Key Responsibilities:

• Provide remote and on-site technical support, including but not limited to, Incident Management and Problem Management

• Escalate incidents, problems, changes to Team Lead, Service Delivery Manager, Account Manager or vendors as per defined business rules, ensuring timely resolution of client service requests

• Liaise with vendors needed to achieve incident and problem resolution.

• Maintain detailed knowledge of clients’ environments, where applicable, by maintaining and updating relevant documentation.

• Provide high levels of customer service and resolving problems/issues with the client in a constructive manner.

• Prepare adhoc reports as required for contractual requirements.

• Contribute to ITIL based processes to ensure successful delivery of services and initiate solutions to improve quality and productivity

• Participate in client presentations when necessary

Job Requirements:

• CCNP or CCIE in Enterprise is required

• Hands-on experience in installation, configuration and troubleshooting of Cisco routers, wireless or switches

• Have some working knowledge of Cisco Routers, Switches, SD-WAN, DNA, Wireless products in addition to Meraki Switch, Router, Wireless products

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines

• At least 3 years of experience in a technical support environment working with Cisco products

• Experience with VMWare NSX and VMWare Load balancers, is an added advantage

• Knowledge of Aruba, Bluecoat, Ironport, F5, Checkpoint, Fortigate or Juniper products is also preferred

• Able to work in a 24x7 and team environment

Job Description

· Contribute to high-quality research and development work in TCOMS laboratory through physical experiments including:

o design of scaled physical test models, such as maritime vessels, offshore rigs, marine renewable platforms, and aquaculture systems for testing in TCOMS Ocean Basin.

o generation of detailed design, production, assembly, and as-built drawings of test models.

o Structural assessment of the test models as well as other support to be used in the experimental setup.

o Work with a team of engineers and technicians on model fabrication and modification, calibration, instrumentation, and experimental setup.

o enhance the measurement of models’ behaviour and response by use of appropriate sensors like load cells or custom strain gauges.

o document design processes, methodologies, and results.

o contribute to process enhancements for improved efficiency of research work.

· Perform research in the following areas:

o Offshore hydrodynamics

o Coastal Protection

o Structural response and health monitoring of Marine & Offshore platforms and floating structures

o Fluid-structure interactions

· Collaborate with internal teams, affiliated research institutes and other relevant stakeholders in proposal preparation and submission.

· Any other duties as assigned by supervisor.

Job Requirements

· Bachelor’s/ Master’s Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Offshore Engineering, or other related disciplines.

· Preferably 3 years of relevant research/industry experience with competent knowledge in some of the following areas:

- Offshore engineering, marine engineering, marine structures, hydrodynamics, naval architecture.

· Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

- CAD software such as SolidWorks, Rhino, AutoCAD

- Engineering tools such as SESAM and ABAQUS

- Programming codes such as Python, MATLAB, or equivalent.

· Model experiments in wave flumes, wave tank or ocean basin.

· Good interpersonal and communications skills.

· Ability to adapt and work effectively as members of a team.

· Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

· Git Repository and Toolchain Management: Administer multiple Git repositories across different locations and develop automation toolchains using Python and scripting languages.

· Manage and Configure Firmware SDK: Oversee configuration management for firmware SDKs, ensuring modular design, code consistency, and automated testing prior to releases.

· Lead Automation and CI Integration: Implement and manage automation pipelines, particularly with Jenkins, and integrate CI solutions throughout the SDLC to enhance efficiency and automation.

Requirements:

· Bachelor’s degree or higher in Computer Engineering, Computer Science, Automation, or a related field.

· Proven experience in firmware SDK configuration management with a focus on best coding practices, such as clean and modular design, and automated testing prior to software/firmware releases.

· Strong expertise in managing Git repositories, including ensuring code consistency across two or more repositories hosted at different locations.

· Strong proficiency in:

o C: For firmware configuration management.

o Python: For managing Git repositories and creating toolchains.

o Scripting: Proficiency in batch, shell, or similar scripting languages.

· Comprehensive understanding of the SDLC and the ability to integrate CI solutions into each phase to achieve high levels of automation.

· Experience with cybersecurity and intellectual property protection, will be a significant advantage.

· Extensive hands-on experience with automation pipelines, particularly Jenkins.

Functional Competencies:

1. Perform review of marine construction, equipment of drawings / document according to applicable rules, regulations and delegations.
2. Communicate and work closely with internal and external stakeholders and ensure contract requirements are met.
3. Support and provide technical advice to clients.
4. Participate in meetings (both internal and external) as required.
5. Support Equipment & Material Certification team and Consultancy Services team in drawing review, inspection or consultancy work, as and when required.
6. Attend all scheduled trainings (locally and overseas) and ultimately achieving specified delegations as agreed in Performance Management Process.
7. Ensure timely and accurate submission of time & expense sheets.
8. Keep up to date with new rules, regulations and technical information or process disseminated through internal communication.

Requirements:

1. Degree qualified in Naval Architecture, Marine Engineering or equivalent with minimum 3 years relevant working experience on Marine and Offshore related field.
2. Minimum delegation level 1 within area of specialization: Hull, Machinery, Electrical / Automation, Safety, Stability / TLO.

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering center serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

Thales DIS Digital Payment business line is seeking a mobile developer for our successful Mobile payment product.

Thales DIS -Digital Payment offers a simplified digital experience solution for proximity payment and e-commerce, allowing banks and businesses to offer a multi-channel and multi-device payment experience. This sophisticated solution that involves multiple web services and clients, offers a single platform that provides ready-to-eat, easy-to-integrate services while ensuring best-in-class security.

Responsibilities:

• Participate in design, implementation, and validation of mobile SDK and application within the R&D project team structure in accordance with institutionalized processes and delivery standards
• Participate in the design and development of mobile SDKs
• Contribute to the improvement of existing technology platform/baseline and development methodology through prototyping and patent proposal
• Troubleshoot and SL3 support for our customers

Requirements:

• Degree in Information Security / Electrical/Electronics/Computer Engineering, or related fields.
• Strong knowledge of mobile development in Android, especially on relevant core platform technologies.
• Proficient in Java, Kotlin
• Around 8 years experience working with mobile technologies
• Proficient in native development is a plus
• Strong interest in mobile applications ecosystem
• Knowledge of OO design and programming skills
• Knowledge of unit testing and test automation
• Experience with continuous integration and build automation Jenkins and Gradle
• Motivated self-starter, strong logical, creative problem-solving skills and excellent analytical skills

Provide general adminstrative duties and clerical support

Filling and and organizing records, invoices, and other documentation

managing incoming and outgoing correspondence including phone calls, emails

input orders and data entry

generating delivery orders

tracking customer orders to ensure on-time collection or delivery of shipment

co-ordinating with customers on appointment

ad-hoc duties as and when assigned

team player and training provided

Main Responsibilities

Maintain and monitor complex clients’ systems:

• Responsible for technical support for complex systems and problems, ensuring performance of the asset (client) is maintained throughout the course of the contract
• Collate and evaluate statistical data related to the performance of the assets
• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

Manage responses to emergency situations:

• Facilitate responses to emergency situations and recovery activities
• Evaluate and provide fast resolution to critical field performance issues
• Visit sites to diagnose BBP operational issues and develop resolution plans for complex cases that cannot be easily resolved
• Review and approve recommended repair works for major equipment and system failures
• Check performance deviations and define root cause for any performance issues and to escalate to either Engineering or Performance team, as needed.

Provide oversight on maintenance work:

• Responsible for the planning of corrective, preventive and predictive maintenance activities to ensure BBP equipment and client systems are fully functional and in optimal operating condition, preserving BBP energy savings
• Optimise maintenance plans and schedules for inspection, testing, repair and predictive maintenance of equipment and systems to minimise downtime and costs
• Provide technical guidance on equipment and systems maintenance
• Endorse resourcing requirements to achieve operational state in accordance with BBP expectations
• Drive internal and subcontractor compliance with the health & safety standards and practices

Support Customer Support/Business Development teams in creating further business opportunities:

• Foster close collaboration with Customer support team to ensure client performance and satisfaction
• Advise customer support team to correct inefficient uses of energy, both technically and procedurally and to support with data justification
• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

Organise and develop the team:

• Coach and train Central Maintenance engineers
• Drive talent recruitment and development for the department in alignment with organisational strategy

Qualifications

• Diploma/Degree in Electrical or Mechanical Engineering, Controls, Energy or Environmental Engineering.
• Possess people management experience
• 2-5 years’ experience in an Energy or Mechanical Engineering is an added advantage
• Professional Energy/Sustainability related certification a plus
• Qualification in Refrigeration and Air-conditioning and Energy Management will be an added advantage
• Well versed with HVAC systems, basic knowledge, good understanding on ACMV system and equipment
• Ability to understand piping and ducting and to oversee installation of instrumentation works (power meters, temperature sensors, and pressure sensors).
• Strong written and oral communication skills for customer interaction and report writing
• A willingness to learn and work in a team environment with extensive contact with clients
• Strong communication skills with the ability to work autonomously
• Self-starter with strong analytical and troubleshooting skills
• High level of initiative with the ability to work under pressure and extended hours, if required to meet deadlines

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Key Responsibilities

• Take charge of facility MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Mechanical Engineering or related field.
• 300mm fab facility mechanical system operating experience, especially Exhaust / Chiller / PCW & Clean Room Systems.
• Good written and verbal communication skills in English.
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Overview

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
2. Maintain Equipment capability for production and meet production demand
3. Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
4. Engage in Equipment troubleshooting and production quality improvement.
5. Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality

Qualifications

1. Possess at least a Bachelor's Degree in engineering in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
2. Able to think critically with strong analytical skills
3. Possess good communication skills and time management skills
4. Prior leadership or competition experience in school activities will be an advantage
5. Must be willing to commit shift work
6. At least 2 years with relevant working experience in semiconductor industry foundry

Roles & Responsibilities:

1. Coordination with Construction team/ Design Consultant/PE/construction subcontractor, etc. for Detail Design Development.

2. Carry out detailed analysis and design of civil, structural, and geotechnical works.

3. Prepare design calculation reports and structural drawings for authorities' submissions.

4. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, shop drawing development.

5. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, Strutting, decking, etc.

6. Check/Rectification of all the structural drawing/ shop drawing if required

Requirements and relevant experience are as below:

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline from a recognized Institution.

2. Strong engineering fundamental and analytical skills in geotechnical and structural analysis and design works is an advantage.

3. Good knowledge of the application of design and drafting software.

4. Minimum 5 years of experience in Civil and Structural Engineering especially for LTA Project.

5. Be well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure.

6. Be well-aware of Underground Structure/Construction Sequences and related civil design works.

7. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards.

* Candidates who has experience as CS engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Fabrication of 2D materials based memristors using mask aligner, electron beam evaporator and shadow masks
• Characterization of 2D materials based memristors using a semi-automatic probe station, semiconductor parameter analyser.
• Characterization at the materials level using SEM, TEM, FIB, XPS, and Raman Spectroscopy.
• Other routinal paperwork related to the correct functioning of the group, including purchases, contract preparation and reimbursements.

Qualifications

• PhD in Materials Science and Engineering plus 3 years postdoc in memrsitors.
• Proficiency in using all the above mentioned machines
• Publications in top journals
• Fluent in English and Chinese language (including read/write) as the candidate is also expected to support applications for funding in collaboration with China (for example, with the NUS - Suzhou Research Institute).

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Integration diverse team of talent. You will be responsible to manage integration of all modules’ processes and the respective derivatives.

What you working on:

• To provide a leading role in the developing, transferring and maintaining of advanced CMOS fabrication technology with good process capability and high yield.
• Lead new technology transfer from mother fab or process development.
• Owner of new tapeout prototype lots and ensure 100% success rate.
• Drive process robustness improvement by providing root cause analysis and and collaborate improvement actions to meet 100% wafer acceptance test (WAT) Cpk goal & Baseline D0 target.
• Drive process excursion control by providing root cause analysis to modules and collaborate improvement actions to meet wafer acceptance test out of control % / out of specification % (WAT OOC%, OOS%) goal and single wafer low yield (SWLY) and single lot low yield (SLLY) goal.
• Collaborate with product engineer on product sensitivity related low yield and plan to do product specific process tuning to meet baseline D0 target
• Work with Customer Engineering to resolve customer complaints and provide customers with required information to meet customer concern and satisfaction & customer caution index (CCS & CCI) goal.
• Adhere to all FAB change management, safety & ISMS procedures
• Continuous improvement in d0, WAT performance, new tape-out (NTO) success and people efficiency.
• Ensure safety awareness
• Lead sub-team in x-functional continuous improvement projects.

More about you:

• Degree in Electrical/Electronics/Microelectronics/Material Science/Materials Engineering/Physics Engineering
• At least 2 years of relevant PI/Yield Engineering working experience in semiconductor manufacturing environment
• Strong understanding of device physics, advanced semiconductor process and SPC
• Strong analytical and problem solving skills to lead 8D team for corrective and performance actions
• Proficient in Microsoft business applications
• Proficiency in PROMIS system, Klarity ACE & DataPower will be an added advantage

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Job Overview
Do you enjoy solving riddles and have an inquisitive mind? Are you passionate about finding the source of a manufacturing process issue that causes a wafer yield breakthrough?

UMC is looking for a Defect Management (DM) Process Engineer to drive for Process Stability in defect reduction activities. You can pursue your passion in semiconductors engineering by utilizing cutting-edge and intelligent operating systems to assist with data analytics and inspection sampling strategy while staying under cycle time constraints. You will work closely with product and process owners to create and manage projects that address wafer and line yield issues.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line defect abnormality escalation, handling and disposition
• Render support in Production ramp-up, New process implementation and process characterization for project success
• Evaluate and implement productivity projects for DM Production, Tool and Cost index improvement
• Define and deploy inspection tool recipes BKM to ensure detection capability
• Assist in Customer audits on inspection strategy deployment and execution
  Perform baseline defect improvement

Qualifications

• Possess at least a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Able to think critically with strong investigating skills
• Possess good communication skills
• Possess good time management skills as well as a strong sense of commitment
• Prior leadership or competition experience in school activities will be an advantage
• Candidates with at least 2 years of relevant prior working experience

AIDRIVERS is paving the way to revolutionize mobility with advancing robotics and automotive technology in industrial applications making it; efficient, safer and smarter.

In this role, you will collaborate with our team of world-class engineers and researchers with diverse backgrounds in areas such as robotics, mechatronics and autonomous navigation software stack.

Responsibilities Includes:

• Awareness and knowledge of sensors, communication technologies, or control devices for various automation solutions

• Use of appropriate communication protocol such as Ethernet, CAN Bus and wireless

• Design, develop, or implement control logics or algorithms for electromechanical or pneumatic devices or systems

• Conduct studies to determine the feasibility and performance benefits of new mechatronic systems

• Calibrate sensors, automated systems, control systems, or system components to maximize efficiency of automation

• Consider safety, reliability and accuracy of the system at all times

• PLC programming for embedded logic programming

• Design Unit, Integration and Regression test cases

• Test commissioning and result documentation and reporting using appropriate means

Skill set required:

Essential:

• BSc/ Eng level or higher qualification or above in mechatronics engineering from a respected organisation

• 2+ years’ experience in the field.

• Experience and understanding of CAN, Ethernet and other communications technologies

• Experience of controller programming languages: structural or ladder logic

• Able to understand electrical systems and schematics

• Familiarity / working with sensors and sensor calibration

• Good English spoken and written skills

• Desire to learn and improve all the time

Desirable:

• Experience and working knowledge of automotive systems

• Experience / knowledge of hydraulic and pneumatic systems

• Experience of programming languages C, C++

• Experience IFM PLC

Job Capsule

In accordance with established policies, procedures and standards, is responsible for the activities related to an assigned organizational element, program, project or task. Will normally plan, conduct and supervise engineering design reviews and analysis assignments involving a major project or several smaller or less complex projects. These projects by nature of their complexity and difficulty require the fully competent application of conventional knowledge in a particular field of engineering or scientific field. Project work and assignments may be broad in nature requiring ingenuity and cross functional coordination.

Job Duties/Roles

1. Provides day-to-day leadership of Engineering staff assigned. Assigns projects to Engineers and monitors the progress of all assigned projects. Ensures the delivery of high quality service and maintenance of good customer relations.

2. Devises new approaches to problems encountered and makes recommendations for changes in methods, procedures or design where necessary.

3. Monitors the technical quality, content, consistency, continuity and timeliness of action of all assigned projects.

4. Applies intensive and diversified knowledge of engineering principles and practices in broad areas of technical responsibility. Performs engineering reviews and analyses when necessary. Reviews other engineers' work and provides appropriate guidance and training when necessary.

5. Participates in the development and changes of Rules. Advises assigned staff in matters related to the application of Rules and Regulations.

6. Prepares written response to clients in accordance with established procedures.

7. Maintains liaison with other engineering specialists internally and externally.

8. Monitors the performance, development potential and training needs of engineers assigned. Keeps management informed of manpower needs.

9. Develops or assists in the development of qualification statements, proposals, bids and other presentation materials.

10. Implements and maintains the ABS Health, Safety, Quality & Environmental Management Systems within assigned area of responsibility.

11. Prepares accurate billing to clients.

Knowledge, Skills and Abilities Required (KSAR)

1. Should have advanced practical industry related experience.

2. Knowledge of related technical disciplines.

3. Knowledge of applicable Rules and Regulations and impact of Rule applications and interpretations.

4. Knowledge of company business policies and procedures.

5. The human relations skills necessary to maintain positive client contacts and provide leadership and motivation to subordinate staff and peers.

6. Ability to effectively communicate orally and in writing.

7. Ability to identify, analyze and solve complex or unique engineering problems.

8. Ability to undertake short- and long-term planning to provide for efficient and effective scheduling of work assignments.

9. A working knowledge of the ABS Health, Safety, Quality & Environmental Management Systems (internal candidates only).

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

Are you curious about the advancement of technology that enable millions of devices to be created on a single silicon chip the size of your finger? Are you pursuing to become a wafer fabrication expert in a fully integrated process chain? Look no further as UMC Process Integration Engineer position is the perfect fit for you.

UMC Singapore is expanding its production capacity and will build the first 22-nanometer production line in 'Garden City' Singapore. We are looking for Process Integration Engineer to maintain customer production by ensuring stable wafer quality and on-time wafer delivery through process integration and daily management. This position provides excellent opportunities for growth and development.

Responsibilities

• Introduce customer's new product to FAB and support in new product's tape out procedures to ensure pilot success.
• Improve new Product yield and ensure mass production inline, WAT and CP yield stable
• Define standard operation procedure for daily job
• Co-work with module engineers to solve production related issues. (inline, WAT, yield and reliability...)
• Co-work with module engineers to develop customized process to meet customer special requirement

Qualifications

• Possess at least a bachelor's degree in Electronic Engineering, Electrical Electronic Engineering, Physics, Material Science
• Study in specialized in wafer chip or related semiconductor course
• Possess good communication skills
• Possess good time management skills as well as a strong sense of commitment
• Semiconductor device process engineer background is preferred
• Semiconductor foundry experiences is preferred

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• 1-2 years of experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• At least a minimum of 5 years of relevant experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior / Associate Engineer to be part of our Thin Film diverse team of talent. You will support the running of Production and ensure equipment readiness and worthiness for production.

What you will be working on:

• To assist Thin Film equipment engineers to sustain equipment performance and perform schedule & adhoc preventive maintenance related activities to achieve operation goals
• Perform 12-hour shift duties to support the running of Production and ensure equipment readiness and worthiness for production
• Ensure good PM quality and PM success rate for good Uptime
• Planning of Daily PM schedule for negotiations with Manufacturing
• Maintain good 6s in work environment before and after PM
• Parts ownership to ensure sufficient parts for basic Preventive Maintenance Activities
• Troubleshoot and resolve Issues encountered during PM
• Assist Duty Engineers in Sustaining the line and recovery of Tool Alarms and parts change
• Assist new crews on their On-The-Job-Training (OJT) by acting as their buddy
• Provide Hands on Training for New PM Crew
• Lead/Participate in Continuous Improvement projects to meet Company Objectives

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics
• 1-2 years’ experience in frontend semiconductor manufacturing environment.
• Some knowledge in Microsoft Office applications
• Able to perform 12-hour rotating shift
• Good ability and experience working in a multi-cultural environment
• Clear and concise presentation skills
• Team Player
• Strong sense of responsibility and Positive learning attitude

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Summary

This position is accountable for preparing the detailed Construction plans in accordance with the JGCAP’s company policies as the key person under the direction by JGCAP’s Site In-charge/ Project Manager and coordinating all construction activities on site among all JGCAP’s disciplines including subcontractors using his technical experiences and construction know-how and ensuring the completion of the work on schedule.

The detail plans as described above are as follows:

• Execution formation with the direction by JGCAP’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with JGCAP’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the JGCAP’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Candidate with vast experience is also encouraged to apply.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Interested parties, please send in your detailed resume.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Minimum Viable Product Studio (MVP Studio) of NUS Enterprise, Technology Transfer and Innovation, supports NUS startups in their prototyping journey by providing industry know-how and technical guidance in the productization of intellectual property. We are seeking a versatile mechanical design engineer with market-proven expertise in product design and development, to join our team as a Master Engineer (Mechanical Design).

As a Master Engineer (Mechanical Design), you will guide NUS startups through the mechanical design and development process. You will support the prototyping phase of NUS startups, including generating mechanical concept proposals and mechanical architecture, implementing detailed design using 3D modelling and 2D drawings, and ensuring full design integration at system level. You will collaborate closely with internal cross-functional teams and external vendors to deliver robust mechanical design solutions.

Duties and Responsibilities

Prototype Design & Development

• Generate mechanical concepts and provide mechanical architecture.
• Implement detailed design utilizing 3D modelling and 2D detailed drawings.
• Establish modular design and full product BOM structure.
• Create sub-assembly test plans and test reports.
• Ensure design robustness and full design integration at system level
• Collaborate with ID to implement human-centric styling solutions for mechanical designs.

Technical Advisor to NUS Startups for Mechanical Design & Development

• ​​​​​​​Facilitate startups in prototyping their mechanical designs.
• Provide technical guidance and design expertise throughout the development lifecycle.
• Collaborate effectively with internal team members, startups, NUS faculty members.
• Communicate technical concepts and solutions to non-technical team members and stakeholders.

Vendor Management

• Work with vendors on DFM for the required mechanical designs.
• Coordinate with vendors to ensure delivery timelines and quality standards are met.

Qualifications

• Bachelor’s degree/ Master’s degree in Mechanical Engineering.
• Market-proven mechanical 3D design experience in consumer products, automotive/industrial products, or medtech/healthtech instrumentation, with at least 12-15 years’ combined experience.
• Proficient in 3D CAD modelling, preferably in Pro-Engineer/Creo and Solidworks.
• Experience in casting, plastics molding, sheet metal design, and 3D printing.
• Advance geometrical dimensioning and tolerancing.
• Good knowledge in automation and mechanism design.
• CFD/flow simulation in analyzing flow/thermal characteristics.
• Completed and led at least 5 complete product design life cycle.
• Good knowledge in control systems.
• Strong troubleshooting skills at module and system levels.
• Proven team manager with excellent teamwork and collaboration skills, with the ability to mentor and guide startup teams

Job Description

-Contribute to high-quality research and development work in TCOMS laboratory through physical experiments including:

o design of scaled physical test models, such as maritime vessels, offshore rigs, marine renewable platforms, and aquaculture systems for testing in TCOMS Ocean Basin.

o generation of detailed design, production, assembly, and as-built drawings of test models.

o Work with a team of engineers and technicians on model fabrication and modification, calibration, instrumentation, and experimental setup.

o enhance the measurement of models? behaviour and response by use of appropriate sensors.

o document design processes, methodologies, and results.

o contribute to process enhancements for improved efficiency of research work.

-Perform research in the following areas:

o Offshore hydrodynamics

o Coastal Protection

o Loads, motions and response analysis of Marine & Offshore platforms and floating structures

o Fluid-structure interactions

· Collaborate with internal teams, affiliated research institutes and other relevant stakeholders in proposal preparation and submission.

-Any other duties as assigned by supervisor.

Job Requirements

-Bachelor's/Master's Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Offshore Engineering, or other related disciplines.

-Preferably 3 years of relevant research/industry experience with competent knowledge in some of the following areas:

o Offshore engineering, marine engineering, hydrodynamics, naval architecture.

-Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

o CAD software such as SolidWorks, Rhino, AutoCAD

o Engineering tools such as WAMIT, SESAM and OrcaFlex

o Programming codes such as Python, MATLAB, or equivalent.

o StarCCM+, OpenFOAM

-Model experiments in wave flumes, wave tank or ocean basin.

-Good interpersonal and communications skills.

-Ability to adapt and work effectively as members of a team.

-Good command of written and spoken language.

-Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.