Job Description:

- Assist HOD and supervise a team of technicians in delivering technical advices/ support to the various business units

- Actively involved in job estimation and WIP (Work-In-Progress) tracking

- Read Manual and Engineering Drawing for any re-engineering work required

- Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems

- Manage and supervise the MRO tasks allocated to the section in supporting commercial products, company's proprietary and non-proprietary Army products

- Deliver allocated and ad-hoc tasks within stipulated timeline and cost

- Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost

- Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches, studies and make necessary recommendations

- Submit investigation reports to relevant authority for approval

- Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained

- Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components

- Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible

- Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts

- Perform other related duties as assigned

Job Requirements:

- Degree in Mechanical/Mechatronic Engineering

- Experience in Component MRO in related industries

- Experience in effectively leading a team of Technicians

- Experience in SAP System is advantageous

- Knowledge in Army systems will be an added advantage

- Ability to read and interpret schematics and datasheets

- Strong technical skills in troubleshooting Engine, Transmission or Gearboxes

- Competent in Mechanical/Mechatronic system

- Familiar with components testing

- Ability to read and interpret Engineering Drawing and datasheets

- Good communication skills and a strong team player

- Able to work under pressure and tight timeline

- Good analytical and problem-solving skill

Responsibilities:

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control

· Develop & review electrical related drawings, e.g. Single Line Diagram, MCC Schematic, Equipment layout, Cable ladder/tray routing layout

· Knowledge in Onshore/ Offshore standards (IEC, NEMA, IEEE & API)

· Prepare Electrical Load Analysis & List

· Familiar with Short-Circuit and Voltage Drop calculation

· Prepare & review Electrical MTO for projects

· Review Electrical equipment’s datasheet

· Strong knowledge in Low voltage MCC/Switchgear, UPS, VSD/VFD & Transformers

· Prepare specification for LV Switchgear, MCC, Transformers & VSD/VFD’s

• Reviewing of customers' specifications and drawings
• Define specifications and scope of work to contractors
• Execution of projects.
• Startup, testing, commissioning and troubleshooting of plants.
• Develop engineering capabilities and work with sales team on project proposal and bidding

Requirements:

• Degree in Electrical Engineering or equivalent recognized by Professional Engineers Board (PEB) Singapore
• Able to read & understand line diagram and generate Bill of Materials from single line diagram
• Knowledge on control, schematics, motor controls and materials take-off
• Proficient in AutoCAD, Microsoft Office
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / vision
• Able to communicate effectively in English at all levels, both verbally and in written reports

An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate. We regret only shortlisted candidate will be notified.

Brief Summary:

As an Optical Thin Film Engineer, you'll drive design strategies, operational optimization, and client satisfaction. Your responsibilities include optics-focused coating design, process optimization, technical support, and staff training.

Job Description:

· Design optical coatings to meet customers’ and internal specifications.

· Develop and implement coating designs and processes to optimize efficiencies and yields while minimizing costs.

· Optimize chamber configurations for the deposition of optical thin films.

· Provide technical support in maintaining coating operations.

· Maintain documents and records of processes and procedures relevant to design, development, and production.

· Report project status and progress to supervisor regularly and accurately.

· Train production staff in the operation of precision optical coating processes.

· Perform other duties as assigned by management.

Qualifications:

· Minimum Degree in Engineering, Physics, Material Science, or related field.

Required Skills & Abilities:

· Minimum 3 years’ experience in optics manufacturing/Solar/Semiconductor/Vacuum industry/ Thin film back ground with at least 1-2 years in optical coating design and production.

· Experience in optical Thin film coatings manufacturing environment is advantageous & preferred

· Knowledge of modern thin film coating production technologies including thermal evaporation, electron beam evaporation, ion-assisted deposition, and magnetron sputtering is preferred.

· Knowledge in Optical Principles, Optical Coatings, Optical Design, Optical Fabrication, Optical Physics, Opto-Mechanical principles, and other technical areas within the Optical Industry is preferred.

· Proficiency in utilizing design software such as TFCalc, Filmstar, Macleod or Optilayer.

· Strong analytical skills and ability to work independently as well as in teams.

· Excellent written and oral presentation and communication skills.

Interested applicants may also send your CV to [email protected]

Energy Engineer

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

About the Role:

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Critical Responsibilities but not limited to:

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Requirements:

• Bachelor’s Degree in Engineering related fields
• Singapore Certified Energy Manager
• At least 5 years’ experience in energy engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behaviour
• Project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance, and calibration.
• Demonstrated capability in vendor service contracts management & knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-centred, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

Reg No: R22104540

EA License no: 94C3609

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Responsibilites

• Assist the Project Manager in producing, analysing and accepting design and technical details
• Assist the Project Manager in developing, managing and overseeing a safety management system for projects across the organisation
• Provide Engineering support to project, production and yard staff as directed by Project Manager.
• Provide technical expertise during design activities and reviews.
• Produce technical documentation as required to support daily operations and tendering activities
• Coordinate stakeholder activities during construction phases of projects not limited to clients, suppliers and contractors
• Create and maintain a culture of continuing improvement in safety performance and awareness across teams & work areas
• Execute Project Plan assigned by Project Manager.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Have the ability to oversee standard and/or routine technical problem solving activities and interact with customers on technical issues and questions
• Assist in the professional development of novice technicians and engineers within the local laboratory and works on well delineated technical issues including standard and routine analysis
• Carry out crucial examination and implementation of testing concepts and data and able to utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Has a clearly demonstrated ability to apply an array of testing techniques in a rational and practical style to help examine issues and build solutions.

Job Requirements:

• Possess a minimum Bachelor Degree of Science or Engineering major and 2 years of relevant working experience in a testing related field
• Possess a high level of expertise related to scope, core theories, concepts, terminologies and boundaries of chosen engineering discipline
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business
• In-depth understanding of testing concepts and compiles testing data from the tests performed

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types

A PROCESS AUTOMATION ENGINEERING COMPANY IS LOOKING FOR AN AUTOMATION ENGINEER

REQUIREMENT:

- DIPLOMA / DEGREE IN ELECTRICAL POWER AND CONTROL

- A GOOD KNOWLEDGE AND EXPERIENCE IN PLC PROGRAMMING AND TROUBLESHOOTING

- MIN 5 YEARS OF WORKING EXPERIENCE

JOB DESCRIPTION

- PLC DESIGN / PROGRAMMING

- TROUBLESHOOTING

- TESTING, COMMISSIONING OF EQUIPMENT / MACHINERY FOR FOOD & BEVERAGE, CHEMICAL INDUSTRIES ...

Overall Job Objectives

Assists the PM to oversee the construction activities, progress, planning, implementing, and monitoring of work schedules in accordance with the master and detailed work programme

Core Responsibilities

1. Attend site meetings and inspection

2. Preparation of documentation including project status report, method of statement and work procedure for the project.

3. Planning, executing, monitoring and control of the project.

4. Liaising and coordinating with all parties such as clients, consultants, consultants’ representatives, site supervisors, and sub-contractors

5. Handing of technical and engineering problems

6. Supervise ongoing site activities closely

7. Ensuring that the quality control of the project is met

8. Ensure that all the construction safety rules and regulations are being observed

9. Prepare necessary work and safety permits, submission documents and drawings once work are completed.

10. Any other ad-hoc tasks assigned

Job Specifications

1. Degree in Engineering or related disciplines

2. Able to read/understand/execute work based on construction drawings

3. Good communication, interpersonal and collaboration skills

4. Minimum 3 years of relevant experience.

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. In this role, you will perform a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory and be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing and have the ability to oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide Input and support on business development opportunities with new or existing customers
• Be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory and carry out crucial examination and implementation of testing concepts and data
• Utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelor Degree in Materials Science, Materials Engineering or Civil Engineering
• Have a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business and working knowledge of laboratory safety
• In-depth understanding of testing concepts
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

Element has an opportunity for an Technical Engineer to join our rapidly expanding team. In this role, you will manage the technical implementation of the Element quality management systems within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Training Program Development: (a) Design and implement standardised training programs for laboratory staff across all required locations, covering equipment operation, test procedures, and safety protocols. (b) Develop training materials, including manuals, presentations, and hands-on demonstrations.
2. Staff Competency Assessment: (a) Assess staff competency regularly through practical evaluations, written tests, and observation of lab practices. (b) Identify skill gaps and recommend tailored training sessions to address deficiencies.
3. Standardisation Across Locations: (a) Ensure consistent training and skill levels across all laboratories by implementing standardised processes and protocols. (b) Conduct audits to verify adherence to training standards and laboratory procedures.
4. Onboarding and Certification: (a) Train and certify new employees in laboratory operations, testing standards, and quality requirements. (b) Maintain records of staff certifications and ensure timely renewals.
5. Technical Support and Guidance: (a) Act as a resource for troubleshooting technical issues during testing procedures. (b) Provide ongoing support to ensure proper equipment usage and methodology adherence.
6. Regulatory Compliance: (a) Ensure all training programs comply with relevant industry standards (e.g., ISO/IEC 17025) and regulatory requirements. (b) Stay updated on changes in industry regulations and incorporate them into training content.
7. Multi-location Coordination: (a) Schedule and conduct training sessions at multiple sites, ensuring all teams receive consistent updates and refreshers. (b) Coordinate with laboratory managers to align training priorities with operational needs.
8. Training Evaluation and Feedback: (a) Evaluate the effectiveness of training programs through feedback, performance reviews, and testing outcomes. (b) Continuously improve training content and delivery methods based on feedback and evolving laboratory practices.
9. Documentation and Reporting: (a) Maintain comprehensive records of training activities, participant progress, and competency assessments. (b) Report training outcomes and compliance metrics to management regularly.
10. Cross-functional Collaboration: (a) Work closely with the Quality team and Operations teams to ensure training aligns with organisational goals. (b) Share knowledge of best practices across sites to drive continuous improvement.
11. Promoting Safety and Quality Culture: (a) Train staff on workplace safety practices, hazard identification, and emergency response procedures. (b) Reinforce the importance of quality control and accurate testing in daily operations.
12. Equipment and Technology Training: (a) Provide training on the use, calibration, and maintenance of laboratory equipment. (b) Introduce staff to new technologies or testing methods as they are adopted.
13. Benchmarking and Continuous Improvement: (a) Monitor industry trends and benchmarks to incorporate innovative practices into training programs. (b) Encourage staff participation in external workshops, certifications, and seminars to enhance their expertise.
14. Performance Metrics Development: (a) Define key performance indicators (KPIs) to measure the impact of training programs on laboratory efficiency, accuracy, and compliance.

Job Requirements:

• Preferred Civil Engineering Diploma or Bachelor of Civil Engineering Bachelor’s degree (or equivalent qualification) with ideally 5 years’ experience in construction materials testing.
• Experience of working in an ISO / IEC 17025 environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Excellent communication skills.
• Experience in participating in quality investigations, undertaking root cause analysis, developing corrective action plans, and ensuring the effectiveness of actions undertaken
• Requirement to keep up to date with changes in the quality landscape and maintain personal professional development.
• Ability to identify quality and technical problems and work with colleagues to determine effective and sustainable solutions.
• Ability to collaborate with colleagues and work effectively as part of a team

Element has an opportunity for a Sales Engineer. In this role you will be an inside seller, responsible for establishing and maintaining strong relationships with a defined group of Element clients and prospects.

You will expand business with dormant and existing accounts, provide increased touch points for accounts, and is budget responsible for 200+ growth and retention clients. It will be your responsibility to assure customer satisfaction through all stages of the sales process. In addition to client relations, this role will interact with the broader Element Sales Team, General Manager, and lab/technical personnel. The ideal candidate will be action oriented, customer focused and have an entrepreneurial drive.

Job Duties:

• Establish and proactively maintain a strong professional relationship with key decision makers and influencers within assigned accounts
• Identify current and future customer service requirements by establishing personal rapport with potential and actual customers, acting as a liaison between the customers and Element
• Identify opportunities early in the sales cycle to ensure maximum share of wallet for Element
• Qualify opportunities with assistance of inbound team / specialists
• Manage relationships and utilize technical support to assist in Sales
• Follow up in a timely manner on quotations for the assigned customer base
• Actively utilize CRM to record activities, ensuring contact details are accurate, duplicates are removed, new information is added and accurate call / visit logs are entered
• Actively participate in regular pipeline reviews, ensuring all CRM records are up to date and critical success factors are identified for key opportunities
• Achieve sales goals by converting and penetrating accounts
• Build and maintain a working knowledge of Element’s service offerings; participate in training/coaching opportunities
• Ensure compliance with all Element policies including but not limited to terms and conditions, trade compliance, treatment of others, moral code of conduct, and employee handbook
• Ensure adherence to all applicable laws pertaining to safety, environment and corporate governance

Job Requirements:

• Approximately 3 years of Business Development, Sales or Account Management experience
• Ability to read and interpret documents such as customer quotes / contracts, marketing materials, and customer testing specifications
• Ability to write routine reports and correspondence and speak effectively before groups of customers or employees of organization
• Ability to calculate figures and amounts such as discounts, interest, commissions and proportions and apply concepts of basic algebra and geometry
• Ability to solve practical customer problems and interpret a variety of instructions, data and details furnished in written, oral, diagram, or schedule form
• A valid driver’s licence, with an acceptable driving record under Element’s policy
• Experience in interpreting testing procedures and requirements desired
• Proficiency in Microsoft Applications (Word, Excel)
• Availability, flexibility, and maturity to represent the company at a broad range of events / projects in the community, with customers and within the company
• Ability to remain calm when faced with mounting pressure related to deadlines and multiple priorities
• Well-developed oral and written communication skills to meet a variety of communication needs
• Good interpersonal skills that foster open upward and downward communication built on mutual respect
• Ability to interface with clients, win new work and determine their requirements; helps develops proposals including cost estimates, work plan and terms and conditions
• Some overnight travel may be required

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Degree/Diploma in Electrical Engineering or related fields

Must have minimum Two (5) year work experience in the servicing, maintenance and troubleshooting on the Sewage water network, pumping station and reclamation plant with ancillary system.

Responsibilities

· Manage & Lead engineering team

· Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations to as part of the engineering project team

· Team development

· QA/QC documentation review of engineering deliverables

· Liaison with clients, project managers, architects, contractors

· Resolve any technical problems faced during project design and/or construction stages

· Any other required duties as required by the Project Team.

· Candidate who has knowledge in the application of Bentley BIM models and project scheduling software Primavera P6 will be added as an advantage.

As a mechanical engineer, your responsibilities can vary based on the industry and specific role, but they generally include:

1. Design and Development:Create and refine mechanical systems and components using CAD (Computer-Aided Design) software.
   Develop prototypes and test designs to ensure they meet required specifications and performance standards.
   Use engineering principles to solve design problems and improve product functionality.
   
2. Analysis and Testing:Perform simulations and analyses to predict how components will behave under various conditions (e.g., stress, temperature, and load).
   Conduct tests and experiments to validate design concepts and performance.
   
3. Project Management:Plan, coordinate, and oversee engineering projects from conception through completion.
   Manage project timelines, budgets, and resources.
   Collaborate with other engineers, stakeholders, and clients to ensure project objectives are met.
   
4. Manufacturing and Production:Develop and oversee manufacturing processes and procedures.
   Ensure that products are produced efficiently and meet quality standards.
   Work with suppliers and manufacturers to source materials and components.
   
5. Maintenance and Troubleshooting:Monitor and maintain mechanical systems and equipment.
   Diagnose and resolve mechanical issues or failures.
   Implement improvements to enhance reliability and performance.
   
6. Compliance and Documentation:Ensure designs and processes comply with industry standards, regulations, and safety guidelines.
   Prepare detailed documentation, including design specifications, reports, and user manuals.
   
7. Research and Innovation:Stay updated with advancements in mechanical engineering and incorporate new technologies into designs.
   Conduct research to explore new materials, techniques, and systems.
   
8. Collaboration and Communication:Work with cross-functional teams, including electrical engineers, software engineers, and project managers.
   Communicate technical information clearly to non-engineering stakeholders.
   

These responsibilities can vary significantly depending on the specific sector, such as aerospace, automotive, manufacturing, or energy.

Assist Project Manager on project functions included but not limited to project management, risk control management etc.

Prepare, plan, and submit project related documents such as method statements, risk assessments, test reports etc.

Coordinate, attend and supervise a team in daily transmission cable testing and commissioning work.

Ensure works are carried out safely, timely and within specifications.

Ensure quality of work is achieved, complying with best industry practices, and following workplace health and safety requirements.

Coordinate and liaise with main contractor, subcontractors, and site supervisors regarding on-site requirements and progress.

Site management, conduct site surveys and resolve problems on site.

Any other duties that may be assigned.

Requirements

Degree in Electrical Engineering recognised by Professional Engineers Board Singapore. Entry level welcome to apply.

Passion in Electrical Engineering and eager to start their career in the industry.

Good oral and written communication skills.

A team player with a positive working attitude and the ability to handle tight deadlines.

Proactive and flexible, able to work on site.

• Class 3 driving licence.

• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement)
• Design systems and components that meet needs and requirements
• Produce outline designs
• Conduct experiments methodically, analyse data and interpret results
• Test and evaluate theoretical designs
• Identify, formulate and produce effective solutions to emerging problems
• Evaluate final product’s overall performance, reliability and safety
• Alter and modify design to meet requirements and to eliminate malfunctions
• Estimate budget and scope of project
• Solicit observations from operators
• Prepare product reports and documentation
• Engage in lifelong learning and develop new theories or methods

Job Scope

The Process Engineer applies engineering principles and techniques to optimise the production processes in a manufacturing environment to meet organisational objectives. His/her work also includes troubleshooting process engineering issues and developing work instructions for out-of-control processes. He/she will be required to analyse manufacturing/maintenance issues and recommend engineering solutions.

In addition, the Process Engineer leads production and manufacturing systems improvement projects and is expected to develop operation plans per organisational objectives. He/she would also be required to ensure compliance with workplace safety, health and other regulatory requirements in his/her line.

The Process Engineer is required to have strong communication skills to collaborate with the production and maintenance team to meet organisational outcomes.

The process engineer will report directly to the Managing Director and Plant Manager.

Tasks

• Adopt new technologies to improve process monitoring.
• Develop work instruction and control plan.
• Enforce compliance with safety and good manufacturing practices and processes in production areas.
• Implement network solutions for production improvement.
• Investigate Out of Control (OOC) and improve the Process Capability (cpk).
• Investigate the root cause of process failures.
• Lead continuous improvement projects.
• Lead working level community exploring opportunities for improvement projects.
• Maintain quality assurance system.
• Manage manufacturing processes using statistical modelling.
• Monitor process performance data to establish good control parameters.
• Review the abnormality report.
• Troubleshoot process engineering issues.
• Conduct technical presentations to management and peers.
• Perform training.

Qualification and Experience

· At least a diploma or degree in Electrical, Mechanical or Process Engineering.

· At least 3 to 4 years of work experience in the Electromechanical Industries as a process technician or associate engineer.

· Candidates with the following experience will be an advantage

o Recycling or refining industries (Incinerator, Crushing, Melting, Plating, etc)

o Project Management

· A team player to work alongside with peers

· Willingness to attend certain courses/licences such as Hazardous Materials Transport Driver (HMDR), WSH Work at Height etc on behalf of the company

· Willing to travel occasionally if required

· Any other duties and job scopes that may be assigned by the Managing Director/Plant Manager

· Class 3 driving licence (mandatory)

Benefits Highlights

• 5 working days, regular working hours, work life balance
• AWS, variable bonus and yearly increment
• Good staff benefits with insurances, dental & medical benefits
• Daily transport and tea allowances
• Lunch provided

Description & Requirements

Job Summary:

We are looking for a highly skilled High Voltage/Medium Voltage Engineer to join our team. The ideal candidate will be responsible for the design, development, maintenance, and troubleshooting of high voltage and medium voltage systems in offshore substations. This role requires extensive knowledge of electrical engineering principles, offshore operations, and safety regulations.

Responsibilities:

• Design and Development: Collaborate with the system supplier to design and develop HV/MV systems and equipment (Electrical, Protection & SCADA) for offshore substations.
• System Analysis: Familiar with Electrical calculations and system analysis to determine specifications and ensure optimal performance to meet client requirements.
• Compliance: Ensure all HV/MV systems comply with relevant safety standards and regulations.
• Inspection and Testing: Perform regular inspections, conduct factory testing and support in field commissioning to assess the technical compliance and performance of HV/MV equipment.
• Troubleshooting and Technical Support: Diagnose and provide technical support in resolving technical issues on HV/MV systems and guidance to junior engineers and technicians.
• Collaboration: Work closely with other engineers, technicians, vendors and regulatory bodies and clients to address and solve problems related to HV/MV systems.
• Documentation: Prepare detailed reports, system architecture diagrams, purchase specifications, functional description and control philosophy to document system designs, construction, modifications, and maintenance activities.
• Preventative Maintenance: Collaborate with the system supplier to develop and implement preventative maintenance procedures for HV/MV systems to ensure safety and performance.

Requirements:

• Education: Minimum bachelor’s degree in electrical engineering or related field.
• Experience: At least 3 ~ 5 years of relevant experience in high voltage or medium voltage engineering, preferably in an offshore environment.
• Skills: Strong analytical and problem-solving skills, excellent communication and teamwork abilities, proficiency in using electrical design software.
• Certifications: Relevant certifications in high voltage or medium voltage engineering are a plus.
• Knowledge: In-depth knowledge of electrical engineering principles, high voltage systems, offshore operations, and safety regulations.
• Innovation: Ability to stay up to date with the latest advancements and best practices in HV/MV engineering.
• Leadership: Capability to lead and mentor junior engineers and commitment to safety.
• Adaptability: Ability to work as a team in challenging offshore environment and possess good planning, organizational, interpersonal skills with adaption to ever-changing

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. In this role, you will perform a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory and be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing and have the ability to oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide Input and support on business development opportunities with new or existing customers
• Be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory and carry out crucial examination and implementation of testing concepts and data
• Utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelor Degree in Materials Science, Materials Engineering or Civil Engineering
• Have a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business and working knowledge of laboratory safety
• In-depth understanding of testing concepts
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Duties:

• Maintain 5S & Safety in Laboratory, plan and deliver services to meet the local and regional business plan objectives
• Technical report preparation and authorization and provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Provide onsite project leadership and testing execution while ensuring development and training of junior staff
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing, possess the ability to oversee standard and/or routine technical problem solving activities and able to interact with customers on technical issues and questions
• Provide Input and support on business development opportunities with new or existing customers and be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory
• Carry out crucial examination and implementation of testing concepts and data, utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions
• Ensure that tests assigned to the technicians are performed in a timely manner in accordance with validated test protocols and procedures; give training to the technicians as required, upkeep test reports and related records and ensure equipment and testing meets the requirement of ISO/IEC 17025
• Maintain and upkeep test facilities and laboratory equipment, assist with hazard identification and risk assessment exercises within their areas of responsibility and monitor day-to-day health and safety in their section of responsibility and ensure all hazards, near misses and accidents are reported

Job Requirements:

• Working knowledge of laboratory safety
• Possess a Degree in Civil Engineering or Materials Engineering major or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic / professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Project: HDB at Yishun (BTO)

Job Description:

• Provide standing supervision as and when directed by Consultant team.
• Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.
• Compile relevant equipment, material, inspection and test certificated submitted by the contractors as required for the project records.
• Ensure company's safety rule is complied with.
• Resolve all site issues and ensure timely completion of the project.
• Ensure all works are carried out in accordance to drawings and specifications.
• Attend site meetings and perform site inspections.
• Prepare weekly/monthly progress reports.
• Any other task assigned from time to time.
• Estimated commencement of work in March 2025.

Job Requirements:

• Degree in Civil/Structural Engineering from a recognized university and registered with IES/ACES as a Resident Engineer
• Minimum 3 years experiences as Resident Engineer in precast high rise residential building project.
• Experience in building projects, experience in HDB projects will be an advantage.
• Excellent interpersonal and communication skills
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Job Description:

• Be directly involved in building, assembling, testing, troubleshooting and improving Unmanned Ground Vehicles (UGVs) by working with system experts.
• Handle system integration, testing, data collection, and validation of UGV's performance.
• Perform electrical and mechanical sizing, ensuring that components are properly sized and integrated.
• Work with electrical and control engineers on prototyping and troubleshooting systems.
• Assist in designing mechanical parts such as chassis and brackets.
• Manage the procurement of components.
• Create documentation, including design specs, test cases, system requirements, and user manuals.
• Work with technicians during integration and testing, and help resolve technical issues.

Requirements:

• Degree in Mechatronics, Robotics, Electrical/Electronics, Mechanical Engineering, or similar fields.
• Entry level candidate are welcome to apply.
• Knowledge and proficiency in system integration, control theory, motors, sensors, and mechanical systems.
• Familiar with CAD and troubleshooting of electrical and mechanical systems.
• Good problem-solving skills and the ability to manage multiple tasks and deadlines.
• Team player with strong communication skills, eager to learn and work in new technology areas.
• Experience building and testing robotics/control systems would be advantageous.
• Experience and/or understanding with communication interfaces like RS232, RS485, and CAN would be advantageous
• Experience and/or understanding of vehicle systems such as drivelines, steering and brakes would be advantageous.

The research and development engineer will focus on scaling up and optimizing the solution-based perovskite solar module fabrication.

Key Responsibilities are listed as following:

• Material Development: Formulate and optimize perovskite precursor solutions to achieve high-performance thin films with excellent uniformity, crystallinity, and stability.
• Process Optimization: Develop and refine large area solution-based deposition techniques such as slot-die coating, inkjet printing, and blade coating for scalable production.
• Device Fabrication: Design and fabricate perovskite solar cells, including single-junction and tandem architectures, using solution-based processes.
• Characterization: Perform advanced characterization of solution-processed materials and devices, including optical, electrical, and structural analysis using techniques like UV-Vis spectroscopy, SEM, XRD, PL, and IV testing.
• Stability and Reliability: Investigate degradation mechanisms of solution-processed perovskite layers and develop strategies for improving device stability and reliability under operational conditions.
• Innovation: Explore new solvents, additives, and processing conditions to enhance performance and scalability of solution-based perovskite materials.
• Collaboration: Work closely with cross-functional teams, including material scientists, device engineers, and manufacturing teams, to align research outcomes with production goals.
• Documentation and Reporting: Maintain detailed records of experiments, analyze results, and prepare technical reports, presentations, and publications.

Qualifications:

· Bachelor or Master’s in Materials Science, Chemistry, Chemical Engineering, Physics, or a related field.

· Demonstrated expertise in solution-based perovskite synthesis, thin-film deposition, and device fabrication.

· Experience with solution processing techniques, such as spin coating, slot-die coating, or inkjet printing.

· Experience with drying processing techniques, air-knifing, VCD and oven annealing.

· Proficiency in materials and device characterization techniques, including SEM, XRD, UV-Vis, and IV measurement.

· Strong understanding of perovskite chemistry and degradation mechanisms.

· Excellent analytical, problem-solving, and critical-thinking skills.

· Ability to work independently and collaboratively in a fast-paced research environment.

Preferred Skills:

• Familiarity with large-area coating processes for scalable production.
• Experience in tandem solar cells or integration with other photovoltaic technologies.
• Knowledge of industrial-scale solution processing methods like roll-to-roll fabrication.
• Proficiency in simulation tools for solar cell design and analysis.