Job Description:

• Preparation of mRNA-loaded polymeric or lipid nanoparticles using a microfluidic device.
• Evaluation of in vitro and in vivo gene transfection efficiency induced by the nanoparticles via intramuscular injection or subcutenous or i.v. injection.
• In vitro and in vivo toxicity studies.
• In vivo biodistribution studies.
• Participate in maintenance of equipment and procurement of consumables used for this project.
• Participate in lab safety and general housekeeping of the lab

Requirements:

• PhD in drug/gene delivery, pharmaceutical science, biomaterials or biomaterial science
• Familiarity in gene delivery with non-viral nanoparticles
• Highly motivated and able to work independently
• Team player with good interpersonal skills
• Good spoken and written communication skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The lab of Computational Transcriptomics at the Genome Institute of Singapore (led by Dr Jonathan Göke) is offering a position for a postdoctoral fellow to develop methods for analyzing long read transcriptomics data. The successful candidate will lead software and methods development to analyze RNA modifications from nanopore direct RNA-Seq data. The candidate is expected to develop new supervised and unsupervised approaches using statistics and machine learning, and to apply them to clinical samples. The position will be in close collaboration with experimental and clinical collaborators and industry partners, and provide full access to the capabilities of the sequencing platform.

The candidate will join an experienced team with expertise in collaborative software development and direct RNA-Seq data analysis (e.g. xPore, Nature Biotechnology (2021), m6Anet, Nature Methods (2022), bambu, Nature Methods (2023)), large scale transcriptomics data generation (e.g. the SG-NEx project), and access to the latest long read sequencing technologies. More information about the lab can be found online: https://www.jglab.org/ and www.github.com/goekelab

Requirements:

· PhD in Bioinformatics, Computer Science, Statistics, Genomics, or a related discipline

· Good programming skills and strong interest in methods development

· Experience in one or more of the following areas: algorithms development, transcriptome analysis, RNA modifications, statistics, machine learning, long read RNA-Sequencing, direct RNA-Sequencing

· Publication record with a first author publication (pre-prints are accepted)

· Excellent communication skills in written and spoken

We are searching for promising candidates who are great team players and actively seek opportunities to learn new skills. If you are unsure about your eligibility, please feel free to reach out via email.

Benefits

The Genome Institute of Singapore offers a competitive salary and a complete benefits package that ensures a very high living standard in one of the most modern cities in the world.

About Singapore and the Genome Institute of Singapore

Singapore is a city-state with one of the highest standards of living in the world and an international hub for the biomedical sciences. Singapore is a vibrant, tropical city, with rich Asian heritage and modern style of living, an ideal gateway to explore Asia, providing a unique experience and an excellent quality of life.

The Genome Institute of Singapore (A*STAR) is the national flagship program for genomic science in Singapore. You can find out more online: http://www.gis.a-star.edu.sg/

Contact and further information: For inquiries or to apply, please email your CV and a short introduction about yourself, your past research experience and your future research interests to Jonathan Göke ([email protected])

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Key Responsibilities:

• Develop, characterize, and evaluate 3D-printed metal alloy structures.
• Conduct mechanical testing, microstructural characterization, and process optimization of 3D-printed materials.
• Assist group leaders in writing research proposals.
• Collaborate with project team members and group leaders to achieve OKR（Objectives and Key Results).
• Author high-quality scientific publications and contribute to patent development.

Job Requirements:

• PhD in Metallurgy, Materials Engineering, Mechanical Engineering, or related fields.
• Strong publication record and/or relevant industry experience.
• Hands-on experience in metal 3D printing, including powder bed fusion, directed energy deposition, or related technologies.
• Proven expertise in metal alloy development, mechanical testing, and microstructural characterization.
• Experience with materials characterization techniques and performance evaluation in extreme environments.
• Solid understanding of metallurgy, machining, and alloy post-processing techniques.
• Proactive and results-driven individual with the ability to work independently.
• Effective team player with strong problem-solving and collaboration skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

• Preparation of mRNA-loaded polymeric or lipid nanoparticles using a microfluidic device.
• Evaluation of in vitro and in vivo gene transfection efficiency induced by the nanoparticles via intramuscular injection or subcutenous or i.v. injection.
• In vitro and in vivo toxicity studies.
• In vivo biodistribution studies.
• Participate in maintenance of equipment and procurement of consumables used for this project.
• Participate in lab safety and general housekeeping of the lab

Requirements:

• PhD in drug/gene delivery, pharmaceutical science, biomaterials or biomaterial science
• Familiarity in gene delivery with non-viral nanoparticles
• Highly motivated and able to work independently
• Team player with good interpersonal skills
• Good spoken and written communication skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

A*STAR Strategic Research and Translational Thrusts (SRTTs) are mission-focused programmes in strategic and emerging areas that are cross-disciplinary and of wider strategic interest to A*STAR and Singapore. Set up to address ambitious technological challenges towards impactful outcomes, each SRTT is led by a Programme Director (PD) and is centrally facilitated and supported by A*STAR HQ.

The Future Energy Acceleration and Translation (FEAT) SRTT pioneers next-generation technologies for critical components in extreme environments, thereby addressing today’s industrial challenges and accelerating the realisation of future energy solutions.

Project Manager (PM) and PM Administrator, Strategic Research and Translational Thrust SRTT

Job description:

• Responsible for managing R&D projects and product delivery within FEAT SRTT by planning, organizing, communicating with all FEAT SRTT team members and external stake holders under the guidance of FEAT SRTT Programme Director (PD) and Scientific Programme Manager (SPgM).
• Establish internal and external stakeholder communication & escalation plans, build project / programme schedules, identify and manage major risks, and define clear project / programme deliverables and milestones.
• Assist the FEAT SRTT PD and SPgM to ensure successful delivery of project / programme scope and targets while managing project / programme risk, quality, delivery, scope, schedule, and budget (and project change when required).
• Work with FEAT SRTT scientists and SPgM to bring together grant proposals to secure competitive funding and coordinate cross-project activities, under the guidance of Programme Director as well as Tech-Biz for industry engagements.
• Assist the FEAT SRTT PD and SPgM to manage and implement project / programme changes and interventions to achieve project deliverables and mitigate risk, and to lead, monitor and report the progress of the multiple projects to all internal and external stakeholders.
• Work closely with Tech-Biz officer to support industry engagements and projects, ensuring effective communication throughout the project life cycle.
• Lead and drive solutions for quality, procurement, finance and legal challenges, working closely with the various department and corporate support partners.
• Draft, update and maintain key documents relevant to project lifecycle (if relevant).
• Serve as main administrator of A*STAR project management system (A*PS) to support the roll-out and systematic set up of project management to SRTTs (present and future).
• Guide and train the SRTT project managers to use the A*PS including onboarding.
• Work closely with Central Project Management Office (CPMO), SRTT Programme office, internal colleagues and external stakeholders effectively for execution and implementation of PM processes, policies and projects and assists in the development of best practices of project management.
• Interprets functional A*STAR policies such as project life cycle management, risk management to ensure that plans are aligned to organisation objectives.
• Rollout risk management framework, including Enterprise Risk Management, Business Continuity Management for SRTTs.
• Generate dashboards to regular project reporting as required to management to effectively govern SRTT’s portfolio, programmes, and projects.
• Other exigencies of ad-hoc duties as required

Job Requirements:

• Master or Bachelor in any sciences/project management related discipline.
• Candidates with experience and knowledge in future energy (e.g. nuclear, hydrogen, geothermal) or existing industries (e.g. aerospace, O&G, space, semiconductor) will have an advantage.
• At least 3-5 years of project management experience in technology transfer, product development or research project would be preferable.
• PMP certifications (or equivalent) and experience with Microsoft’s Project System are an advantage.
• Ability to demonstrate a good level of understanding of technical / engineering processes and lead teams throughout the project development cycle.
• Good business acumen, driven to deliver customer requirements and project deadlines.
• Proactive team player and technically motivated to solve problems, innovate and deliver to internal and external customers.
• Good understanding of research administrative and grant processes.
• Experience in managing and roll-out enterprise software is required. Familiarity with PowerBI is a plus.
• Strong planning and analytical skills with an eye for details.
• Strong communicator with excellent interpersonal skills and stakeholder management skills.
• Able to work independently in a diverse environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Salary: Up to $4500

Benefits: 21 days AL, Completion Bonus

Working days: Mon - Fri, 8.30am - 5.45pm

Location: NTU (Pioneer)

Responsibilities:

• Conducting literature reviews, developing/assisting in the development of data collection instruments (surveys, protocols).
• Tracking progress, managing email, preparing reports (progress, results, articles, presentations), monitoring budget.
• Recruiting subjects, liaising with relevant departments, field data collection, data cleaning, verification, coding, database entry, maintaining data records.
• Attending project meetings, representing the project team, providing data access to researchers, potentially leading/guiding part-time employees.
• Assisting in preparing findings and contributing to publications.
• Requesting/acquiring necessary equipment and supplies, maintaining a shared research drive.

Requirements:

• Min. Degree in any field.
• Experienced with SPSS.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Hui Yew Cheong

Registration Number: R24124511

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Embark on a meaningful career to make a real difference in the lives of children!

ㅤScience Studios is a leading education centre specialising in the teaching of primary school science through engaging experiments and excellent printed materials. Learning at Science Studios is also supplemented by, and enhanced through, proprietary online resources.

ㅤWe believe children should enjoy learning in order to achieve better grades. We go the extra mile to carefully design, prepare, and deliver each lesson so that students are engaged and have fun learning. For many students, coming to Science Studios is one of the highlights of their week!

ㅤWe have been featured in several media articles including: The Straits Times (Hands-on activities spark kids’ curiosity), The New Paper (Helping pupils connect science lessons with the real world), The Sunday Times (Gifted kids get tuition too), Parents World (Best in Primary School Science Tuition) and Moneysmart.sg (Top 3 maths & science tuition centres in Singapore).

ㅤWe have also received hundreds of raving reviews from students and parents for our innovative approach to teaching science in a fun, yet effective, manner.

ㅤIf you are passionate about teaching and want a positive work environment where you can make a real difference, this is the right place for you.

ㅤWe have 3 branches across Singapore: West (Bukit Timah Plaza), Central (Balmoral Plaza) and East (Eastgate at Katong). Do let us know if you prefer to work at one of the locations.

Job description

• Teaching students through fun and engaging lessons; monitor students’ progress and help them to achieve better grades.

• Creating interactive online lessons for Science Studios Online. This includes educational videos, quizzes and Science Kits.

• Communicating with customers regarding courses and other educational products offered.

Requirements

+ Degree in the field of Science or Engineering with excellent grades.

+ Keen interest in science and believe in making learning fun!

+ Passionate about enriching children's lives through effective education.

+ Able to work one and a half weekend days (Sunday from 12 noon, and Saturday).
[2 weekdays, including Fridays, will be rest days. You’ll be able to avoid weekend crowds on your rest days. Furthermore, there is no need to work on most weekends in June and December.]

Job Highlights

• Make a real difference in the lives of children and have fun along the way!

• 5-day work week

• Meaningful career with growth and development opportunities

• Established and rapidly-growing brand

Xaltius is a technology and data-driven company with the expertise to provide innovative software solutions and training to customers around the globe. We work to revamp and refine business potential, driving business excellence. As a maturing, tech-based company at heart, we are driven by the ever-changing dynamics of digitalization to provide personalized software solutions elevating business capabilities. Alongside our counterparts, we offer retail and corporate training in the fields of data analytics, data science, big data, and cloud technologies and have been actively doing that in Singapore since inception.

We are a diverse and value-driven team of knowledgeable and talented individuals, focusing entirely on achieving outstanding customer satisfaction. Being a young and fast-moving team, open-mindedness and flexibility define us. We strongly believe in educating and inspiring interested adult learners through our training sessions and are looking for enthusiastic and futuristic clients to collaborate with on IT projects.

This is a one year contract role with the need for the following:

Skills Requirement :

Areas of expertise are as follow (one or more):

• Advanced Python
• Data Analytics & Machine Learning with Python
• Microsoft PowerBI
• Statistics for Data Science
• Microsoft Excel (Data Cleaning, Functions, PivotTables, Pivotcharts)
• SQL and Database Design
• Tableau
• Deep Learning
• Big Data
• Data Bricks

Job Requirements:

• Preferably 2 years relevant working/ teaching experience in data analytics and in training professionals
• Masters specializing in Data Science is a plus
• ACLP/ACTA certified is a plus
• Excellent interpersonal and written communication skills
• Willingness and proactive to assist in troubleshooting and solving issues
• Passion towards learning new skills and knowledge, and imparting knowledge to others.

After School Student Care Teacher | Math & Science subjects | Up to $3.5k | 5 Days | Sembawang

Basic Salary: $3000-$3500
Working Hours: Mon-Fri | 12pm-7pm 44hrs/week
Working Location: Sembawang Shopping Centre

Job Responsibilities:

• Implement the program for the class in accordance with the policies, guidelines, framework and philosophy of the centre.
• Guide primary school children (primary 1 to 6) to ensure completion of daily homework
• Keep accurate records of children’s progress and address each child’s educational and developmental needs on an individual basis to the best of your ability.
• Responsible for the preparation and upkeep of teaching resources, arrangement, appearance and learning environment of the classroom.
• Maintain and build relationships with children and parents.
• Conduct franchise unique enrichment programmes.
• Being an inspiring role model with a creative spirit and a champion (positive) mindset.
• Ensure safety and timely transfer of students from school to student centre
• Ensure safety of children within the premises
• Any other ad-hoc duties as delegated by Centre Director

Job Requirements

• Diploma or higher in Math or Science.
• Minimum of 2 years of teaching experience with primary school students.
• Able to teach primary school subjects (Preferably Both Math & Science)

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant

• Position title : Afterschool Care Teacher
• Location:The Woodleigh Mall
• Working Days: 5.5day
• Working Hours-Monday to Friday 1030am to 7pm
  - Saturday 9.30am to 1.30pm
• Salary : $2,200 - $3,400

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Responsibilities

• Implement the program for the class in accordance with the policies, guidelines, framework and philosophy of the centre.
• Guide primary school children (primary 1 to 5) to ensure completion of daily homework.
• Keep accurate records of children’s progress and address each child’s educational and developmental needs on an individual basis to the best of your ability.
• Responsible for the preparation and upkeep of teaching resources, arrangement, appearance and learning environment of the classroom.
• Maintain and build relationships with children and parents.
• Conduct unique enrichment programmes.
• Ensure safety and timely transfer of students from school to student centre.
• Ensure safety of children within the premises.
• Any other ad-hoc duties as delegated by Centre Director.

Job Requirements

• Diploma or higher in any discipline with minimum of 2 years of teaching experience with primary school students.

You will play a pivotal role in the Heart Protection theme of the National Heart Research Institute of Singapore (NHRIS) at the National Heart Centre of Singapore (NHCS). Your responsibilities will include:

· Leading, executing and managing a public-private partnership programme.

· Initiating and coordinating key processes of the programme in collaboration with Principal Investigators.

· Providing valuable intellectual contributions and strategic insights for the overall programme and its projects.

· Engaging and managing key stakeholders, both internal and external, across hospitals, research institutions, and industry partners.

· Overseeing administrative tasks such as facilitating meetings, managing agreements, generating reports, and budgeting to ensure the smooth operation of the programme

Job Requirements

- Degree in Science, Health Science or its equivalent with a strong background in molecular and cell biology

- Minimum 1 - 2 years’ relevant work experience in healthcare or research setting

- Experience in managing budgets and supervising junior staff

- Relevant project management certification and familiarity with A*STAR reporting requirements would be an advantage

- Demonstrated project management experience, preferably in laboratory and finance management

- Experience in preparing and submitting grant proposals, including knowledge of grant variations, submissions, and reporting

- Able to work independently, coupled with effective problem-solving and organisational skills

- A capable leader who can guide the team, monitor progress, supervise, and manage collaborative research activities

The Role

The successful candidate will lead the planning and implementation of future-enabled enterprise architecture projects for JRI Singapore, and APAC region including Singapore, aligned to requirements of SMBC, in cooperation with Tokyo Head Office, the current product owner.

He/she will work closely with stakeholders mainly from Japan Head Office, end users, system development depts, company back-office depts, vendors and establish effective and efficient collaboration.

Job Responsibilities

• Lead, manage and implement end to end identified future enabling projects through technical/functional/operational design and maintenance of IT Infrastructure according to the Company’s project governance framework.
• Contribute to the development of overall End User Computing Services, Server platform (Dynamics, DevOps, Dev Servers and Windows domain environment), L2/L3 network and WAN.
• Plan for IT security measurement in the office, collaborating with Japan Head Office security department and CCoE (Cloud Center of Excellence).
• Plan and lead IT system implementation projects which involve variety of the IT and non-IT department located in Tokyo and Singapore to enhance the banking IT capability from regional perspective.
• Organize and facilitate project budget/cost related matters with proper understanding of differences between Singapore and Japan accounting policy. (IFRS/SFRS v.s. JGAAP).
• Provide timely escalation and resolution of major issues to Management and Head Office teams.
• Work closely with business depts and other stakeholders to understand business and IT operational requirements, translating them to technical requirements.
• Partner with planning dept to ensure alignment of all company platform’s architecture processes, standards, strategies and roadmap with that of JRI and SMFG Group.
• Collaborate with Japan Head Office to establish internal control in which an entity is managed and governed.
• Prepare and present regular project reports and documentations.
• Prepare and put forward budget plans for identified project initiatives, influencing, and negotiating with Head Office to obtain support for them.
• Ensure project status and progress are communicated to stakeholders and IT teams in a timely and concise manner.
• Work out full-scaled and precise proposal with technical solution team, coordinate and communicate resources and define clear roles with all project resources.
• Assume agreed projects that may be assigned from time to time in tandem with business priorities/requirements.

Job Requirements

• Bachelor’s Degree in Information Technology, Computer Science or equivalent with around 5 years of experience in providing IT service to a Financial Institute.
• Knowledge in IT system infrastructure for large number of transaction volumes and/or users.
• VMware certification – Security certifications and CCNA certification are desired for the role.
• ITIL v3 Foundations Certification.
• Microsoft certification – Intune, Microsoft 365 mobility and security, Managing Modern Desktops, Modern Desktop Administrator, MS Azure certification, MCSA/MCSE.
• Proficiency in both English and Japanese is highly preferred as this role needs to prepare reports in Japanese for reporting to Head Office in Japan. This role also needs to present and communicate with stakeholders and counterparts in Tokyo Head Office who mainly communicate in Japanese.
• Experience to handle regional projects which involves stakeholders in Japan.
• Experience in supporting IT End User Service in large organization.
• Proven experience in collaboration and workgroup for project delivery
• Experience in internal control or audit area with a deep understanding of the IT business process and systems.
• Project Management certification (e.g. PMP, PRINCE2) or equivalent experiences
• Knowledge of IT service business for bank or FI.
• Comprehensive knowledge of technologies supporting asset management processes.
• In-depth knowledge on MS 365, Group Policy, AD Trusts, AD Sites and Services, DNS, DHCP, and DFS.
• In-depth knowledge on Microsoft Licensing, SCCM, PC/laptop hardware and software delivery.
• Capability to lead and drive the IT BAU related tasks with good time and stakeholder management skills and experience.
• Proactively socialize with stakeholders and maintain good relationship to steer tasks.
• Possess strong and assertive verbal, written communication skills and presentation skills.
• Ability to work in a fast-paced environment with constantly changing priorities.
• Good bi-directional and collaborative attitude in order to work as a professional in a team.
• Willing to take an ad-hoc project as necessary.

Position Summary

Your main role will be to ensure that Lam Research comply with regulatory and safety requirements. You will be is responsible for administering and coordinating the organization’s Workplace Safety and Health Management Systems, processes and policies. This will include conducting safety inspections, closing audit findings, reviewing workplace risk assessment and coordinating safety training for all personnel.

Job Responsibilities:

• Enter, inspect and examine worksite for potential safety violations/hazards; (WSH Reg)
• Inspect and examine any machinery, equipment, plant, installation or article in the worksite for potential violations / hazards; (WHS Reg)
• Assess the level of noise, illumination, heat or harmful or hazardous substances in the worksite and the exposure levels of persons at work; (WSH Reg)
• Investigate any accident, dangerous occurrence or occupational disease that occurred within the worksite. Coordinate with management, customers and relevant authorities when an incident / accident occurred
• Employ risk mitigation strategies, and environmental and safety requirements for the business unit;
• Identify safety lapses and provide solutions to improve. Execute to aligned action plans to close the identified gaps;
• Conduct audits to ensure conformance to Lam’s and customers’ safety requirements, policies and procedures;
• Conduct safety briefings (as appropriate) including representing Lam Research at customer meetings on issues relating to EHS;
• Report/ assist in any accident / injury/ near misses’ investigations
• Establish mechanisms to implement and monitor compliance requirements such as advise and assist with job analysis, risk assessment, job instruction training, safe work procedures, method statement
• Establish tracking and ensure that all Lam personnel attend required training such as CSOC (Construction Safety Orientation Course) and other related EHS (Environmental, Health & Safety) training for employees, including new hires, contractors and loaners from other countries;
• Take appropriate action to halt any conditions that may result in imminent hazard to persons, property, or the environment;
• Perform the role of Safety Assessor for the inspection/ assessment of Permit-to-work system
• Notify the local EHS manager of any unresolved compliance issues and situations, and seek EHS guidance in implementing corrective actions as needed; facilitate and promote the exchange of information within the business unit and with EHS in the interest of collaborative problem solving and program improvement;
• Represent the business unit on EHS committees (Customer meetings) and provide regular briefings to business unit management and the local EHS manager on the unit’s environmental and safety program status, trends and risks.
• Identify PPE (Personal Protective Equipment) requirements and sourcing of approved supplier for procurement
• Assist in applying special permits if certain work is required (e.g. hot work, working at tall heights etc), including facilitating the application / renewal of licenses and liaise with relevant authorities/bodies for license / permit issue
• Maintenance of worksite safety records, certificates, notices and documents (WSH Reg)
• Manages internal WSH systems, coordinates government agency or customers visits, inspections and compliance audit at the workplace and submit audit reports to relevant stakeholder for review (Customs, Foreign Trade, Biz Safe, MOM)
• Point of contact for physical security in Singapore Office
• A key member of the SEA BCP (Business Continuity Plan) team, responsible to ensure that the business continuity plan is up to date and support the coordination of annual BCP tabletop exercise.
• Lead a team of contract EHS officer / coordinator, ensuring that adequate resources are deployed to support different customers sites.
• Any other Safety, Health and Environmental related duties as assigned by the Immediate Supervisor

Job Requirements:

• Bachelor’s degree or equivalent
• Processes relevant qualification recognized ty the Ministry of Manpower
• Must be a registered Workplace Safety and Health (WSH) Officer with the Ministry of Manpower
• At least 10 years’ experience handling a WHS in a manufacturing site, preferably in the electronic or semiconductor industry
• Possesses strong inter-personal and communications skills, both in written and spoken English
• Comfortable to interact with people of diverse backgrounds
• Is meticulous and maintains detailed and accurate records
• Possesses good analytical and problem solving skills

• Conduct literature reviews

• Request or acquire equipment or supplies necessary for the project

• Manage and respond to project-related email

• Track research progress over time

• Prepare, maintain and update research shared drive

• Attend project meetings and other meetings as necessary to represent the project team

• Summarize project results

• Prepare progress reports

• Prepare other articles, reports and presentations

• Monitor the project budget

• Assist in preparing instruments and protocols for data collection

• Assist in recruiting subjects and liaising with both internal and external departments

• Develop or assist in the development of quantitative survey instruments and to coordinate the logistics of implementing and collating the data.

• Travel to field sites to collect and record data and/or samples as appropriate to the specific objectives of the study

• Review and clean data to ensure completeness and accuracy of information; follow up with subjects to resolve problems or clarify data collected

• Maintain accurate records of survey, safeguarding the confidentiality of subjects, as necessary

• Maintain accurate records of interviews, safeguarding the confidentiality of subjects, as necessary

• Provide ready access to all project related data for the faculty researcher and the project team

• As appropriate to the specified position, code and verify data in accordance with specified research protocol and coding procedures and enter data into a computer database and/or spreadsheet application for subsequent analysis

• May lead or guide the work of part-time employees

• Perform miscellaneous job-related duties as assigned

• Assist in preparing findings for publication

• Assist in writing and contributing to publications

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON,

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Linda LIM
Registration Number: R1221302
EA Licence No: 06C2859 (MCI Career Services Pte Ltd)

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Position Summary:

As a Materials Planner at Lam, you will be responsible for planning and monitoring the materials and products used by the Account team. Ensure that the region doesn't run out of the materials/parts needed to support our customers. Portfolio includes managing the flow of inventory and make sure products are properly shipped to customers. Partnering with the Account team, you set up a business process for determining proper stocking and replenishment level and representing the region to the corporate to get the required stock.

Job Responsibilities:

• Partner the Account team to understand the business requirements (demand forecast drivers) to determine proper stocking and replenishment level. Represent the region to the corporate team to get the required resources
• Work with external customers, internal account team and field service personnel to determine replenishment systems/processes, issue and receipt procedures, required inventory control policies and procedures, management information system to support material availability control and distribution to the Field
• Responsible for overseeing the inventory management process, defining appropriate inventory levels, eliminating obsolete and off-spec material and reduce aging material
• From historical usage develop and maintain plan for every part. Use the plan for every part data to update and maintain SAP for forecasting purposes.
• Develop and enforce business processes and work flows to enable efficient and effective operations
• Any other duties as assigned by the Immediate Supervisor

Job Requirements:

• Bachelor in Engineering or equivalent, Incumbents with no prior experience are welcome to apply
• 3-5 years relevant experience
• Possesses strong inter-personal and communications skills. Experience in dealing with difficult work partners
• Commands good oral and written English
• Demonstrated independent work initiative, sound judgment, diplomacy, analytical ability and professional demeanor
• Knowledge of SAP system is an advantage

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Chugai Pharmabody Research Pte. Ltd. (“CPR”) was established in Singapore as a wholly-owned subsidiary of Chugai Pharmaceutical Co., Ltd (Chugai), a member of Roche group, in January 2012 and started operations on July 2, 2012. Located at Biopolis in Singapore, it aims to generate new antibody drugs based on Chugai’s proprietary antibody engineering technologies, such as recycling antibody®, sweeping antibody®, bispecific antibody.

Position – Senior Scientist in Pharmacology Unit

CPR is seeking a Ph.D. Scientist with expertise in in vitro and in vivo pharmacology studies. The candidate will also be responsible for disease target validation and have a strong background in the area of oncology. The candidate will lead antibody screening for a drug discovery project. Depending on the experience and opportunity, the candidate will also lead antibody drug discovery project and participate in strategic discussions to advance programs through pipeline.

Responsibility

The applicant should be highly skilled in some of the following areas:

· Design and conduct experiments to investigate novel therapies

· Mentor junior researchers and research associates

· Propose a new drug discovery project

Job Requirements

The applicant should be highly skilled in some of the following areas:

• Proficiency in cell culture techniques with various cell lines
• Expertise in molecular biology techniques (generation of cell lines with overexpression, knockdown, and knockout of a gene, PCR, qPCR, Western blotting, ELISA)
• Experience with flow cytometry and cell sorting
• Knowledge of cell lines and animal models in cancer research
• Primary cell isolation and culture techniques
• Experience with drug discovery research would be highly advantageous
• Three to five years of post-doctoral research experience in oncology would be highly advantageous.

The applicant must have completed and be awarded with a relevant Ph.D. degree in Science or related field (not in the process of achieving it) with 1-2 years of working experience in a related field. In addition, the successful candidates must be able to demonstrate their molecular and cellular biology expertise as evidenced by projects, presentations, or peer-reviewed scientific publications.

Scientists with strong passion in medical science for creating and delivering innovative drugs to society which leads to saving patients suffering from unmet medical needs are highly desired. Familiarity or having prior work experience in antibody drug discovery work will be a plus, although not absolutely necessary. You should also possess good command of spoken and written English, excellent organizational and communication skills, team player mindset, as well as the ability to perform multi-task.

Interested applicants are invited to email their detailed resume, as well as their qualifications, availability, current and expected salary to: [email protected]

For more information regarding our Company, you may refer to our website at:

http://chugai-pharmabody.com/

We regret that only short-listed candidates will be notified

Tuition centre looking part time/ full time Math Tutors to teach small group (up to 6 students)

Please register your profile with us here as we have many 1-1/small group tuition assignments available(fill in form take less than 5 mins):

https://tinyurl.com/TuitionCentreJobRegistration

Day/time:

Weekday (Tuesday) 630-830pm

Location: Choa Chu Kang/Teck Whye

Salary: $25-35/hr or $70-$140/day

Looking for Secondary science tutors to take lower/upper secondary science class or assist main tutor in Chemistry/Physics/Bio

Part time role available: weekday evening (630-830pm)

Preferably someone with experience/familiar with the syllabus and able to commit till the end of academic year 2025.

Job Scope:

• Able to provide a fun and interactive lesson for students
• Improvement of curriculum, creating lesson materials/tests
• Provide parents simple follow up of their child’s learning progress

Requirements:

• Minimum Qualification 5 GCE O levels credits/ Diploma/ A Levels
• Preferably with at least 1 years of experience in teaching tuition centre, student care or taught in group tuition (3 or more student), or 1-1 home tuition
• Commit till the end of academic year (Oct/Nov)

Tuition Centre is expanding and offer a career progression towards assistant centre manager and centre manager role.

Fresh graduates are welcome and trainings will be provided

If you are keen, please fill in this short form and shortlisted candidate will be asked for a Zoom interview

https://tinyurl.com/TuitionCentreJobRegistration

also submit an application through this portal, we will contact you.

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Nanyang Business School is seeking a full-time Research Associate to work with Professor Sharon Ng in the Division of Marketing. The candidate is expected to assist Prof Ng with on-going research projects, and to work on projects of their own interest. In particular, we seek candidates with interest in understanding how people respond to new technology (e.g., robotics, AR, AI). We are also interested in candidates who may want to explore the intersection of culture and technology. One core aspect of this role will be to help the faculty to design and conduct experiments. The candidate will be included as an author/co-author on publications from the projects.

Key Responsibilities:

• Project management
• Literature review
• Ideation
• Conducting of experiment
• Drafting the paper

Job Requirements:

• Master degree in Psychology, Sociology, Marketing, or related social science discipline. Prior work (including but not limited to dissertation) must involve statistical analyses of survey and experimental data.
• Excellent academic record and work ethic required.
• Excellent written skill is required. The candidate should be able to write a research paper well.
• Enthusiasm for research required.
• Working knowledge of SPSS is necessary. Knowledge of other statistical tool is a plus.
• Prior publication in marketing peer review journals is a plus

We regret to inform that only shortlisted candidates will be notified.

Required Qualifications

• Passionate about the cause of education
• Dedicated and patient
• Team spirit
• Bachelor's Degree in the related subject

Job Timings (Non-negotiable)

• 44 Hours Per Week
• Monday - Thursday: 11:30 am - 07:30 pm
• Saturday and Sunday: 09:30 am - 06:30 pm
• Lunch Break: 01:30 pm - 02:30 pm

Overtime

Employees who work more than the stipulated working hours on any day will be paid for any additional hour worked at 1.5 times their hourly basic rate of pay.

Public Holidays

• The Centre will remain closed on all public holidays EXCEPT Labour Day and Vesak Day. The board examinations are held in May/June and we are duty bound to our students to remain open on these two public holidays to assist them in their final examination preparation.
• Employees who work on Public Holidays (9:30AM - 6:30PM) will receive twice their basic rate of pay for work on that day.

Leave Policy

• Annual leave : 18 days
• Birthday Leave: 1 day
• Family Care Leave : 2 days
  (the above unused leave will be encashed at the end of the year)
• Medical leave: 14 days
• Hospitalisation Leave : 60 days (includes 14 days of medical leave)
  Unused leaves will lapsed at the end of the year
• Maternity leave :16 weeks (For Singapore Citizens)
  8 weeks (For others)
• Paternity leave :2 weeks (If employee has worked for 3 continuous months and child is a Singapore Citizen)
  For Others, as per mutual agreement between employee and employer.
• Childcare Leave :6 days (if child is less than 7 years, and a Singapore Citizen)
  2 days (if child is less than 7 years, for others, as per Employment Act)
• Compassionate Leave: 3 days (can be availed only once in a year)

Insurance

• General Physician (GP) : No Co-Pay (Panel Clinic)
• Specialist (SPL) : $2000 per calendar year (No Panel)
• Hospitalisation (Hosp) : $60000 Annual (Govt Restr, 4 bedded Ward)
• Dental Plan (DP) : $1000 per calendar year, 10% Co-Pay (No Panel)

Resignation Procedure

• Employees are free to resign with just a 1-day notice period. We understand that new opportunities can arise, and we don’t want a lengthy notice period to stand in your way. Our priority is to support your success, whether that’s with us or in your next role.

Walk-in interview

Monday Tuesday, Wednesday, Thursday, Saturday and Sunday at 2:30PM at MathVision Campus, Tekka Place, Annex Block, #01-51 to #01-54 and #01-55 to #01-59, 2 Serangoon Road, Singapore

Please whatsapp your resume or education qualifications at +65 8868 3475

Required Qualifications

• Passionate about the cause of education
• Dedicated and patient
• Team spirit
• Bachelor's Degree in the related subject

Job Timings (Non-negotiable)

• 44 Hours Per Week
• Monday - Thursday: 11:30 am - 07:30 pm
• Saturday and Sunday: 09:30 am - 06:30 pm
• Lunch Break: 01:30 pm - 02:30 pm

Overtime

Employees who work more than the stipulated working hours on any day will be paid for any additional hour worked at 1.5 times their hourly basic rate of pay.

Public Holidays

• The Centre will remain closed on all public holidays EXCEPT Labour Day and Vesak Day. The board examinations are held in May/June and we are duty bound to our students to remain open on these two public holidays to assist them in their final examination preparation.
• Employees who work on Public Holidays (9:30AM - 6:30PM) will receive twice their basic rate of pay for work on that day.

Leave Policy

• Annual leave : 18 days
• Birthday Leave: 1 day
• Family Care Leave : 2 days
  (the above unused leave will be encashed at the end of the year)
• Medical leave: 14 days
• Hospitalisation Leave : 60 days (includes 14 days of medical leave)
  Unused leaves will lapsed at the end of the year
• Maternity leave :16 weeks (For Singapore Citizens)
  8 weeks (For others)
• Paternity leave :2 weeks (If employee has worked for 3 continuous months and child is a Singapore Citizen)
  For Others, as per mutual agreement between employee and employer.
• Childcare Leave :6 days (if child is less than 7 years, and a Singapore Citizen)
  2 days (if child is less than 7 years, for others, as per Employment Act)
• Compassionate Leave: 3 days (can be availed only once in a year)

Insurance

• General Physician (GP) : No Co-Pay (Panel Clinic)
• Specialist (SPL) : $2000 per calendar year (No Panel)
• Hospitalisation (Hosp) : $60000 Annual (Govt Restr, 4 bedded Ward)
• Dental Plan (DP) : $1000 per calendar year, 10% Co-Pay (No Panel)

Resignation Procedure

• Employees are free to resign with just a 1-day notice period. We understand that new opportunities can arise, and we don’t want a lengthy notice period to stand in your way. Our priority is to support your success, whether that’s with us or in your next role.

Walk-in interview

Monday Tuesday, Wednesday, Thursday, Saturday and Sunday at 2:30PM at MathVision Campus, Tekka Place, Annex Block, #01-51 to #01-54 and #01-55 to #01-59, 2 Serangoon Road, Singapore

Please whatsapp your resume or education qualifications at +65 8868 3475