The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Task:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 7 years of relevant work experience in Diffusion Wet / Wet Etching Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Summary:

Co-ordinate with respective factory teams including CLS Tech Support, CLS Production, HPE Procurement, Material team, HPE Product Engineering team, Test team etc. to ensure all area of focus are well prepared and ready for factory inspection.

Detailed Description:

Performs tasks such as, but not limited to, the following:

• Prepare product sample for agency inspection.
• Perform internal product compliance audits.
• Verify relevant documentation revision and content.
• Prepare and host Factory tour (Incoming Inspection/Production Lines/Finished Products/Lab/Testing areas) with auditor/HPE representative.
• Coordinate product safety factory inspection with relevant engineers (Test/PE/Procurement) and Production to ensure compliance to applicable HPE standards and product regulatory requirements.
• Pursue Supplier CoC availability by purchased batches as “verification of purchased parts” for critical component materials from relevant Proc Engr (e.g. power supply/ PCB/ plastic materials/ batteries/labels) that is requested by the agency auditor.
• Traceability of manufacturer and flame rating for incoming material e.g. plastic material/PCB used in products.
• Keep in touch with relevant Global Product Regulatory team to track and understand the updates to requirements.
• Report any regulatory changes/escalation to management and inform applicable departments.
• Track and maintain the latest version certificates and test reports from the certification body.
• Ensures that the processes are carried out and comply with the specifications required by customers and that it complies with the local requirements of the organization and the requirements of MPS (Manufacturing Process Standards)
• Ensures that the specifications, the acceptance criteria of the products by the operational staff are known and respected; ensures that operators comply with product quality inspection procedures in accordance with customer requirements
• Provides support in order to optimize processes, identifies and initiates opportunities to reduce costs
• Prepares and collects data from the key points of the processes and prepares the internal quality reports
• Monitors product yields, process (yield) and scrap rate (scrap) or other quality indicators
• Participates in the activities of PFMEA, 8D analysis and elaboration of Control Plan
• Assesses and updates working instructions for specific products

Requirements:

• Bachelor's Degree in relevant fields
• 4 to 6 years relevant experience
• Strong knowledge in manufacturing operations Understand quality tools such as FMEA, PMP, SPC, 8D methodology, etc
• Good understanding and familiarity with safety regulations such as UL, CSA, TUV, CCC and standards (60950-1, 62368-1), China standard GB 4943.1, GB 9254.1, GB 17625.1
• Good understanding in ISO 9001:2015 Quality Management System (Certified ISO Internal Auditor Preferred)
• Attention to Detail: Strong attention to detail is crucial for identifying potential safety issues.
• Team Collaboration: Ability to work effectively with cross-functional teams, including design, manufacturing, and quality assurance.
• Technical Knowledge: Understanding of product design, materials, and manufacturing processes, as well as quality and process improvements techniques and tools.
• Problem-Solving Skills: Strong analytical skills to identify potential safety issues and develop solutions.
• Communication: Excellent verbal and written communication skills for reporting and training, effectively communicate with a wide variety of internal and external customers teamwork skills;

OTHER INFO:-

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• Working Days / Hours: 8am to 5.30pm / 8.30am to 6pm (Mondays to Fridays)

-----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Key Accountabilities

• Technical support to Group sales affiliates in the region for product groups such as control products, IAQ products and air conditioning installation material products
• Perform as the technical supporting desk
• Support the installation and commissioning for each job site
• Create demo kits for assigned product for regional promotion
• Support the marketing department to give the technical advice for the sales promotion enhancement
• Analyse and test product failures for better quality achievement
• Any adhoc duties as assigned by superior

Requirements

• Degree in Electrical/Electronic/Mechanical Engineering, or relevant
• Experience in air-conditioning or electrical industry will be an advantage
• Proactive and influential personality with ability to persuade and drive decisions
• Good to have PC programming and drafting skills
• Willing to travel with APEC regions

The key functions of Process Engineer is to:

1. Applies Engineering principles and techniques to optimise production process in the fab to meet department and organization goals and objectives

2. Analyse and troubleshoots process engineering, manufacturing, and maintenance issues, and recommend engineering solutions or developed work instructions for out of control processes

3. Leads production and manufacturing systems, improvement projects and develop operation plans in accordance with department and organization objectives alighn with regulatory requirements.

Tasks:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 5 years of relevant work experience in Thin Film CMP Process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

(Hiring for new branch located at BUKIT BATOK area)

IF YOU ARE looking for...

• Career advancement with work-life balance;
• Substantial flexibility in workplace;
• Mon.- Fri. office working hours
• Salary Range: Basic salary $2,600 ~ $3,500 + Incentive/Commission + Creative Performance Bonus)

Responsibilities

• Responsible for developing long term customer relationship and maximizing customer retention;
• Support on pre-sale and post-sale, not limited to solution proposal on technical requirement, design & budget control, timeline management, etc. based on projects;
• Participate in industrial related exhibitions, marketing campaigns/events;
• Other ad-hoc duties assigned by the superior.

Qualifications

• Min. Higher Nitec in Engineering (any field), or equivalent;
• Entry level applicants with the right learning attitude and positive minder are welcome to apply as comprehensive On-Job-Training will be provided;
• Excellent written and oral communication skills
• Pro-active, possess technical and Negotiation/social problem-solving skills with attention to details;
• Posse valid Class 3 driving licence is a MUST

How to apply,

Please submit your application together with your comprehensive resume, not limited to the education background, career history (if any), current and expected salary(if any), and availabilities to commence work.

(We regret to inform that only shortlisted candidates will be notified)

Job Title: Sputter Process Engineer (ID1603)
Location: Pioneer, transport pick up Singapore and JB Bukit Indah
Working Hours: 4334 days 12 hours shift
Night Shift: 8:00pm – 8:15am
Salary: $2800 - $3600
Benefit: 12 days Annual Leave, AWS and Variable Bonus


Job Description
• Ensure the sputtering machine is tuned to operate at maximum capacity without compromising performance.
• Adjust the sputtering parameters to maintain high-quality output, minimizing defects and inconsistencies.
• Regularly monitor and maintain the sputtering equipment to ensure it remains in optimal condition.
• Optimize the sputtering process to maximize the efficient use of materials, reducing waste.
• Work closely with teams from different departments to ensure smooth operations and address any cross-functional
• issues.
• Analyze data from the sputtering process to identify trends, issues, and areas for improvement.
• Based on data analysis, make precise adjustments to the sputtering machine to enhance performance and quality.
• Implement a continuous improvement approach to keep refining the sputtering process and achieve better results
• over time.
• Any other job assigned by superior.

Requirement:
• Diploma or Bachelor's degree in any Engineer-related field.
• Minimum 4 years of experience in manufacturing process related role for Diploma Holder
• Material Science & Chemistry Fresh Graduate for degree profile.
• Fresh Graduate with strong technical understanding
• Understanding of Sputtering technology
• Good knowledge of Minitab, Microsoft Office

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cloud Infrastructure Engineer (Endpoint Security) to join us!

Responsibilities:

· Work with Product Owner and Product Principals to operate the various endpoint security tools, including:

- EPP/EDR

- Data Loss Prevention

· Work with Central ICT Infra teams to operate the on-prem components of the SSE platform.

· Conduct system health check and proactively identify and troubleshoot issue in end-to-end manner.

· Manage the change, release, incident, problem management processes in ITSM platform.

· Document the requirement and specification to address the needs for all Public Service agencies.

• Comfortable with a 5-year direct contract
• At least 5 years of experience in the above domain areas

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS's privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

Job Description:

• To perform installation, troubleshooting, and repair works for machines
• To test, commission and provide support and training to the end-customer
• Replace spare parts and troubleshoot technical issues
• Conduct annual maintenance and service sales
• Maintain proper service records and spare-parts inventory

Requirements:

• Fluent in English and Mandarin (verbal and written) to liaise with China Supplier
• Higher Nitec, Diploma in Mechanical and/or Electrical Engineering or equivalent
• Min 2 years relevant working experience with strong hands-on technical skills
• Able to read and interpret schematic diagrams
• Willingness to work occasional long hours
• Available for occasional overseas travel for training and customer support

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Senior Cloud Infrastructure Engineer (Device Management) to join us!

Responsibilities:

Work with Product Owners, internal engineering team and Product Principals to oversee and co-ordinate the operation of various endpoint management tools, including:

1. Windows Autopilot
2. Intune
3. Application control
4. Scripting and automation
5. Virtual Desktop Infrastructure
6. Microsoft Graph API

• Co-ordinate with Central ICT Infra teams to operate the on-prem components of the above platforms.
• Oversee a team of Ops Engineers to manage the change, release, incident, problem management processes.
• Ensure timely handling of requests and queries.
• Lead incident response and recovery by analysing the root cause and submission of RCA report.
• Drive improvement in operation effectiveness by implementing the monitoring and alerting tools.
• Document the requirement and specification to address the needs for all Public Service agencies

Mandatory Requirements:

• Exam: Microsoft 365 Certified: Endpoint Administrator Associate, for demonstrating the skills and knowledge of endpoint management and security using Microsoft 365 tools and services.
• Proficient in PowerShell scripting

Additional Skillset(s) (Good to have):

• Prior experience in developing Windows desktop applications using C#, .NET
• Familiar with developing ServiceNow workflows
• Endpoint monitoring and observability for infrastructure reliability using tools such as NexThink, Riverbed, Dyatrace...etc

Additional 2 or more certifications (at least one from each group):

Group 1

1. DevOps Institute: Site Reliability Engineering Foundation or Site Reliability Engineering Practitioner, for demonstrating the skills and knowledge of applying DevOps principles and practices to the endpoint engineering process
2. ITIL 4 Foundation Certification, for demonstrating the skills and knowledge of the ITIL framework and best practices for ITSM.
3. Certified Information Systems Security Professional (CISSP) or CompTIA Cybersecurity Analyst (CySA+)

Group 2

1. Exam MS-102: Microsoft 365 Administrator: deploys and manages Microsoft 365 and performs Microsoft 365 tenant-level implementation and administration of cloud and hybrid environments
2. Exam AZ-104: Configure, manage, secure, and administer key professional functions in Microsoft Azure.
3. Exam AZ-140: Plan, deliver, manage, and monitor virtual desktop experiences and remote apps on Microsoft Azure for any device.
4. UiPath Certified Professional Automation Developer Associate or PL-500 Microsoft Certified: Power Automate RPA Developer Associate

Requirements:

• Comfortable with a 5-year direct contract (with perm benefits)
• At least 5 years of experience in the above domain areas

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS's privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cybersecurity Engineer (Cloud Infrastructure and Log Management) to join us. The employment contract will end on 31 March 2026.

You will be working on:

• Responsible to develop, setup and maintain large scale log ingestion cloud infrastructure.
• Responsible to handle the log ingestion workflow from Subscriber till backend SOC.
• Develop automation for end-to-end log ingestion processes to facilitate scalable ingestion infrastructure and provide better Subscriber experience.
• Develop and maintain custom log parsers.
• Monitor and respond to incidents for the cloud infrastructure and log ingestion system.
• Provide consultancy to Subscribers and their contractors on their log ingestion matters.
• Assist Subscribers on-site to setup and troubleshoot their log management system, ensuring their log are successfully being forwarded to the SOC.
• Engage stakeholders and enhance operations to improve on the log ingestion workflow/pipeline.

To succeed in this role, you will ideally have:

• Minimum 3 years of working experience in Cybersecurity.
• Minimum 3 years of working experience in one or more of AWS, Azure or Google Cloud Platform, doing Cloud Infrastructure or Cloud DevOps.
• Experience with IAC deployments and it’s best practices.
• Knowledge of SIEM or log parsers will be an added advantage.
• Good to have knowledge on Node.js, Python or other scripting languages
• Good to have knowledge and experience on GitOps
• Possess good communication skills and interpersonal skills.
• Passion for improving operations to ensure the system are secure and resilient.
• Self-motivated, driven, and possesses a strong aptitude for continuous learning.
• Good team-player who is willing to help the team to succeed in the achieving the objectives.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience. Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Job & Responsibilities:

• Coordinate with clients and internally for audit scheduling and other related matters
• Preparation & compilations of the relevant documentation/reports, ensure all paperwork, system, and filing is completed on time and accurately
• Assist in submitting documents to the relevant departments or companies
• Generate invoices, monitoring reports and customer follow up etc as per required deadline
• Attend to clients’ inquiries and ensure all requests and issue are resolved.
• Provide administrative support to the sales and operation team
• Attend, respond and monitor daily telephone and email enquiries
• Other ad-hoc duties as assigned

Requirements:

• Min GCE O Level / Nitec in any studies or above
• Strong attention to detail and meticulousness
• Strong organizational skills
• Good communication skills
• Ability to work independently & autonomously
• Proficiency in Microsoft Office application
• Fresh graduates are welcome to apply

Job Description & Requirements:

• Review of Civil & Structural working drawings and shop drawings in connection with SEM and steel structure shop drawings during pre-construction phase to prepare construction methods, identifying risks to promote strategies and alternative methodologies to mitigate.
• Organizing regular meetings with the sub-contractor's technical teams to resolve technical problems in pre-construction and construction phase.
• Working closely with Design team and LTA/QPS (client) to resolve execution issues with appropriate functional proposals with an aid of presentation or sketches.
• Preparing method statement for construction working including RA and SWP.
• Prepare of RFI for site inspection for construction, MPI test, welding works and post concrete works and also involving in site inspection with QP.
• Reviewing of rebar BBS prepared by sub-con in compliance with standards and shop drawings roof slabs, steel structures and corbel details for precast installation.
• Site Supervision of construction of structures such as pile cap, undergrounds tanks, base slab, column (~12m high) including corbel, RC beams, Capping beam, RC and PC beam connections, ramps, steel and RC struts, hanging sumps and staircases.
• Reviewing and site supervision of surface water drain and waterproofing shop drawings and site work.
• Assisting construction manager for planning and preparing daily progress reports
• Tracking and optimizing manpower for each works
• Preparation of conceptual drawings for steel decking or other temporary structures required on site and reviewing shop drawing submitted by sub-con and supervising site installation.
• Reviewing concept drawings and supervising installation of bracing connections between permanent plunge-in-columns for top down column construction.
• Reviewing sub-con's shop drawing for steel strut and supervision of installation work.

Vita Coco, the pioneer in coconut water and the #1 selling coconut water in the US, is a passionate, fun-loving brand in one of beverage’s fastest growing and most profitable segments. Beyond its impressive hydration and functional benefits, Vita Coco has built a real following in popular culture with celebrities, professional athletes, top-selling musicians, and many more. This is where you say SIGN ME UP. But we say, slow down cowboy, read the rest.

In a Nutshell, we’re looking for…

An Operations Engineer with liquid processing experience in the F&B sector, who will be responsible for providing operations support to strategic co-manufacturing partners and who will collaborate closely to implement innovative and continuous improvement initiatives. This role, based out of Singapore, will entail about 50% travel, primarily within the APAC region.

ESSENTIAL FUNCTIONS

Project Management

• Lead projects involving new plant installations and continuous improvement.
• Manage overall project timelines and coordinate with the different stakeholders to ensure on-time delivery of projects
• Work closely with co-manufacturing partners to provide technical support during entire project phase

Operations Support

• Provide Technical Support to ensure Quality, Productivity & Costs are optimized
• Assist in plant trouble shooting and in the resolution of manufacturing related issues
• Work closely with co-manufacturing partners and Corporate HQ in executing new package launches and commercialisation of new products
• Conduct audits of all co-manufacturing facilities to evaluate the manufacturing process and coordinate required follow-up actions
• Work closely with co-manufacturing partners and QA Team to investigate and resolve product quality issues
• Identification of cost savings and optimization opportunities in our co-manufacturing partners, define action plans to execute the actions needed so these are captured.

Innovation and Improvement

• Lead and execute trials with co-manufacturing partners in new process development
• Work together with co-manufacturing partners on product improvements and new product formulations
• Perform technical feasibility and manufacturing audits for potential new manufacturing partners and material suppliers

DESIRED SKILLS AND EXPERIENCE

• 4 years’ experience in the food manufacturing industry, preferably in beverages
• Familiar with factory manufacturing processes and constraints related to low acid food & aseptic beverage production
• Sound technical knowledge and liquid processing equipment, mechanical P&ID design and strong understanding on manufacturing procedures and sequence requirement.
• Exposed to food quality requirements such as HACCP, GMP and ISO Systems
• Excellent oral and written communication skills, interpersonal skills to work effectively in a multi-disciplinary team.
• Willingness to travel around the region (50%).

Vita Coco® is the brand that started America’s craze for fresh coconut water. Informed consumers, pro-athletes and nutritionists as well as in-the-know celebrities and influencers have all become loyal fans of coconut water, swearing by the Vita Coco brand for its delicious flavor, hydrating properties and replenishment benefits. Award-winning Vita Coco, which counts Madonna, Demi Moore and Matthew McConaughey amongst its investors, is one of the most sought-after products in the beverage aisle.

In the U.S. Vita Coco is sold at over 75,000 retailers including Whole Foods Market, Safeway, Target, GNC, Kroger, Publix, Ralph’s, Stop & Shop/Giant, Costco, select Wal-Mart stores and many chain and independent groceries and retailers. It is also sold in dozens of U.S. airports and university campuses, as well as online at Amazon.com.

Vita Coco was founded in 2004 and is based in New York City, with operations in Europe and Asia. Visit vitacoco.com for more details.

Roles & responsibilities:

1. Coordination with Construction team/ Design Consultant/PE/Construction Subcontractor, etc. for Detail Design Development.

2. Review Structural Analysis and Calculation carried out by design consultant and develop simple structural calculation for temp. works

3. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, Shop drawing development.

4. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, and Strutting etc.

5. Check/Rectification of all the structural drawing/shop drawing if required.

Requirements and relevant experience are as below:

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline.

2. Minimum 3 years of experience in Civil and Structural Engineering especially for LTA Project

3. Be well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure

4. Be well-aware of Underground Structure/Construction Sequences and related civil design works.

5. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards

* Candidates who has experience as CS Engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.

Job Description:
1. Design and engineering of Electrical Services.
2. Liaise and coordinate with architect, others consultants, owners and contractors in
development and implementation of the project until completion.
3. Provide project design and development.

4. Prepare drawings plan for submission to Authorities.
5. Prepare tender document and tender drawings for tender.
6. Attend to site progress meeting and site technical issues.
7. Work with others engineers and designer to complete assigned work within deadlines.
8. Liaise with authorities for plan approval and site inspection.
9. Conduct testing and commissioning of Electrical System.
10. Handover of the system during completion.

Job Requirement:
• Relevant degree recognized by PEB, Singapore in Electrical Engineering
• Extensive Electrical experience in designing M&E Building services, ideally with experience in healthcare project.
• Knowledge of relevant design standards and local authority regulations.
• Knolwedge of Autocad

· Responsible for developing, implementing, and maintaining Quality Plan for FA and production parts.

· Responsible for maintaining company measuring instruments.

· Interpret and analyse customer specifications with great details

· Identify, document, and report defects or anomalies, working closely with cross-functional teams to address and resolve issues promptly.

· Facilitate meetings for production and quality personnels

· Support in internal and external audits.

· Maintaining Company’s Quality Management System (QMS)

· Any other duties as assigned by Supervisor.

Job Requirements:

· Technical certificates in any Engineering field

· Effective communication skills, both written and verbal, to liaise with customers and suppliers

· Ability to work with production and office staffs

· Ability to write root cause analysis

· Flexibility and adaptability to take on new challenges and responsibilities.

· Ability to read and interpret mechanical drawings

Role Purpose(s)

Analyze, design, develop and maintain of IT applications, including documentation and post-implementation customer support

Key Accountabilities

• Participate in the development, testing, and deployment of software updates, enhancements, and configuration changes, ensuring compatibility with the existing system without disruptions.
• Ensure all support requests and incidents are handled within the agreed service levels, prioritizing critical issues and effectively managing workload.
• Maintain up-to-date technical documentation, including DRS, troubleshooting guides, and known issues, and share knowledge with team members to enhance team efficiency.
• Ensure all maintenance activities adhere to security policies, compliance standards, and best practices to safeguard data and system integrity.

Job Responsibilities & Duties

• Analyze, design, program, test, document and maintain IT systems or applications
• Provide maintenance support to customers (internal and/or external) by investigating and rectifying reported systems shortcomings.
• Analyze requests for enhancements/changes and write amendment/program specifications.
• Update system documentation.
• Perform and manage stages of the SDLC/ Agile Development and participate in the systems review with Project Lead/Manager.
• Understand the interdependencies of the services (application, system and database) and able to pin-point problem areas accurately to improve overall efficiency.
• Design and document system design, architecture and propose appropriate technologies and tools required to implement systems; and ensure users sign-off on design specifications.
• Use development tools to develop applications for better productivity.
• Develop test cases, conduct SIT, load test and tune the performance of systems to meet SLA.
• Deploy systems to production and provide post-implementation support.
• Provide technical guidance to junior colleagues in their work.
• Keep abreast of technological advancement, emerging standards and new software or hardware solutions that may affect decisions about system builds or enhancements.
• Any other duties as and when assigned.

Key Accountabilities

• Customer Focus
• Results Oriented
• Organisational Awareness
• Manages Complexity

Education Requirements

• Bachelor’s degree in Computer Science, IT or related fields

Working Experience Requirements

• 1 to 2 years experience in Agile Development and with a good understanding of Agile delivery. This is a must to have.
• Possess good experience developing Java EE web application and Java UI frameworks
• Certifications in Java, Java EE etc preferred.
• Some project leading experience in IT will be an added advantage
• 3-5 years of experience in systems analysis, design, programming with knowledge of one or more of the following technologies:
• Java, Java EE
• Struts, JSF, Spring, EJB, Hibernate, IBatis
• Weblogic Application Server, Elixir, Oracle DB, LDAP, MQ Series
• JBoss Application Server, Apache Tomcat, ESB
• Oracle Database, SQL, PL/SQL

Skills Required

Must-have skills

• Java
• SQL

Preferable skills

• MQ series
• EJB
• Weblogic Application

CrimsonLogic is proud to be an equal opportunity employer. We hire talented and passionate people of all backgrounds and create an inclusive workplace for all employees to develop and build their career with us.

Responsibilities:

The Senior Tunnel Engineer is responsible for, but not limited to the following:

1. Provide planning of tunnelling operation from safety, quality, and productivity viewpoint.

2. Provide engineering supervision to bored tunnelling operation, including final ring selection and selection of key.

3. Ensure the work is done in compliant with the protocol established for the project.

4. Whole related Tunnel Engineering Work.

Qualifications/Job Experience:

· Minimum 8 years of engineering experience after tertiary education in relevant field

· At least 5 years of experience in construction supervision of tunnelling works of similar scale, complexity and nature of work.

· TBM (Tunnel Boring Machine) experience

Requirements:

· Degree in Civil Engineering or equivalent.

· Experience in handling tunnelling projects.

· Ability to work under compressed air.

Responsibilities

● Collaborate with the sales/business development team to understand customer requirements and use cases, and identify how Company's Robotics solutions can address those needs.

● Conduct product demonstrations and presentations to potential customers, showcasing the features and benefits of company's robotics solutions.

● Develop proof-of-concept capabilities through ad-hoc software development and mechanical/electrical design with the help of internal engineering teams.

● Work closely with customers to understand their specific use cases and provide expert guidance on the integration of our robots into their operations.

● Create technical proposals and documentation tailored to customer requirements.

● Develop a deep understanding of Company's Robotics' products and stay up-to-date with the latest advancements in the field.

● Act as a technical liaison between customers and our internal engineering teams, ensuring a smooth transition from presales to implementation.

● Support the sales team by participating in customer meetings, technical discussions, and addressing customer inquiries.

● Provide feedback to to internal product development team based on customer needs and market trends

Requirements:

● Background in Computer Science/Electrical Engineering/Mechanical Engineering.

● Strong technical knowledge in their domain and the ability to work with customers.

● Should have at least one of the following:

○ Experience in Python or Javascript or C++. (or)

○ Experience in CAD software such as SolidWorks. (or)

○ Experience in mechatronics design such as working with Arduino or custom PCBs.

● Excellent presentation and communication skills.

● Ability to understand and address customer requirements and translate them into technical solutions.

Good to have:

● Experience with cloud computing platforms (e.g., AWS, Azure, Google Cloud).

● Familiarity with Docker, Jenkins, and other deployment tools.

● Exposure to backend system design to support robotics applications.

● Participation in robotics-related hackathons or competitions.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

ABOUT AMS

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

This role will initially support the LORADS-III program.

ROLE DESCRIPTION SUMMARY

The Senior Network Engineer is responsible for the design and implementation of network solutions for the respective ATM project and/or bid activity.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Network Engineer, you are accountable for:

• Develop or update solution architecture drawings and diagrams, cost templates (devis), the List of Supply (LOS) / Bill of Materials (BOM), and interfaces at the start of the project.

• Develop or update network contributions to the Solution Specification and Design documentation, Network Acceptance Test Procedures, and other associated network integration documents.

• Define equipment configuration for the ATM solution(s) and coordinate with Hardware Deployment and Integration management for assembly of the ATM system and interface with Tools Engineering, Customer Service and Site Services departments where necessary to accomplish this task.

• Load, configure, validate, and hand over equipment to Software Integration in the factory and on customer sites

• Support configuration changes to system platforms in factory and customer sites.

• Proactively support Project Design Reviews

• Provide customer training

• Identify risks at solution architecture level and propose where possible alternate validated solutions

• Provide system and networking expertise

• Follow and contribute to the development and enhancement of engineering processes

In a leadership capacity, provide support to Work Package Manager:

• Develop and maintain objectives, strategy and roadmap

• Ensure that deliveries (including associated documentation and engineering artefacts) are on time (as per schedule and milestones) with the expected level of compliance

• Contribute to key milestones and provide input into triage and change boards

• Track team progression against the agreed plan, provide task estimation and forecasting as input into the weekly status dashboard

• Identify risks and propose mitigation solutions

• Relay key communications to team through daily/weekly team meetings

Responsibilities to the team:

• Is main point of contact for the team on functional or technical topics, or knows who to contact

• Performs allocation and prioritisation of tasks for the team

• Responsible for the quality of the teams outputs, including compliance to the configuration management process

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

• Degree in Engineering, IT or related discipline

• Cisco formal certifications (CCNP, CCNA etc)

Essential Experience

• 5+ years experience in similar positions on projects delivering complex software-centric real-time systems.

• Proven experience in leading small teams

• Demonstrated experience in the design of infrastructure and network architectures

• Demonstrated experience in the design of network architectures inline with security standards and policies

• Sound level of knowledge and experience with Unix/Linux (Redhat distribution preferred) Operating System

• Familiarity with a wide range of Computer and Networking hardware (preferably Cisco)

• Scripting (TCL/TK, Perl, & Shell)

• Able to work on multiple activities con-currently and effectively self-manage (autonomy)

• Experience with collective decisions and conflict resolutions

• Capability to manage various stakeholders having different objectives

• Proven capability to work in a multi-cultural environment and with variety of international customers.

• Aptitude to work effectively in a multi-disciplinary integrated team environment

• A positive attitude combined with excellent interpersonal and motivational skills.

• Sound judgement and independent decision-making capability where necessary

• Excellent written and oral communication skills in English

Desirable:

• Work experience in a mission-critical, near real-time environment preferably ATC-related

• Experience in large and distributed networked computer system

• Experience in working in a Scaled Agile Framework (SAFe)

• French Literacy

GENERAL / SPECIAL REQUIREMENTS

• Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

• An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

• An advocate for a culture of continuous improvement

• An advocate for Accountability, transparency and curiosity

• Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

• Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

• Be eligible for Security Clearance from the Singapore Ministry of Home Affairs (CAT2)

• Occasional international travel may be required

ABOUT THALES

Thales established its presence in Singapore in 1973 to support the expansion of aerospace-related activities in the Asia-Pacific region. Throughout the last four decades, the company grew from strength to strength and is today involved in the primary businesses of Aerospace (including Air Traffic Management), Defense & Security and Digital Identity & Security. Thales today employs over 2,100 people in Singapore across all its business areas.

ROLE DESCRIPTION SUMMARY

The Network and Infrastructure Integration Engineer is responsible for the provision of the infrastructure platform: network equipment (switches, routers, firewalls) and compute equipment (servers and workstations), including the deployment of the SOE (Standard Operating Environment) for the respective project and/or bid activity. The Engineer is a key member of the Hardware and Infrastructure discipline team that provides:

· Technical and resource supervisory input to network integration and infrastructure deployment engineering activities,

· skilled input to the network integration and deployment activities within the respective project engineering segment, and

· assistance to the Integration Group for bid response activities.

KEY ACTIVITIES AND RESPONSIBILITIES

The Network and Infrastructure Integration Engineer provides effort and expertise in two areas: Projects and Bids.

For Projects:

· Revising solution architecture drawings and diagrams, cost templates (devis), the List of Supplies (LoS) / Bill of Materials (BoM), and interfaces at the start of the project.

· Create and/or update network integration engineer contributions to the Solution Specification and Design documentation, Network Acceptance Test Procedures, and other associated network integration documents.

· Reviewing definition documents, solution specifications, design documentation, acceptance test procedures and other associated documentation to align with project objectives, and participating in the product integration and verification phases

· Defining equipment configuration for the ATM solution(s) and coordinating with Hardware Deployment and Integration management for the assembly of the ATM system. Also interface with Tools Engineering, Customer Service and Site Services departments where necessary to accomplish this task.

· Load, configure, validate, and hand over equipment to Software Integration in the factory and on customer sites.

· Support configuration changes to system platforms in factory and customer sites.

· Attend Design Reviews with customers.

· Provide customer training.

· Identify risks at solution architecture level and propose where possible alternate validated solutions.

· Provide system and networking expertise useful in the design.

· Follow and contribute to the development and enhancement of engineering processes.

For Bids / Tenders:

· Definition of system hardware architecture and interfaces.

· Develop and peer review of the system Architecture Diagrams.

· Develop and peer review of the List of Supplies (LoS) / Bill of Materials (BoM)

· Develop hardware integration engineering estimates (devis)

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· Bachelor’s degree in Electronic Engineering or Computer Science discipline or any other relevant fields, with at least 5 years of relevant experience

· Good level of knowledge of, and experience with Linux Operating System (Red Hat Enterprise Linux distribution preferred)

· Experience in scripting and programming languages (Shell, Python)

· Experience in large and distributed networked computer systems is a highly desirable

· Good understanding of networking protocols (e.g., IPSEC, HSRP, BGP, OSPF, 802.11, QoS) and Hands-on experience with monitoring, network diagnostic and network analytics tools

· Familiarity with a wide range of compute (HP, HPE, Lenovo, Dell) and networking (Cisco, Juniper) hardware from major manufacturers

· Work experience in a mission-critical environment (ATC-related is highly desirable)

· Solid understanding of hardware integration and testing processes

· Practical experience of validation and integration of hardware components on large, complex, software-based systems

· Strong communication skills, with the ability to write clear and concise documents that clearly articulate complex technical detail

· Able to work on multiple activities concurrently and effectively self-manage (autonomy)

· Able to work under pressure

· Cisco formal certifications (CCNP, CCNA etc) is desirable

· Cisco/Juniper NW automation desirable

General/Special Requirements:

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

· Be eligible for Security Clearance from the Singapore Ministry of Home Affairs (CAT2)

Electrical Project Engineer / Licensed Electrical Worker (LEW)
Working Hours: Monday-Friday [ 830am - 530pm ]
Address: 1 Bukit Batok Street 22, #04-01 GRP Building, Singapore 659592
Salary: $2,000-$4,000

Requirements:

• Degree in Electrical Engineering (Major in Power)
• Prefer with Class 3 driving license

Responsibilities:

• Preparation of technical specifications.
• Carry out site inspections on LT and HT installations per EMA requirements.
• Assist PE/ LEW to carry out switching of electrical panels.
• Standby and attend emergency call up services at customer installations.
• Prepare incident reports, technical proposals, etc.
• Site supervision of sub-contractors on maintenance works.