Meranti Power Pte Ltd, a fully owned subsidiary of Energy Market Authority, is currently in the final phase of power generating station development. and will thereafter, operate and maintain the power generating station. We are inviting applicants for the position of Senior Engineer, Electrical who shall report to the Head, Electrical. The scope and requirements are as follows:

RESPONSIBILITIES :

A. Current & future Project

• Ensure compliance to the prevailing Workplace Safety and Health Act and all relevant authorities’ regulations.
• Assist the Project Director and Head (Electrical) in all phases of Project Cycle related to all electrical systems and equipment including conceptual stage, drafting work scope for Owner’s Engineer consultant, system design and engineering stage, execution stage and right up to commissioning.
• Work with the Consultants for the timely completion and cost-effective implementation of the projects.
• Participate in the design review, implementation & commissioning of new power plants’ Electrical systems, including evaluation and recommendations for acceptance of the Consultants/Contractors’ Electrical systems engineering design and selection, procurement, and installation proposals for the power plant to ensure successful commissioning on time & within budget.
• Detect and provide prompt triggering of risks or potential risks to avoid/minimize delays or losses, recommend cost effective plans and monitor finances to ensure each phase of Electrical system works is started and completed on time and within the budget allotted.
• Attend meetings with various stakeholder to report on project progress against milestones and challenges faced
• Manage problems resolution processes with Head (Electrical) and consultants with respect to power plant project Electrical systems design, implementation, installation, and commissioning and resolve co-ordination/interfacing issues with other parties.
• Provide status updates to Head (Electrical) for report to MP’s Senior Management on progress of major Electrical systems project activity against the schedule, highlighting significant milestones and any issues/interfacing affecting or may affect project cost and schedule.
• Support Head (Electrical) to communicate, coordinate and collaborate with Contractor, external parties and agencies (SPPG, EMA/ PSO, JTC, etc) with regards to Meranti Power’s 400kV Switchhouse/ Substation, SPPG feeder connections, Gas Insulated Switchgears, Generator Step-up Transformer, Insulated Phase Bus Duct, etc. at different stages of the project (including Commissioning).

B. Operation & Maintenance Phase

• Be familiar with all regulations pertaining to the Electrical systems of the power station’s equipment, auxiliaries and common systems maintenance works and safety, e.g. Workplace, Safety & Health Act’s Regulations, including Risk Assessment and Mitigating Measures, Work Methods, Permit-to Work, Lock-Out-Tag-Out System in relation to maintenance of Electrical equipment in the power generation station.
• Prepare technical specifications for equipment electrical parts and work services when required. Work with Procurement to manage the procurement of Electrical parts and services.
• Coordinate all Electrical Maintenance programmes (Predictive, Preventive, Corrective) and liaising with relevant stakeholders to ensure safe and timely completion of works.
• Be familiar with Predictive Maintenance monitoring techniques.
• Familiar with use of Computerised Maintenance Management System (CMMS).
• Manage and optimize all planned plant/equipment electrical maintenance activities during minor and major overhauls and inspections
• Responsible for the functional tests and analyse the failures related to Electrical systems and components and recommends remedial/mitigation measures to prevent recurrence. Troubleshooting of faults/defects & carry out failure analysis to determine root cause.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Supervision of Electrical maintenance contract works and prepare work procedures and risk assessment for all Electrical maintenance activities
• Manage day-to-day activities of Electrical team effectively; may be appointed as Reporting Officer to technical officers.
• Support Head (Electrical) to engage and manage Licensed Electrical Worker (LEW), Qualified Persons (QP), Competent Persons (CP) to carry out the required services and works.
• Track the year-to-date expenditure against the approved department Electrical budget; Support Head (Electrical) to prepare upcoming budgets.
• Prepare Department’s Electrical monthly report
• Design, coordinate and conduct training on Electrical matters

C. Other tasks

• Perform administrative tasks for the benefit of the organization as instructed by Head (Electrical) or Senior management e.g. secretariat for meetings, staffing duties, presentations, etc.
• Take part in organisation-wide activities in various capacities such as organising committees for events,
• Attend training/ events/ conferences that is in line with the organisation objectives and proceed to share the learning points for organisation benefit

REQUIREMENTS :

• Degree in Electrical Engineering or equivalent.
• Major Project Management experience with at least 3 years in power plants development, implementation, commissioning tests, preferably including operation/electrical maintenance of large power plants, specifically employing Combined Cycle Technology.
• Conversant with international and local codes, standards and recommended practices for design and selection of electrical equipment related to the above plants will be an added advantage.
• Hands-on experience in power plant projects’ tender preparation including technical/functional and commissioning tests specifications for C&I equipment, tender evaluations, contract negotiations, contract administration and contract supervision.
• Experience in overseeing the power plants worksite’s adherence to Workplace Safety & Health, and relevant regulatory requirements.
• Will be required to work beyond office hours in event of plant exigency or emergency.
• Self-motivated, results focused and willing to work under tight schedules with multi-disciplinary teams.
• Able to lead a technical team and harness and direct the strengths of the different members to output greater effect than the sum of each individual. ·
• Willing to work in construction site office during construction stage and Jurong Island. (Morning transportation pick-up points available at different parts of Singapore.)

Only shortlisted candidates will be notified.

By submitting your personal data and/or resume to Meranti Power Pte. Ltd. (“MP”), you shall be deemed to have given your consent to MP for collecting, using, and disclosing your personal data for the purpose of assessing your job application.

Project details

Our client is the corporate and investment banking arm of The Group, world’s 12th largest bank by total assets.
We work daily with international branches located in 30 markets by:
- Envisioning and preparing the Bank’s futures information systems
- Partnering and supporting core banking flagships and transverse areas in their large scale development projects.
- Providing premium In-house Banking applications,
This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.
We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

The department is responsible for development and maintenance of Capital Market IT applications (in-house and package) used worldwide, covering Front Office (Murex, Apex, Orchestrade…), Back Office (Summit, Calypso…), Market data referential (Asset Control..), Market Risk (in-house application on big data technologies).

The Repo and Secured Financing (RSF) IT division, works across the full value chain to sustain business activity and enable its acceleration.

This role aims to develop on the Calypso back-office package, in project mode as well as maintenance, and to support the “run the bank” function. It requires a deep understanding of the nature of business operations, timing of activities & data flowing through internal and external systems. The build and support team continuously works with business users, infrastructure engineers and system managers.

Responsibilities

Build & change management:
- Analyse enhancement requests for the repo business and new products.
- Propose solutions in collaboration with Architects.
- Specifications, workload estimates, planning, test scenarios, release documentation.
- Coordinate user acceptance tests.
- Monthly releases, following the team’s milestones for analysis, coding and testing.
- Support the release roadmap in production.

Incidents and Requests management (business users and other IT teams)
- Application support, level 3 (expert).
- Troubleshoot and fix issues/bugs.

Continuous improvement
- Improve operational processes.
- Coach more junior team members as required.

Requirements

• Bachelor’s degree in relevant specialties (IT, finance).
• 8+ years of total working experience.
• 5+ years of experience as a Calypso business analyst on Calypso back office.
• Experience on Calypso versions v14 to v17.
• In depth knowledge of Static Data, Workflows, ScheduledTask, Confirmations, Settlements, Messages / Swift messages, Positions, Accounting, Corporate action, Filters, Reporting Framwork, Reconciliation features.
• Understanding of financial assets (repos, bonds, SLB, issuances) and trade lifecycle.
• Experience with regulatory reporting HRF, NORIA, MMSR.
• Experience in interfacing Calypso with external systems.
• Hands-on experience in implementation projects.
• AGILE track record.
• Experience in implementing NR scenarios.
• Willing to do L3 Support if required.
• Willing to do On-call rotation with team mates to cover night and week-end support.

Position Title: Accountant

Job Summary: To be responsible for managing and providing timely and accurate financial information, maintain financial records, prepare financial statements and ensure compliance with government regulations. You will work closely with other departments to ensure financial data is accurate and up-to-date.

Responsibilities:

• Maintain financial records and ensure accuracy of data and information

• Prepare full set of financial statements including balance sheets, income statements, and cash flow statements

• Help to manage accounts payable and receivable

• Ensure compliance with accounting regulations and standards

• Prepare tax returns (GST) and other statutory filings

• Help to develop and maintain accounting policies and procedures where necessary

• Liaise with external auditor, tax agent and authorities

• Handle other ad-hoc financial and accounting tasks as and when required.

Requirements:

• Bachelor's degree in Accounting, ACCA Part 3 or equivalent

• At least 2 to 3 years of relevant working experience

• Strong understanding of Singapore accounting regulations and standards

• Proficient in accounting software such as MYOB advantageous

• Strong analytical and problem-solving skills

• Excellent attention to detail and accuracy

• Strong communication and interpersonal skills

• Ability to work independently and as part of a team

Job Description:

• Evaluate tender documents and requests for proposals to gain a thorough understanding of project details and requirements
• Lead the QS team and oversee tender cost estimation responsibilities
• Deliver precise and comprehensive quantity and component take-offs in accordance with the specifications outlined in the tender document
• Accurately measure and assess work completed by subcontractors, ensuring timely payment responses and thorough evaluation of VO
• Prepare and submit detailed VO measurements to clients and consultants, maintaining clear and effective communication throughout the process
• Ensure meticulous assessment of costs associated with all VO works
• Provide advice to the project team on contractual rights and obligations
• Monitor and manage project costs to ensure they remain within the approved budget
• Identify and source reliable suppliers and subcontractors
• Generate comprehensive quotation reports
• Conduct accurate and detailed cost estimations

Job Requirements:

• Degree in Quantity Surveying
• Minimum of 5 years' relevant experience in the construction industry
• Strong technical expertise in measurement, cost estimating, construction technology, contracts, and law
• Knowledge of PSSCOC and SIA is an advantage
• Effective team player
• Excellent communication and negotiation skills

The Role: To carry out a plan preventive maintenance work and corrective action in hospital, medical centre, clinics and other associated business unit, and where the scope of work covering the building services, mechanical, electrical, facilities equipment and other associated building maintenance work.

Key Accountabilities:

• To perform a plan preventive maintenance work (PPM) as assigned by supervisor
• Capable in leading a team of technicians in the absence of the Supervisor
• Capable of trouble shooting electrical fault, reinstate power supply and provide recommendation to prevent recurrence
• Capable of trouble shooting air-conditioning fault, reinstate air-conditioning system back to normal and provide recommendation to prevent recurrence
• Capable of repairing burst water pipe, mechanical work, medical gas system and other related facilities equipment.
• To certify all work completed by vendors / contractors

Qualifications and Experience:

• Minimum Qualification: NTC 2 or Higher NITEC and above, or equivalent.
• Minimum 5 years working experiences in M&E works and related field associated to building services.

Skills & Knowledge

• Mechanical & Electrical
• Building Services
• Air conditioning
• Blue Print Drawing

Other Requirements:

A good personality that is able to communicate confidently with patient, doctor & other stakeholders in responding to query, feedback or complaint related to plant operations matter and hospital operations.

Working hours:

Day Shift:

• 4 days - 0830hrs to 1800hrs
• 1 day- 0830hrs to 1730hrs

Night Shift

• 4 days - 2200hrs to 0730hrs
• 1 day - 2200hrs to 0700hrs

5-day work week on rostered basis to work on weekdays, weekends and PH, Max 42 hours.

Job Description & Responsibilities:

Reporting directly to the Assistant Project Manager, Project Manager, Senior Project Engineer is responsible for the following:

• Lead and manage project supervisors to ensure the successful completion of projects.
• Ensure adherence to project budgets, schedules, and scope of work, while deploying appropriate staff resources.
• Review and assess project drawings, plans, specifications, and other relevant documents.
• Identify and troubleshoot issues arising during project execution and implement timely resolutions.
• Conduct and actively participate in weekly site meetings to monitor project progress.
• Collaborate with the Safety Officer to ensure compliance with quality standards and health & safety regulations.
• Monitor site staff to ensure strict adherence to all safety regulations.
• Strong analytical and problem-solving skills, resourceful and meticulous;
• Highly motivated and pro-active with the ability to work both independently as well as in a team;
• Perform night work based on project needs.
• Prepare and submit project reports in a timely manner.
• Develop project drawings, including as-built drawings and shop drawings, as required.
• Perform any other tasks as assigned by the Assistant Project Manager, Project Manager.

Knowledge/ Skills/ Abilities:

• Knowledge of building and structural details, working drawings and local construction practices.
• Knowledge of local regulations and engineering standards.
• Good verbal and written communication skills.
• Good organizational and interpersonal skills.
• Able to work independently and as a team.
• Good time management skills with exceptional attention to detail and ability to manage multiple tasks/ projects at one time.
• Familiar with tender and bidding processes.
• Familiar with local regulations pertaining to building, construction and safety.

Requirements:

· Diploma/Bachelor’s degree in Electrical Engineering or related field.

• Proficient in Microsoft Office (Outlook, Word, Excel and PowerPoint) for Windows.
• Ability to work with flexibility to work long hours when necessary.

· Minimum 5 years of experience in electrical engineering, in Residential/Industrial/Commercial and/ and other types of buildings and/or construction.

• Certification in BCSS (Building Construction Supervisor Safety) or higher safety certification.

· Proficiency in electrical design software (AutoCAD, Revit, Navisworks,BIM360, ACC), strong knowledge of electrical codes and standards, excellent problem-solving and communication skills.

Job Description

• Provide administrative and contractual support and maintain all required project information throughout each project for claim purposes to ensure that the claim data are up-to-date and comprehensive.
• Verify the accuracy of survey data, including measurements and calculations conducted at survey sites.
• Consult with clients, vendors, personnel in other departments or construction foreman to discuss and formulate estimates and resolve issues.
• Prepare progressive claims and potential variaton claims at regular intervals of the project.
• Maitaining proper documentation of correspondence from contract award to job completion to ensure all relevant claims are lodged accordingly to the client timely.
• Ensure proper closing-out of project account finalization.

Job Specification

• At least a degree in Civil Engineering or equivalent.
• At least 8 years of Singapore based Quantity Surveyor working experience in the related field is required for this position.
• Candidate with experience in Engineering, Procurement, Construction (EPC) will be preferred.
• Willing to work in the West.
• Remuneration will be commensurate in according to working experience.

Perform diagnostic analysis of the network system, identify possible faulty devices, troubleshoot faulty modules, troubleshoot network problems and outages and prepare necessary documentation detailing actions taken.

-Monitor system performance and track usage and develop and deliver a trend analysis of system load, usage and response.

-Monitor the reachability of all connections within the network adhering to circuit restoral priorities and initiate troubleshooting to restore full network capability.

-Analyze system functions and failures to isolate and define problem area

Perform diagnostic analysis of the network system, identify possible faulty devices, troubleshoot faulty modules, troubleshoot network problems and outages and prepare necessary documentation detailing actions taken.

-Monitor system performance and track usage and develop and deliver a trend analysis of system load, usage and response.

-Monitor the reachability of all connections within the network adhering to circuit restoral priorities and initiate troubleshooting to restore full network capability.

-Analyze system functions and failures to isolate and define problem area

Job Description:-

1. Responsible for all aspects of drafting electrical and structural drawing of switchboard & control panels for marine and industrial use, incorporating the company's key circuit breaker products.

2. Based on abundant practical experience and extensive knowledge on circuit breakers, produce high class switchboard and control panels drawing according to company’s standard.

3. Manage and lead the project for timely and accurate production of software engineering, electrical drawing and structural drawing.

4. Based on software management skill and rich experience of programming language and software development tools, construct software for control system.

5. By communicating closely with the clients both in Singapore and Japan, responsible for accurately understanding their needs and make sure that the products delivered are perfectly designed to meet their demand.

6. During the periodic inspection of products after delivery, responsible for supervising the on-site inspection to ensure that it is carried out correctly.

7. Take the lead of investigation to solve the issue rapidly in case of any software or system issues, by closely liaising with HQ in Japan.

8. Based on the extensive knowledge of switchboard, circuit breakers and software for railway, marine, cogeneration system, power plant and biomass plant projects, liaise closely with engineers’ team in Japan HQ and clients in Singapore to ensure solutions.

Job Requirement:-

1. More than ten (10) years of experience as software and electrical design engineer in electric power system industry.

2. More than ten (10) years of experience in drawing electrical circuit and outline drawing of switchboard using AUTOCAD.

3. More than five (5) years of experience in using software programming tools for power management system in industrial cogeneration system, specifically with PLC (Omron, Fuji, Mitsubishi, Schneider product etc.).

4. More than five (5) years of experience in communicating with clients as software and/or electrical design engineer, explaining technical details to clients in an easy-to-understand manner.

5. Understand “TERASAKI” products that include circuit breaker, marine and industrial switchboard.

6. Certified as a power generation equipment specialist or equivalent and more than five (5) years of practical experience in power generation of switchboard & control products.

Skills Required:-

・Problem-solving skills in challenging and complex situations

・Project management skills from concept, prototype to implementation

・Excellent communication skill to explain technical matters to clients

・Conversant with Autocad, Software for PLC (Omron, Fuji, Mitsubishi, Schneider product).

・Certificate of 1st grade Electrical drafting specialist or equivalent

・Certificate of power generation equipment specialist

Perform diagnostic analysis of the network system, identify possible faulty devices, troubleshoot faulty modules, troubleshoot network problems and outages and prepare necessary documentation detailing actions taken.

-Monitor system performance and track usage and develop and deliver a trend analysis of system load, usage and response.

-Monitor the reachability of all connections within the network adhering to circuit restoral priorities and initiate troubleshooting to restore full network capability.

-Analyze system functions and failures to isolate and define problem area

Perform diagnostic analysis of the network system, identify possible faulty devices, troubleshoot faulty modules, troubleshoot network problems and outages and prepare necessary documentation detailing actions taken.

-Monitor system performance and track usage and develop and deliver a trend analysis of system load, usage and response.

-Monitor the reachability of all connections within the network adhering to circuit restoral priorities and initiate troubleshooting to restore full network capability.

-Analyze system functions and failures to isolate and define problem area

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC

• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.

• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.

• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.

• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.

• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.

• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status

• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.

• Shall be capable of developing work instructions for users of AVEVA NET.

• Must understand company goals and implement management directives and policies.

• Anticipate potential problems and take preventive actions.

• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.

• Shall train the MODEC users on the AVEVA NET application in projects.

• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when

• Contribute to continuous improvement of company work methodology/procedures.

• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

• Training in AVEVA NET administration

Relevant Experience:

a) 5-10 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

Basic information

• Location: Central
• Working hours: 5 days work week: Fair Rotational Shift
  
  3 shift patterns (dependent on locations):
  OA shift: 7.30am to 5pm / 7am to 4.30pm
  OB shift: 1 to 10.30pm / 1.30pm to 11pm
  OC shift: 10pm to 7.30am / 10.30pm to 8am

Job scope:

• Provide courteous and efficient service and if possible to comply with each and guests’ request.
• Ensure that all telephone calls are handled promptly within three rings.
• Be familiar with all room types and rates in the hotel and their availability status; up-sell whenever possible.
• Take ownership of problems, handle guest complaints promptly according to established procedures and then report to supervisor for further follow up when necessary. Glitch reports are to be written when necessary.
• Ensure guest room security, emergency and fire procedures; encourage the use of Safe Deposit boxes (El-Safe) and adhere to policies & procedures for their use.
• Be familiar with hotel facilities and functions as well as major city attractions and events; provide guests with accurate information as requested.
• Ensure a professional and courteous working relationship and maintain an effective flow of communication with all hotel personnel.

Job requirement:

• Minimum Diploma in Hospitality
• Able to perform rotating shifts
• Positive attitude and outgoing personality and good public relations skills
• Previous experience in hospitality and Opera knowledge will be advantageous

For interested candidates, please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

Job Description & Requirements

Job Responsibilities:

• To do regular patrolling within the Resort premises at regular intervals during shift
• Conduct investigations if a breach of security is suspected
• Monitor Resort premise via CCTV
• Report and complete all incidences in the Incident Report Forms for record purposes and further actions by higher management
• Proper issuance and recording of staff access cards
• Ensure part-timers are planned in accordance to approval from higher management
• To participate in fire alarm drills and equipped to manage Fire Alarm panels
• Be the escort and/or witness when needed
• Undertake any other duties as assigned from time to time.

Requirements:

• Candidate must have completed minimally Secondary School “O” Levels, and/or NITEC / Diploma in Safety and Security
• At least 3 years of working experience in the related field is required for this position
• Candidates must be able to converse and write in English
• Candidates must also display alertness, good communication skills and honesty.
• Extensive walking within Resort premises is needed
• Willing to do shift work.
• Possesses a Security License

We are seeking a highly skilled and experienced Design Engineer to join our Design team. The successful candidate will be responsible for designing and developing custom mechanical systems and components for Asphalt and Concrete plants, as well as overseeing their fabrication and testing.

Responsibilities:

• Design and develop custom mechanical systems and components using CAD software (e.g. SolidWorks, Inventor, Creo)
• Collaborate with cross-functional teams, including Electrical and Software Engineers, Project managers, and Fabrication Technicians, to ensure successful project outcomes.
• Oversee the fabrication and testing of mechanical systems and components
• Develop and maintain project timelines and budgets.
• Perform research and analysis on materials, components, and systems to ensure optimal performance and cost-effectiveness.
• Participate in project meetings and provide technical expertise and guidance as needed.
• Ensure compliance with all relevant safety regulations and standards.

Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field
• Minimum of 8 years experience in mechanical design and fabrication
• Proficiency in CAD software (SolidWorks preferred)
• Strong knowledge of mechanical design principles and practices
• Experience with the design and fabrication of complex mechanical systems and components
• Strong problem-solving and analytical skills
• Excellent communication and interpersonal skills and the ability to converse and write in English.
• Ability to work independently as well as part of a team.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 5 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description

• Manage the company’s projects
• Coordinate between client, company, factory and work site staff
• Work on ensuring good quality and maintain delivery schedules
• Liaise with QA/QC for the third party/client inspections, class survey certification, etc

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 4 years of working experience in similar industry
• Good written and spoken English
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Leadership qualities expected
• Able to plan and manage project independently
• Come and convince us why you are the best person for the job

Job Overview

The Senior Contracts Officer will manage, negotiate, and administer contracts to ensure compliance with company policies, client requirements, and industry standards within the FPSO sector. This role is critical for supporting project execution, mitigating risks, and ensuring that all contractual obligations are met efficiently.

Key Responsibilities

• Contract Drafting and Administration:Prepare, review, and revise contracts, ensuring alignment with company standards and legal requirements.
  Maintain a comprehensive database of contracts and monitor their lifecycle.
  
• Negotiation:Support the negotiation of contract terms with clients, vendors, and subcontractors to achieve favorable terms.
  Resolve contractual disputes promptly and amicably.
  
• Compliance and Risk Management:Ensure adherence to legal, regulatory, and contractual obligations specific to FPSO operations.
  Identify and mitigate risks in contracts to safeguard company interests.
  
• Coordination and Communication:Collaborate with internal teams, including legal, procurement, and project management, to align on contractual terms.
  Serve as a liaison between the company and external stakeholders regarding contractual matters.
  
• Reporting and Documentation:Prepare detailed reports on contract performance, risks, and compliance.
  Maintain accurate records of contractual documents for audits and future reference.
  

Qualifications and Experience

• Education:Bachelor’s degree in Law, Business Administration, or a related field.
  
• Experience:Minimum of 10 years of experience in contract management, preferably in the oil and gas or FPSO industry.
  Strong understanding of commercial terms, legal frameworks, and industry-specific requirements.
  
• Skills:Proficiency in contract management software and tools.
  Excellent negotiation, analytical, and communication skills.
  Detail-oriented with a strong ability to handle multiple tasks under tight deadlines.
  

Preferred Qualifications

• Knowledge of FPSO design, construction, and operational contracts.
• Familiarity with international maritime and oil and gas regulations.
• Certification in contract management (e.g., IACCM, NCMA) is an advantage.

Project details

Our client is the corporate and investment banking arm of The Group, world’s 12th largest bank by total assets.
We work daily with international branches located in 30 markets by:
- Envisioning and preparing the Bank’s futures information systems
- Partnering and supporting core banking flagships and transverse areas in their large scale development projects.
- Providing premium In-house Banking applications,
This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.
We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

We are seeking a talented Software Engineer with a strong aptitude for programming to join our dynamic Capital Market Department!

Responsibilities

• Research, design, and develop computer and network software or specialised utility programs. Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.
• Identify and resolve issues which have organisation wide and long-term impact. Identify security risks, creates requirements to capture security issues, and performs initial threat modelling to ensure coding standards meets security requirements
• Develop and maintain the software configuration management plan and oversees the building, verification and implementation of software releases. Provide guidance and technical support to the quality testing teams.
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Collaborate with cross functional teams (business analysts/ support teams… ) to ensure smooth integration of new features and updates and troubleshoot, debug, and resolve application-related issues
• Stay updated on industry trends, emerging technologies, and regulatory changes relevant to capital markets.
• Participate to proof of concept for new technology R&D
• Contribute to continuous improvement and automation by leverage your programming skills to create custom tools and scripts that automate repetitive tasks and reduce manual effort.
• Develop scripts and automation tools using Python, shell scripting, and other basic programming languages to streamline processes and improve efficiency
• Engage and support others in the team, readily put forth his ideas in a clear and compelling manner.
• The candidate should have analytical and problem solving skills, a pro-active mind-set in security, proven ability to work individually under pressure. Team player with good interpersonal skills. Very good communication skills and keen to work with business users.
• Collaborate with computer hardware engineers (CAGIP and ITS) to integrate infrastructure constraint (whether in-premise or cloud) hardware and software systems aligned with capacity, develop specifications and performance requirements.
• Build management:
- Develop in JAVA for Calypso v14.4 package.
- Develop internal components.
• Incidents and Requests management (business users and other IT teams)
- Communicate effectively.
- Analyse enhancement requests and bug-fixes.
- Document deliveries.
• Change Management
- Apply monthly release strategy, following the team’s milestones for analysis, coding and testing.
- Support the release roadmap in production.
- Operations management
- Application support, level 3 (expert).
- Troubleshoot and fix issues.
• Continuous improvement
- Process improvements.
- Coach more junior team members as required.
• Research, design, and develop software.
• Analyse user needs and develop software solutions
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Work with other engineers to integrate hardware and/or software systems
• Develop specifications and performance requirements.

Requirements

- Good understanding of Overall Calypso Architecture
- Hands-on Calypso development and customizations, like Scheduled Tasks, Reports, Engines
- Understanding and application of Calypso APIs
- Strong Java, SQL and XML skills
- Good analytical skills, should be able to analyze and resolve production issues
- Good understanding of Calypso's message and sender frameworks
- Ability to write SQL queries and understand Calypso database tables
- Good and effective communication skills
- Understanding of Fixed Income Markets & Products

Job Description:

• Ensure high quality and timely completion of the assigned work within the established time, budget, including ensuring technical accuracy of drawings, material quantities, specifications, procedures, etc. produced by the Civil and structural discipline
• Prepare, Review, Check, Issue, and follow up on all Civil and structural deliverables up to the issue for the construction stage
• Perform engineering design calculations check and prepare design sketch as required
• Perform/ review steel connection design and steel fabrication drawing review
• Coordinate with other disciplines for inputs/comments on Civil and structural drawings before the construction issue
• Assist in internal & client model reviews in line with Company procedure
• Coordinate with the and Qualified Persons (QP)/ Professional Engineers (PE), involved in the project for timely delivery of Civil and structural documents for local permitting and authority submission
• Provide prompt resolution for all site issues and ensure no delay on the construction due to engineering & constructability issues
• Perform good communication/ coordination with Client

Requirements:

• Min degree in Civil Engineering
• Min 8 years of experience in design, coordination and field engineering of process plant or industrial building development (such as chemical/petrochemical plant/ incineration plant/ food waste, water/wastewater plant/ oil & gas/ refinery/ power/ pharmaceutical etc.)
• Hands on experience working in fast paced, diverse and multi-disciplined coordination
• Adapt with software for Civil/ Structural (both Concrete and Steel) design calculations such as STAAD.Pro, SAP, ETABS, SAFE, TEDDS, Idea Statica, Limcon, etc
• Have knowledge on AutoCAD, Revit, Tekla software for Structural Steel fabrication
• Familiar with Microsoft Word, Excel Spreadsheets, PowerPoint
• Conversant with Local and International Design Codes and Standards such as Euro Codes, British and American Codes for Civil Structural design
• Have knowledge in Local Singapore Civil & Structural Permitting Requirements
• Familiar with Civil & Structural design and drafting activities including ability to review 3D Design, SPR, Navisworks etc. and ability to manage/supervise BIM team
• Able to lead, motivate & guide a team comprising of Engineers/ Designers
• Must have experience in manpower planning and CSA design deliverables execution planning

Responsibilities:

• Source for Mechanical/Electro-Mechanical/Electronics components to support new projects
• Able to perform cost analysis and select best supplier to meet the product requirement
• Responsible in managing the relationship with the suppliers for all commercial issues
• Perform cost reduction, VA/VE activities, etc. to achieve the KPIs set by management such as the material cost reduction target
• To be able to implement supply management strategies and activities such as VMI, JIT, EDI capabilities, etc.
• Be the escalation point when there are delivery issues during the MP and NPI stages
• Management of SAP data integrity

Requirements:

• At least a Diploma in Engineering
• Minimum 2-3 years of working experience in the EMS or electronic manufacturing environment
• Experience in sourcing, purchasing or procuring of Mechanical/Electro-Mechanical/Electronics components
• Strong knowledge in Mechanical/Electro-Mechanical/Electronics commodities
• Knowledge in SAP will be an added advantage

Interested candidates are to submit a detailed resume to speed up the application process.

Only shortlisted candidates will be notified. Thank you for applying.

Roles and Responsibilities:

• Responsible for preparation and delivery of process calculations, design drawings and other documents for water, wastewater treatment, and air treatment projects.
• Aware the requirements for full compliance to local authorities
• Conduct process calculations such as treatment unit sizing, pipe or ducting pressure losses for above mentioned projects.
• Design PFD, P&ID drawings for these projects.
• Select equipment or propose the parameters for selection of equipment such as pumps, fans.
• Design the layout and section views of the overall treatment system including process treatment units, equipment, and pipings and ductings with the help of drafters.
• Prepare other textual documents in process discipline such as control philosophy, datasheets.
• Evaluate technical documents from subcontractors and suppliers.
• Coordinate the works with mechanical engineers, and electrical, control and instrument engineers.
• Provide technical support to sales and project teams.
• Develop or provide design recommendations, value engineering and training to clients or co-workers
• Liaising with other departments (Project, QAQC or Commissioning) on schedule and deliverables timeline.
• Report to engineering manager.

Requirements:

• A recognized degree in environmental engineering, chemical engineering, mechanical engineering, or all other process related engineering.
• 3 years above work experience in water, wastewater treatment, or air treatment.
• Master degree holders with less experience will be considered.
• Proficiency in CAD, MS office or other design softwares.  Strong analytical and problem solving, critical thinking skills.
• Experiences in ultrapure water treatment, air treatment scrubbers, and thermal oxidizers are preferred.
• Good writing and communication skills.