piping &

Mechanical Equipment (SMP) Installation such as Receiving, Locating in

the lay down, Preservation, Foundation and Structure, Receiving from

Main Contractor/Suppliers/Vendors, Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement, Touch up Painting and Hand Over.

• Must have working knowledge of all applicable piping and structure

standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.

• Managing project scope and change control with commercial or without commercial impact.

• Development of procedures, flowchart or process flow, detailed calculation based on available Engineering information.

• To procure and requisition materials based on interpret construction and technical drawings.

• Communicate with Engineering/technical/quality requirement to team individuals.

• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance. Departments & Subcontractors and interfaces with other REL' s Business Units.

• Working closely with main contractor and client to ensure the project

meets the required needs.

• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.

• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritize from Pre-Fabrication required (e.g.

PTREI and Subcontractors).

• Preparation of method of statement, risk assessments for Piping,

Mechanical & Steel Structure Scopes.

• Monitoring and installation supervision with Subordinates to deliver the projects in Safety, Quality and Production manners.

• To liaise with clients representative on all project issues and

subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.

• Leading the supervisors and foremen in finding and executing solutions to SMP related problems on site.

• Communicating with Project Management Team / QAQC Team to validate and document all changes and highlight to PM for changes that shall involve additional works.

• Assist with the management of internal and external third party interfaces.

• Monitoring and assist of site construction team for Installation, Testing and Pre-Commissioning works related to SMP Scopes.

• Liaise with respective functions or Bu's to prepare project planning,

contracts, procurement, progress reports and claims.

• Timely Setting out the target, plan and accurate achievement including manpower, materials and machineries as per scope and budget.

• To outsource the Shop-Prefab for Piping and Steel Structure Scope, Shop and Field Painting, Galvanising, Metal Roofing, Shop drawings (TEKLA),etc.

• Able to have understanding of systems and subsystems of the plant in order to expediously complete and handover to Client.

• To take note the Variation order (VO) and to take note of any Notice of Delay (NOD) during execution of the project.

• Nominating and training of supervisors, foremen, fitters, welders and

general workers to be capable of doing works well.

• To initiate and undertake action to prevent the occurrence of nonconformity.

• Promote best practice for Safety, Quality and Productivity.

• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

• To consider HSE aspects when planning and carrying out tasks to

eliminate and reduce HSE hazards, aspects and risks.

Requirements

• Preferably bachelor’s degree in engineering or relevant Pre-U/ A level/

College/ Diploma/ Advanced/ Higher/ Graduate Diploma/ Office Skill

Certificate or equivalent

• Preferably computer literate in MS Office Word, Excel and PowerPoint

• Preferably minimum 3 years’ experience of in oil and gas industry or related field

• Good oral and written communication skills in English

• Positive attitude with good interpersonal skills, excellent problem-solving skills backed by solid technical knowledge

• Ability to work in a dynamic and fast paced environment.

• Able to complete tasks with little or no supervision.

• Motivated Team player

Responsibility

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

Design and build the DWH database models (star schema).

Manage the semantic model in Oracle Analytics Cloud to provide a unified view of our organization's data.

Manage application roles and access rights for end users including row level security filters, to protect sensitive data.

Work with ETL specialists, IT business Consulting as well as external vendors to ensure data ingestion and integration into the database model

Collaborate with Business Controlling and business counterparts on new reporting requirements.

Ensure data quality, security and compliance with industry standards and internal guidelines.

Ensure proper documentation of data infrastructure, data models, workflows as well as security concepts in accordance with internal security policies.

Skills

Looking for a Data Engineer more focused on Database modelling, Currently in Oracle environment and going forward with GCP stack.

Proficiency in SQL and data warehousing

Strong understanding of data modelling techniques and hands on experience building database models (star schema).

Expertise with ETL (extract, transform, load) processes. Familiarity with BI tool integration such as Tableau or Looker

Strong analytical thinking, problem-solving capability, and ability to translate business needs into technical specifications.

Customer-oriented with good communication and interpersonal skills.

1. Degree in Building/Construction Studies/Civil & Structural Engineering/Geological Science or equivalent

2. Ensure full adherence to company policies on-site, particularly health and safety standards

3. Able to manage and control workers and monitor their work closely

4. Attend project site meetings with the clients, consultants, sub-contractors, suppliers, authorities, etc. and to ensure the smooth progress of the project

5. Supervise the collection of soil and rock samples and instrument installation works

6. Prepare reports from fieldwork eg. Borelogs, installation records and daily journals

7. Co-ordinating with materials suppliers and managing the delivery, quality and installation of materials

• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

Responsibilities

· Analysing project specifications, developing work schedules, and delegating tasks to different teams.

· Ensuring that each project stays within the allocated budget and timeframe.

· Determines project specifications by studying product design, customer requirements, and performance standards.

· Determines project schedule by studying project plan and specifications, calculates time requirements, sequences project elements

· Maintains project schedule by monitoring project progress, coordinating activities, and resolving problems

· Prepares project status reports by collecting, analysing, and summarizing information and trends and recommending actions

· Maintains a safe and clean working environment by enforcing procedures, rules, and regulations

· Preparing, scheduling, co-ordinating and monitoring the assigned engineering projects

· Monitoring compliance to applicable codes, practices, QA/QC policies, performance standards and specification.

· Interact daily with the clients to interpret their needs and requirements and represent them in the field

· Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status

· Assign responsibilities and mentor project team

· Cooperate and communicate effectively with project manager and other project participants to aid and technical support

· Review engineering deliverables and initiate appropriate corrective actions.

Reuirements:

Maintains & assists PM with preparation of Weekly Project Update accurately and on time

Reviews project documents & creates RFIs in a timely manner

Maintains and updates RFI Log

Actively assists project superintendent with enforcement of site safety

Can identify quality issues in the field and communicate them accordingly

Assists in preparation and implementation of Project Execution Plan (PEP).

• Attends the Weekly Progress Meetings (Internal as well as with Client and consultant).

• Monitors work in progress and prepares weekly report of the status of each assignment.

• Ensuring all procedures and calculations are submitted to the client for review and approval.

• Coordinates materials and assists in the logistics, its shipment and receipt at construction site.

• Coordinates with all projects related personnel (onshore and offshore) on day-today progress of work activities, procurement and operations to ensure timely completion of the project.

• Provide full support as required by the Management and PMT for all projects.

skills

• Proven working experience as a M&E Engineer/Supervisor
• Excellent knowledge of design and visualisations software such as AutoCAD/BIM
• Advanced MS Office skills
• Familiarity with rules, regulations, best practices, and performance standards
• Ability to work with multiple discipline projects
• Decision making ability and leadership skills.

This candidate will responsible for the development of IOT products and its full product cycle from research to production. He/she will be in a team of different expertise to research, design and develop the product with cooperation from various external vendors/suppliers.

Responsibilities

· Design electronics including schematics and PCB layout for various new and legacy product

· Research and Source for components, equipment and tools related to new Product

· Collaborate with external vendors/suppliers to inspect and determine suitable components

· Build and assemble prototypes and troubleshoot issues

· Support firmware design and optimize development of the product

· Support electronics issue in product manufacturing

· Formulate test method and collaborate with engineers/technician to perform them

· Documenting development process and design at every product cycle.

· Any other duties as may be assigned.

Requirements

· Diploma or Degree in Mechatronics, Electronics, Robotics, Embedded systems or related fields

· No experience needed

· Firm grasp of Electronics design is a must

· Knowledge of Microcontroller and Microprocessor is a plus

· Knowledge of C/C++ is a plus

· Outstanding analytical and problem-solving skills

· Able to start work within short notice will be an advantage

Technical Sales for Precision Engineering

1 to 2 years sales experience in Engineering Products

Engineering Products examples: Bearings, Linear Guides, Actuators, Linear Motors, Gantries etc

Industries: Semiconductor, Biotech, Renewable energy

Use of Microsoft Office and ERP, CRM will be good

Willing to travel if required

Positive attitude, ability to interact with both internal and external parties

Ability to learn quickly, and problem solve if required

Responsibilities:

• Install, configure, and maintain server operating systems (Windows/Linux/VMWare)
• Deploy, configure, manage, and troubleshoot the following software/hardware - Active Directory, Exchange Server & Exchange Online, VMware ESXi, SAN Storage & Backup
• Perform routine system administration duties
• Monitor servers and troubleshoot issues
• Provide additional support when necessary (eg. backup and storage functions)
• Perform proper documents for all processes
• Recommend solutions and ensure all IT issues have been corrected, and maintain records of work performed
• Provide technical support across the company, including Singapore, regional offices, and retail stores
• Provide technical support to server and network infrastructure and perform regular upgrades to ensure systems remain updated
• Troubleshoot system failures or bugs, and provide solutions to restore functionality
• Assist with any ad-hoc tasks as assigned

Requirements:

• Minimum Diploma in Computer Science, Information Technology, or a similar field
• At least 2-3 years of working experience in the related field
• Experience in configuring, monitoring, and troubleshooting systems
• Able to communicate effectively in both oral and written aspects
• Able to work independently and in a team
• Possesses analytical skills and works well in a fast-paced environment

Our client, a well-known company, is looking for candidates for the position of Associate Engineer.

Responsibilities:

1. Supporting the production line
2. Ensuring the machines are running smoothly
3. Basic troubleshooting and housekeeping maintenance
4. Other ad-hoc duties

Requirements:

• Candidates must possess a diploma in any engineering related field
• Candidates must be comfortable with a standing job

​​​​​​​
Thank you for your application but we regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No. 01C4394

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

• At least 5 years working experience

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Roles & Responsibilities:

• Lead and manage a team of technicians & operators to operate waste/wastewater treatment plant
• Supervise and perform day-to-day operation following the SOP, Work-Place Safety EHS rules and regulations
• Responsible for planning, programming and monitoring of work progress on site
• Prevent, identify, and solve process and plant problems
• Maintain proper material inventory and records of the treatment plant operation parameters and feedstock and product properties
• Carry out routine plant maintenance as instructed
• Prepare operation and incident report for any accident, near miss or unusual incident/observation
• Coordinate with contractors and suppliers for their services and monitor their works
• Any other works assigned by supervisor

Requirements & Qualifications:

• Diploma/Degree in Mechanical/Environmental or other related Engineering major from a recognized polytechnic/university
• Proficient in Microsoft Office
• Ability to communicate effectively
• Able to work on night shift and weekends when needed
• Previous experience in waste/wastewater treatment plant is preferred
• Singapore driving license would be an advantage
• Able to use AutoCAD would be an advantage

· Customizes CMS database check sheets and allocation of check sheets based on latest engineering drawing revisions and punch list updates for mechanical/ electrical process/safety /HVAC discipline

· Prepares boundary drawings as per subsystem listing

· Prepares procedures/ work method statements and risk assessment for mechanical/electrical process/ safety/ HVAC commissioning activities

· Attends Factory Acceptance Test at vendors' premises, as required. (FAT)

· Leads a team of mechanical electrical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides

· Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability

· Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities

· Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner

· Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities,

· Able to travel oversea

· Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc

· Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures

· Reviews completed commissioning documentation such as check sheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.

· Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

· Ensure to maintain up to date punch close report

Requirements:

· Min. 3 years year of commissioning experience in the Oil & Gas/ marine industry.

· Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc

· Good knowledge and experience in commissioning activities of oil and gas/ marine facilities

· Familiar with permit-to-work systems and lock-out tag-out procedures

· Good analytical, problem solving and planning skills.

· Familiar with Project Specifications, Technical and HSE Standards

· Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.

· Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS---(Optional or added advantages)

Working hours：

Monday –Friday: 8:30am – 6:00pm (Transport provided from Jurong East MRT to Office)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Job Description:

• Responsible for supporting yield improvement, driving, and managing the continuous yield and quality improvement for various devices.
• Responsible for having close interaction with Product Test Engineering team and communicate technical product status to management.
• Responsible for following up with Foundries and test subcontractors to resolve low yield/reliability issues.
• Responsible for monitoring of parameter test and wafer sorting yield with in-depth analysis using various statistical data analysis tools and understand on semiconductor process knowledge, e.g., inline d0, ET, CPK etc.
• Develops failure analysis methodologies as required for assigned projects to enable rapid problem solving with support of internal and external parties.

Requirements:

• Degree/Master’s in Electrical Engineering, Microelectronics or related discipline.
• Strong analytical problem-solving skills.
• Capability of mass data analysis.
• Min 2 years of experience in Product Engineering.
• Salary package will be offered based on working experience.

Experience in the WOG environment.

• Setup and maintenance of desktops, laptops, phones, printers, peripherals and mobile devices – Windows and Apple Platforms

• Escalate and work with second or third level support/third party vendor on resolution of problem when necessary

• Maintain hardware inventory at assigned locations

• Provision new users with hardware, software and account setup

• Provide with both remote and onsite support for multiple locations, if required

• Troubleshoot and resolve a variety of technical problems

• Assist with network connectivity issues

• Provide great communication and customer service to company employees in person and through phone calls and emails

• Work on assigned tasks and projects including hardware and software rollouts

• Work with hardware / software vendors, whenever required

• Provide training when needed help facilitate users requests and in the implementation of company project

• Provide VPN support including end-user setup and problem

• Work closely with other support teams (client support team, application support team, server support team)

• Develop and document IT operational processes whenever required

• Manage Active Directory - User/ID creation, delete, reset, update, distribution, list/security and accesses

• Assist on AV setup in meeting rooms for conference calls and meetings

• Provide regular checks and maintenance on system health of the meeting rooms

• Provide back-end support for live event broadcast

• Support ad-hoc IT project deployments

• Attend meetings to update current projects

• Attend trainings provided by the company

• Perform procurement/RMA duties as and when required and liaise with vendors, keep track of orders and update users or IT team on delivery status

• IT Asset Management

We are seeking an experienced Engineer to join our Industrial Automation & Digitalization team for contorl panels. The ideal candidate will be responsible for the design and development of industrial automation control systems, ensuring high-quality project execution and client satisfaction.

Key Responsibilities

• Development and programming of PLC, SCADA, and HMI systems (preferably with Siemens, Rockwell, Wonderware/AVEVA).
• Experience in design and development of control panel and electrical architectures.
• Conduct Hardware and Software Factory Acceptance Tests (FAT).
• Perform testing, commissioning, and Site Acceptance Tests (SAT) at client locations.
• Provide technical support to the Sales team during project bidding.
• Offer onsite and remote technical support and services.
• Ensure overall quality control of all project deliverables.
• Collaborate effectively with team members and clients.
• Travel within Singapore internationally including offshore Oil & Gas facility as needed for project implementation and meetings.

Requirements:

• 3-6 years of hands-on experience in industrial automation & digitalization.
• Proficient in various communication protocols used in the automation industry.
• Strong knowledge of automation technologies specific to Pharma, Oil & Gas industries is an advantage.
• Strong verbal and written communication skills.
• Team player with a flexible approach to work and problem-solving and engage with other project team members in Singapore and overseas.
• Diploma or Degree in Electrical, Electronic, Computer, Mechatronic Engineering, or equivalent.
• A willingness to learn and a growth mindset.

Currently expanding our team in one of the fastest developing industry sectors, we are looking for an experienced and talented professional for the role of:

DevOps Engineer

Your Role:

• Work closely with Developers, QA and DevOps

• Configure, document, optimize and support the components of the DevOps infrastructure

• Design and develop the business’s infrastructure architecture

• Build automated deployments using configuration management technologies

• Provide support and maintain Production, Staging and Dev environments

• Conduct technology evaluations and research

Qualifications & Competences:

• Extensive hands-on experience with AWS infrastructure

• Strong background in Linux/Unix Administration, with a solid understanding of networking

• Knowledge of Docker and Kubernetes

• Experience organizing infrastructure and configuration as code using Ansible, CloudFormation, Terraform or equivalent

• Experience working with modern development pipelines using Bamboo, ArgoCD or similar tools

• Proficiency in code and scripting languages (Bash, Python)

• Ability to design systems from scratch and integrate components into existing designs

Considered as a plus:

• Working knowledge and experience running PostgreSQL and/or MySQL databases in production, including basic installation, configuration and backup-restore operations

• Experience with Kafka, Redis, MongoDB

• Experience with OpenSearch (ELK)

Our Technical stack:
AWS,Terraform, Kubernetes (EKS), Docker, ArgoCD, Kustomize, Sealed Secrets, CloudFormation, Ansible (AWX), Linux, Windows (10% of infrastructure), Applications on Java and JavaScript, Postgresql, Mysql, Influxdb, Mongodb, Kafka, Redis, OpenSearch, Sentry,Grafana, Prometheus, Checkmk, Opsgenie, Appdynamics, Testrail, SSO (ActiveDirectory, Okta), Atlassian stack (Bitbucket, Bamboo, Jira, Confluence), Artifactory, Imperva CDN, Fortigate firewall

The Project is a great opportunity to deal with:

• Interesting domain in the financial industry

• Implementation of applications for one of the biggest and respectable brokerage companies

• Friendly team - work with open-minded, remarkable and skilled people

• An Agile 'startup' environment within a well-established international company

• Opportunity to step into a broad product role, drawing upon skills in complex backend systems

• Direct and immediate impact on a company’s business results

• Product with 1M+ customers on production

- Minimum 6-9 years experience in software application design, development and Implementation – Must

- Atleast 6 years experience in Web application development using JavaScript, HTML, CSS -- Must

- 5+yrs experience in Front-End Development using AngularJS & React JS (mandatory) and Java (preferable)

- The ideal candidate will be responsible for designing and developing user interfaces, ensuring responsiveness and high performance.

- Experience in building scalable web applications and collaborating with back-end developers to integrate APIs is essential.

- Strong problem-solving skills and attention to detail are a must.

Responsibilities:

• Assist Project Manager in monitoring and managing the day-to-day operations of project.
• Liaise with consultants and/or sub-contractors on the project matters.
• Attend regular meetings with owner/client/contractors/sub-cons on the project related matters.
• Check drawings and raise technical queries to resolve the discrepancies in between drawings and as well as those arisen during the project execution.

Requirements:

• Candidate must possess at least Bachelor's Degree in Engineering - Civil/Construction/Structural or equivalent.
• At least 1 to 2 Year(s) of working experience in the building construction is required for this position.
• Preferably with main-con experience on residential projects.
• Preferably can communicate in both Chinese and English.
• Preferably Malaysian / Singaporean

Contact:

[email protected]

• Check drawings and detailed design documents for preliminary, construction and as-built using BIM modelling , Revit / Autocad.
• To assist Project Manager on coordination work, planning and monitoring progress and multi-disciplinary works from inception to completion.
• Attend regular meetings, ensuring that relevant management information is captured and analysed and recording decisions, preparation of meeting minutes on project matters.
• To ensure that the project runs smoothly by tracking project progress, effectively and accurately communicate relevant project information to the Client, Management and Project Team.
• Able to understand Engineering drawings (e.g. Plumbing Plans, Lines Diagrams & Schematics, etc.) and able to perform basic engineering calculations, design,
• Any other duties assigned from time to time/s.

· Service Engineers install, service, support, upgrade and maintain product

· To perform a variety of moderate to complex assignments

· Diagnose equipment problems and make repairs or adjustment

· Understand system parameters and interactions to allow process development and extensive electronic troubleshooting

· Being a Service Engineer, this person is to support the team in meeting customers’ expectations and company’s expectations

· Able to support technically inclined

· Direct support to customers’ fab and the workforce to ensure customer satisfaction amongst our customers

Key Accountabilities: ​

Sales Engineering and Application Matters

• Provides the design, drawing and documents for the customer’s technical requirements.
• Calculates, verifies, selects the right equipment/suppliers.
• Provides the technical specifications and defines the scope of supply for the equipment.
• Provides and maintains the product and sales engineering information.
• Uses the computerized engineering tools/database, technical library information and factory standards for the engineering work.
• Prepares and carries out technical presentations and training.
• Familiarize oneself with the applicable international and in country technical standards.

Sales Support Matters

• Work closely with sales to define the technical scope of supply.
• Reviews/clarify customer’s specifications & tender documents.
• Provides technical solutions and scope of supply.
• Coordinates with factory and local suppliers for scope of supply.
• Provides total product and project cost calculation.
• Provides technical specs, scope of supply and work with suppliers/contractors to obtain proposals and quote for the equipment timely.

Order Execution

• Raises the necessary purchase requisitions for the scope of supply.
• Manages the order with internal departments, suppliers and contractors till all contractual requirements are fulfilled.
• Verify on the clarification of the order, sales engineering, and drawings/documents.
• Knowledge in SAP tool

Qualifications and Skills:

• University / college studies in Electrical or Mechanical engineering.
• Experience in the diesel/gas engine/generator industry, min. 7 years.
• Hands on experience on engineering, site supervision and commissioning of diesel genset with knowledge of electrical power systems and genset control system
• Knowledge of engineering calculation for and related to genset and electrical systems.
• Review electrical schematics, wiring diagrams, P&ID and system layouts.
• Knowledge and Project execution in the packaging and testing of genset.
• Knowledge in Autocad would be an added advantage.
• Knowledge of switchgear and electrical power protection would be an added advantage.
• Adaptable to different cultures and business practice
• Excellent team player with an open mindset, collaborative spirit and excellent communication skills.
• Proactive and positive attitude.
• Proficient in English language. Fluent in Mandarin would be an added advantage.
• Willingness to travel.

• Reports to APM
• To assist in site supervision structural and architectural works
• Coordinate with consultant RTO / RE.
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submissions
• Produce weekly site progress reports
• Attend subcon meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements
• At least 2 years of working experience in Building & Construction in HDB (BTO) project
• Building and Architectural experiences
• Conquas Knowledge
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Independent with good communication skill

Job Responsibilities:

• Plan and Execute Machinery Maintenance: Develop and implement maintenance schedules for machinery and equipment.
  Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
  
• Perform Routine Inspections and Preventive Maintenance: Conduct routine inspections and preventive maintenance to optimize machinery performance and extend equipment lifespan.
  
• Coordinate Internal Communication: Liaise internally between operations teams to address machinery breakdowns and operational concerns.
  
• Manage Data and Inventory: Coordinate data collection on auxiliary materials from operations teams and report on a weekly basis.
  Manage receipt, maintenance, and monitoring of machinery parts inventory.
  
• Analyze Maintenance Data and Prepare Reports: Collect machinery maintenance repair data and costs for analysis.
  Prepare monthly machinery reports detailing maintenance activities and performance metrics.
  
• Additional Responsibilities: Undertake additional tasks as required to support operational needs and project requirements.

Job Requirements:

• Bachelor's Degree in Mechanical or Mechatronics Engineering or Equivalent.
• Preferably with at least 3 years of working experience in related field.
• Comfortable working in Workshop environment.
• Those who have experiences in machinery spare parts will have added advantage.
• Knowledge of any ‘Enterprise Resource Planning’ (ERP) software will have added advantage.
• Resourceful with positive attitude and able to work independently.

Location:

• Workshop address: 8 Tuas South Street 10, Singapore 636943
• Shuttle bus to be provided from Choa Chu Kang MRT station to Tuas South Workshop. (2-way)

Building Project/Business development Engineer

Role & Responsibility

Create and execute a strategic project sales plan that expands our customer base and extends the company's business as set

Meet with potential clients and grow long-lasting relationships that address their needs. Set objectives, train and coach foremen, and monitor their performance.

To Lead maintenance, minor work/project teams, advice remedial proposal, manpower, materials, equipment, tools, consumables, height access equipment and other necessary equipment to undertake the following as

The team maintain buildings by making repairs and performing safety checks. Maintain the day to day operations of the building. Perform routine preventive maintenance. Minor Work team performs small values repair under SORs. Ability to work under pressure situations and exercise good judgements. Ability to read and understand test equipment, measuring devices and safety manuals. To carry out any other duties and responsibilities as assigned. Perform as a driver to pick up and drop workers and purchase materials when necessary

He prepares quotations, coordinate repair works schedules, liaise with the subcon / repair work team to start and complete the works. Any other works assigned by management

Capabilities and behaviours

A good team player with strong analytical and leadership skills

Possess good technical knowledge of building works and M & E will be advantage.

Possess good communication skills and be able to relate to different levels of people.

Ability to plan, organise and supervise a team of technicians and contractors in carrying out planned and ad-hoc maintenance work.

Possess strong leadership and interpersonal skills with good command of spoken and written English

Must be prepared to perform shift duties and work on weekends and public holidays

Educations & Experience

Prior experience in building operations in commercial buildings will be an added advantage.

Diploma and above or relevant studies.

Team oriented and good interpersonal skills.

Able to perform 12 hour shift and standby duties.

Only shortlisted candidates will be informed

Salary $1800 - $4500