Job Description:

• Demonstrate with minimal direction the attributes of good planning, driving for results, customer focus (both internal and external), good creativity, and problem solving abilities, in addition to good written and oral communication skills
• Develop modular approach to hardware design and architecture
• Generate concepts and develop detailed designs for the mechanical systems
• Conduct detailed engineering analyses on components and sub-assemblies
• Proactively assess the technical risks and resolve the design issues by providing reliable solutions
• Ensure quality is built into designs and driven through product development
• Develop a mechanical timeline for their own developments and is accountable for it.
• Support project planning and execute design implementation.
• Deliver module designs based on planned cost, schedule and quality
• Develop test methodology, experimentation, prototype to verify design.
• Work in close support of the marketing department in the analysis of customer need (VOC) and in the development of product specifications.
• Translate product requirements into a functional system
• Work with manufacturing team to support injection molding, gear design, machining, sheet metal and assembly
• Participate in other aspects of the product development such as : solving manufacturing issues, product performance, repair issues, product improvements, and value engineering
• Work cross-functionally with internal team and other core disciplines (EE, Firmware, Software, Marketing)
• Ability to apply advanced mechanical engineering principles and theories to complex issues.
• Mentor and coach junior engineers on project basis

Requirements

• A Bachelor in Mechanical Engineering with minimum 8 years of relevant professional experience in mechanical design.
• Candidate must have full experience in product development from conceptualization to mass production.
• Knowledge of mechanical engineering design principles and practice
• Experience designing complex mechanisms, such as clutches, gear trains, cams, and linkages
• Knowledge of electro-mechanical components such as motors, power transmission and sensors
• Expertise in the design of plastic, sheet metal, gear design, die-cast parts, rubber, electro-mechanical & mechanism parts/assemblies
• Fluent in SolidWorks CAD software or/and FEA
• Sound knowledge of Geometric Dimensioning & Tolerancing
• Knowledge of Design of Experiments and Six Sigma is preferred
• Competence with analytical techniques such as Design for Failure Modes and Effects Analysis, Design for Assembly, Design for Manufacturing, and Pugh Matrix is preferred

- Responsible of designing the Electrical system required to operate facility projects.

- Ensure smooth and proper execution of projects/contracts

- Supervision of construction works and co-ordinate with client’s representation, consultants and sub-contractors on technical issues

- Ensure quality of work is achieved and compliance of safety regulations

- Report schedule to Project Manager

- Attend site meeting with contractor on co-ordination and resolution of site problems.

- Must have good knowledge of generator electrical installation

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

• Tertiary qualification in Electrical and Electronics Engineering

• Minimum 6 years’ experience working on various communication systems technologies such as fibre-optic transmissions, digital trunked radio, public address and telephony, CCTV surveillance, access management and travel information systems.

• Experience in implementing railway-related projects

• Team player with good interpersonal and communication skills.

• Experience in writing technical proposals and presentations.

• Able to work independently with minimum guidance.

Our Client is a leader in the Energy Manufacturing industry in Singapore. Due to their current expansion plan, they are looking for an Electrical Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsible;

• Resolve plant faults by performing troubleshooting and conducting root cause analysis.
• Implement approved plant improvement projects and generate technical specifications for equipment parts and work services. Initiate requisitions when necessary.
• Conduct scheduled plant inspections based on the maintenance regime and carry out plant maintenance activities.
• Supervise maintenance contract works and develop work procedures for all maintenance tasks.
• Prepare comprehensive reports on a weekly and monthly basis, covering activities, overhauls, technical matters, and trips.
• Any ad-hoc duty as assigned

Job Requirements:

• Min degree in Electrical Engineering
• Exhibit good knowledge in Electrical systems.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Job Description: Senior Network Engineer

We are seeking a consultant with extensive experience Expertise in exchange connectivity and trading network infrastructure design, implementation and support (CCIE is a strong ‘plus’)

Key Responsibilities:

• Maintain and upgrade network and connectivity to other offices, regional exchanges, collocation sites and clients.
• Provide network design, solution deployment, and technical documentation for network and security
• related equipment such as LAN, WAN, Data Center networks.
• Translates business requirements into technical designs that ensure availability, stability, scalability,
• security and ensure the solutions comply to standard.
• Work on Transformational projects for APAC region.
• Optimize tooling for network infrastructure team, strong focus on automation.
• Understands the Regional business requirements, translates them and elaborates in coordination
• with the central engineering teams suitable technical solutions in line with the Global team’s
• Infrastructure standards.
• Gathers all business requirements, defines, documents and communicates solutions to the
• appropriate parties and implements or oversees implementation of those solutions with the central
• team.

Required Skills & Qulaification:

• Bachelor’s degree in information technology or equivalent
• 5 to 7 years’ experience of network architecture design, implementation, and support
• 5 to 7 years’ experience in deploying network and security equipment, such as Cisco routers, switches, wireless infrastructure, and DWDM Layer 1 experience.
• In-depth knowledge of TCP/IP, BGP, OSPF, EIGRP, IP multicast, QoS, VPC, VRF, spanning tree, Data
• Centre setup and Cisco ISE with strong deployment and troubleshooting experience
• 5 to 7 years’ experience with network monitoring and troubleshooting/analysis tools, such as Zabbix, MFNA, SolarWinds, Wireshark, CPacket, Sev One .
• Familiarity with Market access across Asia Pacific, and ability to utilize network knowledge and experience to improve network infrastructure performance.
• Working knowledge of ITIL framework
• 5 to 7 years’ experience handling complex IT-related projects: from writing a proposal, initiating, & planning projects, to executing, monitoring/controlling projects, until and including project closure.

Interested candidates may apply through the application system or send it to [email protected]. Shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to Morgan Mckinley Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.morganmckinley.com/sg/privacy-policy. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Morgan McKinley Pte Ltd
Dinu Dinesh

EA License No: 11C5502

EAP Registration No: R22110286

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· At least 2 years working experience in air-conditioning & mechanical ventilation system

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Minimum diploma or Mechanical Engineering

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits

We regret that only shortlisted candidates will be notified.

Our Client:

Our client is an established Manufacturing company, headquartered in Japan. They are currently looking for an energetic Sales Executive/ Sales Engineer to join their growing team in Singapore.

The Responsibilities:

• Maintain organized sales records and report month-end goal-setting to the senior management team
• Support management by completing orders and keeping customers informed of delays and delivery dates
• Coordinating the sales team by managing schedules, filing important documents, and communicating relevant information
• Ensuring the adequacy of sales-related equipment or material
• Responding to complaints from customers and giving after-sales support when requested
• Handle the processing of all orders with accuracy and timeliness
• Establish the planning process for the company by converting the Sales forecast into a feasible manufacturing plan
• Oversee preparation and timely release of raw materials to production to meet production orders. Track usage of raw materials to production
• Prepare monthly reports on the performance of production and highlight issues and bottlenecks that may potentially impact the achievement of the production schedule and customer satisfaction
• Performs time studies to determine how long certain tasks take
• Preparation of various monthly reports for Management (Sale & Purchase Invoice Summary, Sales & Sales Profit Report, Sale by Segment Sale Report, Unit Price Calculation, Bi-yearly Sales Budget Report, etc.)
• Ad hoc duties as assigned by management

The Requirements:

• 2 - 5 years of sales/sales engineer experience in a manufacturing field
• Ability to adapt in the fast-paced working environment
• A team leader & player
• Able to travel, usually to Malaysia, Thailand, Japan, and Shanghai
• Able to converse in Mandarin to communicate with the native Chinese speakers from China office
• Able to converse in Japanese will be an added advantage as you will need to liaise with native Japanese speakers from Japan HQ as well

RGF Privacy Policy – https://www.singapore.rgf-professional.com/privacy-policy

Disclaimer: The Company complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. All qualified applicants will be considered for the position regardless of their age, race, religion, nationality, marital status, or family responsibilities. A more detailed discussion of the TGFEP is available on the Tripartite Alliance for Fair and Progressive Employment Practices (TAFEP) website at https://www.tal.sg/tafep.

JO Reference: 114170

Job Descriptions

1. Plan, execute and supervise all Facilities maintenance related work services.
2. Manage Building / Facilities / M&E works and services for effective and efficient operations facilities performance.
3. Coordinate and supervise the M&E installation and maintenance work if needed.
4. Working closely with the client, sub-contractors, and the facilities team to resolve any technical issues. Attend M&E related meetings and involve in the preparation of related reports.
5. Assist in planning, controlling and coordinating of mechanical, electrical works.
6. Schedule, monitor and supervise the progress of works .
7. Prepare and follow- up closely on the client inquiries and quotations.
8. Follow the company internal work processes and documentation.
9. Build and maintain good client relationships and uphold high quality standards.

Job Requirements

1. Minimum Diploma or Degree in Engineering or Building / Real Estate/ Facilities Management or any related qualifications.
2. Facilities Maintenance operations background with at least 3 years of experience will be an added advantage.

5.5 days work week.

Who we are

Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.

Job Description

As a Workshop Engineer, the main role will be conducted within an office-based position at Fugro in Singapore office. He will serve as the primary support contact for the mechanical aspects of all mobile / fixed drilling equipment. He will play a pivotal role in the planning and budgeting for preventive maintenance and upgrades which will include liaising between many internal and external departments. Additionally, he will be responsible for supervising routine mechanical tasks carried out by rig mechanics on the ships.

Day-to-day tasks will include:

• Assist with the preparation and planning for the mechanical equipment inspection and testing that will be carried out throughout the year in the workshop facility.
• Assist the equipment resource manager with the planning and implementation of the upgrades relating to equipment including modification works.
• Participate and execute mobilization activities of mechanical equipment, including development of procedures, task plans, as instructed.
• Plan and arrange contractors for repairs & maintenance and assigned activities on the vessel / workshop and to maintain machines, equipment, and tools, as assigned by equipment resource manager.
• Effectively remotely supervise the rig mechanics onboard vessels ensuring that all repair and maintenance including preventive maintenance for offshore drill rigs and geotechnical equipment on the vessels is carried out timely and effectively.
• Carry out periodical inspections of the geotechnical equipment onboard the ships and in Warehouse to ensure running and safety of the plant.
• Identify in advance need of additional support of contractors for critical Mobilisation / Repair activities concerning mechanical equipment such as Winches, Power packs, etc.
• Ensure maintenance records, certification and spare part information of the geotechnical equipment is filed in the planned maintenance system and available for future referral.
• Develop a comprehensive spares package for the Geotech equipment and effectively stock control it during ongoing operations; equipment to be topped and re-ordered when required.
• Ensure that all work performed complies with the requirements of the Project and is carried out in accordance with the rules and the methods of the Company.
• Ensure that all aspects of project Safety, Health & Quality remain prioritised at the work sites.
• Stand in as the emergency point of contact to support the field staff in troubleshooting issues on mechanical and hydraulic equipment.
• Ensure spares & consumables for the geotechnical equipment required on top of vessel standard consumables are defined and updated in STAR PMS onboard Fugro managed / chartered vessels for mechanical equipment.
• Supporting activities and tasks delegated by equipment resource manager in equipment maintenance & reliability audit requirements.

About You
The Workshop Engineer will be a qualified and experienced Mechanical Engineer with a detailed operational and maintenance knowledge of static & rotating mechanical (including high pressure hydraulic & Pneumatic) systems. He would have a minimum 8 years of hands-on experience on servicing hydraulic and mechanical equipment used in Marine & Offshore industry, of which minimum 3 years of experience is working on hydraulic equipment used on offshore facilities such as MODU’s, Rigs. The role is responsible for the day-to-day supervision of the Offshore Geotechnical drilling and Geophysical mechanical equipment’s maintenance. The role supports operational sites (vessels with hydraulic and mechanical equipment) with advice and direction whilst maximising the availability of plant and equipment through maintenance-based planning and organisation.

What we offer

• Competitive salary with Annual Wage Supplement
• Generous paid-leave
• Career & training opportunities (international opportunities possible)
• Company shuttle from various pick-up at MRT stations across Singapore
• Collective health insurance and outpatient benefits;
• Employee Assistance Programme (EAP) to provide help when you need extra support.
• Additional benefits: Long Service Awards, Professional Membership, Weekly fitness-related activities, etc)

**Benefits may vary according to position/contract/grade level.

Our view on diversity, equity and inclusion

At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together create a safe and liveable world’ – and to each other.

How to apply

• Please include your latest resume in the application.
• Please describe your working rights in Singapore (work pass sponsorship is subject to quota and availability).
• We regret to inform that we will only process applications made via our Careers website (and other linked portals) and only shortlisted applicants will be contacted.

We are looking for “Senior Firmware Engineer” for developing our next generation communication modules and Input/output modules for industrial automation applications. You will be involved in the entire product development life cycle activities from defining the functional specification, design and implementation till release. You will be required to consistently meet project deliverables with high quality and work in a diverse team environment across the globe.

Requirements

• · Bachelor or Master’s degree in Computer Science/Electronics Engineering with minimum 8-10 years of experience in embedded software development
• · Demonstrated experience in development of PLCs and/or Bus Couplers and/or IO modules for industrial automation applications
• · Should have delivered at least 3 products from inception to release with quality
• · Hands-on experience in developing prototype and design validation techniques
• · Demonstrated programming experience with C and/or C++
• · Experience in developing applications on VxWorks
• · Hands-on experience with communication protocols (Modbus, EtherNet/IP, CAN, Serial)
• · Experienced in solving complex system problems with systematic troubleshooting skills
• · Preferred if the candidate has worked on PLC with CoDeSys environment
• · Hands-on with GIT, IAR workbench, Drivers for HW peripherals and secure coding
• · Highly motivated and able to start contributing towards deliverables within a short notice

Who We Are Looking For

We are looking for a Senior Quality Engineer who always strives to find innovative ways to improve product quality. Be part of a cross-functional Agile team of UX/UI designers, mobile and web developers, the product owner and business analysts, for a large-scale national strategic project in the education vertical. The team values quality, automation and user experience of the software we deliver.

Responsibilities:

• Champion and drive product quality and QE practices in an agile development environment
• Collaborate with multiple internal and external stakeholders to ensure that the product is built right
• Validate product features as per acceptance criteria
• Design, develop and maintain the testing environment, testing framework, test plan, regression test suites and test cases in accordance with changing requirements
• Uncover and fi x blind spots and edge cases in test cases
• Perform various tests such as Manual/Automated/Functional/Exploratory testing/Cross-Platform/Performance Testing for the various platforms (iOS, Android, Web)
• Conduct system integration tests with external systems and generate test reports
• Collaborate with development team to establish Continuous Integration and Delivery Pipeline

Requirements:

• Minimum 5 years of experience in quality engineering or relevant roles
• Strong foundation in test methodologies, good analytical skills, attention to detail and problem-solving abilities
• Experience in automated testing tools/frameworks (e.g. Cucumber, Selenium, Appium, Robot Framework)
• Knowledge in Behavior-Driven Development
• Experience in Non-Functional Testing such as security testing, as well as performance and load testing
• Good team player with good communication skills
• Good understanding of mobile (iOS and Android - React Native) and web technologies (e.g. React.js, Node.js) with the respective debugging tools
• Strong understanding of Unit Testing using JavaScript Framework (e.g. Jest, Mocha, Jasmine)
• Initiative to go the extra mile such as by exploring and creating tools to improve testing processes
• Additional certification in Software Quality Assurance is a plus

We are looking for a Hardware Senior Engineer to make a difference!

What will you do?

Drive further development of PLC / programmable controller offer within the scope of product maintenance (analogue and digital circuit technology as well as power electronic circuit components)

• · Preparation and provision of data as a basis for the decision of the Board of change committee (BoC) regarding technical feasibility, risks and an effort estimation
• · Fault analysis on electrical assemblies
• · Selection of suitable replacement parts for obsolete or no available electronic components
• · Circuit diagram creation/modification with ECAD tools
• · Definition of procedures and test descriptions or definition of acceptance criteria for verification tests
• · Specify, plan, carry out and document test and verification at component, function and device level
• · Internal communication/ coordination with mechanical design, PCB layout, quality department, purchasing and industrialization
• · Creation or updating of development documentation
• · Participation in national and international project and team meetings

What qualifications will make you successful?

• · Bachelor degree in Electrical, Electronic Engineering.
• · 5 years of experience in Hardware Design.
• · Deep knowledge in digital Electronic Design including highspeed constraints
• · Knowledge and experience in Cadence, Allegro
• · Analytical approach to identifying the causes of errors
• · Customer oriented and business focused

More Jobs at: www.blueboxjobs.com

Roles and Responsibilities:

• Programming, troubleshooting of PLC/SCADA system.
• Experienced in programming using ladder, VBA or other programming languages will be added advantage.
• Basic setup and troubleshot of Network switches and able to perform network check and IP address configuration of network devices.
• Carry out routine and preventive maintenance of control systems and network systems.
• Closely collaborate with Project Manager and Engineers to support the project.
• Provide information and prepare reports by collecting, analysing and summarizing of the control system.

Requirements:

• Diploma or Degree in Computer Science, Electrical & Electronics or Mechatronic Engineering or other similar disciplines.
• Relevant experience in PLC/SCADA application, networking setup, instruments and troubleshooting in hardware.
• Good interpersonal skills & positive working attitude, team player.
• Able to work under minimum supervision.
• Able to understand electrical drawing.
• Familiar with Microsoft office.
• Able to work night shift during maintenance period

We are assisting our client, part of a global engineering and technology group, look for a Digital Baseband Design Engineer to complement their existing team. You will be a key product developer for the Counter-UAS (Uncrewed Aerial System) products for the local and overseas markets. Working closely with the Solution Architect, Project Manager and Technical Lead, you will be part of a product development team to design and develop our RF sensing and jamming products as part of the Counter-UAS product lines.

Responsibilities:

• Plan, execute, monitor, and control the various digital baseband and firmware designs of the products
• Specialized in digital baseband design for SDR applications
• Proficient with tools such as MATLAB, GNU Radio, Circuit Lab, Altium or other PCB layout design software

Requirements:

• Minimum Diploma in EE/IT or equivalent
• Experience in Windows server OS, Unix/Linux OS & VM environment
• Experience in product development
• Good knowledge with digital baseband and electronics circuit designs
• Strong interpersonal and communication finesse
• Proactive problem-solving prowess
• Ability to adapt to evolving technologies and industry best practices

We are looking for highly motivated experienced Machine Learning Engineer. We have designed a specific learning program to accelerate the young and talented graduates to enter and start their careers with the aspiration to empowering breakthrough innovation in Financial Services!

WHO IS KLAARA
KLAARA provides AI-driven solutions tailored to the needs of customers in the capital market, insurance, reinsurance, and various other organizations. Our cutting-edge platform empowers businesses to transform their unstructured data into actionable intelligence, fuelling better decision-making and driving competitive advantage.
Headquartered in Singapore, KLAARA was launched in 2023 as a result of 3 years of Research and Development and a spin-off of Upskills, a consultancy company in Capital markets.
KLAARA is composed of creative thinkers and problem solvers, with the ultimate mission to breakthrough innovation! All of us are fully engaged in delivering cutting-edge solutions with the latest state of the art in AI.
Our DNA is reflected in our values, these are how we act every day to make the greatest impact on what we are doing!

• We ask “Why not”.
• We constantly learn and grow.
• We care for one another.
• We cherish honest and respectful conversations.
• Positive energy and proactivity are the foundations of our team.
• Excellence and pushing technologies characterise our ambition: Sky is the limit!
• We are serious about fun.
  If you see yourself enjoying working as a member of KLAARA team, then check out below!

WHY JOIN US?

• To work with a team of dynamic ML engineers and R&D team in a fast-growing start-up
• Contribute to KLAARA’s product development roadmap
• Identify and train suitable machine learning models to be used in conjunction with trading algorithms for complex problems
• Oversee the full ML model training lifecycle from data preprocessing to model serving
• Design and implement ML pipelines to allow for proper tracking of data trained models
• Deliver POC.
• Progress within the state-of-the-art AI environment
• Fine-tune the current model and implement it.
• Understand, analyse and define new models to create new use cases.
• ​Lead a team of engineers.

Requirements

• Master or Bachelor's Degree in Computer science, AI, Data Science is preferred.
• Experience in ML model training/fine-tuning from Data preprocessing all the way to model serving
• Experience in optimizing performance of ML models
• Experience with ML pipe lining toolsFull proficiency in Python, R
• Understanding of basic Git commands
• Proficiency in Linux-based operating systems
• Strong knowledge in Machine Learning and Deep Learning (CNN, RNN, Random Forest, SVM, etc)
• Experience with Document AI understanding, and extraction is a big plus
• Experience with Pytorch or Tensorflow
• Knowledge of DevOps CI/CD tools such as Jenkins
• Knowledge of container tools such as Docker and Kubernetes
• Github repository with projects is a big plus (we want to see what you have been able to create)
• Ability to solve technical challenges and solutions
• Good command of spoken & written English
• A fast learner and able to work independently

Job Role/Level Infrastructure Engineer, Systems

Mandatory Skills Azure, Professional, Cyber Security Governance, Risk & Co

Preferred Skills -

Brief Job Description

Profiles should possess 2 years in cloud security.

Skillset : Azure, Professional, Cyber Security Governance, Risk & Co

• Familiar working with Microsoft Azure

• Day to day security monitoring on the Azure security alerts, DSM alerts and any other custom alerts related to security.

• Day to day operation of administration and support on Microsoft Cloud Defender, Logs Analytics Workspace, Network Security Groups and Azure Trend Micro Cloud One

• Incident management and resolution, raising tickets to Microsoft and Trend Micro to support and rectify any problems.

• Software upgrade of TrendMicro Cloud One to remediate any vulnerabilities and to get the most out of security administration enhancement

• Support on the vulnerability management in GCC to recommend the mitigation actions to the system OIC and GCC infra

• Conduct queries on the log analytic to support cyber proactive investigation as per Cyber needs.

• Some Knowledge of scripting , az cli, PowerShell , KQL and Logic Apps is advantageous

Responsibilities:

• Lead in project coordination, supervision of site installation, testing and commissioning in Electrical Services
• Schedule and monitor program activity to achieve on-time result and follow-up with suppliers / vendors.
• Preparation of design construction drawings
• Liaise with all parties involved in the project including Local Authorities, Consultants, Architects, Main contractor, Sub-contractors & Suppliers.
• Attend site meetings and inspections.

Requirements:

• Degree / Diploma in Electrical Engineering or equivalent
• 3-5 years working experiences in similar position with relevant design and installation knowledge or understand the full spectrum of tender costing with experience in evaluation and cost estimation for Electrical Services will be added advantage
• Ability to work independently in a challenging and demanding environment

Job Description & Requirements:

• Proven experience in DevSecOps role.

• Extensive experience with security scans, vulnerability remediation, and patch implementation.

• Strong expertise in Kubernetes and container orchestration.

• Proficiency in managing containerized applications using Docker.

• Hands-on experience with GitHub and CI/CD pipeline implementations.

• Deep understanding of Azure cloud services and infrastructure management.

• Strong scripting skills in languages such as Bash, Python, or PowerShell.

• Excellent problem-solving skills and attention to detail.

• Strong communication and collaboration skills.

Driven by our passion for spreading joy and unleashing limitless creativity in the world of gaming, our goal is to establish a game studio right here in Singapore. Our dedicated focus lies in crafting casual mobile games that deeply immerse players in incredibly enjoyable experiences!

We eagerly welcome humble yet ambitious individuals to join us on this thrilling journey!

Responsibilities

• Design, develop, test, and maintain scalable front-end and back-end web applications.
• Manage the technical design, implementation, debugging and optimization of in-house web portals.
• Collaborate in cross-functional teams for development of key game features and services.
• Identify potential technical risks early and provide technical advice for mitigation.
• Ensure the security and integrity of applications and user data.
• Write clean, maintainable, performant and well-documented application code and test code.
• Collaborate with other senior engineers to establish coding standards, best practices and development processes.
• Create and maintain technical documentation for code, systems, tools, processes.
• Troubleshoot and resolve front-end and back-end issues in a timely manner to minimize disruptions in the game experience.

Requirements

• Bachelor's or Master's degree in Computer Science, Computer Engineering, or a related field.
• 4 years of experience in web development.
• Experience with front-end development (e.g. Vue, React, Typescript, CSS, HTML).
• Strong back-end software development experience with Node.js, Python.
• Solid understanding of API design and Kafka.
• Experience with data-driven product development: analytics, A/B testing, etc.
• Demonstrable experience with multiple database systems (MySQL, Cassandra, etc.).
• Familiarity with DevOps practices, CI/CD pipelines, and infrastructure as code.
• Excellent problem-solving and debugging skills.
• Strong communication and interpersonal skills with experience working in cross-functional teams.
• Passion for gaming and a drive to create engaging experiences for players.
• Experience with designing, developing scalable, production-ready architecture.

Preferred Qualifications

• Solid understanding of game architecture, design patterns, and software engineering principles for delivering high-quality gaming experiences.
• Experience with cloud computing platforms like AWS, GCP or Azure.
• Prior experience in game development.
• Leadership experience and the ability to mentor junior engineers.

Job Description:

- Conduct product development activities, such as product system & sub-system design and integration, technical evaluation, prototype preparation / testing, test analysis and system qualification.

- Review specifications and technical requirements with clients.

- Generate product technical documents, drawings, assembly drawings and bill-of-materials.

- Provide technical support to manufacturing, quality and marketing department.

- Work effectively in a multiple department project team to ensure that project schedule, budget and quality are met.

Job Requirements:

- Degree in Mechanical Engineering.

- Knowledge in 3D modeling software such as Solidworks is an advantage.

- Able to work hands-on and manage project deliverables individually.

- An effective team play.

- Excellent problem solving skills.

Responsibilities:

• Provide 2nd level and up support for NOC and product team
• Provide Level 2 or 3 product and solution support
• Deployment of servers, workstations and network equipment (e.g. Microsoft Windows, Linux/UNIX Systems, Virtualization, Security and Application Management Solutions) network, endpoint and server solutions (eg, Network, Systems and Security Monitoring Systems, NGFW, IPS, IDS, SIEM, Routers, Network/Security Analysis Tools etc)
• Be Subject Matter Expert in assigned product categories
• Project manage deployment of IT solutions
• Presales Support for IT solutions
• Documentation

Requirements:Minimum a Diploma holder in IT

• Minimum a Diploma holder in IT
• Possesses at least 3 years related NOC, network/server/endpoint support experience
• Experience in IT infrastructure management tools
• An up-to-date knowledge and understanding of business and industry needs as well as the technical demands
• Recognition of the importance of customer focus and/or of serving the needs of the end user
• Excellent communication skills, particularly the ability to communicate with staff who are not technically trained
• The skill to take on a variety of tasks and pay attention to detail
• Analytical and problem-solving ability
• Team-working skills and the ability to feel comfortable working with different work teams, clients and groups of staff across an organization
• Organizational skills and the ability to prioritize your workload
• Microsoft, Cisco, ITIL, CISA, CISSP, CREST, CEH product, networking, virtualization, security solutions knowledge and professional certifications will be a plus

Training will be provided if deemed necessary

Company Overview:

Argentra was founded in 2001 with a core focus on Information Security. A key achievement was winning a contract to develop and implement a custom data security application for the Defence industry. Our commercial clients benefit from our experience in high security environments. Argentra’s technical experts also provide technical consultation and support to other system integrators who require our specialised technical skills.

At Argentra, we put our customer’s interest first by understanding your problems, suggesting the solutions that you need. We won’t sell you what you don’t need. As a specialist engineering company, we have years of experience in developing custom security software, security risk consulting. Large System Integrators, Software Principals and Distributors engage Argentra to support their projects because our of specialist skills. For certain skills in Information Security, we may be the only expert provider of the skill set in Singapore.

Argentra is certified and has expert skills in different brands of IT Security Solutions which enable us to give good advice and recommendations to our clients. Our practical real-world experience enables us to deliver difficult security projects on time and on budget. We have the practical real-world experience to provide our clients with expert advice

Interested and qualified applicants for the above position, please submit comprehensive resumes stating current & expected salary to:

Argentra Solutions Pte Ltd

Email: [email protected]

* Only short-listed candidates will be notified for interviews
* No phone calls regarding the positions will be entertained, please send in your applications via email/post

The Production Engineer, as Process Owners (Production Process) are responsible for the development, description, implementation, training, and monitoring of processes assigned to them.

Your Responsibilities

• Analyzing processes assigned, define the processes’ interfaces and boundaries, and determine the requirements for a specification-compliant process result through perform and document process validations or re-validations including IQ, OQ and PQ.
• Develop the process steps together with the interested parties:
• Define content of routings/workflows.
• Create the content for their description (FPV).

During product transfer:

• Taking charge of own assigned processes, plan and co-ordinate with relevant parties for Process transfer and is accountable on timeline and objectives
• Derive acceptance criteria for process target quantities.
• Prepare production transfer (ERS).
• Prove achievement of the process target quantity.
• Release process for serial production.

At serial production, drive defined plans:

• Monitor key performance indicators, analyze them periodically, monitored deviations in the process and initiate corrective actions;
• Conduct continuous improvements for operating performance through yield improvement, cycle-time optimization, waste reduction and productivity improvements;
• Monitor climate conditions/process media and work with relevant parties to take corrective actions for deviation or abnormality.

Statistical skills:

• Conclusion of Hypothesis testing with statistical means.
• Identify Special and Common cause variables and take appropriate actions to address them.
• Define and determine the process capability of respective processes.

Lean Manufacturing:

• Implement concepts of Poka Yoke, SMED into assembly tooling and fixtures.
• Utilize 5S, 7-Mudas, Kaizen, Process flow, Spaghetti diagrams for production flow optimizations.

Continuous Improvement Project Management:

• Able to Lead, co-ordinate and use in FMEA / PRA in Continuous Improvement Projects (CIPs).
• Utilize Ishikawa, PDCA, A3 Problem Solving, in day to day production activities / improvements.

Laser Technology (Good to have):

• Metallography: Perform and analysis of laser welded parts for microstructures, intermetallic, mechanical properties, eg, with high magnification microscopes or C-SEM (cross-sectional scanning electron microscopy).
• Demonstrate the understanding of light's technical applications over the whole spectrum and the relation to Laser technology.
• Understanding of types of laser and their operating principles, and the use of such Laser in Leads production (eg. Laser welding and Laser marking, etching, and engraving).

Your Profile

• Bachelor’s Degree or Diploma in Biomedical, Material, Chemical, Electronics, Mechanical or Industrial Engineering;
• Degree holders: at least 2 years of relevant working experience in process / production engineering.
• Diploma holder or equivalent: At least 8 years of relevant working experience in process / production engineering.
• Prior Engineering experience in medical devices industry is preferable.
• Familiar with ISO13485 and GMP.
• Basic knowledge in SAP and MES is preferable.
• Strong organizational, communication and intercultural skills.

What we offer

• being encouraged to think and act entrepreneurially
• working in global teams and projects
• developing yourself professionally

Site Engineer/Supervisor (Construction / Commercial and Residential Building)

Responsibilities:

•Assist Project Manager in all on-site technical/ engineering matters and authority submissions.

•Supervise and monitor projects are carried out in accordance to company’s operating procedures, quality standards & contractual specifications.

•Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.

•Lead in Site Coordination and execution relating to the construction project.

•Planning of micro scheduling with other trades/disciplines against Master program.

•To update structural/architectural/M&E progress with scheduling tools.

•Ensuring supervisors & foremen meets clients’ regulatory work requirements.

•To check and ensure compliance with TOP check list

•Responsible for all inspection activities being carried out.

•Ensuring environmental, safety and health practices are carried out at all times.

Requirements:

•Degree/Diploma in Civil or Structural Engineering

•4-5 years experience in Building Engineering projects

•Proficient in MS Office, AutoCad

•Organised, meticulous with positive work attitude

•Able to work independently and a team player

•Good analytical, supervision and communication skills

•Completed QM project and a registered Core-trade Foremen/ Supervisor would be an added advantage

. Must be able to work night shift or split shift
. Must be able to work extra hours or weekend if needed

Join Alphline Technologies, a bespoke IT solutions company where we combine passionate creativity with technical expertise to deliver cutting-edge web, mobile, and infrastructure solutions. Our team thrives on collaboration, innovation, and building impactful products that help businesses soar.

Do you thrive on crafting innovative solutions that propel businesses forward?

At Alphline Technologies, we're a team of passionate technologists who combine creativity with expertise to deliver cutting-edge solutions. We leverage the power of web, mobile, and infrastructure technologies to empower businesses to achieve explosive results!

As an Automation Engineer, you will play a key role in developing and maintaining cutting-edge industrial automation solutions. You will be responsible for solving complex challenges, designing innovative systems, and implementing scalable solutions that enhance operational efficiency and reliability.

Tech whiz + problem solver? Be our Automation hero! Fix issues & empower users. Apply now!

Responsibilities:

• PLC Programming and Design: Develop, program, and configure PLC systems for automation projects, ensuring optimal performance and functionality across various industrial applications.
• Project Management: Manage and execute end-to-end PLC automation projects, from design and programming to testing and implementation, ensuring timelines and quality standards are met.
• On-Site Support and Troubleshooting: Provide on-site support for the installation, commissioning, and troubleshooting of PLC systems, diagnosing and resolving issues efficiently.
• Documentation: Create and maintain comprehensive documentation, including change requests, validation protocols, technical specifications, and system configurations.
• System Diagrams and Architecture: Design, update, and maintain detailed architecture, network, and control system diagrams for automation projects, ensuring clear documentation of system layouts and workflows.

Requirements:

• Degree/Diploma in Electrical Engineering or other automation-related engineering disciplines.
• At least 5 years of relevant skill experience in automation engineering.
• Good project documentation skills in English.
• MUST HAVES – To articulate and demonstrate proficiency through a portfolio of projects and involvement.

1. Solid understanding of control systems (e.g., PLC, SCADA, DCS, or HMI) and networking protocols (e.g., MODBUS, Ethernet).
2. Hands-on experience with PLC Programming and system integration, particularly with Allen Bradley and Siemens platforms.
3. Familiarity with SCADA systems (e.g., iFix).
4. Experience in the commissioning of industrial automation systems.

• Added advantage if the candidate possesses knowledge and proficiency in:

1. Familiarity with the GMP environment.
2. Knowledge of Windows and Linux operating systems.
3. VBA and MSSQL programming languages.

• Capable of troubleshooting and resolving technical problems with minimum supervision.
• Able to work independently and as a team player.
• Excellent interpersonal, presentation, and communication skills in English.