About Our Group

RMO Material Science Laboratory’s primary mission is to provide analytical test solutions to enable media and product qualification on product yield, quality, and reliability. The team also serves a critical role on HDM tribology, contamination, and defect reduction, working closely with and enabling other functions in the disciplines of Mechanical, Electrical, Recording Technology, R&D, Customer Integration, and Manufacturing. This role will report to an Engineering Manager.

About the Role – You will:

Be a team member in next generation Recording media development & product qualification to improve process stability & manufacturability. Task to work with R&D team & Process to support media Carbon and lubricant characterization, interface, and surface contamination analysis.

Perform material science lab test and hands on operation laboratory analytical instruments e.g. XPS, Raman, GDOES & SEM-EDX.

• Work on data analysis and support Work with team to support measurement focus on media Carbon overcoat & sputter layer characterization.
• Work in a team that develops metrology and deploys technical solution to meet the products CTQ and reliability requirements of hard disc drive.
• Work closely with the design functional groups to provide high-level analytical support to product and process engineering team.

About You

• Self-motivated and demonstrated ability to adapt to a changing environment.
• Ability to communicate engineering and technical concepts to internal and external partners.
• A team player with the ability to collaborate with cross functional and international partners.
• PhD in Material Science/Chemistry/Analytical Chemistry.

Your Experience Includes:

• Specialize in surface techniques & analysis, polymer/ coatings/material characterization.
• Lab skills, including operation of analytical spectroscopic and data analytics techniques.

The research and development engineer will focus on scaling up and optimizing the solution-based perovskite solar module fabrication.

Key Responsibilities are listed as following:

• Material Development: Formulate and optimize perovskite precursor solutions to achieve high-performance thin films with excellent uniformity, crystallinity, and stability.
• Process Optimization: Develop and refine large area solution-based deposition techniques such as slot-die coating, inkjet printing, and blade coating for scalable production.
• Device Fabrication: Design and fabricate perovskite solar cells, including single-junction and tandem architectures, using solution-based processes.
• Characterization: Perform advanced characterization of solution-processed materials and devices, including optical, electrical, and structural analysis using techniques like UV-Vis spectroscopy, SEM, XRD, PL, and IV testing.
• Stability and Reliability: Investigate degradation mechanisms of solution-processed perovskite layers and develop strategies for improving device stability and reliability under operational conditions.
• Innovation: Explore new solvents, additives, and processing conditions to enhance performance and scalability of solution-based perovskite materials.
• Collaboration: Work closely with cross-functional teams, including material scientists, device engineers, and manufacturing teams, to align research outcomes with production goals.
• Documentation and Reporting: Maintain detailed records of experiments, analyze results, and prepare technical reports, presentations, and publications.

Qualifications:

· Bachelor or Master’s in Materials Science, Chemistry, Chemical Engineering, Physics, or a related field.

· Demonstrated expertise in solution-based perovskite synthesis, thin-film deposition, and device fabrication.

· Experience with solution processing techniques, such as spin coating, slot-die coating, or inkjet printing.

· Experience with drying processing techniques, air-knifing, VCD and oven annealing.

· Proficiency in materials and device characterization techniques, including SEM, XRD, UV-Vis, and IV measurement.

· Strong understanding of perovskite chemistry and degradation mechanisms.

· Excellent analytical, problem-solving, and critical-thinking skills.

· Ability to work independently and collaboratively in a fast-paced research environment.

Preferred Skills:

• Familiarity with large-area coating processes for scalable production.
• Experience in tandem solar cells or integration with other photovoltaic technologies.
• Knowledge of industrial-scale solution processing methods like roll-to-roll fabrication.
• Proficiency in simulation tools for solar cell design and analysis.

Customer Service Coordinator

Alternate 5.5 Days/week

Job Description

• Handles customer inquiries via phone or email
• Supports customers in providing quotations and follow up on the inquiry
• Create Job order and update on amendments accordingly
• Provides post-sales support and day-to-day business liaison with customers
• Ad hoc duties assigned

Requirements

• Certificates or qualifications equivalent to Secondary Education
• Minimum of 2 years of related working experience preferred
• Proficient in written and spoken English
• Good related customer service/sales coordination experience
• Able to multi-task and work with minimal supervision

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

JOB DESCRIPTION

· Design and program automated test scenarios according to test plan with its acceptance criteria

· Manage and maintain end to end automated test framework such as prepare test environment, test data, update functional testing scripts in accordance with changing requirements

· Work with QC project leader to identify, propose, prioritize and implement test automations.

· Work with test engineers to troubleshoot observed issue, determine root cause and identify solutions

· Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency

· Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

· Bachelor’s/ Master’s degree in Computer Science, Software Engineering or other equivalent degree/experience

· Strong python scripting skill and C++ programming background

· Good written and verbal communication skills in Chinese is a bonus ( Required to liaise with Tawiwan colleagues)

· Able to work well both independently as well as in a team

Reporting to the Manager, Engineering, the Process Engineer will provide technical guidance on packaging-related customer complaints, deviations and investigations, as well as develop and participates in continuous process improvement activities to enhance packaging performance metrics. In collaboration with functional groups, will support the introduction of new products/market to the packaging operation as well as qualify new components and equipment capabilities.

WHAT YOU WILL DO

Critical responsibilities but not limited to:

• Investigating packaging customer complaints and authoring customer complaint reports
• Supports routine supply manufacture by providing on going technical support and implementing opportunities for improvement utilizing the lean six sigma tools.
• Support new product introductions to the site by assisting with machinability and qualification activities and training of technicians as required.
• Support introduction of new components/sources by assisting with machinability and qualification activities and training of technicians as required.
• Supports filing activities by developing and supporting qualification activities for equipment, process and material changes.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Bachelors or Masters in a technical field, including Chemical or Mechanical Engineering, Chemistry or Pharmaceutical Sciences
• Minimum 3 years technical experience preferably in manufacturing, oil and gas or semiconductor industries

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path
• A state-of-the-art facility that delivers solution to its customers world-wide
• Highly engaging team that aims to innovate the future

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

This is a 6 months internship

Project Details

Assist the Production Process Engineers with the following tasks:

For New Products or Prototypes :

• Acquire first hand experience with the production processes through hands-on work done under the guidance of the Technicians and Engineers
• Prepare detailed Work Instructions
• Establish Cycle Time for each process step

For current running Products that already have existing Work Instructions and Cycle Times established:

• Acquire first hand experience with the production processes through hands-on work done under the guidance of the Technicians and Engineers
• Review and verify the existing Work Instructions
• Review and verify the established Cycle Times against the actual work as well as the CT stated in SAP

Intended Learning Outcomes

• Gain first hand/ hands-on experience in the use of various hand tools and machineries, as well as manufacturing work in general
• Gain hands-on experience in the use of common Office and Engineering softwares
• Learn and understand the importance of Work Instructions and Cycle Times in ensuring good Productivity and Quality

Preferred Skillset

• Passion for engineering work (hands-on/ practical work + documentation)
• Basic knowledge of common Office and Engineering softwares (Word, Excel, Outlook, Teams, Solidworks, etc.)
• Ability to communicate in either Chinese or Malay (on top of English)

Nanyang Technological University’s ANT Group – NTU Joint Lab is a collaboration between ANT International and NTU. The partnership will explore privacy-preserving methods for large language models (LLMs) and will be overseen by a joint research committee.

We are looking for a Research Engineer II to involved in research and development collaboration with industry, on AI Safety and Trust Technology, especially on the topic of applying fully homomorphic encryption in privacy-preserving machine learning. The successful applicant is expected to be familiar with fully homomorphic encryption and its applications in AI models.

Key Responsibilities:

• Research and development of trust technologies such as privacy-preserving machine learning which are important components of digital trust platforms.
• Be involved in privacy-preserving machine learning and fully homomorphic encryption system development and implementation.
• Assist in preparation of reports and scientific papers.

Job Requirements:

• Master’s degree in computer science, mathematics, information theory or related field
• Participation in privacy, security, and trust related conferences and journals
• Good programming skill, preferably with experience in implementing cryptographic algorithms.
• Be familiar with the following programming languages: C/C++
• Good communication skill, self-motivated, and could deliver under tight schedule

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Company Profile:

Takeda's Singapore biologics manufacturing facility focuses on manufacturing potentially life-saving medicines for patients suffering from rare blood disorders such as Hemophilia A and B. As part of the company’s Biologics Operating Unit network, the site is Takeda’s only biologics drug substance manufacturing facility in Asia. The facility has two buildings, including manufacturing suites and laboratories, as well as Takeda’s first positive energy building certified by Singapore’s Building and Construction Authority’s Green Mark scheme in 2022.

About the role:

• Process Systems Engineer II is recognized within Takeda as technical subject matter expert (SME) for designated systems for the Singapore Biologics Manufacturing facility from a systems perspective.
• Process Systems engineer II is an integral member of the Singapore Process Engineering Team, he/she reports into the Process Systems Engineering Lead/Process Engineering Manager.
• Process Systems engineer II interacts closely with the Manufacturing supervisors to ensure that all Systems engineering activities are delivered to support reliable and robust manufacturing operations.
• Process Systems engineer II will be part of Process engineering organization focusing on Right First Time delivery and following industry best practices to meet the strategic needs of the Takeda Singapore Manufacturing Facility.
• Process Systems engineer II support all phases of engineering project implementation to meet scope, schedule, budget, quality, and safety requirements. This work includes preparation of scope of work documents, cost estimates, and project schedules.

How you will contribute:

• Act as system technical owner for Upstream, Downstream equipment’s and other unit operations and acting as primary engineering liaison between the system business owner and engineering.
• Lead the engineering remediation activities on designated systems (Deviations, complex Corrective Maintenance, hardware fault finding) which include generating necessary RA, Job Plans together with Engineering Operations.
• Lead Quality Event (Deviation) process and ensure timely creation, analysis and closure of events
• Lead engineering change controls to completion for designated systems.
• Provide troubleshooting support for manufacturing operations especially with regards to equipment issues
• Troubleshoot and fault find equipment’s which are not operating to expected parameters when identified and post preliminary troubleshooting by Engineering Operations
• Identify deficiencies and/or improvements in existing PMs and advise reliability engineering of same. Escalate issues to Process Engineering Lead/Manager as appropriate following initial troubleshooting if issues cannot be resolved
• Proficiency with troubleshooting of complex equipment and performing formal root cause analysis investigations.
• Own and implement projects (CAPEX/AIMP) to address Corrective Actions / Preventative Actions (CAPA) identified as part of deviation investigations, request from value stream stakeholders or GMP audits.
• Timely closure of EHS and Quality event investigation and corrective & preventive action tasks.
• Create Corrective Maintenance job plans in CMMS and change controls as needed for complex CM that has potential quality/product impact.
• Review standard operating procedures (SOPs) for process equipment maintenance and preventive maintenance (PM) checklists
• Identify and assist in procurement of spare parts required for process equipment maintenance activities.
• Participate as Process Engineering representative on cross functional support team meetings.
• Execution of activities like RV(Receipt Verification), hardware FAT/SAT & installation verification associated with equipment changes and new equipment installations.
• Review vendor turnover package documentation to ensure it meets all requirements
• Ensure materials of construction of manufacturing equipment’s are appropriate to meet process requirements.
• Manage construction activities associated with implementation of engineering projects, if required.
• Perform detailed technical designs for new equipment or changes to existing equipment through an understanding of user requirements and completion of design reviews with project stakeholders.
• Assist Validation team with execution of qualification protocols including IQ, OQ, and PQ
• Responsibility to adhere to any applicable EHS requirements.
• Commitment to a fair and respectful relationship to others and behavior in accordance with Takeda’s Code of Conduct.
• Any other duties as assigned by supervisor.

What you bring to Takeda:

Education and Experience Requirements

• Degree in Mechanical/Chemical engineering or equivalent Engineering Discipline with minimum 3 years of experience is required.
• Diploma in Mechanical/Chemical engineering or equivalent Engineering Discipline with >5 years of experience is required.
• Experience in an engineering role supporting cGMP operations in a pharmaceutical/biopharmaceutical manufacturing plant is required.
• Demonstrated mastery of technical drawings including PFDs, P&IDs, general arrangement drawings, and equipment design drawings is required.
• Knowledge of unit operations associated with cell culture and downstream processing including: media and buffer preparation, bioreactors, depth filtration, sterile filtration, single-use technologies and chromatography skids & columns
• Experience in the design and operation of biopharmaceutical manufacturing equipment and facilities.
• Experience in the management and coordination of engineering and construction management consultants, equipment vendors and contractors.
• Knowledge of ASME Bioprocessing Equipment (BPE) guidelines.
• Willing to be scheduled for call-outs during non-office hours to support manufacturing emergencies
• Experience in bio-processing engineering in a manufacturing environment is highly desirable

Key Skills and Competencies

• Ability to effectively communicate via writing and oral communication at all levels.
• Express ideas effectively in individual and group situations (including non-verbal communication).
• Ability to communicate to internal and external personnel and to communicate technical information to both technical and non-technical people
• A good understanding of design principles and standards within the biopharmaceutical facilities.
• Strong knowledge of sanitary design aspects of biopharmaceutical manufacturing equipment including Clean in Place (CIP) and Steam in Place (SIP) concepts
• Demonstrated ability to lead technical projects from concept through implementation, keeping track of costs and schedule and ensuring compliance with quality and safety standards.
• Take actions that respect the needs and contributions of others; contributing to and accepting the consensus; subordinating own objectives to the objectives of the project team.
• Supervision of contractors and trade workers is required during execution of projects.
• Ability to understand and challenge design and execution concepts from outside vendors/engineers.
• Ability to develop alternative courses of action that are based on logical assumptions, factual data and engineering principles.
• Ability to look at plant problems and come up with options for solutions.
• Gain approval for recommended solution and implement through proper channels.
• Provides solutions to a wide range of difficult problems; solutions are imaginative, thorough and practicable.
• Ability to work effectively with internal and external teams or those outside formal line of authority (e.g. peers, senior managers) to accomplish goals.
• Represents the organization in providing solutions to difficult technical problems; frequent inter-organizational and global contacts.

More about us:

At Takeda, we are transforming patient care through the development of novel specialty pharmaceuticals and best in class patient support programs. Takeda is a patient-focused company that will inspire and empower you to grow through life-changing work.

Certified as a Global Top Employer, Takeda offers stimulating careers, encourages innovation, and strives for excellence in everything we do. We foster an inclusive, collaborative workplace, in which our teams are united by an unwavering commitment to deliver Better Health and a Brighter Future to people around the world.

Empowering our people to shine:

Takeda is proud in its commitment to creating a diverse workforce and providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, parental status, national origin, age, disability, citizenship status, genetic information or characteristics, marital status, or any other characteristic protected by law.

Who we are

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

About Beca

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are a growing engineering consulting company based in Singapore, seeking for a high performing professional to join us as an Executive Engineer – Mechanical (Building Services).

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Under the supervision of Senior Engineers, to perform initial engineering task on the mechanical services detailed design for building projects
• To prepare submission to authorities for approval of design
• To attend to project meeting with Client, PM and Consultants from other disciplines
• To attend site project meeting and site inspection and respond to technical queries
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• Handle client liaison and reporting
• Liaise with authorities on plans submission and compliance

Key Requirements

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore will be an advantage
• Minimum 3 years’ experience in the design & supervision of building service projects (Those with 5 years’ experience and/or Certified Professional Engineers will be considered for a senior position).
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical Allowance
• AWS & Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Digital Trust Centre (DTC) is looking for a candidate to join them as a Research Engineer II.

Key Responsibilities:

• Conduct cutting-edge research in large language models, translating theoretical algorithms, frameworks, and methodologies into practical, working prototypes that demonstrate potential product applications.
• Collaborate closely with researchers and engineers to design and implement system architectures and software solutions that transition research findings into scalable, deployable products.
• Develop and build tools and frameworks to facilitate the transfer of LLM capabilities to industry partners, showcasing the practical value and impact of the research outcomes.
• Create and maintain comprehensive technical documentation, including white papers, presentations, and tutorials, to disseminate knowledge to a broader audience and enhance overall expertise in these emerging areas.
• Engage with international research communities and partners to stay abreast of the latest advancements in machine unlearning, contributing to discussions, collaborations, and initiatives that elevate Singapore’s position in the global AI and privacy research landscape.

Job Requirements:

• Minimum Masters’s degree in computer science/ engineering or related fields.
• Proficiency in Python is a must. Experience with other programming languages such as Java, C/C++, or Go, and frameworks like PyTorch or TensorFlow, is highly advantageous.
• Experience in developing and deploying machine learning models, particularly in natural language processing (NLP) and large language models (LLMs), including tasks such as data preprocessing, feature extraction, model training, and evaluation.
• Strong knowledge of machine learning and deep learning techniques, including knowledge graphs, machine unlearning, and AI testing.
• Proficiency in working with common Linux distributions (e.g., Ubuntu, CentOS) and familiarity with shell scripting and command-line tools.
• Experience with cloud platforms (AWS, GCP, Azure) and containerization technologies (Docker, Kubernetes) is a must.
• Experience with version control systems (e.g., Git) and collaborative development tools.
• Experience in developing ML systems from end to end, including data exploration, feature engineering, model training/evaluation will be advantageous.
• Ability to communicate complex technical concepts effectively to both technical and non-technical stakeholders, bridging the gap between research and practical application.
• Strong analytical and problem-solving skills, with a focus on developing innovative solutions for LLMs.
• Self-motivated and able to work independently, managing multiple tasks and projects in a fast-paced environment.
• Strong collaborative skills, with experience working in cross-functional teams.
• Keen attention to detail and commitment to high-quality deliverables.
• Understanding of ethical considerations and best practices in AI research, particularly concerning data privacy and security.
• Ability to code-switch effortlessly between talking business and talking tech, and can help stakeholders, engineers, and businesses easily understand difficult research tech concepts.
• Experience in AI model testing methodologies, including robustness, fairness, and explainability assessments, as well as understanding data privacy and security considerations in AI.
• Good understanding of relational database and Unix shell scripting skills.

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Responsible to lead project in ship automation related equipment design, platform equipment integration and its interface with the Ship Management System (SMS), and to platform system equipment related control and monitoring logic, which includes basic and detail design :

o SMS architecture

o Generate I/O list

o Integration of third party equipment / system with SMS

o Control console design and control panel arrangement

o Control room arrangement layout

o Platform system automation design, system control and monitoring

• Responsible for function requirement design, safety and surveillance related systems, such as:

o Propulsion control system (PCS), Power management System (PMS) function specification

o Dynamic positioning system

o CCTV system, Fire Detection System

• Review vendors technical proposal to ensure solution meets the functional requirement

• Responsible for ensuring the Contractual technical requirement and Classification requirement of automation related design are fulfilled and within project schedule.

• Liaise with client and other internal engineering trades for project coordination.

• Attend technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, technical solutions are discussed and technical issues resolved.

Knowledge and Skills:

• Knowledge of Marine Electronics and Automation systems

• Knowledge in computer networking, control instrumentation and control system design

• Knowledge of standard communication protocols like Modbus RTU/TCP, Profibus, RS422, RS485, NEMA, CANbus, J1939

• Knowledge in Autocad, Naviswork, AVEVA Marine 3D software

Requirements:

• Degree in Electrical, Automation, Mechatronic or any related engineering field

• Has 6 years working experience in Automation or Marine/offshore Industry

• Good Interpersonal Skills, problem solving skills and is a team player.

• Good time management and able to meet tight deadlines

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Project: HDB at Yishun (BTO)

Job Description:

• Provide standing supervision as and when directed by Consultant team.
• Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.
• Compile relevant equipment, material, inspection and test certificated submitted by the contractors as required for the project records.
• Ensure company's safety rule is complied with.
• Resolve all site issues and ensure timely completion of the project.
• Ensure all works are carried out in accordance to drawings and specifications.
• Attend site meetings and perform site inspections.
• Prepare weekly/monthly progress reports.
• Any other task assigned from time to time.
• Estimated commencement of work in March 2025.

Job Requirements:

• Degree in Civil/Structural Engineering from a recognized university and registered with IES/ACES as a Resident Engineer
• Minimum 3 years experiences as Resident Engineer in precast high rise residential building project.
• Experience in building projects, experience in HDB projects will be an advantage.
• Excellent interpersonal and communication skills
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Project: HDB at Geylang (BTO)

Job Description:

• Provide standing supervision as and when directed by Consultant team.
• Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.
• Compile relevant equipment, material, inspection and test certificated submitted by the contractors as required for the project records.
• Ensure company's safety rule is complied with.
• Resolve all site issues and ensure timely completion of the project.
• Ensure all works are carried out in accordance to drawings and specifications.
• Attend site meetings and perform site inspections.
• Prepare weekly/monthly progress reports.
• Any other task assigned from time to time.
• Estimated commencement of work in March 2025.

Job Requirements:

• Degree in Civil/Structural Engineering from a recognized university and registered with IES/ACES as a Resident Engineer
• Minimum 5 years experiences as Resident Engineer in precast high rise residential building project.
• Experience in building projects, experience in HDB projects will be an advantage.
• Excellent interpersonal and communication skills
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Position Overview:

As a Sr. Staff signal integrity engineer, you will be working on challenging SI and PI tasks in globally distributed teams. You will be supporting SI/PI signoff of chip design, package design and PCB design in order to support successful delivery of products of various product lines to market. You will be working with design, test, P&R and application teams globally for modeling of chip high speed I/O and power rails. You will be supporting customers in signing off hardware design or resolving SI/PI issues where system design has constraints. You will also be involved in defining specifications of product electrical performance. You may also be involved in modeling and simulation of EMC issues.

Responsibilities:

Primary (70%):

1. Responsible for SI/PI signoff of chip design, package design and PCB design.

2. Responsible for modeling high speed I/O and PDN.

3. Responsible for customer support for PCB design signoff and issue debug.

Secondary (30%):

1. Responsible for product electrical specifications related to high speed I/O.

2. Responsible for modeling and simulation of EMC issues.

Requirements:

Experience/Skills:

1. 10+ year working experience in SI/PI

2. Deep understanding in electromagnetic theory, transmission line theory and microwave theory

3. Familiar with SI/PI design flow, time domain and frequency domain modeling and simulation

4. Good comprehension of PLL, equalization, CDR, jitter, noise, IBIS modeling, 8b10b encoding

5. Hands on with lab equipment including high speed oscilloscope, spectrum analyzer and network analyzer

6. Skilled with SI/PI simulation tools from ANSYS, Cadence, Keysight and others.

7. Skilled in data processing with script in Python, Matlab or other language.

8. Experience in MIPI D-PHY, C-PHY and PAM-4 is a plus.

9. Good communication skills and team work.

10. Education: MS/PhD

Responsibilities:

• Work as part of the hull maintenance team ensuring timely delivery of vessel
• Manage and execute planned and corrective maintenance activities
• Supervise and guide workers in maintenance tasks
• Coordinate with customer, suppliers, contractors when required
• Perform basic administrative works (MS words and excel)
• Any tasks as directed by Department Head.

Requirements:

• NTC or Diploma in Mechanical or Marine Engineering or related
• Those with no prior experience will be provided with training (Classroom and on the job)
• Possess understanding of how to read 2D engineering drawings
• Able to work long hours or overtime due to exigencies of work
• Willing to work under hot, dusty, and greasy environment.
• Willing to learn with a positive mindset.
• Willing to work in Changi area.
• Only Singapore Citizens need apply

Other Information:

• Location: Changi
• Company Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5-day work week
• Working Hours: 7.45am-5pm

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards