Installation, commissioning and modification of marine switch boards and systems

Breaker calibration and testing.

Handling projects as requested by ship yard.

Testing and servicing of devices listed below

Gauges as well as transmitters for Temperature and pressure (VDO).

Safety devices for generators such as over current protection relays, reverse power protection relays (Omron, DEIF, and Crompton).

Panels such as engine alarm panel, fire alarm panel and bilge alarm panel.

Electrical instruments such as Voltmeter, ammeter, frequency meter, power factor meter & kilo wattmeter (DEIF, & selco).

Switchgears (Mitsubishi, Terasaki, Merlin gerin, & Siemens).

Testing, trouble shooting and upgrading the following panels

Diesel and shaft Generators(Caterpillar and Cummins)

Main and emergency switch boards

Generator set control panels

Fire detection system

Tank alarm system

Cranes

Navigation lights

Motors

Starters including variable drives and soft starter.

We transform Industrial Waste into Metals, Minerals, Specialty Chemicals and Energy.

We are seeking spirited Individuals with high positive energy levels. Happy Individuals with a passion for the

Environment and Sustainability. Individuals that want to make a difference. You must be a resourceful problem solver, with excellent people skills. To be part of our Green engineering team to maintain our High Temperature Incinerator, and Industrial Waste Water Treatment System for Hazardous Waste, and Waste Plastic to Oil Conversion.

• Candidate must possess at least Diploma in Engineering (Industrial, Mechanical, Mechatronic/Electromechanical, Electrical) or equivalent.
• At least 3 Year(s) of working experience in active preventive maintenance.
• Familiar with pumps, motors, control panels, piping, elevtricals wiring.
• Preferably with a specialise skill such as Welding, Pneumatics, Hydraulics, Piping, Instrumentation & Controls etc.
• Certifications in Safety and/or other specialities
• Handle a team of technicians

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering(Civil) or equivalen.
• At least 2 years(s) of working experience in the related field is required for this position.
• Required Skill(s): Understand drawing, Quantity take off, Prepare BQ, Familiar with costing, Supplier sourcing, Contract administration.
• Preferably Senior Executive specialized in Engineering-Civil/Construction/Structural or equivalent.
• Familar with structural steelworks.
• Other QS duties as assigned from time to time.

Job Description

• Identify and evaluate problems / root cause of process inefficiency.
• Identify and source for the potential improvement method to improve process efficiency (Safety, Quality, Cost, Delivery and Environmental).
• Lead Project Team (Engineers and Technicians) on process improvement and development activities assigned.
• Develop process digitization concepts and drive big-data analytics for process knowledge improvement.
• Work closely with relevant departments for process improvement and breakthrough projects.
• Present and manage project progress, cost and completion deadline according to schedule.
• Any ad-hoc duties as assigned.

Job Requirements

• Degree in Metallurgy, Materials Science / Engineering, or equivalent with more than 3 years of relevant experience (Experience in Steel / Aluminum metallurgy and Heat Treatment is preferred).
• Diploma in the above-mentioned fields with more than 6 years of relevant experience.
• Knowledge of manufacturing processes and IIOT solution deployment is preferred.
• Preferably Sound knowledge in Process Improvement Methodology.
• Willing to travel; Willing to station 3-12 months in other countries subjected to project requirements.

JOB HIGHLIGHTS

· Cutting Edge Internet-of-Things and AI Technologies

· Open Source and Maker Culture

· Friendly Working Environment

JOB DESCRIPTION

· Realtek is one of the leading fabless semiconductor design companies in the world, with this position, you will get to play a role in value-add to the latest Realtek wireless communication IC product line.

· You will develop software and firmware for the state-of-the-art Internet-of-Things microcontrollers, writing tools, automation, and build systems.

· You will also work closely with the hardware, driver, test, and marketing team to be exposed to the entire product designing cycle.

· You will have the chance to prototype your ideas and make them public through social media, workshops, and events.

· You will be able to follow the latest tech trend and learn new skills when working with cutting-edge technologies.

ROLES & RESPONSIBILITIES

· Be a part of a team that maintains, implements, and validates embedded software for Realtek's latest IoT SoCs

· Design application-level middleware to simplify the customer development process

· Port new features, capabilities, and platforms to Realtek IoT SoCs

· Prototype innovative IoT applications using various network protocols, tools, and open source software

· Debug and fix peripheral, wireless connectivity(Bluetooth, Wi-Fi, etc.), and network-level issues

· Collaborate with third parties for hardware and software projects (ARM, SeeedStudio, Sparkfun, Adafruit, AI-Thinker...)

· Online & offline event organization with groups, institutes, and local universities

· Content creation and social media marketing strategy based on Realtek IoT solutions

· Community management and customer support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electrical Engineering, or other related majors

· Fresh graduates are welcome to apply

· Experience with C/C++ and a scripting language(Python/Bash/etc.) is a must

· Experience with embedded system drivers, peripherals, computer networks, wireless connectivities, and open source development platforms (Arduino, PlatformIO, etc.)

· Experience with TinyML and/or AIoT-related development is a bonus

· Experience with video editing and content creation

· Willingness to learn new technologies and ability to follow the latest software and electronics trend

· Good Communication and Teamwork Skills

Digital Trust Centre (DTC) is looking for a candidate to join them as a Research Engineer II.

Key Responsibilities:

• Conduct cutting-edge research in large language models, translating theoretical algorithms, frameworks, and methodologies into practical, working prototypes that demonstrate potential product applications.
• Collaborate closely with researchers and engineers to design and implement system architectures and software solutions that transition research findings into scalable, deployable products.
• Develop and build tools and frameworks to facilitate the transfer of LLM capabilities to industry partners, showcasing the practical value and impact of the research outcomes.
• Create and maintain comprehensive technical documentation, including white papers, presentations, and tutorials, to disseminate knowledge to a broader audience and enhance overall expertise in these emerging areas.
• Engage with international research communities and partners to stay abreast of the latest advancements in machine unlearning, contributing to discussions, collaborations, and initiatives that elevate Singapore’s position in the global AI and privacy research landscape.

Job Requirements:

• Minimum Masters’s degree in computer science/ engineering or related fields.
• Proficiency in Python is a must. Experience with other programming languages such as Java, C/C++, or Go, and frameworks like PyTorch or TensorFlow, is highly advantageous.
• Experience in developing and deploying machine learning models, particularly in natural language processing (NLP) and large language models (LLMs), including tasks such as data preprocessing, feature extraction, model training, and evaluation.
• Strong knowledge of machine learning and deep learning techniques, including knowledge graphs, machine unlearning, and AI testing.
• Proficiency in working with common Linux distributions (e.g., Ubuntu, CentOS) and familiarity with shell scripting and command-line tools.
• Experience with cloud platforms (AWS, GCP, Azure) and containerization technologies (Docker, Kubernetes) is a must.
• Experience with version control systems (e.g., Git) and collaborative development tools.
• Experience in developing ML systems from end to end, including data exploration, feature engineering, model training/evaluation will be advantageous.
• Ability to communicate complex technical concepts effectively to both technical and non-technical stakeholders, bridging the gap between research and practical application.
• Strong analytical and problem-solving skills, with a focus on developing innovative solutions for LLMs.
• Self-motivated and able to work independently, managing multiple tasks and projects in a fast-paced environment.
• Strong collaborative skills, with experience working in cross-functional teams.
• Keen attention to detail and commitment to high-quality deliverables.
• Understanding of ethical considerations and best practices in AI research, particularly concerning data privacy and security.
• Ability to code-switch effortlessly between talking business and talking tech, and can help stakeholders, engineers, and businesses easily understand difficult research tech concepts.
• Experience in AI model testing methodologies, including robustness, fairness, and explainability assessments, as well as understanding data privacy and security considerations in AI.
• Good understanding of relational database and Unix shell scripting skills.

We regret to inform that only shortlisted candidates will be notified.

Do you want to be part of the team that revolutionizes the resource exploration and navigation industry? Atomionics is working on quantum sensors based on cold atom interferometry where atoms are cooled down to almost absolute zero using lasers. At such cold temperatures, these atoms start behaving like waves, which allows us to precisely measure the forces acting on them.

This opens up a wide range of applications including, but not limited to, paving a path in the energy transition to zero-carbon, exponentially improving the performance of inertial navigation systems, and transforming the global positioning system. At Atomionics, you will get the chance to prototype, test, refine, finalize, and produce your designs toward making our devices compact and robust for field deployment with the only constraints being power and your imagination.

We are looking for an electronics engineer who:

1. Wants the freedom to innovate by being involved in deep tech research
2. Is excited by the prospect of working within an interdisciplinary team comprised of mechanical engineers, physicists, and software engineers
3. Would like to own their work via compelling equity offerings

We are a small, focused group in a high-energy environment. Our team consists of people at the top of their domains with a diverse set of experience, such as in advanced rocket engines, the first digital cameras, and high-resolution microscopes, apart from cold atom physics. In addition, we are backed by some fantastic investors from the private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other prominent angels.

Responsibilities

• Lead project development from hardware specifications, manufacturing methods and procedures, and manufacturing quality
• Design architecture to manage size, weight, and power of cold atom sensors to target specifications
• Propose new innovative solutions and technology

Must have skills

• Analog and digital design
• Microcontroller/microprocessor and FPGA based design, interface SPI, I2C, RS232, Parallel, USB, CAN, and SATA
• Schematic capture and PCB design layout
• Prototyping and debugging of boards
• Strong interest in and passion for technology

Nice to have skills

• Knowledgeable in RF test methodologies of RF modules and the use of RF test equipment
• Knowledgeable in solid-state and fiber-based lasers
• Knowledgeable in high power switching power supply and battery management
• Leads and owns projects
• Expertise in emerging technologies

JOB DESCRIPTION

· Define the architecture and design specification for in house video encoder and decoder, according to market requirement.

· Make assessment of the video encoder quality, either in house design or licensed IP.

· Work with IC design team to resolve the issues during design phase.

· Create test plan for the video encoder and decoder and qualify the design.

· Work with software team to develop the driver for the video encoder and decoder.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with IC design background

· Familiar with video compression technology, such as MPEG4, H264, H265, MPEG5, etc.

· Familiar with video quality assessment.

· Familiar with video encoding algorithm and video decoding compliance test.

· Familiar with architecture of video encoder and decoder RTL design.

· Knowledge in video/image pre and post processing is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

JOB DESCRIPTION

· Understand the product requirement and create SOC system level architecture according to the requirement.

· Understand the use case and create system level test plan.

· Define design specification for new hardware modules, together with IC design engineer.

· Work with IC design engineers to resolve the issues during design phase and qualify the design.

· Understand the design specification of existing hardware modules and make improvement.

· Perform FPGA validation before tape out and silicon verification after tape out

· Provide support for any issue reported from customer.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with firmware development experience Familiar with SOC design, including bus architecture, memory sub-system, video signal processing, etc.

· Familiar with standard peripherals, such as UART, I2C, SPI, I2S, PWM, SD, flash controller, etc

· Familiar with IC design activities, such as RTL coding, timing analysis, etc.

· Familiar with lab equipment

· Knowledge in WIFI/Bluetooth physical layer or MAC operation is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

VFlowTech is excited to offer a PhD scholarship under the Industrial Postgraduate Programme, a fully funded initiative by the Singapore Economic Development Board and Enterprise Singapore. This program provides aspiring researchers with the opportunity to address critical challenges in Vanadium Redox Flow Battery technology, focusing on mitigating shunt currents, reducing losses, and enhancing system reliability and efficiency. Candidates will be full-time employees of VFlowTech while pursuing their PhD at Newcastle University (UK).

The research project aims to develop a hybrid energy storage system (HESS) by integrating flow battery and lithium-ion battery technologies into a single microgrid solution. The candidate will contribute to hardware development and advanced control algorithm creation, optimizing performance, efficiency, and reliability. This prestigious program offers a unique opportunity to drive innovation in energy storage systems.

Key Responsibilities:

1) Design and Simulation of Hybrid Energy Storage System (HESS):

• Determine suitable battery chemistries and sizes for the HESS.
  • Conduct simulation tests and analyze initial results to ensure optimal design and functionality.

2) Development and testing of HESS Hardware:

• Implement and integrate the simulated HESS design into the physical hardware.
  • Conduct intensive testing and validation of the HESS prototype to ensure performance standards are met.

3) Development of Energy MAnagement System (EMS) Algorithm:

• Develop a hybrid EMS to control and optimize the use of both battery technologies.
  • Implement smart charge and discharge control logic to enhance system efficiency, reliability, safety, cost-effectiveness, lifespan, and overall power and energy density.
  • Utilize state-of-the-art AI techniques to develop advanced EMS algorithms for efficient energy management.

Qualifications:

- Academic Background:

• An Undergraduate or master’s degree in electrical engineering, Power Electronics, Energy Systems, or closely related field.
  • Strong academic record and research experience in relevant areas.

- Technical Skills:

• Proficiency in power electronics and energy storage system design.
  • Experience with battery management systems (BMS) and energy management systems (EMS).
  • Familiarity with simulation software and tools used in power and energy systems.

- Research and Development:

• Demonstrated experience in designing, simulating, and testing energy storage systems.
• Ability to conduct independent research and develop innovative solutions to complex problems.
  • Strong analytical and problem-solving skills.

- Soft Skills:

• Excellent written and verbal communication skills.
  • Ability to work collaboratively in a multidisciplinary team.
  • Strong organizational and project management skills.

Benefits:

• Opportunity to work on a pioneering project with significant real-world applications.
• Access to state-of-the-art research facilities and resources.
• Collaboration with leading experts in the field of energy storage and power electronics.
• Competitive salary and funding for research-related expenses.
• Work and earn a PhD degree simultaneously with no tuition fee.

Application Process:

Interested candidates should submit the following documents:

• A detailed CV highlighting relevant experience and skills.
• A cover letter explaining your motivation for applying and your research interests.
• Academic transcripts and certificates.
• Contact information for at least two academic or professional references.

Deadline:

Applications will be reviewed on a rolling basis until the position is filled. Early applications are encourage.

Contact:

For further information or to submit your application, please contact: h[email protected] and [email protected]

Join us in advancing the future of energy storage technology and making a significant impact on the efficiency and reliability of micro-grid systems!

The EOS/ASE Geodesy Group at NTU is searching for a Research Engineer II to work under the supervision of Prof Emma Hill on the role of tectonics in modifying regional relative sea level (RSL). The successful candidate will analyse geodetic data and conduct numerical modelling to estimate RSL related to past and future earthquakes and other processes of land-height change in Southeast Asia.

Further to this, they will work on projects aimed at effective communication of these results to policymakers and other stakeholders. They will investigate best practices for communicating probabilistic estimates of potential future impacts of earthquakes on RSL. The successful candidate will have a Bachelors’ degree in Earth Science, natural hazards, remote sensing, geodesy, computer science, data science, or a related subject. Most importantly they will have enthusiasm to engage in the research work of our group, and a passion for making Southeast Asia a safer and more sustainable place for all communities in the region.

Key Responsibilities:

• Analyze and interpret geodetic and remote sensing data from regional observing networks and satellites to further our understanding of land-height change in Southeast Asia.
• Conduct numerical modeling of tectonic processes, including to use numerical modeling techniques to model deformation resulting from viscoelastic deformation of the Earth’s asthenosphere.
• Conduct probabilistic analysis for potential future impacts of earthquakes on RSL.
• Conduct studies into best practices for communication of results on RSL from tectonics to policymakers and other key stakeholders, including discussion with these groups to learn their needs.

Job Requirements:

• Bachelor’s degree in Earth or environmental science.
• At least 4 years of experience working in an Earth science field.
• Demonstrated experience in geodetic data analysis and numerical modelling of tectonic deformation.
• Demonstrated experience conducting scientific research.
• Demonstrated ability to write and present at the level of peer-reviewed scientific journals and international conferences, which will usually be in English.
• Collaborative mindset and strong teamwork skills.
• Evidence of lead authorship of papers submitted or accepted into peer-reviewed journals would be a plus.

EOS seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status and family responsibilities, or disability. Interested applicants should submit a CV and a statement of interests. Evaluation of application starts immediately until the position is filled. We regret to inform that only shortlisted candidates will be notified.

To apply, please submit a CV, cover letter, statement of research interests, and the names of three referees.

We regret to inform that only shortlisted candidates will be notified.

Job Highlights

• Lunch & Company Transport Provided(i.e., Lakeside,Boon Lay & Woodlands)
• Attractive Bonus Scheme
• 5 days’ work week(i.e., 8.30am to 5.30pm)

Job Responsibilities:

• To carry out and execute all daily jobs received from customers and ensure that all information is relayed down to the respective Operations Teams at the end of the day
• To perform billing and ensure the accuracy of the invoices raised
• To perform data entry into the respective systems in an accurate and timely manner
• To attend to customers’ requests or calls in a timely and professional manner
• To perform filing when the job is completed
• To ensure that all complaints/feedbacks received from customers are escalated to the Customer Service Lead, as well as any other matters which needs to be known by the Customer Service Lead
• To provide the necessary training and guidance to his/her assigned buddy
• To do up any reports as and when assigned to by the Customer
• To assist in extracting of information as and when required
• To verify contractor’s invoices as and when required
• To co-ordinate with external parties/approved contractors and ensure jobs are carried out per instructions
• Acquire a thorough understanding of key customer needs and requirements
• Develop SOPs for major clients and ensure necessary training materials being disseminated to relevant parties
• To assist in sending out quotations if assigned by Account Manager or Customer Service Manager and escalate to Account Manager or Customer Service Manager when in doubt
• To assist the Lead for any tasks assigned to from time to time

Key Competencies(Logistics Service)

• Well verse in handling and managing Transportation, Coordination with operations team, License/Bonded/DG Warehouse Inventory and activities.
• Able to co-ordinate well with Singapore Customs on any related matters
• Meticulous and experience in different type of permit declaration – License/Bonded/DG clearance permit declarations.

Job Requirements:

• GCE ‘O’ Level or relevant education qualifications
• Entry-level/no working experience are welcome to apply and training will be provided
• Possess knowledge of procedures and relevant systems to carry out daily jobs with ease
• Possess good communication skills to ensure that customers and internal stakeholders
• Attentive and detail-orientated
• Able to work under stress and pressure
• Good teamwork and problem-solving skills

Benefits:

• Daily Lunch Provided
• Company Transport Provided at designated MRT stations (Lakeside, Boon Lay & Woodlands)
• Medical and Dental benefits
• Attractive Bonus Scheme (AWS, Special Bonus etc.)

SERVICE TECHNICIAN (5 Day / West)

Job Type : Full-Time

• Travel Opportunity
• Training Provided
• 5 Days Work Week

Responsibilities :

• Have a passion to carry out trouble-shooting and maintenance works.
• Love the satisfaction after solving difficult machines.
• Willing to do hands-on work
• Willing to do brazing work
• Any other adhoc duties as assigned

Requirements :

• Candidate must possess at least Secondary School / "O" Level, Professional Certificate / NiTEC, Diploma / Advanced / Higher / Graduate Diploma in Engineering (Industrial), Engineering (Mechanical), Engineering (Mechatronic / Electromechanical) or equivalent.
• Required Language(s) : English
• Required Skill(s) : Aircon, Refrigeration, Chiller, Mechanical, Vacuum Pumps, Water Pumps, Scrubbers or Chillers.
• Able to travel on short notice
• Possess valid driving license (optional)
• Only Singaporean / SPR / Malaysian may apply.

Interested candidates who wish to apply for the advertised position, please send to us your resume via APPLY NOW

Email : [email protected]

We regret that only shortlisted candidates will be notified.

• Support customer inquiries and troubleshoot complaints via various means (Emails/ Calls/ WA) in a timely manner
• Understand & explain company’s product and provide appropriate recommendations
• Provide prices and prepare quotes for customers
• Update and maintain accurate records of customer interactions / databases
• Proactively monitor customer’s orders and resolve issues before it becomes critical
• Work collaboratively with other departments to deliver customer’s request(s)
• Build, maintain good relationship with our customers and suppliers and ensure high customer satisfaction

Job Requirements:

• Excellent communication and interpersonal skills (Able to speak proficiently in different language)
• Strong problem-solving and analytical skills
• Ability to work independently and as part of a team

Customer Service Specialist

Job Responsibilities:

• Key focal point in coordinating customer’s logistical needs and interfacing with operation.
• Good understanding of customer’s business model and operational program.
• Attain good knowledge of the terminal's infrastructure and facilities.
• Maintain a high-quality service level to all parties.
• Manage the customer’s expectations.
• Handle customer’s complaints or inquiries.
• Responsible for the planning, scheduling and co-ordinate daily activities for all customers with optimization and anticipation.
• Orders creation for executing operations into the stock accounting system.
• Communicate effectively with the Operations Department
• Monitor the progress of activities and the completion time to ensure and efficient planning of the next operation.
• Attend to changes and amendments required by customers (including after office hours).
• Attend to and troubleshoot issues or problems raised by Operations (including after office hours).
• Assist with any re-documentation.
• Prepare picking list.
• Prepares updates and monitors stock and orders in the system.
• Co-ordinates the daily operations activities
• Monitors the arrival and collection of shipment and liaises with forwarder on any late or delayed arrival and collection.
• Ensure data integrity for all inventory transactions updated in the system.
• Liaison between clients and warehouse staff on all goods receipts and goods release.
• Arranging and monitoring of goods collection and delivery.
• Perform system inventory reconciliation, weekly cycle count and stock-take.
• Ensure relevant documents are generated for all updates of activities and rates in the system
• Troubleshoot root causes for any inventory variances and assist in the formulation of appropriate preventive actions
• Prompt response to queries and ensure proper follow-up for any outstanding queries
• Assist in the investigations of service issues and ensure actions are undertaken to close off all issues with customers.
• Proactively seek improvement opportunities to improve current operations which can enhance the order processing turn-around time
• Compliance with ISO, GMP/GDP Guidelines
• Ensure the team adhered to ISO procedures, local authority regulatory guidelines on Good Manufacturing Practice (GMP) / Good Distribution Practice (GDP) as well as the client's Regional Quality System in Inventory Management
• Any other tasks/projects assigned by the immediate manager.

Invoicing

• Assist with weekly and monthly invoice generation
• Assist with generating and checking the accuracy of invoicing report
• On-time Administration of Billing and Reporting to customers

Reporting

• Assist with generating required monthly KPI reports
• Assist with Customers' weekly and monthly reporting
• Perform reporting of Key-Performance Indexes (KPIs) accurately and on-time

• Consulting with mechanics regarding necessary repairs and possible alternatives to expensive repairs.
• Using your knowledge of our products and services to sell or provide in-depth information about available parts and service options to customers.
• Answering questions about service outcomes and scheduling and booking appointments, vehicle drop-off, and vehicle pick-up.
• Providing customers with information and advice on warranty protections, potential cost savings, and the advantages of trading in versus fixing their car.
• Managing and overseeing the dealership's workflow and schedule.
• Calling customers to advise them about service changes or car pick-up times.
• Maintaining positive customer relationships to ensure repeat business.
• Ensuring all details on services rendered and costs are related to customers and processing their payments.
• Provide Excellent Customer Service by attending to drivers’ complaint as per feedback emails from drivers’ dialogue
• Compiles workshop monthly KPIs performance reports with submission to all projects.
• Conducts monthly meeting with our sub-contractor to review contractual performance
• Attends all projects’ co-ordination meeting to present monthly workshop KPIs and discuss on taxi issues
• Liaising with service technicians about parts ordering and ensuring parts are available when needed.

Requirements:

• An associate's Degree in Mechanical or a related field may be advantageous.
• Experience in the automotive field may be advantageous.
• A strong understanding of automotive technology and the automotive industry.
• Proficiency with industry-specific software.
• Excellent customer service, interpersonal, and communication skills.
• Strong organizational, decision making, and problem-solving skills.
• The ability to communicate with mechanics, customers, and management.
• 6 Days work ( Monday to Saturday)
• Work location : Jurong West
• Working Hour : 7:30 am – 5:15 pm
• Shift work required

Job Scope:

- Support customer inquiries and troubleshoot complaints via various means (Emails/ Calls/ WA) in a timely manner
- Schedule arrangement for after sale servicing works & follow up through reminder calls or email
- Review the service/maintenance reports and verify all findings, risks and recommendations
- Respond to customer inquiries on repairs, spare parts, and other services
- Offering and sales of repairs, retrofits & spare parts
- Provide prices and prepare quotes for customers
- Update and maintain accurate records of customer interactions / databases
- Proactively monitor customer’s orders and resolve issues before it becomes critical
- Work collaboratively with other internal departments to deliver customer’s request(s)
- Build, maintain good relationship with our customers to ensure high customer satisfaction

Job Requirements:

- Excellent communication and interpersonal skills (Able to speak proficiently in different language)
- Strong problem-solving and analytical skills
- Ability to work independently and as part of a team

• Up to S$2.2K Basic+OT pay+shift allowances+gd perks!
• Good company to work for / Transport provided for late/night shifts!
• Many vacancies! / Immed Start! / S$5K Joining Bonus!

Our client is a one of the largest aviation MNC.

Responsibilities:

• Oversee and lead a team in managing daily operations, making final decisions on matters of importance to ensure a positive passenger experience and satisfaction.
• Guide, develop, motivate, and mentor both new and existing staff, maintaining the highest service, grooming, and discipline standards.
• Ensure compliance with safety, security, and standard operating procedures of the company, airlines, and airport authorities.
• Additionally, assist the Duty Manager in daily deployment based on agreed service standards with the airlines and airport authorities.

Requirements:

• Diploma in any disciplines.
• Has customer service related experience in airlines operations
• Able to work on rotating shift (6 day work week, rotating shift (can be am, pm or night)

Other Information:

• Working Hours: Rotating shifts (6 days)
• Location: Changi Airport (transport is provided for late/night shifts)
• Up to S$2.2K Basic+shift allowance+gd perks+OT claims
• S$5K Joining Bonus!

To apply please click on the LOGIN TO APPLY button with the following details inside your resume for faster processing:

• Reason for leaving
• Last drawn Salary
• Expected Salary
• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Jiang Yiang Dong

EA License | 14C7092

EA Registration Number | R1105012

Processing bill of ladings, commercial invoice, packing list and other shipping related documents. Declare tradenet permits, liaising with customers, shipping companies, local vendors and overseas counterparty. Manage entire end to end shipment arrangement.

Provide customer service support to sales department.

Email resume to [email protected] or call 62643988 ext. 209 (Poh Lin).

Job Responsibilities:

• Key focal point in coordinating customer’s logistical needs and interfacing with operation.
• Good understanding of customer’s business model and operational program.
• Attain good knowledge of the terminal's infrastructure and facilities.
• Maintain a high-quality service level to all parties.
• Manage the customer’s expectations.
• Handle customer’s complaints or inquiries.
• Responsible for the planning, scheduling and co-ordinate daily activities for all customers with optimization and anticipation.
• Orders creation for executing operations into the stock accounting system.
• Communicate effectively with the Operations Department
• Monitor the progress of activities and the completion time to ensure and efficient planning of the next operation.
• Attend to changes and amendments required by customers (including after office hours).
• Attend to and troubleshoot issues or problems raised by Operations (including after office hours).
• Assist with any re-documentation.
• Prepare picking list.
• Prepares updates and monitors stock and orders in the system.
• Co-ordinates the daily operations activities
• Monitors the arrival and collection of shipment and liaises with forwarder on any late or delayed arrival and collection.
• Ensure data integrity for all inventory transactions updated in the system.
• Liaison between clients and warehouse staff on all goods receipts and goods release.
• Arranging and monitoring of goods collection and delivery.
• Perform system inventory reconciliation, weekly cycle count and stock-take.
• Ensure relevant documents are generated for all updates of activities and rates in the system
• Troubleshoot root causes for any inventory variances and assist in the formulation of appropriate preventive actions
• Prompt response to queries and ensure proper follow-up for any outstanding queries
• Assist in the investigations of service issues and ensure actions are undertaken to close off all issues with customers.
• Proactively seek improvement opportunities to improve current operations which can enhance the order processing turn-around time
• Compliance with ISO, GMP/GDP Guidelines
• Ensure the team adhered to ISO procedures, local authority regulatory guidelines on Good Manufacturing Practice (GMP) / Good Distribution Practice (GDP) as well as the client's Regional Quality System in Inventory Management
• Any other tasks/projects assigned by the immediate manager.

Invoicing

• Assist with weekly and monthly invoice generation
• Assist with generating and checking the accuracy of invoicing report
• On-time Administration of Billing and Reporting to customers

Reporting

• Assist with generating required monthly KPI reports
• Assist with Customers' weekly and monthly reporting
• Perform reporting of Key-Performance Indexes (KPIs) accurately and on-time

Your Job

As a Test Engineer, your primary purpose is to drive quality, yield, and productivity improvements. You will manage the new product release to manufacturing and address any problems affecting the smooth operation of parts. You are responsible for all testing activities related to the transfer of new testers from the design center to the manufacturing plant, including working with the design team to qualify new test systems and propose test limits. Your role also involves sourcing and assembling tester components locally, setting up, and debugging test software and hardware.

Our Team

You will be part of the Data-Com and Specialty Solutions Division, reporting to a Senior Engineer, Principal Engineer, or Department Manager. In this role, you'll collaborate closely with a variety of contacts, including assembly subcontractors, vendors, suppliers, QA Engineers, and Product Design Engineers. This teamwork ensures the seamless integration of innovative solutions and product designs in production processes.

What You Will Do

• Responsible for all testing activities related to new tester transfer from design center to manufacturing plant. Work with design team qualifying new test system, proposing test limit.
• Sourcing, assembling all tester components locally, set up and debugging test software and hardware.
• Tester maintenance for on-line/off-line High-Performance testers, Cirris, BERT, OCR, Robert, etc.
• Perform electrical testing, high speed tester support used in the manufacturing of High-Speed cable assemblies based on standards such as Ethernet, Infiniband, Fibre Channel, PCIe, SAS, SATA, etc.
• Integration of custom designed circuit boards and mechanical fixtures with off-the-shelf test equipment such as digital sampling oscilloscopes, TDR modules and network analyzers.
• Integrate software upgrades into high-speed test systems. Work closely with design centers on software improvement feedback to improvise the system for better solutions.
• Perform electrical testing of High-Speed cable assemblies, analyze test data using statistical modeling tools, identify critical to quality aspects of product design and manufacturing process, perform root cause / corrective action analysis, and provide reports to summarize findings.
• Work closely with multifunctional teams to upgrade globally deployable automated production test systems for cable assembly products. Maintain records for project execution, schedule, and budget. System design includes activities such as mechanical fixture design, PCB design, hardware integration, software development, system documentation, performance testing and characterization, etc.
• Create and execute test plans, conduct software reviews, perform system verification and validation, analyze, and resolve failure modes and document the results.
• Create product and test system documentation, specification, and work instructions
• Introduction of new solutions / technologies in the design of production processes.
• Adherence to procedures related to system management of quality, health, safety and environmental.
• Perform work in accordance with the standards of personal and professional integrity as described in the Code of Ethics and Business Conduct. To comply to PBM Guiding Principles for the job carry out under his responsibility.
• Perform other related duties as assigned by Management.

Who You Are (Basic Qualifications)

• Possess a degree or diploma in Mechanical, Manufacturing, Production Engineering, Systems, or Computer fields.
• Minimum of 2 years of experience with test equipment and measuring instruments.
• Proficient in compiled programming languages such as C/C++ or VB/C# within the Microsoft .NET framework.
• Skilled in using scripted programming languages like Python.
• Strong analytical ability to apply logical reasoning, test assumptions, observe results, and make corrections.

What Will Put You Ahead

• 2-5 years of progressive engineering experience with a robust understanding of high-speed testing and design.
• Extensive experience with RF/microwave test and measurement equipment such as digital sampling oscilloscopes, TDR modules, and network analyzers.
• Knowledge of RF/microwave transmission line theory, including s-parameters, Fourier transforms, and characteristic impedance.
• Experience with relational databases using software like Microsoft SQL or MySQL.
• Exposure to RF/microwave circuit design and PCB layout with tools like Mentor Graphics PADS or Cadence Allegro, and familiarity with advanced PCB fabrication methods.
• Training in Lean/Six Sigma methodologies with an understanding and application of tools such as control charts, process capability, and gage R&R.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Responsibilities

• Lead the execution of the Instrument & Control ITP inspection and test in compliance with rules and Tai Power requirement.
• Ensuring that the deliverables from engineering, fabrication, and principal contractors are of the right quality, according to company and industry requirements
• Supporting engineering design review and provide feedback from basic design, details design up to shop drawings such as SCADA, CCTV, Helideck weather monitoring, ESD, telecommunication, F&G
• Interpreting, implementing, and documenting the overall control philosophy across the wind farm components
• Preparing Instrument & Control equipment technical spec and RFQ for supporting procurement team during quotation sourcing
• Participate in preparation and review of Inspection and Test Plan (ITP) of the wind farm offshore substations (OSS) and commissioning procedure.
• Involving in EC/MC completion test package preparation to ensure construction completion handed over as per sequence and schedule
• Perform a daily supervision of the installation and commissioning
• Attending daily call out inspection and work closely with shipyard construction team, QA and commissioning team
• Involving in wind farm OSS final acceptance test / Proof Concept test procedure preparation.
• Participate in Factory Acceptance Tests (FAT) for wind farm OSS equipment
• Involving in O&M procedure preparation and conducting OSS maintenance execution during operation.
• In association with the Maintenance Systems group, review and update the technical content of the preventive maintenance procedures and to recommend changes where improvements in safety, quality or economy may be effected
• Contributing to the continuous development of new technologies to improve the performance and usability of our wind farm control systems

Requirements

• Bachelor Degree in Electronics/Instrumentation/Communication Engineering
• Knowledge in SCADA, PLA or DCS control system
• Problem solver, attention to details,
• Ability to analyze information and data objectively and logically
• Ability to apply creative thinking and problem-solving skills to complex challenges
• Ability to evaluate the reliability and validity of sources and evidence
• Ability to communicate effectively and persuasively with diverse audiences
• Ability to identify and anticipate potential risks and opportunities
• Possess excellent communication and interpersonal skills

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Degree in Chemical/Mechanical/ Electrical Engineering
• Technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details