[What the role is]

You will be part of a dynamic team responsible for planning, managing and coordinating research and development (R&D) projects as well as technology innovation and exploitation activities and programmes to enhance NEA’s operational effectiveness and build new capabilities to meet Singapore’s environmental challenges. You will also collaborate with both internal and external stakeholders to operationalise and commercialise research outcomes from NEA’s various R&D investments. This role will provide opportunities for you to engage, establish strong linkages and form effective partnerships with the academia, industry, and other government ministries and agencies.

[What you will be working on]

Your responsibilities include, but are not limited to the following:

• Develop and manage R&D projects and technology innovation projects in partnership with end user departments, institutes of higher learning, research institutions, industry partners and other stakeholders.
• Develop programmes and follow through with projects to support the operationalisation and commercialisation of NEA's R&D outcomes
• Coordinate, develop and review the relevant programmes and initiatives under Singapore’s Research, Innovation & Enterprise (RIE) framework with other government ministries and agencies
• Profile NEA’s R&D outcomes through suitable platforms

[What we are looking for]

• Degree in Electrical and Electronics, Mechanical, Environmental Engineering or related discipline with preferably relevant work experience in environmental and technology management related areas, especially in the area of robotics and automation
• Good sense of ownership and responsibility with a strong drive for achieving results
• Ability to plan, organise, and coordinate activities in a group setting
• Strong analytical, interpersonal, communication and consensus-building skills across different disciplines, cultures, and organisational levels

As part of the shortlisting process for this role, you may be required to complete a medical declaration and/or undergo further assessment.

To apply, please proceed to Careers@Gov at https://sggovterp.wd102.myworkdayjobs.com/PublicServiceCareers/job/NEA-HQ-ENVIRONMENT-BUILDING/Executive--Senior-Engineer--Environment-Technology-Management-Department-_JR-10000025408

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

• Plan, execute, monitor and control works program and activities for projects.
• Manage the project site by overseeing day to day running of all matters related to the construction of the project and leading the project site team in day operation.
• Monitoring of project budget
• Attend progress meeting and liaise with consultants, main contarctors, clients and relevant authorities.
• Attend regular site meeting
• Supervise and monitor the site labour force and the work of subcontractors
• Resolve any or other site related technical problems encountered
• Report to management on the project progress report
• Perform site coordination with site manager,operation and supervisor
• Review and approve Risk Assessment for project
• Co-ordinate safety meeting
• Identify work risk together with operation manager, site manager and site personnel
• Oversee quality control, safety and healthy matters on the site
• Planning, implementing and monitoring the work schedule with the required workforce according to the master and detailed work programmes.
• Assist in tendering , feasibility study etc.
• Participate in ISO and Biz Programmes of the company
• Any other duties assign by the management from time to time
• Extensive knowledge of diesel engines and construction equipment.
• Ability to work after-hours if required.
• Good communication skills.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Senior/Staff Software Engineer (Industrial Automation - C++, C#)

Salary: $6,000 - $12,000

Working Days: Monday – Friday

Working Housr: 8:30am - 6:15pm

Working Location: Woodlands

Job Responsibilities

• Design, develop, test, and debug robust and efficient industrial automation software using C++, C# & WPF.
• Utilize Windows API and libraries for interaction with hardware components.
• Program machine functionalities using motion control cards for precise movement control.
• Integrate with distributed I/O systems to gather sensor data and control actuators.
• Implement robust communication protocols for data exchange between software and hardware components.
• Leverage advanced threading techniques and synchronization mechanisms for optimal application performance.
• Employ advanced memory management practices, including memory mapped files, file mapping objects, and memory sections, to ensure efficient resource utilization.
• Utilize the C++ Standard Library and templates effectively for code optimization and reusability.
• Understand and utilize Windows objects like events and mutexes for thread synchronization and communication.
• (Optional) Develop user interfaces using frameworks like WPF or WinUI to provide a user friendly experience for monitoring and control (if applicable).
• Write well-documented, maintainable, and efficient code adhering to best practices.
• Collaborate with electrical engineers and mechanical engineers to understand system requirements and ensure software meets functional specifications.
• Participate in code reviews and provide constructive feedback to fellow developers.
• Stay up-to-date with the latest advancements in C++, industrial automation technologies, and relevant libraries.

Job Requirement:

• Bachelor’s degree in computer science, software engineering, or a related field
• Minimum 8 years of experience developing industrial automation software using C++, C# & WPF.
• Proven experience with programming motion control cards and distributed I/O systems.
• Strong understanding of Windows API development and memory management techniques.
• In-depth knowledge of the C++ Standard Library and its functionalities, including templates.
• Experience with Windows objects like events and mutexes.
• Familiarity with Windows GDI and GDI+ is a plus (for graphics-related tasks).
• Experience with Borland/Embarcadero C++ Builder VCL platforms is a strong plus.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

A Manufacturing Company for more than 20 years in the service located at Benoi, require the following Positions to join our Esteemed Organization.

ENGINEER

Requirements

1. Make drawing as per the trailer models and boss requirements using Auto CAD and DO Nesting Machine Language

2. Maintain the final confirmed drawings records for the future reference

3. Check the drawing dimensions according the trailer model

4. After checking send the drawing to the cutting department

5. Cut the H Beams and plates as per the drawing using the CNC cutting machine

6. Check the cutting parts dimensions after cutting and send to trailer fabrication department

7. Check the requirements for the fabrication workers for the trailer fabrication

8. Check the H beams and other materials stocks and inform to boss

9. Check the fabricated trailer quantities for boss request if needed

10. Take control of the weighing machine in the Guard house if security guard men not present

11. To include keep track of stock require for new project and stock balance to top up

12. Experience Required

13. Singaporean Only

Please send your detailed resume with your recent Photograph, last drawn salary, expected salary and availability to : [email protected]

Chemical Process Engineer (Operations)

Salary: $3800 to $4300 + site allowances

Working Days: Monday to Friday (8am to 5pm)

Working Location: Tuas (Company Transport / Transport Allowance ($120) if candidate possess own transport)

Responsible for developing and implementing process strategies, managing process resources, optimizing current processes, and maintaining process documents.

Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown
• To undertake any other assignment given by the Management from time to time.

Job Requirements:

• Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Electrical and Control Design Engineer

Salary: $3,200 - $5,800

Working Days: Monday – Friday

Working Hours: 8:30am - 6:15pm

Working Location: Woodlands

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard

Job Responsibilities:

• Able to plan/coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at the site and recommend solutions to relevant teams/departments.
• Review Architectural drawings for conflicts with Structural/M&E and liaise with consultants to resolve issues.
• Ensure all work is carried out within the schedule and maintain the required quality.
• Ensure a safe work environment at the work site and manage workers.
• Assist the Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submitting and monitoring technical drawings, method of statements, and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.

Job Requirements:

• Possess a Degree / Diploma in Civil Engineering / Structural / Architecture and related discipline.
• Experience in LTA-MRT project will be advantageous
• Proficient in Microsoft Office/Projects, Autodesk AutoCAD/Revit.
• Ability to keep a positive attitude in a fast-paced environment.
• Good attitude, good communication skills, and good team player.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Element has an opportunity for an Engineer whose primary responsibility is to support the Lab Manager in running day to day laboratory affairs along with site and field testing.

The location is at Jalan Boon Lay, Singapore.

Job Duties:

• Ensure work compliance to ISO 17025 requirements
• Perform metallurgical, hardness and chemical testing
• Testing includes:

1. Cut, polish and prepare metallography samples and perform metallography of ferrous and non-ferrous

2. Microstructural characteristics

3. Materials properties evaluation

4. Assist in failure analysis

5. Perform metallographic examinations on various materials to be determine grain size, cleanliness, volume percentage of phases and general microstructure evaluation

• Coordinate with the clients & third party witness as to the testing details
• Chemical analysis & PMI as required
• Manage technicians to carry out work as per the planning schedule
• Be willing to assist in other activities from time to time that may be requested by the department manager to assist in the execution Element Technology annual targets and budget

Job Requirements:

• Bachelor degree in Metallurgy or related discipline
• Minumum 2 years of experience working in a laboratory in the field of metallurgy testing (failure analysis a plus)
• Good technical report writing skills
• Good maths skills
• Knowledge and experience of safe operation of metallurgical testing equipment and operating in lab and / or industrial environment
• Excellent organisational and team leading skills
• Good communication skills
• Be flexible with working requirement and timing

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in CMP equipment tools
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Your Role

We are looking for an experienced Maintenance & Service Engineer/ Welding Engineer/ Senior Technician responsibility for support troubleshooting and repair work on welding machine. You will perform preventive maintenance on machines and cost reduction. Support new equipment installation and major periodic maintenance activities as required.

What Will You Do

• Support production troubleshooting and repair on welding machine
• Perform preventive maintenance on machines and cost reduction
• Support new equipment installation and maintenance activities
• Other ad-hoc duties assigned by manager

What Do We Want

• Min Diploma & above in electrical and electronic/ engineering / equivalent.
• At least 1-2 years & above of experience in electrical and electronic/ in service of welding products/system background.
• A team player with good communication and interpersonal skills.
• Willing to travel overseas as needed.

What Will You Get In Return
You will be given exposure to a hold a key position in a growing organization with attractive rewards and a wide range of benefits. You will entitle a Gross salary up to S$3300 + attractive perks.

What You Need to do Now
Click "Apply" and please include the following information in your resume:

• Personal Particulars with recent photograph
• Education background
• Work experiences in point forms
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

Note:
Only shortlisted candidate will be notified via email for an interview invitation

Responsibilities

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples.
• To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples.
• Review and align electrical design drawings to ensure compliance with design specifications and guidelines.
• Knowledge in M&E and able to identify discrepancies between M&E, structural, ID, architectural and client provisions.
• Manage and execute project as per the deadline.
• Attend meeting with contractors to address issues and update progress.
• Study and review drawings, specifications for compliance.
• Allocate work and ensure jobs are correctly and properly achieved within standards and SOP.

Requirements:

• Diploma / Degree in Electrical Engineering
• At least 5 to 8 years of relevant experience
• Candidate with more than 10 years of relevant experience will be considered for Senior position
• Preferably candidate with relevant working experience in the Construction Industry
• Good knowledge of M&E specifications & requirements
• Good working attitude and a team player
• Proficient in Microsoft Office

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standards pertaining to project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents, and weekly update drawing register form documents controller and distribute to project Quality Assurance personnel.
• Administrates the project's internal quality audit to ensure compliance with the project quality plan.
• Monitors the inspection and documentation activities of the Quality Assurance Inspector to ensure compliance with the inspection test plan and project quality requirements
• Resolves quality-related issues arising from subcontractor and in-house production
• Ensures protection and preservation of various systems
• Ensures updates on electrical completion and mechanical completion progress in the project database
• Assigns the systems to be tested by the various supervisors and technicians involved in the operation
• Reviews the quality work processes to enhance efficiency and productivity
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, Quality Assurance Department, and vendors
• Reports non-conformance and issue improvement notes where necessary
• Any other assigned duties and responsibilities

Requirements:

• Degree in Naval Architecture, Marine and Offshore or Electrical Engineering
• Minimum 3 years of relevant experience in Quality Assurance working experience, and the offshore or marine industry

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

NCS is the leading technology services firm that operates across the Asia Pacific region in over 20 cities, providing consulting, digital services, technology solutions, and more.

We believe in harnessing the power of technology to achieve extraordinary things, creating lasting value and impact for our communities, partners, and people. Our diverse workforce of 12,000 has delivered large-scale, mission-critical, and multi-platform projects for governments and enterprises in Singapore and the APAC region.

We’re searching for a Senior Service Delivery Manager to be part of our diverse team of talent here at NCS!

If you believe in going above and beyond, embodying excellence, and bringing people and technology together like never before, we would love to have a conversation with you!

What we seek to accomplish together:

• Gather business and/or application requirements on the infrastructure to plan, design, install, test & implement systems in accordance with the specifications & service level.
• Aligned or enhanced ITSM/ITIL methodologies in daily operations e.g. Change, Incident, problem, release management & CMDB.
• Monitor & measure the performance & availability of systems proactively; implement corrective actions identified to improve performance & service level availability.
• Respond promptly to incident, root cause analysis & provide temporary and/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.
• Ensure service level meet requirement. Propose and implement action plan when required.
• Implement service continuity measures, i.e., backup/restore procedures & disaster recovery plan, to ensure continuous operation of the business.
• Create and maintain comprehensive documentation for all FM operations.
• Assist in preparation of proposals and solution presentations.
• Able to manage a large diversified full fledge IT teams, ranging from helpdesk, desktop, operators, systems, network, middleware, database.
• Attain key certifications for partnership with key vendors.
• Technical project management experience and mentor to junior team lead and engineers.
• Lead and manage database changes through change request process & provide status reports to the relevant parties.
• Lead and monitor & measure the performance & availability of databases proactively; implement corrective actions identified to improve performance & availability.

A little about you:

• Able to lead, develop and maintain respectful and trusting relationship
• Proficient in written and spoken English
• Comfortable with 24 x7 standby work arrangements
• Self-motivated with a positive “can-do” attitude, creative with excellent presentation, communication, negotiation and interpersonal skills including strong persuasive techniques.

What you might also need to have:

• Minimum 5 years IT project management experience
• Experience in the development, implementation and operation support of information technology projects in a range of organizations
• Degree in Information Systems or equivalent
• Certification in PMP / CITPM/ ITSM / ITIL V3 or above

As Asia’s leading technology services firm, NCS as part of the Singtel Group, aims to create sustainable value for all our stakeholders. We aspire to create the extraordinary, to impact millions of people every day, and to create a positive impact on our environment. Our sustainability strategy sets out the key Environmental, Social and Governance (ESG) areas that aim to create the NCS impact for our clients, our people and our future.

We Grow our People, Value our Clients, and Create our Future.

We want to change the way we live and work for the better, to create new and sustainable business growth, and to foster an inclusive future for all.

You can find out more about our Group’s sustainability focus to guide how you can contribute to our objectives at Sustainability Reports.

About NCS Group

We believe in building a talent-led delivery model to enable our best people to lead, and to support them with the right structure, processes, and tools to ensure that our clients are delivered top quality services. Great work is never done alone, which is why we also believe in fostering a collaborative work environment where people with different expertise and talent can come together.

We’re here to make the extraordinary happen.

Find out more at ncs.co and our LinkedIn career site.

We handle all profiles with the highest level of confidentiality.

Responsibilities:

• Perform front desk duties such as attending to patients’ registration, crowd control, answering phone calls for appointments, responding to questions, and assisting with doctors’ needs.
• Dispensary of medication.
• Handle TPA (Third-Party) Claims, Medisave Claims, Insurance Claims, and other documentations.
• Draft referral and reply letters to general practitioners (GPs).
• Follow doctor during procedures (scopes) and type reports based on findings.
• Oversee and establish inventory standards for medications, supplies, and equipment, including stock-taking and ordering.
• Guide new staff with the clinic duties.
• Other duties as assigned.

Job Description:

• Responsible for providing excellent customer service and support through rendering assistance to callers by addressing their queries, feedback and requests
• Understands the information provided and advises the callers on appropriate actions to be taken in accordance with the established Standard Operating Procedures (SOP)
• Identifies and executes appropriate solutions to address customer queries, feedback and requests
• Coordinates and activates the relevant parties to ensure callers are assisted to meet the expected services standards
• Record the nature of calls, activations and assistances rendered in the Daily Occurrence/clients’ system
• Abide by safety and/or security standards in the workplace according to organisational Workplace Safety and Health (WSH) practices

Job Requirements:

• At least GCE ‘O’ Levels or equivalent
• 2 years of working experience in the customer service or Control Centre roles is preferred
• Excellent customer service and communication skills
• Proficient in Microsoft Office tools (Excel and Word)
• Advantageous if applicant holds a valid Singapore Class 3 driving license.

We regret that only shortlisted candidates will be notified.

Thank you for applying.

Job Responsibilities:

• Responsible for handling food and beverage orders and serving guests
• Provide friendly, excellent service to all guests.
• Ensure cleanliness of restaurant
• Ensure compliance with SFA regulations
• Any other ad-hoc duties assigned by Management and/or immediate superior

Job Requirements

• No Experience are also welcome
• Candidates who possess a Food Hygiene certificate will have an added advantage
• Team player with a good learning attitude and keen interest to develop professionally in specialty coffee industry
• Able to work under pressure in a fast-paced environment
• Self motivated with good people skills
• Willing to work shift hours, weekends and Public Holidays

Customer Service Officer - Call Center (Banking)

Role: Shifts role (Morning and Afternoon Shifts)

Job Requirement:

• Comfortable with using computer applications and tools.
• 1 to 3 years of experience in customer-facing roles (front or backend)

Job Role and Responsibilities:

• Achieve set Customer Center targets (KPIs) while upholding service quality.
• Ensure accuracy and compliance for customer requests.
• Promote the Bank's products and services through cross-selling.
• Assist customers in transitioning to the Bank's digital platform based on their preferences.
• Uphold professional standards when interacting with customers
• Demonstrate flexibility in work deployment as needed.
• Assist Operations in managing customer requests and transactional follow-ups.
• On the job training will be provided.

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

Recruitment Manager

Hand Phone: +65 92333815

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

The Workplace Experience team supports the frontline operations and communications outreach across the three primary locations. The proposed manpower will be required to operate on-site services and the scope of work, but not limited to, is as follows:

• Provide on-site support various teams within organization
• Provide on-site frontline concierge service
• Provide on-site support for room and AV/IT systems management
• Support with provision of office supplies and employee indents through vending and parcel locker machines at the three primary locations when needed.
• Provide administrative and operational support for the daily topping up and up-keeping of pantries located at various floors across three primary locations.
• Manage the daily operations of the gym, including timely follow-ups on any maintenance works required to the infrastructure.
• Provide administrative support and content to drive the monthly promotion
• Provide administrative and operational support to plan, organise and conduct up to two monthly complimentary employee-related initiatives to improve employee productivity across the three buildings, such as sourcing and deployment of food trucks.
• Provide on-site wayfinding/assistance (e.g. lost-and-found) for public visitors at the Public Concierge, the proposed manpower will escalate the service requests/status enquiries/feedback to the middle office via the Employee Relationship Management System (ERMS) for case resolution
• Provide logistics and AV support for events organised within the three primary locations when needed.

Requirements:

• Diploma in Business Management or relevant discipline
• Strong service excellence mind-set
• Good knowledge of Microsoft Office software/applications (e.g. Excel) will be advantageous

Other Information:

• Location: Bukit Gombak, Hillview & Depot Road (Deployed to 1 location)
• Salary: $2,200 - $2,700
• Performance Bonus
• 14 Days Annual Leave
• Duration: 1 Year (renewable yearly up to 5+5 Years)
• Working hrs: Monday to Friday: 8.30am to 6.00pm (Hours might be staggered subjected to team lead)

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to RMA Groups’s PDPA and e2i’s PDPA.”

Service Crew (Café)
$2,000 - $2,600 (full time), $10 - $12/hour (part time)

Job Responsibilities:

• Greet customers courteously and assist them with their orders, if needed.

• Prepare and serve beverages consistent with company’s quality standards.
• Serve customers with their food.

• Maintain beverage making appliances/equipment in a functional and clean manner to support efficient beverage making.

• Perform cashier’s duties

• Clean and maintain the café areas including washing of table wares etc
• Assist in the stocking and replenishment of beverage supplies.

• Follow the company’s security & safety procedures, hygiene & service practices.

• Perform any other duties as and when required by the Management.

Job Requirements:

• Preferably with 1 years’ relevant experience and a valid food safety course level 1 certificate.

• Minimum secondary school education

• Willing to work on weekends and public holidays (for part time staff: Thursday – Sunday full shift). Shifts: 9am – 6pm and 12 – 9pm.
• Able to work independently and support other team members proactively

in a fast-paced environment

Benefits:

6 off days per month (full time)

Uniform and duty meal provided
Birthday Leave

Please attach your resume via Whatsapp: 9070 0919 or email: [email protected]