Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Responsibilities:

• Lead line leaders and operators to achieve daily production targets, quality, productivity, and yield.
• Conduct daily pass-down meetings and escalate any line issues.
• Manage manpower, overtime, and consumables planning.
• Ensure adherence to manufacturing and safety procedures.
• Train and coach leaders and operators to enhance performance.
• Implement improvements to minimize human errors.
• Maintain discipline and good housekeeping in the production line.
• Collaborate with departments on projects, evaluations, and preventive maintenance in the fab.

Requirements:

• Diploma and above in Engineering or equivalents.
• Minimum 2 years of working experience in a related industry.
• Experience in high-tech, high-volume manufacturing environment is preferred.
• Strong leadership and communication skills.
• Willing to work 12-hour shifts (permanent day or night, as assigned).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist BD Director in managing program related issues and correspondences
• Coordinate and work with tool and assembly equipment suppliers to ensure smooth program launches
• Design work flows and optimise production layout together with production department to improve machine efficiency
• Source and gather tooling and components quotation from supplier for initial project start up
• Work on new quotation and packaging requirement for new parts requirement
• Support production and quality departments to troubleshoot the processing & quality issues pertaining to plastic parts
• Monitor and track progresses on the program activities
• Provide customer support and response to customer enquiries on time
• Update all tooling activities and bill of materials and project review records
• Follow up and track on engineering changes for each tooling
• Coordinate all mold trials activities
• Design and work with supplier for jig and fixture required for secondary processes
• Prepare periodically tool-life report for customer
• Any other duties as and when assigned

Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Diploma/ Degree in Mechanical Engineering or equivalent
• 3-5 years relevant experience
• Good knowledge of project management & production process
• Good verbal and written communication in English
• Independent, good initiative and able to multitask in fast paced environment
• Experience in handling Healthcare product is an advantage

Responsibilities:

• Lead line leaders and operators to achieve daily production targets, quality, productivity, and yield.
• Conduct daily pass-down meetings and escalate any line issues.
• Manage manpower, overtime, and consumables planning.
• Ensure adherence to manufacturing and safety procedures.
• Train and coach leaders and operators to enhance performance.
• Implement improvements to minimize human errors.
• Maintain discipline and good housekeeping in the production line.
• Collaborate with departments on projects, evaluations, and preventive maintenance in the fab.

Requirements:

• Diploma and above in Engineering or equivalents.
• Minimum 2 years of working experience in a related industry.
• Experience in high-tech, high-volume manufacturing environment is preferred.
• Strong leadership and communication skills.
• Willing to work 12-hour shifts (permanent day or night, as assigned).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

· Review & upgrade existing automated production lines via root cause analysis for continuously improvement to meet production new requirement.

· Create, prepare, update automation project documentation, procedures & drawings of Gantt chart, weekly progress report, process / equipment flow chart, validation list, buy off/FAT/SAT (Factory / Site Acceptance Test) procedure, mechanical assembly & layout drawing, electrical diagram & wiring, I/O list, co-robot & PLC program, SOP (Standard Operation Procedure), WI (Work Instruction) & PM (preventive maintenance) check list.

· Attention to details of design concepts, provide most cost-effective technical solutions in line with customer and company needs.

· Update & back up automation system documentation, procedures, drawings, software, co-robot & PLC programming timely.

· Coordinate with internal team (BD, QC, production, maintenance) and external supplier to make projects successful.

· Prepare machines preventive maintenance check list and training operation & maintenance staffs. Service & troubleshooting machines when requested.

· Adhere to plant safety, food safety, sanitation standards and following all GMP guidelines.

· Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

· Collaborates with suppliers and machine maker to complete all FAT and SAT requirements within the delivery date.

· Perform Lean principle (5S, Gemba-walk, 5-why and B&A suggestion improvements)

· Any other duties when assigned by management

Requirements:

· Diploma / Degree of Engineering in Automation / Mechatronics / Mechanical / Electrical or equivalent.

· Previous 3-6 years’ experience as a validation engineer or in a similar role.

· Strong understanding of automation engineering system design concept & development, manufacturing processes and safety regulations.

· Excellent mathematical and analytical skills. Attention to detail.

· Knowledge of statistical software analysis (e.g., MINITAB, MATLAB)

· Well versed in Microsoft office tools (Excel/ Word / Power point)

· Have knowhow in Process Failure Mode Effect Analysis (PFMEA) and CPK study.

· Attention to details and eager to learn new technology.

· Location: Pioneer/Joo Koon| Mondays to Fridays (8:30am to 5:45pm)

· Monthly salary x 13 + Variable Bonus. Monthly salary will commensurate according to experiences

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

At Temasek Laboratories@NTU, our mission is to undertake cutting-edge research in defence science and technology, driving new solutions and advancements across various research areas, including Microsystems Technology, Hardware Assurance, Signal Processing, Advanced Materials, Advanced Laser Technology, and Emerging Technologies.

Microsystems Technology Development Centre (MTDC) at TL@NTU is having ISO certified III-V Wafer Fabrication Line up to 100-mm diameter wafers with strong industrial/academic experienced Technical Specialists/ Engineers/ Scientists. We are a fast-paced research facility that designs, develops, and manufactures integrated chips, i.e. heterogeneous system in package modules, for defence and commercial applications.

We are looking for a hands-on Thin Film engineer who demonstrates a positive attitude, collaborates well in a team, and possesses strong technical abilities along with sound problem-solving skills.

Key Responsibilities:

• Work with the module leader and execute the design of experiment (DOE) using advanced techniques such as sputtering, evaporation, and chemical vapor deposition (e.g. SiO2, SiON, TaN, Au, Ti, Al, Ni, Pt and etc.).
• Develop and optimize deposition parameters to achieve precise film thickness, uniformity, and quality.
• Help to identify and troubleshoot process issues, working towards yield enhancement and performance improvement.
• Utilize a range of characterization techniques, including optical microscopes, surface profiler, SEM, Ellipsometer to analyze thin film properties.
• Maintain detailed documentation of processes such as standard operating procedure (SOP), experimental setups, and results for future reference and knowledge transfer and including training.
• Oversee the operation of laboratory equipment and ensure proper functioning. Work with the equipment vendor to conduct routine maintenance, troubleshooting, and calibration of equipment to minimize downtime.
• Work with the University’s procurement team to source and acquire necessary equipment. Evaluate and select vendors, ensuring equipment aligns with research requirements and budget constraints.
• Adhere to laboratory safety protocols and ensure compliance with University and regulatory standards.
• Collaborate with different modules and team members.
• Communicate effectively with team members, providing updates on processes and status of equipment.

Job Requirements:

• Diploma in Engineering (e.g. Microelectronics, Electrical & Electronics Engineering, Material Engineering) with 3 years of relevant working experience or Bachelor’s degree in any Engineering (e.g. Microelectronics, Electrical & Electronics Engineering, Material Engineering).
• Hands-on working experience in semiconductor fab/cleanroom environment in Thin Film area preferred (e.g. SiN, SiO2, TaN, Al, Au, Ti, Ni, Pt and etc.).
• Ability to create and analyze DOE for Thin Film process.
• Experience in wet bench processes, especially the lift-off technique, is essential.
• Basic knowledge in semiconductor fabrication process and device physics.
• Strong understanding of thin film materials and their properties, with expertise in process optimization and troubleshooting.
• Excellent problem-solving skills and ability to work effectively in a collaborative team environment.
• Strong communication skills, with the ability to convey complex technical concepts clearly and concisely.
• Commitment to maintaining high standards of safety, quality, and professionalism in all aspects of work.

We regret to inform that only shortlisted candidates will be notified.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Perform inspections and tests on electrical and instrumentation systems, including cables, panels, field instruments, and control systems.
• Ensure installations and testing comply with approved drawings, project specifications, and relevant standards
• Prepare and review Inspection and Test Plans (ITPs), Method Statements, and Quality Control procedures.
• Maintain quality records, such as test reports, calibration certificates, and inspection checklists.
• Liaise with construction team, subcontractors, and corporate QMS department to address quality-related issues
• Support commissioning activities by ensuring all quality requirements are met before system handover
• Ensure compliance with industry standards, local regulations, and safety requirements
• Any other duties to be assigned from time to time

Pre-requsities

• Degree/Diploma in Electrical Engineering or related field
• Minimum 5 years of experience in power or industrial plant construction projects
• In-depth knowledge of electrical systems for critical equipments in power plant construction
• Proficiency in inspection and testing of electrical and instrumentation systems
• Effective communication and interpersonal skills for collaboration with multidisciplinary teams
• Commitment to safety and compliance with regulatory requirements
• Project location: Jurong Island (Transport provided at designated pick-up points)

Role Summary:
As a Process Engineer, you will oversee machine operations and ensure that all preparations are conducted aseptically before production begins. You will coordinate between technicians and maintenance staff to ensure smooth operations and effective teamwork.

Key Responsibilities:
• Oversee daily machine schedules, production targets, and machine maintenance.
• Resolve worker issues and coordinate activities to meet company goals.
• Train new employees on equipment operation and safety procedures.
• Maintain ISO9001, ISO13485, and GMP documentation standards.
• Ensure workplace safety and cleanliness.
• Drive continuous improvement in quality and process efficiency.

Requirements:
• Diploma / Degree in mechanical , chemical engineering field with 1-3 years of relevant working experience.
• Planning experience is an advantage.
• Open to work shift working hour

How to Apply:
Interested candidates, please submit your updated resume by using Quick Apply button
We regret to inform that only shortlisted candidates will be informed.

Yip Seow Thung
Registration Number: R24121304
EA License No: 18C902

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Role

Provide engineering support to the operations team to operate a desalination plant efficiently and safely

Responsibilities

1. Liaising with PUB on dispatch of drinking water

- Daily plant availability and dispatch instruction compliance

- Liaise with PUB on water quality and reporting

2. Manage operations team

- Ensure operations as per SOPs and safe work procedures

- Coordinate with Maintenance team on plant/process optimization and improvement

- Handle Administrative and procurement matters for plant operations

- Operational planning, including manpower and chemical logistics

- Participate as member of the water safety team and emergency response team

- Disseminate information and instructions to operations team

- Coordinate training for operations team

- Troubleshoot for process upsets

Requirements

1. Degree in Chemical or Environmental Engineering

2. Knowledge and 5 years’ experience in Water Plant operations using membranes

3. Willing to work in Jurong Island

Established in 2010, the Energy Research Institute @ NTU (ERI@N) is a pan-university research institute that focuses on systems-level research for tropical megacities. It performs translational research that covers the energy value chain from generation to innovative end-use solutions, motivated by industrialisation and deployment. ERI@N has multiple Interdisciplinary Research Programmes which focus on translational Research, Development & Deployment which focus on specific area of the energy value chain, and a number of Living labs and Testbeds which facilitate large scale technology deployment enabling validation and demonstration of real-world applications.

For more details, please view https://www.ntu.edu.sg/erian

To support the research project titled:

• Technology Development of Thermal Management, Lifetime Assessment and Prognostics for Li-ion Battery Energy Storage System in Next-Generation Grid
• Design and Development of Compact Energy Storage System
• Design and Development of ESS coupled with solid state transformers

This job position is required for recruiting a highly educated and experienced researcher with experience to develop battery management system for lithium-ion battery packs in energy storage system application. It will also fulfil the objective of NTU in developing energy storage system and novel renewable energy technologies.

Key Responsibilities:

• Develop overall battery management scheme according to system performance requirement
• Design and develop software of battery management system
• Design and develop hardware and PCB layout of battery management system
• Design and develop state estimation algorithm of battery management system
• Design and develop balancing control strategy of battery management system
• Conduct simulation test and debug of developed software of battery management system
• Conduct simulation test, layout design, PCB design, manufacturing, and testing
• Conduct simulation test of the designed algorithm, balancing strategy.
• Responsible to prepare design progress document and final project report

Job Requirements:

• Masters degree in electronics, control, electrical, or similar
• Research or working background in lithium-ion battery product development and production is a must.
• Experience in technology development for lithium-ion battery management system is required.
• Candidate must be familiar with design requirements on control, state estimation, balancing of battery packs
• Familiar with software like Matlab/Simulink, Keil, CodeWarrior, Altium Designer.
• Understand development progress of battery management system product
• Self-motivated and takes initiative
• Independent and can work well with a team
• Organized and detail oriented
• Excellent verbal and written communication skills

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Key Responsibilities:

AI Model Development: Design, develop, and deploy machine learning models and algorithms to solve complex business problems.

System Maintenance: Monitor and maintain AI systems to ensure optimal performance, reliability, and scalability.

Data Management: Collect, pre-process, and analyze large datasets to train and validate AI models.

Collaboration: Work closely with cross-functional teams, including data scientists, software engineers, and business stakeholder, to integrate AI solutions into existing systems.

Continuous Improvement: Stay updated with the latest advancements in AI and machine learning, and implement best practices to enhance our AI capabilities.

Experience:

• System Integration & Deployment
• System Monitoring and Maintenance
• Software system version control

Knowledge and Skills:

• Programming Languages
• Machine Learning & Deep Learning
• Data Management
• Natural Language Processing
• Computer Vision
• Computer System Monitoring and Maintenance
• Good communication skills, both written and oral
• Team player with the ability to work independently
• Stakeholder Management
• Analytical Skills
• Problem Solving Skills

Education, Qualifications and Special Training

• Educational Background: Bachelor’s or Master’s Degree in Computer Science, Engineering, or a related field.
• Technical Skills: Proficiency in programming languages such as Python, R, or Java. Experience with machine learning frameworks like TensorFlow, PyTorch, or scikit-learn.
• Problem-Solving: Strong analytical and problem-solving skills with the ability to think critically and creatively.
• Communication: Excellent verbal and written communication skills to effectively convey technical concepts to non-technical stakeholders.
• Experience: Prior experience in AI/ML projects, preferably in a corporate setting.

Personality Traits:

• Strong sense of responsibility and task ownership
• Strong communication skills and interpersonal skills
• Strong curiosity about new technologies, management paradigms that are relevant to the company and Marine industry
• Able to work under pressure
• Able to work independently, and with incomplete information

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Highlights

Immediate Hiring

Free staff meals

In-house gym facility

Short walking distance from Tuas Link MRT

Job Responsibilities

• Prepare sales orders, delivery orders, invoices and other necessary documents
• Attend to customers queries with prompt and professional service
• Ensure timely execution of customers’ orders
• Communicate with customers via various channels.
• Liaise with internal departments and/or third parties to process order requests from customers.
• Maintain good relationships with customers by providing excellent sales support and accurate product information.
• Handle and resolve customers feedback issues.
• Any ad-hoc duties as assigned by Manager.

Job Requirements

• Diploma in any relevant discipline
• At least one year of experience in customer service is preferred
• Customer-oriented with positive attitude and pleasant personality
• Excellent interpersonal, communication, problem solving and phone/email etiquette skills
• Can work independently in a fast-paced environment with minimum supervision

Warehouse Customer Service

Occupation

WAREHOUSE CLERK

Job Description & Requirements

• Coordinate port operations (include stevedore, stuffing/unstuffing, forklift, internal railing etc)
• Provide quotations to customers
• Provide billings to customers
• Ensure all port operations related documents details are in order
• Sorting and filing of documents
• Other ad hoc duties as assigned by Supervisor

Requirements:

• Fresh Graduate are most welcome
• On job training will be provided

Help us get ahead of disease together with our GSK Biologics Tuas Business Area

Education required: BS degree from an accredited college/university, preferably in Mechanical or Chemical Engineering discipline with a focus in Process equipment reliability and maintenance

Language requirement: Written and spoken fluency in English

Expected Start date: Immediately

Application deadline: We will close this vacancy when we have enough applications, so please apply as soon as you can so your application can be considered.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

What will you do?

Involve in and not limited to:

Maintenance and Calibration Project, Improvement in process reliability, Equipment troubleshooting, Qualification of new equipment, SOP amendment due to periodic review/CAPA and Continuous improvement Programme.

What will you learn?

You will be expose to but not limited to:

• The different type of equipment that are used for Vaccines manufacturing.
• How the equipment functions and the impact of each equipment have on the production system.
• Liaising with external contractors and vendors for equipment issues and projects.
• Liaising with above site (GSK sister plant outside Tuas) for sharing issue or requesting for support.
• Working closely with quality and production department on understanding problems that are contributed by process equipment.
• Understanding and using the different type of modules in SAP for routine and ad-hoc activities.
• Deeper understanding the requirements of a Vaccines site on producing vaccines.

What are we looking for?

• A lively interest in vaccines manufacturing, the commercial world and the biopharma industry
• Appetite to work as a business partner, building strong relationships with key stakeholders
• Adaptability to change and working under pressure
• Excellent communication skills that help you influence
• Strong problem-solving skills driven by curiosity
• Drive and confidence to trust your own judgment
• Great project management skills and the ability to prioritise

What do we offer you?

• Understand and experience the GSK Culture
• Work with a diversified team of professionals
• Implement technical knowledge and skills that you have acquired at school
• Apply and develop soft skills such as interpersonal, communications and negotiation skills
• Transport to and from site to MRT stations in centralised locations all across Singapore (only for manufacturing sites)

Job Description:

• Coordinates, prioritizes, and resolves issues encountered by the team.
• Optimizes the usage of manpower, standard time, equipment, and energy of the team.
• Escalates critical/complex issues that will impact the business and manage quality issues.
• Contacts customer & Dealers/Distributors, collects feedback, and establishes and maintains good relationship with customers, Dealers/Distributors.
• Responds to key customer complaints and carries out customer satisfaction investigations to ensure establishment of appropriate improvement plans.
• Forecast, monitor, and document financial performance against plan.
• Manage end-end aftersales service delivery and account receivable through Microsoft Business Central.
• Recruit, interview, hire and train technicians as required to meet workload demands, and company or customer expectations and requirements.
• Manage a team of service technicians direct reports, and a few in-house subcontractors.
• Manage parts, materials and tools procurement, and logistics scheduled maintenance, repairs, and emergency service calls.
• Engage in end-end process with subcontractors, from quotations comparison to site deliverables to invoice.
• Responsible for contract renewals and simple repair quotations process.
• Drive EH&S initiatives, create EHS awareness and monitor compliance
• Responsible for KPIs such as productivity, field expenses, Aftermarket Service Sales revenue/margins

Job Requirement:

• Degree/Diploma in Mechanical/Electrical/Electronic Engineering or equivalent practical experience.
• Min 3 Years of experience in a similar supervisory role within Aftermarket Service Industry
• Strong organizational and problem-solving skills.
• Excellent communication and interpersonal abilities.
• Proficiency in Microsoft Business Central or similar tools.
• Understanding of EH&S standards and practices.
• Passionate in picking up knowledge of Professional/Commercial Foodservice Equipment
• Meticulous and able to handle large volume of work with high accuracy.
• Independent worker who is reliable to deliver without supervision.

Job Description

· Work closely with business, distributors/end customers, internal customers to ensure timely delivery of equipment.

· Coordinate work process and information to ensure the timely arrival of heavy equipment or delivery information to customer.

· Ensure smooth running of daily service operation and resolve on-site operational issues and customer service level satisfaction.

·Liaising with existing customer and handling customer enquiry and feedback

· Work well with the engineers and mechanics on the follow up updates of service calls and job delivery.

· Liaise internal daily operation movements.

. Update weekly Service Job Card No.

· Monitor training records

· Liaising with existing customer and handling customer enquiries and feedback.

· Must be responsible, committed and able to meet deadlines

· Build good relationship with the management, team and customers.

· Other adhoc duties that may be assigned.

Job Requirements:

· Preferably with Diploma in Administration / Engineering

· With 2-3 years of experience handling operation / customer service coordination

· Support business objectives; deliver high level of service & performance.

· Familiar with heavy equipments such as reach stacker, crawler crane, excavators, trucks and forklift will be an advantage

· Good communication and interpersonal skill

Introduction:

We are looking for dynamic, committed individuals to join our Sales team as Sales Executives to grow our HORECA business.

Job Highlights / Benefits

• Staff lunch provided
• In-house gym
• Staff discount
• Walking distance from Tuas Link MRT

Responsibilities:

• Manage clients’ relations and build contacts with potential clients for new business opportunities.
• Responsible for planning and implementing market penetration strategies and sales targets and for building strong relationships with existing FMCG clients.
• Identify leads and lead new business opportunities to expand distribution channels / networks.
• To exceed or achieve monthly sales targets / new business development served in the assigned area.
• Track, monitor and analyse products, channels and customers sales trends in order to maximise sales opportunities and achieve desired sales results.
• Carry out and plan other sales and marketing functions to increase efficiency.
• Take initiative in implementing best practices to perform duties.

Requirements:

• Diploma in Business / Marketing / Sales
• At least 2 years of relevant experience is preferred
• Proficient in Microsoft Office Suite (Excel, Word, PowerPoint)
• Able to multi-task and work independently
• Strong interpersonal and communication skills
• Self-motivated, hardworking and organized in work

Details:

Our client is a significant player in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised telecommunication system integrator in the oil and gas global market, they provide turnkey project systems that cover a full spectrum of services in the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, and various telecommunication system drawings.

Salary: $3800 - $5500

Job Description:

1️⃣ Lead engineering design, ensure thorough understanding of client requirements to propose optimal solutions

2️⃣ Prepare engineering documents (VDRL) and address client feedback promptly with high quality and accuracy

3️⃣ Create preliminary drawings and guide AutoCAD drafters in producing engineering deliverables

4️⃣ Incorporate industry standards and best practices into design, drawing preparation, review, and submission

5️⃣ Supervise equipment assembly, cabinet integration, system configuration, simulation, testing, and verification

6️⃣ Provide in-house training for client and commissioning engineers

Requirements:

1️⃣ Minimum Diploma in Engineering (Electronics, Electrical, Mechanic, Marine & Offshore) or possesses technical knowledge about Maritime communication systems

2️⃣ Experience in a similar role within the industrial markets

3️⃣ Experience as an ex-sailor, Ex-Radio Officer, or Ex-Navy personnel are added advantage

4️⃣ Well-organised documentation and time management skills

5️⃣ Ability to articulate and share concepts with customers and suppliers

6️⃣ Knowledge of AUTOCAD will be an added advantage

7️⃣ Site commissioning/radio surveying experience as per SOLAS / MODU (Not a must-have but good to have)

8️⃣ Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, and iBwave for UHF/GSM coverage (Not a must-have but good to have)

⭕️ Please send your updated resume to: berrylim(at)rapidrecruitmentasia.com

For quicker response, please contact me (Berry) directly at:
Telegram: (at)Berryseisei or HP: (at)+65 92472216

Rapid Recruitment Asia Pte Ltd (16C8261)
Berry Lim (R23117685)