Title: Manual Test Engineer

For quick response, please share your resume to [email protected] or WA to +65 92333815.

JD:

1. Candidate to have past system testing knowledge
2. Raise problem tickets to technology team for issues encountered in System testing
3. Create test cases based on user requirements
4. Escalate to managers / test leads in case of issues unresolved or blocking the test progress
5. Provide status updates on test progress and defects status on regular basis

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

HP: +65 92333815

Recruitment Manager

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

Primary Objective(s) of Position
• Manage key phases of projects such as assembly, testing, installation, pre-commissioning, commissioning, troubleshooting, repairs and maintenance for the marine, power generation, petroleum, construction and industrial market segments.
• Responsible for product service support related work on both diesel and gas engines.
• Support the design and development of other aspects of projects, when required, including tendering, contract review, design, drawing, scheduling, purchasing, packing and shipment of marine and oil and gas engines, and respective associated propulsion and / or power generation systems, as per customers’ requirements.

Duties & Responsibilities
• Perform installation audit checks on engine set-ups at site and ensure equipment installations are according to manufacturer guidelines/recommendations, and generate report, as required.
• Perform pre-commissioning, commissioning and sea-trial activities (where applicable) at customer sites (in Singapore or overseas) to ensure proper equipment operation as per equipment manufacturers’ guidelines / customers’ requirements.
• Perform supervision of the assembly and packaging of engine and generator set packages at the workshop, inclusive of inspections and testing, as and when required.
• Configure engine settings and parameters to meet specific requirements.
• Utilize diagnostic tools, software and technical manuals.

Duties & Responsibilities (Cont’d)
• Investigate engine malfunctions, diagnose issues and identify root causes.
• Interpret error codes, schematics, and technical manuals to pinpoint root causes of engine malfunctions.
• Propose and implement effective solutions to resolve problems.
• Supervise the disassembly and reassembly of engines for repairs and overhauls, when required.
• Supervise the replacement of faulty components, bearings, seals and gaskets.
• Calibrate and fine-tune systems for optimal performance.
• Conduct functional tests of repaired or newly installed mechanical and electrical systems.
• Perform dyno / load testing on engines and generator set packages.
• Maintain accurate records of inspections, repairs, maintenance activities and testing results.
• Generate technical reports and service documentation for customers and internal use.
• Conduct on-site familiarisation training to operators, when required.
• Provide remote or on-site assistance for troubleshooting, technical support and guidance to customers.
• Attend / Conduct engineering and project meetings and on-site inspections both in Singapore and overseas (when required).
• Adhere to safety protocols and regulations while working on engines to prevent accidents and ensure a safe working environment.
• Other ad hoc tasks as assigned by management.

Person Specifications
• Possess a diploma/degree in Mechanical or Automotive Engineering.
• At least 2 to 3 years of working experience in related industry.
• Strong understanding of diesel and gas engine principles, components and systems.
• Proficiency in diagnosing and troubleshooting engine issues.
• Able to read and interpret technical manuals, schematics and engineering drawings.
• Attention to detail and commitment to safety.
• Good problem-solving skills and attention to details.
• Effective communication skills for interacting with customers and colleagues.
• Ability to work independently and as part of a team.
• Must be able to travel overseas as and when required.

1. Provide timely and effective technical support for application-related incidents and service requests.

2. Troubleshoot and resolve application issues, both independently and in collaboration with development teams.

3. Monitor application performance, identify bottlenecks, and implement performance enhancements.

4. Conduct root cause analysis for recurring issues and implement preventive measures.

5. Collaborate with internal stakeholders to gather requirements and provide recommendations for application improvements.

6. Maintain documentation related to application configurations, troubleshooting procedures, and known issues.

7. Participate in application deployment and release management activities.

8. Stay updated with industry trends and emerging technologies to drive continuous improvement in application support processes.

9. Support UAT and Interface Testing

Requirements:

1. Must have minimum 5 years experience.

2. Strong technical knowledge and experience in supporting enterprise-level applications.

3. Proficiency in troubleshooting application issues, performing log analysis, and using monitoring tools.

4. Experience with databases and SQL query language.

5. Familiarity with software development life cycle (SDLC) and ITIL principles.

Preferred Skillset

• Java

• Oracle Database

• MySQL Database

• Jira

• Excel

• Diploma / Bachelor's degree in a related filed or equivalent experience.
• Minimum 1 year of experience in installation of Electricla and communication infrastructures.
• Prior experience in Railway preferred.
• Oversee the installation of various systems, equipment or machinery.
• Ability to work in a fast-paced environment.
• Team player with good interpersonal and communication skills
• Able to work indepdently with minimum supervision.
• Candidate with 5+ years of experience will be considered for Managerial role.

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

We are seeking an experienced Senior Software Engineer with expertise in C++ or Java to join our client team. The ideal candidate will have at least 4 years of hands-on experience in software development and a passion for building high-performance, reliable, and scalable systems.

Responsibilities:

• Design, develop, and optimize software solutions using C++ or Java, ensuring high performance and reliability.
• Collaborate with cross-functional teams to define, design, and ship new features or improve existing systems.
• Troubleshoot and resolve complex technical issues, ensuring minimal downtime and optimal system performance.
• Lead code reviews to maintain coding standards and mentor junior developers.
• Contribute to system architecture discussions and help design scalable and efficient software systems.
• Develop and implement unit tests, integration tests, and documentation to ensure code quality.
• Stay updated with the latest trends and advancements in C++/Java and related technologies.
• 
  

Requirements:

• A graduate in Computer Science, Software Engineering, or a related field.
• At least 4 years of professional experience in software development with a strong focus on C++ or Java.
• Solid understanding of object-oriented programming (OOP) principles and design patterns.
• Experience with multithreading, memory management, and performance optimization in C++ or Java.
• Proficiency in working with databases (e.g., MySQL, PostgreSQL, or NoSQL databases).
• Familiarity with version control systems (e.g., Git) and CI/CD pipelines.
• Excellent problem-solving skills and the ability to work effectively in a collaborative environment.
• Knowledge of cloud platforms (e.g., AWS, Azure, GCP) and containerization (e.g., Docker, Kubernetes).
• Experience with frameworks/libraries such as Spring (for Java) or Boost (for C++).
• Familiarity with network programming, real-time systems, or distributed computing.
• Exposure to Agile development practices and tools like JIRA.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Roles & Responsibilities

• Assist Project Manager to ensure project is progressing as planned and is completed on time within budget, contractual and Safety standards.
• Assist Project Manager to ensure all site works are done accordingly to specifications and to relevant authorities’ requirement.
• Prepare & submit drawings, materials and necessary documents to consultant for approval.
• Check working drawing, identify discrepancies for resolution.
• Maintain inspection records of works, materials and all completed works.
• Keeping track on variation and claims of contract and cost impact and feedback information to the Project Manager.
• Implement cost control measures to meet project budget.
• Site co-ordination with all concerned parties and to resolve site issues.
• Handle any other ad-hoc duties and tasks assigned.

Requirements

• Candidate must possess at least a PEB/BCA recognized degree in Civil Engineering
• Minimum 3 years on site experience in Civil Engineering and Infrastructure works in Singapore
• Computer literate with knowledge of MS Project, Primavera, BIM and AutoCAD
• Ability to work independently and communicate at all levels.
• Advantageous to possess Class 3 Driving License

**Please submit your complete CVs exclusively in written form to [email protected]**

As a Cloud DevOps Engineer, you will run and support the company’s software application infrastructure in the cloud, ensuring the optimized use of resources to scale.

What will you do

• Design, develop, and implement cloud infrastructure as code using Terraform.
• Manage and optimize cloud resources for cost-efficiency and performance.
• Secure infrastructure by implementing best practices and adhering to security compliance standards.
• Implement robust monitoring and alerting systems for infrastructure resources.
• Collaborate with developers and operations teams to integrate infrastructure changes seamlessly into the software development lifecycle.
• Champion DevOps best practices for cloud infrastructure management.
• Setup, monitor and support CI/CD pipeline on premise or in the cloud.
• Stay up to date on the latest AWS services and Terraform features.

What do we expect

• Proven experience as a DevOps Engineer with at least 3 years of experience (with a focus on AWS cloud infrastructure).
• Implementation proficiency in service control policy and account governance (Control Tower, OU management, etc.).
• Enable and configure AWS VPC flow logs, load balancer logging, direct connect, AWS VPN, TGX etc.
• Experience managing Unix/Linux environments.
• Extensive experience in scripting in languages such as Python/Ruby/Perl and shell scripting.
• In-depth knowledge and experience with AWS services (EC2, S3, VPC, IAM, etc.).
• Expert-level proficiency in Terraform, including writing reusable modules and leveraging best practices.
• Able to troubleshoot infrastructure issues in cloud, identify root cause and implementation improvement and fixes.
• Good knowledge of microservices architecture, container technologies (Docker, Kubernetes).
• Expertise in Git and GitOps philosophy.
• Good people skills, teamwork, collaboration with cross function and cross-geo teams.
• Self-motivated, willing to learn new technologies continuously.
• Maintain documentation for design, integration, testing, and deployment.

Good to have

• Relevant DevOps certifications (e.g. AWS).
• Some experience with other cloud providers like Azure and GCP.
• Experience with CI/CD pipelines and integrating infrastructure provisioning with development workflows.
• Knowledge on mobile and web applications development.
• Knowledge of big data and data analytics infrastructure in cloud.

Roles and Responsiblities

1. Site project management.

2. Overall project planning, scheduling, monitoring and updating to meet project completion targets.

3. Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

4. Work closely with sub-contractors on project progress and ensure timely work arrangements

5. Liaise with consultant and carry out site inspection.

6. Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

7. Preparation of structural analysis, loading calculation and drawings.

8. Establish good relationship with all relevant parties.

9. Ensure site safety & compliance to authorities’ requirements.

10. To take on PE Assignee supervision role.

Requirement

1. Degree in Civil Engineering or relevant Engineering

2. Min. 3 years’ experiences.

3. RE registration with IES

4. Experience in Infra-structure project more than 200million.

Other informaiton :

Work location at Bugis

To Apply

Please submit updated CV with below details.

• Current & Expected Salary

• List of Projects Handled

• Notice Period

Role & Responsibilities:

• Develop, implement, and manage security controls to block and mitigate security threats across the IT infrastructure.
• Understanding of perimeter and endpoint security solutions and able to create policies based on requirements.
• Evaluate and perform analysis of the business risks and control environment to identify weaknesses and design the control to operate effectively.
• Regularly review and fine-tune existing policies to ensure they remain effective and up to date with the evolving latest security threats and best practices.
• Collaborate with other teams to ensure policies are aligned with organizational goals and compliance requirements.
• Troubleshooting policies if they are not working as intended.
• Monitor and Analyze Security Events: Continuously monitor security events and alerts, analyze potential threats, and take appropriate actions to prevent security incidents.
• Policy Development: Develop and maintain security policies, procedures, and guidelines to ensure compliance with industry standards and best practices.
• Incident Response: Collaborate with the incident response team to investigate and respond to security incidents, providing expertise on security controls and mitigation strategies.
• Reporting and Documentation: Maintain detailed documentation of security controls, configurations, and incidents. Prepare regular reports on the effectiveness of security controls.
• Training and Awareness: Provide training and guidance to other team members and stakeholders on security controls and best practices.

Skillset (Must have):

• Experience: Work experience in cybersecurity, with a focus on policy creation, monitoring, and incident response.
• Technical Skill: Skilled in managing NDR, EDR, WAF, email security, and DLP policies. Strong understanding of endpoint/network security, threat detection, and incident response. Proficient in SIEM data querying and analysis.
• Analytical Skill: Excellent analytical and problem-solving skills, with the ability to analyze complex security issues and develop effective solutions.
• Communication Skill: Strong written and verbal communication skills, with the ability to convey technical information to non-technical stakeholders.
• Team Player: Ability to work collaboratively with cross-functional teams and build strong working relationships.
• Accountability and Responsibility: Take ownership of assigned tasks and projects, ensuring they are completed on time and to the highest standards. Proactively identify areas for improvement and take the initiative to address them.
• Critical Thinking: Apply critical thinking skills to analyze complex security issues, evaluate potential solutions, and make well-informed decisions.
• Independently perform tasks and responsibilities with minimal dependency and guidance, while continuously learning and adapting to evolving technologies.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Basic Qualification : At least ITE or Diploma in Electrical / Electronics

Minimum Experience : Fresh Grads /1 year working experience in installation in the field

of People Counting System, CCTV, Electronic Article Surveillance (EAS), Alarm System, Trouble Shooting, PC

literate.

Expected Skills : Knowledge of electrical & electronics

Good project supervision & documentations control

Independent

Driving Licence : Class 3 is required

Others : Able to communicate in English & Mandarin

5 days week – Monday to Friday 8.30am to 6.00pm

Lunch break : 45mins

Salary Range : $2K to $2.5K

Job Description

• Report to the Asst. Service Manager
• Responsible for project, implementation, installation, testing & commissioning of the system
• To carry out the maintenance works and services according to the maintenance contract.
• To manage and supervise the work progress of each project site by attending regular site meetings, coordinating with appointed sub-contractors of various services to see to ensure that projects are completed on schedule.
• To ensure proper and accurate records and documentations for the repair & servicing
• To standby and attend service calls

Location: Bukit Merah Central

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Key Responsibilities:

- Develop and maintain C# 3.5 applications (WinForms, WPF, ASP.NET, etc.).

- Design and implement scalable, performant software solutions.

- Troubleshoot, debug, and optimize application performance.

- Collaborate with cross-functional teams to deliver business solutions.

Required Skills:

- Demonstrated Projects in C# .NET and SQL Languages

- Past project demo is expected during interview

- Working Experience - Fresh Grad + Internship experience in Agile Set Up

Test Engineer

Our reputable client is looking for a System Test Engineer Lead (Selenium) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 5 years of System Test experience using Selenium.
• Experience in leading a Team of Engineers.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Description

• Industry/ Organization Type: Manufacturing/Electronic Components and Boards
• Position Title: R&D Engineer
• Working Location: Bedok
• Working Hours: Monday – Friday, 8.15 AM – 6.15 PM
• Salary Package: Basic Salary up to $4,000 + Transport Allowance + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Researching electronic components and designing new products to meet market needs.
• Supporting the complete R&D project life cycle and participating in all phases from concept to manufacturing through designing, prototyping, validation, and production of R&D products, taking into account the functionality, feasibility, quality, manufacturability, costs, and completion time.
• Giving concise and informative demos/presentations to other team members or product managers about design concepts.
• Finalizing a design and its deliverables to facilitate a smooth transition to the relevant stakeholders.
• Preparing product documentation like the bill of material, material specification, and process documentation.
• Evaluating processes and design improvements.
• Coordinating with the Global R&D team.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Bachelor’s Degree in Engineering or Technology (Electrical/Electronics) or equivalent
• Has a minimum of 2 years of experience with passive electronic components design
• Has understanding and work knowledge of AutoCAD Electrical
• A good understanding of product safety, environmental testing, and electromagnetic compatibility (EMC) will be advantageous

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69868 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Requirements:

• Degree/ Diploma in Computer Science/IT, Engineering or equivalent.
• Must have 10 – 12 years in IT Security and 5-7 Cybersecurity experience, responding to IT Security incidents/ monitoring.
• Must have minimum 5 years of experience in Cloud Infrastructure services for Amazon, Ali cloud or Google including Cloud Security.
• Mandatory experience in full life cycle of Incident Handling with minimum 3-5 major incident handling, reporting and resolution.
• Good to have GIAC Certified Incident Handler (GCIH), GIAC Certified Intrusion Analyst (GCIA) or GIAC Certified.
• Good to have experience in security tools SIEM, EDR, SOAR, UEBA, VA etc.
• Must have experience in internal / external stakeholder management.
• Excellent Written and Verbal Communication Skills.
• Ability to Work Independently

Key Responsibilities:

• Carry out implementation activities for plant modifications, capital projects and other identified plant improvement projects in line with defined specifications, and qualification of facilities in accordance with site to approved procedures.
• Provides trouble shooting / continuous improvements to processes / systems.
• Maintain high GMP standard meeting the regulatory expectations such that the site is always inspection ready.
• Monitor and enforce compliance measures (including Data Integrity and safety) within their specific discipline to ensure inspection readiness of plant, as well as participate as an audit team member in the conduct of audits.
• Implementation of the GSK Production System (GPS) for Engineering department.
• Support on shutdown activities and on preventative plant maintenance for various systems at site.
• To support the development of facility master plan to ensure compliance to engineering standards, management of obsolescence and asset replacement.
• Monitor and manage the DCS/PLC systems to ensure constant and reliable support to the plant at all times so as to minimize disruption to the production process.

Skills, Knowledge & Experience:

• Good degree in Controls and Instrumentations - related progream
• Minimum 2 years of Controls experience in the process / pharmaceutical industry
• Experience in Delta V system, especially batch process.
• Experience in SIL calculation and TMR system (Honeywell Safety Manager) will be added advantage.
• Experience in the Siemen PLC system will be added advantage.
• Good understanding of validation process
• Familiar and understanding of Global Engineering Standard (GES) and understanding of industrial standards.
• Basic commercial knowledge & project management skills
• Effective communication & Operational Excellence skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Responsibilities:

• Identifying, qualifying, and securing business opportunities; coordinating business generation activities; developing customized targeted sales strategies
• Building business relationships with current and potential clients
• Collaborating with sales and leadership to secure, retain, and grow accounts
• Collaborating with management on sales goals, planning, and forecasting; maintaining short- and long-term business development plans
• Manage and build up prospect data and approaching progress
• Reviewing result end of month/ Monitor KPI as set by manager
• Update market information and competitor's trend

Requirements:

• Some experiences in logistics field of Sales/Business Development will be an advantage.

You may email your resume to [email protected] for more information.

Regret to inform you that only shortlisted candidates will be contacted by our consultants.

Align Recruitment Pte Ltd (20C0253)

Pan Hong (Reg No. R2094728)

The Data Analytics and Reporting Platform Technology Team in Payments is focused on providing innovative banking solutions that will support long term banking data storage, data processing, reporting and analytics. JP Morgan Chase processes trillions of dollars a day and settles some of the most critical global financial transactions.

As a Lead Software Engineer at JPMorgan Chase within the Payments Technology Software Engineering Group, your primary role will be to solve business problems through innovative and engineering practices. Your extensive knowledge and expertise will be applied across all aspects of the software development lifecycle. You will be expected to continuously collaborate with various stakeholders to maintain focus on shared objectives. Our culture encourages experimentation, continuous improvement, and learning in a collaborative and thought-provoking environment that values diversity of thought and creative solutions for our global customers. As passionate advocates for software solutions, we aim to deliver real and measurable business value. We appreciate creative innovators who are analytical thinkers with a bias for action in problem-solving. Utilizing design thinking and agile processes, we strive to align our solutions with the rapidly evolving market expectations. Joining our team means becoming part of a global network of inspiring and curious technologists dedicated to modern software delivery processes like continuous delivery, operational visibility, and automation. Besides your strong technical expertise, we expect you to voice out opportunities for improvement and engage in active learning to keep your skills updated.

Job responsibilities

• Executes creative software solutions, design, development, and technical troubleshooting with ability to think beyond routine or conventional approaches to build solutions or break down technical problems

• Develops secure high-quality production code, and reviews and debugs code written by others

• Identifies opportunities to eliminate or automate remediation of recurring issues to improve overall operational stability of software applications and systems

• Leads evaluation sessions with external vendors, and internal teams to drive outcomes-oriented probing of architectural designs, technical credentials, and applicability for use within existing systems and information architecture

• Leads communities of practice across Software Engineering to drive awareness and use of new and leading-edge technologies

• Provides overall direction, oversight, and coaching for a team of entry-level to mid-level software engineers that work on basic to moderately complex tasks

• Adds to team culture of diversity, equity, inclusion, and respect

Required qualifications, capabilities, and skills

• BS/BA degree in Computer Science, Engineering, Mathematics or related disciplines

• Minimum 12 years of experience of applied experience delivering system design, application development, testing, and operational stability

• Strong proficiency in Java8+, Spring Boot and other Spring modules like Spring MVC, Spring data JPA, JDBC Template.

• Expertise in building RESTful Web Services and microservices using Spring framework.

• Expertise with modern front-end technologies like Reactjs

• Experience with processing large volumes of near real-time data via messaging platforms such as Apache Kafka.

• Experience with persistence technologies such as relational and NoSQL platforms.

• Hands-on experience with any container technologies such as Docker and Kubernetes

• Proficiency in automation and continuous delivery methods. Proficient in all aspects of the Software Development Life Cycle. Advanced understanding of agile methodologies such as CI/CD, Application Resiliency, and Security

• Demonstrated proficiency in software applications and technical processes within a technical discipline (e.g., cloud, artificial intelligence, machine learning, mobile, etc.)

• Good knowledge of the financial services industry and their IT systems, preferably Payments Domain. Practical cloud native experience, AWS

Preferred qualifications, capabilities, and skills

• Knowledge of Apache Flink to process real-time Kafka messages

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=374100eabc67cba0a8290d27bbd934d1

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities:

• Analyse project/business needs and necessary technical requirements, activities and employees, monitor planning continuously and take corrective measures if necessary.
• Coordinate the different technical activities (conceptual design, built, mobilisation, commission, maintenance and repair) in own focus area.
• Prepare and request budget for technical activities (based on detailed specifications), manage actuals and present views.
• Ensure conceptual, basic and detailed design is executed according to needs defined and in accordance with compliance regulations.
• Write technical specifications to workshops/shipyards, suppliers and service providers for technical asset production, repair and/or maintenance, evaluate proposals and decide on parties, in accordance with Technical Specifications and in agreement with Technical Manager, draft contract/PO and ensure execution/delivery according to these agreements.
• Have relevant expertise in the technical field, keep up with relevant developments in the own area and related areas of expertise and contribute to the (technical) field by developing new, state of the art knowledge and exchanging knowledge with colleagues.

Requirements:

• Relevant tertiary qualifications/Degree/Diploma/Master in Science or Engineering (or equivalent knowledge and experience)
• With minimum 7 years of relevant work experience
• Meticulous, organised and attentive to details in the midst of a fast-paced environment
• Analytical and problem-solving skills
• Excellent verbal and written communication skills in English
• Proficiency in MS Excel and IT skills

Responsibilities :

• Perform electrical and electronic conceptual details design work.
• Responsible for the analysis, definition, design, construction, testing, installation, modification, and maintenance of automated machines, containing software as the major component.
• Writes new machine program, makes modification to existing machine software, or integrates software application.
• Creates and executes until testing and integration testing ensuring machine software meets requirements.
• Identify, define and implement the technical architecture for use of auto visual inspection in our product within budget and schedule.
• Review electrical and electronic documents/drawings.
• Creates, reviews, and maintains all required technical documentation/manual related to assigned software to ensure supportability and reuse.
• Participate in project planning sessions with team members to analyze development requirements.
• Reviews project work with the team, included the machine design engineers and engineering engineers.
• Provide timely status updates for areas of individual responsibilities within projects to superior.
• Provides technical support to operations or other development teams.
• Overall responsibility for technical issues and coordinate with other disciplines.
• To participate in the continuous improvement programs to explore ways and means to improve production efficiency and reliability.

Requirements :

• Bachelor's Degree in Electrical, Electronics Engineering with min one (1) years of relevant experience.
• Experience working with vision system database.
• Knowledge of camera, light, and lens selection for applications ranging from defect detection to part location.
• Programming background with high-level languages such as Visual C# WPF, C++ and Python.
• Experience in developing vision system with Halcon and Opteon camera.
• Good knowledge in Machine Vision programming and experiences.
• Good experience on automation controls, motors & sensors like PLC, CTC, Beckoff PC and controllers, Servo & Stepper motors.
• Familiarity with wiring/cabling size/terminations and load/temperature requirements.
• Familiarity with industrial machinery design.
• Skilled in the utilization of statistical analysis.
• Required to travel regionally (average 20% of the time).
• 5 days work week.
• Transport pick-up at Bedok MRT station.

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.