Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide coaching, guidance, feedback and training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics
• Min 3 years of relevant work experience in Etch Process or BEOL
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Summary:

• Provide 1st and 2nd Level IT Support to end-users
• Manage IT assets through procurement, tracking, maintenance, refresh /renewal and disposal/ termination.
• Provide assistance in the implementation of new end-user computing technologies.

Job Scope:

• Design, deploy, and manage security solutions such as firewalls, IDS/IPS, and encryption technologies.
• Conduct security audits, compliance checks such as vulnerability assessments with risk analysis
• Development and enforcement of security policies, procedures and controls
• Integrate security measures into new and existing IT systems and applications.
• Ensure that applications are securely configured, including hardening default settings, securing APIs, and restricting file permissions.
• Conduct initial investigations of security violations/incidents, and escalate as necessary
• Collaborate with other IT teams to ensure security is integrated across all systems and processes.
• Stay updated on the latest security trends & technologies
• Design, deploy, and manage security solutions such as firewalls, IDS/IPS, and encryption technologies.
• Work with other contractors where required for delivery of network services
• Any other IT duties as assigned.

Special Aptitude And Knowledge

• Advanced technical knowledge of security technologies and systems.
• Expertise in firewall administration, encryption technologies, and network protocols.
• Experience in designing and implementing security architectures.
• Proficiency in vulnerability assessment tools and penetration testing methodologies.
• Able to communicate well, handle documentation and explaining network and IT architecture
• A great team player and able to work well with other team member

Qualification

• Recognized Degree in Information Technology, Computer/ Network Engineering or equivalent.
• Possess relevant certifications such as CISSP, CCSP, CEH, or advanced security certifications
• Minimum 5 years of experience in an equivalent role.
• Experience with a company that has achieved CyberTrust Mark certification or has actively worked towards it is a bonus.
• Familiarity with implementing security measures in the healthcare industry is also advantageous.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on improving tool performance and availability, in charge if maintenance, diagnosing failures and implementing effective solutions to meet uptime and cycle time requirements in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD); or Physical Vapor Deposition.

Key Responsibilities

• Maintain equipment performance in cleanroom environment for quality production.
• Handle on-duty tasks and conduct fundamental alarm troubleshooting; identify root cause and problem-solve critical equipment issues with urgency
• Install and qualify new tool sets on schedule to increase capacity promptly
• Continually improve tool uptime availability, drive defect reduction and enhance hardware capability
• Develop defense and monitoring system to prevent equipment failure or performance lost.
• Analyze complex data sets and derive actionable insights to optimize equipment parameters and controls
• Actively collaborate with equipment suppliers and partners to identify tool deficiencies; develop, evaluate, and validate corrective and preventive solutions

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Outbound Customer Service Executive

1 year contract, potential to renew

Come and join us!

Do you wish to work in a world-class organization trying your hands at something you have dreamt of doing?

“FIND YOUR PLACE” by joining a world-class MNC Healthcare company

Get an opportunity to explore new technology, learn new skills, enjoy the diverse and open culture, engagement and care, flexible working model, career opportunities, competitive salary and bonus, and endless amenities and benefits.

Company Description:

Our client is an MNC Healthcare company. As a focused healthcare company, with expertise in Innovative Medicine and MedTech, they are empowered to tackle the world’s toughest health challenges, innovate through science and technology, and transform patient care.

Job Purpose:

Outbound Customer Service will be responsible for overseeing all franchise order processing of outbound deliveries, managing exceptions related to outbound deliveries and providing all the necessary details and analysis related to outbound shipments to affiliates.

1. Outbound Management

• To Provide timely Outbound delivery to 3PL (third-party logistics) to facilitate Goods Issue.
• Communication for not available items during outbound delivery creation.
• Manage exceptions related to outbound delivery execution at 3PL, as per agreed procedure and approvals.
• Data validation and recording of all the Outbound raised by 3PL.
• Preparation and circulation of Outbound related dashboard as per agreed timelines.
• Backorder management: open requirement which cannot be serviced during delivery creation, will fall under backorder processing. Outbound analyst to manage Backorder processing as per defined procedure.
• Communication related to Backorder management and Outbound processing to relevant stakeholders.
• Prioritization and scheduling of Outbound deliveries for optimized order to border lead time
• for affiliates
• Stop-shipment coordination for Traceability and various analysis

2. Customer complaint resolution:

• Handling of Customer complaints: communication with affiliates and 3PL, complaints
• closure with help of 3PL.
• Record of Credit/debit notes, if any, for affiliate returns

3. Back up for Outbound Analyst

Authorities:

• PO (purchase order) processing process in Ariba

Qualification:

• Preferably Diploma in related field.
• Minimum 1 year experience in Customer service/ Data management.
• Supply chain related educational qualifications and work experience will be preferred.

Technical Skills:

• Excellent analytical ability
• Customer (internal and external) driven approach.
• Good skills in Microsoft Excel and Microsoft PowerPoint.
• Candidates with system Knowledge (SAP/ databases/ Business Intelligence tools) will be preferred
• Mastering complexity: Autonomy, Managing complexity/technical accountability.
• Scheduling and prioritization.
• Result Orientation

Interested parties, please apply through this link https://jnj-apac.talent-pool.com/projects OR click on APPLY button.

Alternatively, you can share your CV at [email protected]

EA License: 94C3609

Reg No: R1440247

Help connect with those in need! You will be part of a team in a contact centre environment. Step-by-step guidance and support will be provided for you to handle the call management system and how to communicate with the clients.

Key Responsibilities

• Conduct telephone engagements in a timely manner, check-in and assess our clients who are seniors if there’s any changes to their health and social circumstances, identifying their needs and providing the right information.
• Identify and escalate cases to senior colleagues.
• Maintain a professional level of care and service.
• Conduct administrative tasks and ensure client needs are followed through.

Key Requirements

• Minimum GCE ‘N’ Level qualifications.
• 1-year of contact centre / eldercare experience an advantage.
• Good telephone etiquette and customer service skills.
• Basic level of English language skills (verbal/written).
• Proficient in Mandarin/Chinese language to communicate with seniors who are not conversant in English.
• Good computer skills, able to handle in-house call management system.
• Able to handle 12-hour shift work (2 days work, 2 days rest).

Job requirement:

• Ability to perform first level investigation out of control situation and line excursions, abnormal lot/tool judgement due to inline OOC and OOS from SPC Chart.
• Process condition optimization.
• Work closely with equipment and production to ensure key module objectives are met.
• Evaluation to improve process margin.
• Cost reduction projects.
• Ensure safety, discipline and housekeeping compliance by all personnel.
• Analyze different types of defects and provide clear problem description with maintenance counterparts on troubleshooting.

Job requirement:

• Diploma in Electrical/Electronics/Chemistry/Microelectronics/Engineering or equivalent.
• Relevant working experience in Photo Process semiconductor front-end industry
• Willing to work in cleanroom environment.
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Objective:

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Job Description:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Min 3 years of relevant work experience as Engineer in Diffusion Wet Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Summary

The OT Cyber Security Engineers is working in billion-dollar scale projects to safely and securely deliver the Digitalisation Strategy for our FPSO Facilities. Digital innovation requires operational technology (OT) systems to interact more and more with information technology (IT) systems. With the convergence of OT and IT Systems and network components comes increased Cyber security threats requiring focused attention and management.

You will be focusing on implementing and maintaining a defence in depth security posture and securely connecting previously isolated Systems and Equipment within OT networks to the Enterprise IT environment.

Additionally, to the OT integration piece, you will assist with the development and sustainment of robust processes and methodologies for data handling, which in-turn assists the management of tactical and strategic interactions between Technology & Autonomy and other business units across the organization.

MODEC is a part of the Mitsui Group, with 5000+ employees from 25 countries. Following the successful launch of digital capability in Brazil (https://www.modec.com/news/2020/20200115_pr_MV29-Lighthouse.html), our Singapore office commenced building digital team and promote Digital Transformation in 2021. You will work in this new “start-up” team in the professional, multinational work environment.

Our Singapore office occupies the top floors of The Metropolis Tower building, which provides scenic views of the city, and is located right next to the Buona Vista MRT station.

Responsibilities In EPCI Project

• Advocate, integrate and improve on existing technology change management process.
• Focal Point for Project related OT Cyber Security matters
• Research, design, and implements cyber security solutions for OT systems and products
• Contribute to Project Cyber Security Detailed Risk Assessment/s
• Establish and define Cyber Security Requirement Specification/s for FPSO Project’s
• Provide Cyber Security and Network Engineering requirements to Contractors, Vendors and suppliers
• Review and verify Contractors/Vendors/Suppliers design and deliveries
• Assist with Scoping, Development and Management of OT projects.
• Assist with Hardware Lifecycle planning and standardization.
• Liaising with key stakeholders
• Participates in project design reviews to ensure consistency with required business outcomes.

In Digital & Analytics Department

• Contribute to relevant Company policies/strategies/philosophies
• Analyse Operation Technology (OT) and Information Technology (IT) networks for opportunities to improve integration, network architecture and security.
• Provide architectural advice and oversight and input into selected Operational Application implementation projects
• Design, document and deliver technical Cyber Security solutions for OT within company and client enterprise architectures.
• Communicate effectively with, and between the immediate team, business subject matter experts, developers, analysts, engineers, end users of systems and management.
• Assists in responding to audits, penetration tests and vulnerability assessments

Key Skills

Domain Expertise – can be flexible

• Broad understanding of Technology Infrastructure and Applications that support FPSO Operations.
• Excellent communication skills with a strong technology focus.
• Ability to understand complex and detailed business processes.
• Bachelor’s or Master’s degree in relevant field of Engineering (With a strong knowledge of Industrial Automation Systems and Operational Technology)
• Understanding of Cyber Security standards (IEC, ISO, NIST or equivalent). Certified competencies highly regarded.
• Understanding of Network design and infrastructure used in both OT and IT realms
• Understanding of Industrial Communications protocols
• Understanding of Operational Challenges for Integrating and managing OT systems
• Understanding of Virtualisation, Server equipment and SAN Solutions (either in Use, Management or Design)
• Strong knowledge of common vulnerabilities and exploitation techniques
• Technical knowledge in Industrial network security; For example, firewall configuration, network monitoring, intrusion detection, etc.
• Strong problem-solving and trouble-shooting skills
• Good knowledge of System’s Engineering approaches, tools and their application

Individual Skills

• Has the ability to interface with, and gain the respect of, stakeholders at all levels and roles in the company
• Is a confident, energetic self-starter, with strong interpersonal skills
• Has good judgment, a sense of urgency and has demonstrated commitment to high standards of ethics, regulatory compliance, customer service and business integrity
• Instinctive and creative
• Self-motivated and possessing of a high sense of urgency and personal integrity
• Highest ethical standards and values

Ref ID: JT

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

SIA-NUS Digital Aviation Lab at the National University of Singapore (NUS) offers an exciting opportunity for a highly motivated Research Engineer (UX Designer/Researcher) within Work Package 4. The work package focuses on developing innovations in the following key strategic areas related to passengers’ inflight experience, mainly in Enhancements to SIA’s Cabin Seat Product Offerings, Novel Features for SIA’s Next Generation Aircraft Cabins for Sleep Improvement and Pushing SIA’s Superior Customer Experience to New Heights with an Advanced Connected Cabin.

The duties and responsibilities for this role includes working collaboratively with a multi-disciplinary team to develop and execute strategies that ensure the successful delivery of project goals outlined in the brief. As a UX Designer, you will be responsible fin supporting the team in developing innovative, desirable, and feasible design solutions and concepts that meet the business needs while bringing customer experiences to greater heights. One of the key role is to conduct research and develop new framework and strategies in new area of interest as identified by the PI.

As a UX Designer/Researcher, your key responsibility will be:

• Support the development of current and new projects.
• Conduct research and develop frameworks in new topics of interest as identify by the PI.
• Develop strategies such as probes, workshops, or teaching platforms to test and develop these frameworks.
• Conduct probes, workshops and teaching activities above.
• Data collections
• Assist PI in collating research material for communication and publication.
• Assist in conducting studies and experiments when necessary.

Requirements

The university values courage and creative, openness and engagement, inclusion and diversity, and respect and integrity. As such, we see the importance of recruiting talent aligned to those values and are looking for a suitable candidate who has:

• Bachelor’s degree in industrial Design, Design, Anthropology, Psychology, Sociology or related disciplines.
• Possess excellent interpersonal and communication skills.
• Strong organizational skills. Ability to manage projects with various stakeholders.
• Am comfortable in working within a self-directed culture and navigating ambiguity.
• Previously worked in projects related to delivering better customer experience or UI/UX experience is a plus.
• Proficient with prototyping software such as Figma, Adobe XD. Ability to CAD and handle 3D prototype is a bonus.
• Ability to conduct secondary research. Ability to analyze and syntheses research materials.
• Good writing and presentation skills.
• Openness to critique from other disciplines.
• Have empathy and curiosity for how great brands, businesses and organization navigate innovation and design.
• Experience with unique and novel research tools, methods of uncovering key insights, and proposing of new concepts.

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Develop advanced video/image analytics technologies using both Computer Vision Algorithms and advanced ML/DNN
• Research technologies and concepts in the areas of Machine Learning, Computer Vision and Edge AI
• Participate in system design activities, prototyping and testing
• Follow and contribute to software development best practices

Qualifications

• At least a Bachelor’s Degree in Data Science, Computer Science, Engineering or similar
• Experience in developing Computer Vision applications, i.e. object detection & classification, object segmentation, computer vision algorithms, ML models optimization, etc.
• Experience with ML/DNN in at least one of the following frameworks: TensorRT, Tensorflow, Keras, PyTorch
• At least 2 years of experience with C++

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Experience:

• Computer vision: 3 years (Required)

Work Location: In person

Job description:

As a member of the filter design team, the successful candidate will play a key design role as a product owner of resonator/filter in development and commercialization of acoustic filters with both BAW and SAW technologies from beginning, concept meeting to end, mass production including characterization.

Experience with either SAW or BAW filter design -layout, simulation, fabrication, and characterization- is required for senior position and principal position is available for candidates with proven track record in ramping up commercialization of acoustics filters in mass production environment.

Responsibilities:

- Co-work with international team across China and Singapore on a cross-disciplinary team basis

- Use commercial circuit analysis and physical modelling tools as well as custom software packages to design and analyse acoustic filters

- Assist RF measurement analysis by generating test plans and analysing results

- Produce RF engineering reports to support team members

- Communicate with R&D team for co-design and device improvement

Qualifications/Desired skills:

- Track record in design and mass-production of SAW/BAW filters for mobile applications is highly desirable

- Strong skills and working knowledge of design simulation tools, e.g. ADS, AWR, HFSS, COMSOL, etc

- Understanding of RF test parameters and test equipment

- Understanding of filter application and mobile communication system and architecture

- Experience with drawing programs, schematic capture and PCB layout tools

- Experience in RFIC design, RF module and front-end system design is preferred

- Knowledge of MEMS fabrication

- Strong written and verbal English skills to support complex analysis

- Organized team player and a good learner who is open to discussions

Job Description:

• Manage team of the site supervisors
• Appointed by QP(S) to be full time on site carrying out the duties of the QP(S)’s roles and responsibilities as required by BCA
• Site supervision/inspection of construction works
• Liaise with all parties involved in the project
• Monitor and ensure all works carried out as per specification/approved construction drawings
• Maintain & control site records as per BCA requirement
• Attend site meeting with Authority's Representative and Authority's Appointed Consultant project staff and assist in preparation of the meeting minutes and presentation with Station experience is required.

Job Requirements:

• Minimum eight (8) years of post-graduate experience as a civil engineer, of which at least three (4) years of experience in heavy civil/ structural engineering works. Experience in Station will be required.
• Degree in Civil Engineering recognised by the PE Board and qualification accredited by Joint Accreditation Committee of IES/ACES as Qualified Site Supervisor as defined under the Building Control Act.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Degree or diploma in Civil Engineering or project management.

Please email your CV to: [email protected]

Our business:

Professional Engineer (PE Civil)

1. PE endorsement for any temp works

2. PE endorsement for wall hacking, submission to HDB/MCST;

3. Building structure crack/safety assessment

4. Scaffolding/shoring/formwork design

5. ECM design and submission to PUB / QECP inspection to site

6. A&A work design and submission to URA/BCA/HDB/LTA/JTC

7. SCDF submission for shop / factory partition works

8. LTA prompt submission for road opening;

9. PUB POWS submission

10. PUB Form B1 endorsement for sewer connection

11. SCDF FSC02 form endorsement.

12. HDB SED 054M form endorsement.

13. Project management

14. Design for Safety (DfSP) Services

15. Building structural inspection (PSI) to BCA requirements

16. Façade inspection to BCA requirements

17. Earth returning structure design and submission (ERSS)

M & E Work (PE Mechanical)

18. Design and PE endorsement to piping / ducting support

19. Design and PE endorsement to piping trenching excavation work

20. Endorsement to FSC02 form

21. Mechanical PE work

Geotechnical Consultancy

22. Deep Excavation

23. Slope Protection

24. Soil Improvement

25. Foundation Design

26. Soil Interpretation Report

Others

27. Land Survey

28. Pre-con survey

29. Technical clearance to Npark, PUB, LTA, JTC etc.

30. Traffic diversion design, LTA prompt submission

31. Design for Safety Professional (DfSP)

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

As a Senior Frontend (Full Stack) Engineer, you will be responsible for designing, developing, and maintaining our data product suite. You will work closely with cross-functional teams including data scientists, data engineers, and UX/UI developers to create scalable, robust, and user-friendly applications. Your expertise in both front-end and back-end development will be crucial in implementing innovative features and ensuring seamless integration between different components of our data products. This role requires strong problemsolving skills, a deep understanding of data processing and visualization techniques, and a passion for delivering high-quality software solutions.

Responsibilities

• Collaborate with product owner, data scientists, data engineers and designers to understand product requirements and translate them into technical specifications.
• Design and develop full-stack solutions, including user interfaces, APIs, data processing and storage.
• Implement data visualization components using modern front-end frameworks and libraries.
• Develop scalable and efficient back-end services to handle data from multiple data source with complex business logic.
• Optimize application performance and ensure high availability and reliability.
• Conduct code reviews, ensure seamless deployment and testing of the data products and provide constructive feedback.
• Stay updated with the latest industry trends and best practices in full-stack development, data engineering, and data visualization.
• Troubleshoot and resolve issues reported by users, ensuring a smooth user experience.
• Continuously improve software development processes and contribute to the overall technical excellence of the team

• Bachelor's or master's degree in Computer Science, Software Engineering, or a related field.
• 5+ years of professional experience as a Full Stack Engineer, with a focus on datadriven applications.
• Strong proficiency in JavaScript, HTML, CSS, and modern front-end frameworks (e.g., React is preferred as we use React in our team).
• Expertise in server-side programming languages such as Node.js, Python or Java.
• In-depth knowledge of databases and SQL, with experience in designing and optimizing data models.
• Familiarity with data processing frameworks (e.g., Apache Spark) and big data technologies (e.g., Kafka) is a plus.
• Solid understanding of RESTful APIs and microservices architecture.
• Experience with cloud platforms (e.g., Azure, AWS) and containerization technologies (e.g., Docker, Kubernetes).
• Proficiency in version control systems (e.g., Git)
• Excellent problem-solving skills and the ability to debug complex issues in a distributed system.
• Strong communication skills and the ability to work effectively in a collaborative team environment.
• Prior experience working on data products or analytics platforms is highly desirable.

COMPANY DESCRIPTION

As the world's leading owner and operator of LPG carriers with five decades of operating experience, BW LPG promotes competitive, sustainable solutions to secure value for society and our stakeholders.

Our global footprint spans seven countries with 17 nationalities represented across our workforce. Our fleet of 39 Very Large Gas Carriers (VLGC) offer a total carrying capacity of over 3 million CBM. From spot voyages and time charters to Contracts of Affreightments (CoAs), our emphasis on flexible, reliable service has earned the trust of leading oil companies as well as trading and utility companies. More information about BW LPG can be found at www.bwlpg.com.

BW LPG is associated with BW Group, a leading global maritime company involved in shipping, floating infrastructure, deepwater oil & gas production, and new sustainable technologies. Founded in 1955 by Sir YK Pao, BW controls a fleet of over 490 vessels transporting oil, gas and dry commodities, with its 200 LNG and LPG ships constituting the largest gas fleet in the world. In the renewables space, the group has investments in solar, wind, batteries, biofuels and water treatment. BW LPG, as a member of the BW Group, is one of Forbes World's Best Employers 2023.

RESPONSIBILITIES

Summary:

The Senior Data Engineer has a role focusing on building our modern Lakehouse including owning pipeline development, data modeling and governance within a cross-functional team responsible for the end-to-end delivery of data products and analytics solutions.Additionally creating CI/CD pipelines for automated deployments and monitoring, and enforce data quality checks, ensuring data consistency, reliability, and compliance.

Key Responsibilities:

Working with Product Owners, Business Analysts and Data Analysts to ensure business requirements are translated into data solutions, deliver accurate and reliable datasets that enable impactful analytics and dashboards.

They collaborate with System Analysts and the Business to understand the business logic and data lifecycle within our systems and inform our solution design with a goal of balancing scalability and performance.

Skills:

• Collaboration and Communication Skills: Excels at working in a team to align data solutions with business needs, focused on creative problem-solving in a fast-paced environment.
• Analytical Thinking & Communication: Strong skills in analyzing and translating data-driven insights and requirements to both technical and non-technical stakeholders.
• Spark & Azure Databricks: Proficiency in designing and implementing data pipelines to support reliable data ingestion and transformation using Databricks and Spark.
• Data Modeling Expertise: Advanced SQL and Python skills for complex queries and data modeling, enabling efficient data access and transformation.
• CI/CD Pipeline Creation: Experience in creating CI/CD pipelines, enabling automated testing, validation, and deployment of data pipelines models using GitHub and GitHub Actions with Databricks.
• Infrastructure as Code: Experience in automating cloud infrastructure management for consistent deployment and scaling using tools like Terraform.

• 5+ Years in Data Engineering: Proven experience building and maintaining data infrastructure, with a deep understanding of data engineering principles and best practices.
• Agile Mindset and Experience: Thrives in Agile Environments, with a strong resilience, adaptability and responsiveness to change in fast-paced settings.

The position will be based in Singapore.

Only shortlisted candidates will be notified.

Job Description

· Collaborate with cross-functional teams such as Mechanical Engineers, Test Engineers, Lab Technicians, and Project Engineers to execute ocean basin model testing projects, such as floating offshore wind projects.

· Analyse and comprehend project requirements related to hydrodynamic testing, model instrumentation, and data acquisition.

· Select and implement suitable data acquisition systems, control system design, and develop software architecture specific to ocean model testing needs.

· Develop and maintain application software for new ocean basin test setups and custom test requirements.

· Upgrade existing software systems to accommodate new test protocols or methodologies for ocean model testing.

· Choose appropriate sensors for wave, current, and motion measurements, ensuring seamless integration with control systems and software.

· Create and update documentation, including software designs, changes, user manuals, and standard operating procedures (SOPs) for ocean model tests.

· Upgrade LabVIEW-based software applications to newer versions, ensuring they meet the latest testing requirements.

· Troubleshoot and resolve issues in control systems, data acquisition, and software during model testing.

· Test and validate application software before deployment to the ocean basin test setup.

· Prepare comprehensive user manuals, SOPs, and provide training for test engineers to ensure smooth operation of the test environment.

Job Requirements

· Minimum qualification: Bachelor of Engineering (BEng) / Bachelor of Technology (BTech) in Electronics, Electrical, Instrumentation, or Computer Science with at least 2 years of relevant experience, particularly in LabVIEW.

· Proficiency in different versions of LabVIEW, including the latest versions with relevant toolkits.

· Experience in designing and developing NI LabVIEW-based data acquisition and control systems for ocean basin model testing or similar environments.

· Proven ability to develop modular and scalable applications using LabVIEW?s standard architecture.

· Experience in developing LabVIEW applications for Windows and Real-Time (RT) Linux environments.

· Proficiency in integrating NI hardware systems such as PXI, cRIO, and CompactDAQ into the testing framework.

· Hands-on experience with communication protocols like TCP/IP, UDP, Serial, USB, CAN, and EtherCAT for testing and control purposes.

· Experience with integrating third-party programmable instruments (e.g., multimeters, power supplies, oscilloscopes) and controllers into ocean testing setups.

· Experience in developing NI software drivers for third-party hardware and integrating third-party software with LabVIEW.

· Knowledge in selecting, wiring, and troubleshooting sensors used in hydrodynamic and ocean model testing (e.g., pressure sensors, accelerometers, flow meters).

· Experience in reading control panel schematics, designing control systems, and selecting appropriate control panel hardware for model testing.

· Strong team player with the ability to work independently and collaborate in cross-functional project teams.

· Experience interfacing induction motors with VFDs and control systems, with knowledge of VFD configuration for use in testing environments.

· Strong troubleshooting skills at the signal and system level for data acquisition and automated test systems.

· Excellent documentation skills for capturing test requirements, preparing software designs, and writing user manuals.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities

• Responsible for internal and external excursion management (MRB or Quality Claims)
• In-charge of customer data reporting
• Conduct quality related training
• Support customer survey and audits
• Responsible for continuous improvement activities
• Other Adhoc duties assigned

Requirements

• Degree in Engineering or Science
• Min. 2 years relevant working experience is required
• Systematic and analytical problem-solving skills
• Proactive and Multi-tasking
• Good communication skills and a good team player
• Proficient in Microsoft Office
• Good working knowledge in Statistical Process Control (SPC) and Statistical techniques is preferably
• Auditing experience is an added advantage
• Understanding of system flow and database is an added advantage

Key Responsibilities:

• Provide remote and on-site technical support, including but not limited to, Incident Management and Problem Management

• Escalate incidents, problems, changes to Team Lead, Service Delivery Manager, Account Manager or vendors as per defined business rules, ensuring timely resolution of client service requests

• Liaise with vendors needed to achieve incident and problem resolution.

• Maintain detailed knowledge of clients’ environments, where applicable, by maintaining and updating relevant documentation.

• Provide high levels of customer service and resolving problems/issues with the client in a constructive manner.

• Prepare adhoc reports as required for contractual requirements.

• Contribute to ITIL based processes to ensure successful delivery of services and initiate solutions to improve quality and productivity

• Participate in client presentations when necessary

Job Requirements:

• CCNP or CCIE in Enterprise is required

• Hands-on experience in installation, configuration and troubleshooting of Cisco routers, wireless or switches

• Have some working knowledge of Cisco Routers, Switches, SD-WAN, DNA, Wireless products in addition to Meraki Switch, Router, Wireless products

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines

• At least 3 years of experience in a technical support environment working with Cisco products

• Experience with VMWare NSX and VMWare Load balancers, is an added advantage

• Knowledge of Aruba, Bluecoat, Ironport, F5, Checkpoint, Fortigate or Juniper products is also preferred

• Able to work in a 24x7 and team environment

As a Cloud DevOps Engineer, you will run and support the company’s software application infrastructure in the cloud, ensuring the optimized use of resources to scale.

What will you do

• Design, develop, and implement cloud infrastructure as code using Terraform.
• Manage and optimize cloud resources for cost-efficiency and performance.
• Secure infrastructure by implementing best practices and adhering to security compliance standards.
• Implement robust monitoring and alerting systems for infrastructure resources.
• Collaborate with developers and operations teams to integrate infrastructure changes seamlessly into the software development lifecycle.
• Champion DevOps best practices for cloud infrastructure management.
• Setup, monitor and support CI/CD pipeline on premise or in the cloud.
• Stay up to date on the latest AWS services and Terraform features.

What do we expect

• Proven experience as a DevOps Engineer with at least 3 years of experience (with a focus on AWS cloud infrastructure).
• Implementation proficiency in service control policy and account governance (Control Tower, OU management, etc.).
• Enable and configure AWS VPC flow logs, load balancer logging, direct connect, AWS VPN, TGX etc.
• Experience managing Unix/Linux environments.
• Extensive experience in scripting in languages such as Python/Ruby/Perl and shell scripting.
• In-depth knowledge and experience with AWS services (EC2, S3, VPC, IAM, etc.).
• Expert-level proficiency in Terraform, including writing reusable modules and leveraging best practices.
• Able to troubleshoot infrastructure issues in cloud, identify root cause and implementation improvement and fixes.
• Good knowledge of microservices architecture, container technologies (Docker, Kubernetes).
• Expertise in Git and GitOps philosophy.
• Good people skills, teamwork, collaboration with cross function and cross-geo teams.
• Self-motivated, willing to learn new technologies continuously.
• Maintain documentation for design, integration, testing, and deployment.

Good to have

Relevant DevOps certifications (e.g. AWS).

Some experience with other cloud providers like Azure and GCP.

Experience with CI/CD pipelines and integrating infrastructure provisioning with development workflows.

Knowledge on mobile and web applications development.

Knowledge of big data and data analytics infrastructure in cloud.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

As a Senior Frontend (Full Stack) Engineer, you will be responsible for designing, developing, and maintaining our data product suite. You will work closely with cross-functional teams including data scientists, data engineers, and UX/UI developers to create scalable, robust, and user-friendly applications. Your expertise in both front-end and back-end development will be crucial in implementing innovative features and ensuring seamless integration between different components of our data products. This role requires strong problemsolving skills, a deep understanding of data processing and visualization techniques, and a passion for delivering high-quality software solutions.

Responsibilities

• Collaborate with product owner, data scientists, data engineers and designers to understand product requirements and translate them into technical specifications.
• Design and develop full-stack solutions, including user interfaces, APIs, data processing and storage.
• Implement data visualization components using modern front-end frameworks and libraries.
• Develop scalable and efficient back-end services to handle data from multiple data source with complex business logic.
• Optimize application performance and ensure high availability and reliability.
• Conduct code reviews, ensure seamless deployment and testing of the data products and provide constructive feedback.
• Stay updated with the latest industry trends and best practices in full-stack development, data engineering, and data visualization.
• Troubleshoot and resolve issues reported by users, ensuring a smooth user experience.
• Continuously improve software development processes and contribute to the overall technical excellence of the team

• Bachelor's or master's degree in Computer Science, Software Engineering, or a related field.
• 5+ years of professional experience as a Full Stack Engineer, with a focus on datadriven applications.
• Strong proficiency in JavaScript, HTML, CSS, and modern front-end frameworks (e.g., React is preferred as we use React in our team).
• Expertise in server-side programming languages such as Node.js, Python or Java.
• In-depth knowledge of databases and SQL, with experience in designing and optimizing data models.
• Familiarity with data processing frameworks (e.g., Apache Spark) and big data technologies (e.g., Kafka) is a plus.
• Solid understanding of RESTful APIs and microservices architecture.
• Experience with cloud platforms (e.g., Azure, AWS) and containerization technologies (e.g., Docker, Kubernetes).
• Proficiency in version control systems (e.g., Git)
• Excellent problem-solving skills and the ability to debug complex issues in a distributed system.
• Strong communication skills and the ability to work effectively in a collaborative team environment.
• Prior experience working on data products or analytics platforms is highly desirable.

Responsibilities

• Internal and external excursion management (MRB / Quality Claims)
• Customer data reporting
• Conduct Quality related training
• Support customer survey and audits
• Continuous improvement activities

Requirements

• Degree in Engineering or Science
• Minimum 2 years relevant experience
• Systematic and analytical problem-solving skills
• Proactive and Multi-tasking
• Good communication skills and a team player
• Auditing experience is a plus
• Good working knowledge in Statistical Process Control (SPC) and Statistical techniques is a plus
• Understanding of system flow and database; basic IT knowledge is a plus

As a Software Engineer (C++ / C#), you will be a critical team member and fully responsible for developing graphics components for our products. In this role, you will work closely with product managers, UI-UX designers and the R&D team to collaboratively solve real-world problems.

What will you do

• Design, build and maintain efficient and reliable software modules for Screening Eagle software products.
• Develop tools for real-time interactive 3D graphics applications.
• Assist other team members to implement next generation NDT solutions.
• Collaborate with team members to integrate the components to desktop, mobile and web platforms end products.

What do we expect

• BA/MA/MS/PhD degree in Computer Science, Computer Graphics, or strong experience in 3D Games / 3D experiences.
• Proficiency in C++11 and above.
• Proficiency in C# and Unity.
• Good understanding of software design patterns.
• Good knowledge of data structures and algorithms for OOP.
• Good understanding of memory management in non-garbage collected environments.
• Familiar with memory and CPU usage optimization.
• Familiar with 3D graphics pipelines and optimization techniques.
• Solid linear algebra knowledge.Experience in developing for and integrating third party software on desktop, mobile and web tech stacks.

Main Responsibilities

Maintain and monitor complex clients’ systems:

• Responsible for technical support for complex systems and problems, ensuring performance of the asset (client) is maintained throughout the course of the contract
• Collate and evaluate statistical data related to the performance of the assets
• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

Manage responses to emergency situations:

• Facilitate responses to emergency situations and recovery activities
• Evaluate and provide fast resolution to critical field performance issues
• Visit sites to diagnose BBP operational issues and develop resolution plans for complex cases that cannot be easily resolved
• Review and approve recommended repair works for major equipment and system failures
• Check performance deviations and define root cause for any performance issues and to escalate to either Engineering or Performance team, as needed.

Provide oversight on maintenance work:

• Responsible for the planning of corrective, preventive and predictive maintenance activities to ensure BBP equipment and client systems are fully functional and in optimal operating condition, preserving BBP energy savings
• Optimise maintenance plans and schedules for inspection, testing, repair and predictive maintenance of equipment and systems to minimise downtime and costs
• Provide technical guidance on equipment and systems maintenance
• Endorse resourcing requirements to achieve operational state in accordance with BBP expectations
• Drive internal and subcontractor compliance with the health & safety standards and practices

Support Customer Support/Business Development teams in creating further business opportunities:

• Foster close collaboration with Customer support team to ensure client performance and satisfaction
• Advise customer support team to correct inefficient uses of energy, both technically and procedurally and to support with data justification
• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

Organise and develop the team:

• Coach and train Central Maintenance engineers
• Drive talent recruitment and development for the department in alignment with organisational strategy

Qualifications

• Diploma/Degree in Electrical or Mechanical Engineering, Controls, Energy or Environmental Engineering.
• Possess people management experience
• 2-5 years’ experience in an Energy or Mechanical Engineering is an added advantage
• Professional Energy/Sustainability related certification a plus
• Qualification in Refrigeration and Air-conditioning and Energy Management will be an added advantage
• Well versed with HVAC systems, basic knowledge, good understanding on ACMV system and equipment
• Ability to understand piping and ducting and to oversee installation of instrumentation works (power meters, temperature sensors, and pressure sensors).
• Strong written and oral communication skills for customer interaction and report writing
• A willingness to learn and work in a team environment with extensive contact with clients
• Strong communication skills with the ability to work autonomously
• Self-starter with strong analytical and troubleshooting skills
• High level of initiative with the ability to work under pressure and extended hours, if required to meet deadlines