Nanyang Environment and Water Research Institute, NTU is looking for a Research Fellow with expertise in heterogeneous catalysis to develop improved catalyst formulations for conversion of plastic waste into carbon nanotubes and hydrogen.

The project is funded by National Environment Agency, Singapore to address one of the largest problems in waste management – the problem of plastic waste pollution. A significant fraction of plastic waste has substandard quality for mechanical and chemical recycling even after sorting and cleaning. The Research Fellow will use pyrolysis-chemical vapor deposition (CVD) technology for converting these plastic waste streams (specifically, contaminated and rejected plastics) into multi-walled carbon nanotubes (MWCNTs) and hydrogen. The role of Research Fellow is to develop catalysts that will allow to reduce catalyst cost and increase carbon nanotubes yield to make the process more economically viable.

Key Responsibilities:

The candidate will be undertaking full research work and administrative duties during the term of employment within the following areas:

• Catalyst formulation and testing in pyrolysis-CVD process;
• Liaising with toll manufacturers regarding the feasibility of scaled up catalyst production.
• Cost-benefit analysis for the developed catalyst(s).
• Publishing research papers and documenting developed intellectual property. Reporting the progress to stakeholders (internal and external).

Job Requirements:

• Ph.D. degree in a field relevant to heterogeneous catalysis (e.g., Chemical Engineering, Materials Science, Environmental Engineering or other).
• PhD thesis or postdoctoral experience related to heterogeneous catalysis for at least one of the following areas: (a) catalytic waste conversion into carbon nanotubes and hydrogen, (b) catalytic single-walled and/or multi-walled carbon nanotube synthesis from any feedstocks.
• First-author publications in the areas mentioned above.
• High proficiency in English (e.g., TOELF, IELTS, GRE) for preparation of research papers
• Ability to prepare well-written technical reports and research papers.
• Ability to prepare decent quality presentation decks, figures and illustrations.
• Ability to build formal and informal partnerships and work collaboratively with others to meet shared objectives.
• Ability to consistently achieve results even under challenging circumstances and understanding what needs to be done to deliver the project.

We regret to inform that only shortlisted candidates will be notified.

About the position

Based in Singapore and supporting Singapore, Indonesia and Malaysia, you will contribute to the firm, by developing analysis and conveying insights to enhance clients’ decision making. You will play an active role in all aspects of client engagement: helping identify issues, forming hypotheses, conducting analysis, and synthesising conclusions into recommendations.

You will combine technical strength with a strong track record of leadership and performance in team-oriented environments.

You will work in a dynamic, intellectually stimulating, and demanding yet supportive environment. You will enjoy autonomy, the opportunity to substantially influence major decisions in the energy sector, and to grow into an industry expert under the guidance of senior members of the team with deep experience addressing major strategic issues at the world’s leading advisory firms.

The position suits a recent STEM graduate of a bachelor’s or master’s programme.

Key responsibilities

• Develop timely and rigorous quantitative analyses to enhance clients’ decision making
• Work closely with our modelling team, structuring economic problems into quantifiable analyses and deriving insights from the model results
• Contribute to our product development, by identifying new opportunities and expanding our capabilities
• Engage with clients to thoroughly understand their requirements
• Communicate findings to clients

What we are looking for

Required attributes:

• First-class or high second-class degree in a quantitative subject (Mathematics, Economics, Science, Engineering or Finance).
• Proficiency in English and Malay language is a must to be able to collect data and information from Singapore, Indonesia and Malaysia.
• Ability to analyse and interpret complex quantitative data and information.
• Evidence of strong performance in team-oriented environments.
• An ability to communicate and collaborate with both technical and non-technical parties.

What we offer

• The opportunity to substantially influence major decisions in the energy sector.
• Direct engagement with clients through Aurora conferences, workshops and webinars.
• The opportunity to grow into a publicly visible industry expert.
• A fun, informal and international work culture.
• Private medical insurance
• Access to employee discount platform - Perkbox
• Access to the Aurora Academy, our training programme offering a range of opportunities to develop your skills
• Access to our Employee Assistance Programme (EAP), offering a complete support network that offers expert advice and compassionate guidance 24/7/365, covering a wide range of personal and professional aspects.

The Company is committed to the principle that no employee or job applicant shall receive unfavourable treatment on grounds of age, disability, gender reassignment, race, religion or belief, sex, sexual orientation, marriage and civil partnership and pregnancy and maternity.

About us

From its academic roots, Aurora Energy Research has grown to be the largest dedicated power market analytics company in Europe, providing data-driven intelligence for strategic decisions in the global energy transformation. We are a diverse team of 600 experts with vast energy, financial, and consulting backgrounds, covering power, renewables, hydrogen, carbon, and fossil commodities.

We are active across in Europe, the Asia-Pacific region, and the Americas, working with world-leading organisations to provide comprehensive market intelligence, bespoke analytic and advisory services, and cutting-edge software. We are a thriving, rapidly growing company with offices across the globe and more opening soon. We currently serve around 200 of APAC’s most influential energy sector participants, including utilities, investors, and governments, and expect to continue to grow rapidly, adding new countries and products to our portfolio.

Job Description:

We are seeking for a skilled and motivated Quantitative Research Analyst to join our Quantamental Investment team. The successful candidate will play a key role in the development and implementation of quantitative trading and investment strategies. As a Quantitative Research Analyst, you will have the opportunity to work on cutting-edge research projects and contribute to the success of our investment strategies.

Key Responsibilities:

• Conduct thorough backtesting of trading strategies using historical market data to evaluate performance, identify potential risks, and validate assumptions.
• Demonstrate proficiency in calculating and backtesting various factors that drive stock returns, including but not limited to value, momentum, size, quality, and volatility. Identify and research new factors or alpha signals that have the potential to generate superior risk-adjusted returns, conducting rigorous analysis to validate their efficacy and robustness.
• Monitor and analyze real-time market data, news, and events to adapt trading strategies and make informed investment decisions in dynamic market conditions.
• Document research methodologies, findings, and results in clear and concise reports, presentations, and research notes for internal stakeholders and clients.
• Mentor junior members of the research team and provide guidance on quantitative methods, programming techniques, and best practices.

Requirements:

• A bachelor's degree or higher in a quantitative field such as Quantitative Finance, Mathematics, Statistics, Computer Science, or a related discipline.
• No prior experience required in the equity market, with a strong background in factor investing strategies. Candidates with experience in China A-share market and US market are preferred.
• Proficiency in programming languages and tools such as Python, SQL, SAS, and C++.
• A keen interest in investment, strong learning ability, excellent teamwork skills, self-driven, and a strong sense of responsibility.
• Strong communication skills in both English and Chinese, with the ability to effectively collaborate with team members across different regions and departments.

Job Description

• Provide customer service at the reception counter to support staff, parents, students, and visitors, including answering phone calls and addressing inquiries.
• Maintaining and updating data records, filing of documents, inventories etc.
• Preparation of resources for the teaching of Science and Math Department (where applicable) and General Office.
• Assist in any general and ad-hoc duties as assigned by the Admin Manager and School Leaders.

Requirements

• At least 3 GCE ‘O’ level passes, including English
• Good communication and inter-personal skills
• Good team player
• Proficient in Microsoft Office, MS Excel, MS Word.
• At least have 2 years of experience working in a school environment

Working hours

• Mondays to Thursdays: 6:45am to 3:30pm, inclusive of 30 minutes lunch break
• Fridays: 6:45am to 3:00pm, inclusive of 30 minutes lunch break
• Service not required on Saturdays, Sundays and gazetted public holidays
• Excluding two weeks during each school term break in June School holidays (middle 2 weeks) and in December School holidays (middle 2 weeks), where salary will be pro-rated based on the actual days required to report to school. If the school requires the personnel to work during these breaks, additional days will be compensated accordingly.

Working locations

• (School environment)

Additional info:

• Contract Period: From 13 January 2025 to 12 January 2026
• With option to extend (Discretion)
• This is an outsourced role

If you are what we are looking for & keen to apply, kindly send in your resume (in MS Word format) to Fadhilah at [email protected] | 64941546

All Curriculum Vitaes will be treated with the strictest confidentiality. We regret to inform that only shortlisted candidates will be notified.

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to RMA Groups’ PDPA and e2i’s PDPA.

Norfadhilah Awang

EA License No. 93C4403

EA Regn. No. R24120699

We are seeking a passionate and motivated User Experience Design Intern to join our team. In this role, you will collaborate closely with the Business Development team to create seamless and engaging user experiences for our clients. If you have a keen interest in user experience design and enjoy conducting usability research, this opportunity is perfect for you.

Responsibilities

• Conceptualization & Prototyping: Develop and prototype UI/UX solutions that enhance user experiences across various platforms.
• Design Creation: Create visually appealing collateral and graphics for our WebApp, mobile applications, and marketing materials.
• Design Guidelines: Understand and apply design guidelines and UI/UX patterns to produce professional outputs that are usable, consistent, and intuitive for users.
• Insights Gathering: Collect insights on product adoption and improvements, track key performance indicators (KPIs), identify essential metrics, and suggest further iterations based on findings.
• Data Analysis Support: Assist in data acquisition and analysis related to product claims, consumer research, and competitor benchmarking.
• User Research Activities: Conduct user research activities including usability testing, A/B testing, stakeholder interviews, and surveys. Translate research findings into actionable recommendations.
• Behavioral Analysis: Analyze quantitative data to understand customer behavior, expectations, and the performance of features.
• Mini Project Delivery: Complete a mini project focused on the user experience journey for our Learning Management System (LMS) as assigned by your internship supervisor.

Requirements

• Education: Currently enrolled in a university or polytechnic program, preferably in a design-related major such as Human-Computer Interaction, User Experience Design/Research, Industrial Design Engineering, or a related engineering discipline.
• Design Tools Proficiency: Familiarity with at least two mainstream design and collaboration tools (e.g., Figma, Sketch, Adobe Illustrator, Adobe XD, Adobe Photoshop, InVisionApp, Flinto).
• Analytical Skills: Strong analytical and statistical skills; proficiency in data analysis software or AI tools for big data analysis is preferred. A genuine interest in using data and user research to inform design decisions is essential.
• Self-Starter Attitude: A proactive individual who is results-oriented and resilient in the face of challenges or setbacks.
• Communication Skills: Excellent oral and written communication skills; comfortable negotiating and interacting with senior decision-makers.
• Adaptability: Quick learner who can adapt to changes efficiently while working both independently and collaboratively within a team.
• Data-Driven Mindset: Strong ability to analyze quantitative data to derive insights and develop effective solutions.
• Bonus Experience: Previous experience in tech startups or roles related to Product Design, UI/UX design, or Graphic Design will be considered an advantage.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Research Fellow

We are seeking to recruit a Postdoctoral Fellow (Research Fellow). A person with background in molecular biology, cell culture, imaging and data analysis (including modelling and python programming) and has theoretical background on actin are encouraged to apply.

The MBI and NUS provide state-of-the-art facilities dedicated to microfluidics, high-resolution imaging, and cell culture that will support the fellow in training, setup, and execution of the project, and the successful candidate will have the opportunity to work closely with talented and motivated research staff, interdisciplinary PIs, and clinician scientists.

Qualifications

1. PhD in molecular cell biology or relevant biomedical disciplines. Candidates in the process of completing their PhDs in the relevant disciplines may also apply.
2. Competence in molecular biology, biochemistry, cell culture, and confocal microscopy.
3. Experiece in image analysis, photomanipulation and bioinformatics are highly desired.
4. Excellent communication and organizational skills
5. Highly motivated to work both independently and as a team member

The School of Materials Science and Engineering (MSE) provides a vibrant and nurturing environment for staff and students to carry out inter-disciplinary research in key areas such as Computational Materials Science, Characterisation Materials Science, Defence Composite Materials, Functional Composite Materials, Energy, Nanomaterials, Low Dimensional Materials, Biomaterials Materials, Biological Materials, Bioinspired Materials and Sustainable Materials.

For more details, please view https://www.ntu.edu.sg/mse/research.

We are looking for a Research Fellow to work on design and flexible electronics. The role will focus on Investigate new functional materials and material composites for sensors, electrodes, substrate, and develop strain sensor array with lightweight in large scale.

Key Responsibilities:

• Participate in the conduct of research project with research team members to ensure completion of deliverables
• Designed, develop and fabrication flexible sensor array, integrate biosensors into hybrid electronic devices, advancing wearable device functionality.
• Collaborate with internal and external stakeholder on Hybrid-Integrated Next-Generation μ-Electronics
• Assist in grant writing.
• Maintenance of lab or equipment or supplies that include procurement and liaison with suppliers.
• Assist or produce high quality reports and documents that consolidate research findings
• Publish research findings in high-impact journals and present at international conferences .
• Contribute to the mentoring and guidance of junior researchers and students, fostering an environment of learning and innovation within the project team.

Job Requirements:

• PhD degree in Materials Science and Engineering or related field
• At least 4 years of relevant experiences in flexible electronics
• Expertise in flexible electronics, mechanical sensors, strain sensors, tactile sensors.
• Proficiency in mechanical testing, electrical testing, materials characterization, system integration
• Good written and oral communication skills
• Capable of design and assemble of device prototypes.
• Candidates with publications in top-tier scientific journals are preferred.

We regret to inform that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We have openings for talented scientists who are ready to take up a leadership role in our group and to spearhead new initiatives and provide supervision and guidance to junior members of the team.

You will be part of a well-funded initiative to create quantum networks of superconducting circuits mediated by telecom photons. Your job could include the following subjects:

• Leading the design and fabrication of superconducting qubits that resist to moderate magnetic fields
• Spearheading the development and fabrication of chips that combine superconducting circuits and integrated photonics
• Exploring novel fabrication methods to couple rare-earth ions in solid-state with integrated optics and superconducting circuits
• Measuring quantum correlations between microwave photons at cryogenic temperature and telecom photons at room temperature

You will also work closely with the Principal Investigator to develop future experimental goals and shape the general research direction of the group. There will also be ample opportunity to explore your own ideas and participate in grant-writing processes. We aim to provide you a challenging and supportive environment to perfect your research leadership skills and get ready for your next career step!

ABOUT THE GROUP

Qove Laboratory is led by Assistant Professor Steven Touzard and located at the National University of Singapore. The lab is funded by the prestigious NRF Fellowship. Our group works on a large range of quantum technologies, with currently an emphasis on remotely entangling superconducting qubits with telecom photons to form long-range quantum networks.

To know more, go to https://qovelab.com

Qualifications

Postdoc applicants should have proven research experience and have a strong interest in quantum technologies. Furthermore, a PhD in Experimental Physics or Engineering is required, as well as knowledge on quantum optics measurement, optical fiber equipment, as well as cryogenic equipment. Ideally you received your PhD working on superconducting circuits, spin defects in solid-state, integrated optics or quantum optics experiments.

Job Description

• Provide customer service at the reception counter to support staff, parents, students, and visitors, including answering phone calls and addressing inquiries.
• Maintaining and updating data records, filing of documents, inventories etc.
• Preparation of resources for the teaching of Science and Math Department (where applicable) and General Office.
• Assist in any general and ad-hoc duties as assigned by the Admin Manager and School Leaders.

Requirements

• At least 3 GCE ‘O’ level passes, including English
• Good communication and inter-personal skills
• Good team player
• Proficient in Microsoft Office, MS Excel, MS Word.
• At least have 2 years of experience working in a school environment

Working hours

• Mondays to Thursdays: 6:45am to 3:30pm, inclusive of 30 minutes lunch break
• Fridays: 6:45am to 3:00pm, inclusive of 30 minutes lunch break
• Service not required on Saturdays, Sundays and gazetted public holidays
• Excluding two weeks during each school term break in June School holidays (middle 2 weeks) and in December School holidays (middle 2 weeks), where salary will be pro-rated based on the actual days required to report to school. If the school requires the personnel to work during these breaks, additional days will be compensated accordingly.

Working locations

• (School environment)

Additional info:

• Contract Period: From 13 January 2025 to 12 January 2026
• With option to extend (Discretion)
• This is an outsourced role

If you are what we are looking for & keen to apply, kindly send in your resume (in MS Word format) to Fadhilah at [email protected] | 64941546

All Curriculum Vitaes will be treated with the strictest confidentiality. We regret to inform that only shortlisted candidates will be notified.

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to RMA Groups’ PDPA and e2i’s PDPA.

Norfadhilah Awang

EA License No. 93C4403

EA Regn. No. R24120699

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a research fellow for the project on ultraprecision fabrication of functional components with additive manufacturing and micro-scale surface treatment. The candidate is required to conduct design and manufacture of the bespoke fixtures and tooling for post-processing of the 3D-printed geometries to meet the industrial requirements. He/she will also be responsible for reporting and coordinating with our stakeholders and writing technical papers.

Qualifications

Interested applicants are required to possess a PhD degree. He/she should have a good understanding in

1. Ultraprecision machining technology with excellent hands-on experience;
2. A solid background of micro-/nano-scale material removal processes and mechanisms with a good track record of publications;
3. Experienced in metal additive manufacturing and its post-processing methods; and
4. Mechanical and non-mechanical surface treatment and finishing techniques.

Salary: up to $3600

Duration: 6 months contract

Working Days & Hours: Mon-Fri Office Hours

Location: Science Park

Job Description:

- Participates in improvement initiatives and team building activities within customer service and across functional areas of core integration.

- Accurately process high volumes of part orders and service requests, including but not limited to part location and price determination, accurate cost and revenue account reflection, regular follow up with engineers and inventory management to ensure the customer's needs are met successfully and promptly.

- Prepares accurate pricing of part orders and returns based on factors such as foreign currency conversion rates, contract type and coverage, special customer discounts, part type category and subjective data from field service engineer as to reason for current part issue.

- Ensures accurate cost and revenue account are associated with parts, labor and expenses on each call, which requires solid understanding of cogs accounts, service types and service areas both internal and external.

- Determines shipping method based on numerous factors including part size and weight, contractual agreements with the customer, severity of system issue, and preferred carrier.

- Acts as customer liaison with Accounts Receivable to determine billing issues and find resolution.

- Maintains professionalism in working relationships with team, customers and others within the company.

- Ensure all areas of personal responsibility are handles promptly, accurately, and with outstanding customer service.

-Ad-hoc tasks/duties assigned by Superior

Job Requirements: Min Diploma/Degree in Supply Chain/Logistics/Business or similar w min 2 yrs of relevant order fulfillment experience, preferably in medical device/pharma

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Position: QA Assistant Manager (Food Science)

• Working days: 5 days work week (8.30am - 5.30pm )
• Salary: $4000 - $4700 (Depend on experience)
• Location: Senoko S Rd (Sembawang)

Responsibilities

• Ensure documentation update and control based on regulatory and certification requirements (e.g. FSSC 22000).
• Liaise with government authorities to ensure conformance to relevant food regulations and halal requirements
• Conduct internal audit and handling of third party audits
• Ensure effective implementation of all matters with regards to quality assurance and control e.g. pest control, effectiveness of cleaning chemical
• Supervise the handling of customer complaint and review of corrective action reporting.
• Supervise implementation of product and process checking based on QAQC program.
• Supervise health cert application handling and export registration.
• Ensure implementation of annual vendor evaluation on food safety & quality.
• Provide food safety training and relevant refresher training to team

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Primary Maths & Science Teacher (Enrichment Centre)
Location: Thomson Plaza, Tampines, Punggol, Parkway, Bukit Timah (Discuss the location during the interview but you will need to travel the Centre)
Working days: 4 Weekdays + 1 Weekend (Tuesday - Saturday)
Working Time: 44 hours per week
Salary: $3800 - $5500

Job Description

• Display strong classroom delivery skills according to centre suggested methodology
• Effectively utilise teaching materials to create a stimulating and engaging learning environment
• Mark and grade students’ assignments with value-added feedback
• Perform required classroom administration responsibilities
• Foster good relationships with students’ parents through regular written and/or verbal feedback
• Work together with the customer service team to provide all stakeholders with a positive customer experience
• Attend training sessions and meetings organised by the company
• Participate in level meetings/subject-sharing sessions
• Participate in curriculum development (full-time)

Job Requirements

• Bachelor's degree or equivalent
• Up-to-date with latest MOE syllabus
• 2-3 years of teaching experience

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Product Development and Management Executive (Cosmetic)

Working location: Pasir Panjang

Working Days: 5 days work

Working hours : 9am - 6pm
Salary Range: $3500 to $4200

Responsibilities:

1. New product planning:

• Analyse industrial trends, market data and customer insights to derive constructive ideas and information for the purpose of NPD.
• Define product competitive positioning and unique selling proposition (USP).

2. New product development (NPD):

• Responsible for entire NPD process; from concept initiation to completion, for both new product and reformulations.
• Take the lead in close collaboration with cross functional teams such as Regulatory, Marketing, Supply chain, Contract manufacturers, R&D and Quality, for seamless on-time delivery of products.
• Source for contract manufacturers and liaise with formulators to develop new product; be the main contact point with these suppliers for NPD/ formulation discussions.
• Review formulas and ingredient/ design statements for new product that is compliant with regulations.
• Familiar with the concept of product challenge test, stability, and compatibility studies.
• Research market prices, create accurate product costing data and propose product pricing.

3. New product introduction:

• Conduct product training to regional trainer/marketing team and key leaders of salesforce.

4. Post-launch product management:

• Analyse product performance and identify actions required.
• Manage product feedback and propose technically sound customer-centric reply.
• React to necessary corrective and preventive actions (CAPA) raised by Quality.

5. Contribute for and implement standard procedures (in compliance with industrial standards and QMS requirements) for any product development and management activities or as assigned.

Requirements:

• Degree in Cosmetic Science or Chemistry.
• Minimum 2 years of experience in product development/ management in the cosmetic and skin care industry.
• Bonus if candidates have prior experience with beauty/personal care/medical device.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Provide customer service at the reception counter to support staff, parents, students, and visitors, including answering phone calls and addressing inquiries.
• Maintaining and updating data records, filing of documents, inventories etc.
• Preparation of resources for the teaching of Science and Math Department (where applicable) and General Office.
• Assist in any general and ad-hoc duties as assigned by the Admin Manager and School Leaders.

Requirements

• At least 3 GCE ‘O’ level passes, including English
• Good communication and inter-personal skills
• Good team player
• Proficient in Microsoft Office, MS Excel, MS Word.
• At least have 2 years of experience working in a school environment

Working hours

• Mondays to Thursdays: 6:45am to 3:30pm, inclusive of 30 minutes lunch break
• Fridays: 6:45am to 3:00pm, inclusive of 30 minutes lunch break
• Service not required on Saturdays, Sundays and gazetted public holidays
• Excluding two weeks during each school term break in June School holidays (middle 2 weeks) and in December School holidays (middle 2 weeks), where salary will be pro-rated based on the actual days required to report to school. If the school requires the personnel to work during these breaks, additional days will be compensated accordingly.

Working locations

• (School environment)

Additional info:

• Contract Period: From 13 January 2025 to 12 January 2026
• With option to extend (Discretion)
• This is an outsourced role

If you are what we are looking for & keen to apply, kindly send in your resume (in MS Word format) to Fadhilah at [email protected] | 64941546

All Curriculum Vitaes will be treated with the strictest confidentiality. We regret to inform that only shortlisted candidates will be notified.

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to RMA Groups’ PDPA and e2i’s PDPA.

Norfadhilah Awang

EA License No. 93C4403

EA Regn. No. R24120699

SELECTION CRITERIA

-Minimum 3 year of teaching experience in elementary and secondary school or equivalent

-Experience in tutorial centers for primary and secondary students.

KEY RESPONSIBILITIES

Leading one-on-one or small group lessons.

• Provide necessary supervision and consultation with students
• Design learning goals for students
• Assist students with homework, test preparation, and academic lessons
• Help students to improve their academic performance and understand the key concepts of their lessons.
• Develop and provide materials to supplement classroom lessons, including study guides
• Conduct practice test to track progress, identify areas for improvement.
• Give advice and feedback about students’ performance to students, parents, and guardians.

SKILLS

- Mentoring

- Must possess a positive and patience disposition.

- Must display empathy and understanding towards individual students’ behaviour

- Good communication skills, active listener and a team player.

- Must possess a good leadership skill

- Must have a good presentation skills and systematic lesson delivery skills.

- Must be pro-active and student-centered in giving instruction and delivery

- Positive attitudes towards work and work related matters

Regional Sales Manager

• Location: Science Park Road
• Working Days: 5 Day A Week
• Working hours : 9:00am - 6:00pm
  Salary : USD 4,583 - USD 6,375 (Annual salary USD 55,000 - USD 76,500) - excluding commission

Responsibilities:

• Build and execute a strong sales strategy for New Business growth in the territory and achieve KPIs
• Generating and qualifying opportunities for for Sales and/or create new opportunities for business growth.
• Work closely with cross team members such as Inside sales/Marketing and self research to identify and engage prospects
• Build and execute a strong sales strategy for New Business growth in the territory and achieve KPIs
• Building and maintaining strong professional relations with existing customers through regular CRM activities.
• Delivery on revenue accountability with Pipeline creation, progression and timely closure, working with manager and cross team members
• Building and maintaining strong professional relations with existing customers through regular CRM activities.

Requirements:

• 5+ years of SaaS sales experience preferred with a strong track record of closing new business deals and growing accounts
• A self starter who can generate leads and establish a structured sales methodology and process including opportunity validation, pursuit and closure. This includes a sales operating pace, providing accurate forecast and pipeline updates to the business stakeholders
• Perform business development-related work as an ambassador of company in the Subsidiary
• Proficiency in Microsoft Office (Outlook, Excel and Word) and CRM usage such as Zoho CRM softwar/ Zoho Campaigns Manager.
• Prior experience CEO level software solution selling is essential.
• Ability to work with all levels of professionals within a business including key business decision makers like Owner/CEO, Directors, Business Managers, IT Managers and Solution Architects.

Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Contract Period:

• 2 Jan 2025 to 31 Dec 2025 (12 Months) + 1 Year Optional renewal by school.

Deployment:

• Mondays to Fridays: 8.30am to 2:00pm, inclusive of 0.5hr lunch break
• Service not required on Saturdays, Sundays and gazetted public holidays

Scope of Works:

1. Assist teachers in the preparation of teaching and learning resources and specimens needed.
2. Assist in the preparation of resources for science practical examinations.
3. Maintain all live specimens and laboratory equipment.
4. Conduct periodic stock-taking on laboratory supplies in science laboratory and advise Science HOD / LH on stock level
5. Conduct daily cleaning of the Life Science and Physical Science laboratories.

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Young and research intensive, Nanyang Technological University, Singapore (NTU Singapore) is ranked among the world’s top universities.

NTU Singapore invites applications for Lecturers for a course titled “Science and Technology for Humanity".

New Curriculum - Interdisciplinary Collaborative Core

NTU is reshaping its undergraduate curriculum to emphasise interdisciplinary and collaborative learning in the foundation years. This interdisciplinary and collaborative curriculum, consisting of 7 core courses, is designed to enhance students' cognitive agility, competence, and character beyond their chosen majors. These core courses are mandatory across all NTU undergraduate programmes and will be concentrated in the first two years of study, featuring mixed-class environments to foster multidisciplinary collaboration from the outset of students’ university experience. Through diverse team projects and assignments, students will engage in group learning that spans different disciplines.

The content for these core courses is developed by faculty from a range of fields to offer multiple perspectives on key issues, aligning with NTU's graduate attributes. Each course emphasises key transferable skills and addresses global challenges. A flipped classroom approach is used, allowing students to learn the materials before class, thereby maximising in-class deep learning, collaborative discussions and group activities.

"Science and Technology for Humanity" (ST4H), one of the core courses, is inviting candidates to contribute to NTU’s Interdisciplinary Collaborative Core (ICC) curriculum. Required for all undergraduates, ST4H explores the social, economic, and political impacts of science and technology, encouraging students to address societal issues through an interdisciplinary lens that integrates both STEM and non-STEM perspectives.

This role is pivotal to the Interdisciplinary Collaborative Core (ICC) Office’s mission to implement an interdisciplinary and collaborative curriculum aimed at cultivating future-ready graduates.

Key responsibilities include:

• Facilitating and conducting all teaching assignments, both face-to-face and virtual delivery
• Developing an instructional plan (known as a course outline or syllabus) for the course(s) they teach and ensuring that it meets university standards
• Developing, designing, and continuously improving lesson plans and class activities, assignment tasks and rubrics to foster student learning, stimulate class discussions, and ensure student engagement
• Supporting course administration such as course evaluation, online course materials, attendance records, academic counselling on student progress
• Conducting assessments, marking and grade entries, feedback to students, student consultations, non-academic matters etc.
• Developing course materials and learning resources for course delivery and support students’ learning
• Providing regular course and student progress statistics for reporting and strategic decision making
• Taking on course co-coordination responsibility, and working with others in the course as a team to ensure a positive and supportive learning and working environment for all—students, staff and faculty
• Demonstrating values and principles of professional conduct in all endeavours
• Any other assigned duties

Candidates with the following qualifications are encouraged to apply:

· MA or PhD training across STEM and/or humanities and social science fields

· Training relevant to one of the course topics (e.g., the future of work, Al and robotics, technology’s role in rebalancing power, transformations for health and wellbeing, life beyond humanity)

· Teaching and mentoring experience and experience with team teaching is preferred

· Interest and/or proficiency in technology-enhanced learning (e.g., developing online learning activities and assessments, creating lectures to be streamed online)

· Ability to work in a team

· A demonstrated potential for scholarship is an advantage

Applicants are invited to submit their applications (cover letter, CV, research and teaching statements, and citation report, where applicable) through the NTU career portal

https://ntu.wd3.myworkdayjobs.com/Careers/job/NTU-Main-Campus-Singapore/ICC-Lecturer--Science-and-Technology-for-Humanity-_R00019210.

The closing date for applications is 31 December 2024.

If you have any questions about this position, please write to:

ICC Lecturer Search Committee
Email: [email protected]

Job Description

· Conduct and analyse market research on commercial-defense products with AI technologies to identify market demand, growth opportunities and competitive threats

· Translate global and regional market intelligence into actionable insights that inform strategic product direction and commercial planning.

· Provide senior leadership with clear, data-driven reports on market trends, customer demands, and emerging technologies that could influence business strategy.

· Ensure compliance for advanced networks, sensors, and AI technologies by managing certification processes and maintaining adherence to industry regulations.

· Develop and optimize pricing strategies for networks, sensors, and AI-based solutions that balance profitability with competitive positioning.

· Lead the development and execution of GTM strategies for advanced networks, sensors, and AI products, targeting both regional and global market penetration.

· Partner with the Product Managers, Marketing and International Business to execute GTM plans that align with customer needs and business objectives.

Requirements

· Bachelor’s degree in Business, Engineering or a related field; advanced degree (MBA or M.S.) or certifications in Digitalisation, AI and Data Science.

· Experience: 5+ years in start-ups or corporate roles in commercial business functions that focused on business model innovation, go-to-market analysis, compliance and commercialisation in the AI, telecommunications and tech sectors.

· Solid understanding of market dynamics and regulatory requirements, with in-depth knowledge of compliance and certification processes relevant to the industry.

· Develop and implement pricing strategies and go-to-market plans.

· Preferred: Proficiency with advanced networks and sensors with AI applications.

· Strong written and verbal communication skills, with experience in delivering markets, business and commercialisation insights and recommendations to senior management.

· Exceptional organizational skills and the ability to manage complex, cross-functional initiatives with multiple stakeholders.

· Leadership: Experience leading teams and fostering collaboration across product, finance, and commercial departments.

· Singaporean only.

· Location: Jurong East / Ang Mo Kio.

Please submit resumes to [email protected]

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

The College of Computing & Data Science (CCDS) invites applications for the position of Research Associate.

Young and research-intensive, Nanyang Technological University, Singapore (NTU Singapore) is ranked among the world’s top universities. NTU’s College of Computing and Data Science (CCDS) is a leading college that is known for its excellent curriculum, outstanding and impactful research, and world-renowned faculty. Today, we are ranked #2 for AI and #6 for Computer Science by US News Best Global Universities; and #8 for Data Science and AI by QS World University Ranking.

A hot bed of cutting-edge technology and groundbreaking research, the College aims to groom the next generation of leaders, thinkers, and innovators to thrive in the digital age. Located in the heart of Asia, NTU’s College of Computing and Data Science is an ‘exciting place to learn and grow'. We welcome you to join our community of faculty, students and alumni who are shaping the future of AI, Data Science and Computing.

We are looking for a highly motivated candidate to join our team as a Research Associate.

Key Responsibilities:

• Develop LLM-based techniques for spatiotemporal data mining
• Collaborate with fellow researchers to design advanced algorithms and theories.
• Publish academic papers or patents.
• Guide and support associated students.
• Participate in and contribute to pertinent meetings
• Design, implement and test AI models for the project.
• Write reports and papers.

Job Requirements:

• Master degree in computer science or related fields of study
• Solid knowledge in graph algorithms and machine learning models
• Practical experience of dealing with spatiotemporal data
• Good communication and presentation (oral and written) skills (in English)

We regret that only shortlisted candidates will be notified.

Job Title: R&D Engineer - Electrolyte (Battery Material Research Division)

Location: NTU-Durapower Advance Lithium Battery Joint Lab #02-01, 1 Cleantech Loop, Singapore 637141

Overview:

We are seeking dedicated R&D Engineers specializing in electrolyte development to join our dynamic Battery Material Research Division. This role focuses on advancing high silicon-based projects, optimizing electrolytes for high-voltage, high-power, and high-safety applications, particularly in the realm of solid-state battery technology.

Key Responsibilities:

· Electrolyte Formulation: Lead and contribute to the development and optimization of electrolyte formulations tailored for high silicon-based battery projects, emphasizing enhanced performance, safety, and stability.

· Integration of Silicon Anodes: Collaborate within multidisciplinary teams to effectively integrate high-capacity silicon anodes into battery systems, addressing challenges related to volume expansion, cycling stability, and interface engineering.

· Experimental Design and Analysis: Design and execute experiments using coin and pouch cell configurations to evaluate and iterate on electrolyte performance. Analyze data to inform the enhancement of battery characteristics.

· Collaborative Research Initiatives: Work closely with cross-functional teams, including materials scientists, physicists, and mechanical engineers, to drive innovation in battery technology. Contribute actively to the advancement of solid-state battery research.

· Documentation and Reporting: Maintain meticulous records of experimental procedures, results, and analysis. Prepare technical reports and presentations contributing to scientific publications or patents.

Requirements:

· Bachelor's degree or higher in Material Science, Physics, Mechanical Engineering, or related fields.

· Proficiency in electrolyte chemistry and its significance in battery performance.

· Strong grasp of battery materials, with a focus on high silicon-based projects.

· Prior experience or demonstrable skills in experimental design and hands-on work with coin or pouch cell fabrication and testing.

Preferred Skills:

· Prior exposure in Project & R&D laboratory setting

· Experience or exposure to solid-state battery technology and solid electrolytes.

· Familiarity with software tools for data analysis and simulation in battery research.

· Any prior experience in industrial R&D, especially in battery or energy storage-related projects, would be advantageous.

· Knowledge or exposure to characterization techniques (e.g., impedance spectroscopy, SEM, TEM, X-ray techniques) is advantageous but not mandatory.

This role offers an exciting opportunity to contribute to cutting-edge research in battery materials, particularly in harnessing the potential of high silicon-based projects and advancing the development of next-generation solid-state batteries. Join us in shaping the future of energy storage technology!

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Fellow who will be responsible for designing and implementing next generation communication and networking technologies and protocols.

Responsibilities:

• Design and develop communication and networking protocols related to resource allocation, channel access, security related protocols for 5G/6G environments;
• Perform analysis and simulations to validate designs;
• Assists with the editing and preparation of manuscripts, reports and presentations;
• Participate in presentations and demos for exhibiting work at appropriate events

Qualifications

Requirements

• PhD in Electrical Engineering, Computer Science or a related field;
• Programming experience and knowledge of machine learning would be a plus;
• Possesses research background with ability to read and understand methodologies in research papers;
• A good team-player;
• Open to Fixed Term Contract

Job Description:

• Utilise 3D CAD design tools and perform high precision 3D printing (FDM & DLP)
• Utilise basic microcontrollers boards to build simple circuit boards for sensor control and data acquisition
• Testing and assembly of electronics and mechanical parts and debugging of software using basic tools like python or C++
• Familiar with maintenance of laboratory inventory and laboratory administrative tasks (Procurement, equipment preventive maintenance/repairs and safety matters)
• Enthusiastic, highly motivated, able to multitask, with excellent interpersonal and communication skills.
• Administrative works, such as ordering and payment with SAP system.

Job Requirements:

• Min Diploma/Higher Nitec/ Nitec holders in Bioengineering, Biophysics, physics, mechatronics, electrical engineering, mechanical engineering, computer engineering, or any related fields.
• Basic experience in handling simple electronics and basic hands-on soldering skills
• Prior experience or have interest in handling administrative tasks like raising Purchase Orders, payment requests, arranging preventive maintenance of equipment and liaising with vendors.

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845