Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Project Manager will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. To perform any other duties & Responsibilities assigned by superiors from time to time.

5. Ability to demonstrate and implement cost -saving measures.

6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

Key Responsibilities:

1. Office Management: Oversee daily office operations, ensuring a smooth workflow.
2. Team Supervision: Manage and lead administrative staff, providing guidance and support.
3. Budgeting & Finance: Oversee the office budget, track expenses, and handle cost management.
4. Document Management: Ensure efficient filing systems, both physical and digital, and manage company records.
5. Communication Coordination: Manage internal and external communications, such as emails, meetings, and correspondences.
6. Scheduling & Calendar Management: Organize and coordinate meetings, appointments, and events for executives or departments.
7. Policy Implementation: Enforce organizational policies and procedures.
8. Inventory Management: Track office supplies, order replacements, and maintain inventory.
9. Vendor Management: Coordinate with external vendors and suppliers for services and office supplies.
10. HR Support: Assist with HR-related duties, such as employee onboarding, maintaining attendance records, and organizing training.
11. Costing Management: Oversee daily business operation and costing estimation and update to the Management.
12. Project Monitoring: Estimate Manhour colculations and costing preparations for Projects.

Job Level & compensation offered may vary depending on candidates’ experiences and competencies.

Analyzes biological or chemical samples and/or develops/validates methodologies for various compounds and components in compliance with appropriate standard operating procedures (SOPs) and regulatory agency guidelines.

Responsibilities:

• Documents work and maintains study documentation and laboratory records.
• Independently sets up, maintains, operates and performs routine and non-routine maintenance on general equipment, including problem identification and resolution.
• Informs project management and/or line management of any problems and/or deviations that may affect the integrity of the data and recommends corrective action.
• Promotes a cohesive team environment.
• Suggests and performs modifications to test methods or procedures where precedence exists.
• Provides input and participates in project meetings, plans, monitors and guides project work.
• Serves as lead chemist on projects, overseeing a small group of technical staff, with minimal supervision.
• May interact in external client communications.
• Sets up and performs method development and validation of various analytes in a variety of matrices with limited supervision.
• Organizes, conducts and evaluates analytical results and testing.
• Performs QC review of data.
• Maintains a clean and safe laboratory work environment.
• Performs other related duties as assigned.
• Trains and assists less experienced staff.
• Participates in process improvement initiatives.
• Writes, revises and reviews methods, SOPs and portions of reports and protocols.
• Participates in client visits as needed, assists in communicating technical information.
• Effectively plans and utilizes personnel and resources for timely completion of assigned projects.
• Assists in evaluation of data for incorporation into written reports.

Requirements :

• Master degree in chemistry or related field with min. 5 years of previous laboratory experience. Relevant experience may be substituted for education.
• Minimum 3 years of experience with method development for quantitative analysis of clinical samples using LC-MS
• Excellent hands-on skills with sample extraction using PPT, LLE, SPE etc
• Experience with use and trouble shooting of analytical equipment is desired.
• Good team work
• Basic knowledge of computers and software programs.
• Familiar with the use of standard laboratory equipment.
• Effective communication (verbal and written), presentation and interpersonal skills.
• Ability to perform advanced computer skills (e.g., Word, Excel).

Job Responsibilities:

1. Team up with chemists to lead a team of lab analysts and technician in executing daily laboratory operations, ensuring compliance with accreditation standards and quality system implementation.
2. Develop and validate analytical methods for the testing of chemical compounds, ensuring accuracy, precision, and reliability. Identify and drive initiatives to enhance laboratory operational efficiency and productivity.
3. Manage laboratory inventory and equipment, including consumables/spare-parts inventory, equipment calibration, troubleshooting, and maintenance planning, to meet quality and operational requirements consistently, ensuring analytical tools are in proper working condition for accurate testing and analysis.
4. Provide support in new product development processes (R&D), analytical metrology, and quality assurance for all products, offering product expertise, providing technical support for new product developments, and addressing technical emergencies.
5. Collaborate with other departments on continuous improvement projects to achieve business objectives.
6. Perform Quality Control (QC) responsibilities, including conducting quality tests, inspections, and analyses to ensure product integrity and compliance with standards and specifications.
7. Investigate deviations, out-of-specification results, and quality-related issues, and implement corrective and preventive actions (CAPAs) as necessary.
8. As quality master to understand product quality, to ensure product to fulfill customer’s requirement.

Job Requirements:

1. Master's Degree in Chemistry with 2 – 3 years relevant working experience in QC lab or a Bachelor’s Degree in Chemistry with 5 – 6 years relevant working experience.
2. Working experience or significant exposure to specialty chemicals or semiconductor wafer fab supplier environments is considered an added advantage.
3. Strong hands-on instrumentation experience such as ICP/MS, GC/MS, UV-Vis, GC/FID/TCD, IC, HPLC, ICP/OES, NIR, and other measurement tools.
4. Excellent written and spoken communication skills in bilingual languages (English and Mandarin) to liaise with English and Mandarin-speaking associates/clients.
5. Hardworking, able to multi-task, and willing to work long hours when necessary
6. Team player with excellent interpersonal skills and a strong sense of ownership with responsibilities to achieve project and business objective
7. Ability to work under pressure, prioritize workload, be systematic, and make sound decisions in a fast-paced environment.
8. Willingness to travel when required.

Job Responsibilities:

1. Responsible in the daily operations of HR and Admin functions.
2. Responsible in managing job applications, scheduling for interviews, leave management etc.
3. To support in development and implementation of HR policies, plans, processes, programs, and projects.
4. Work with the cross department leaders and provide support and coaching to deliver actions that will drive people and organization performance to support delivery of organizational growth and business objectives.
5. Work closely with local government agencies to attract local talents.
6. Responsible for work passes application/ renewal/ cancellation/ appeals.
7. Support training and other governmental grants as well as coordinate all training courses and programs for staff.
8. Maintain and update Company's rules & regulations and 5S best practices.
9. To drive and maintaining Company culture, team spirit.
10. To drive employee’s engagement activities of Company event and teambuilding activities.
11. Taking charge of stationery and pantry supplies.
12. Upkeep and improve office working environment.
13. Manage corporate gifting.
14. Other ad-hoc duties as assigned.

Requirements:

1. Degree in Human Resource Management, Business Administration or equivalent.
2. Minimum 5 years of relevant working experience.
3. Knowledge of Singapore Employment Act would be advantageous.
4. Proficiency in MS Office (Word, Excel, Power Point).
5. Hands-on, organized, self-driven and detailed oriented.
6. Able to multitask in a fast-paced working environment.
7. Able to work long hours and work under tight timelines.
8. Posses entrepreneur spirit.
9. Fluent written and spoken communication skills and presentation skills.

Job Description

Responsibilities:

Scope covers procurement, contracts, cost control, cashflow, project budgeting, project administration, claims, cost analysis etc.

· Tabulate quantities, estimate cost and request for quotation

· Knowledge of construction products and costings

· Updating contract documents, drawings, and correspondences

· Submission of progress claims and site valuations

· Preparation of Variation Order for submission

· Liaise with subcontractors and clients

· Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.

· Ensure timely completion of an assigned projects.

Requirements:

· Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent

· Minimum 2 years of QS experience

· Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)

· Independent, resourceful, pro-active and responsible

· Work under tight timeline

· Must be team player

The incumbent is responsible to:

• Perform audiological and vestibular testing efficiently and effectively. This include PTA, Tympanometry, Acoustic reflex testing, VNG, VEMPs, VHIT, ABR, Oto-acoustic Emissions etc
• Assist in seeing patients for Hearing Aid evaluation and fitting in a busy specialist outpatient clinic setting
• Comply in procedures in areas of electronic medical records system, PDPA and infection control

Job Requirements:

• Masters / Bachelor degree in Audiology
• Experience in Audiology will be an advantage
• Competence in CI management is an advantage.
• Team-player, proactive, dynamic personality and patient centered
• Ability to work as a team in a multi-disciplinary environment with other healthcare professionals
• Keep up to date with the latest in hearing technology, be confident in managing patient's hearing rehabilitation while remaining patient-centered at all times
• Duration: 6 months contract

Position Overview:

We are seeking a skilled and experienced Carpenter with a minimum of 10 years of hands-on expertise, specialising in home / commercial furnishing. The ideal candidate should be equipped with a keen eye for detail, precise craftsmanship, and a strong commitment to quality. This role involves constructing, and installing furniture and interior elements, ensuring they meet both functional and aesthetic standards.

Objectives of this role

1. Advance construction projects by building and installing key functional elements
2. Keep work areas and equipment clean and secure
3. Maintain good relationships with internal stakeholders
4. Ensure compliance with safety protocols on-site and in the workshop
5. Demonstrate excellence of craft to meet with client expectations

Responsibilities

1. Construct and install interior components such as cabinetry, panelling and decorative elements for home / commercial use
2. Use power tools and other equipment for construction and installation
3. Troubleshoot construction issues with project team
4. Ensure all relevant workplace safety regulations are followed
5. Attend site scouts and meetings prior to beginning construction (if any)

Skills and qualifications

1. Ability to work independently and as part of a team
2. Professional interpersonal skills
3. Accurate and detail-oriented approach
4. Ability to work well under pressure and within time constraints
5. Capacity to multitask without sacrificing quality or safety
6. Willingness to work outdoors in a range of weather conditions

Eligibility Criteria

1. At least 10 years of relevant experience in carpentry and/or furniture installation
2. Experience working with power and hand tools (e.g., saws, drills, and hammers)
3. Strong verbal communication skills (English and/or Mandarin)
4. Ability to follow plans, blueprints, and sketches
5. Good math and spatial reasoning skills
6. Knowledge of carpentry best practices and techniques
7. This role is based in Singapore and is open to candidates that may require a work permit

Compensation and Benefits

1. Salary will be based on experience and expertise

_________________________________________________________________________________________________________________

职位概述:

我们正在寻找一位经验丰富的木匠，要求至少拥有10年的实际专业工作经验，

具定制及室内构件制作和安装领域, 能够胜任各种木工相关的任务。他将负责执行和监督公司各类木工项目的实施，确保产品和工程质量符合公司和客户的高标准。

职位职责:

1. 根据设计图纸和客户需求完成木制品的制作、装配和安装工作。
2. 选择合适的木材，确保材料的质量和使用效率。
3. 操作传统和现代木工工具与设备，确保工艺精确无误。
4. 维护和修理公司现有的木制品和设备。
5. 协调和指导木工团队成员的日常工作，提供专业培训和技术支持（如适用）。
6. 确保所有木工项目按时交付，并符合公司质量和安全标准。

职位要求:

1. 至少10年的实际木工工作经验，熟悉家具定制、装饰木工或其他相关领域。
2. 精通木材加工、装配、打磨、油漆处理等核心技能。
3. 能够阅读和理解复杂的木工设计图纸。
4. 熟悉传统木工技艺，并能操作现代化设备。
5. 注重细节，具备出色的质量意识和问题解决能力。
6. 良好的时间管理能力，能够高效地处理多项任务。
7. 中专或以上学历，木工、设计或相关专业优先。
8. 持有木工职业资格证书者优先考虑。
9. 具有一定的领导和团队协作能力
10. 对木工行业充满热情，且具备较强的客户良好的 英语/普通话沟通能力.
11. 需居住于新加坡和拥有本地签证的候选人。

薪酬与福利:

1. 薪资将根据经验和技能水平决定

This position requires the dietitian to provide medical nutrition therapy to patients from various clinical disciplines at both inpatient and outpatient settings. The dietitian will also need to participate in community and public education/ activities to promote healthy eating and nutritional well-being. As part of continuous improvement, the dietitian is expected to contribute in quality improvement and/ or research activities.

As a senior dietitian, you will guide and mentor junior Dietitian, train and teach students on clinical placements, and participate in teaching of healthcare professionals.

Job Requirements:

• Bachelor Degree in Nutrition and Dietetics/ Master of Science in Nutrition and Dietetics/ Postgraduate Diploma in Dietetics
• Candidates with prior relevant experience preferred
• For the Senior position, a minimum of 4 years’ relevant experience in clinical setting with at least 1 year in a supervisory capacity preferred

The incumbent is responsible to :

• Ensures medication management in own area of work is efficient, zero-wastage and inaccordance with best professional practices
• Reviews medication orders (medication chart or prescription) for appropriateness and intervenes with prescriber or follows up where necessary
• Ensures medications received by patients are packed correctly and dispensed within target turnaround time
• Ensures that all medication related costs and revenue in own course of work are accounted for and accurately recovered where applicable
• Assigns, overseas and reviews the work of subordinates in the same area of work. Ensures that all prescription, sales, supply, storage and distribution of medications, as well as their documentation, comply with legal requirements and relevant regulations established by the relevant authorities
• Precepts and trains pre-registration pharmacists, pharmacy technicians and pharmacy/pharmaceutical students according to training plan and guidelines
• Attends and provides lectures and other forms of continuing education to pharmacy staff and other hospital employees
• Provides feedback to inform department's continuing education agenda
• Leads research or quality improvement projects in the department

Job Requirements :

• Degree in Pharmacy accredited by the Singapore Pharmacy Council
• Registered Pharmacist with the Singapore Pharmacy Council
• Minimum 2 years' experience in hospital pharmacy-related work or minimum 1-2 years' experience in hospital pharmacy-related work with a relevant postgraduate degree

You will assess, diagnose, and implement treatments for a range of problems related to the foot and lower limbs in the primary care setting. Using your specialist skills, you will treat a broad spectrum of patients ranging from low-risk foot conditions such as corns, calluses, and pathological nail conditions, musculoskeletal cases to high-risk diabetic foot ulcers. You will also be involved in the prescription of custom-made foot orthoses. In addition, you will educate patients and family members or caregivers on preventive foot care and the continued treatment of disorders, and conduct talks relating to foot care. You will also contribute towards continuous quality improvement in the department and provide guidance to trainees and students.

Requirements

• Degree in Podiatry from a recognized university.
• Registration with the relevant governing body of this profession, if applicable.
• Ability to work well independently in a challenging environment alongside a multi-disciplinary team.
• Ability to demonstrate and articulate sound clinical knowledge and reasoning, critical thinking, judgement, and decision-making in the provision of care.
• A patient-focused individual with a genuine desire to make a difference in community healthcare
• Ability to thrive in a fast-paced environment and travel to different polyclinics in the West.
• An individual with a passion for a healthcare career and who is inspired to move ahead despite challenges.

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Job Descriptions

• Preparation of RFQ's.
• Source for quotations for materials and service.
• Analysis and evaluation of price comparison and costing summary.
• Cost planning, estimation and measurement of quantities.
• Responsible for claims, variation orders, budget & cost control.
• Prepare settlement for Final Accounts.
• Manage contracts administration.
• Handle issues including extension of time, terms and conditions, loss and expenses claims etc.

Job Requirements

• Bachelor's Degree in QS or Engineering / Civil Engineering
• At least 6 - 8 years of QS experience in Construction of Civil or Building projects (For Senior Role)
• At least 3 - 5 years of QS experience in Construction of Civil or Building projects (For Quantity Surveyor Role)
• Good knowledge of Quantity Surveying and Contracts Administration.
• Good time management skills with keen attention to detail and ability to manage particular tasks independently.
• Knowledge of Primavera or Primavera 6 software will be an advantage.
• Salary Range: $4500 - $6500 (Salary Commensurates Experience)

Job Description:

We are seeking an experienced IBM BPM/BAW Senior Developer with over 8+ years of expertise in developing, customizing, and enhancing user interfaces within the IBM Business Process Manager (BPM) platform. The ideal candidate will have a strong understanding of BPM Application, UI Development and Customization, and hands-on experience in creating responsive, dynamic, and user-friendly interfaces.

Key Responsibilities:

• Design and Development: Design, develop, and implement responsive UI components for IBM BPM solutions, ensuring alignment with business requirements and user experience standards.
• Customization: Customize and enhance IBM BPM Coaches and UI toolkits to meet specific project requirements.
• Integration: Work on integrating BPM UI components with backend services, including REST APIs and web services.
• Migration: Migrate existing custom application to IBM Application with similar existing functionalities.
• User Experience: Collaborate with stakeholders and business analysts to understand user needs and translate them into functional UI designs.
• Troubleshooting: Analyse and resolve BPM application related issues within BPM processes and ensure seamless performance across different platforms.
• Best Practices: Implement best practices in UI development, ensuring reusability, scalability, and high performance.
• Automated Testing and Deployment: Conduct thorough testing of UI components using automated testing and deployment to ensure robustness, responsiveness, and compatibility with different browsers.
• Documentation: Prepare and maintain technical documentation related to UI development and enhancements.
• Collaboration: Work closely with BPM developers, architects, and other team members to ensure smooth integration of UI components within the overall BPM solutions.

Key Skills and Qualifications:

• IBM BPM Expertise: 8+ years of hands-on experience with IBM BPM, specifically in developing and customizing UI components.
• UI/UX Design: Proficiency in designing user-friendly, responsive interfaces using IBM BPM Coaches, HTML5, CSS3, and JavaScript.
• Frameworks: Experience with front-end frameworks and libraries like AngularJS, React, or Vue.js is a plus.
• BPM Tools: Strong understanding of IBM BPM Process Designer, Coaches, and UI Toolkit.
• Integration Knowledge: Familiarity with integrating BPM with RESTful services, SOAP, and other APIs.
• Problem-Solving: Excellent analytical and problem-solving skills, with the ability to troubleshoot UI-related issues.
• Communication Skills: Strong verbal and written communication skills, with the ability to interact effectively with both technical and non-technical stakeholders.
• Collaboration: Ability to work in a team-oriented environment and collaborate with cross-functional teams.

Educational Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• IBM BPM certifications

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

• Supervise the installation, testing, and commissioning of electrical and instrumentation systems on-site.
• Ensure all E&I activities comply with relevant safety, quality, and environmental regulations.
• Manage and mentor a team of E&I technicians, contractors, and subcontractors to ensure high standards of performance.
• Oversee day-to-day site operations, ensuring work is carried out in accordance with the project schedule and budget.
• Liaise with project engineers, clients, and contractors to resolve technical and logistical issues.
• Conduct site inspections to monitor progress, quality, and safety practices.
• Prepare and maintain accurate daily reports on site activities and progress.
• Ensure proper documentation of all E&I installations and testing procedures.
• Monitor the procurement and availability of materials and equipment required for E&I work.
• Assist in the preparation of risk assessments, method statements, and work permits.
• Coordinate with the project management team to ensure successful project execution and completion.

KEY DUTIES AND RESPONSIBILITES:

• Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.
• Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
• Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
• Ensure readiness of QC Laboratory in internal / external audits.
• Maintain data integrity in Quality Control activities and ensure appropriate traceability.
• Initiate change control documents.
• Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
• Participate in New Product Introduction activities.
• 9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.
• Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
• Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
• Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
• Escalate the quality events, trends as appropriate to QC Head.
• Remain abreast of current regulatory, pharmacopeia and cGMP trends.
• Serve as subject matter expert on laboratory instrumentation and compliance issues.
• Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
• Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
• Maintains a safe laboratory environment by implementing recommendations made by EHS.
• Initiate CAPEX for equipment purchases.
• Support in budget preparation for QC Laboratory.
• Any other activities as and when assigned by the Superior.

JOB REQUIREMENTS:

• EDUCATION: Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).
• EXPERIENCE: Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

• Possess working knowledge of GMP in the pharmaceutical industry.
• Excellent interpersonal and analytical skills, good verbal, and written communication skills.
• Working knowledge of qualification, calibration, and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• Working knowledge of method development, validation, verification of analytical method.
• Familiarity of 21 CFR Part 11 requirements.

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected]. with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

If the chemistry is right, we can make a difference at LANXESS: speed up sports, make beverages last longer, add more color to leisure time and much more. As a leading specialty chemicals group, we develop and produce chemical intermediates, additives, specialty chemicals and high-tech plastics. With more than 13,000 employees. Be part of it!

Job Highlights:

Interface Creation & Monitoring: Develop and oversee interfaces in SAP PI/PO and SAP Integration Suite, ensuring seamless data flow across systems.

Ticket Handling & Issue Resolution: Manage 1st and 2nd level support tickets for SAP PI/PO and Integration Suite, diagnose issues, and perform corrective actions in collaboration with service providers.

Recurring Issue Analysis: Conduct root cause analysis for recurring issues, document findings, and recommend corrective actions to prevent future occurrences.

Team Collaboration: Collaborate with internal teams and external partners to address integration challenges and ensure timely resolution.

Adherence to Processes: Follow established procedures, contribute to documentation, and support knowledge sharing to promote best practices.

System Stability & Checks: Perform post-restart system checks to ensure application stability and troubleshoot issues, maintaining uptime after maintenance activities.

Workplace and End-User Service & Support (Global/Regional): Provide expert knowledge and technical assistance to IT-PO teams and services across global/regional operations.

IT Project Support (Regional/Local): Support IT projects within the Asia Pacific region, contributing to successful implementation and operations.

Job Requirements:

Education: Bachelor’s degree in Information Technology, Computer Science, Engineering, or a related field. SAP certification in relevant modules (e.g., SAP PI/PO, SAP Integration Suite) is a plus.

Experience: Minimum 3-5 years of hands-on experience working with SAP PI/PO, SAP Integration Suite, or other SAP modules. Proven experience in managing and troubleshooting integration scenarios across SAP and non-SAP systems.Familiarity with root cause analysis and problem management practices to resolve recurring system issues.

Communication Skills: Excellent verbal and written communication skills, with the ability to influence and collaborate effectively with internal teams, customers, and stakeholders.

What We Offer You

• Compensation: We offer competitive compensation packages, inclusive of a global bonus program and an individual performance bonus program.
• Comprehensive Benefits: We provide a variety of benefits to support your financial security, health and wellbeing including retirement plans, health programs, life insurance and medical care.
• Work-Life & Flexibility: We support you in maintaining a balance between working hours and personal life. With our global “Xwork” program, we offer flexible working arrangements in all countries in which we operate.
• Training & Development: We are committed to your professional and personal development and encourage you in the ongoing pursuit of education, training and knowledge through both formal and informal learning .

Diversity: For us, talent matters, we welcome everyone who commits to our values. We strongly believe that including diverse perspectives makes us more innovative and enhances our competitiveness. Therefore, we embrace the uniqueness of every single individual and are truly committed to supporting our people in developing their individual potential.

Job Description:

We are seeking an experienced IBM BPM/BAW Senior Developer with over 8+ years of expertise in developing, customizing, and enhancing user interfaces within the IBM Business Process Manager (BPM) platform. The ideal candidate will have a strong understanding of BPM Application, UI Development and Customization, and hands-on experience in creating responsive, dynamic, and user-friendly interfaces.

Key Responsibilities:

• Design and Development: Design, develop, and implement responsive UI components for IBM BPM solutions, ensuring alignment with business requirements and user experience standards.
• Customization: Customize and enhance IBM BPM Coaches and UI toolkits to meet specific project requirements.
• Integration: Work on integrating BPM UI components with backend services, including REST APIs and web services.
• Migration: Migrate existing custom application to IBM Application with similar existing functionalities.
• User Experience: Collaborate with stakeholders and business analysts to understand user needs and translate them into functional UI designs.
• Troubleshooting: Analyse and resolve BPM application related issues within BPM processes and ensure seamless performance across different platforms.
• Best Practices: Implement best practices in UI development, ensuring reusability, scalability, and high performance.
• Automated Testing and Deployment: Conduct thorough testing of UI components using automated testing and deployment to ensure robustness, responsiveness, and compatibility with different browsers.
• Documentation: Prepare and maintain technical documentation related to UI development and enhancements.
• Collaboration: Work closely with BPM developers, architects, and other team members to ensure smooth integration of UI components within the overall BPM solutions.

Key Skills and Qualifications:

• IBM BPM Expertise: 8+ years of hands-on experience with IBM BPM, specifically in developing and customizing UI components.
• UI/UX Design: Proficiency in designing user-friendly, responsive interfaces using IBM BPM Coaches, HTML5, CSS3, and JavaScript.
• Frameworks: Experience with front-end frameworks and libraries like AngularJS, React, or Vue.js is a plus.
• BPM Tools: Strong understanding of IBM BPM Process Designer, Coaches, and UI Toolkit.
• Integration Knowledge: Familiarity with integrating BPM with RESTful services, SOAP, and other APIs.
• Problem-Solving: Excellent analytical and problem-solving skills, with the ability to troubleshoot UI-related issues.
• Communication Skills: Strong verbal and written communication skills, with the ability to interact effectively with both technical and non-technical stakeholders.
• Collaboration: Ability to work in a team-oriented environment and collaborate with cross-functional teams.

Educational Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• IBM BPM certifications

Work Location: Singapore (Global HQ)

Reporting to the Senior Manager, Global FP&A, the incumbent will be the Finance Business Partner to Sales and marketing / Manufacturing / SCM / Procurement / HR leadership globally in formulating short to mid business direction and plan.

The Senior Analyst would work on an assigned Region most of the time as well as be involved in selected reporting requirement for global level.

Key responsibilities:

• Facilitate the submission of forward-looking monthly forecasting, annual budget and long-term projections, followed with insightful analysis on trend & deviations.
• Conduct commercial analysis at in-depth level for actual data in financial statements, sales, production/CAPEX data, procurement data, inventory, Standard Costing Production variances and other relevant operational information.
• Highlights exceptions & provide feedback to management for improvement.
• Participate in global initiatives and projects on process improvement, system implementation, e.g. Jedox.
• Develop and maintain tools and reporting templates to improve the efficiency, timeliness & accuracy in data collation, analysis and performance tracking.
• Hands-on work with Business Intelligent tools, SAP/BW systems.
• Support on other ad-hoc assignments.

Responsibilities

• Own and drive analysis of past trends & forward-looking of financial / business / operational information.
• Develop, implement and continuously improve on the methodology and process of compiling business data & information.
• Support analysis relating to KPI achievements e.g. Revenue & profitability, by drilling down to Product Range, Sales Area & Customer levels.
• Perform analysis relating to product costing, manufacturing site costs, SCM costs, Inventory and CAPEX related processes for the Region assigned.
• Track & analyse KPI achievements at regional level, by drilling down to Product Range, Sales Area & Customer details.
• Actively participate in global projects & initiatives related to P&L.
• Support any other task(s) assigned by Senior Manager, Global FP&A.

Requirements:

• Degree in in finance / accounting with minimum 5 years’ experience in FP&A and Standard Costing.
• Hands-on experience in production-oriented & manufacturing environment preferred.
• Knowledge of intermediate level of double-entries, basic understanding of intercompany transactions would be a plus.
• Ability in designing & drawing graphs and interpreting them.
• Adept at working with large data sets and able to draw insights from it.
• Good understanding of ERP & BI Tools (SAP and SAP Business Warehouse will be an advantage)
• Excellent Microsoft Office skills (especially Excel)
• Good sense of urgency in meeting reporting deadlines
• Strong analytical skills, meticulous.
• Excellent communication skills & fluency in business English. Needs to be able to work with multicultural teams and communicate with various regional/global team members. Ability to speak and write Chinese will be preferrd as this role requires liaision with our Chinese counterparts.

Responsibilities:

• Ensure the company functions in a legal and ethical manner while meeitng its business goals
• Responsible for carrying out internal audit and risk management programs, execution of company policies, and advising management on possible compliance risks
• Plan and execute internal audit activities such as operational and compliance audits
• Review integrity of operational data and compliance with established policies and procedures and / or applicable laws and regulations
• Identify internal control weaknesses, operational issues and business inefficiencies
• Recommend appropriate solutions that can address root causes and add-value to the Company based on best practices; follow-up on corrective actions
• Prepare clear and concise reports in English for all level of key stakeholders including senior management
• Prepare audit work papers to support audit test work and conclusions
• Establish strong working relationships with key stakeholders
• Conduct special audits or ad-hoc projects as and when required

Requirements:

• Bachelor’s degree in Accountancy, Finance, Business or equivalent (e.g. ACCA or CA)
• Other professional certification (CIA/CISA or CFE) would be advantageous
• Minimum 3 years experience in internal audit, risk, compliance and governance role
• Exposure to regulatory requirements (financial reporting, tax, human resources, EHS) would be advantageous
• Experience with SAP would be advantageous
• A strong team player with an analytical/inquiring mind
• Independent, self-driven and pro-active attitude
• Willing to travel overseas to conduct audits or related activities (if required)
• Experience in internal audit, risk, compliance and governance role
• Experience with SAP would be advantageous
• Exposure to regulatory requirements (financial reporting, tax, human resources, EHS) would be advantageous

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

Only shortlisted candidates will be notified

Sunningdale Tech is an equal opportunity employer – we believe that a diverse and inclusive workforce will cultivate a vibrant, productive and innovative workplace where all employees are truly respected and valued.

All qualified applicants shall be considered for employment regardless of age, race, gender, gender identity, religion, marital status, medical condition, mental or physical disability, national origin, political and/or third party affiliation or veteran status. All offers of employment shall be conditioned upon successful completion of background checks, valid work passes and medical screenings, as applicable and/or mandated by law, and subject to the applicable local laws and regulations.

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with General Manager to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 5 years in marine industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components MRO.

Additional Information:

• 5 days’ work week
• Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.
• Variable bonus and better medical benefits.
• Career growth & learning opportunity.