Responsibility

· Responsible to develop and review electrical design plans, specifications, and construction documents for the project.

· Provide technical guidance and ensure that electrical systems are designed and installed according to project standards and codes.

· Collaborate with various stakeholders to ensure that electrical systems are integrated correctly into the building design.

· Review shop drawings, submittals, and RFIs related to electrical systems and equipment

· Conduct site visits and inspections to ensure that electrical systems are installed correctly and according to the design plans and specifications.

· Manage the commissioning and start-up of electrical systems and equipment, including testing and troubleshooting.

· Provide technical support to the construction team, including addressing technical issues, resolving conflicts, and managing change orders related to electrical systems.

· Review engineering designs and calculations to ensure compliance with all relevant codes, standards, and regulations.

Requirement

· Diploma/ bachelor’s degree in electrical engineering or a related field

· Minimum 2 years of related working experience/industry in electrical engineering

· Knowledge of electrical systems, including power distribution, lighting, fire alarm, and other related system.

· Proficient in AutoCAD, BIM, REVIT, BIM and Microsoft Project

· Able to work on construction/outdoor conditions.

Job Description:

1.Prepare shop-drawings and follow-up subsequent comments.
2.Attend project safety meeting and site co-ordination meeting.
3.Arrangement of work according to Builder's work program.
4.Schedule and arrange site acess arrangement for delivery.
5.Monitor materials delivery schedule.
6.Monitor daily work progress and feedback.
7.Implement variation work upon receiving new drawings.
8.Conduct follow up site testing.
9.Update construction drawing and follow up with draughting update.
10.Commissioning of project equipment.
11.Prepare as-built drawings, operation and maintenance manual.
12.Carry out duties in accordance with QEHS policy, procedures.

Job Requirement:

1. Able to supervise Sub-con / supplier.
2. Familiar with project supervision.
3. Knowledge of electrical contracting.
4. Able to work under tight schedule.
5. Attend co-ordination meeting.

We need Engineer experienced in Singapore for 2 years. Responsible for all aspects of underground work including cable pulling, installing instruments & threaded rod; install CMS, trunking, tray, ladder rack, confined space entry, small power, and lighting, terminating and gladding SWA.· Examined installations and observed operations to ensure conformance to design and equipment specifications, and provided technical assistance to field personnel in the areas of high voltage distribution equipment and high voltage motors/generators Purchased and maintained office supply inventories, and always careful to adhere

Roles & Responsibilities

Degree in civil or mechanical engineering, expeienece in micro piling works, ground improvement works, jet grouting works, soil nailing, able to work day and night shift, taking care of site safety and prepare risk assesment (RA) based on job requirments. Assisting quanitity surveyour for tender and monthly progress claims.

Selected Candidates to carry out, or supervise, inspections, maintenance, testing and checks according to the rules and procedures in order to release the aircraft to service.

Key Responsibilities

• Inspections

To carry out or supervise technical handling of an aircraft, within the scheduled ground time, according current carriers instructions

Activities:

1. Performs the checklist according to the aircraft type and carriers instructions
2. Inspects the performed duties
3. Signs the required logbook ( e.g. AML/CML + BOW) for maintenance release

• Analying defects and complaints

Activities:

1. Checks pre-arrival information on aircraft status, from crew and/or Maintenance Control Center
2. Contact flight crew directly after arrival for debriefing
3. Checks logbooks for open items
4. Analyses defects and complaints (trouble shooting)
5. Decides if defects and complaints can be deferred or rectified immediately
6. Informs and consults home base and Maintenance Manager or duty Engineer/Service Manager/Operations/Crew upon actions to be taken

• Repair, technical handling and modifications

To carry out or supervise maintenance and repairs of the aircraft

Activities:

1. Ensures availability of work instructions (checklist)
2. Ensures correct and adequate stock control (spare parts and materials) and maintenance of ground equipment (if applicable), in accordance with company procedures
3. Plans and organises the repair process and deploys Mechanics
4. Performs or supervises repairs and technical handling
5. Communicates with home base and Service Manager/Operations/Crew about the progress of the repair or the modification process.
6. Inspects the repairs and modifications
7. Perform flight duties or relief duties to other station when required

• Administration

Activities:

1. Performs all administration related to the technical handling of the carrier, according to instructions by the carrier
2. Updates Station Information File
3. Carry out station related tasks assigned by Maintenance Manager.

• Supervision of Mechanics

Activities:

1. Checks if duties are performed under safe conditions
2. Trains Mechanics

• Knowledge and Experience

1. Is holding of EASA B1 or B1/2 AML
2. Is certifying staff according to EASA 66 Cat. B1 or B1/2
3. Possess either or multiple ratings of A320,A330,A350,B777,B744,B787
4. Preferably has at least 2 years of experience as a certifying engineer
5. Reads, writes and speaks English
6. Has sufficient knowledge about specific operator- and type- procedures including customer demands
7. Has the proven ability to quickly and accurately identify more complex issues and problems that require thorough analysis
8. Is able to envisage the broader consequences of various decisions
9. Is able to arrive at a sound judgement in the face of conflicting facts and ambiguous information

• Behavioural Competencies

1. Concern for Excellence
2. Customer Service Orientation
3. Drive
4. Integrity
5. Judgement
6. Self Confidence

Electrical engineers design, develop, test, and oversee the manufacturing of electrical equipment and systems. They also manage projects, ensure safety standards are met, and collaborate with other engineers and technicians. Some of their responsibilities include:

• Designing systemsElectrical engineers design electrical systems for a variety of applications, including automobiles, aircraft, and power generation equipment. They also design and draft construction drawings.
• Managing projectsElectrical engineers manage engineering projects, including timelines, resources, and teams. They also track work progress to ensure projects are delivered on time and meet specifications.
• Ensuring safetyElectrical engineers ensure that installations and applications meet safety standards and are in line with customer needs. They also carry out work in accordance with safety procedures.
• CollaboratingElectrical engineers often collaborate with teams from other departments, so they need to be able to communicate complex ideas clearly.
• Analyzing performanceElectrical engineers perform quality and performance analysis on new and legacy systems. They also summarize data and report on test results.
• Preparing budgetsElectrical engineers examine the needs of new equipment, calculate costs, and help prepare budgets.

Electrical engineers should have strong organizational and communication skills, as well as problem-solving abilities, attention to detail, and a deep knowledge of electrical engineering codes and safety standards.

• Designing electrical systemsElectrical engineers design electrical systems for aircraft, automobiles, and other applications. They also design and test components to create functional electrical systems.
• Managing projectsElectrical engineers manage engineering projects and ensure they are delivered on time.
• Developing manufacturing processesElectrical engineers develop manufacturing processes that adhere to global engineering codes and standards.
• Collaborating with othersElectrical engineers often work with teams from different departments, so they need to be able to communicate complex ideas clearly.
• Problem-solvingElectrical engineers need to be able to solve complex problems using analytical and critical thinking skills.
• Staying up to dateElectrical engineers need to be aware of current trends and changes in the field so they can offer the best solutions to their clients.
• Ensuring safetyElectrical engineers need to ensure that installations and applications comply with safety standards. They may also conduct safety inspections.

Job Description

The job involves the supervision of MRT projects Cross Island Line

Job Requirements

RE shall have minimum 4 years of relevant experience as a civil engineer, of which minimum 2 years in supervision of deep excavation/basement works..

- Registered as RE Cert accredited by the Institute of Engineers Singapore (IES)/Association of Consulting Engineers Singapore (ACES).

- MRT experience will be an advantage.

Monday to Friday

730am - 5pm

Location: Tanjong Penjuru

Responsibilities

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas.
• Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary.
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Requirements

• Minimum 5 years working experience in manufacturing environment (main criteria)
• Able to supervise and lead the subordinates.
• 3Willing to work after working hour or during non-working days.
• Able to work under pressure.
• 5Computer literate.
• Knowledge in ISO is an advantage.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Devon Yang Yue Teng | EA Personnel No.: R24123723

Job Description

• Plan and execute all scaffolding works with accordance to SS:CP14
• Liaise and coordinate internally with Clients and Contractors
• Comply to Company’s safety policy and safety management system and to enforce legislated safety requirement and the Company’s safety rules and regulations at site
• Supervise workers at site
• Identify the type of required scaffolding for the job

Job Requirements

• NITEC/Certificate in Marine Metal Scaffolding Certificate for Supervisors (MMSC)
• Minimum 3 years of experience in marine and offshore industry is preferred
• Possess good knowledge of WSH Scaffolding Regulations/Code of Practices, Association of Singapore Marine Industry (ASMI) Scaffold guidelines
• Must have Marine Metal Scaffold Supervisor course
• Strong planning, interpersonal and communication skills

R1552011

Peak Ocean EA License No. 18C9336

Key Responsibilities:

• Overseeing projects at one or multiple stipulated sites.
• Assist project manager is the execution of the projects.
• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.
• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.
• Monitor and ensure progress of works are carried out according to project specification.
• Design schematic drawing, layout drawing, P&ID drawing.
• Review and check drawing before submit to main contractor.
• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.
• Support project manager in the administration of contract, claim, variation and any dispute arise.
• Raise MR and order material & arrange manpower for necessary works.
• Advise site team for work schedule and technical issues.
• Make sure project is carried out according to schedule.
• Responsible for site supervision and implementation.
• Responsible for ensuring implementing safety measures.

Requirements:
- Minimum diploma
- 3 years or above experiences in ACMV, especially in air-conditioning industry
- Able to use AutoCAD or other related software for ACMV Design
- Able to communicate Fluent in English
- Minimum 3 years in ACMV Sector

Why Patients Need You

Whether you are involved in the design and development of manufacturing processes for products or supporting maintenance and reliability, engineering is vital to making sure customers and patients have the medicines they need, when they need them. Working with our innovative engineering team, you'll help bring medicines to the world even faster by imagining what’s possible and taking action.

What You Will Achieve

Working with Pfizer’s dynamic engineering team, you will play a critical role in developing and modifying process formulations, methods and controls to meet quality standards. Your production engineering skills will help in recommending and implementing improvements, modifications or additions that will help in solving problems. You will review product requirements in terms of product development compatibility and help Pfizer determine optimum costs and schedules of production.

As a Senior Associate, your knowledge and skills will contribute towards the goals and objectives of the team. Your focus and ability to meet team targets will help in completing critical deliverables. Your innovative use of communication tools and techniques will facilitate in explaining difficult issues and establishing consensus between teams.

It is your hard work and dedication that will make Pfizer ready to achieve new milestones and help patients across the globe.

Position summary

Senior Process Engineer serves as a member of new product introduction team will be responsible for leading product manufacturing campaigns from the start of production, providing technical supervision with respect to quality and EHS until completion and release of the material.

The core role of this position is responsible to work with various stakeholders to assess the robustness of transferring processes and analytical methods to successful completion of New Product Introduction (NPI) technical transfer project, with associated risk reduced to an acceptable level.

Position responsibilities

Process Engineering

• Develop Manufacturing / Operating Instructions and necessary Standard Operating Procedures.
• Develop, maintain and troubleshoot the process control system recipe / models.
• Carry out technical assessment for evaluation of processes.
• Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
• Develop, implement and monitor robust preventive measures for processing issues.
• Play a pro-active role in ensuring the site safety and quality standards are adhered to.
• Proactively monitor, identify, develop and implement improvements in processes and equipment.
• Communicate on a regular basis to the plant personnel on process updates.
• Train the process technicians on the process and procedures as required.
• Own one or more multiple equipment / GMP systems in production and present the system overview with evidence compliance to internal and external auditors.

Organizational relationships

• Internal: Engineering, Process, Technical Services, Quality Operations
• External: Sending Site Subject Matter Experts

Qualifications

Must-Have

• Degree in engineering, preferably chemical engineering pr degree in science with major in chemistry.
• 3+ years of experience in a relevant manufacturing environment

Core competencies

• Process Engineering and Technical Knowledge
• Strong sense of commitment and dedication, with sense of urgency to get things done and results-drive attitude.
• Excellent interpersonal and communication skills, both verbal and written
• Strong team player, adaptable and versatile with the ability to work across different cultures.

Our client is in the smart factory, looking for an IoT Engineer in the west. The role involves constructing, managing, and sustaining the IoT platform. Additionally, you will be tasked with enhancing the IoT platform's performance and diagnosing data flows within the organization.

Candidates with some IoT Background and good experience in JavaScript, C/C++ for application and dashboard developments will be prioritised.

Responsibilities:

• Lead the development, implementation, and oversight of the IoT platform, encompassing the In-House IoT Platform, PTC Kepware, and PTC ThingWorx.
• Formulate and execute interfaces connecting PLCs to pipelines.
• Arrange and optimize IoT Docker containers for applications deployed within the private cloud system.
• Define requirements for PLC/Socket/DB to DB interfaces in collaboration with field engineers, facilitating pipeline testing, monitoring, and optimization.
• Collaborate closely with team members, including Developers, DBAs, and Server Engineers.

Requirements:

• Possess a Bachelor's degree or higher in Computer Engineering, Electrical Engineering, Computer Science, Industrial Engineering, or a related field.
• Have hands-on experience in PLC and IoT platforms.
• Demonstrate proficiency in designing and operating PLCs.
• Be familiar with SCADA and exhibit expertise in standard communication protocols (OPCUA/S7/TCP/UDP/Ethernet/Modbus/Profinet).
• Be proficient in IoT Platform, particularly with expertise in PLC (Siemens), PTC Kepware/ThingWorx, and Linux OS.
• Exhibit technical proficiency in scripting languages like PowerShell, Bash, Linux, etc.
• Possess knowledge in IaaS/PaaS, Database Management (Oracle, Tibero, SQL, etc.).
• Good to haves: technical skills in Docker, CI/CD Pipeline, C#, Java, JavaScript, Spring Boot, and Vue.js.

2 Rounds of interview, total duration from interview to offer, 1.5-2 months on average.

(Subject to both candidate and HM availabilities)

Key Responsibilities:

• Assist with the management of a portfolio of projects.

• Support the preparation of the detailed list of materials required for each project.

• Plan the schedule of a few teams to allocate them efficiently to the worksites.

• Ensure the assigned teams complete works as scheduled on worksite to avoid delays.

• Ensure all works are performed in accordance with the prevailing safety and quality standards.

• Conduct site visits and provide assistance to teams on site as and if required.

• Prepare worksite reports to the management, assist the quantity surveyor for the claim reports.

• Monitor all changes to specifications and work scope and liaise with Quantity Surveyor to issue variation order.

• Manage all site document filing and record keeping and issue an end of project report.

Requirements & Qualifications:

• Degree in Civil Engineering/Building or equivalent.

• Preferably 2 years of experience in the construction industry.

• Well organised and capable of efficient planification.

• Problem solving and communication skills.

• Fluent oral and written English.

• Class 3 driving license preferred.

1.Performing routine maintenances procedures and trouble shooting equipments breakdown.

2.Operation monitoring and layout of projects .

3.Develop and implement of maintenance programs .

4.Reviewing work orders and prioritizing workload.

5.Documenting completed tasks and preparing claims.

6.Reading, analyzing, and interpreting technical procedures, electrical schematics, blueprints, service manuals, and work orders to perform required maintenance work.

7.Assist with Inspections.

Major Responsibilities:

• Responsible for setting up / establishing the Electronic Batch Records
• Responsible for manufacturing process technical support and improvement initiatives for ongoing operations
• Support start-up and assist in plant equipment and facility validation and qualification activities
• Supports manufacturing activities during the technology transfer, qualification and validation batches associated with new product introductions to the site
• Supports operational efficiency goals for yield, product quality and other product and/or site KPI’s
• Contact and consultant for process/equipment troubleshooting and investigation activities
• Supports risk assessment activities providing relevant technical knowledge
• Provides support for process cleaning/changeover strategies
• Authors technical reports, batch records, SOP’s, investigations, protocols as required and ensures consistency and quality of the group’s documentation

Education/Experience:

• Min Degree in Chemical Engineering
• 5 years of experience (preferably), in the area of API Manufacturing (Technical Engineer) or Manufacturing, Science and Technology (MSAT)

Interested candidates please send a copy of your resume in MS Word to

[email protected]

EA Personnel: Alvin Lee Peck Keong

CEI No.: R1104781

Recruit Express Pte Ltd, EA License No.: 99C4599

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on a research project, funded by Singapore Ministry of Education (MOE), where you will be part of the research team to develop a scalable and comprehensive framework for formal verification of quantum programs. The framework consists of the following deliverables:
• Intermediate Language. We plan to develop an intermediate language to model quantum programs. The intermediate language would be complete to describe all the desired characteristics of quantum computing while at the same time simple enough to be understood by most programmers.
• Formal Verification Framework. We plan to develop a comprehensive framework to verify the correctness of quantum programs written in the proposed intermediate language.
• Mechanization. We plan to mechanize the formal framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
• Proof Automation. We plan to develop formal methods for automatic reasoning that can be materialized into commercial tools.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI) and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  1. develop an intermediate language to write quantum programs.
  2. develop a comprehensive framework to verify the correctness of quantum programs written in our intermediate language.
  3. mechanize the verification framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
  4. develop formal methods for automatic reasoning that can be materialized into commercial tools.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of formal methods (including theorem proving and model checking, especially theorem proving), quantum computing, and software analysis/verification.
• Have a degree in computer science, computer engineering, or related areas. Possessing a Master’s or PhD degree will be advantageous
• Knowledge of separation logic and quantum program analysis/verification will be advantageous.

Key Competencies:

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges:

As quantum computers are operated in extreme physical conditions and thus the cost per run is significantly high, it is desirable to verify the correctness of a quantum programs before the execution. However, the verification task of quantum programs is challenging due to the following reasons:

• Quantum programs (even written at high-level languages) are complicated to comprehend as it requires a good understanding of quantum mechanics and the relevant advanced mathematics.
• The quantum states are exponentially huge in size because the state of a classical bit is either 0 or 1 at any time, while the state of a quantum bit (qubit) can be in the superposition, where both states 0 and 1 can co-exist simultaneously. This induces the state explosion problem for brute-force-like methods.
• Quantum states are naturally probabilistic thus may yield different results on different runs, which is challenging for the testing and debugging methods.

What We Do

At Goldman Sachs, our Engineers don’t just make things – we make things possible. Change the world by connecting people and capital with ideas. Solve the most challenging and pressing engineering problems for our clients. Join our engineering teams that build massively scalable software and systems, architect low latency infrastructure solutions, proactively guard against cyber threats, and leverage machine learning alongside financial engineering to continuously turn data into action. Create new businesses, transform finance, and explore a world of opportunity at the speed of markets.

Goldman Sachs Electronic Trading (GSET), is at the critical center of our business, and our dynamic environment requires innovative strategic thinking and immediate, real solutions. Want to push the limit of digital possibilities? Start here. We’re open to talent in Hong Kong, Singapore, Melbourne, Sydney & Tokyo.

Who We Look For

Goldman Sachs Engineers are innovators and problem-solvers, building solutions in risk management, big data, mobile and more. We look for creative collaborators who evolve, adapt to change and thrive in a fast-paced global environment.

Technology is at the heart of our multi-billion dollar business. Our engineers develop low latency, scalable, and resilient solutions which drive global equities sales and trading at Goldman Sachs.

Equities Engineers focus on designing, developing and maintaining the global infrastructure which underpins Equities sales and trading at Goldman Sachs. These engineers work across a variety of problem domains and software stacks to create leverage in our various Equities cash and derivatives business lines. These problem spaces include:

• High-throughput, low latency order management and electronic trading platform
• Client Connectivity of all clients to the various GS platform via FIX
• Exchange Connectivity of all the various Asia Exchanges using native exchange protocol for trading connectivity and market data connectivity
• Adaptable algorithmic trading platforms
• Smart Order Routing and Internalization Trading Platform
• Adaptive, robust trading controls
• Workflow management platforms
• Pricing, risk and booking systems

HOW YOU WILL FULFILL YOUR POTENTIAL

• Systems software
• Compilers
• User interfaces and modern webstacks
• Data, structured and unstructured
• Pricing, risk and analytics
• Test engineering
• Software controls and SDLC

SKILLS AND EXPERIENCE WE ARE LOOKING FOR

• Solid industry experience programming in Java, C++, C
• Clear understanding of algorithms and data structures
• Familiarity with core programming concepts and techniques (e.g. concurrency, memory management)
• Comfort with standard SDLC tools, e.g. version control systems, diff-ing tools
• Strong written and oral communication skills
• Enthusiastic, proactive and driven individual with high degree of attention to detail
• Experience with several of the following: -Low latency development -OMS development -Real-time systems -Large-scale, distributed systems -Operating systems design -Compilers -User interface technologies -Modern webstacks -Databases -Functional programming -Test engineering

Preferred Qualifications

• Bachelor’s degree / Master’s degree in Computer Science, Computer Engineering or related field
• Experience developing in a Linux or UNIX environment
• Experience in a hands-on front-office development role

ABOUT GOLDMAN SACHS

At Goldman Sachs, we commit our people, capital and ideas to help our clients, shareholders and the communities we serve to grow. Founded in 1869, we are a leading global investment banking, securities and investment management firm. Headquartered in New York, we maintain offices around the world.

We believe who you are makes you better at what you do. We're committed to fostering and advancing diversity and inclusion in our own workplace and beyond by ensuring every individual within our firm has a number of opportunities to grow professionally and personally, from our training and development opportunities and firmwide networks to benefits, wellness and personal finance offerings and mindfulness programs. Learn more about our culture, benefits, and people at GS.com/careers.

We’re committed to finding reasonable accommodations for candidates with special needs or disabilities during our recruiting process. Learn more: https://www.goldmansachs.com/careers/footer/disability-statement.html

© The Goldman Sachs Group, Inc., 2023. All rights reserved.

Goldman Sachs is an equal employment/affirmative action employer Female/Minority/Disability/Veteran/Sexual Orientation/Gender Identity

Duration: 1 to 1.5 months

Working Locations: Metropolis (Main) + Jurong island (Suraya), Bukom (Bus pickup availability for Jurong island/ Bukom)

Working Hours: Mon to Fri, office hours

Salary: Up to $2700

Job Description

• Provide basic IT support for internal users
• Responsible for maintenance of all mechanical and rotating equipment
• Provide documentation to ensure all equipment, technical records and drawings are updated to reflect the latest changes, proper and correct procedures are followed, configuration and software changes to mechanical equipment are documented, archived, and backed up for recovery.

Requirements:

• NITEC in Engineering or IT related discipline
• Flexible with roaming to multiple sites
• Candidates with both Engineering & IT experience (Technical Interview) required
• Knowledge of local regulatory requirements from Ministry of Manpower for workplace safety and equipment governance is an advantage.
• Experience in field work interfacing and stakeholder’s engagement.
• Excellent communication, analytical, problem-solving, and troubleshooting skills.
• Able to work in Team environment as well as standalone when need arises.

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

TikTok will be prioritizing applicants who have a current right to work in Singapore, and do not require TikTok's sponsorship of a visa.

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

About the Team

The team use the most advanced AI technology to combat various risks/violations in TikTok's e-commerce platform, maintain platform security, build a good e-commerce ecosystem, and empower business teams to improve work efficiency. We pursue the ultimate risk detection capability. The fairness and sustainability of the e-commerce ecosystem, high-quality content and merchandise are areas where we are constantly striving for improvement.

We are looking for talented individuals to join us in 2025. As a graduate, you will get unparalleled opportunities for you to kickstart your career, pursue bold ideas and explore limitless growth opportunities. Co-create a future driven by your inspiration with TikTok.

Candidates can apply to a maximum of two positions and will be considered for jobs in the order you apply. The application limit is applicable to TikTok and its affiliates' jobs globally. Applications will be reviewed on a rolling basis - we encourage you to apply early.

Responsibilities

- Responsible for using algorithms to mine, identify, and predict risks and low-quality merchants, products, and creators in e-commerce scenarios, and assist businesses in managing and controlling them.

- Responsible for using algorithms to identify events and behaviors that affect product experience and efficiency, and building data models to help create a favorable ecosystem and support business operations.

- Participate in building data for various entities such as e-commerce live streaming/video, products, merchants, and creators, building large-scale network/feature sequence models to support business scenarios such as content understanding, multimodal representation, community mining, and solve problems related to products, live streaming, and video management, and provide support for them.

- Participate in building a large-scale graph storage and graph learning platform to improve relationship building and governance within the TikTok e-commerce community.

- Explore and research cutting-edge technologies in machine learning/graph learning/sequence learning and related fields, implement these technologies in practical business scenarios, and support the production of scalable and optimised machine learning models.

Qualifications

Minimum Qualifications

- Final year Ph.D or recent Ph.D graduates in Computer Science, engineering or quantitative field.

- Solid coding skills, familiar with deep learning/graph neural network/machine learning frameworks such as PyTorch, TensorFlow, DGL, pyg, sklearn, etc.

- Familiar with one or more algorithms in machine learning/graph learning/sequence learning, such as graph modeling, timing signal modeling, node/subgraph classification, community mining, representation learning, self-supervised/semi-supervised learning, with a certain depth and breadth.

- Relevant industry experience with solid theoretical foundation of machine learning.

Preferred Qualifications

- Good sense of teamwork and communication skills, practical experience in relevant business scenarios is preferred.

- Published papers in high-level computer science conferences (ACL, EMNLP, NIPS, AAAI, etc.) or have competition experience are preferred.

- Familiar with the application of related algorithms in data mining, search recommendation, content understanding, and governance risk control preferred.

- Skilled in numpy and pandas for modeling experiments, familiar with big data tools such as Hive, Spark, Hadoop preferred.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

By submitting an application for this role, you accept and agree to our global applicant privacy policy, which may be accessed here: https://careers.tiktok.com/legal/privacy.

If you have any questions, please reach out to us at [email protected].

Working Location: Jurong
Working Days : 5 Days ( Mon- Fri)
Working Hours: 8am-5pm

Salary: $2600 - $2700

Job Description

• Desktop Technician will provide day to day local\remote desktop support, receive inbound calls, answer questions, troubleshoot and document steps performed to resolve challenges with hardware, software and application issues in a ticketing system.
• Facilitate customer resolution for calls and engage their supervisors and managers to ensure operational consistency across all shifts within the IT Support Center.
• Desktop Support Engineer provides Break Fix, fault diagnosis and resolution.
• Providing fault analysis to customer’s various core operating systems and platforms, as well be able to provide support and apply desktop fault resolution for the approved application suite.

Position Responsibilities and Functions

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issue status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system, to support Apple pc users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.
• Broad experience of IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms.
• This position requires the ability to work in a project-based environment requiring flexibility and teamwork. Performs other duties as assigned.

Qualifications and Skills

• Bachelor Degree or equivalent in Computer Science or related field.
• CompTIA A+, Microsoft Certified Professional (MCP) or better.
• 1-2 years’ experience in Windows Desktop support.
• Windows 7-10, Microsoft Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions, Helpdesk ticketing systems.
• Mobile device management including IOS and Android devices, Enterprise encryption solutions, Windows PC/laptop management via Active Directory.
• Proven analytical, troubleshooting and problem solving skills.
• Willing to work off-hours and weekends when required for projects or emergency support.

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

What We Do

At Goldman Sachs, our Engineers don’t just make things – we make things possible. Change the world by connecting people and capital with ideas. Solve the most challenging and pressing engineering problems for our clients. Join our engineering teams that build massively scalable software and systems, architect low latency infrastructure solutions, proactively guard against cyber threats, and leverage machine learning alongside financial engineering to continuously turn data into action. Create new businesses, transform finance, and explore a world of opportunity at the speed of markets.

Goldman Sachs Electronic Trading (GSET), is at the critical center of our business, and our dynamic environment requires innovative strategic thinking and immediate, real solutions. Want to push the limit of digital possibilities? Start here. We’re open to talent in Hong Kong, Singapore, Melbourne, Sydney & Tokyo.

Who We Look For

Goldman Sachs Engineers are innovators and problem-solvers, building solutions in risk management, big data, mobile and more. We look for creative collaborators who evolve, adapt to change and thrive in a fast-paced global environment.

Technology is at the heart of our multi-billion dollar business. Our engineers develop low latency, scalable, and resilient solutions which drive global equities sales and trading at Goldman Sachs.

Equities Engineers focus on designing, developing and maintaining the global infrastructure which underpins Equities sales and trading at Goldman Sachs. These engineers work across a variety of problem domains and software stacks to create leverage in our various Equities cash and derivatives business lines. These problem spaces include:

• High-throughput, low latency order management and electronic trading platform
• Client Connectivity of all clients to the various GS platform via FIX
• Exchange Connectivity of all the various Asia Exchanges using native exchange protocol for trading connectivity and market data connectivity
• Adaptable algorithmic trading platforms
• Smart Order Routing and Internalization Trading Platform
• Adaptive, robust trading controls
• Workflow management platforms
• Pricing, risk and booking systems

HOW YOU WILL FULFILL YOUR POTENTIAL

• Systems software
• Compilers
• User interfaces and modern webstacks
• Data, structured and unstructured
• Pricing, risk and analytics
• Test engineering
• Software controls and SDLC

SKILLS AND EXPERIENCE WE ARE LOOKING FOR

• Solid industry experience programming in Java, C++, C
• Clear understanding of algorithms and data structures
• Familiarity with core programming concepts and techniques (e.g. concurrency, memory management)
• Comfort with standard SDLC tools, e.g. version control systems, diff-ing tools
• Strong written and oral communication skills
• Enthusiastic, proactive and driven individual with high degree of attention to detail
• Experience with several of the following: -Low latency development -OMS development -Real-time systems -Large-scale, distributed systems -Operating systems design -Compilers -User interface technologies -Modern webstacks -Databases -Functional programming -Test engineering

Preferred Qualifications

• Bachelor’s degree / Master’s degree in Computer Science, Computer Engineering or related field
• Experience developing in a Linux or UNIX environment
• Experience in a hands-on front-office development role

ABOUT GOLDMAN SACHS

At Goldman Sachs, we commit our people, capital and ideas to help our clients, shareholders and the communities we serve to grow. Founded in 1869, we are a leading global investment banking, securities and investment management firm. Headquartered in New York, we maintain offices around the world.

We believe who you are makes you better at what you do. We're committed to fostering and advancing diversity and inclusion in our own workplace and beyond by ensuring every individual within our firm has a number of opportunities to grow professionally and personally, from our training and development opportunities and firmwide networks to benefits, wellness and personal finance offerings and mindfulness programs. Learn more about our culture, benefits, and people at GS.com/careers.

We’re committed to finding reasonable accommodations for candidates with special needs or disabilities during our recruiting process. Learn more: https://www.goldmansachs.com/careers/footer/disability-statement.html

© The Goldman Sachs Group, Inc., 2023. All rights reserved.

Goldman Sachs is an equal employment/affirmative action employer Female/Minority/Disability/Veteran/Sexual Orientation/Gender Identity

Roles & Responsibilities:

- Responsible for the design, development and commissioning support of

Pharmaceuticals DCS / PLC systems on site. Key technology will be Siemens. Any

exposure to Rockwell and Emerson DeltaV will be of advantage.

- Will participate in the development and implementation of Automation solutions in

line with S88 standards for the plant.

- Thorough understanding of Physical and Procedural Layer design, development and

qualification.

- Work with automation team to design system architecture, Design Specification,

Control Strategies, and library development.

- Strong understanding of CSV documentation for Pharma projects

- Supporting manufacturing operations for day today support for DeltaV system.

- Support on NC and CAPA and identification of root causes

- Continuous improvement of the system and support for Operations as required.

- Field commissioning of automation equipment’s.

- System administration and maintenance support.

- Computer system Validation and documentation support for automation systems.

- Interacting with Operations Team, Process Team, Equipment Vendors and Technology

providers.

Requirements:

· Minimum of 8-10 years’ experience in a similar role, ideally in the

Pharmaceutical industry.

· Experience in the Designing and commissioning of automation projects for

GMP manufacturing site.

· Through understanding of Batch S88 standards (CM, EM, Phases, Recipes,

Units etc)

· Understanding of Pharmaceutical or Biopharmaceutical process

· Understanding of automation hardware and networking technologies

· Siemens PCS7 or S7 with Batch exposure is required.

· Emerson DeltaV DCS Batch experience or Rockwell Pharma experience is

advantage

· Familiarity with SDLC and quality management processes in the pharma

· Ability to work well in a team environment.

· Able to manage multiple party coordination for automation information.

· Good communication and able to work remotely or onsite as required by

client.

$2,400 to $3,400
5 days
9am-6pm
Office location: Bukit Batok
Working location: Singapore Islandwide - Client site

Job description:

• Works with engineering, sales, and ops staff to understand standard component fabrication techniques, standard composite materials to use, and current demands of our customers to formulate design details for the sales staff and our customers.
• Responding to requests for technical queries with detailed analysis of the building management system, planning of project schedule and execution.
• Handle ACMV related equipment controls including control logic programming
• Check and ensure all installations conform to project specifications, and be able to manage system applications, drafting, database generation and commissioning of the systems
• Effective handling of project reviews and handling by conducting FAT(Factory Acceptance test), SAT(Site Acceptance Test).

Requirements

• Candidate to possess with a ITE, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.
• On job training provided

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:

1. Oversee, manage, and supervise Company’s in-house and external
Contractors for all mechanical maintenance works related to planning
and execution of:

(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance

2. Ensure all mechanical maintenance activities are carried out in
accordance to the Company’s HSEQ Standards & Maintenance
Management System, statutory requirements and best industry practices.

3. Establish, continually improve & execute Company’s maintenance
management system in a safe, efficient, and effective way to achieve
highest equipment reliability & availability objective.

4. Update and maintain accurate maintenance records in order to
provide good maintenance history for data analysis and troubleshooting
purposes.

5. Conduct root cause analysis to eliminate equipment/ system defect
and take appropriate preventive/ corrective measures.

6. Optimize & manage mechanical maintenance inventory level of critical
& non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580