Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilities:

• Conduct mooring analyses, installation analyses, riser analyses, sea fasteningdesign, and diffraction analysis
• Deliver engineering deliverables to support specific projects either independently or through the management of internal and external resources
• Develop operational procedures for offshore utilization
• Identify equipment requirements for projects, including rigging design, and interface with sales and/or rental departments for procurement and delivery
• Develop mobilization and demobilization plans
• Create, maintain, and report project schedules as required
• Attend meetings with clients and sub-contractors
• Actively participate in HIRAs and QHSE-related activities
• Produce scopes of work for sub-contractors
• Attend and oversee offshore operations during execution phases to ensure adherence to procedures and guidelines
• Travel offshore and internationally as required

Requirements:

• Honours degree accredited by the Engineering Council in Naval Architecture
• Classification of at least 2:1, although relevant experience may be accepted in exceptional circumstances
• Five years of post-graduate experience, which can be reduced if other relevant experience can be demonstrated
• A minimum of 5 years' experience working within the Energy Industry, specifically Oil and Gas or Renewables
• Competency in a mooring analysis software with a knowledge of Orcaflex, Ariane, Hydrostar, Moses, GMOOR (or similar) being advantageous
• Project experience coupled with business acumen, the ability to apply knowledge, and the confidence to act as required
• Strong leadership skills with a willingness to further develop themselves and the assigned team
• Excellent communication skills in both written and verbal forms with highly effective inter-personal skills supported by good attention to detail
• Ability to travel offshore and internationally as required

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

1. Team up with chemists to lead a team of lab analysts and technician in executing daily laboratory operations, ensuring compliance with accreditation standards and quality system implementation.
2. Develop and validate analytical methods for the testing of chemical compounds, ensuring accuracy, precision, and reliability. Identify and drive initiatives to enhance laboratory operational efficiency and productivity.
3. Manage laboratory inventory and equipment, including consumables/spare-parts inventory, equipment calibration, troubleshooting, and maintenance planning, to meet quality and operational requirements consistently, ensuring analytical tools are in proper working condition for accurate testing and analysis.
4. Provide support in new product development processes (R&D), analytical metrology, and quality assurance for all products, offering product expertise, providing technical support for new product developments, and addressing technical emergencies.
5. Collaborate with other departments on continuous improvement projects to achieve business objectives.
6. Perform Quality Control (QC) responsibilities, including conducting quality tests, inspections, and analyses to ensure product integrity and compliance with standards and specifications.
7. Investigate deviations, out-of-specification results, and quality-related issues, and implement corrective and preventive actions (CAPAs) as necessary.
8. As quality master to understand product quality, to ensure product to fulfill customer’s requirement.

Job Requirements:

1. Master's Degree in Chemistry with 2 – 3 years relevant working experience in QC lab or a Bachelor’s Degree in Chemistry with 5 – 6 years relevant working experience.
2. Working experience or significant exposure to specialty chemicals or semiconductor wafer fab supplier environments is considered an added advantage.
3. Strong hands-on instrumentation experience such as ICP/MS, GC/MS, UV-Vis, GC/FID/TCD, IC, HPLC, ICP/OES, NIR, and other measurement tools.
4. Excellent written and spoken communication skills in bilingual languages (English and Mandarin) to liaise with English and Mandarin-speaking associates/clients.
5. Hardworking, able to multi-task, and willing to work long hours when necessary
6. Team player with excellent interpersonal skills and a strong sense of ownership with responsibilities to achieve project and business objective
7. Ability to work under pressure, prioritize workload, be systematic, and make sound decisions in a fast-paced environment.
8. Willingness to travel when required.

Job Responsibilities:

1. Responsible in the daily operations of HR and Admin functions.
2. Responsible in managing job applications, scheduling for interviews, leave management etc.
3. To support in development and implementation of HR policies, plans, processes, programs, and projects.
4. Work with the cross department leaders and provide support and coaching to deliver actions that will drive people and organization performance to support delivery of organizational growth and business objectives.
5. Work closely with local government agencies to attract local talents.
6. Responsible for work passes application/ renewal/ cancellation/ appeals.
7. Support training and other governmental grants as well as coordinate all training courses and programs for staff.
8. Maintain and update Company's rules & regulations and 5S best practices.
9. To drive and maintaining Company culture, team spirit.
10. To drive employee’s engagement activities of Company event and teambuilding activities.
11. Taking charge of stationery and pantry supplies.
12. Upkeep and improve office working environment.
13. Manage corporate gifting.
14. Other ad-hoc duties as assigned.

Requirements:

1. Degree in Human Resource Management, Business Administration or equivalent.
2. Minimum 5 years of relevant working experience.
3. Knowledge of Singapore Employment Act would be advantageous.
4. Proficiency in MS Office (Word, Excel, Power Point).
5. Hands-on, organized, self-driven and detailed oriented.
6. Able to multitask in a fast-paced working environment.
7. Able to work long hours and work under tight timelines.
8. Posses entrepreneur spirit.
9. Fluent written and spoken communication skills and presentation skills.

Job Description

Responsibilities:

Scope covers procurement, contracts, cost control, cashflow, project budgeting, project administration, claims, cost analysis etc.

· Tabulate quantities, estimate cost and request for quotation

· Knowledge of construction products and costings

· Updating contract documents, drawings, and correspondences

· Submission of progress claims and site valuations

· Preparation of Variation Order for submission

· Liaise with subcontractors and clients

· Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.

· Ensure timely completion of an assigned projects.

Requirements:

· Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent

· Minimum 2 years of QS experience

· Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)

· Independent, resourceful, pro-active and responsible

· Work under tight timeline

· Must be team player

Job Level & compensation offered may vary depending on candidates’ experiences and competencies.

Analyzes biological or chemical samples and/or develops/validates methodologies for various compounds and components in compliance with appropriate standard operating procedures (SOPs) and regulatory agency guidelines.

Responsibilities:

• Documents work and maintains study documentation and laboratory records.
• Independently sets up, maintains, operates and performs routine and non-routine maintenance on general equipment, including problem identification and resolution.
• Informs project management and/or line management of any problems and/or deviations that may affect the integrity of the data and recommends corrective action.
• Promotes a cohesive team environment.
• Suggests and performs modifications to test methods or procedures where precedence exists.
• Provides input and participates in project meetings, plans, monitors and guides project work.
• Serves as lead chemist on projects, overseeing a small group of technical staff, with minimal supervision.
• May interact in external client communications.
• Sets up and performs method development and validation of various analytes in a variety of matrices with limited supervision.
• Organizes, conducts and evaluates analytical results and testing.
• Performs QC review of data.
• Maintains a clean and safe laboratory work environment.
• Performs other related duties as assigned.
• Trains and assists less experienced staff.
• Participates in process improvement initiatives.
• Writes, revises and reviews methods, SOPs and portions of reports and protocols.
• Participates in client visits as needed, assists in communicating technical information.
• Effectively plans and utilizes personnel and resources for timely completion of assigned projects.
• Assists in evaluation of data for incorporation into written reports.

Requirements :

• Master degree in chemistry or related field with min. 5 years of previous laboratory experience. Relevant experience may be substituted for education.
• Minimum 3 years of experience with method development for quantitative analysis of clinical samples using LC-MS
• Excellent hands-on skills with sample extraction using PPT, LLE, SPE etc
• Experience with use and trouble shooting of analytical equipment is desired.
• Good team work
• Basic knowledge of computers and software programs.
• Familiar with the use of standard laboratory equipment.
• Effective communication (verbal and written), presentation and interpersonal skills.
• Ability to perform advanced computer skills (e.g., Word, Excel).

Responsibilities:

1. Assist to perform full spectrum of HR operations duties
2. Assist to work closely with business units to execute HR policies and government statutory requirements effectively and ensure compliances
3. Learn to perform full cycle of payroll
4. Assist to perform training administration duties and training grant application
5. Assist to perform staff off-boarding process
6. Perform application, renewal and cancellation of work passes
7. Maintain HR database in system and P files
8. Assist to manage foreign worker work pass quota
9. Assist to respond to government surveys
10. Assist to perform HR reporting required by Management
11. Assist to implement HR initiatives and company staff well-being activities

Requirements:

1. Diploma or Higher Nitec / Nitec in HR Management or related field
2. 6 - 12 months of experience in HR duties. Fresh Diploma / Higher Nitec / Nitec graduates who are keen to learn HR jobs are welcome to apply
3. Keen and willing to learn
4. Able work under a fast-paced work environment and multi-tasked
5. Able to put into efforts to ensure work is accurately carried out
6. Good communications in written and spoken skills

Others Information:

1. 5-day work week
2. Medical, dental & insurance benefits
3. Daily meal subsidy
4. Company Transport: 2 ways from Jurong East

Responsibilities:

• Perform the role of HR Business Partner
• Payroll administration
• Assist in human resource functions and administrative matters
• Maintain proper documentation of employee records and update HRMS accurately and promptly
• Work pass application/renewal/cancellation for foreign employees
• Prepare HR related reports
• Be Involved in staff welfare activities when required
• Undertake other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Human Resource Management / Business Administration
• Minimum 6 years of relevant working experience in HR Administration, preferably in Construction industry
• Knowledge in using Info-Tech system or willing to learn a new HRMS
• Good knowledge in Employment Act and foreign work pass procedures
• Good communication and interpersonal skills
• Mature, sensitive and discreet in dealing with confidential matters
• Proficient in MS Office
• Resourceful, well organized, meticulous and proactive
• Able to work independently with minimum supervision
• Committed to complete tasks and to provide updates in a timely manner
• Able to start work immediately preferred

Job Descriptions

• Provide administrative and contractual support and maintain all required project information throughout each project for claim purposes.
• Ensure that the claim data are up-to-date and comprehensive.
• Prepare progressive claims and potential variation claims.
• Be able to do quantity measurement.
• Prepare RFQ package and source supplier and subcontractors.
• Review and compare quotations received, including clarifications correspondences.
• Highlight difference and commercial risks.
• Prepare agreements draft by using given template.
• Review subcontractor/supplier’s claim and prepare payment response.
• Maintain proper record of project costs.
• Ensure proper closing-out of subcontracts/supply agreement.
• Support in project account finalization.
• Other quantity surveying duties assigned.

Requirement

• At least a degree in Quantity Survey, Civil or Mechanical or equivalent or equivalent;
• At least 5 years of Singapore based contract management experience in EPC project environment.
• Sound knowledge of preparing contract close-out documents, monthly reports, interim and final payment applications.
• Good contractual and commercial mind set in working;
• An excellent diplomat and communicator in English, spoken or written.
• Familiar with public project contract administration, including using PSSCOC for contract administration at least for two projects.
• Experience in a project involves D&B for industry plant project will add value.

Responsibilities:

• Support the Project Director (PD) in project functions, including project management, site management, and risk control to achieve project goals.
• Lead and mentor the project team by setting guidelines, providing advice, and supervising as needed.
• Oversee all project management activities from planning and coordination to completion within budget, schedule, and quality standards.
• Assist PD in compiling project progress reports (e.g., Monthly Report, VO Management, EOT Assessment, Project Progress Updates).
• Monitor the project schedule and manage daily operations, setting short- and long-term goals, coordinating with other contractors.
• Conduct technical reviews to ensure contract compliance and adherence to completion timelines.
• Liaise with clients, consultants, and contractors, attending regular meetings to ensure project progress.
• Supervise site labor and subcontractors, resolving construction issues as they arise.
• Oversee quality control, safety, and EHS practices on-site, identifying high-risk activities before construction and approving Method Statements.

Requirements:

• Degree in Civil Engineering or equivalent, recognized by the Singapore Professional Engineers Board (PEB).
• At least 10 years of experience in the construction industry.
• Experience in LTA, roadworks, MRT, and viaduct projects.

_____________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 8 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Job Responsibilties:

• Plan and design mechanical engineering works for building services.
• Prepare reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Conduct design presentations, review shop drawings and material/equipment submissions, handle RFIs and other contract administration duties.
• Oversee the installation, testing and commissioning of Mechanical engineering works.

Job Requirements:

• Degree in Mechanical Engineering from a University recognized by the Professional Engineers Board, Singapore.
• Minimum 3-5 years of relevant experience in mechanical engineering design.
• Good working experience in a consulting firm with proven track records in major development projects.
• Knowledge of mechanical engineering design systems software.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.
• Conversant with local codes and regulations, and authority submission procedures.
• A team player, able to work both independently and as a group, ensuring excellent project delivery to Clients and other stakeholders.

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

Job Description:

• Manage and prepare the measurements and cost estimates for the construction projects from initial calculations to the final accounts.
• Prepare tender and contract documents, including bills of quantities.
• Evaluate tenders from contractors and subcontractors and, where appropriate, negotiate with the contractors.
• Prepare contract documents in accordance to the regulations.
• Prepare cost analysis and monitor project overruns to ensure the objectives of the project is achieved.
• Access payment and variation works to client and subcontractors to facilitate the smooth workflow process.
• Communicate with the client, management, sub-contractors and keeps track of the progression of both main contract and sub-contract.
• Monitor and keep track of project progress and are responsible for the measurement and valuation of variations in the work during the contract, for agreement of interim payments and the final account.
• Perform all duties in accordance with CCCC policies, processes, systems and procedures.
• Any other adhoc tasks assigned by superior.

Job Requirements:

• Bachelor's Degree in Quantity Survey or equivalent.
• More than 4 years of working experience in the related field is required for this position.
• Acquired with both civils and architectural knowledges is preferable.
• Good communication and negotiation skills.
• Experience in LTA project, or similar scale, complexity and nature of work will be advantages.
• 5.5days work week

Job Responsibilities:

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Supervise the installation, testing and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Job Title will correspond with project experience acquired and individual competency in technical knowledge/skills, project management and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognised by the Professional Engineers Board, Singapore.
• Ideally registered with the Professional Engineers Board, Singapore.
• Minimum 6-8 years of relevant experience in Mechanical engineering design for building services and infrastructure works.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.

• Oversee and direct construction projects from conception to completion
• Review the project in-depth to schedule deliverables and estimate costs
• Oversee all onsite and offsite constructions to monitor compliance with building and safety regulations
• Coordinate and direct construction workers and subcontractors
• Select tools, materials and equipment and track inventory
• Meet contractual conditions of performance
• Review the work progress on daily basis
• Prepare internal and external reports pertaining to job status
• Plan ahead to prevent problems and resolve any emerging ones
• Negotiate terms of agreements, draft contracts and obtain permits and licences
• Analyse, manage and mitigate risks
• Ensure quality construction standards and the use of proper construction techniques

About JobTech

JobTech is the world's leading artificial intelligence and big labour data analytics product company that empowers leaders to develop people for new work realities, driven by real labour market needs and individuals' personal aspiration. JobTech is growing rapidly with global big names customers from both private and public sectors.

About the Team

The JobTech team is an enthusiastic bunch, obsessed with solving human capital business problems in talent development, using deep technology and labour market data. We embrace empowerment and appreciate the depth of every member’s area of expertise. We are hands-on dreamers who are willing to invest in projects and people. If you think you should be part of this awesome team looking to scale faster and better, don’t be shy and let us know!

Job Description

JobTech is a product start-up looking to solve real world labour problems and deliver the best possible experience to our end users. In this unique role, you will be responsible for understanding and translating business needs into innovative product designs that meet customer pain points and drive business success.

• Define the product vision, strategy, and roadmap based on market research, competitive analysis, and customer insights.
• Create high-fidelity mockups and prototypes that effectively communicate interaction and design ideas.
• Work closely with stakeholders to gather and prioritise product requirements.
• Collaborate with engineering, design, marketing, and sales teams throughout the product development lifecycle.
• Conduct sprint planning and manage Agile processes to ensure timely delivery of product features.
• Develop and maintain product documentation including specifications, user stories, and release plans.
• Monitor and analyse product performance metrics, user feedback, and support requests to iterate on the product and drive improvements.
• Champion the product internally and externally, providing product expertise and support as needed.
• Ensure alignment of product initiatives with company goals and objectives.

Requirements

• Proven experience as a Product Manager or similar role in a technology-driven company.
• Strong understanding of SaaS products and familiarity with Agile/Scrum methodologies.
• Excellent communication, interpersonal, and leadership skills, with a proactive approach to fostering collaboration and driving initiatives forward.
• Ability to translate business strategy and user needs into product requirements.
• Analytical mindset with strong problem-solving abilities.
• Experience in conducting competitor analysis and using findings to drive product strategy.
• Knowledge of sprint planning and Agile development practices.
• Knowledge of design software, such as Figma is a plus.

Compliance with our strict information security policies is mandatory

• Policy Compliance: Adhere to JobTech's information security policies and procedures.
• Risk Management: Identify, assess, and mitigate security risks to protect sensitive information.
• Incident Response: Participate in the detection, analysis, and response to security incidents.
• Security Training: Attend regular training on information security best practices.
• Data Protection: Ensure the confidentiality, integrity, and availability of JobTech data.
• Regulatory Compliance: Ensure compliance with relevant legal, regulatory, and contractual requirements related to information security.
• Team Collaboration: Work closely with other functional departments to ensure cohesive security measures.
• Confidentiality: Maintain the confidentiality of sensitive information and enforce data protection measures.
• Continuous Improvement: Stay updated on the latest security trends and continuously improve the JobTech's security posture.Product Manager

Company Description

At MCI Career Services Pte Ltd, we take pride in our reputation as a leading and trusted leader in recruitment and human resources and uphold our commitment to deliver dedicated and genuine service to our candidates and corporate clients. We are an expert in sourcing and placements of local staff with an emphasis on permanent, temporary and contract placements and we specialised in providing outsourcing and HR/Payroll support services to a plethora of industries.

MCI Group of Companies, collectively known as a group has multiple subsidiary companies such as MCI Career Services, MCI Consulting, MCI Outsourcing and MCI Event and Production Pte Ltd. Over the years, we have grown to a team of more than 100 dedicated employees across two offices in Singapore and Malaysia.

As an Enterprise 50 company, we are honored to be recognized as one of the top 50 most enterprising, privately-owned local companies who have contributed to Singapore’s economic development, both locally and internationally, in 2019, 2021, and 2023.

We are also pleased to announce that our subsidiary, MCI Outsourcing Pte Ltd, has won the Gold Award for Best Recruitment Firm – Outsourcing Solution at the prestigious HRM Asia Readers’ Choice Awards 2023.

Company Culture & Perks of Joining MCI Career Services

As we continue to expand, we seek talented individuals who value collaboration, are results-driven, and are passionate about personal and organizational growth. We welcome fresh ideas, diverse perspectives, and feedback from our employees to enhance our business processes and work culture. Additionally, we focus on providing training to equip our employees with the skills needed to excel in their roles, and we are committed to develop leaders who inspire, empower, and support the growth of our junior employees. In addition to mentoring opportunities, employees also have access to cross-departmental training, enabling them to take on new roles and expand their expertise.

At MCI, we believe in recognizing and rewarding performance based on merit. In addition to honoring our top sales performers with uncapped commissions, we are one of the few recruitment consultancy firms that provide employees with the opportunity to broaden their horizons and gain cultural exposure through company-sponsored trips to destinations such as China, Korea, and even Europe!

To express our gratitude for our employees' dedication, we present annual appreciation awards to celebrate their years of service with us.

Whether it’s individual milestones like birthday celebrations and promotions or team accomplishments like team bonding activities, we cherish and celebrate the achievements and moments that our employees have with us.

To promote employee well-being and maintain a healthy workforce, we have provided comfortable massage chairs in the office for relaxation, employee-led bimonthly recreation sports event and more! If you are passionate and ready to take on new challenges, we invite you to join our team and work with us to drive MCI to a greater success!

Job Overview:

We are looking for a People-Oriented, Results-Driven Operations Manager to join our team at MCI Career Services.This individual will play a crucial role in enhancing and streamlining our internal business processes, ensuring efficient, cost-effective, and scalable delivery of recruitment services to our candidates and clients.

Key Responsibilities:

1. Business Process Improvement:

• Develop operational guidelines that standardize best practices on recruitment, client and vendor management, ensuring a positive experience for our candidates, clients and vendors
• Evaluate and refine operational workflows to enhance efficiency and ensure maximum productivity.

2. Strategic Planning & Execution:

• Collaborate with senior leadership to design, implement, and monitor business strategies that align with organizational objectives
• Oversee and ensure successful execution of strategic initiative

3. Stakeholder Communication & Collaboration:

• Serve as the liaison between the operations, talent acquisition, business development teams, and other departments to ensure alignment towards company goals.
• Address and resolve operational issues promptly and effectively

4. Reporting & Data Driven Decision Making:

• Generate monthly reports and analyze performance of business processes to provide actionable insights to improve resource utilization and operational efficiency

5. Cost-Control

• Manage annual expenses, ensuring expenditures are kept within planned annual budget.
• Track actual sales performance against targets and identify opportunities for revenue growth and enhance profitability through cost-control measures

Requirements:

• Bachelor’s degree in Business Administration, Operations Management, or a related field.
• 5 to 8 years of experience in an operations management role
• A proven track record of driving business process improvements and operational excellence, with experience in data-driven decision-making.
• People-oriented with strong leadership and problem-solving skills.

If you are passionate about optimizing business operations and leading teams towards success, we would love to hear from you!

Kindly click to APPLY NOW or email your CV to [email protected]. If you do not possess the above experiences, your application will still be considered on individual merits and you may be contacted for other job opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified. **

Ong Jun Kiat

Registration Number: R23117387

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Job Description & Requirements

Roles & Responsibilities

Job Scope:

Manage all the variation claims with Client and coordinate with JV partner and internal stakeholders including preparation of documentation, substantiation as per contract requirements, timely submission, meeting coordination and follow up till the conclusion of each variation/ claim.

Manage change order/ variation claim from subcontractors and prepare change order/ in support of variation order claims to client, and keeping track of all change orders

Work closely with Project teams/ various disciplines (Engineering, Construction, Procurement, Subcontractors, etc.) and coordinate the timely contract price adjustment/ claims including internal reviews/ approvals

Manage full spectrum of respective subcontracting works, measurement/ bill of quantities, cost plus and adjustable items as per claim requirements.

Prepare tender/ subcontract document, bid/ subcontract checklist and prepare bid/subcontract evaluation and summary

Ensure main contract terms, project specification and requirements are incorporated in the bid documents and subcontract document

Monitor, review and check subcontractors’ milestone/progress claims and invoice on timely manner, and coordination with internal cost control/ finance department for payment processing

Manage/ administer the subcontracts with subcontractors

Issue work order

Organise kick off meeting and other ad-hoc meetings with subcontractors

Handle and maintain performance securities with subcontractors

Manage day to day contractual correspondences with subcontracts including contractual letters preparation and tracking of incoming/outgoing letters

Procure all subcontracting work within budget and in accordance to comply financial guideline

Monitor subcontracting cost and ensure within allocated budget

Subcontract close out / settlement of contractual disputes related to subcontracts, final accounting, completion certificate, etc.

Participate in monthly cost review, if required. Manage warranty/ defect claims if any.

Participate in Project meetings, interface with cost control, procurement and others

Ad hoc assignment

Requirements:

Degree / Diploma in any Engineering disciplines or Quantity Surveying.

5 to 10 years of experiences in contract / claim administration

Familiar with offshore platforms, modules, FPSOs, jackets, etc. and onshore petrochemical plants, renewable energy era will be an added advantage

Good team player and able to work independently with minimal supervision

Willing to commit overtime as and when required

IPS is hiring! We are looking for a talented Senior Process Manager - Biopharma to join our industry leading Process Engineering team at our growing office in Singapore.

The Sr. Process Engineer will assist senior staff with designing and implementing manufacturing processes, equipment and plants (from pilot to fully operational) for Biotech and Pharmaceutical Projects. The assignments include specific tasks on project teams and the Process engineer should use their education, creativity and expertise to resolve engineering problems and tasks as assigned.

Job Duties and Responsibilities

• Develop Design and Engineering Deliverables and supporting narratives for Bio-Pharma Process and Clean/Black Utility Systems.
• Develop Design deliverables for Concept, Basic and Detailed Design – URS, PFD/PIDs, Process Calculations, FA/FAC/PSV Sizing, Line List, Equipment List, and Equipment Specifications. Data Sheets, Instrument Data Sheets, Material Requisitions, TQ/TBA, etc.
• Assists with the preparation of engineering studies and schematic design for new systems and analyze operation of existing systems.
• Generates Specifications and Data Sheets for Process/Mechanical equipment and provide input to instrument data sheets as well as supporting narratives.
• Adheres to Process/Mechanical and manufacturing design scopes of work for each project and alerts appropriate staff about changes or requests for additional services.
• Prepare Equipment Requisitions/Packages for bid.
• Carryout techno-Commercial Bid Analysis
• Review vendor submittals and documents
• Sees that satisfactory relationships are maintained with clients, consultants and other vested interests.
• Provides site support on projects designed or constructed by IPS.

Qualifications & Requirements:

• Minimum of 15 years of process engineering/design experience, preferably in the Pharmaceutical, Biotech or Bio-Pharma industry.
• Should be independently able to develop Design deliverables for Concept, Basic and Detailed Design – URS, PFD/PIDs, Process Calculations, FA/FAC/PSV Sizing, Line List, Equipment List, and Equipment Specifications. Data Sheets, Instrument Data Sheets, Material Requisitions, TQ/TBA, etc.
• Bachelor’s Degree in Chemical Engineering.
• Proven experience generating PFDs, P&IDs, process equipment and instrument data sheets as well as supporting narratives.
• General knowledge of system design and applicable codes in process engineering.
• Has a demonstrated strong time management skills and the ability to manage projects, problem solve and communicate effectively with co-workers.
• Pharmaceutical, Biotech or Nutraceutical industry experience is strongly preferred.
• AutoCAD experience.

Company Overview:

About Us

IPS-Integrated Project Services is a global leader in developing innovative and cost effective solutions for the engineering, construction, commissioning and qualification of complex pharmaceutical and biotech research and manufacturing facilities. With technical expertise spanning R&D to pilot-scale to large-scale production, our team specializes in the technology, trends and regulatory environment to successfully deliver capital projects and improve operations. For over twenty years, we have applied unique LEAN methodologies throughout the project life cycle, continually finding ways to do things better and more efficiently, delivering higher quality and controlling costs. Headquartered in Blue Bell, PA, IPS is a multi-national company with over 900 professionals worldwide and offices in California, Indiana, Kansas, Massachusetts, New Jersey, North Carolina, Pennsylvania, Brazil, Canada, China, Singapore, Switzerland, UK and four locations in India. Visit our website at www.ipsdb.com.

Specialties

Architectural Design, Engineering, Construction, Commissioning, Qualification, LEAN Project Delivery, Strategic Master Planning, Energy Conservation Management, Project Controls, Program/Project Management, Operations/Logistics Strategy and Planning, EPCMV and Staffing Services.

IPS is an equal opportunity, affirmative action employer of protected veterans (M/F/D/V).

Attention Search Firms / Third Party Recruiters: IPS is not seeking assistance or accepting unsolicited resumes from search firms for employment opportunities with IPS. Regardless of past practice, all resumes submitted by search firms to any employee at IPS via-email, the Internet or directly to hiring managers at IPS in any form without a valid written search agreement in place for a specific position will be deemed the sole property of IPS, and no fee will be paid in the event a candidate is hired by IPS as a result of the referral or through other means.

Glam Salon is a subsidiary company of our parent company which was established since 2002. We are a professional beauty salon that caters to individuals from all walks of life, from children to elderly.

We strive to help our clients reach their desired needs and giving them the confidence as they leave our shop with satisfaction.

Job Key Responsibilities：

· Managing the day to day Operations of the designated outlet assigned.

· Lead / Manage a team of Consultants and Therapists.

· Motivate and coach staff for better performance

· Maintain and update Customer database.

· Drive Sales into the outlet through Marketing Support.

· Promote treatments and packages to Customers.

· Maintain the outlet overall presentation and responsible for the outlet Sales and Revenue

· Lead the Outlet Team in achieving Outlet Sales Target and productivity

· Achieve Personal Sales Target

· Evaluate progress against Sales Target, identify and implement the solutions

· Responsible for daily outlet operations such as handling of customer complaints, motivate staff morale, provide guidance & coaching to staff, etc

· Train, mentor and coach outlet staff to develop and maximize their performance

Job Objectives:

• Lead and work with all outlets to ensure that all parts of the business run efficiently and effectively
• Execute different business strategies to support company growth
• Oversee employee performance and development
• Evaluate business performance, productivity and competitiveness
• Manage costs, budgets and revenue efficiently

Requirements:

· Personal monthly sales achievement

· Possess Results Driven Attitude

· Diploma in Business Administration / Hospitality and Tourism or equivalent certification.

· At least 10 years above relevant working experience, prefer managerial staff specialize in Retail Sales or Service Industry experience.

· Results and service oriented.

· Motivated, Sales driven and dynamic individuals.

· Strong leadership management and interpersonal skills.

· Good communication skills and Positive attitude.

· Willing to work retail hours.

· Full time position.

Job Title: Sales Manager

Industry: Maritime - Harbourcraft

Discipline: Sales & Marketing

Annual Package: SGD 78,000 – 120,000 /-

Company Overview

SG Group of Companies is a dynamic and rapidly growing vessel owner and operator, proudly serving Singapore’s vibrant harbourcraft sector. As a forward-thinking organization, we are dedicated to delivering excellence in marine operations and providing outstanding service to our clients. With a strong focus on expansion and innovation, we are looking for a motivated and experienced Business Development Manager to join our team. This pivotal role will contribute to the smooth management of our operations and vessel crew as we continue to scale our fleet and services. If you are passionate about sales and maritime industry, we invite you to be part of our journey.

As a forward-thinking organization, we are looking for a highly motivated and results-drivenBusiness Development Manager to join our team and drive revenue growth. If you thrive in a fast-paced sales environment and have a passion for the maritime industry, we invite you to join us on this exciting journey.

Job Description

The Business Development Manager

The Business Development Manager will play a pivotal role in identifying new business opportunities, cultivating strategic partnerships, and maintaining strong client relationships within the maritime industry. This role focuses on aggressively pursuing sales targets, expanding market presence, and establishing SG Group as a leader in high value harbour craft operations. Reporting directly to Commercial Director, the Business Development Manager will be a key driver in achieving our ambitious growth objectives.

Key Responsibilities

1. Business Development

· Identify and assess new business opportunities within the maritime sector.

· Develop and implement strategies to enter emerging markets and secure critical contracts.

· Conduct market research and analyze competitors to uncover industry trends and opportunities.

· Aggressively pursue and close new business opportunities with ship agencies, chandlers, and other key stakeholders in the maritime sector.

· Develop and execute strategies to enter emerging markets, secure critical contracts and expand market presence in high-value OPL operations.

· Proactively manage the sales pipeline to achieve monthly.

· Conduct in-depth market research and analysis to uncover trends and identify new opportunities.

2. Client Relationship Management

· Leverage an extensive network to secure long-term contracts and partnerships with key clients.

· Build and nurture strong relationships with existing and potential clients, stakeholders, and partners.

· Serve as the primary point of contact for key accounts, ensuring excellent client satisfaction.

· Negotiate and finalize contracts to achieve or exceed sales targets.

3. Strategic Planning

· Collaborate with senior management to align business development initiatives with company goals.

· Provide actionable insights into sales forecasts, pipeline health, and deal progress to ensure informed decision-making.

· Provide insights to support product development and refine service offerings based on market demand.

· Prepare and manage sales forecasts, budgets, and performance metrics.

4. Industry Expertise

· Stay informed about maritime industry regulations, technological advancements, and global market trends.

· Represent the company at industry events, conferences, and trade shows to promote the brand and network.

· Monitor industry developments to maintain a competitive edge.

5. Team Collaboration

· Collaborate with marketing, operations, and technical teams to deliver comprehensive client solutions.

· Guide and mentor junior team members in business development best practices.

Qualifications and Skills

· Education

o Bachelor’s degree in business administration, Maritime Studies, Engineering, or a related field.

o An MBA or equivalent is advantageous.

· Experience

o 4-5 years of success in business development or sales within the maritime or shipping industry. of proven success in business development or sales within the maritime, shipping, or harbour craft industry.

o Demonstrated ability to secure and grow high-value accounts.

o Background in ship agency, ancillary services, launch operations, or harbour craft operations is highly preferred.

o Experience managing large accounts and coordinating with cross-functional teams.

· Skills

o Exceptional pipeline management and deal-closing skills.

o Strong negotiation, communication, and relationship-building abilities.

o Comprehensive knowledge of the maritime industry, including shipping, logistics, and offshore services.

o Analytical skills to identify trends and make data-driven decisions.

o Proficiency in CRM tools and the MS Office Suite.

· Key Competencies

o Strategic and analytical thinking.

o Results-oriented with a proactive mindset.

o Strong networking and interpersonal skills.

o Ability to thrive under pressure and meet deadlines.

Interested candidates can send their updated resume to [email protected]