Job Description & Requirements

• Perform general electrical maintenance including troubleshooting and repairing malfunctioning equipment.
• Identify the root cause and conduct analysis to generate solutions.
• Ensure completion of all protective maintenance duties are following the safety standards that complying with company policy.
• Install improvements and major upgrades to process system.
• Provide engineering support in project or plant maintenance
• Alert the Engineer Managers of any unusual incident that have taken place.
• Monitor the equipment process and prevent the equipment breakdown.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Requirements:

• Good interpersonal and communication skill
• Work independently
• Attention to details
• Good problem solving and observing skills

Tasks and Responsibilities

• To assist Fire Safety Manager in the implementation of protocols as per Emergency Response Procedure (ERP) to be in line and compliance with Singapore Fire Code requirements.
• To assist Fire Safety Manager in conducting relevant drills as per frequency stipulated by SCDF.
• To enforce on compliance of all Fire safety related legislations and Pollution control matters.
• To develop, plan and conduct training relevant to emergency response scenarios to all relevant staff and contractors within PaxOcean.
• To organise and conduct first aid & rescue related training to all HSE and yard staff.
• To lead appointed CERT members in firefighting, rescue and oil pollution control operations.
• To support in the administration and conduct of all other HSE related training i.e., Safety Induction Program for all staff & subcontractors.
• To be in charge of planning, inspecting, replenishing and maintenance of all emergency response equipment within HSE department Store in accordance manufacturers recommendation and/or industry best practices.
• To support and provide first aid treatment to casualties in times of emergency.
• To ensure that all fire fighting, fire suppression and rescue/ first aid equipment are maintained periodically as per manufacturer’s or Industry best practices.

Job Requirements

• At least 3-5 years of SCDF Experience on Emergency.
• NITEC or higher NITEC or equivalent and above.
• At least 3-5 years of actual front-line emergency response experience including (but not limited to) Firefighting and casualties Rescue, Confined Space Rescue, Work at Height Rescue
• Experience in leading and managing a team of responders for the mentioned emergency scenarios
• Candidates without prior experience are encouraged to apply.

In this role, you will:

• Responsible for machine wiring, troubleshooting, and performing functional checks on electrical systems in prototypes.
• Documenting activities in technical reports and also support for basic mechanical assembly.

Responsibilities:

• Wire prototype machines according to design specifications.
• Identify and troubleshoot electrical issues for prototype machine.
• Perform function check to ensure that the prototype operates as intended.
• Document activities and troubleshooting processes in technical reports.
• Provide supporting basic mechanical assembly

Requirements:

• Diploma in Electrical Engineering or Equivalent
• Able to Interpret electrical schematics, diagrams, and technical documents.
• Independent and ability to diagnose and resolve electrical problems.
• Hands-on experience with machine.
• Good time management, pro-active, self-motivated and high sense of responsibility.

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical engineering or equivalent.
3. Must have valid API 510 and API 570 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience in shell Seraya Singapore.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

Responsibilities:

• Preparation of process scheme/process flow diagram/FEED and process description
• Familiar with material and heat balance calculations and thermal rating of heat exchangers
• Development of process data sheets and able to perform NPSH/hydraulic calculation and equipment and line sizing
• Participate in Hazop Study and develop the P&ID
• Prepare material selection diagram and establish requirements for any chemicals, solvents and catalyst
• Perform relief valve sizing, control valve sizing and popping philosophy
• Prepare the equipment and line list and review the various equipment and instrument data sheets
• Interface/coordinate with other discipline for design development

Requirements:

• Degree in Chemical Engineering
• Minimum 8 years of design experience for process system in the oil and gas, chemicals storage and process environment. Candidate with more years of relevant experiences may be consider for a lead position.
• Familiar with respective code of practices for process design and fire protection such as API, NFPA, SS532, SS634 etc.
• Able to lead the process team

A Lead Automation/Systems Engineer at RoviSys will serve as a software or hardware lead on projects, as well as possess the ability to understand functional specifications and/or design specifications and translate that knowledge in the implementation of control systems. A lead engineer will be expected to develop skills required to successfully implement an entire project from both a control system software and hardware standpoint. A Lead Engineer will act as a mentor to Engineers and support training plans for Engineers.

Description of work:

• Consult with clients on digital transformation strategies within their facilities.
• Work in a team environment with engineers and designers from RoviSys, partners and clients to provide state of the art Control system to improve efficiency, product quality and profitability of process manufacturing.
• Design Electrical panels, Control Architecture and wiring drawings.
• Development of P&ID documentation for process clients.
• Define and implement programmable logic controller (PLC)/ladder design, distributed control system (DCS) configuration to meet client needs.
• Testing and on-site commissioning of control systems.
• Support of process control clients at sites in Singapore and aboard.
• Will lead team of engineers and technicians to provide control system solutions for clients.
• Will have opportunities to manage small-scale project of 1-3 people.

Control Systems Knowledge:

• Industry 4.0 applications.
• Electrical design and Process Control fundamentals.
• Familiarity with Controllers, such as single loop control, PLC, DCS or PC based control.
• IOT devices, communications protocols and connectivity.
• Exposure to Control Theory and some process understanding is helpful but not required.
• Platforms: Microsoft Windows XP/Vista/7, Rockwell Automation, Siemens, Emerson DeltaV, etc.
• Process understanding of batch or continuous process control, combustion control, etc.
• Awareness of process safety, validation and good documentation practices.
• Programming languages: PLC ladder Logic, Function Block, SFC VB, etc.
• Third-party HMI/SCADA Software, i.e. Intellution, WonderWare, OSIsoft, etc.
• Others: Network design/administration.

Qualifications:

• Self-motivated, excellent communication skills and enjoy working with people.
• B.S in Engineering, Physics and related fields.
• Min. 2 years as an Engineer with exposure to automation.

Purpose: Strategic planning and develop cost effective & low risk manufacturing/assembly process steps/planning from raw material to completion including special processes through Product Quality Plan(PQP).

Key Area of Responsibilities:

• Transfer of Project, Technology, System from customer to VDL for New product development.
• Feasibility study for New Assembly.
• Identify the facilities/supplies required for the assembly.
• Define and establish Project Plan for Assembly to meet on time delivery.
• Resolve technical issues in assembly to ensure smooth production.
• Manage technical changes to fulfill customer requirement.
• Implement improvements to processes for cost effectiveness.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical or Precision Engineering or other relevant discipline.
• Minimum 3 years of experience as a process engineer in the Contract Manufacturing industry or equivalent.
• Mechanical and electrical workmanship
• Experience in working in cleanroom will be an advantage
• Good problem-solving skills
• Proficient in Microsoft Excel functions
• Good communication skills

Purpose: The role is responsible for handling customer quality issues and continuous improvement activities of the Company products and processes. You are required to drive internal departments on quality-related issues to follow up on effective corrective/preventive actions. You will be liaising with the internal team to support QBR, RMA, IFR, MRB, FAI Review and approval with Supplier and customer, In-Process Audit, FA Launch, 8D, SDR, FPY, tracker processes, and communicate between customer and internal team on Quality related matters.

Key areas of responsibilities:

• Lead and drive customer quality CAB meetings to derive root causes and corrective and preventive actions based on 8D methodology
• Perform ad-hoc visits to customer sites to facilitate investigation and improvement proposal
• Develop, drive, and lead the improvement of manufacturing systems and processes to meet and exceed customer expectations
• Lead and drive company-wide continuous improvement projects with relevant Organizations
• Build and drive customer relationships to improve customer satisfaction
• Perform customer quality performance monitoring and reporting to internal management and customer
• Manage the first article process and submit the report to the customer for approval
• Lead cross-functional team to establish the outgoing inspection checklist for NPI to ensure that the product meets customer requirement
• Analyze customer quality performance to identify trends and improvement opportunities
• Perform manufacturing audit

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical/Manufacturing Engineering discipline
• At least 5 years of working experience, 3 years in dealing with customer quality managers or direct customer facing, related to the manufacturing environment, preferably from the semiconductor, semiconductor equipment industry, electronics, or high-tech instrument industry
• Strong knowledge and practices in 8D, SPC, FMEA, 6-sigma methodology (Certified Black/Green Belt), and change management
• Good understanding of first-article inspection requirements and expectations
• Excellent leadership and effective communicator with all levels of associates and management
• Experienced in Minitab is an advantage
• Experienced QMS auditor

Job Description & Requirements

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Precision Engineering or equivalent
• Good communication skill
• Has a passion for Engineering
• Occasional overseas travelling is required
• Fresh graduates are welcome to apply

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Degree/Diploma in Electrical Engineering or equivalent
• Min 3 years experience in machine tool or automation environment
• Experience in CNC Machinery assembly process and automation will be advantageous
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical engineering or equivalent.
3. Must have valid API 510 and API 570 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Oversee the installation, calibration, and testing of instrumentation and control systems
• Conduct functional and performance tests for instrumentation and control systems
• Identify and troubleshoot issues during commissioning and ensure timely resolution
• Collaborate with engineering and construction teams to ensure seamless integration of systems
• Prepare and maintain accurate documentation and reports related to commissioning activities
• Ensure compliance with safety standards and protocols
• Any other duties to be assigned from time to time

Pre-requsites:

• Bachelor's degree in Electrical, Instrumentation, or a related engineering field.
• Minimum 5 years of experience in commissioning instrumentation and control systems in power plant or industrial projects
• Strong knowledge of control systems, instrumentation and DCS
• Excellent troubleshooting and problem-solving skills
• Ability to work in a team environment and communicate effectively
• Project Location: Jurong Island (Transport will be provided at designated pick-up points)

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Senior Mechanical Engineer requirements:

- The project is a Power Plant at Jurong Island

- Familiar with Singapore's local technical standards, and acceptance process.

- Under the age of 35.

- Speak English

- Good health and strong safety awareness, good at communication

- Obey the Mechanical department management

- Have a qualified and valid skill certificate

- At least 5 years of mechanical work experience in Singapore, preferably as a mechanical engineer at the construction site of a Chinese company.

- Able to read Mechanical Installation drawings and guide site construction work drawings.

- Have a strong sense of responsibility, can take the initiative to work, reasonable planning, comprehensive consideration of work tasks

- Can communicate with owners, subcontractors, and other departments for permits and other works

- Able to start work on short notice will be an advantage

- Mechanical engineer with working experience in gas turbine power plant is preferred

- Adapt to our company's working hours

- Subcontractor management experience is preferred, have subcontractor management ideas

We are seeking a talented and motivated Research Engineer to join our team focused on developing cutting-edge AI models for vision inspection. This role involves leveraging state-of-the-art computer vision and machine learning techniques to solve complex manufacturing inspection challenges.

Responsibilities:

-Design, develop, and optimize AI models for image-based vision inspection tasks.

-Implement and fine-tune state-of-the-art models such as YOLO, Yolact, DeepLabV3, Vision Transformers, and others.

-Develop and maintain Python-based pipelines for data preprocessing, model training, and evaluation.

-Research and implement innovative algorithms to improve model accuracy and efficiency.

-Collaborate with cross-functional teams to understand project requirements and deliver high-quality integrated solutions.

-Document research findings, experimental results, and software implementations.

-Stay updated with the latest advancements in AI and computer vision technologies.

Job Requirements:

-Bachelor's or Master's degree in Computer Science, Electrical Engineering, or a related field.

-At least 3 years of experience

-Strong proficiency in Python programming.

-Expertise in deep learning frameworks like PyTorch (mandatory) and TensorFlow (preferred).

-Hands-on experience with computer vision models, including YOLO, Yolact, DeepLabV3, Vision Transformers, etc.

-Familiarity with image processing techniques and libraries such as OpenCV.

-Strong problem-solving and analytical skills.

-Strong communication and excellent writing skills

-Have a strong work ethic, and able to work on own initiative.

-Team player, communicate efficiently, be flexible and details oriented.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

• Under direct supervision, applies functional requirements and uses engineering tools to design electronic circuits or control systems for product changes or new developments
• Uses software tools or applications to analyze and conduct tests on electronic circuits or systems and document performance in comparison with design criteria
• Identifies the testing objectives at a component level per Halliburton's Health, Safety, and Environment procedures and evaluates test results
• Assists in preparing component specifications, follows work processes to document designs, and assists in the preparation of material for design reviews
• Collaborates with mentors to understand the basic content required to submit an invention disclosure and recognizes ideas that have IP potential without disclosing confidential information
• Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions. Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standardsResponsibilities:
• Under direct supervision, applies functional requirements and uses engineering tools to design electronic circuits or control systems for product changes or new development
• Uses software tools or applications to analyze and conduct tests on electronic circuits or systems and document performance in comparison with design criteria
• Identifies the testing objectives at a component level in accordance with Halliburton’s Health, Safety, and Environment procedures and evaluates test results
• Assists in preparing component specifications, follows work processes to document designs, and assists in preparation of material for design reviews
• Collaborates with mentors to understand the basic content required to submit an invention disclosure, and recognizes ideas that have IP potential without disclosing confidential information
• Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions
• Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standards

Key Responsibilities:

• Design, simulation, and implementation of high-temperature electronic systems, encompassing component selection, qualification, and PCB assembly practices
• Functional and qualification testing of the designed PCB boards and sub-assemblies
• Preparation of technical reports and presentations

Requirements:

• Skills acquired through the completion of an undergraduate degree in Electrical Engineering or similar discipline.
• Basic knowledge of various filters, amplifier topologies, and architecture
• Ability to perform simulations to verify designs.
• Basic knowledge of ADC, DAC, LDO, and switching power supply topologies.
• Working knowledge in commonly used circuit simulators, such as LTSPICE, etc.
• Experience in using lab equipment, such as oscilloscope, etc
• Experience in common PCB design CAD tools, such as Siemens PADS, is an advantage
• Experience in MATLAB and LABVIEW is an advantage

Candidates that exceed the minimum job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, job opportunities might be available for the Senior Electrical Engineer role

At Asia MatteLab, we’re on a mission to empower researchers with the tools they need for groundbreaking discoveries. We connect the world’s best scientific equipment with researchers across Singapore and APAC. Now, we’re looking for a passionate and driven Sales Engineer to join our growing team and make an impact!

Why You’ll Love This Role:

• Hands-On Experience: You’ll get to dive deep into the world of cutting-edge lab equipment and scientific tools.
• Growth Opportunities: Start as a Sales Engineer, and with your performance, you could be leading your own sales team in no time. And regional role is available.
• Flexible Schedule: We believe in work-life balance—own your time as long as you hit your goals.
• Exciting Fieldwork: Meet new people, visit different labs, and build lasting relationships with researchers across the region.

What You’ll Do:

• Be the Solutions Expert: Understand and present our lab equipment, helping researchers find the right solutions to advance their work.
• Meet & Build Relationships: Spend most of your time out in the field, meeting with researchers and building strong, lasting connections.
• Drive Sales Growth: Create smart strategies to introduce our products to new clients, expand our market reach, and exceed sales targets.
• Collaborate & Support: Work closely with our suppliers and customers, ensuring you’re the go-to person for any questions or opportunities.
• Lead the Charge: As you grow, you’ll have the chance to take on leadership responsibilities, potentially managing your own team.

Who You Are:

• A People Person: You love connecting with new people and building relationships that last.
• A Go-Getter: You’re driven, proactive, and always looking for the next opportunity to grow.
• A Problem Solver: You enjoy understanding client needs and providing solutions that truly make a difference.
• An Independent Worker: You thrive in an environment where you can manage your own schedule and take ownership of your work.
• A Quick Learner: You’re excited about learning new technologies and products and sharing that knowledge with others.

Qualifications:

• Diploma or Degree in Materials Science, Biotechnology, Life Sciences, Chemistry, Engineering, or related fields.
• 2+ years of experience in laboratory analytical equipment sales
• Strong communication skills and the ability to build rapport with clients.
• A passion for helping researchers achieve their goals through the right tools.

What’s In It For You:

• Competitive Salary: Your hard work will be rewarded with a great compensation package.
• Clear Career Path: Grow into a leadership role as the company expands.
• Training & Travel: Learn continuously through training programs and travel opportunities to meet clients and partners.
• A Dynamic Work Environment: Enjoy a vibrant, fast-paced, five-day workweek with a fun and supportive team.

Ready to Be the Driving Force Behind Scientific Progress?

If you’re ready to take on an exciting role where you’ll learn, grow, and make a real impact, we want to hear from you! Send your resume and expected salary to [email protected]. Only shortlisted candidates will be contacted, but don’t miss out—this could be the start of an amazing journey!

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

The Digital Supply Chain Group of the Resilient Value Chain Division at ARTC is searching for a Senior Research Engineer to lead and support engineering projects focused on operations research using advanced analytics, simulations, and optimization.

Responsibilities:

Innovate and Develop New Solutions:

Design and prototype novel algorithms, tools, and systems to solve complex operational and industrial challenges.

Conduct research and feasibility studies to create innovative, scalable, and efficient engineering solutions that meet industry needs.

Lead the Development Process:

Lead end-to-end development of research concepts into functional engineering prototypes, ensuring they are industry-ready.

Collaborate with cross-functional teams to transition research results into tangible, deployable products or solutions.

Apply Advanced Research in Engineering:

Leverage cutting-edge technologies such as simulations (discrete-event & agent-based), network analysis, and optimization techniques to develop solutions.

Implement machine learning and AI technologies into operational processes to enhance decision-making capabilities.

Conduct Performance Testing and Optimization:

Evaluate the performance and scalability of developed solutions through testing and optimization.

Continuously improve prototypes by analyzing performance data and making necessary adjustments.

Collaborate with Industry Partners:

Work closely with industry partners to ensure that developed solutions align with real-world applications and requirements.

Engage with stakeholders to gather feedback and refine research prototypes for successful industry adoption.

Job Requirements:

• Bachelor or Master Degree in Engineering, Computer Science, Operations Research, or related fields.
• At least 3 years of experience
• Strong foundation in mathematical modeling, algorithm design, and scientific computing.
• Expertise in simulations (discrete-event, agent-based) and optimization techniques.
• Proficiency in programming languages such as Python, C, C++, or MATLAB.
• Familiarity with machine learning frameworks (e.g., TensorFlow, PyTorch, Scikit-learn) and optimization libraries (e.g., Gurobi, CPLEX).
• Experience in data structures, algorithm development, and software development best practices.
• Prior experience in operational optimization, such as fleet management, scheduling, or network design, is highly preferred.
• Experience applying research in practical settings such as aerospace, logistics, energy, manufacturing, or supply chain management.
• Familiarity with Industry 4.0 technologies such as advanced robotics, automation, or smart manufacturing.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

About Us

VFlowTech (VFT) is reinventing energy storage with Vanadium redox flow technology, with a vision to develop the cheapest and most scalable Vanadium redox flow batteries in the world. VFT storage solution has an expected life span of 25 years and is proven to be one of the safest and most environmentally friendly battery technologies. VFT founders have deep experience in the renewable space, and Vanadium redox flow technology. VFT is a spin-off of the CleanTech lab of Nanyang Technological University (NTU), Singapore, and benefits from unique IP arising from many years of intensive research at NTU.

Job Responsibilities

• Develop and conduct research in development of high-power density vanadium redox flow battery stack by designing flow fields, manifolds, material treatment etc.
• Design, model, simulate, test, and characterize vanadium redox flow battery stacks of various sizes.
• Perform material and electrochemical characterization (both in-situ and ex-situ techniques such as cell cycling, CV, EIS, segmented cell, polarization tests, pH tracing, spectroscopy, XRD, through plane/ in plane resistivity, etc.) to reduce the stack resistivity and improve the capability to operate at high current density.
• Project management including project planning, progress tracking, manage resources, and work together with interns, research staffs and international collaborators.
• Develop IPs and Publish in high quality journals.

The work requires an in-depth understanding of electrochemistry of flow batteries, simulation/modelling skills, material fabrication, material characterization tools, and engineering integration of various components of vanadium redox flow battery stacks. The candidate should be able to work on dynamic, product-oriented group and manage the multiple tasks independently. Passion for research and multitasking abilities makes you the head of research group at VFlowTech with additional benefits.

Job Requirements

• Bachelor, Master’s Degree or PhD in Power Electronics, Renewable Energy, or relevant faculty.
• Knowledge about solar/photovoltaic (PV), wind, or fuel cell power generation systems.
• Knowledge of microgrid systems and their interactions with distribution systems.
• Experience in hardware-in-loop modeling and simulations.
• Knowledge of different microgrid control architectures, different control modes of inverter-based resources, droop controls, consensus algorithms and their applications on microgrid load power sharing and voltage regulation.
• Experience in analyzing and modeling the dyanamics of a diversity of distributed energy and emerging grid resources (solar, wind turbine, small hydros, microturbines, energy storage, electric vehicle charging, power flow controller, etc.)
• Ability to provide engineering specifications and electrical drawings, to conduct field testing and troubleshooting.
• Extensive knowledge of industry standards, and government regulations.

Desired Skills and Experiences

Power Generation, Cell, Troubleshooting, Written English, Modeling, Electrical, Estimates, Structural Engineering, Simulations, Renewable Energy, API, FEED, Soil, Manufacturing, Electronics, Design Management

Your benefits

· Receive support in your own self-development (regular feedback and coaching sessions, access to personal development material, workshops, start-up presentations, and networking events)

· Make key decisions that impact the future of the company

· Enjoy regular team lunches and social events

· A secured employment in a constantly growing company and a future-proof industry with a multitude of personal development opportunities

· Work in an environmentally conscious company - we see climate action as a responsibility

· Competitive remuneration package

· Dental and Medical Benefits

Our company culture

Our team is diverse, international and shares the drive to make a difference and create change.

· We encourage our team to bring in their ideas and take initiatives that make them proud of

· We foster a rapidly scaling working environment with a very entrepreneurial, innovative and collaborative culture

• Marine & Offshore industry
• Basic up to $7k + yearly bonus
• 5 days
• Working location: Jurong area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Electrical Design: Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• System Optimization and Performance Enhancement: Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Documentation and Reporting: Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Regulatory Compliance and Safety: Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.

Requirements

• Min Diploma in Electrical Engineering or related.
• Min 3 years of experience in Electrical Design in Marine/ Automation/ Automotive industry.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience
• Experience / knowledge in CMOS Image Sensor and Image Signal Processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

JOB DESCRIPTION

• CP test program development.
• Work with designer to develop test programs, debug programs, solve problems.
• Work with commissioned factory to identify, propose, prioritize and implement test automations.
• Design automated test scenarios accordingly to test plan with its acceptance criteria
• The commissioned testing factory product management.
• Test plant test plan management. Ex: prepare test environment, test data, update functional test scripts according to changing requirements
• Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency
• Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

• Bachelor’s/ Master’s degree in Electronical Engineering ,Computer Science, Software Engineering or other equivalent degree/experience
• Strong VBT scripting skill and C++ programming background
• Good written and verbal communication skills in English and Mandarin is required to liaise with Chinese associates/clients
• Able to work well both independently as well as in a team
• Singaporeans are welcome to apply

Purpose of Role:

This person is responsible for ship electrical detail design activities and able to process basic design information to expand the function design into production information for the marine vessel.

This role shall perform engineering of electrical and navigation equipment to the related platform equipment, as well to interface with Ship Management System (SMS). The scope includes :

o Main Power generation and distribution system network and architecture

o Integrated electric propulsion systems, Power management systems

o Engineering integration between ship equipment / Ship Monitoring system with Electrical power generation

o Electrical fittings, equipment and panel arrangement

o Preparation of equipment connection and cable schedules

o Electrical design calculation

Responsibilities:

• Responsible for vessel electrical system detail design in accordance with Marine Classification and regulatory, as well as IMO/Solas

• Review vendors technical proposal to ensure solution meets the functional requirement

• Responsible for ensuring the Contractual technical requirement and Classification requirement of automation related design are fulfilled and within project schedule.

• Liaise with client and other internal engineering trades for project coordination.

• Attend technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, technical solutions are discussed and technical issues resolved.

Knowledge and Skills:

• Knowledge of Marine Electrical and Automation systems

• Knowledge in Autocad, Naviswork, ETAP and CADCAM 3D software will be advantageous

Requirements:

• 3 years of related experience in Ship design related engineering industries such as Marine & Offshore
• Degree in Electrical, Automation, Mechatronic or any related engineering field
• Good Interpersonal Skills, Problem-Solving skills and is a team player.
• Good time management and able to meet tight deadlines.

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm