Job Description
• Involve in the project or maintenance services related with General Security Systems, Alarms
Systems, CCTV Systems , Access control systems and Server & Network infrastructure and whenever required.
• Perform Installation, Implementation, Configuration and testing of system/storage equipment & setup
• Troubleshoot problems encountered on site
• Perform OS hardening, patching and updating on servers/VM
• Develop implementation plan, migration plan and acceptance test plan for the project.
• Conduct acceptance test with users and address the testing findings/issues
• Work closely with Project/Maintenance Managers in planning the implementation tasks
• Maintain accurate and consistent set of work instructions service delivery processes.
• Develop As-built documentation for handover

Job Requirements
• Candidate must possess at least a Professional Certificate/Nitec, Diploma,
Advanced/Higher/Graduate Diploma, Engineering (Electrical/Electronic/Information
Technology ) or equivalent
• Minimum 2 years’ experience in Operational Technology/Information Technology industry
• Knowledge of networking and IP/TCP protocol
• In-depth knowledge in CCTV, Access Control and System Server etc.
• Hands-on experience in security-related tasks such as OS tightening, patching and updating,
virus scanning will be an added advantage.
• IT Certification in windows system & storage, network, database, virtualization, cloud
technologies will be an added advantage
• Good communication skills and positive working attitude.
• Candidate must possess a Class 3 driving license
• Fresh graduates welcome to apply

Please ensure you have submitted the additional information in the form below: https://forms.afizan.com/index.php/275366?lang=en

Please note that we will not consider your application if this form is not submitted.

Position: Data Engineer / Administrator

Employment Type: Permanent

Payroll Company: Afizan Pte Ltd, Singapore

Work Location: Client Site, Maxwell Road, Singapore

Working Hours: 8:30 AM to 6:00 PM

Interview Timeline: Shortlisted candidates will be contacted within two weeks of application.

Compensation and Benefits

• Salary: $4,000 to $6,000 (commensurate with experience)
• Annual Salary Increment
• Yearly Performance Bonus
• Health Insurance
• 5G Smartphone with Plan
• Subsidized Training and Certifications
• Annual Leave: 14 days per year
• Sick Leave: 14 days per year

Key Responsibilities

• Support data engineering tasks, including implementing and maintaining data pipelines and resolving pipeline issues.
• Manage and maintain the data platform by performing regular software version upgrades across all environments, ensuring comprehensive testing and detailed documentation.
• Address daily operational requirements such as configuring applications, managing user access requests, resolving functional queries, and troubleshooting issues.
• Oversee platform maintenance, including application administration, system connectivity, interface integration, and model deployment.
• Conduct periodic reviews of source code and configurations to ensure code quality and verify that sensitive information, such as secrets, is not hardcoded or embedded in source code or configuration files.
• Perform regular patching of Azure Cloud Servers.
• Develop business processes by collaborating with stakeholders to understand use cases for building data pipelines, conducting data modeling, completing data collection forms, documenting use cases, defining data attributes across various data quality zones, and establishing naming conventions for datasets.

Candidate Requirements

• A degree in Computer Science, Engineering, or a related discipline.
• At least 3 years of relevant experience in this role.
• Expertise in architecting, designing, developing, implementing, and maintaining data platforms.
• Proficiency in scripting languages such as Python, PySpark, SQL, Bash, PowerShell, and Git commands.
• Hands-on experience with database technologies such as PostgreSQL, MS SQL, and Oracle.
• Familiarity with CI tools and technologies, including JupyterHub, GitLab, Jenkins, Azure Databricks, RStudio, and PowerBI.
• Experience with containerization technologies like Docker and Kubernetes.
• Skilled in geospatial tools, such as Geopandas, PostGIS, and platforms like ArcGIS Enterprise/Server.
• Proficient in working with public cloud platforms, including Azure and AWS.
• Demonstrates the ability to work collaboratively in a team and a willingness to learn.
• Strong communication skills with the ability to understand and communicate effectively in English, both spoken and written.
• Capability to work independently with minimal supervision and manage tasks proactively to meet deadlines.
• Ability to function effectively in a dynamic and fast-paced team environment.
• Experience with infrastructure-as-code tools such as Terraform and CloudFormation.
• Proficiency in Agile management tools, including Confluence, Jira, and Kanban boards.
• All nationalities welcome, but must be in Singapore with 2 years of local experience.

Why Join Us?

At Afizan Pte Ltd, we pride ourselves on fostering an inclusive and supportive environment where you can grow professionally while contributing to Singapore’s education landscape.

As a trusted name in Information and Communication Technology (ICT) solutions, we have been empowering small businesses, large enterprises, and government agencies for over a decade. Our mission is to make technology seamless and accessible, helping organisations achieve their digital transformation goals.

Join us and become part of a dynamic team dedicated to innovation and service excellence.

For more details, visit www.afizan.com

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for fresh graduate software engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

Fresh graduates welcome to apply for entry level positions.

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Please ensure you have submitted the additional information in the form below: https://forms.afizan.com/index.php/279675?lang=en

Please note that we will not consider your application if this form is not submitted.

Position: .NET Software Engineer

Employment Type: Permanent

Payroll Company: Afizan Pte Ltd, Singapore

Work Location: Client Site, Maxwell Road, Singapore

Working Hours: 8:30 AM to 6:00 PM

Interview Timeline: Shortlisted candidates will be contacted within two weeks of application.

Compensation and Benefits

• Salary: $4,000 to $6,500 (commensurate with experience)
• Annual Salary Increment
• Yearly Performance Bonus
• Health Insurance
• 5G Smartphone with Plan
• Subsidized Training and Certifications
• Annual Leave: 14 days per year
• Sick Leave: 14 days per year

Key Responsibilities

• Maintain and enhance IT applications, including implementing new enhancements, troubleshooting live issues, identifying root causes, and providing effective solutions.
• Design and develop new IT applications based on provided specifications.
• Conduct iterative prototyping to introduce and improve features in the core system.
• Perform design, programming, integration, system testing, and assist users during User Acceptance Testing (UAT) while ensuring proper documentation.
• Create unit tests and end-to-end test scripts to ensure stability when deploying new features, and maintain existing automated scripts in Jenkins.
• Troubleshoot, resolve issues, and develop automated test cases to prevent recurrence of similar problems.
• Ensure all enhancements and fixes are successfully deployed to testing and live environments within agreed timelines, coordinating with end users, server administrators, database administrators, and system analysts.

Candidate Requirements

• Degree in Computer Science, Information Systems, Information/Infocomm Technology, Computer or Electronics Engineering, or a related discipline.
• Minimum 3 years of relevant working experience with expertise in:Web application client-side technologies (e.g., JavaScript/TypeScript ES5/6, ReactJS, React Hooks, Redux, jQuery, HTML5/CSS, AJAX/JSON, NPM).
• Web application server-side technologies (e.g., ASP.NET Core, ASP.NET MVC, C#).
  Web GIS technologies (e.g., ArcGIS JavaScript API, ArcGIS Server REST API, GeoServer, PostGIS).
• Database technologies (e.g., PostgreSQL, MS SQL, Oracle).
  Code version control systems (e.g., Git).
• Additional advantages include:Development experience with Microsoft Azure Cloud and/or AWS Cloud.
• Proficiency in open-source technologies (e.g., NodeJS, Leaflet, GeoServer, PostgreSQL, PostGIS).
• Knowledge of geospatial and mapping concepts (e.g., spatial analysis, map projections) using ESRI technologies.
• Experience in geoprocessing with Python scripts and ETL tools such as FME.
  Familiarity with agile development and DevOps practices.
• All nationalities welcome, but must be in Singapore with 2 years of local experience.
• Strong communication skills in English, both written and verbal.
• Ability to collaborate effectively in a dynamic and fast-paced team environment across Singapore, Malaysia, and India.
• Capable of working independently, with minimal supervision, while meeting deadlines.
• Initiative-driven with a proactive approach to tasks.

Why Join Us?

At Afizan Pte Ltd, we pride ourselves on fostering an inclusive and supportive environment where you can grow professionally while contributing to Singapore’s education landscape.

As a trusted name in Information and Communication Technology (ICT) solutions, we have been empowering small businesses, large enterprises, and government agencies for over a decade. Our mission is to make technology seamless and accessible, helping organisations achieve their digital transformation goals.

Join us and become part of a dynamic team dedicated to innovation and service excellence.

For more details, visit www.afizan.com

To work as a precision engineer operates special-purpose equipment & machines to manufacture components and parts. The engineer is able to read technical manuals, drawing specifications to determine dimensions & tolerances of finished parts. He is able to program CAD/CAM for 3, 3+1 and 4+1 axis machining programs, setup for parts test cut requirements. A critical aspect of the job involves detecting faults in machining aspects, rectifying the root causes and making adjustments on the machines to ensure a smooth operation and machining work. Preferably with rich experience engineer capable to lead and orgainse workshop tools holders, fixtures, automation tools, accessories and materials. Continually to make improvements of the manufacturing process with efficiency and productivity, and be proactive and productive as a team member..

- Carrying out CNC precision machining and general machining

- Able to read and write with effective 3, 3+1 and 4+1 axis CAD/ CAM programme

- Conducting an inspection of maintenance of machines

- Carrying out WIP QC dimensional measurements

Roles and Responsibilities

1. Able to interpret technical drawings requirements and specification

2, Apply approved/ effective way of methods in manufacturing processes

3. Carry out CNC CMM dimensional inspection for 2D/ 3D geometric measurements

4. Carry out CADCAM and electrode programs set up sheet

5. Carry out automate or semi auto to machining processes for high productivity

6. Carry out trouble shooting

7. Carry out working green environment with clean and safe practices

8. Carry out workplace safety and health(WSH) policy

9. Maintenance of machine air-pressure systems

10. Good Knowledge in basic networking, server, IoT for shop floor control

11. Ad hoc duties instructed by supervisor

12. 5.5 day work week

Requirements

1. Diploma or equivalent of certificate or Higher Nitec in precision engineering

2. Min 5 year working experience in relevant field

3. Industry Proficient in 2D/3D dimensional inspection and geometric measurements

4. Resourceful and adaptive to work requirements change

5. A problem solver with leadership and a passion organized team player with good communication skills

Please ensure you have submitted the additional information in the form below: https://forms.afizan.com/index.php/157133?lang=en

Please note that we will not consider your application if this form is not submitted.

Position: Java Software Engineer

Employment Type: Permanent

Payroll Company: Afizan Pte Ltd, Singapore

Work Location: Client Site, Maxwell Road, Singapore

Working Hours: 8:30 AM to 6:00 PM

Interview Timeline: Shortlisted candidates will be contacted within two weeks of application.

Compensation and Benefits

• Salary: $4,000 to $6,500 (commensurate with experience)
• Annual Salary Increment
• Yearly Performance Bonus
• Health Insurance
• 5G Smartphone with Plan
• Subsidized Training and Certifications
• Annual Leave: 14 days per year
• Sick Leave: 14 days per year

Key Responsibilities

• Maintain and improve IT applications by implementing enhancements, troubleshooting live issues to identify root causes, and providing effective solutions to resolve problems.
• Migrate existing applications to a cloud infrastructure, ensuring compliance with security requirements.
• Undertake tasks such as design, programming, integration, system testing, user support during User Acceptance Testing (UAT), and thorough documentation.
• Develop unit tests and end-to-end test scripts leveraging Azure technologies.
• Diagnose, resolve, and prevent recurring issues by creating automated test cases.
• Oversee the deployment of all enhancements and fixes to testing and live environments within agreed timelines.
• Collaboration with end users, server administrators, database administrators, and system analysts supporting IT systems.

Candidate Requirements

• A degree in Computer Science, Information Systems, Infocomm Technology, Computer or Electronics Engineering, or a related field.
• A minimum of 3 years of experience in a similar role with proficiency in:JSP, JavaScript, jQuery, AJAX/JSON, ReactJS.
  J2EE (Weblogic, Tomcat), Struts, Spring MVC, Spring Cloud, or Spring Boot.
  Restful APIs.
  MS SQL, Oracle, or PL/SQL.
• Familiarity with Red Hat Linux OS, Spring MVC, Hibernate.
• Development experience using Azure App Services, Spring Cloud, Tomcat, and MS SQL, alongside Azure DevOps.
• Hands-on experience with agile development and DevOps practices.
• Good working knowledge of version control systems like Git (minimum 3 years).
• GIS map development expertise.
• All nationalities welcome, but must be in Singapore with 2 years of local experience.
• Strong communication skills in English, both written and verbal.
• Ability to collaborate effectively in a dynamic and fast-paced team environment across Singapore, Malaysia, and India.
• Capable of working independently, with minimal supervision, while meeting deadlines.
• Initiative-driven with a proactive approach to tasks.

Why Join Us?

At Afizan Pte Ltd, we pride ourselves on fostering an inclusive and supportive environment where you can grow professionally while contributing to Singapore’s education landscape.

As a trusted name in Information and Communication Technology (ICT) solutions, we have been empowering small businesses, large enterprises, and government agencies for over a decade. Our mission is to make technology seamless and accessible, helping organisations achieve their digital transformation goals.

Join us and become part of a dynamic team dedicated to innovation and service excellence.

For more details, visit www.afizan.com

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Senior Software Engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

· Minimum of 4 years experience

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

Responsibilities:

• Support the QA/QC activities for civil and structural works
• Carry out QC works for works on site and provide inputs to operations team
• Ensure that the work executed is in accordance with the quality control procedures and contractual requirements
• Coordinate with client, project teams, departments and external parties
• Identify potential technical issues and provide recommendations to rectify it

Requirements:

• Degree in Civil Engineering or related discipline
• At least 5 years’ experience in similar role in the construction industry
• Candidates with previous experience working on LTA projects will have an added advantage
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment

Information provided in response to this job advertisement will be treated in strict confidence and be used for recruitment purpose only.

Electrical Engineer (Satellite, Radio Frequency)

The Electrical Engineer is required to attend to pre-sale electrical matters and provide suggestions on project specification and give calculation on the amount of electricity consumption.

Responsibilities:

• To conduct and lead design reviews for Radio Frequency/ Satellite, Network communication systems.
• Responsible for SATCOM/Micro Wave system and network configurations, acceptance, interface and performance testing and commissioning of SATCOM/Microwave systems.
• Understand contractual and project requirements and specifications, propose and generate (SATCOM/MW) system architecture and designs.

Requirements:

• Good in handling Electrical Engineering skills and provide calculation on electricity consumption.
• Ability to calculate on the amount of Electricity required.
• Expert in electrical engineering.
• Good in handling Single diagram and sizing; SLD
• Responsible in handling Electrical Input and output of the equipment and Sizing of electrical equipment
• Good in handling Modulators and Voltage regulator
• Experience in handling Low noise amplifier and Electrical wiring.
• Good in handling Electricity Calculation, Drawing, Design and management of electrical specification with cost and time line.
• Strong knowledge of Radio Frequency, Microwave, Satellite (Satcom) and Microwave.
• Diploma/Degree in Electronics/Electrical Communication Engineering.
• Experience in handling Radio Frequency/ Satellite and Network.
• Proficient in operating RF and electronics test and measuring equipment such as signal generator and spectrum analyzer
• Experience in Satellite/Microwave Communications and Network is an added advantage.
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with your updated resume in MS Words format to : [email protected]

*Only shortlisted candidate will be notified.

Jeline Yong (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Civil Engineering Degree /Diploma with RTO certification and with site work experience on Excavation , Trial Trenching Works , Sewer ,Powergrid /Telecom/Water pipe laying works.Drainage work experience will be an added advantage .

Experience and understanding of LTA code of practice ,NCE requirements of various utilities departments and have an RES certification is preferred .

To manage teams and report to Manager . Team player ,good man power management

• Minimum of 2years of experience in desktop application administration and support.

• Strong knowledge of GL OMS trading platforms and SGX applications.

• Familiarity with workflows involving SGX, SSH, and SFTP protocols.

• Proficiency in Level 1 network troubleshooting, including kiosk PC and network switch support.

• Monday to Friday (5-day workweek).

Covid-19 vaccination compliance is mandatory.

Multiple M&E consultant firms

Location : Town area

Multiple openings for

Mechanical Engineers, Electrical Engineers

Job Description

• Assist Professional Engineer in liaison, preparation and follow up of Authority Submission.
• Work closely with Clients / Architects / Structural Engineers / Quantity Surveyors, etc. to produce design from concept to detail design.
• Identifies discrepancies in results.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design elements for various building services e.g., ACMV, HVAC, plumbing and sanitary, Electrical, ELV, Fire Protection.
• Good understanding of BIM Modelling

Requirements:

• Bachelor Degree in Mechanical or Electrical Engineering from a recognized institution
• Familiar with building code and authority submission procedure.
• Team player and able to work independent with minimal supervision.
• Possess excellent communication and interpersonal skills

Candidates from Contractor firms are welcome to apply

Candidates without experience may be considered, if he/she possess the right attitude.

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Principal Software Engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

· Minimum of 12 years experience

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

We are hiring Contract Quality Engineer to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Scope

• Support Validation Projects: Assist with qualification and validation activities, ensuring compliance with company procedures and regulations.
• Review and Approve Documents: Review and approve validation documents like protocols, reports, and procedures.
• Manage Discrepancies: Identify and address issues in validation protocols, ensuring corrective actions are documented.
• Act as Quality Representative: Participate in cross-functional projects as the Quality Systems and Validation representative.
• Provide Validation Expertise: Offer guidance on creating or updating validation documents, such as for analytical instruments and methods.
• Ensure Document Readiness: Ensure all qualification/validation documents are clear and inspection-ready.
• Support Ongoing Validation: Oversee the Master Validation Plan and support routine qualification activities.
• Collaborate Across Sites: Help standardize validation processes across multiple sites.
• Train and Coach: Develop training materials and provide support to team members and other departments.

Job Requirements

• Bachelor’s degree in Pharmaceutical Sciences, Life Sciences, Biology, Biotechnology, Chemistry, Chemical Engineering, Engineering, or related field.
• At least 2-3 years of experience in quality assurance, manufacturing operations, or validation in the pharmaceutical or biotechnology industry. Experience in equipment, process, cleaning, and computer systems validation is preferred.
• Strong understanding of FDA/EU cGMP requirements, including CFR 21 Part 11, and familiarity with PDA and ISPE GAMP guidelines.

All Interested candidates are invited to email your resume in MS Word format to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Sheryl Tan
Outsourcing Team
Recruit Express Pte Ltd
Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

• Support the planning, implementation and upgrade of the cybersecurity products and solutions.
• Train external and internal clients on how to use the company products and solutions.

Requirements:

• Diploma in IT/Cyber Security Engineering or equivalent
• At least 2 years of CyberArk experience in IT, IS or Cybersecurity industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities:

• Performs all SQS work assignments in accordance with the standard work procedures, practices and specifications
• Review of Vendor Documents for Compliance to project requirements/ spectification and international standards
• Implements and adminsters the Quality Assurance Plan manifested by QA Supervisor for field and participates on a day to day basis in quality assurance activities.
• Review and approval of quality related specification, painting procedures, SAT and FAT procedures, NDT procedures, EIT related documents, pre com and commissioning documents
• Prepares and issue QAQC reports
• Organizes and perform audits and surveillance at a supplier's (or their sub suppliers) facility to verify compliance with qualification requirements
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor's Degree in Naval Architecture / Marine and Offshore / Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Well conversant with codes & standards like ASME, API, ANSI, AWS, IACS, ABS, NR etc

Our Addresses and Working Hours:

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You are responsible for ensuring robust infrastructure, managing servers, databases, analyzing system operations, and supporting digital transformation in semiconductor manufacturing.

Key Responsibilities:

• Assisting in the IT infrastructure to ensure the seamless operation of a semiconductor intelligent manufacturing.
• Handling digital transformation initiatives within the organization to enhance operational efficiency and effectiveness.
• Navigating the complexities of international IT projects, ensuring successful collaboration and cross-cultural teamwork.
• Assisting in Fab infrastructure system solutions.
• Performing server, storage, and database management to maintain optimal system performance and reliability.
• Conducting system operation optimization analysis to identify and implement improvements for enhanced performance.

Education Qualification & Essential Experiences:

• Diploma in Computer Science, Electrical, Mechanical, Information Technology or a related field.
• Strong understanding of semiconductor technology is preferable.
• Knowledge of SPC, FDC, CIM, and Full Automation
• Proficient in at least one of the following programming languages: C, C++, C#, Java, or Python.
• Capability of RTD (Real-Time Dispatching) is a plus.

Personal Attributes:

• Must be available to travel to Taiwan for a training period lasting 6 to 9 months.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.
• Open to taking on challenging tasks and embracing new opportunities.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

• Implement software development/support for automated computer vision equipment.
• Participate in Software Development Life Cycle.

Requirements:

• Diploma in Engineering
• At least 2 years of working experience in Visual Studio Development Environment.
• Good understanding of automated Computer Vision equipment, image procession automatic

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• We are seeking for service Engineers with hands-on mechanical expertise for commissioning, troubleshooting, repair and overhaul of ship's propulsion systems.
• Well verse with broad range of engineering aspect such as mechanical, hydraulics, electronic control systems and industrial automation are involved
• Good understanding of automation and mechanical systems involved.
• Interest in shipbuilding and heavy machinery as well as in industrial control and automation technology is required.

Requirements

• Possess at least a Diploma or Bachelor’s Degree in Mechanical, Mechatronics, Electrical Engineering and adequate work experience with marine propulsion systems.
• Able to travel overseas and work at irregular work hours when required.
• Able to work with minimal supervision.
• Possesses good communication skills

Kindly understand that only shortlisted candidates will be notified.

WeLead Solutions Pte Ltd

Poon Wai Soon, Bernard

Reg. No: R2197713

EA License No.: 23C1882

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible for ensuring wafer products meet quality standards by developing shipment procedures, improving processes, resolving anomalies, and overseeing staff training.

Key Responsibilities :

• Develop and maintain wafer product shipment standards and procedures to ensure alignment with customer quality requirements.
• Improve the quality of wafer product shipments by identifying areas for enhancement and implementing corrective and preventive actions.
• Analyse and address quality control inspection anomalies, promptly resolving customer complaints.
• Conduct process analysis and lead continuous improvement initiatives for semiconductor products to elevate overall product quality.
• Oversee training and certification programs for quality control personnel to ensure strict adherence to quality standards and procedures.

Education Qualification & Essential Experiences:

• Bachelor's degree or higher in Electronics, Materials, Chemical Engineering, or other related engineering or science disciplines
• At least 1 years of relevant work experience.

Personal Attributes:

• May need to travel to Taiwan for a training period lasting 6 to 9 months.
• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible to ensure the reliability and stability of semiconductor processes and achieve it through advanced testing, analysis, and collaboration with both internal teams and external clients.

Key Responsibilities:

• Develop and implement reliability assessment systems for semiconductor processes, including TDDB, HCI, BTI, PID, EM, and SM.
• Design and conduct reliability tests to evaluate process performance and durability, analyse test data, and provide recommendations for process technology improvements.
• Provide expert technical support to clients by diagnosing reliability issues, addressing their concerns, and delivering solutions to improve process performance.
• Assist the manufacturing team in managing abnormal events by conducting reliability risk assessments and suggesting improvements to mitigate risks.

Education Qualification & Essential Experiences:

• Bachelor’s degree or higher in Electronics, Electrical Engineering, Physics, or a related technical field.
• Minimum of three years of relevant experience in semiconductor process reliability engineering.
• Strong problem-solving skills and a detail-oriented approach with the ability to analyse complex data and derive insights.

Personal Attributes:

• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.es.