This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Key Responsibilities:

• Work with the team to build pipelines on Platform on data can be processed effectively

• Organize the database such that all clinical data are linked and easily retrieved - Build the pipelines for federated data sharing

• Data Analysis: Perform data analysis and visualization work to support research projects, grant applications, and publications

• Database Management - Manage the database used to host our clinical data to ensure that it is maintained operationally in a cost-effective manner

• Perform data cleaning, data standardization, and data structuring for data in the database

• Coding work required

Requirements:

• At least BSc in a relevant field (biology or bioinformatics or computational science)

• Possess an understanding of medical and clinical research terminology

Interested candidates please send in your resume to:

[email protected]

EA Personnel: Valerie Yong Kian Fung

CEI No.: R1103704

Recruit Express Pte Ltd, EA License No.: 99C4599

The successful applicant will be involved in a multidisciplinary and collaborative research study on the built environment and mental well-being. He/She will investigate how the urban environment, such as neighbourhood design, heat stress and noise pollution, can influence the positive and negative aspects of mental well-being in families. The candidate will also be involved in longitudinal cohort studies and collaborations with clinicians and researchers from a wide range of disciplines.

1. Data management and analysis of data
2. Combine a thorough examination of the literature with study results to answer scientific questions and hypothesis
3. Assist with preparation of scientific publications, data reports, grants and presentations
4. Perform measurements, collection of data and samples as well as field and experimental work
5. Assist with other administrative duties

Job requirements

• Degree in Biomedical Sciences, Bioinformatics, Architecture, Statistics, Geography, Real Estate, Urban Planning or a closely related field
• No experience required or applicants with relevant project experience are welcome
• Highly self-motivated with excellent communication and writing skills.
• Proficient in Microsoft Office and statistical program.
• Strong desire to learn in a dynamic multi-disciplinary research environment.
• Previous experience with geospatial analysis, managing and analyzing data sets and/or in bioinformatics will be preferred.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Provides assistance to the research team

• Screens and recruits suitable patients to participate in the research project

• Briefs patients on research background and rationale and to obtain their consent of participation

• Collects data from patients' medical records and research statistics

• Helps document adverse events / reactions that arise

• Performs phlebotomy and venepuncture when required

Requirements:

• Minimum Degree/ Diploma in Nursing

• Min 3 years’ experience in Hospital

Only Nurses with SNB license NEED APPLY

Interested candidates please send a copy of your resume in MS Word to

[email protected]

EA Personnel: Valerie Yong Kian Fung (R1103704)

Company Reg. No. 199601303W

EA Licence No. 99C4599

Responsibilities:

• Provides assistance to the research team

• Screens and recruits suitable patients to participate in the research project

• Briefs patients on research background and rationale and to obtain their consent of participation

• Collects data from patients' medical records and research statistics

• Helps document adverse events / reactions that arise

• Performs phlebotomy and venepuncture when required

Requirements:

• Minimum Degree/ Diploma in Nursing

• Min 3 years’ experience in Hospital

Only Nurses with SNB license NEED APPLY

Interested candidates please send a copy of your resume in MS Word to

[email protected]

EA Personnel: Valerie Yong Kian Fung (R1103704)

Company Reg. No. 199601303W

EA Licence No. 99C4599

Highlights

• 2 days off + AWS + VB (Central)
• Programme: Maths, Science, STEAM Programming
• Target Student: Age Group 5 – 12
• Teacher/ Tutor/ Instructor/ Trainer

Main Responsibilities

• Prepare and deliver engaging lessons in accordance with the enrichment centre’s curriculum.
• Create a positive and supportive learning environment that encourages student participation and promotes creativity.
• Establish and maintain good relationships with students and parents; provide regular updates to parents on students’ performance and progress
• Collaborate with colleagues & assistant to enhance curriculum development and teaching methods.
• Maintain accurate records of students’ attendance, performance, and achievements.
• Attend staff meetings, training sessions, and other professional development activities provide & collaborate with Japan HQ as required.
• Ensure centre management and the safety and well-being of all students.
• Perform all administrative and other duties as assigned.

Requirements

• Bachelor’s degree in Education/ Teacher Certificate, Diploma or other Teacher Accreditation courses and certification, or relevant field.
• Prior experience teaching in an enrichment centre or similar educational setting.
• 1-2 year of proven experience in teaching mathematics/ science at the primary or early secondary school level.
• Strong classroom management skills and ability to engage young learners effectively.
• Passion for education and commitment to the academic and personal development of students.
• Excellent communication and interpersonal skills.
• Familiar with Singapore’s education system and curriculum frameworks (PSLE & early Secondary).

HOW TO APPLY:

Interested applicants, please email to “[email protected]”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Pierre Chung Yih Shern
EA Personnel Reg No: R22111092

Job Description:

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Period: 36 months
• Start from: January 2024

Requirement:

• Min Diploma in Civil Engineering or equivalent
• At least 4 years of relevant experience in supervision of residential buildings
• Resident Technical Officer Certificate accredited by IES / ACES
• Knowledge and Experience in institutional
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

Job Scope

• Adapt and implement lesson plans following established guidelines and methodology to optimise the curriculum's effectiveness in achieving learning outcomes.
• Conduct interactive and dynamic classroom sessions that actively engage students, promoting critical thinking and active participation.
• Support any curriculum related work
• Evaluate students' progress and tailor recommendations and personalised plans based on their unique learning needs, leveraging learning analytics.
• Provide regular updates and feedback to parents, ensuring they are well-informed about their child's academic progress.
• Provides 1-to-1 consultations through an in-house messaging platform to address students’ academic needs outside of the classroom.

Requirements

• Processess a minimum of a Bachelor's degree
• While teaching experience is preferred, it is not compulsory
• We are open to enthusiastic educators who are quick learners and have a passion for education.
• Display an energetic and dynamic personality that fosters an engaging and inclusive classroom environment
• Demonstrate proficiency in delivering captivating and impactful lessons that cater to diverse learning styles.
• Exhibit dedication and a proactive attitude in supporting student growth and progress.
• Possess a strong ease and familiarity with technology.

Full Time Work Schedule:

• 3 weekdays + 2 weekends (12pm to 9pm / 9am to 6pm) OR
• 2 weekdays + 2 weekends (12pm to 9pm / 9am to 6pm)

Freelance:

• Weekdays - 3.30pm to 9pm
• Weekends - 9am to 6pm

Imperial Global Singapore – NH3-SOFC – Assistant Programme Director

Location: Singapore

Salary: S$12,000 – S$14,000, Monthly dependent on experience, plus performance related bonus

Hours: Full Time

Imperial Global Singapore, Imperial College London’s formal research and innovation entity in Singapore, is seeking an experienced senior postdoctoral research assistant as an Assistant Programme Director for the NH3-SOFC research programme on development of direct ammonia solid oxide fuel cells. This programme represents a new and timely collaboration between the United Kingdom and Singapore and will be based at Imperial Global Singapore (IGS) offices, located on the campus of the National University of Singapore. This senior role will be responsible for leading the coordination of the NH3-SOFC research team, working across materials science, device engineering, electrochemistry, and in collaboration with the Programme Co-Directors based at both IGS and Nanyang Technological University.

The programme aims to develop solid oxide fuel cells that can effectively and efficiently use ammonia directly as a fuel source while maintaining high performance and durability. To overcome challenges related to material compatibility, anode degradation due to nitrification, slow chemical/electrochemical processes, and performance loss, the research will explore new materials, catalysts, and cell designs. There will be two cell types of interest in this programme: i) oxygen-ion and ii) proton-conducting ceramic membrane electrolytes. The project will span the length scales, from materials discovery, including with computational approaches, through mechanical properties and microstructure optimisation to incorporation into short stacks for durability testing.

The Assistant Programme Director will be tasked with leading the coordination of the research team based at IGS, coordinating with the NTU based team in collaboration with the work package leads and contributing to management of the programmes finances and reporting requirements by working closely the IGS Associate Director. In addition, the appointee will be expected to lead an independent programme of research developed in collaboration with the Programme Director.

Full Job Description: https://www.imperial.ac.uk/media/imperial-college/administration-and-support-services/international-relations-office/public/imperial-global-singapore/IGS---SOF-C---Job-Description---Assistant-Programme-Director.pdf

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Please apply here: Assistant Programme Director Application form

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 31 January 2025.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Professor Stephen Skinner [email protected].

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Working hours: 3 rotating shift work (3 rest day every 2 weeks)

Morning – 7am to 4pm

Afternoon – 2pm to 11pm

Night – 10.30pm to 7.30am (night shift allowance at $14/night)

Location: CBD area

BASIC + AWS + PERFORMANCE BONUS!

Responsibilities

• Perform daily operational activities which includes attending to customer's enquiries, needs and complaints.
• Perform preventive and breakdown techinical support and maintenance for mechanical/electrical services, plumbing & sanitary services, Aircon servicing and maintenance, ACMV systems, chillers and electrical control.
• Perform electrical related work for all Low and High voltage systems, and preventive & breakdown technical support.
• Inspect and maintain site electrical equipment.

Requirements

• Candidate must possess Licensed Electrical Worker (LEW) Certified Grade 7
• Recognized techincal certificate in Mechanical & Electrical, Building Services, Facility Technology or its equivalent.
• Candidates with WSQ qualifications are welcome to apply.
• Possess hands on and technical knowledge with minimum 3 years' experience in Facilities Management.
• Able to perform shift work

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

6 Days Work Week

Off days are not fixed

Company van is provided

Incentive of $2000 if target hit! + AWS + VB + ALLOWANCES

Operations

• Led a team of Senior Managers and Foodcourt Managers to achieve sales targets and overall outlet performance.
• Guided Senior Managers, Foodcourt Managers, and F&B Supervisors to ensure smooth daily operations of food courts and coffee shops.
• Provided leadership and set directions, ensuring the operation team adhered to company SOPs and operational workflows.
• Maintained good working relationships with landlords, relevant authorities/agencies, and stall tenants.
• Assisted inspectors from authorities such as NEA, SFA, and Civil Defense during inspections and follow-up actions.
• Liaised with landlords on building matters, joint promotions, and events.
• Marketed food stalls to tenants and ensured prompt rental collection from tenants.
• Managed lease renewal agreements, negotiated terms, and followed up with stall tenants.
• Sourced qualified tenants and food types to fill vacant stalls, ensuring all stalls were occupied.
• Proposed activities based on market needs.
• Took immediate and appropriate actions for debt recovery (e.g., stall rental) to minimize credit losses.
• Handled daily sales settlements.
• Collaborated with Business Development and Project teams to identify potential new business opportunities, sites, and oversee the build and renovation processes.
• Ensured the financial and operational performance of designated food courts and coffee shops.
• Worked with senior management and the financial team on outlet budgets.
• Established overall business plans and provided regular performance, sales, and financial budget reports to senior management.
• Provided solutions to improve the bottom line and outlet P&L.
• Maintained and improved established quality and service standards.
• Developed employees by providing ongoing feedback and establishing performance expectations.
• Conducted regular checks on hygiene, service standards, and product quality, providing feedback internally and to stall tenants.
• Ensured stall selling prices were in accordance with agreements.
• Assessed and evaluated stall tenant performance.
• Supervised and guided stall tenants and cleaning contractors to achieve high service quality and housekeeping excellence.
• Conducted weekly and monthly outlet meetings.
• Ensured M&E works were completed according to schedule.

Administration

• Reviewed staff performance and provided recommendations on staff confirmation, promotion, and training to enhance work performance.
• Handled disciplinary issues, grievances, disputes, and team tensions.
• Managed termination procedures according to company guidelines.
• Communicated company policies and procedures effectively to team members and stall tenants.
• Accountable for outlet float money, petty cash, and daily sales collection.
• Ensured stall tenants’ daily sales were accurately received and banked.
• Submitted timely outlet reports.
• Prepared and submitted monthly reports to Senior Management.
• Ensured proper cost control on all expenses according to budget.
• Took necessary actions against stall tenants and contractors for service, housekeeping, and agreement non-conformance.
• Performed any other assigned tasks.

Requirements

• With passion in working F&B industry and its operational processes.
• Minimum 5 years’ experience in Foodcourt operation
• Ability to foster positive working relationships
• Strong leadership quality with excellent analytical and decision-making skills
• Basic computer literacy including Microsoft Office and Google Suite
• Must possess Class 3 license

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

Working hours: 5.5 working days

8.30am to 5.30pm, 8.30am to 12.30pm

Location: CBD area

Basic + AWS + Performance Bonus!

Responsibilities

• To carry out all preventive and breakdowns maintenance for all Aircon equipment.
• Ensure safe keeping of hand tools and maintain good housekeeping.
• Ensure all works are carried out safely and/or in accordance with safety procedures.
• Provide technical advice and assistance on all maintenance functions.
• Any other tasks, when required by immediate superior.
• Prepare service reports after every completed job for customer's endorsement.
• Communicate with clients with regards to problems in equipment and post-job reports.
• Any ad-hoc tasks given by supervisor or management.

Requirements

• At least 2 years of related techinical experience in chillers, ACMV equipment, switchboard and generators will be an advantage
• Positive attitude, good interpersonal and customer-centric skills.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

Monday - Friday
8.15am - 6.30pm

Basic + AWS + VB

Responsibilities

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints. • Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues. Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives. • Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements

• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus. Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

Monday to Friday
9am to 6pm

Basic + Transport Allowance + Commission + AWS + VB

Responsibilities

• Identify and pursue potential clients through lead generation and networking.
• Present services, negotiate contracts, and close deals to secure new business.
• Build and maintain strong relationships with existing clients, addressing inquiries and concerns.
• Stay informed about industry trends, market conditions, and competitors.
• Develop strategies for expanding market presence and entering new regions or industries.
• Understand client logistics requirements and tailor solutions accordingly.
• Create and deliver sales presentations and marketing materials.
• Generate accurate and competitive quotations and proposals.
• Maintain records of sales activities and provide regular reports to management.

Requirements

• Sales experience in freight forwarding / logistics industry, min 1 year
• 6 months probation
• Hunter role

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

Mon - Fri 830am - 6pm

Location: Havelock

BASIC + AWS + PERFORMANCE BONUS + TRANSPORT + HP ALLOWANCE

Responsibilities

• Oversea the whole process of service cum maintenance workflow
• Frontline contact with client representatives on all service/maintenance related issues
• Lead a team of service team members
• Prepare service scope and develop service plans, define resource loading, skill requirements, tracking milestones and metrics
• Determine new, creative ways to employ teams on service deliveries and distribute responsibilities
• Manage day-to-day client interactions and expectations for optimal results
• Continually seek and capitalise upon opportunities to increase customer satisfaction and deepen client relationships
• Possess a knowledge base of each client's business, organisation and objectives
• Be responsible for operationally managing multiple aspects of the team
• Ensure smooth progress and timely delivery and completion of maintenace commitments to clients
• Perform a wide variety of technical and non-technical tasks

Requirements

• Hands-on experience in security systems such as integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV Systems is a must
• Hands-on experience in security system configuration, application programming and integration with third-party systems will be an advantage
• Technology savvy (hardware & software)
• Excellent problem solving skills
• Strong verbal and written communication skills
• Must be a team player
• Customer service and business orientated with good initiative and adaptability

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

Salary: up to $3600

Duration: 6 months contract

Working Days & Hours: Mon-Fri Office Hours

Location: Science Park

Job Description:

- Participates in improvement initiatives and team building activities within customer service and across functional areas of core integration.

- Accurately process high volumes of part orders and service requests, including but not limited to part location and price determination, accurate cost and revenue account reflection, regular follow up with engineers and inventory management to ensure the customer's needs are met successfully and promptly.

- Prepares accurate pricing of part orders and returns based on factors such as foreign currency conversion rates, contract type and coverage, special customer discounts, part type category and subjective data from field service engineer as to reason for current part issue.

- Ensures accurate cost and revenue account are associated with parts, labor and expenses on each call, which requires solid understanding of cogs accounts, service types and service areas both internal and external.

- Determines shipping method based on numerous factors including part size and weight, contractual agreements with the customer, severity of system issue, and preferred carrier.

- Acts as customer liaison with Accounts Receivable to determine billing issues and find resolution.

- Maintains professionalism in working relationships with team, customers and others within the company.

- Ensure all areas of personal responsibility are handles promptly, accurately, and with outstanding customer service.

-Ad-hoc tasks/duties assigned by Superior

Job Requirements: Min Diploma/Degree in Supply Chain/Logistics/Business or similar w min 2 yrs of relevant order fulfillment experience, preferably in medical device/pharma

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Monday to Friday ; 8.30am to 5.30pm

Transport Allowance $150
HP Allowance: $50

Minimal OT (2 Weekdays a week, predecessor about $30-$100 OT a month)

Eligible for June bonus (1 months) + December bonus (1 month)

Responsibilities

• Provide chauffeur services for the boss and family members.
• Drive the boss to appointments, meetings, and other engagements.
• Pick up the vehicle from the boss's premises or the company as required.
• Safely operate the vehicle and transport the employer to various locations.
• Adhere to all traffic rules and regulations.
• Maintain the employer's vehicle, including regular cleaning, fueling, and coordinating maintenance or repairs (washing the vehicle at the boss’s premises 2-3 times a week, and daily vacuuming of the interior).
• Perform ad-hoc tasks as assigned.

Requirements

• Class 3 driving license and good communication skills.
• Able to work overtime 2 weekdays a week and must be punctual.
• Minimum of 2 years of experience as a personal/company driver (mandatory).
• Regular cleaning of the vehicle, including washing the vehicle at the boss’s premises 2-3 times a week (depending on the schedule) and vacuuming the interior.
• Ensure the tissue box and drinks in the car are replenished.
• OT forms must be submitted daily for sign-off, not just at the end of the month.
• Required to maintain a logbook documenting the distance traveled daily, fuel refills, etc.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

Working hours: 3 rotating shift work (3 rest day every 2 weeks)

- Morning – 7am to 4pm

- Afternoon – 2pm to 11pm

- Night – 10.30pm to 7.30am (got night shift allowance at $14/night) Entitled to OT

Location: CBD area

Basic + AWS + Performance Bonus!

Responsibilities

The Facilities Techinican ensures that facilities are safe and functional by performing preventive and corrective maintainance activities. He/She conducts technical troubleshoooting for mechanical and electrical issues in compliance with the quality and safety standards, regulations and organizational Workplace safety and Health (WSH) practices.

• Perform daily operational activities which includes attending to customer's enquiries, needs and complaints.
• Perform preventive and breakdown techinical support and maintenance for mechanical/electrical services, plumbing & sanitary services, Aircon servicing and maintenance, ACMV systems, chillers and electrical control

Requirements

• 2 years or more related experience in Facilities Management will be an added advantage.
• Positive attitude, good interpersonal and customer-centric skills

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

Job description

Nanomatics, a cutting-edge startup revolutionizing plastic waste management, is seeking a Research Engineer with background in manufacturing and engineering. The candidate will lead research and development activities at Company’s manufacturing research facility (demonstration plant) for plastic waste upcycling.

Responsibilities

1. Contribute to research and development work at a manufacturing research facility (demonstration plant) through experiments including:

- Plastic waste conversion into various products.

- Analysis of energy and material balances.

- Evaluation of process performance.

- Implementation of modifications and improvements to original design.

- Documenting activities and data obtained.

- Development of improved processes for material handling, treatment and storage.

2. Ensure adherence of operations to all regulatory and statutory requirements, especially, workplace health and safety practices. Liaise with safety officer and operation teams to prepare and maintain up to date relevant work permits, risk assessments, safe work procedures and method statements.

3. Organize, monitor and ensure that manufacturing research facility is operated with maximum efficiency at minimum cost.

4. Perform routine checks and process control to ensure smooth operation and keep relevant records of these activities.

5. Maintain and improve housekeeping. Ensure that waste, chemicals, product handling equipment and assigned areas are kept clean.

6. Assist with other tasks as directed by a supervisor and company management.

Requirements:

1. Degree or Diploma in Chemical Engineering, Mechanical Engineering, Manufacturing or related field of study. Fresh graduates will be considered, although work experience in manufacturing will be beneficial.

2. Hands-on experience including: metal design and fabrication, using hand tools (non-powered and powered), minor repairs and maintenance of equipment, day-to-day troubleshooting of machinery/equipment.

3. Strong verbal and written communication skills in English to communicate with other team members and workers.

4. Software knowledge: MS Office, Google Docs, Autodesk (Fusion).

6. Fit to wear dust mask/gas respirator.

7. Prepared to work in Tuas area (near Tuas Crescent MRT).

8. Resilient to noise, dust and heat at the manufacturing site.

Job Description

• Responsible for the academic development ensure quality of teaching and teaching staff properly adopt the curriculum framework
• Customize curriculum, assessment to develop new and innovative educational programme and teaching methodology
• Conduct reviews and evaluate curriculum make recommendations for improvement
• Conduct workforce planning and identify manpower capability needs
• To create a high performance energy learning atmosphere at the center by leading motivate teaching team
• Collaborate with training team to participate in classroom observation and provide coaching to teaching team to enhance teaching standards
• Collaborate with Admin team on schedule of the staff, provide resources for classes and covering for staff absences

Requirements

• Degree or Master Degree in Science / Math or relevant educational fields
• 5 years of leadership experience and prior experience in 5 years of teaching fields
• Supervisory experience required
• Good understanding of educational sector
• Ability to inspire and motivate your team
• Sound decision-making and problem-solving skills
• Willing to work on weekends

Conveyancing Secretary

Salary: $3000 - $3500

Working Days & Hours: Mon - Fri (8.30am to 5.30pm)

Working Location: Cantonment Rd 089742

Job Responsibilities:

• Provide administrative supports including claims, searches, billing, keeping deadlines and attending to general queries;
• Handling conveyancing related matters ie sale, purchase of private properties
• Review and proofread documents relating to conveyancing matters
• Handle incoming and outgoing mail/telephone calls and correspondence with clients to receive instructions
• All other secretarial / administrative duties assigned

Job Requirement:

• Relevant Experience

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Responsibilities:

• Provides assistance to the research team

• Screens and recruits suitable patients to participate in the research project

• Briefs patients on research background and rationale and to obtain their consent of participation

• Collects data from patients' medical records and research statistics

• Helps document adverse events / reactions that arise

• Performs phlebotomy and venepuncture when required

Requirements:

• Minimum Degree/ Diploma in Nursing

• Min 3 years’ experience in Hospital ward

Only Nurses with SNB license NEED APPLY

Interested candidates please send a copy of your resume in MS Word to

[email protected]

EA Personnel: Valerie Yong Kian Fung (R1103704)

Company Reg. No. 199601303W

EA Licence No. 99C4599

Job Description

An internship position for a student with manufacturing, chemical and/or mechanical background to obtain training in research and development, operations of demonstration plant, workplace health and safety in manufacturing environment for sustainable waste management.

Intern’s duties include:

1. Contribute to research and development activities at a manufacturing research facility (demonstration plant) through planned experiments and equipment operations.

2. Follow regulatory and statutory requirements, especially, workplace health and safety practices. Contribute to preparation and maintenance of process documentation, such as permits to work, risk assessments, safe work procedures and method statements.

3. Support site operation activities as directed by a supervisor.

4. Maintain and improve housekeeping. Ensure that waste, chemicals, product handling equipment and assigned areas are kept clean.

5. Resolve product quality issues arising from production or operation by working closely with team members.

6. Assist with other tasks as directed by a supervisor and company management.

Requirements for the intern:

Pursuing Diploma from a Poly or Bachelor or Master’s degree from University in Manufacturing, Chemical or Mechanical Engineering in Singapore.

Has hands-on experience with hand tools, minor repairs and maintenance of equipment, day-to-day troubleshooting of machinery/equipment..

Proficient with MS Office.

Strong verbal and written communication skills.

Good analytical and problem-solving skills.

Familiar with 3D CAD software: preferably, Autodesk Fusion.

Able to follow Workplace Safety and Health regulations. Having safety training certificates is an advantage.

Fit to wear dust mask/gas respirator.

Prepared to work in Tuas area.

Job Summary

A Postdoctoral position is available at the Berkeley Education Alliance for Research in Singapore (BEARS) with Assistant Professor Yanwei Lum. The goal of the project is to develop electrochemical systems for CO2 conversion and work with high sensitivity analytical tools that would be amenable for high throughput screening and reaction mechanism investigation. The candidate is expected to build model catalyst systems to investigate hypothesis and validate existing theories. They will also work in the framework of a larger team at BEARS for high throughput analysis and screening. It is expected that these will eventually lead to rationally designed catalysts for electrochemical CO­2 reduction.

Duties & Responsibilities

1. Perform materials synthesis and characterization.
2. Carry out electrochemical studies to determine electrocatalyst performance.
3. Perform product analysis and quantification using methods such as GC, HPLC and NMR.
4. Perform mechanistic studies of electrochemical CO2 reduction mechanisms.
5. Work with high sensitivity chemical analysis equipment.

Qualifications

Candidates must have obtained a PhD in Chemical Engineering, Chemistry, Materials Science and Engineering or related fields.

Candidates are required to have the following skillsets:

1. Materials synthesis for a variety of solid inorganic materials as electrocatalysts through various synthesis procedures.
2. A strong understanding and extensive experience in electrochemistry and electrocatalysis is a must
3. Working knowledge and experience in GC, NMR and HPLC.
4. Experience in operando catalyst studies (e.g. in-situ Raman, FTIR and etc)
5. At least 1-2 Publications in top tier journals (IF > 10)