Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

Responsibilities:

• Provide excellent customer service in the retail front office operations.
• Handle incoming enquiries and requests from residential customers.
• Engage in daily operations, actively contributing to problem resolution and providing customer service support.
• Explain invoices, address account-related queries, and manage retail contracts effectively.
• Able to understand and explain well on the company’s price plans and services.
• Communicate clearly and effectively with customers, ensuring a positive interaction.
• Demonstrating empathy and patience in handling customer concerns.
• Recording customer interactions and transactions accurately in the company’s system.
• Adhering to company policies, procedures, ethical standards, code of conduct, and compliance with relevant regulations and laws.
• Safeguard customer confidentiality and privacy throughout all interactions.
• Participate in system / process enhancement projects to improve overall efficiency.

Requirements:

• Preferably holding a degree or diploma.
• Some prior experience in customer service is desirable.
• Seek individuals who align with values emphasizing service excellence.
• Possess a positive and proactive working attitude.
• Demonstrate self-motivation, independence, and a proactive approach to tasks.
• Exhibits a willingness to learn and is prepared to grow with the organization.
• Demonstrates strong teamwork, with good interpersonal and communication skills.
• Exhibits an achievement-oriented and results-driven approach.
• Proficient in communication using multiple languages, including English and Mandarin. Proficiency in Malay is considered an added advantage.

Others:

• 5-day work week.
• Working Hours: Mondays to Fridays 9am to 6pm.

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates will be notified)

By submitting your personal data and/or resume to PacificLight (“us”), you shall be deemed to have given consent to us collecting, using, and disclosing your personal data for the purpose of assessing your job application. Information collected may also be disclosed to PacificLight Group of Companies (“PacificLight”) which includes PacificLight Power Pte. Ltd and PacificLight Energy Pte. Ltd. for this purpose. Please read our privacy policy here.

Responsibilities:

· You will promote and propose Trane Chiller & Equipment to building consultants and contractors

· Responsible for developing long term customer relationships

· Building close business relationship with customers especially key accounts

· Maximizing account penetration and customer retention

· Identify potential opportunities & develop solutions with existing & new customers

· Update forecast timely into the system

· Negotiates value, addresses resistance, and close the sales. Differentiates & made Trane as preferred supplier

· Any other duties as assigned from time to time

· You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Requirement:

· Degree in Mechanical/ Electrical engineering or its equivalent

· 1-2 years in Engineering sales, experience in HVAC industry will be a plus

· Customer driven with excellent communication & interpersonal skills

· Candidates with the relevant education qualifications but no prior work experience is welcome to apply

Responsibilities:

• To provide engineering support to the Project team from validation phase to project implementation

• To identify type of material and equipment requirement during validation phase.

• To involve in preparation and submission of engineering submittals.

• Programming of devices & creating and programming graphics in accordance with the project requirement.

• To assist in Test and Commissioning of system equipment.

• To assist in preparation and submission of operation and Maintenance Manuals.

• To provide Bill of Quantity for the projects.

• Any other duties as assigned by superior

• Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements:

• Diploma/ Degree in Engineering or Building Control in relevant field

• Min 1-2 years of relevant work experience

• Experience in PLC programming is added advantage

• Experience in handling energy management systems/ HVAC systems/ Chiller Plant systems/ Building Management Systems will be a plus

• Knowledge of IT networking and database programming, Function Block programming, Structured Language Programming or HTML5 programming will be of added advantage

• Knowledge of industrial system protocols like BACnet, Modbus, LONTalk

• Strong customer management and problem solving skills

• Able to work with the team and self-motivated

Job Description: Data Engineer

As a Data Engineer at D-SIMLAB Technologies, you will play a key role in deriving insights from large datasets to optimize semiconductor manufacturing processes. This role focuses on data extraction, analysis, and actionable insights, while collaborating with cross-functional teams to develop and deploy D-SIMLAB’s software products as well as provide professional consultation services to our clients. The ideal candidate is someone who excels in data-driven analysis and is eager to work on high-impact projects in the semiconductor industry.

Key Responsibilities:

• Data Extraction and Analysis:
  Collect, clean, and analyze large datasets from semiconductor manufacturing environments to ensure data consistency, completeness, and correctness.
  Use statistical methods and data mining techniques to identify patterns, trends, and anomalies that impact production performance.
• Performance Evaluation:
  Analyze the gap between planned and actual production outcomes. Identify root causes for performance deviations and recommend data-driven strategies for process improvement. Develop reports and visualizations to present findings to clients and internal stakeholders.
• Data-Driven Insights:
  Provide actionable insights based on data analysis to optimize semiconductor manufacturing processes. Work closely with clients to understand their specific needs and translate data findings into operational and strategic improvements.
• ETL and Data Modeling:
  Build and maintain ETL processes to integrate data from various sources into D-SIMLAB’s data models. Collaborate with simulation modeling teams to ensure accurate and reliable data is fed into models.
• Consultation Services:
  Act as a trusted advisor to clients by offering data-driven recommendations for enhancing their production efficiency. Present analyses and proposals to both technical and non-technical stakeholders, ensuring clarity and actionable takeaways.
• Data Visualization and Reporting:
  Create dashboards and reports using advanced data visualization tools to communicate key insights and trends effectively. Continuously improve reporting mechanisms to provide real-time insights and support ongoing optimization efforts.
• Collaboration with Teams:
  Work with Software Engineers, Data Scientists, and other cross-functional teams to ensure that data insights align with product goals and customer needs. Contribute to product enhancement initiatives, focusing on the improvement of data-related components and analytics.

Candidate Requirements:

• Education:
  Bachelor’s/Master’s degree in Data Science, Industrial Engineering, or a related field.
• Experience:
  Strong analytical skills with a minimum of 2 years of experience in data analysis, preferably in an industrial environment. Semiconductor experience is a plus.
• Technical Skills:
  Proficiency in SQL and Microsoft Excel.
  Experience with data visualization tools (e.g., Power BI, Tableau) is highly desirable.
  Experience with ETL processes and database management.
• Analytical Abilities:
  Strong problem-solving skills and the ability to handle large datasets and deliver actionable insights to improve operational performance.
• Soft Skills:
  Ability to work collaboratively in a multicultural, multidisciplinary team.
  Excellent communication and presentation skills, with the ability to convey complex data insights to non-technical stakeholders.
• Willingness to Travel:
  Willing to travel for international projects and collaborate closely with clients and internal teams.

Please ensure your profile on the portal is updated with your job experience and education as these fields are being used for the purpose of filtering and shortlisting.

The Process Engineer reports to the Tender & Contracts Manager and is responsible for the below:

• Review Tender Documents, sourcing for materials, suppliers and vendors to obtain and review quotes.
• Communicate and negotiate with external vendors on pricing, scope & other contractual terms.
• Assist with tender documentations preparation, cost reports and cost plans, administer and evaluate tender process and submit tender proposal reports
• Administrative duties such as preparing bills of quantities.
• Arrange/attend to tender queries and clarification meetings.
• Follow up with the Project teams on variation order or change order, assess the associated variation costs.
• Support project teams for monthly progress claims and billings.

To be successful, you would possess these qualities and skills

• Bachelor’s degree in Mechanical/Chemical Engineering or equivalent.
• Min. 1-3 years of relevant working experience in Mechanical Services.
• Proficient knowledge in understanding Isometric drawings, Piping & Equipment GA drawings.
• Experience working in Semi-con, Data Centre, Pharma or O&G Green field construction is an advnatage
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Job Description

• REs shall provide standing supervision of all civil and structural works to ensure compliance with the following authorities' requirements:
• The inspection of the bus depot involves the demolition and removal of the existing Pasir Panjang Distripark. Following this, the construction will take place for main depot building, dormitory and administration office.
• Knowledge of construction methods, materials, and safety protocols
• Supervise and monitoring of contractors’ work to ensure they are carried out in accordance with the provision in the contract document.
• To monitor the progress and assist SRE/QP on structural inspection on all Structural works according to the approved drawings issued.
• To review and supervise safety, environmental and health matters.
• Review and comment on contractor's submissions.

Job Requirements

• The RE shall have minimum three (4) years of experience as a civil engineer; and have least two (2) years shall be in supervision of works similar in nature to the Works in the Civil Contract.
• All RE shall have a diploma in the civil discipline or equivalent and be accredited by JAC of IES/ACES as QSS.

Work During Office hour

Monday to Friday: 8:30 a.m. to 5:30 p.m.

Saturday: 8:30 a.m. to 12:30 p.m. (Willing to work on rotation shifts)

Sunday and Public Holiday: 00:00 hours onwards or otherwise advised by project officer depending on LTA’s contractor work schedule.

Job Responsibilities

• Ensure successful and timely execution of projects
• Work with Design Department on generating Workshop Drawings (GA / P&ID / Electrical drawings)
• Conducting Factory Acceptance Test (FAT)
• Attending site vists when required
• Engagement and coordination with sub-contractors and clients on projects

Job Requirements

• Minimally possess a Diploma in Electrical Engineering
• At least 2 years of work experience in project management
• Experienced in 2D electrical design and drawings
• Positive attitude and committed to tasks dedicated
• Ability to manage multiple priorities and meet deadlines
• 5 days work week (Monday to Friday)

Qualification & Requirements

• Min 2 years working experience preferable in fabrication environment.
• Familiar with welding works, steel structure, winch, crane and zone rated added advantages
• Knowledge of ISO 9001:2008 QA system
• Software – AutoCAD, Solidworks ,MS Office
• Strong communication skills. English speaking and writing is a must
• Resourceful, independent and detail oriented
• Diploma in Mechanical Engineering or equivalent

Key Responsibilities

• Assist the department Manager(s) on project tendering including technical review, sourcing and cost estimating, project scheduling, drawings, procedures and documentation preparation etc.
• Overseeing of project execution as directed by Department manager including contract review (technical), vendors selection, costs evaluation, liaison for internal resources and supports, reply to client technical queries, prepare technical clarifications, plan and supervise project schedule , project execution and implementation, plan and implementation of corrective actions, Factory Acceptance Tests and finalization of as built documentation etc.
• Perform other ad hoc duties as assigned

Responsibilities:

• Design and produce single line diagrams of electrical/instrument system and determine the interface/termination diagrams in accordance with equipment specifications.
• Size cables and breakers LV/MV according to applicable rules and regulations.
• Review all electrical equipment, vendor’s proposals for technical accuracy and constructability
• Prepare material take off for bulk material orders of power and control cables, cable trays and ladders and various ship electrical equipment and systems according to project contract specifications.
• Prepare electrical equipment foundations/supports and room arrangement/layout, lighting layout, power/control cableway plan, power/control cables routing plan and cable schedules.
• Interface, size and design electrical equipment capacity e.g. switchboards, transformers, navigation, PABX, LAN and fire & gas systems, etc.
• Prepare electrical installation construction standard according to IEC/IEEE shipbuilding practice and international standard.
• Coordinate/execute contract specification requirements and production inputs into engineering drawing/document.
• Provide progress reporting and schedule management of engineering deliverables.
• Coordinate with other production team members, subcontractors and consultants to resolve technical issues onsite which affect the electrical schedule and project deliverables.
• Perform site visits to solve engineering problems when required to determine existing conditions or verify new construction.
• Meet with vendors, client reps, accreditation representatives when required.
• Review and reply to class comments
• Perform any other tasks as may be assigned by the supervisor
• Ensure compliance to relevant government regulations and company’s quality, safety, health and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum 3 years of relevant experience working in a marine/offshore industry either with shipyards or marine equipment manufacturers and a Diploma in Electrical Engineering or related engineering discipline or minimum 6 years of experience working in a marine/offshore industry either with shipyards or marine equipment manufacturers.
• Familiarity with Marine & Offshore rules, regulations and requirements.
• Knowledge of Intergraph Software will be an added advantage.
• Good communication skills, meticulous, resourceful, able to multi-task

RESPONSIBILITIES
Able to utilize advanced skills to perform complex preventive maintenance and corrective repair of buildings, industrial systems, vehicles, equipment and grounds. Working under limited supervision, monitors building system operations and performance. Utilizes several trade skills such as carpentry, plumbing, electrical, painting, roofing, heating and cooling.Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Inspects building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.

Oversees and inspects the work performed by outside contractors. Contracted work includes landscaping, snow removal, remodeling, HVAC, plumbers, and cleaning.

Performs assigned repairs, emergency and preventive maintenance. Completes maintenance and repair records as required.

Reviews assigned work orders. Estimates time and materials needed to complete repair. Orders necessary materials and supplies to complete all tasks.

Maintains an energy management program to ensure measures are taken to operate all systems in the most efficient manner to keep operating costs at a minimum.

Maintains the building lighting system, including element and ballast repairs or replacements.

Performs welding, carpentry, furniture assembly and locksmith tasks as needed.

Responds quickly to emergency situations, summoning additional assistance as needed.

Performs other duties as assigned.

- Provide support to operations maintenance staff in their work flow, maintaining, repairing and installation of HVAC units and Refrigeration systems. (Main tasks of the job scope)

- Mechanical general work

- Other ad-hoc duties as assigned

Job Requirements:

- Monday to Friday, 8am to 5pm

- Saturaday, 8am to 12pm

- Must be able to support OT on weekdays / weekends if needed

Interested applicant, please resume to [email protected]

Benefits:

• Working Hours: 8 am-6 pm (6 days)
• 14 days Annual Leave after confirmation
• 14 days Medical Leave (completion of 3 months service)
• $200 medical claim per year
• Performance Bonus (Discretionary)

Job Description:

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Civil Engineering / Geology or relevant vocational certificate
• Able to speak and write in English and Chinese in order to communicate effectively with Chinese-speaking clients and associates.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, self-driven and willing to take responsibility for assigned tasks as project engineer/manager
• Preferably Engineer specialized in Engineering / Civil / Construction / Structural or equivalent
• Only Singaporeans

You may send your resume / CV to email address directly:

[email protected]

Project Engineer

This role is a newly expanded role for a European MNC who is a APAC leader in industrial and material handling products, services, and solutions for various application such as automated warehousing, building maintenance, automotive and others. Come join this role and be part of the active players in this growing industries

Key Roles and Responsibilities

· Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.

· Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.

· Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.

· Manage day to day project activities including scheduling, coordinating and monitoring and reporting update of projects

· To supervise the execution of the works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document

· To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.

· Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist in verifying progress payments and claims from Contractors.

· Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule

· Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.

· Be the primary focal point between various parties

Qualifications & Experience

· Diploma or Bachelor’s Degree in Electrical Engineering/Electronics/Control Systems Engineering or related disciplines

Preferred Skills & Characteristics

· Self-starter and ability to self-manage strong interpersonal and leadership skills

· Must have high level of integrity, able to generate trust and build alliances with co-workers

· Familiar with Job Safety Analysis, Work Method Statement and Permit to Work application requirements and procedures

· Ability to maintain good project documentation and is familiar with ISO documentation requirements

· Safety certifications such as Working at Height, Construction Safety Orientation Course etc. is advantegeous

· Basic knowledge on Industrial Control Real Time Systems such as PLC/SCADA/IoT

· Additional skills in AutoCAD, Revit and Microsoft Office are advantageous

If you are keen to apply for this role, please click auto-apply

HRLinked Asia Search & Consultancy Pte Ltd (Registration No: 201910702W)

Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

5. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them

6. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.

7. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

PRISM+ is the largest Singaporean direct-to-consmer smart home appliances brand. Our mission is to offer cutting-edge products to the masses at affordable prices. We are a rapidly growing, ever-evolving organisation, and we are seeking new teammates to join us on our exciting journey.

Responsibilities:

• Manage existing Salesforce user accounts and handle provisioning for new users, ensuring proper access controls and configurations.
• Liaise with Salesforce Account Executives (AEs) on contract, billing, and licensing issues, ensuring smooth communication and resolution.
• Understand user processes across different business functions and translate them into technical design flows.
• Prepare and propose Statements of Work (SOW) for external partners (approximately 20% of the role).
• Develop and implement custom Salesforce flows and processes for internal use (approximately 80% of the role)
• Provide daily troubleshooting of Salesforce issues, errors, and failures to ensure minimal disruption to business operations.
• Design and plan user interfaces for ServiceCloud, ensuring a seamless and intuitive user experience.
• Continuously improve and optimize Salesforce workflows, processes, and user interfaces to drive efficiency.
• Identify areas for continuous improvement within Salesforce processes and workflows to enhance user productivity and experience.

• 3-5 years of hands-on experience as a Salesforce Engineer or similar role, with a focus on ServiceCloud and Field Service.
• Expertise in Salesforce Field Service with a deep understanding of Work Orders, Service Appointments, FSL Flows, and Work Order Line Items.
• Strong proficiency in Salesforce Flow, APEX, and Lightning components (Aura).
• Experience in ServiceCloud contact center setup and ongoing maintenance.
• Proven ability to work closely with both technical teams and business stakeholders, translating user processes into effective technical solutions.
• Excellent troubleshooting and problem-solving skills.
• Experience working with Salesforce Account Executives (AEs) on contracts, billing, and licensing issues is a plus.

Responsibilities:

• Conduct tooling Contract review, mold design review, mold trial review, project review meetings
• Liaise with Designers, manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery
• Provide timely updates and Gantt charts to BD group
• Attend mold testing and perform molding process optimization to achieve part consistency quality
• Study FA report for dimensional rectification according product form fit functions as required by the customer
• Lead team in problem solving – identification of problems and analysis of the root cause
• Liaise with suppliers for mold outsourching on all tooling related issues
• Provide BD with technical support and customers with tooling feasibilities; Prepare quotation for engineering change requests
  

Requirements:

• Diploma / NITEC in Precision Machining, Tooling Technology or relevant
• Experience in project management and tooling technical incline
  Good analytical, communication and interpersonal relation skills
• Able to evaluate, diagnose and troubleshoot problems
• A team player with ability to work under minimum supervision
  

Responsibilities

• Plan and co-ordinate on the project progress and schedule and ensure timely completion
• Attend project meeting and report on project status
• Prepare project budget and cost estimation
• Co-ordination of hookup and monitor of tools installations schedule
• Manage, control and monitor all project activities such as design, testing and commissioning of project

Competency Requirements

• Diploma or Degree in Electrical/Mechatronic/Mechanical Engineering
• At least 3 years of working experience in the related field
• Familiarity with semi-conductor/construction industry
• Proficient in Microsoft Office
• Knowledge of QA/QC procedure (PQR/WPS) will be an added advantage
• Multi-tasking team player with excellent interpersonal and communications skills
• Attended QEHS related awareness training

Responsibilities

Assist Senior Production Engineers in managing a production team that includes:

• Resources are used efficiently.
• Co-ordinating between other teams like Planning, Quality Control and other departments
• Ensure all the works to be carried out in a safe manner with proper methods, tools etc.
• Ensure production and safety SOP are being followed correctly.
• Meet customer’s requirements that include:
• Delivery Schedules
• Documentation
• Quality
• Safety

Requirements

1. Bachelor degree/Post Graduate Diploma in Civil & Structural Engineering from recognised University.

2. Ability to work independently.

3. Ability to adhere to schedule and keep proper records.

4. Strong teamwork spirit, proactive & good communication skills.

Position Summary

To supervise and coordinate the overall execution of projects assigned so as to ensure smooth delivery and handover to customers. This includes ensuring customers’ terms of order, meet delivery dates and installation completed with quality and safety standards as required by customers.

Job Description

• Manage and ensure project meets internal and client expectations with respect to quality, delivery timelines, and strategy required by Consultant/Owner with compliance to Workplace Safety Health (WSH) and prevent any Liquidated Damage (LD) imposed by Consultant/Owner.
• Maintain proper execution documentations and minutes of meeting to avoid claims and counter claims for delays or proof for extension of time with conduct periodic check on project filling and database to ensure it is properly file and relevant document are posted for easy reference.
• Develop and maintain good working relationship with the various parties at site that foster good client ties in the execution progress in order scope of works is not affected.
• Ensure own installation team and sub-contractors perform and comply with predefined quality scope of work and EHS standard.
• Communicate with Main Contractor/Consultant/Owner regarding project schedule and site facilities while manage customer changes throughout project and ensure deviations are commercially addressed ensuring configured documents are maintained at all times.
• Conduct bi-weekly project meeting with supervisor and feedback on the respective site issue and the progress of the projects.
• Assist General Manager and work closely with other departments, namely purchasing, quality control (QC) and Environment, health and safety (EHS) in promoting effective out-sourcing & sub-contracting.
• Review and approve WSH documents including Risk Assessment, Method of Statement, Safe Work Procedure, Fall Prevention Plan, Lifting Plan, Safety Management System, Permit to Work and ensure the work is carry out safely.
• Perform other tasks as delegated by the immediate superior.
• To comply with all relevant EHS legal and other requirements associated with the job functions and responsibilities.
• To comply with all EHS requirements affecting the operations, including those affecting the customers, suppliers and contractors supplying and serving the departments.
• To participate in EHS program.
• To follow the EHS procedures and work instructions.

Qualification & Experience

. Minimum Diploma in Engineering or equivalent years of experience.

· Minimum 3 years of working experiences in site management including 1 year of supervisory experience.

· Self-motivated with a results-driven approach.

· Good team player with ability to work independently.

· Working experience in a diverse cultural environment.

. Quality management system (QMS) fundamental & experience.

LOAD AND OPERATE HIGH-SPEED BLENDERS AND EQUIPMENT, PACKAGE MATERIAL FOR SHIPMENTS, INCLUDING WEIGHT AND QUANTITIES. ABLE TO UNDERSTAND AND REGARDING PLANT SAFETY AND OPERATIONS. FOLLOW BOTH VERBAL AND VISUAL INSTRUCTIONS. MAINTAIN GOOD HOUSEKEEPING. TRAIN OTHER OPERATORS WHEN ASSIGNED TO DO SO AND MAY BE REQUIRED TO RELIEVE OTHER OPERATIONS.

To identify project : Active participation and identification of prospective project through regular contacts with customer (face to customer)

· To liaise with allocated customer for sales acquisition

· To review customer requirements and prepare offers to allocated customer and follow-up offers with customer and keep updated project information

· To finalise and negotiate on contract with customers

· To commit and achieve the order intake budget

· To prepare project schedules

· To maintain existing account and help expand sales network

· Good contact with M&E Contractors & Consultant

Role Responsibilities

To manage and coordinate the production of quality shop drawings and BIM models in all projects assigned with minimal supervision. He/ She must be able to carry out HVAC/piping, equipment, pumps, dryer, filter & valves related drawings will be added advantages.

• To produce 2D drawings from BIM models with accuracy ensuring drawings produced are according to the Project or the Client’s Drafting Standards and Procedures, and that the drawing submission schedule is achieved.
• Maintain proper records of all issued & received models/drawings, Clash Reports, RFIs, etc.
• BIM Register following the company’s ISO Standards and Procedures and ensuring all the drawings are completed on schedule or promptly.
• Perform regular drawing backups and housekeeping work in the directory
• The secondary role includes developing technical plans, sections, details, and 2D/3D schematic diagrams using AutoCAD and in-house software.
• Accountable for the fluent/organized presentation, content correctness/accuracy of shop drawings production in form, fit, and function through thorough coordinates with other trades and services in 2D/ 3D submission.
• Responsible for ensuring full compliance with the company’s Shop Drawings Standard Operation Procedure, including adherence to design provision/scope of work according to contractual obligations.
• Generate a clash report based on the Matrix provided
• Work under the supervision of the Project Manager and perform the work tasks assigned.

Experience / Skills

• Degree/ Diploma in Mechanical Engineering or other relevant disciplines.
• Preferably with a minimum of 2 years of working experience in space planning, and design coordination, preferably on different scales of projects within engineering design consulting business.
• Having good knowledge of software such as Revit, and AutoCAD.
• Knowledge in Isometric drawings, LOD 350, and Plant 3D will be added advantages
• Good planning skills in managing modeling and drafting work.
• Possess strong initiative, and ability to work independently and within a team environment when required.
• Good interpersonal, written and verbal communication skills.
• Candidates with construction field experience is an added advantages

• Preparing and developing technical presentations to explain our company's products or services to customers.
• Discussing equipment needs and system requirements with customers and engineers.
• Collaborate with sales teams to understand customer requirements and provide sales support
• Timely response to customers’ sales enquires and determine appropriate product recommendations based on customers’ work processes.
• Provide quotation for project tenders and provide technical support to customers.
• Other ad-hoc duties as assinged

• Prepare comprehensive technical proposals and other necessary documents for tenders and bids.
• Communicate with sub-vendors (such as motor, coupling, and other suppliers).
• Participate in meetings with clients and stakeholders to clarify project requirements, address technical queries, and ensure understanding of the offered solution.
• Identify potential application issues, ensuring the correct pump selection and system integration.
• Collaborate and support the sales process by offering technical expertise during meetings, presentations, and customer negotiations.
• Skill for rotating machine trouble shooting.
• Experience for Vibration Analyst
• Experience working in rotating machine industry more than 5 years.