Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

· Drive Technical and Maintenance support to all operating facilities in instrumentation and control systems, including ICSS / DCS / PLC

· Ensure the installations are maintained and managed with respect to regulatory requirements

· Actively contribute with technical and advisory support to Operations Managers / Maintenance Managers and offshore facilities in terms of Instrumentation and Control Systems

· Actively contribute to incident investigation and provide technical support to Emergency Response team as and when required

· Participate in planned shutdown as and when required

· Review and provide the engineering solutions for Management of Change Request from Facilities as per procedure

· Review the Shutdown / Breakdown Reports and verify / carry out Root Cause Analysis

· Update Lesson Learned Register based on Management of Change Request, Shutdown / Breakdown Reports review, Survey / Audit Reports etc.

· Provide in-house training for the offshore team as and when required

· Carry out competency evaluation for onboard E&I Supervisors and Instrument technicians as requested

· Provide budget requirements in terms of maintenance, long term plan and surveys

· Provide input for new project bids and variation orders, based on Lessoned Learned from operating facilities

· Act as a mentor and resource for new employees and less experienced colleagues

· Continuously make suggestions for improvements in all spheres of influence

· Additional responsibilities as required

About Us

Vivo Surgical is a patient-focused, clinician-driven medical device developer and manufacturer. Headquartered in Singapore with offices in China and Thailand, we are pioneering a novel endoscopic surgical robot for complex endoluminal surgeries. ISO 13485 certified with international accreditations awarded such as the US FDA and European CE mark, our devices target the medical needs of the world through innovative applications of science & technology. These encompass such fields as in vivo surgical LED lighting, portable endoscopy and endoscopic robots, which are strategically co-developed with world-class healthcare institutions and KOL collaborators. Join us as we build towards our vision of being Asia Pacific’s leading medical device developer and manufacturer.

About The Role

We value the importance of having a robust engineering team that would serve as a key pillar for sustained commercial success. To that end, we are looking for an Electrical Engineer to join us on this journey. In this role, you will be part of our fast-growing team and will take ownership of your role from the get-go. You will be working on the electrical interfaces of our robot from the design and development phase all the way to manufacturing. You will be developing these solutions alongside our clinical KOLs to produce and test the parts and subsystems that will eventually be integrated into the robotic system. Throughout the process, you will also be involved in the verification and validation testing phase such as producing testers, generating test protocols and reports. Your role will require you to work in close tandem with our external partners and suppliers.

Your responsibilities shall include the following:

• Involved in the establishment of the robotic system’s design requirements according to users’ needs.
• Design and develop hardware system architecture and electrical systems based on set requirements.
• Generate schematics and electrical diagrams following respective standards and best practices.
• Source, evaluate and troubleshoot components, PCBAs, wire harnesses and subsystems.
• Assist in developing test protocols and reports to verify various subsystems and the main system.
• Involved in developing testers and test tools for verification tests.
• Support the team with electrical safety and EMC testing.
• Take part in the design control and risk management documentation generation tasks.
• Work with the team to optimize the system’s cost, manufacturability, quality, and reliability.
• Contribute and watch your ideas materialize into the fast-paced iterations of our system to constantly strive to meet the end users’ needs.

Your Qualifications & Experience

• Minimum Bachelor’s degree in Electrical Engineering, or related.
• At least 3 years’ experience in Electrical, Embedded Systems, Robotic Engineering, or related fields.
• Skilled in PCB design software such as Altium Designer or other similar tools.
• Experience in circuit design with ARM MCUs is essential.
• Hands-on experience with embedded communication protocols such as UART, I2C, SPI, CAN, TCP.
• Knowledge of embedded platforms such as MCUs (STM32), DSP, FPGA will be advantageous.
• Adept at utilizing equipment such as multimeters, oscilloscopes and spectrum analyzers.
• Hands-on experience with soldering equipment and crimpers preferred.
• Knowledge of C/C++ and Linux will be an advantage.
• Understanding of standards such as IEC 60601-1, 60601-1-2 and 62304 will be a plus.
• Strong analytical, troubleshooting, problem-solving, and communication skills.
• Ready to embrace a positive and collaborative mindset to thrive in the dynamic start up environment.

Contact

Please send your CV and cover letter to: [email protected]. We look forward to receiving your application.

Overall Summary:

Network Engineer will drive the implementation of strategy for infrastructure operations and maintenance to ensure availability of stable and secure systems. He/She manages project resource allocation and develops infrastructure implementation, operations and maintenance engineers; scopes out policies and sets performance expectations. He identifies problems and presents new methodologies and/or solutions to key stakeholders to enhance and improve the delivery of infrastructure operations and maintenance services.

Roles and Responsibilities:

Support infrastructure design and implementation

• Support technical system analysis to determine the extent to which solutions perform “as required” to ensure that future solutions meet anticipated demand
• Support the design and implementation of infrastructure solutions that adhere to current architecture standards
• Lead the design installations, system migration and integration
• Lead the testing and handover of implemented infrastructure solution

Support infrastructure operations

• Support delivery of optimal infrastructure operations
• Create documents on administration, installation, configuration and troubleshooting
• Apply diagnostic tools to perform technical analysis of complex software, hardware and infrastructure equipment
• Support the development of report on infrastructure capabilities and limitations

Maintain infrastructure

• Support the improvement of maintenance capability by using automation for upgrades, enterprise backup and storage
• Identify key infrastructure operations issues and maintenance priorities
• Support the implementation of agreed infrastructure change requests and maintenance routines
• Develop report on performance and availability of infrastructure systems by review of service uptime, utilisation, throughput etc.

Optimise infrastructure performance

• Support the initiatives to improve the infrastructure systems and service delivery through automation and virtualisation technologies
• Support the monitoring of performance, availability and security of infrastructure systems and key operational metrics

Resolve incidents

• Support problem/issue identification and resolution
• Escalate problems/issues
• Support simulation of user problems to resolve operating difficulties
• Diagnose problem source through discussions with users
• Recommend system modifications to reduce user problems
• Support planned maintenance events, system backup processes and disaster recovery drills
• Support implementation of preventive solutions

Qualifications/ Requirements:

• Bachelor in Computer Engineering
• Possessed CCNA, CCNP, CCIE is preferred.
• At least 5-8 years of network experience
• Experience in leading a team of 3-5 network engineer.
• Familiar with Cisco, F5, VM
• Exposure to large scale project execution
• Open to support patches/ upgrades and Tech refresh (after office hours/ weekends)

Job Description

• Conceptualisation and design of facades, preparation of drawings and structural calculations
• Delivery of technical presentations
• Coordination with clients, architects, consultants, façade contractors, suppliers and other project team members
• Supervision of construction, site inspection and training of constructors
• Preparation of technical submissions, proposals and documentation

Job Specifications

• Singaporean or PR preferred
• Degree in Civil, Structural or Mechanical Engineering or related disciplines.
• 3 – 5 years of experience in façade design, engineering and construction and project management
• Proficient in CAD software to create designs and solve technical issues.
• Strong and diverse technical background with effective presentation skills
• Well-versed in construction trends, international design standards and building regulations.
• Possess a wide network of building professionals and property developers.
• Ability to multitask and work well in a team

Knowledge, Skills and Abilities

• Proficient in CAD and 3D Modelling software - Revit, Rhino, Sketchup software
• Possesses deep understanding about various façade materials.
• Well informed in construction trends, international design standards and building regulations.
• Demonstrate organisation and communication skills
• Possesses relationship building and networking skills.
• Skilled in interacting with people of diverse cultural backgrounds at various levels.
• Possesses strong project management skills.
• Willing and able to travel as needed (1 – 2 times/month)

Position Summary:

The Systems Engineer undertakes complex projects related to systems

provisioning, installations, configurations as well as monitoring and

maintenance. He/She applies highly developed specialist knowledge and

skills in systems administration and works toward continuous optimisation

of systems performance. He/she implements systems improvements and

instructs other IT staff in the resolution of complex issues. He/She is required

to be on standby with on-call availability with varied shifts including

nights, weekends and holidays.

He/She is able to quickly and effectively solve issues as they arise. He/She is able

to methodically identify the cause of the issue, evaluate it and develop a

solution in

collaboration with the team. He/She communicates effectively and displays

high level of service standards.

Role and Responsibilities:

Execute Systems Administration Service Levels

• Monitor systems performance and usage, including response times
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security
• Determine the systems’ short- and long-term requirements
• Manage systems report production

Advise on System Capabilities

• Advise senior leaders on system concepts and functional capabilities
• Provide technical advice to the team and clients on installation, setup configuration of systems
• Interpret internal or external business issues and recommends solutions/best practices
• Implement plans to make systems available to users in a shared, secure and controlled manner

Develop New Systems

• Lead the development of new systems as per the system requirements
• Design security and integrity controls
• Conduct new systems testing and implementation
• Define the system maintenance procedures
• Analyse the use of new systems to identify enhancement needs
• Lead research initiatives for the development of advanced and automated approaches for system administration
• Optimise systems performance
• Seek opportunities to optimise the delivery of systems services with emphasis on availability, reliability, scalability, and security
• Conduct regular system audits and upgrades
• Develop automated processes to define, measure, and report on service quality, stability and capacity Resolve issues
• Oversee the assessment of risks to systems
• Identify complex system issues to provide advisory to the stakeholders
• Investigate cause of systems issues
• Resolve complex issues
• Provide escalation support for issues presented by the user

Requirements / Qualifications

• Degree in Computer Science, Engineering or equivalent.
• At least 5 - 8 years’ experience in developing, implementing and
• maintaining IT systems
• Systematic in approach and familiar with enterprise level troubleshooting.
• Strong communications skills with stakeholders and ROs.
• Experience in healthcare applications preferred and/or willing to take up the challenges in a healthcare related industry.

Position Summary / Project Description

This is for the Automation Team under the Systems Technologies which focuses on DevOps and automation for internal IT that includes a lot of automation work around IaC.

Roles And Responsibilities

• Design, develop and implement various infrastructure automation and robotic process automation to transform current operation processes.
• Present ideas for process/system transformation
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks
• Ensure smooth transition of processes

Requirements / Qualifications

• Minimum Degree in Computer Science / Information Technology or equivalent.
• Proficient in automation technologies such as Ansible, Chef, CI/CD, Jenkins, Terraform etc.
• Minimum 4 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating incidents and underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focuses on developing the technology and demonstrating Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave circuits and subsystems.

Qualifications

• Possess a Bachelor or Master degree in Electrical Engineering
• Experience in the simulation and design of microwave circuits and subsystems.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Tasks:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• ecome the technical Expert for the respective machine specialization.
• ● Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials Engineering / Material Sciences / Chemistry / Chemical
• Min 2 years of relevant work experience in Thin Film CVD Equipment in the semiconductor industry
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Purpose:

To support the Program Manager in strengthening existing customer relationships and ensuring smooth day-to-day operations, which include New Product Introduction (NPI), Order Administration, BOM Management and Planning.

Job Description:

1. Customer Relationship Management

• Build and maintain strong relationship with customers by identifying and assessing customers’ current and future needs
• Timely fulfilment of customers’ orders or communication of schedule revision
• Liaise with internal departments to ensure orders will be fulfilled on time
• Respond to all customers’ inquiries promptly
• Prepare and provide reports and proposals to customers as required
• Support customers’ audits and visits when necessary

2. New Product Release

• Responsible for ECN (Engineering Change) and new BOM (Bill of Material) management, which includes item master creations.
• Ensure that all ECNs and BOMs are cross checked before releasing it and any ad hoc amendment to the BOM through internal ECN or waiver
• Manage FAA (First Article Approval) submission and approval.
• Define Production Routing Guide for manufacturing
• Ensure packing handling units (carton & palletization) are defined accordingly
• Maintain customer part numbers in ERP system
• Manage EOL (End of Life) of products.
• Handles new customer requirement that involves ERP system update and UAT
• Work together with manufacturing engineer & production to define the relevant process or packing instruction
• Maintain the relevant documents pertaining to BOM management, which includes work instruction, sticker placement
• Interface customer with respect to NPR, ECN, and FCS launch management
• Prepare samples for customer review/approval
• Prepare and participate in customer audit on new SKUs or artwork
• Create BOM structure for all new product release from sketch and maintain item, BOM, ECN and void in customer's SAP as per customer requirements

3. Report and Masterlist Tracking

• Ensure FAA Tracking List and BOM masterlist are well maintained
• Prepare launch tracking report
• Prepare QBR data on relevant sections
• Prepare weekly/ monthly reports as requested by customers and management

4. Order Processing

• Acknowledge and process sales orders, coordinate with various departments and related parties to fulfil order
• Prepares samples, price estimates and quotations within customer’s expectations and timeframe
• Creates work orders for production and replacement work orders if necessary
• Ensure prompt billing of invoices and assist in overdue payment collection
• Manage customer’s product content effectively

5. Material Planning

• Plan and make purchase requisition for necessary materials to ensure materials availability in meeting production needs while minimizing inventory holding/costs
• Manages inventory level for raw materials, work-in-progress and finished goods
• Analyse order trends and prepare forecast schedule to material planner

6. Productivity and Innovation

• Identify potential improvement initiatives
• Implement feasible improvement initiatives to enhance effectiveness, efficiency and/or economy

Job Requirements:

• Diploma/Degree in Business Administration, Supply Chain Management or other relevant fields
• 1 – 2 years of experience in operations/supply chain environment (Program Administrator)
• 3 – 5 years of experience in operations/supply chain environment (Senior Program Administrator)
• Strong interpersonal skills with good presentation and communication abilities
• Independent and proactive, with strong customer service orientation.
• Experience in printing and packaging industry will be an added advantage
• Knowledge in MRP and SAP systems will be added advantage

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Task:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 7 years of relevant work experience in Diffusion Wet / Wet Etching Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities

· Field service work on highly complex equipment which involves troubleshooting, diagnostic and repairing at customer wafer fab in local and overseas facility.

· Knowledge of Laser and optics is beneficial.

· Prepare field service reports on work activity and provide customer with supporting functions on re-occurring problems.

· Training and OJT will be provided.

Requirements

· Bachelor’s Degree or Diploma in Mechanical/Mechatronics/Electrical/Electronics Engineering

· Good interpersonal/communication skills in understanding customer needs.

· Shows initiative and can work independently.

· Able to work overtime and travel at short notice when required.

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Bruker offers differentiated, high-value life science and diagnostics systems and solutions in preclinical imaging, clinical phenomics research, proteomics and multiomics, spatial and single-cell biology, functional structural and condensate biology, as well as in clinical microbiology and molecular diagnostics.

Please visit www.bruker.com.

Bruker - Innovation with Integrity.

Bruker Singapore is seeking for an IT Service Engineer based in Singapore. He/ She is responsible for providing technical support and assistance to end-users within an organization. They are tasked with troubleshooting and resolving software and hardware issues, as well as configuring and deploying new hardware and software systems. The ideal candidate for this role should possess excellent problem-solving skills, strong communication skills, and the ability to work both independently and as part of a team. This is a two years contract (subject to renewal).

Areas of Responsibilities :

• Operate the day to day IT Service Desk to our employees through emails and online ticketing system.
• Monitors and track incident, service request in IT ticketing system. Responsible for dispatching and escalating ticket to next support level. Continuous monitoring and forward movement of end user issues until they are resolved.
• Manage and operate the installation/delivery of all End User Device including Desktops, Laptops, Monitors, Phones, Printers and Mobile device.
• Responsible for all PC heath status; ensure all computers are properly patched and virus protected.
• Provide assistance to users regardless of their geographical location.
• Performing any other IT related duties including on-demand project.
• Manage telecommunication system and cabling system. Work with external vendor to ensure smooth operations and SLA are met.
• Prepare and participate in disaster recovery and unscheduled shutdown drills
• Prepare report as request by management.
• Willingness to travel up to 30% in Asia Pacific
• Any other ad-hoc tasks assigned

Preferred experiences and qualifications:

• Minimum Diploma level (preferred) in a Computer Science or equivalent
• ITIL foundation certification highly preferred
• Some working knowledge in an IT Support Organization
• Preferably 1-3 years of related working experience
• Experience in handling different level of end users
• Experience in handling user request and communicate expectation
• Candidates with relevant qualifications are encouraged to apply

Technical Skills:

• Working knowledge of Microsoft Server and Active Directory
• Working knowledge of Microsoft Technology in General
• Working knowledge of Windows Operating System
• Excellent administration and reporting

Personal & Organizational Skills:

• Good problem-solving skills.
• Good communication skills, written and verbally across all levels of the business
• High analytical problem solving and troubleshooting skills
• Excellent task management skills
• Customer service focused
• Language: English – fluently, both written and verbal

Bruker is an equal-opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, and other protected characteristics.

Certain positions at Bruker require compliance with export control laws and as a result, all interviewed candidates for all positions will be screened pre-interview to determine their eligibility in light of export control restrictions.

ROLE DESCRIPTION SUMMARY

Thales is seeking suitable candidate for the position of Service support engineer.

You will be maintaining and troubleshooting the hardware infrastructure and systems for a mission-critical Seamless Identity Management Platform for Experience (SIMPLE) system that Thales Solutions Asia (TSA) have designed for Singapore Changi Airport.

You will be part of a team of dedicated engineers that demonstrate superior technical competency in ensuring system availability, performance and security

KEY ACTIVITIES AND RESPONSIBILITIES

As aField Service Engineer, you are accountable for:

· Field Support. To carry out Corrective Maintenance (CM) as a result of failure of the hardware and software related to SIMPLE. To restore the system to its operational condition. To monitor and maintain the records of the overall system operational availability and reliability, including Mean Time Between Failure (MTBF), Mean Time to Repair (MTTR), system downtime duration and the types of hardware defects as well as all related software versions, patches.

· Field Testing. To carry out software testing on the system whenever there is a new software bug fixes. To ensure the correct configuration of the system is loaded for software / system testing and before the system is used for production.

· Spares Services. To manage the spares provisioning, support and test equipment and other tools that are stored at Authority site. To undertake store keeping functions in respect of receipt, issue and disposal. To carry out serviceability check on the spares and to ensure prompt and appropriate action is taken to rectify any fault on the spares. To monitor the end-of-life and end-of-support status of the spares and installed hardware.

· Preventive Maintenance (PM). To carry out PM on the hardware to retain the system in the specified operational condition in accordance to the planned maintenance schedule. In carrying out the PM, to follow the approved PM checklists to perform calibration, servicing and verification of system configurations. To submit the PM report after each PM.

· Calibration Services. To liaise with vendor to perform calibration services on the test equipment that are used for the preventive maintenance.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· 2 shifts of 12 hours, 24x7 operation

· Able to cope in a highly pressured fast-paced environment

· Prior working experience in any Server / Network / Uninterruptible Power System / Security products such as Firewall, PIM and PAM and Server Virtualization will be an added advantage

· Customer orientated with high level of service attitude

· Good listening and analytical skills

· Hardworking, outgoing and enthusiastic

· Positive working attitude

· Team player, and also able to work independently and with little supervision

· Able to thrive in a dynamic environment

· Able to understand the system and architecture diagrams

· Able to understand the user operation environment

· Willingness to pick up new technologies

· Perform other job responsibilities as and when assigned

Education

Diploma / Bachelor’s Degree in IT/Engineering discipline

CCNA certified

Experience

Minimally 1-2 years of experience in supporting network, security, server and UPS

Minimally 1-2 years of experience in supporting mission critical systems with a stringent SLA of 99.9%

Well-versed in IT Service Management (ITSM) standards, processes, guidelines and best practices will be an added advantage

• Position : Site Engineer - Up to $4,200 - Seletar
• Location : Seletar
• Working hours : 5 Days Work Week – Monday to Friday: 8.30AM to 6.00PM
• Salary (commensurate with experience): Up to $4,200 + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Aerospace

Responsibilities:

• Create solutions to complex technical problems in life science, Power, water treatment, chemical and petro-chemical, shipyard and oil and gas plants.
• Do field/ bench Calibration of measuring instruments like Pressure, Temperature, Flow, radar level, analyzer, wireless and collect data
• Calculate calibration range, mA, Freq, required output and accuracy before doing calibration and record the result during calibration
• Analyze and compile technical and statistical information and prepare report
• Maintain accurate engineering documents

Requirements:

• Minimum Diploma in Electrical / Electronic / Instrumentation
• Minimum 3 years of relevant experience in the same field
• Knowledge relating to Mechanical and Measuring Instruments
• Technical report writing and able to read the schematic diagrams
• Preferably with Class 3 Driving License
• Bilingual in English & Mandarin to liaise with Chinese associates who can only speak mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Responsibilities:
Barista Duties:

• Prepare and serve a variety of hot and cold beverages, including coffee, tea, and specialty drinks, to a high standard.
• Operate coffee machines and other equipment with care and precision.
• Ensure consistent quality of drinks by following recipes and presentation guidelines.

Service Crew Duties:

• Greet customers warmly and provide excellent service throughout their visit.
• Take orders accurately and provide recommendations based on customer preferences.
• Serve food and beverages efficiently and professionally.
• Handle payment transactions using the point-of-sale system.

General Duties:

• Assist in opening and closing the cafe, including setting up and cleaning down.
• Handle customer inquiries, complaints, or feedback politely and effectively.
• Support team members in daily operations and ensure smooth workflow.

Requirements:

• Previous experience as a barista or in a customer service role is an advantage, but not required (training provided).
• Passion for coffee and providing excellent customer service.
• Ability to work in a fast-paced environment while maintaining attention to detail.
• Positive attitude, teamwork skills, and willingness to learn.
• Strong communication skills in English and Chinese
• Availability to work flexible shifts, including weekends and holidays.

About Us:

We are a dedicated Chinese tutoring center passionate about providing top-quality educational services to children. Our team is driven by a shared mission to foster growth and learning in students while creating a supportive, family-like environment. We are now seeking a talented individual to join us as a Customer Service and Administrative Supervisor.

Job Description:

As the Customer Service and Administrative Supervisor, you will play a key role in maintaining smooth day-to-day operations while ensuring excellent service to our students and their parents. You will oversee customer service interactions, ensuring all inquiries are handled professionally and efficiently, while also managing administrative tasks that support the organization.

Key Responsibilities:

- Serve as the main point of contact for parents and students, delivering exceptional customer service.

- Address customer concerns, resolve issues, and manage inquiries with care and professionalism.

- Perform administrative duties such as scheduling, coordinating appointments, and maintaining records.

- Collaborate with the team to streamline workflows and improve overall service quality.

- Support the center’s operations by ensuring all processes run smoothly and efficiently.

- Maintain communication in both English and Chinese for parents and team members.

Job Requirements:

- Proven experience in customer service and administrative roles.

- Excellent communication, organizational, and multitasking skills.

- Patience, empathy, and a passion for working with children.

- Strong interest in education, with a preference for candidates with related knowledge or experience.

- Ability to speak and write fluently in both English and Chinese.

- A collaborative team player with a positive attitude and willingness to help others.

What We Offer:

- Competitive salary and benefits package.

- Opportunities for career advancement in the education sector.

- Free Chinese language tutoring for your children.

- An engaging and supportive work environment with friendly colleagues.

Join Us:

If you are enthusiastic about education and want to contribute to shaping the future of students while developing your career, we welcome you to apply! This is an exciting opportunity to be part of a passionate team and make a meaningful difference.

How to Apply:

Send your resume and cover letter to [Insert contact details]. We look forward to meeting you and working together to create a brighter future!

• Position : Customer Service Executive – Up to $3,500 – Temasek Avenue
• Location : Temasek Avenue
• Working hours : 5 Days Work Week – Monday to Friday: 8.45 AM to 6.00 PM
• Salary (commensurate with experience) : Up to $3,500 + AWS + Performance Bonus + 14 Days Annual Leave + Medical Allowance (No Cap) + Dental (up to $300 per year) + Gym ($150 per month)
• Duration : Perm
• Industry : Shipping Services

Responsibilities:

• Monitoring all vessels loading status
• Maintain CBF/Booking Forecast Table. Update balance to load figures on daily basis
• Ensure all required documents, Portnet creation are duly completed before vessel closing time (including sending of final forecast and special container list to Partner/V0)
• Upload / Input booking / loading data into inhouse system
• Attend to customers enquiry and build close relationships with customers
• Rate quotation
• Need to work closely with other departments, particularly Sales and Trade to achieve maximum sales revenue.
• Any other duties as assigned

Requirements:

• Minimum Diploma in Logistics / Shipping / Transportation or equivalent
• Minimum 1 year of experience in in Container Shipping Industry
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Summary:

• Basic up to $2400
• Variable bonus available on a yearly basis
• Location: Islandwide
• 5.5 days work week
• Work timing depends on the outlets
• Staff meals & F&B discounts

Key Responsibilities:

• Greet and welcome customers in a friendly manner
• Provide customer service by taking orders and giving menu recommendations
• Set up the tables by topping up of condiments and other preparatory tasks
• Clear and reset the table for next guest
• Perform restaurant opening and closing duties
• Ensure all guests orders and requests are completed promptly and satisfactorily
• Perform other relevant ad-hoc duties as assigned by the Duty Manager

Key Requirements:

• Experience in F&B would be highly advantageous

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

What you will do:

The Systems Applications Engineer, National Accounts will Provides sales support to the engineering and sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Oversee the application engineering team, providing configuration, enhancement, and support for technical documentation and presentations to clients.
• Customize and introduce new features to Metasys software and in-house developed applications based on end-user requirements.
• Design and construct new applications tailored to meet customer specifications and needs.
• Guide application engineers in writing and executing tests on complex programming, troubleshooting issues as they arise, and supporting product launches.
• Provide technical support and troubleshoot application issues while performing tests on complex programming and assisting in product launches.
• Assist the application manager in process improvements to enhance productivity and efficiency.
• Collaborate with system integrators (SI) to monitor their performance with quality assurance/quality control checks and ensure completion sign-off.
• Manage vendor relationships, including scoping application services and reviewing deliverables.
• Collaborate as part of a design, engineering, and operations team.
• Knowledge of ACMV and controls associated with Johnson Controls Metasys will be advantageous.
• Deliver customer support by responding to technical queries with detailed analyses of building management systems, tooling costs, and design/process improvements to meet all customer needs.
• Collaborate with engineering, sales, and operations teams to understand standard fabrication techniques, composite materials, and customer demands to develop design details.
• Create and present technical engineering information based on customer proposals, including 3D representations of products and tooling.
• Prepare cost estimates by analyzing blueprints, customer documents, and consulting with engineers and technical personnel.
• Conduct conceptual designs of composite components and assemblies to support proposals.
• Generate accurate CAD models of components and assemblies.
• Develop detailed bills of materials for proposals.

What we look for:

• Bachelor's Degree in Engineering with a minimum of 5 years of relevant experience in Access, Intrusion, and Video Management systems
• Demonstrate strong verbal and written communication skills, including the ability to efficiently articulate technical subject matter
• Good communication skills, with an ability to express and understand complex technical concepts.
• Experience of working with globally distributed teams & matrixed environment

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Responsibilities:

• Handles the technical aspects of patch deployment and system updates.
• Ensures that patches are tested, scheduled, and deployed with minimal disruption to system availability.
• Responsible for testing patches in a controlled environment before deploying them to production systems.
• Verify that patches do not introduce new issues or conflicts.
• Regular scanning and analysis.
• Scheduled and controlled patch deployment.
• Perform risk-based prioritization.
• Rigorous testing in a controlled environment.
• Collaborate with customer’s IT team for user acceptance testing.
• Emergency response for critical vulnerabilities.
• Understand the customer’s infrastructure and become familiar with the Customer’s infrastructure environment and support processes and procedures to ensure supporting customer with proper SLAs.
• Troubleshoot production issues to fix any user related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Be available for customers’ questions in assisting their needs to support any issues and monitor customer’s environment leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.

The Individual and their Experience:

• Linux OS patching
• MySQL system and patching knowledge
• MSSQL system and patching knowledge
• Maria DB system and patching knowledge
• Eagerness and willingness to pick up & adapt new skills and automation.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernizing key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernization.

Logicalis Group has an annualized revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

Interested applicants please submit your application with your expected salary and notice period to be considered for the role.

We regret that only shortlisted candidates will be notified.

As part of any recruitment process, we collect and processes personal data relating to job applicants. We are committed to being transparent about how we collect and use that data and to meeting our data protection obligations. By applying to this post and sending us your resume, you agree to the collection, use and/or disclosure of your personal data in the manner as set out in our Data Protection Notice for Job Applicants which can be found

Logicalis is committed to protecting your privacy.

Click below to view the data protection notice.

https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf.