This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

We are seeking a highly motivated researcher with expertise in cybersecurity to join our dynamic team. The successful candidate will be responsible for designing, developing, and prototyping novel defense solutions to address cybersecurity, privacy, and resilience challenges in smart nation/smart city critical infrastructure that includes information, energy, water, smart building, and industrial IoT.

Your Responsibilities:

· Design system models and simulations to identify weak points and evaluate defence solutions.

· Develop tools and algorithms to analyse system vulnerabilities, detect cyberattacks, and perform threat hunting.

· Research ML/DL technologies to enhance threat detection processes and protect industrial systems against emerging cyber threats.

· Design and development of a digital twin and cyber range.

· Conduct full-stack research from fundamental to translational research.

· Conduct security testing to support and evaluate research, including prototyping cybersecurity technologies for demonstration.

Requirements

· Possess a PhD degree in Computer Science or a related field.

· Strong research track in system modelling/simulation and/or developing ML/DL models.

· Proficient in ML/DL concepts and frameworks such as Pytorch and Tensorflow.

· Proficient in Python, C, and/or C++.

· Familiar with system development and setting up virtual networks.

· Experience in threat modelling and vulnerability assessment.

· Experience in cybersecurity and cyber-physical systems is a bonus.

· Experience with graph theory and graph neural network is a plus.

Responsibilities

• Performing laboratory tests in order to produce reliable and precise data to support scientific investigations;
• Carrying out routine tasks accurately and following strict methodologies to carry out analyses;
• Preparing specimens and samples;
• Constructing, maintaining and operating standard laboratory equipment, for example centrifuges, titrators, pipetting machines and pH meters;
• Ensuring the laboratory is well-stocked and resourced

Requirements

• Min Diploma in Chemistry, Biotechnology, Biomedical Science or equivalent
• Excellent communication skills
• Meticulous and able to handle numbers
• Proficient in Microsoft Office
• Able to start work immediately as position is urgent

Interested candidates please send a copy of your resume to [email protected]

Leon Leong De Cong
R1551708

Recruiter's Ref Code: #HDC

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Contract Period: From 1 Jan 2025 to 31 Dec 2026

Working hours:
*Monday to Thursday – 7.15. am – 4.45pm (inclusive of 1hour lunch time)
*Friday – 7.15am – 4.15pm (inclusive of 1 hour lunch time)
*Service not required on Saturdays, Sundays and gazetted public holidays

Scope of Services:

a) Provide support to teachers in teaching and learning
b) Assist in the preparation of apparatus, equipment and reagents for laboratory lessons
c) Maintain general cleanliness of equipment and workplace
d) Simple administrative and office work as and when request
e) Any other duties assigned by Science HOD or School

Qualification, Skill & Experience:

• Candidate to preferably possess at least a GCE “O” Level qualification
• Good interpersonal and communication skills
• Ability to multitask, work both independently and as a team
• Prefer candidates to have at least 3 years of working experience as a Science Laboratory Assistant
• Preferably first aid trained
• Preferably competent in MS Office

Mon-Fri, 8.30am-6pm. Available for occasional night/weekend/PH project as required

Office location: Outram

Responsibilities

• Lead and direct projects and ensure they are directed towards a common objective
• Engage and communicate with stakeholders to deliver project milestones and comply with strict deadlines
• Ensure client satisfaction and manage escalations, acting as single point of contact to the client
• Ensure that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Ensure proper documentation is in order
• Any other duties as assigned

Requirements

• Preferably with 2 years’ relevant work experience, or entry level candidates in relevant field of study
• Good communicator with excellent coordination skills
• Ultra-sensitive to deadlines and capable of good resource planning
• Basic technical knowledge on ELV, Automation, Networking and Security Systems (CCTV, Card Access, Alarm System) will be an advantage
• Committed individual with great initiative and strong problem-solving skills
• Candidates from the same industry will be highly preferred
• This job is suitable for older workers

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Devon Yang Yue Teng | EA Personnel No.: R24123723

Contract Period: From 3 Jan 2025 to 31 Dec 2026.

Working hours:
• Mondays to Fridays from 7.30 am to 2.30 pm, inclusive of 1/2 hr lunch break.
• Service not required on Saturdays, Sundays and gazetted public holidays.
• Service not required during Mar, June, Sep and Nov/Dec school holidays unless specified by HOD Science.

Scope of Services:

In the Area of Teaching and Learning
1. To prepare and get ready resources for Science teaching and learning
2. To assist Science teachers in the setting up of experiments, etc. for Science lessons and/or activities and clearing of resources after each Science lesson and/or activity.
3. To assist in the setting up of ICT and Science equipment such as projector, iPads, dataloggers, and microscopes for Science lessons and/or activities
4. To perform yearly inventory and stock taking of Science resources and equipment in the 2 Science Laboratories and TinkerSpace.
5. To organise the Science resources and equipment in the 2 Science Laboratories and TinkerSpace.
6. To maintain cleanliness and assist in ensuring safety in the 2 Science Laboratories and TinkerSpace at all times.
7. To assist in conducting simple Science enrichment activities such as showcasing the life cycles of some animals and creative toys during designated recesses / Science school-based events to complement Science learning in the classroom.
Science Projects
1. To assist in the loan and yearly inventory and stock taking of resources in various Science Programmes e.g.TinkerSpace Programme, Science Sparkles, E2K-Ignite Programmes, etc.
2. To assist the department in monitoring the Aquaponics System including feeding the fishes and harvesting the produce.
3. To assist the department in the feeding and maintainance of the Mealworm Beetles, Stick Insects Enclosure, etc.
4. Must be able to comfortably handle ‘live’ specimens e.g. mealworm beetles
Others
To do any other duties as assigned by HOD Science.

Qualification, Skill & Experience:

1. Minimally ‘O’ level qualifications
2. Must have at least 2 years of working experience as a Science Laboratory Assistant/ Laboratory Technician
3. Proficient in MS Excel

Innovation Factory

We are a multi-disciplinary design team whose primary role is to identify opportunities and problems that others choose to ignore and solve it with innovative and ingenious solutions that defy convention using proven technologies or innovations. Through compelling presentations with stunning product visuals to highlight the benefits of the featured innovation, it encourages technological adoption. We bridge the gap between technologies and customers by acting as a catalyst for greater idea generation and getting customers to understand innovation better from a layman perspective.

Job Summary:

As you unleash your creativity and competencies, you will establish strong partnerships with new and existing industry members, work with engineers to build world-class products and applications for our customers. By understanding our customers’ real business and product needs, you strive to deliver goals, create impacts, and enjoy working in a dedicated cross-functional team environment. You will develop business strategy and implement membership roadmaps aligned with our objectives and business plan.

Responsibilities:

• Achieve goals in the translation of R&D outcomes to viable products and solutions.
• Analyze market trends by category, develop business strategy and implement membership roadmaps and new growth markets.
• Build and manage project, business and technology portfolio in order to develop business opportunities and generate revenue streams.
• Prepare compelling presentations and proposals for organisation’s value proposition and sales efforts.
• Organise and facilitate workshops to build and maintain strong relationships with key customers and partners.
• Collaborate closely with A*STAR Industry Development Group, research entities, and other Centres of Innovation.

Job Requirements:

• Bachelor’s Degree in a related field.
• Highly motivated to deliver high-quality and professional ethics with passion for business development, and managing customer relationships.
• Strong business acumen, and results-oriented with a strategic mindset.
• Strong negotiation and interpersonal skills and able to adapt in a fast-paced business environment.
• Bonus – Sustainability framework in Product Management: Develop and implement strategies for integrating sustainability and energy efficiency into the product lifecycle, from conception to market launch.
• Bonus – Experience in a sustainability or ESG-related role, demonstrating a track record of innovation and delivering tangible business value.
• Bonus – Experience within the Aircraft Interiors, Medical device or other regulated industry.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Innovation Factory

We are a multi-disciplinary design team whose primary role is to identify opportunities and problems that others choose to ignore and solve it with innovative and ingenious solutions that defy convention using proven technologies or innovations. Through compelling presentations with stunning product visuals to highlight the benefits of the featured innovation, it encourages technological adoption. We bridge the gap between technologies and customers by acting as a catalyst for greater idea generation and getting customers to understand innovation better from a layman perspective.

Job Summary:

As you unleash your creativity and competencies, you will establish strong partnerships with new and existing industry members, work with engineers to build world-class products and applications for our customers. By understanding our customers’ real business and product needs, you strive to deliver goals, create impacts, and enjoy working in a dedicated cross-functional team environment. You will develop business strategy and implement membership roadmaps aligned with our objectives and business plan.

Responsibilities:

• Achieve goals in the translation of R&D outcomes to viable products and solutions.
• Analyze market trends by category, develop business strategy and implement membership roadmaps and new growth markets.
• Build and manage project, business and technology portfolio in order to develop business opportunities and generate revenue streams.
• Prepare compelling presentations and proposals for organisation’s value proposition and sales efforts.
• Organise and facilitate workshops to build and maintain strong relationships with key customers and partners.
• Collaborate closely with A*STAR Industry Development Group, research entities, and other Centres of Innovation.

Job Requirements:

• Bachelor’s Degree in a related field.
• Highly motivated to deliver high-quality and professional ethics with passion for business development, and managing customer relationships.
• Strong business acumen, and results-oriented with a strategic mindset.
• Strong negotiation and interpersonal skills and able to adapt in a fast-paced business environment.
• Bonus – Sustainability framework in Product Management: Develop and implement strategies for integrating sustainability and energy efficiency into the product lifecycle, from conception to market launch.
• Bonus – Experience in a sustainability or ESG-related role, demonstrating a track record of innovation and delivering tangible business value.
• Bonus – Experience within the Aircraft Interiors, Medical device or other regulated industry.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Highlights:

• Contract Duration: 9 months
• Salary range: $2500 - $2800 (per month)
• Nearest MRT: Kent Ridge
• Working hours: Monday – Friday; 8:30am – 6:00pm

Requirements:

• Diploma holders.
• Minimally 1 year of working experience in Administration, Research Support.
• Strong English writing and communication skills for clear documentation and reporting.

Description:

• Gather and organise information for the technology transfer study.
• Help organise and take notes during focus group discussions.
• Analyse study results and write reports with recommendations.
• Assist in reviewing and managing projects that turn research into real-world solutions.
• Provide support for meetings and events as needed
• Other duties as assigned.

Interested applicants, please apply via the job portal or forward your CV to [email protected]

Giovanna Widjaja

Outsourcing Team

Reg No: R22108890

BGC Group Pte Ltd

EA Licence number: 05C3053

Our client is an asset management firm with an AUM of 1.5 bill equity fund. They provide good

employee benefits and company culture.

Location: Singapore

Department: Invest - Equity

Reporting to: Portfolio Manager - Equities

Reporting to the Portfolio Manager – Investments Equity. The incumbent is responsible for producing quality investment ideas and covering portfolio companies. Assisting the Portfolio Manager in managing portfolio in his absence. Overseeing all the trading activities for the Equity portfolio on a daily basis while assisting the fixed income trading when the Fixed Income PM is on Compliance leave.

Job Description

• Conduct research and suggest companies for investment from the allocated industries and any other investable company.
• Provide investment materials on companies and keeping track of companies and industries.
• Understand companies positioning, business potential, possible threats etc for recommendation for investment ideas and buy / sell decisions.
• Evaluate solid businesses / companies eligible for re-rating.
• Managing communication of investment philosophy, and match investor expectation by beating the market
• Oversee the portfolio under the guidance of Portfolio Manager where they deem necessary.
• Ensure compliance to investment rules
• Implementing the trades on a regular basis as per the requirements of the portfolio using the system
• Assist to reply to investor queries related to the portfolio/Macro
• Preparing investor reporting material wherever required for different funds Monthly, Quarterly and adhoc
• Preparing internal presentation for fund discussions

Role Competencies

• Mid Cap exposure or people with stock specific expertise.
• Able to grasp concepts readily
• Deep understanding of equity investment processes, capital markets, companies & sectors.
• Strong analytical and quantitative skills.
• Able to provide first class services that includes asset allocation, fund portfolio construction for investments, backed up with adequate research.
• A good and focused team player
• Able to prepare and organize research materials in the form of a report logically as well as in the form of a presentation that is readily understood by the reader.
• Knowledgeable with internet & high value information resources like Bloomberg, Thompson research etc. will be an added advantage.
• Some knowledge of trading and the systems used for the same
• Some knowledge of portfolio level allocation

Requirements

• CA / MBA or post-graduate degree in Finance/Economics, with 6-10 years of experience in Analysing Indian Equities
• Able to meet MAS licensing and Fit and Proper requirements in respect of regulated Fund Management activities
• Conceptual Clarity.
• Strong analytical and quantitative skills.
• Highly motivated, dynamic, hardworking and eager to succeed.

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Work Location: Jurong East

Working Hours:

• During term time, Working hours: 7:00am to 4:15pm on Mondays to Fridays (excluding *45min lunch break).
• (b) During school holidays,Working hours: 8:00am to 5:15pm on Mondays to Fridays (excluding 45min lunch break).

Contract Period: 1 January 2025 to 31 December 2025

Job Description

• Prepare teaching resources for Science lessons, including packing materials for experiments and setting up and cleaning experimental/demonstration apparatus as instructed by Science teachers and Level Reps.
• Prepare resources for Science Practical Tests and uphold examination integrity.
• Maintain cleanliness and safety of Science rooms, Maker Studios, and learning spaces (e.g., Ecogarden, Aquaponics, Butterfly Garden).
• Follow safety guidelines for laboratory cleanliness, equipment maintenance, chemical handling, spill response, and disposal of chemicals and biological materials.
• Ensure lab equipment, safety devices, and first aid supplies are in good condition and report any faulty items.
• Supervise laboratory attendants and guide on lab safety practices.
• Support Science/Maker-related CCAs on CCA days (7:30am to 9:00am).
• Manage Maker Studio usage by students during recess and after school, and perform regular maintenance of Science resources and apparatus.
• Conduct internal stock take and notify Science HOD/LH SC of required replacements.
• Maintain stock, breakage, and replacement records.
• Assist HOD/LH Science in external stocktake with ST Engineering personnel and follow-up on actions

Job Requirement

1. Minimum 3 years’ experience working in a school science lab or similar environment.
2. At least 2 years of experience preparing SPARKLES kits for P3 teachers.
3. Strong communication skills for interacting with teachers and children aged 6-12.
4. Knowledgeable in preparing First Aid materials and maintaining safety supplies.
5. Proficient in Microsoft Word and Excel.
6. Experience in tracking and managing computing hardware using basic inventory systems.
7. Preferably 3+ years of front office experience, including answering calls and assisting students.
8. Able to manage multiple tasks efficiently and work well with students and staff.

EA: 22C1322

EAP: R24124011

This advertisement is recruiting for the position of Science Laboratory Assistant & Ahoc Admin Help.

If successfully selected, you will be seconded to MOE primary school located in Jurong East.

Contract Year: from 1 January 2025 to 31 December 2025

Option to Extend: for a further period of 1 January 2026 to 31 December 2026

Personnel to be deployed at the following hours:

week, spread over 5 days.

1. During term time, Working hours: 7:00am to 4:15pm on Mondays to Fridays (excluding *45min lunch break).
2. During school holidays,Working hours: 8:00am to 5:15pm on Mondays to Fridays (excluding 45min lunch break). Stationed at GO to assist in Admin Work *12:45pm – 1:30pm - Lunch

The service required are set out as follows :

The duties and responsibilities of the Science Laboratory Assistant:

1. Prepare teaching resources for Science lessons, EE/LLP level programmes, E2K enrichment classes, i.e., packing of materials needed for experiments, setting up of, clearing away and cleaning of experimental set-ups and /or demonstration apparatus as instructed by the Level Reps and Science teachers;
2. Prepare resources for the conduct of Science Practical Tests and maintain examination integrity;
3. Ensure the maintenance (daily cleanliness and upkeep) and safety requirements of the following Special Rooms / Spaces under the Science Department; - Science Rooms - Maker Studio(s) - Learning spaces (e.g. EE Hub, Outdoor Experiential Learning spaces such as the Ecogarden, Rainwater Harvest system, Aquaponics/hydrophonics system, Butterfly Garden, Gardening areas, etc)
4. Adhere to the following requirement stated in the Safety Handbook:

PART A -

• Maintain a safe and tidy lab environment.
• Display general laboratory safety guidelines clearly for all laboratories.
• Display the evacuation route prominently in each laboratory.
• Ensure that all apparatus and equipment are safe for use.
• Ensure that chemicals are labelled properly in accordance to GHS in Chapter9. -
• Ensure that spills are handled in accordance with guidelines.
• Ensure that chemicals (see Section 11.3.5.) and biological materials (see Section 10.3.7.) are disposed of appropriately.
• Store, use and handle chemical explosive precursors (EP) in accordance with the regulations stated in Section 11.2.

PART B -

• Maintain laboratory equipment, apparatus, PPE, materials and specimens in good working condition.
• Report all faulty machines and equipment immediately, and display an "Out of Order" sign prominently on the machines/equipment.
• Check that safety devices in the laboratory, such as emergency eyewashers, showers and fire extinguishers, are in working condition.
• Inspect gas and water systems and initiate necessary repair or maintenance work.
• Maintain a record or file of the Safety Data Sheets (SDS) that accompany purchased chemicals (see also Section 11.3.1. on the classification of hazardous chemicals).
• Keep a stock book and breakage record and indicate necessary replacement.
• Prepare an inventory of stocks annually.
• Maintain a usage record.
• Check and replenish first aid supplies (see Annex B for the minimum contents of a First Aid Kit).
• Guide or supervise laboratory attendants, or other personnel working in the lab, on laboratory safety.

1. Support Science/Maker-related CCAs on CCA days from 7:30am to 9:00am;
2. Oversee the use of the Maker Studio(s) by students during recess and after school;
3. Carry out regular maintenance of Science resources/apparatus and the SPARKLES Kit;
4. Carry out internal stock take of resources and inform Science HOD/LH SC on stocks to be replaced;
5. Keep record of internal stock-take, breakage record, replacement record;
6. Prepare for and support HOD/LH Science in the physical external stocktake with personnel from ST Engineering;
7. Carry out follow-up actions after external stocktake, guided by HOD/LH SC;

Administrative duties and responsibilities of the Science Laboratory Assistant during school holidays:

1. The School Laboratory Assistant is to perform the following administrative duties: - front desk duties (e.g. handling calls in general office, attending to students) - filing and organising documents - packing of items - assisting ESOs - administration tasks assigned by the Vice-Principal / Admin Manager.
2. To be responsible for the proper maintenance of all the First Aid Boxes in the school

Administrative duties and responsibilities of the Science Laboratory Assistant during term time on an ad hoc basis:

1. The lab Asst will be called upon to assist in the administrative duties listed in item 1 when needed.

NOTE:

• The school reserves the right to vary the working hours according to organizational needs.
• Time worked exceeding the normal working hours, as approved by the Principal, Vice-Principal, Administration Manager or Science Head of Department, would be claimed as time off on a subsequent date to be approved by them.

The personnel shall minimally have the following qualifications, skills and experience:

• Minimal 3 years’ experience working in school’s science room/ science lab, or similar working environment
• At least 2 year’ experience of preparing SPARKLES kit for P3 teachers
• Knowledgeable in preparing First Aid materials
• Good communication skills, in dealing with teachers and children aged 6-12
• Possess knowledge in Microsoft Word and excel
• Experience in tracking, managing computing hardware using simple inventory system • Preferably 3 years or more experience in carrying out front office duties such as answering phone calls, attending to students

6 days work week (Mon-Fri 0900-1800, Sat 0900-1630)

Responsibilities

• Maintain and improve service level.
• Manage operations of workshop.
• Estimate costs and time required for repair or maintenance of the vehicle.
• Educate and instruct mechanic to learn mechanic skills.
• To test and confer with customers to obtain description of vehicle problems and discuss the necessary work to be performed.
• Check the activities in the workshop, inspect completed work and draft reports to detect recurrent faults.
• Plan, organize and coordinate the day-to-day running of the workshop. E.g.Writing work orders (Job sheet) and arranging mechanic to perform maintenance and repair work on vehicles.
• Able know how to use diagnostic tools.
• Able to troubleshoot when problems of car arise.
• Ensure that the vehicle is returned to the owner in a clean condition.
• Any other ad-hoc duties as assigned.

Requirements

• Enjoy interacting and helping clients
• Be able to effectively communicate with clients
• Motivated and driven personality
• Able to multi task
• Interest in automotive industry
• Class 3 driving licence required

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Devon Yang Yue Teng | EA Personnel No.: R24123723

5.5 Days

Monday - Friday ; Saturday

8.30am - 6pm ; 8.30am - 1pm

Office location: Yio Chu Kang

Responsibilities

• Track and monitor maintenance programs and schedules for ongoing effectiveness.
• Conduct inspections to verify that the property is well maintained.
• Oversee emergency and ad hoc repairs, troubleshooting, and breakdown management, providing technical support to the team and coordinating with subcontractors and vendors.
• Prepare monthly reports for management review.
• Plan and manage maintenance services, schedules, and improvement projects to ensure smooth building operations in coordination with the Senior Management team.
• Ensure that the Facilities Maintenance team and external contractors/vendors comply with ISO standards, regulations, and safety guidelines.
• Supervise building systems, including fire safety, landscaping, and mechanical and electrical systems, to ensure safe and smooth operation.
• Coordinate and oversee all M&E administrative tasks by liaising closely with consultants and clients.
• Monitor and address building system breakdowns, defects, and shutdowns.
• Perform additional facilities management duties as assigned.

Requirements

• Minimum 4 years of relevant experience in related Facility Management or equivalent.
• Proficient in Microsoft Office and computer skills.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Devon Yang Yue Teng | EA Personnel No.: R24123723

Monday to Friday

8.30am to 6pm

Office location: Ademco

Position is site based

Responsibilities

• Execution of service and maintenance workflow.
• Liaise closely with client representatives on all service/maintenance related issues.
• Assisting the supervisor in employing teams on service deliveries and distribute responsibilities.
• Manage day-to-day client interactions and expectations for optimal results.
• Provide support to supervisor in ensuring the timely delivery and completion of troubleshoot and service/maintenance of security systems at clients’ premises.
• Familiarise yourself and deliver customer satisfaction base on each client's business, organization and objectives.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required.

Requirements

• Good Senior TO profile but lacking experience will be considered for TO
• For STO: knowledge and hands-on experience in electrical security systems (CCTV, access control system, intrusion detection system)
• Able to do standby duty, be activated to fault calls/maintenance schedule outside of office hours (paid)
• Knowledge in IT/Network/Server is an added advantage.
• Good interpersonal and problem solving skills.
• Independent, self-motivated individual whom is able to work under minimum supervision.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Devon Yang Yue Teng | EA Personnel No.: R24123723

Monday to Friday

730am - 5pm

Location: Tanjong Penjuru

Responsibilities

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas.
• Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary.
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Requirements

• Minimum 5 years working experience in manufacturing environment (main criteria)
• Able to supervise and lead the subordinates.
• 3Willing to work after working hour or during non-working days.
• Able to work under pressure.
• 5Computer literate.
• Knowledge in ISO is an advantage.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Devon Yang Yue Teng | EA Personnel No.: R24123723

The CPPS group is seeking a highly motivated scientist or senior scientist to lead and conduct research in Industry 5.0 smart manufacturing solutions and integrating digital technologies with AI-enabled physical production systems that promote human-centricity, environmental sustainability, and value chain resilience in manufacturing. The ideal candidate should have a strong background in controls and/or automation. Knowledge of PLC programming would be a strong advantage.

The key roles & responsibilities include, but are not limited to the following:

• Research into novel adaptive and autonomous control algorithms for scalable self-learning, self-optimizing and self-recovery production systems
• Working with a team of scientists and engineers to design and implement integrated IIOT and AI-enabled production systems for smart manufacturing
• Formulate scientific research directions and innovative proposals to secure competitive funding
• Understand the autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with industry communication protocols such as OPC-UA, MQTT, Profibus, and RS-232 is needed

Job Requirement:

• PhD degree in Computer Science / Engineering, Electrical Engineering, Mechanical Engineering, with emphasis on controls and/or automation.
• Good track record of scientific publications in top journals or conferences
• Excellent technical presentation and writing skills
• Ability to develop and program PLCs and other control systems, utilizing platforms like TwinCAT, EcoStruxure, Codesys and others is a strong advantage
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

The CPPS group is seeking a highly motivated scientist or senior scientist to lead and conduct research in Industry 5.0 smart manufacturing solutions and integrating digital technologies with AI-enabled physical production systems that promote human-centricity, environmental sustainability, and value chain resilience in manufacturing. The ideal candidate should have a strong background in controls and/or automation. Knowledge of PLC programming would be a strong advantage.

The key roles & responsibilities include, but are not limited to the following:

• Research into novel adaptive and autonomous control algorithms for scalable self-learning, self-optimizing and self-recovery production systems
• Working with a team of scientists and engineers to design and implement integrated IIOT and AI-enabled production systems for smart manufacturing
• Formulate scientific research directions and innovative proposals to secure competitive funding
• Understand the autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with industry communication protocols such as OPC-UA, MQTT, Profibus, and RS-232 is needed

Job Requirement:

• PhD degree in Computer Science / Engineering, Electrical Engineering, Mechanical Engineering, with emphasis on controls and/or automation.
• Good track record of scientific publications in top journals or conferences
• Excellent technical presentation and writing skills
• Ability to develop and program PLCs and other control systems, utilizing platforms like TwinCAT, EcoStruxure, Codesys and others is a strong advantage
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Job Description

SIMTech is looking for a highly motivated, quick learner with excellent interpersonal skills to join Additive Technology Innovation (ATI) Group. The successful candidate will have opportunities to participate in research and industry projects in additive manufacturing (AM) and be involved in a highly challenging and dynamic research and development environment by working with scientists and engineers. The lab officer’s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group’s research activities through procurement, equipment maintenance, risks assessments, including:

• Hand-on work such as preparing, operating and unpacking AM printers.
• Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.
• Tracking and managing lab and group’s resource utilization, procurement, and delivery.
• Storage space management and optimization.
• Ensure high operational readiness by liaising with vendors to troubleshooting breakdowns preventive maintenance, and repairs.
• Facilitating mechanical and electrical installations for new equipment.
• Assist in lab equipment operation, collection of process data and analysis of results.
• Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.
• Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Job Requirements

• Polytechnic / Technical Diploma degree in Engineering.
• Strong hands-on capabilities.
• Meticulous attention to detail.
• Diligent and possess a positive work attitude.
• Good communication skills.
• Proficient in Microsoft Office.
• Open attitude to lifelong learning and adapts well to new technologies.
• In-depth knowledge / hands-on experience in design for additive manufacturing (DfAM), CAD-based modelling, fusion or sinter-based additive manufacturing processing & metallurgy will be an added advantage.

Responsibilities

• Responsible for leading and managing the full life cycle R&D projects and product delivry by planning, organizing, executing and evaluating from conception to completion.
• Ensure successful delivery of project scope and targets while managing project risk, quality, delivery, scope, schedule, and budget.
• Partners with internal and external stakeholders to establish communication plans, build project schedules and establish clear project deliverables and milestones.
• Drive leadership by motivating project team members in the design, development, and delivery of R&D solutions to customers.
• Ability to demonstrate a good level of understanding of technical/engineering processes in order to work with teams throughout the project development cycle
• Track, monitor and report the progress of the project to all stakeholders
• -mplement and manage project changes and interventions to achieve project deliverables and mitigate risk
• Overall project evaluation and assessment of results.
• Establish project lifecycle management procedures and best practices to ensure project teams maintain discipline needed to successfully complete their projects.

Job Requirements

• Bachelor or Masters in any engineering related discipline
• PMP certifications or equivalent is advantageous
• Proven track record of executing multiple successful projects
• At least 3 year(s) of working experience in project management experience in related field (R&D, engineering)
• Strong business acumen, driven to deliver customer requirements and project deadlines
• Outstanding project management capabilities; i.e. planning, risk management, status reporting, budget tracking, stakeholder management, resource management
• Knowledge and understanding of re-manufacturing techniques and limitations
• A team player and technically motivated to solve problems, innovate and deliver to internal and external customers
• Strong communicator with excellent interpersonal skills

Job Description

SIMTech is looking for a highly motivated, quick learner with excellent interpersonal skills to join Additive Technology Innovation (ATI) Group. The successful candidate will have opportunities to participate in research and industry projects in additive manufacturing (AM) and be involved in a highly challenging and dynamic research and development environment by working with scientists and engineers. The lab officer’s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group’s research activities through procurement, equipment maintenance, risks assessments, including:

• Hand-on work such as preparing, operating and unpacking AM printers.
• Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.
• Tracking and managing lab and group’s resource utilization, procurement, and delivery.
• Storage space management and optimization.
• Ensure high operational readiness by liaising with vendors to troubleshooting breakdowns preventive maintenance, and repairs.
• Facilitating mechanical and electrical installations for new equipment.
• Assist in lab equipment operation, collection of process data and analysis of results.
• Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.
• Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Job Requirements

• Polytechnic / Technical Diploma degree in Engineering.
• Strong hands-on capabilities.
• Meticulous attention to detail.
• Diligent and possess a positive work attitude.
• Good communication skills.
• Proficient in Microsoft Office.
• Open attitude to lifelong learning and adapts well to new technologies.
• In-depth knowledge / hands-on experience in design for additive manufacturing (DfAM), CAD-based modelling, fusion or sinter-based additive manufacturing processing & metallurgy will be an added advantage.

Key responsibilities:

* Technical Support:

• Work closely with research scientiest and engineers to support R&D projects in advanced manufacturing technologies.
• Identify and recommend appropriate characterization techniques, test standard and methodology for projects.
• Perform sample preparation, equipment operation, data collection and report for metallurgical analysis, materials characterization and measurement.
• Operate and maintain analytical and test equipment, such as cross-section polisher, optical microscope with image processing software, mechanical tester, profilometer and spectrometers.

* Lab Management and day-to-day operations

• Maintain lab equipment in good working condition, lab consumables are adequately stocked and well managed.
• Source and purchase new equipment, modules and accessories.
• Prepare and update lab safety document RA/SWP. Implement and maintain 5S in the lab.
• Provide training and advice for lab equipment users.

Requirements:

• Diploma in Materials, Chemistry, Mechanical Engineering, or equivalent.
• Good communication skills.
• Self-motivated with a positive work and learning attitude.
• Team player who thrives in a collaborative environment

Key Responsibilities:

• Prepare and organize laboratory materials, reagents, and samples for experiments.
• Assist in the setup and operation of lab equipment such as precision milling machine, laser cutting machine and 3D printing machine.
• Set up and calibrate laboratory equipment and instruments.
• Conduct routine maintenance and cleaning of laboratory equipment.
• Monitor inventory levels of laboratory supplies and place orders for replenishment when necessary.
• Assist scientists and engineers in research projects and training courses, contributing to experiments and investigations.
• Collect, record, and analyse experimental data using laboratory techniques and instrumentation.
• Prepare and maintain detailed records of experimental procedures, observations, and results.

Qualifications and Skills:

• Certificate or diploma relevant to Computer Numerical Controlled (CNC)
• Previous experience working in a laboratory setting, preferably in a research or academic environment.
• Familiarity with laboratory equipment and instrumentation such as milling machine and microscopes.

We value the following soft skills:

• Strong attention to detail and accuracy in performing laboratory tasks and recording data.
• Strong organizational skills and the ability to multitask effectively in a fast-paced environment.
• Good communication skills and the ability to work collaboratively in a team-oriented setting.
• Knowledge of laboratory safety protocols and procedures.

Are you passionate about electrochemistry and surface technologies, and eager to make an impact in a cutting-edge research environment? Join our team as a Lab Officer (surface technology) and play a critical role in managing our state-of-the-art surface laboratory. In this exciting position, you'll be at the heart of innovative research, supporting project teams with your technical expertise, organizational skills, and proactive problem-solving abilities. You will oversee the lab's daily operations, support experimental activities, and contribute to groundbreaking electrochemical and surface technology R&D.

Job Description:

The Laboratory Officer will be responsible for managing day-to-day operations within the electrochemical lab and providing essential support to ongoing projects. The role requires a good level of technical proficiency in electrochemical techniques, excellent organizational skills, and a proactive approach to problem-solving. The Laboratory Officer will work closely with the project teams to ensure smooth and safe functioning of the lab and timely completion of tasks. Key responsibilities include:

Lab Management:

• Oversee the day-to-day operations of the electrochemical lab, including equipment maintenance, inventory management, and safety protocols.
• Ensure that the lab is well-equipped and stocked with necessary materials and supplies for ongoing experiments and projects.
• Coordinate with vendors for procurement of equipment/chemicals and supplies as needed.
• Maintain a clean and safe working environment in accordance with laboratory standards and regulations.

Experimental Support:

• Assist researchers and project teams with experimental setup, data collection, and analysis.
• Characterizations of surfaces and coatings in terms of mechanical, physical and chemical properties, as well as coating performance evaluation.
• Troubleshoot technical issues and provide guidance on experimental procedures as required.
• Conduct routine calibration and maintenance of electrochemical equipment to ensure accuracy and reliability of results.
• Document experimental procedures, results, and observations in detailed lab reports.

Project Support:

• Collaborate with project teams to support the execution of research projects related to electrochemical applications.
• Manage project timelines and deliverables to ensure that milestones are met in a timely manner.
• Communicate regularly with project stakeholders to provide updates on progress and address any concerns or challenges that arise.

Training and Development:

• Provide training and guidance to new lab members on proper laboratory techniques, safety procedures, and equipment operation.
• Stay informed about advancements in electrochemical technology and techniques through literature review and professional development activities.
• Share knowledge and best practices with other members of the research team to enhance overall productivity and efficiency.

Job Requirements:

• Diploma or equivalent qualification in Chemistry, Chemical Engineering, Materials Science, or a related science and engineering field.
• Proven experience working in a laboratory setting, preferably with a focus on electrochemistry.
• Strong understanding of electrochemical principles and techniques, including cyclic voltammetry, impedance spectroscopy, and potentiostatic/galvanostatic measurements.
• Proficiency in operating and troubleshooting electrochemical equipment such as potentiostats, electrochemical cells, and electrodes.
• Excellent organizational skills and attention to detail, with the ability to manage multiple tasks simultaneously and prioritize effectively.
• Strong communication and interpersonal skills, with the ability to work collaboratively in a team environment.
• Commitment to maintaining a safe and compliant laboratory environment, with knowledge of relevant safety regulations and procedures.
• Flexibility to adapt to changing project requirements and priorities, with a proactive approach to problem-solving.
• Ability to work independently with minimal supervision, while also contributing effectively to a dynamic research team.

Note: Some of above requirements are optional but advantageous to have.