Job Description

• Prepare and review Instrumentation, Control and Automation (ICA) Works specifications.
• Assist the ICA Lead and manage the engineering design works for the Control System Architecture, Data Communication Networks, Functional Design Specification (FDS), Process Control Narrative (PCN) and Process Instrumentation Diagrams (P&IDs), Programmable Logic Controller / Distributed Control System (PLC/DCS) and Supervisory Control and Data Acquisition (SCADA) and any other ICA Works as required.
• Handle equipment package and procurement including technical specifications preparation, technical clarification, technical bid analysis, etc.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages contractors, sub-contractors and vendors to ensure success of the project.
• Prepare, review and liaison with subcontractor(s) in the design and submission, ensuring all project specifications and design standards are met.
• Work with cross function project team to support project activities, i.e. schedule, process, progress claims, work progress, etc.
• Manage and supervise the project execution, site installation, inspection, testing and commissioning, plant proving related to Instrumentation, Control and automation system and interface works with other disciplines and all stakeholders.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all ICA related design, installation and Testing & Commissioning Works.
• Resolve the site technical related matters.

Design, Engineering, FAT, Installation, Testing and Commissioning of:-

• System Control PLC/DCS and SCADA.
• Input / Output list
• Data Communication Network and ICA Panels.
• Instruments.
• FAT and SAT of Interfacing Panels, Instruments, Pumps, etc.
• Cable Support System.
• Cabling & Termination Works.

Requirements

• Degree in Electrical & Electronic Engineering / Instrumentation & Control Engineering / Advanced Diploma in Process Control and Instrumentation.
• Experience in Selection, Installation, Testing and Commissioning of the Instrumentation.
• Experience in ICA engineering Works, preferably in water/wastewater projectswill be an added advantage.
• Experience in Programming of PLC/DCS and SCADA.
• Experience in Project Execution, Supervising and Coordination with subcontractors, consultant and Client.
• Good knowledge in Microstation/Autocad software.
• Good technical understanding and experience in water, wastewater and environmental engineering works.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.
• Minimum 5 years relevant experience in engineering, installation, testing and commissioning of ICA Works.
• Able to work in the Tuas South area, in Singapore.

Key Responsibilities

· Manage, configure, and troubleshoot Active Directory (AD) infrastructure, including group policies, user accounts, and access controls.

· Perform AD migrations, upgrades, and health checks.

· Monitor AD replication, manage DNS, and ensure AD environment security.

· Deploy, manage, and maintain virtualization platforms such as VMware, Hyper-V, or other solutions.

· Optimize virtual machine (VM) performance and resource utilization.

· Implement failover clustering and disaster recovery for virtualized environments.

· Install, configure, and manage Windows-based servers (2016/2019/2022).

· Monitor server performance, patch management, and OS updates.

· Troubleshoot and resolve hardware and software issues on Wintel systems.

· Ensure system availability and reliability through proactive monitoring and issue resolution.

· Perform regular system backups, updates, and recovery tasks.

· Implement security best practices for Windows and virtualized environments.

· Conduct audits and maintain compliance with industry standards (ISO, GDPR, etc.).

· Work closely with cross-functional teams to support IT initiatives.

· Develop and maintain technical documentation, SOPs, and guidelines.

Qualifications and Requirements

· Bachelor’s degree in computer science, Information Technology, or a related field (or equivalent experience).

· Minimum 2-3 years of experience in IT systems administration or engineering.

· Hands-on experience with AD, virtualization technologies, and Wintel systems.

· Proficient in Active Directory, Group Policies, DNS, and DHCP.

· Expertise in virtualization platforms such as VMware, Hyper-V, or similar.

· Strong knowledge of Windows Server OS (2016/2019/2022).

· Experience with backup solutions, scripting (PowerShell), and monitoring tools.

· Strong problem-solving and troubleshooting abilities.

· Excellent communication and teamwork skills.

· Ability to work in a fast-paced environment and manage multiple priorities.

· Certifications such as MCSA, MCSE, VMware VCP, or equivalent are a plus.

· Experience with cloud platforms (Azure, AWS) is advantageous.

Interested candidates please click apply or email your resume to [email protected]. Please note that only shortlisted candidates will be notified.

EA Registration No: R1655133 (MOHAMED ASHRAF S/O HAMID ALI)
Links HR Singapore Pte Ltd | EA License No: 09C5322

• Plan, build and optimize infrastructure setup, design and performance.
• Manage backend information systems, including of virtual machines and virtualization platform, including of network storage, backup, Fibre channel switches.
• In-depth experience in Linux administration. Need to be expert level
• Strong understanding of High Availability setup for Linux/Windows applications (etc. webs, database)
• Strong network fundamentals – IPv4/IPv6 – addressing, NAT, Routing
• Network and Systems troubleshooting and maintenance
• Good to have disaster recovery planning and execution
• Private cloud administration experience is a must – VMWare / Hypervisor
• In-depth experience in DNS, DHCP, Proxies, Linux firewalls & network security is a must.
• Maintain and Administer Security Appliances of different projects
• Design and propose a plan that will improve the hosting service of the Data Center

Company Background:

GWS Living Art is a team of urban green technology specialists based in Singapore. We specialize in turnkey development and implementation of nature-based solutions, including Green Wall systems and Green Roofs. Our mission is to address environmental challenges through innovation and provide sustainable solutions for a better world.

We are looking for a Project Engineer to join our team! In a construction team, the Project Engineer works under the guidance of the Project Manager in the execution of construction projects. Candidates who possess suitable qualities will be closely mentored to gain both technical and management qualities. It is a role with good developmental potential as candidates can eventually pursue a career in Project Management, Safety Management or Professional Certifications.

Job Description:

• Assist with on-site management to ensure project success
• Assisting to plan for the progress of various projects through the deployment of manpower, equipment and logistics
• Assist in the preparation of technical documents, such as construction drawings
• Work together with other members of the team to effectively execute the operations plan
• Assist in the safety and risk management of operations
• Other ad hoc duties as required

Job Requirement:

• 1 or 2 years of working experience as a Project Engineer would be an advantage.
• Both fresh graduate and experienced candidates are welcome to apply (mature and non-mature).
• Recent postgrads with a Bachelor’s degree in Engineering preferably Mechanical & Electrical / Civil Engineering / Environmental.
• Basic Microsoft Office skills and Construction knowledge.
• Knowledge of Safety and Risk Management would be an advantage.
• Knowledge of using any Autodesk software (e.g. AutoCAD/ Revit/ BIM 360) would be an advantage.
• Good interpersonal and communication skills.
• Able to start work in short notice will be preferred

Working Day: Monday to Friday

Working Hours: 9am to 6pm

ENGIE Services Singapore is a leading provider of Integrated Facilities Management solutions (IFM), property management, operations and maintenance, specialized rail engineering works, sustainable solutions and FM Consultancy services. With strong presence in various counties across South East Asia, we operate across mission-critical industries - aviation, transportation, healthcare, education, government and commercial.

ENGIE understands the integrated role of facility management and the value of it can be expanded beyond the traditional approach. As a total FM, specialized engineering and sustainable real estate solutions service provider, ENGIE offers a comprehensive range of technical, digital and support services customizable to best suit your unique needs.

Responsibilities

• Serve as the central point of command within FMC, coordinating responses to critical system issues and managing communications with relevant stakeholders.
• To identify the root cause for alarm/alert generated from the monitoring workstations.
• Manage and lead a team of shift technicians in facility management and operation of the assigned site.
• Plan and execute with relevant teams or contractors of the corrective maintenance.
• Provide positive and professional working relationship with internal team and stakeholders/clients.
• Work collaboratively as part of a team within the Fault Management Centre and with other departments.
• On daily basis, to follow up on anomalies or fault detected from the use of BMS/working monitoring workstations (critical system such as HVAC, Electrical, Fire Alarm etc)
• Collaborate and communicate effectively all facilities team, providing updates on system health.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Work with preventive maintenance team to implement preventive measures to reduce fault occurrence.

Job Requirements

• Diploma or Degree in Engineering; Facilities Management, or related field.
• Proven experience in building or facilities management, preferably with exposure to BMS, HVAC, Electrical, and Fire Alarm systems.
• Strong technical troubleshooting skills and ability to quickly diagnose faults.
• Ability to work independently and response to incidents calmly and efficiently.
• Excellent communication skills and attention to details.
• Willingness to work in shift patterns.

Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by Site Manager / PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage

Responsibilities:

• To perform engineer’s role on method statement, implement cost & time efficiency on operation
• To checking plans, drawings and quantities for accuracy of calculations
• To supervise site works compliances and inspection requirement
• To carry out daily site supervision, coordination and quality assurance of all trades implementation on site
• To work closely with sub-contractors on project progress and ensure timely work arrangements
• To scheduling materials and equipment purchases and deliveries
• To liaise with consultant and carry out site inspection
• Attend all site's meeting on work progression
• To prepare monthly meeting progression report

Requirements:

• Possess Degree in Civil Engineering
• 3 years working experience in Construction
• Able to work independently
• Have positive attitude

Responsibilities:

• Agree to detailed programmes of work - time chart and representation on site plans
• Check that all necessary drawings and instructions have been given to contractors and authorisations obtained, in accordance with the agreed programme
• Check that materials are ordered in good time and permits OK.
• Check that all construction work is carried out in a safe manner, and that the site is kept secure
• See that requirements of specifications in regard to materials and workmanship are complied with by contractors. This includes sample tests of material and workmanship.
• Watch for faulty workmanship and material incorporated in the works and to issue instructions for rectifications
• Check line and level and layout of structure during erection and that intentions of contract drawings are adhered to
• Check structural slab beam and column sizes and reinforcements placed and that intent of design details are followed
• Keep a record of all measurements and tests and to bring plans into conformity with the work actually executed
• Issue such further instructions and clarifications of details as and when required; and to inform Architect for issuance of Architect's Instruction or Architect's clarification.

Requirements:

• At least 4 to 6 years or more relevant experience in industrial buildings
• A recognised university degree in Civil Engineering
• Able to start in Jan 2025
• Comfortable for Project Site at Tuas South

• Design new solutions or fixes to enhance existing applications using web-enabled development programs using Java, Angular,SQL/Oracle, XML, and similar or other web services and service-oriented tools.
• Development experience with Java, J2EE, Spring, Springboot, Angular
• Strong development skills using Java and Spring Framework.
• Strong RDBMS skills using SQL,Oracle.
• Stron expereince in Angular.JS and Javascript
• Experience in Python development.
• Participate in the final phases of deploying and performance tuning of the application and help identify performance bottlenecks and suggest work-around
• Manage ad-hoc requests and multiple projects simultaneously while operating in a high tempo environment with ever-changing priorities and tasks.
• Proficient with popular frameworks such as Django, Flask, or Pyramid.
• Design, develop and implement new applications, enhancements, and new features to our products
• Prepare accurate and detailed requirement specification documents, user guides, and functional specification documents

☑ Basic $3000 - $4800

☑ Permanent role + High Variable Bonus.

☑ 5.5 Days (Mon – Fri: 8.00pm – 5.30pm / 8.30am – 6pm ; Sat: 8am - 12pm)

☑ East Area – Tampines

☑ Semicon Construction

Job Responsibilities

• Safety Management: Implement and maintain a Site Safety Management System to minimize risks and prevent accidents.
• Safety Programs: Execute workplace safety, health, and environmental initiatives, ensuring compliance with regulations.
• Training & Enforcement: Conduct safety training and inspections to ensure adherence to safety standards on-site and at HQ.
• Compliance: Ensure strict adherence to statutory safety and health requirements, and manage safety reports and audits.
• Team Leadership: Work with WSH coordinators and supervisors to uphold safety practices at the project site.
• Continuous Improvement: Stay updated on industry best practices and regulatory changes, and assist in safety certifications.

Job Requirements:

• Diploma in Environment, Health and Safety Management or related field.
• 1-3 years’ experience in construction safety.
• Possess positive and willing to learn attitude.
• Able to multi-task and able to work in a fast-paced environment.

· Project Planning and Scheduling: Define project scope, organize tasks, set timelines, and manage resources to achieve project milestones and final deadlines.

· Resource and Risk Management: Coordinate materials, workforce, and equipment while identifying and addressing project risks to maintain quality and avoid delays.

· Progress Monitoring and Documentation: Track each phase of the project, document updates, and prepare detailed reports for stakeholders, including test report documentation.

· Quality and Benefit Realization: Ensure that all work meets quality standards, aligns with client expectations, and delivers intended project benefits.

· Safety Awareness and Leadership: Promote and enforce safety protocols, leading by example to maintain a secure and efficient work environment.

· Essential Skills and Qualifications:

· Electrical Drawings and CAD Proficiency: Skilled in reading electrical schematics and proficient in CAD software (AutoCAD, Revit) for design and planning.

· Strong Organizational and Problem-Solving Abilities: Ability to organize complex projects and solve challenges that arise.

· Effective Communication: Clear, professional communication skills for collaboration with team members, contractors, and clients.

· Driver’s License (Preferred): A valid driver’s license is advantageous for site visits and project mobility.

About Us

Vivo Surgical is a patient-focused, clinician-driven medical device developer and manufacturer. Headquartered in Singapore with offices in China and Thailand, we are pioneering a novel endoscopic surgical robot for complex endoluminal surgeries. ISO 13485 certified with international accreditations awarded such as the US FDA and European CE mark, our devices target the medical needs of the world through innovative applications of science & technology. These encompass such fields as in vivo surgical LED lighting, portable endoscopy and endoscopic robots, which are strategically co-developed with world-class healthcare institutions and KOL collaborators. Join us as we build towards our vision of being Asia Pacific’s leading medical device developer and manufacturer.

About The Role

We value the importance of having a robust engineering team that would serve as a key pillar for sustained commercial success. To that end, we are looking for an Electrical Engineer to join us on this journey. In this role, you will be part of our fast-growing team and will take ownership of your role from the get-go. You will be working on the electrical interfaces of our robot from the design and development phase all the way to manufacturing. You will be developing these solutions alongside our clinical KOLs to produce and test the parts and subsystems that will eventually be integrated into the robotic system. Throughout the process, you will also be involved in the verification and validation testing phase such as producing testers, generating test protocols and reports. Your role will require you to work in close tandem with our external partners and suppliers.

Your responsibilities shall include the following:

• Involved in the establishment of the robotic system’s design requirements according to users’ needs.
• Design and develop hardware system architecture and electrical systems based on set requirements.
• Generate schematics and electrical diagrams following respective standards and best practices.
• Source, evaluate and troubleshoot components, PCBAs, wire harnesses and subsystems.
• Assist in developing test protocols and reports to verify various subsystems and the main system.
• Involved in developing testers and test tools for verification tests.
• Support the team with electrical safety and EMC testing.
• Take part in the design control and risk management documentation generation tasks.
• Work with the team to optimize the system’s cost, manufacturability, quality, and reliability.
• Contribute and watch your ideas materialize into the fast-paced iterations of our system to constantly strive to meet the end users’ needs.

Your Qualifications & Experience

• Minimum Bachelor’s degree in Electrical Engineering, or related.
• At least 3 years’ experience in Electrical, Embedded Systems, Robotic Engineering, or related fields.
• Skilled in PCB design software such as Altium Designer or other similar tools.
• Experience in circuit design with ARM MCUs is essential.
• Hands-on experience with embedded communication protocols such as UART, I2C, SPI, CAN, TCP.
• Knowledge of embedded platforms such as MCUs (STM32), DSP, FPGA will be advantageous.
• Adept at utilizing equipment such as multimeters, oscilloscopes and spectrum analyzers.
• Hands-on experience with soldering equipment and crimpers preferred.
• Knowledge of C/C++ and Linux will be an advantage.
• Understanding of standards such as IEC 60601-1, 60601-1-2 and 62304 will be a plus.
• Strong analytical, troubleshooting, problem-solving, and communication skills.
• Ready to embrace a positive and collaborative mindset to thrive in the dynamic start up environment.

Contact

Please send your CV and cover letter to: [email protected]. We look forward to receiving your application.

Main Responsibilities

• Participate to the automation of the deployment solution.
• Participate in environment preparation for testing phases.
• Participate in developing tools to simplify day-to-day activities on the program.
• Facilitate coordination between program developers and infrastructure engineers.
• Ensure continuous improvement and maintenance of the CI-CD pipeline.
• Provide investigation help while fostering knowledge and sharing best practices with team members.
• Document processes and ensure their properly followed.
• Ensure high standard delivery to production.

The position requires autonomy and reliability in performing duties while maintaining close communication with rest of project/support team.

Qualifications

Mandatory

• At least 3 years in Software development or DevOps team.
• At least 2 years in Java/J2EE development
• At least 2-year experience with Jenkins, GIT (GitLab)
• At least 1-year experience in Ansible
• At least 1-year experience in GitLAb

Good to have

• Experience with DevOps methodology & tools like Jenkins, GIT (GitLab), Ansible, Docker/ Kurbernetes, CICD pipeline, Java dev context for the tooling, Database or Big Data storage systems, Grafana / Prometheus / Alert Manager / ELK / Kibana, Jira etc.
• Experience of grid computing.
• Basic understanding of finance and investment banking especially Market Risk.

Other Professional Skills and Mindset

• Excellent written and verbal communication skills for both team mates and management
• Strong analytical and problem solving skills
• Proficient software development life cycle
• Appetite to follow technology trend and participate to communities
• Passion for sharing expertise and grow team members’s skills
• Interest in learning from team members and mentoring junior team members on the path of high quality deliverables.

Next Step

• Prepare your updated resume and expected package.
• Simply click on 'Apply here' or email to [email protected] to drop your resume
• All shortlisted candidates will be contacted.

Tamanna Bilandi

EA Licence No. 91C2918

Personnel Registration No. R2096241

Job Description:

• Perform structural analyses for fixed and floating offshore structures, including global and local assessments.
• Design and optimize marine and offshore structures to meet project requirements and industry standards.
• Prepare structural design specifications, drawings, and technical documentation for fabrication and construction.
• Conduct finite element analysis for load-bearing structures, considering factors such as fatigue, buckling, and impact.
• Assist in the preparation of technical reports, including global analysis, fatigue life evaluation, and strength assessments.
• Assist in the preparation of technical reports, including global analysis, fatigue life evaluation, and strength assessments.
• Collaborate with multidisciplinary teams, including naval architects, mechanical engineers, and project managers.
• Provide support during fabrication, installation, and commissioning phases to ensure structural integrity.
• Coordinate with clients, classification societies, and third-party reviewers to obtain design approvals.

Requirements:

• Bachelor’s degree in Marine Engineering, Structural Engineering, or a related field.
• Minimum of 5 years of experience in structural engineering, preferably in marine & offshore projects.
• Proficiency in structural analysis software such as SACS, SESAM, or equivalent.
• Strong understanding of structural design principles, finite element analysis, and material behaviour.
• Knowledge of industry standards and codes, including AISC, API, ISO, DNV, or other relevant guidelines.
• Excellent problem-solving skills with attention to detail and accuracy in calculations.
• Strong communication and interpersonal skills for working in a multidisciplinary team environment.
• Ability to prepare clear and concise technical reports and documentation.

Overview

As the Lead Engineer at Synapxe, you will be responsible for overseeing the design, implementation, and maintenance of our IT Systems. As an experienced Systems Engineer, you will continue to optimise systems performance to ensure its availability. The role will allow you to contribute to the overall success of Synapxe and public healthcare.

Role and Responsibilities

Infrastructure Design and Implementation:

• Lead the design and deployment of infrastructure solutions such as Server OS, Active Directory, VMware and related services.
• Ensure the architecture aligns with business objectives and best practices.

Systems Enhancement and Maintenance:

• Administer and maintain servers, storage systems, virtualization platforms, and networking equipment.
• Monitor system performance and proactively troubleshoot issues to ensure optimal operation.
• Implement monitoring tools and systems to proactively detect and resolve performance issues.
• Continuously optimize system performance and capacity.

Disaster Recovery and Business Continuity:

• Develop and maintain disaster recovery and business continuity plans to safeguard critical systems and data.
• Conduct regular testing of recovery procedures.

Troubleshooting and Resolution:

• Oversee the assessment of risks to systems.
• Identify complex system issues to provide advisory to the stakeholders.
• Provide escalation support for issues presented by the user.

Requirements / Qualifications

• Bachelor's degree in computer systems, information technology, or a related field (or equivalent experience).
• 9 years of experience in systems engineering or a similar role.
• Extensive knowledge of server administration, operating systems (Windows and Linux/Unix), virtualization technologies, and networking concepts.
• Excellent problem-solving and decision-making abilities.

Responsibilities

• Documenting and definng the Factory & Production processes and procedures across the Group
• Recommend and implement improvements to process and process automation
• Deploy and implement the Production processes and procedures in Singapore and overseas
• Manage the next-gen production system for switchgear manufacturing and assembly
• Responsible for the Audit and Compliance of Factory and Process Engineering across the Group
• Any other duties related to operations and process engineering

Requirement

• Degree/Diploma in Electrical, Mechanical Engineering or related field
• At least 2 years of relevant working experience in process engineering in the manufacturing environment
• Have initiative, able to work independently
• Possess strong analytical and problem solving skills
• Good communication and written and presentation skills
• Able to travel overseas

Job Responsibilities:

• Design Gas Compression package, Power Generation package, Process Module (dehydration, refrigeration, seawater treatment system, etcs), for oil & Gas production facilities, ie FPSO, FPU, offshore fixed platform, etcs.
• Coordinate with other engineering disciplines to ensure compliance with standards (API, DEP, etcs) and clients’ specifications.
• Collaborate with clients and principals for design optimization.
• Participate in technical meetings (Hazop, Technical Clarification meeting), may require overseas travel.
• Any other ad-hoc as assigned

Job Requirements:

• Minimum Diploma / Degree in Chemical Engineering or Mechanical Engineering.
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• In house & overseas training will be provided if required.
• Able to work independently in a flexible, dynamic and fast-paced environment.
• Positive working attitude.

Working hours: 8am to 5pm

Transport provided at the nearest MRT.

For keen applicants, please email [email protected]

• Listed Company
• Basic $3000 to $4800 + VB + Excellent Benefits
• Career Progression + Good working environment
• Advise Management team on the Safety Requirements

Job Responsibilities:

• Implement safety procedures to all work operations, promote the safe conduct of work within the project and enforce the Safety Rules and Regulations
• Investigate accidents, put up necessary reports and recommend remedial actions
• Conduct Safety inspections and put up reports on follow-up actions
• Participate in project OHS risk assessments and, compile all safety records and reports
• To assist Project Manager to liaise with the management, relevant authorities when and accident / incident occurs
• Authorized to issue Stop Work Order (SWO), if any site work, process and/or work area is in imminent danger to workers, the public and/or pollution of the environment

Requirement:

• ITE Certificate in Engineering or Safety related qualified professional certificates
• At least 2 years of working experience in Site Safety Work

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

Overall Summary:

Network Engineer will drive the implementation of strategy for infrastructure operations and maintenance to ensure availability of stable and secure systems. He/She manages project resource allocation and develops infrastructure implementation, operations and maintenance engineers; scopes out policies and sets performance expectations. He identifies problems and presents new methodologies and/or solutions to key stakeholders to enhance and improve the delivery of infrastructure operations and maintenance services.

Roles and Responsibilities:

Support infrastructure design and implementation

• Support technical system analysis to determine the extent to which solutions perform “as required” to ensure that future solutions meet anticipated demand
• Support the design and implementation of infrastructure solutions that adhere to current architecture standards
• Lead the design installations, system migration and integration
• Lead the testing and handover of implemented infrastructure solution

Support infrastructure operations

• Support delivery of optimal infrastructure operations
• Create documents on administration, installation, configuration and troubleshooting
• Apply diagnostic tools to perform technical analysis of complex software, hardware and infrastructure equipment
• Support the development of report on infrastructure capabilities and limitations

Maintain infrastructure

• Support the improvement of maintenance capability by using automation for upgrades, enterprise backup and storage
• Identify key infrastructure operations issues and maintenance priorities
• Support the implementation of agreed infrastructure change requests and maintenance routines
• Develop report on performance and availability of infrastructure systems by review of service uptime, utilisation, throughput etc.

Optimise infrastructure performance

• Support the initiatives to improve the infrastructure systems and service delivery through automation and virtualisation technologies
• Support the monitoring of performance, availability and security of infrastructure systems and key operational metrics

Resolve incidents

• Support problem/issue identification and resolution
• Escalate problems/issues
• Support simulation of user problems to resolve operating difficulties
• Diagnose problem source through discussions with users
• Recommend system modifications to reduce user problems
• Support planned maintenance events, system backup processes and disaster recovery drills
• Support implementation of preventive solutions

Qualifications/ Requirements:

• Bachelor in Computer Engineering
• Possessed CCNA, CCNP, CCIE is preferred.
• At least 5-8 years of network experience
• Experience in leading a team of 3-5 network engineer.
• Familiar with Cisco, F5, VM
• Exposure to large scale project execution
• Open to support patches/ upgrades and Tech refresh (after office hours/ weekends)

Key Responsibilities

• Install new systems, machinery, or equipment at client sites, ensuring all components are set up according to manufacturer specifications and safety standards.
• Perform on-site commissioning to ensure systems are operating correctly, testing functionality, and providing training to customers on proper usage.
• Perform routine and preventive maintenance on equipment, systems, and machinery to extend operational life and reduce downtime.
• Diagnose and troubleshoot complex mechanical and electrical failures to identify the root cause and provide effective solutions.
• Repair and replace faulty components, parts, and equipment to ensure systems are restored to peak performance.
• Provide on-site or remote technical support to customers experiencing issues with their equipment, offering clear instructions and guidance.
• Document all service-related activities, including diagnostics, repairs, and parts used, into the company's service management system.
• Escalate unresolved issues to senior engineers or technical experts for more in-depth investigation.
• Act as a key liaison between the customer and the company, ensuring customer satisfaction through timely, high-quality service.
• Develop and maintain strong customer relationships to foster long-term partnerships and ensure repeat business.
• Monitor inventory levels of parts, tools, and consumables required for service jobs, ensuring timely reordering and availability.
• Ensure the proper handling and storage of tools and equipment to maintain their integrity and readiness for future tasks.
• Create detailed service reports documenting the service work performed, including diagnostics, repairs, parts replaced, and any customer feedback or recommendations.
• Ensure all work complies with safety, legal, and regulatory requirements, as well as company standards.

Pre-Requisites (Qualifications & Experience)

• Candidate must possess at least a Diploma or Degree in Biomedical or Electronics & Computer Engineering
• Knowledge in Information Technology and/or a wide range of medical product
• 2 – 3 years of field experience in the medical industry would be an advantage
• Able to travel as and when required
• Able to perform shift and standby duties
• Good organizational and problem solving skills
• Good interpersonal and communication skills
• Meticulous and detailed-orientated
• Self-started and able to multitask
• Critical thinker
• Willing to learn clinical knowledge
• Proficient in MS Office Application (Word, Power Point, Excel)
• Good Technical Knowledge

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Create and deploy software solutions for high-speed automation systems.
• Architect, program, test, troubleshoot, and verify software applications.
• Assess and define system performance metrics and requirements.
• Software support to field service teams, update and optimize software for equipment.

Requirements

• Expertise in C/C++ programming and multi-threaded Windows development with Visual C++.
• Strong knowledge of electronic components, motion control, and interfacing with inspection systems.
• Proficient in mathematical principles and algorithm development.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Justine @ 9755 9161

Shortlisted candidates will be notified

Justine Lam Nyok Yuen

Reg No. R1218722

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Job Description

• Collaborate with project engineer and quality team to design, develop, implement and deploy test processes for new projects.
• Complete test programs for production and manage test programs and control:

- Continuity Test

- 4-Wire Continuity Test

- Functional/Final Test

• Support instrumentation needs including:

- Work with engineers and technicians in development of headers

- Testing jigs

• Develop Acceptance Test Plan per product requirements.
• Develop and document testing procedures per product requirements.
• Engage in both sustaining and NPI support activities
• Identify necessary enhancements to diagnostics deployed in manufacturing and works with quality teams to drive corrective action.
• Ensure headers have sufficient quantity to support the production needs.
• Engage in both sustaining and NPI support activities.
• Perform root cause analysis for any testing related failures.
• Perform other duties/projects as required or assigned from time to time.

Requirements

• Degree in electrical or mechatronics engineering
• Minimum of 2 years experience in Electrical testing, Manufacturing, or similar roles.
• Strong background in testing principles, header & test jig development and processes.
• Design best-in-class performance testing approaches and plans for new projects per customer requirements.
• Must be well versed in electrical know how.
• Able to work well with inter-teams.
• Well versed in CIRIS tester will be an added advantage.