Job Scope :

- To install a highly automated high vacuum CVD/PVD systems in a cleanroom environment at customer site.

- Assist in any system upgrade work at customer site at short notice.

- Support system warranty standby as plan out by Lead Engineer.

- Report promptly on the development of his fieldwork or system issues faced to Lead Engineer with clear and precise information.

- Active participation in meetings and conference call as necessary

- Other ad hoc duties

Requirements:

- Diploma / Degree in Engineering or equivalent.

- 1 - 2 years’ of relevant experience

- Fresh graduates without experience are welcome

- Experience in equipment installation in a cleanroom environment

- Excellent troubleshooting capabilities

- Knowledge of PLC

- Able to work independently with minimum supervision

- Able to commit to OT when necessary

- Able to travel for work regionally

- Perm position

About the Role:

A team member of RRC (Regional Repair Center) and will be responsible to perform repair of medical endoscopes in RRC. He is also responsible to strictly adhered to the process, safety and quality standards required to repair medical equipment. He also has responsibility to maintain the proper condition of repair workbench as assigned.

Roles and responsibilities:

· Perform repair of medical endoscopes

· Carry out workshop maintenance task assignments

· Ensure compliance with GDPMDS requirements at all times

· Perform 5S in individual and scope repair areas at all times

· Any other duties as assigned

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

· A competitive salary package including AWS and Variable Bonus

· 18 days of annual leave in your first year

· Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

· Diploma or ITE in Engineering / Biomedical Engineering

· More than 3 years of Medical Equipment service provision

· Personality: Team Player, meticulous and organized

· Traits: Steady hands and keen eyes to handle delicate components

· Electrical & Mechanical soldering skills

· Require critical thinking and problem solving skills

· Good with Microsoft Office

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Responsibilities:

- Responsible for daily basis service work and handling new installation projects and testing commissions for air-cooled and water-cooled chiller.

- Routine servicing of Commercial Chillers (Air-cooled & Water-cooled chillers) onsite.

- Routine duties includes maintenance, troubleshooting and repair to commercial chillers, AHU, FCU, VRV CRAC, VRV Systems, including tear down and rebuild (overhauling).

- Able to read specifications and drawings by contractors.

- Inspecting and testing systems to verify system compliance with plans and specifications and to detect/locate malfunctions.

- Organise and keep up with records and report all faults, deficiencies and other unusual occurrences, as well as the time and materials expended on work orders.

- Responsible for adjusting system controls to settings recommended by manufacturer to balance systems handling for all types of refrigerant.

Requirements:

- Diploma/Degree in Mechanical Engineering

- Minimum 2 years of technical experience with knowledge in air-conditioning, Chiller, ACMV or HVAC systems

- Resourceful with good analytical and interpersonal skills

- Strong communication skills

- Good team player with ability to lead and multi-task

- Possess Class 3 driving license will be an added advantage

Mon to Fri - 8am to 5.30pm

We provide Products & Services to the Oil & Gas, Petrol-Chemical, Chemical, Power & Utilities Industries. We are looking to fill up the position of 'Sales & Service Engineer'.

Job Responsibilities:

A. Sales Functions:

• To visit and provide Sales support to all after-market customers in Singapore territories and East/West Malaysia

B. Service Functions:

• Commissioning of equipment, co-ordinations of installations of equipment, troubleshooting and technical support to customers and in-house executions.
• To write technical reports after service jobs are completed.

Job Requirements:

• Degree / Diploma in Engineering/ Technical Subjects, are preferred or equivalent.
• Salary will be commensurate based on experience and qualification
• Candidates with Sales Experience will be an advantage. Those without Sales Experience and with a good Sales attitude are to be considered.
• Candidates with Project Coordination Skills will be an advantage.
• Applicant MUST hold a valid Class 3 driving license
• Salary Package consisting of Monthly Salary & Sales Commission.
• Candidates who seek to be Professional Sales Engineers, willing to work hard and honest, will be the most suitable person to fill in this position.
• We do not provide Work Pass
• Junior and Senior position levels are available

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Customer Service Engineer to be part of their Engineering Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Customer Service Engineer:

• Provide technical support to customers and contractors, addressing product and application-related queries.
• Perform on-site measurements and system evaluations to identify opportunities for improvement and optimization.
• Conduct technical training sessions for stakeholders.
• Assist in product quality control through thorough testing and analysis.
• Handle additional assignments as required, showcasing flexibility and adaptability.

Requirements:

• Diploma or Degree in Engineering Discipline or similar field
• Relevent experience
• Experience with Building Management Systems (BMS)
• Possess valid Class 3 Driving License is an added advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Role:

• Diagnose and troubleshoot problems with Marine Boilers.
• Carry out repairs on inboard and outboard marine boilers.
• Perform routine maintenance to ensure all shipboard systems are functioning properly.
• Travel domestically and internationally to service jobs on board vessels.
• Maintain cleanliness of the ship and engine room while onboard.
• Provide detailed reports on work performed and communicate the nature of repairs and services to customers.

Safety and Compliance:

• Follow all safety protocols and regulations to maintain a safe working environment.
• Ensure compliance with environmental regulations related to marine services and repairs.

Documentation and Reporting:

• Keep accurate records of all services performed, including time spent, parts used, and labor involved.
• Use service management software to log and track repairs and maintenance tasks.

Team Collaboration:

• Collaborate with other technicians and service team members to ensure efficient workflow and high levels of customer satisfaction.
• Assist in training and mentoring junior technicians as required.
• Perform any other duties as assigned.

Requirements:

• Diploma or equivalent; technical certification or associate degree in marine mechanics or a related field is preferred.
• Minimum of 2 years’ experience in marine service and repair for boilers.
• Strong mechanical skills and ability to solve problems.
• Proficient in using diagnostic tools and marine service equipment.
• Knowledge of marine engines, auxiliary engines, and cargo pumps.
• Ability to read and understand technical manuals and schematics.
• Capable of lifting heavy objects, working in various weather conditions, and performing physically demanding tasks.

As a Service Engineer, you have to attend to equipment fault at customers’ premises. Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities. Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met. Also to ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault. To carry out periodic maintenance for our customers.

You should possess a Diploma in Electronics and/or Electrical Engineering with 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc. With good interpersonal communication skills and a valid Class 3 license. Stand-by duty is required.

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Job Description & Major Responsibilities

Service Engineers install, service, support, upgrade and maintain SCREEN equipment. Training is provided to support multiple equipment types. They perform a variety of moderate to complex assignments, diagnose equipment problems and make repairs or adjustments. Understand system parameters and interactions to allow process development and extensive electronic-mechanical troubleshooting on the equipment.

Being a Service Engineer, this person is to support the team in meeting customers’ expectations and company’s expectations. This person must be able to support machines and technically inclined. He is the direct support on machines at customers’ fab and the workforce to ensure customer satisfaction amongst our customers.

· To attend weekly meeting and presentation

· To write technical report

· To handle specific jigs during service jobs

· Assist senior colleagues to perform higher-level job like robot teaching & sub-units

· To perform 24x7 standby duties based on roster

· To perform ad-hoc shift work when needed when required.

· To perform ad-hoc delivery work

Desired Qualifications / Requirements / Competencies:

· Diploma in Electronics/Electrical /Microelectronics Engineering. Might consider ITE with experience

· Cleanroom working experience preferable but not a must

· Machine setup/installation/modification/servicing/trouble shooting/repair

· Willing to travel occasionally

· Able to work irregular hours when required

· Fresh graduates will be considered

· Proficient in Microsoft Office programs

· Demonstrate ability to work effectively with team members and customers

· Excellent troubleshooting and repair skills

· Require good communication skills, documentation and customer service skills

Responsibilities

· Support daily operation on troubleshooting and repair of equipment related issues

· Attend to breakdown repair and recovery of operational equipments.

· Carry out preventive maintenance, calibration and corrective repair works on a timely basis

· Reduce equipment downtime and enhance equipment performance through quality maintenance works.

· Proper recording of works carried out on equipments.

· Troubleshoot and rectify electrical and mechanical system faults on equipments.

· Drive improvements in equipment, product quality, productivity and safety.

· Improve machine performance and efficiency by providing effective troubleshooting, maintenance and engineering support for operations.

· Support projects such as machine upgrading, software/hardware changes, etc.

· Assist customers with queries, provide information to help what customers want or need to order, recommend items.

· Assist with customer complaints and problems. Resolve enquiries. Process refunds for customers.

· Support daily distribution operations. Assist deliveries in replenishment of company products.

· Meet set productivity and goals. Work to improve and increase customer satisfaction.

Requirements

· Possess Diploma, NITEC, NTC-2 or ITC Mechatronic Engineering is preferred

· 2-3 years' relevant experience in automation systems and hands-on technical experience.

· Basic knowledge of PLC and electrical system

· Good communication and interpersonal skills.

· Meticulous and result oriented.

· Able to multi-task and work under tight timeline.

· Good team player but able to work independently.

· Willingness to learn, self-motivated, possess a can-do and positive attitude.

· Resourceful in seeking out methods/solutions to solve problems and achieve targets.

Job Description

• Industry/ Organization Type: Marine Maintenance/Services
• Position Title: Service Engineer
• Working Location: Islandwide
• Working Hours: Flexible – must be on standby 24/7 to respond to client calls
• Salary Package: Up to $4,500 +OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform diagnostics, maintenance, and repair work on DF engines and other marine propulsion systems.
• Conduct routine inspections and troubleshoot engine issues to minimize downtime.
• Provide technical support and expertise to clients, ensuring optimal engine performance.
• Collaborate with the engineering team to develop and implement maintenance strategies.
• Prepare detailed service reports and documentation for all completed work.
• Ensure compliance with safety regulations and industry standards during all service activities.
• Travel to client sites as required to perform on-site maintenance and repairs.

APPLY NOW!!!

• At least a Diploma in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.
• Minimum of 2 years of experience in engine repairs and maintenance, preferably within the marine industry.
• Experience with DF engines is highly preferred.
• Able to travel to client sites as needed, sometimes on short notice.
• The position requires flexibility in working hours, as the engineer must be on standby 24/7 to respond to client calls.
• Ability to work in varying environments and under pressure to resolve issues promptly.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68647 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

- To report to Head of the Department for daily job assignments.

- Carry out inspection, installation, testing, commissioning, servicing, maintenance and troubleshooting for the assigned jobs that include but not limited to:

· Electrical works

· PLC Controllers/Modules

· BMS/SCADA

· HMI

· A/C Works

- Provide internal & external trainings on electrical controls, electrical troubleshooting, PLC program writing & troubleshooting, control panel assembly and basic electrical theory.

- Produce Progress Tracking Report (PTR) for assigned jobs.

- Report and communicate with customers and Oceanmaster PIC the technical issues, status, progress and recommendations of the assigned job.

- Submit to Operations Administrator an accurate and duly signed & stamped Timesheets, Work Reports, Commissioning Checklists (if any) and Customer Satisfaction Survey Forms on every completion of assigned job.

- Produce Close-Out Report after completion of the assigned job.

- Comply with quality of work requirements of OceanMaster at all times.

- Comply with protection of environment and health & safety policies of OceanMaster at all times.

- Adhere to no wastage policy of OceanMaster in terms of materials and labour to assigned jobs at all times.

- All other duties assigned by the Managements as and when necessary.

Requirements

- Graduate of Electrical Engineering or Electronics Engineering (Bachelor’s Degree)

- Minimum 5 year experience in Marine Electrical field

- Minimum 3 year experience in Instrumentations and PLC handling and installation

- Proficient in Electrical, instrumentation and/or Electronics troubleshooting

- Proficient in written and oral English communication skill

- Proficient in material take off and labour estimate for a given Electrical project

- Proficient on electrical circuit diagram design

- Good knowledge on ladder logic programming

- Good grasp on technical writing

- Good leadership, coaching and analytical skills

- Able to work independently

- Team player

- Knowledge on Project Schedule Software or Autocad is an advantage

We are located at 11A Tech Park Crescent Singapore 637842 (Tuas South).

Requirements

• Must have Refrigeration knowledge or experience.
• Min 2 - 5 years working experience in the field of Industrial cooling, industrial refrigeration, electrical, mechanical as well as electronic skill.
• Candidate must possess at least a ITE Certificate / Diploma in Electrical / Electronic or other equivalent qualification.

Job Description

• Mainly in house chiller repair.
• Service and maintenance on site, installation and commissioning if willing to learn, training will be provided.
• Respond and attend calls from clients.
• Responsibility of all other service tasks as assign.
• Perform ad hoc duties as assigned by Manager / Supervisor.
• Able to work independently.
• Willing to learn, training will be provided by way of training in our HQ Germany or Subsidiary Office in China or on-the-job training.
• travel allowance given if willing to travel overseas for service jobs.

Job Description

• Industry/ Organization Type: Marine Maintenance/Services
• Position Title: Service Engineer
• Working Location: Islandwide
• Working Hours: Flexible – must be on standby 24/7 to respond to client calls
• Salary Package: Up to $4,500 +OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform diagnostics, maintenance, and repair work on DF engines and other marine propulsion systems.
• Conduct routine inspections and troubleshoot engine issues to minimize downtime.
• Provide technical support and expertise to clients, ensuring optimal engine performance.
• Collaborate with the engineering team to develop and implement maintenance strategies.
• Prepare detailed service reports and documentation for all completed work.
• Ensure compliance with safety regulations and industry standards during all service activities.
• Travel to client sites as required to perform on-site maintenance and repairs.

APPLY NOW!!!

• At least a Diploma in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.
• Minimum of 2 years of experience in engine repairs and maintenance, preferably within the marine industry.
• Experience with DF engines is highly preferred.
• Able to travel to client sites as needed, sometimes on short notice.
• The position requires flexibility in working hours, as the engineer must be on standby 24/7 to respond to client calls.
• Ability to work in varying environments and under pressure to resolve issues promptly.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68647 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Overview

Manage the installation, maintenance and troubleshooting of chilled water and direct-expansion (DX) type HVAC equipment. Knowledgeable with HVAC market trends and understands what motivates customers to engage our services.

Responsibilities of Role

• Manage and lead team to install chilled water and direct-expansion (DX) type HVAC equipment. Perform testing and commissioning of equipment and system after.
• Able to carry out preventive maintenance of chilled water equipment such as air and water cooled chillers, cooling towers, and fluid pumps. Proficient in troubleshooting breakdowns and carry out repairs where necessary.
• Able to carry out preventive maintenance of direct-expansion (DX) type equipment such as single, multi-split, and VRF DX units as well as air and water cooled package units. Proficient in troubleshooting breakdowns and carry out repairs where necessary.

Skills and Proficiencies Wanted

• Exceptional interpersonal skills with the ability to build genuine relationships with internal team members and customers.
• Fine decision making, possess good problem solving and project management abilities.
• Willing to travel to meet partners.
• Appreciation of Microsoft Office Word, Excel, PowerPoint, AutoCAD.

Preferences

• 5 years working experience in the HVAC industry.
• Possess a valid driver’s license and owns a vehicle.
• Diploma or Bachelor’s degree in Engineering, or National ITE Certificate (Nitec) in relevant disciplines.

Job Description:

Technical Tasks:

• Performs installation & provides basic technical training when neccessary (Mainly Workplace infrastructure - WPI products: Medical Pendents & Lights / Gas Management solutions)
• Perform related upgrades / Technical Service Bulletin from factory instructions to ensure devices / equipment are up to date.

Service Operational Tasks:

• Escalate quality-related situation, market dynamics and issues from field to the Service management in his country
• Monitor and drive completion of monthly maintenance tasks and paperwork for assigned customers’ accounts

Service Commercial-related Tasks:

• Makes constant efforts for contract development and implementation of Service programs
• Any other additional duties deemed appropriate by Service Manager

Job Requirements:

• Minimum Nitec in Engineering/Electronics or Equivalent
• 2-3 years of technical experience preferable in after sales support in medical industry, or Workplace Infrastructure related secto

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Overview

We are seeking bright and friendly individuals with excellent communication skills, willingness to learn and apply new technology and a track record for providing great customer service. You will have opportunities to work in a variety of challenging IT environments to quickly build up your IT and communication skills.

What will you be doing?

As a Senior Service Engineer, you provide Level 1 and Level 2 Support to existing clients, serve as a primary contact to identify, troubleshoot and to provide resolutions to the reported issues. Your job is to work closely with R&D Team by conducting preliminary investigations i.e., replicating the reported issues raised and communicate to the support software engineers and Quality assurance engineers of your findings to facilitate in bug fixing.

Your responsibilities will include:

• Being a representative for project-specific customer inquiries and issues that you will take ownership and bring resolution.
• Ensure customer satisfaction in Project Support and Maintenance
• Collect information and perform deep-dive analysis, diagnosis, and troubleshoot.
• Commit to SLA for response and resolution, troubleshoot and perform root cause analysis of technical issues
• Communicate efficiently with the customer and the Internal R&D team on the bug fixes needed.
• Manages the status of issues raised and ensure they are resolved effectively in a timely manner.
• Continually evaluate existing processes to streamline and enhance customer support activities.
• Manage and keep tracks of change requests, bug fixes status and system updates deployments documentations.
• Prepare weekly statistic reports and able to present professionally in the weekly progress meetings with clients.
• Prepare and keep track of user manuals documentation and versions as well as release notes for upcoming enhancement releases.
• Conduct training / hand-holding sessions with users and to guide them to troubleshoot the system to resolve software issues or problems.

OK, I’m interested… is this the job for me?

We look for people who value agility, passion and teamwork; those who can bring fresh ideas to the table and want the opportunity to learn, grow, and expand their careers. Bring your aptitude and build upon what you do best for our customers, partners, team, and you.

Other qualities that you’ll need to be a fit for this role include:

• Degree in Information Technology/Computer Science/ Computer Engineering
• Preferably > 1 year experience in IT Industry managing large-scale applications support
• Pro-active, customer-focused, and comfortable dealing with clients/vendors directly.
• Excellent communication skills and the ability to interact professionally with a diverse group, executives, managers, and subject matter experts.
• Highly energetic, motivated team player, able to work under tight timelines and pressure to participate in digital transformation journey
• Good interpersonal skills, resourceful, take ownership
• Organized, meticulous, and able to work independently
• Strong analytical and troubleshooting skills
• Delivered B2B services effectively and efficiently, aware of service management preferred.
• Preference given to vendor–based software delivery experiences.
• Experience in Software Development and Microsoft SQL Server will be an advantage

• Well Established Company
• Basic $ 2800 to $ 4500 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• TRAINING will be provided for candidate without / with lesser experience

Job Responsibilities:

• Assist in troubleshooting, servicing, and calibrating control valves and field instruments, both on-site and in-house under the guidance of senior engineers (troubleshooting & service)
• Support the execution of periodic, predictive, and preventive maintenance services, as well as repairs and overhauls of control valves and associated systems (maintenance & repair)
• Assist in the installation, calibration, and testing of control valves, actuators, and related instrumentation (installation & calibration)
• Support the supervision of subcontractors in performing maintenance and servicing work to meet company standards (sub-contractor support)
• Record servicing, maintenance, and calibration data; generate reports and support senior engineers in reviewing and finalizing service documentation (reporting & documentation)

Requirements:

• NITEC / ITC / Diploma in Mechanical Engineering or Mechatronics Engineering or equivalent
• Training will be provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Assistant Service Engineer / Service Engineer

• Salary: $2000- $3500
• Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
• Working Hours: 8.15am - 5.45pm
• Working Days: 5 Days [Monday - Friday]

Job Description:

• Must be able to perform troubleshooting on various electrical circuitry
• Engine and hydraulic knowledge with 2 years working experience in automobile industry (Electrical & Mechatronics) will be an advantage
• Assist Service Manager to manage the service department
• Able to lead a team of technicians and engineers to provide excellent service support

Requirements:

• Minimum Diploma in electrical and electronic or mechatronics engineering
• Posses Class 3
• Min 3 yrs experience

Tee Xin Li Reg No: R24121619

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

General information

As a Service Engineer, you will be responsible for executing Service work with low to medium complexity according to work instructions and in accordance with ABB standard processes, quality standards and safety guidelines.

Reporting to Service Manager, you will be delivering quality customer service to satisfy customers. In close co-operation with customer and other ABB teams, take actions to identify new Service business opportunities for ABB.

Health and Safety

• Apply safety rules and safe practices as well as environmental responsibilities
• Report unsafe practices and incidents

Service Delivery

• Execute after sales business activity preventive & condition based maintenance, trouble-shooting, repairs and commissioning.
• Actively coordinate with operation supervisors for optimal service potentials from regular customer interactions.
• Proactively involve in self learning and practical exposure for continuous competence and productivity improvement.
• Maintain high level of personal leadership on safety and quality on work performed as well as documentations.
• Reports early any technical/contract/quality/program/cost issues to management, along with recommendations for resolution.

Additional Requirement

• Understand customer needs & manage customer relationships
• Co-operate actively with other ABB units to achieve common targets
• Support sales team

Leadership

• Provide leadership and coordination for the service team
• Create and develop good team spirit

Continuous improvement

• Proactively identify area of improvement eg. Self-technical knowledge, job safety and etc
• Participate in discussion, meeting, training and e-learning

Your background

• Diploma, ITC or equivalent in Electrical/Electronics engineering with at least 3 years hands on repair and service experience on electrical equipment.
• Experience on LV & MV VFD will be an advantage
• Strong electrical or electronics engineering fundamental knowledge. Knowledge on theory, structure, application, testing methodology and component fault diagnosis/analysis will be added advantage.
• Strong self-discipline with initiative and learning spirit with positive attitude, team work and responsibility.

Job Summary:

• As a Service Engineer, you will play a critical role in maintaining the operational efficiency of our equipment.
• Your expertise will ensure that our services remain top-notch, directly impacting our client satisfaction and operational success.

Key Responsibilities:

• Conduct periodic inspections, repair, service and maintenance of Musasino equipment to ensure reliable operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.

Job Requirements:

• Fresher or related marine engineer experience are welcome.
• A minimum of a Diploma in Engineering (Electrical, Electronics, Mechanical, Mechatronics) or equivalent educational background.
• Ability to work overtime and weekends when required.
• Willingness to travel overseas for an assignment as required.
• Ability to work independently and under pressure, delivering quality results within tight schedules.
• Team player.

Highlights:

• Gross Salary: S$3000 to S$4000/ month
• Working Day: 5 days
• Working Hour: 8am to 5pm
• Overtime paid when working outside of working hours (include Weekend/ Public Holiday)
• Dental and Medical Benefits
• AWS

• Be part of advanced technologies and solutions for power solutions.
• Be exposed to cutting-edge technologies and solutions.

About Our Client

The company provides cutting-edge tools such as battery monitoring systems, power grid monitoring solutions, and maintenance technologies designed to enhance the reliability, efficiency, and performance of utility grids and backup power systems. Serving industries such as data centers, utilities, telecommunications, transportation, and healthcare, the company enables customers to implement condition-based maintenance, ensure regulatory compliance, and extend asset lifespans.

Job Description

Key Responsibilities

• Provide technical service and support for products.
• Perform testing and commissioning, including site acceptance tests in collaboration with consultants and end-users.
• Diagnose and troubleshoot issues in customer installations and products.
• Maintain and execute service agreements with customers, ensuring adherence to contractual service levels.
• Provide guidance and expertise during new product installations and represent the company at on-site installation meetings to resolve field issues promptly.
• Conduct technical seminars for customers and channel partners, and represent the company at trade shows and special events.
• Offer feedback to Product Management regarding market conditions, product enhancements, and necessary upgrades.
• Prepare and submit weekly reports highlighting site-specific issues, customer concerns, or product performance challenges.
• Assist customers during the initial design phase and ensure proper application of Grid Solutions products.
• Deliver specialized training and operational documentation to customers to support their needs.
• Provide on-call support for customer installations and maintenance, including after-hours and weekend support as required.
• Undertake overseas travel within the Asia region for installations and maintenance projects.
• Perform other related duties as assigned.

The Successful Applicant

Requirements

• Bachelor's Degree in Electrical Engineering or a related field, or a Diploma in Electrical Engineering with relevant experience.
• At least 3 years of technical, sales, or related experience in Grid systems or the electrical industry.
• In-depth understanding of critical asset monitoring systems, including Battery Systems, UPS, and Battery Monitoring Systems, with experience in data center battery management and maintenance preferred.
• Excellent interpersonal, presentation, and communication skills to build strong relationships with customers, consultants, and end-users.
• Ability to work independently with exceptional organizational and problem-solving skills.
• Self-motivated, energetic personality with a customer-oriented approach.
• Proven ability to interpret technical instructions in mathematical or diagram form and resolve issues involving multiple variables.
• Demonstrated ability to plan and prioritize tasks effectively, including occasional support for team planning.
• Previous sales or service experience is an advantage.
• Maintains confidentiality and exercises discretion with sensitive business information.

What's on Offer

The client offers candidates an exciting opportunity to be part of a globally recognized leader in critical power grid technologies. Joining the team means working with cutting-edge solutions that drive innovation in power reliability and asset management for diverse industries like data centers, utilities, and telecommunications. Employees benefit from a dynamic, collaborative work environment with opportunities for professional growth, regional exposure across the Asia Pacific and Middle East, and hands-on experience with advanced technologies. The company provides comprehensive training, a competitive compensation package, and opportunities to represent the brand at high-profile events, trade shows, and seminars. For individuals passionate about technical excellence and customer satisfaction, the client offers a rewarding career path with significant impact on the future of energy and power systems.

Contact

Timothy Huang (Lic No: R1980928/ EA no: 18S9099)

Quote job ref

JN-012025-6632825

Phone number

+65 6416 9863

Michael Page International Pte Ltd | Registration No. 199804751N