• To assist Management in the development of business plans delivering diving and related assets to the field which conforms to the requirements of the organisation and provide diving market and technical expertise in support of diving operations as required by Company Senior Management and Clients.

• To provide diving technical advice and specialist expertise to management to enable them to meet their business objectives.

• To ensure that all aspects of Health, Safety and Environmental management are implemented by global diving technical support network.

• Establishes, monitors and enforces minimum operating and training standards.

• Distribution and assimilation of industry developments, improvements, notices and general diving-related information from the international diving community.

• Continually review diving system performance and utilisation and to recommend improvements to enhance performance.

• Provision of marketing and tendering support to Operations and Commercial on an as requested basis.

• Provide tender review expertise and services to the Commercial Manager on an as requested basis.

• Work with QHSE and Operations to develop training and staff development initiatives.

• Assist in the development of project specific diving procedures and plans.

• Interface with clients to facilitate client’s requirements for diving operations

• Prepare the annual diving investment plan, quarterly and monthly financial and utilisation reports.

• Manage the insurance arrangements as they relate to diving services and equipment and act as single point of contact between insurers and Commercial Management.

• Implements Company Safety Standards and Quality Management procedures throughout the global diving technical support structure.

• Responsibility for recruitment of global diving technical support staff to ensure that the business line has adequate resources to meet its objectives.

Core Responsibilities

• Liaise with Sales Department and other stakeholders to provide services to tenants
• Schedule appointments for clients
• Perform tenant check-in and check-out
• Perform payment collection procedures
• Manage tenants’ feedback and enquiries
• Perform service recovery
• Promote use of automated or self-help services
• Identify situations where tenant require additional attention
• Prepare meeting rooms
• Monitor inventories of stationaries
• Reconcile daily monetary transactions
• Participate in the execution of designated emergency response tasks

Requirements

• People orientated with excellent customer service skill
• Communication skills (written/verbal)
• Proficient in OPERA will be added advantage
• Able to perform rotating shift between Monday - Friday

To be able to read and understand hydraulic schematic

To have hydraulic troubleshotting knowledge

To be able to work onsite independently

To work with a team of service engineer and technician

To know how to repair hydraulic cylinders, pump and hydraulic power unit

Simple design of hydraulic system is an advantage

1. Committed to doing everything possible to prevent injuries and to maintain a safe and healthy environment.
2. To support OSH program and make safety and health a part of their daily routine and to ensure that they are following safe work methods and relevant regulations.
3. Resnpoisble for Order Processing support (order processing, customer order verifications & follow up with customer orders)
4. Prepare orders for Planner and follow-up with customers when there are incomplete information or documents
5. Coordination with booking agents or ship operators for status of supply schedule / vessel loading
6. Collaborate closely with the planner to ensure timely supply and corrdination.
7. Tally overall order received at the end of day to ensure all order is not missed out.
8. Ensure all delivery orders are received (arrange dispatch) once job completed and forward to customers as proof of delivery
9. Closing of job orders for billing once job is completed.
10. Handle customer complaints, provide appropriate solution and alternatives
11. Foster long-term, sustainable relationships with customers by maintaining open, transparent and interactive communication, thereby building trust and ensuring customer satisfaction.
12. Other duties as assigned.

Requirements:

• Good communication skills (both verbal & written)
• Capable to work independently and demonstrate a strong work ethic
• Demonstrate a positive attitude, showing flexibility and committment to being a supportive team player
• Able to analyze processes and identifying areas for improvement
• Capable of performing well under pressure during peak periods, and willingness to take on responsibility.
• GCE N Level, O Level or Professional Certificate
• 2-3 years experience in Logistic operations
• Proficient in MS Office

Benefits:

• Stable career progression
• AWS + PB
• Yearly Increment
• Training provided; no experience required

Job Description:

• Handle and facilitate the admission and discharge of patient’s visit.
• Appointment scheduling.
• Administration of patient’s records.

Interested candidates kindly email your updated resume to [email protected]

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.**

Megan Chan Xin Yi
Registration Number: R24123277
EA License No: 06C2859 (MCI Career Services Pte Ltd)

1. Committed to doing everything possible to prevent injuries and to maintain a safe and healthy environment.
2. To support OSH program and make safety and health a part of their daily routine and to ensure that they are following safe work methods and relevant regulations.
3. Resnpoisble for Order Processing support (order processing, customer order verifications & follow up with customer orders)
4. Prepare orders for Planner and follow-up with customers when there are incomplete information or documents
5. Coordination with booking agents or ship operators for status of supply schedule / vessel loading
6. Collaborate closely with the planner to ensure timely supply and corrdination.
7. Tally overall order received at the end of day to ensure all order is not missed out.
8. Ensure all delivery orders are received (arrange dispatch) once job completed and forward to customers as proof of delivery
9. Closing of job orders for billing once job is completed.
10. Handle customer complaints, provide appropriate solution and alternatives
11. Foster long-term, sustainable relationships with customers by maintaining open, transparent and interactive communication, thereby building trust and ensuring customer satisfaction.
12. Other duties as assigned.

Requirements:

• Good communication skills (both verbal & written)
• Capable to work independently and demonstrate a strong work ethic
• Demonstrate a positive attitude, showing flexibility and committment to being a supportive team player
• Able to analyze processes and identifying areas for improvement
• Capable of performing well under pressure during peak periods, and willingness to take on responsibility.
• GCE N Level, O Level or Professional Certificate
• 2-3 years experience in Logistic operations
• Proficient in MS Office

Responsibilities:

• Operate the Combined Cycle Power Plant safely, efficiently, and in accordance with established operational guidelines to meet output requirements.
• Prepare for, execute, and monitor the startup, shutdown, and routine operations of generation units and auxiliary systems.
• Carry out condition monitoring, review operating parameters, and correct deviations to maintain optimal plant performance.
• Identify, report, and rectify all system, plant, and equipment defects.
• Ensure adherence to the plant’s generation dispatch schedule, conducting operational tests and inspections as required.
• Respond to plant emergencies, equipment failures, and outages.
• Manage generating unit operations and maintenance activities, ensuring compliance with safety measures and specifications.
• Monitor work areas and inspect tools and equipment to detect and prevent unsafe conditions or violations of procedures and safety rules.
• Prepare daily shift log reports and other operational reports.
• Liaise with external agencies (e.g., EMA PSO, PUB, NEA, SCDF) on operational matters during shift duty.

Requirements:

• Nitec in Mechanical, Electrical Engineering or an equivalent discipline.
• Knowledge of plant processes, operations, and safety protocols.
• Relevant experience in power plant operations, or related industries, is advantageous.
• Possession of a 2nd Grade Engineer (Steam) Certificate of Competency or a 1st Grade Engineer (Steam Combustion Engine) Certificate of Competency awarded by the Ministry of Manpower is an advantage.
• Proficiency in Microsoft Word, Microsoft Excel, and Maximo EAM or equivalent software.
• Strong analytical and communication skills, self-motivated, independent, and a team player.
• Willingness to work 12-hour rotating shifts.

Responsibilities:

· To handle order processing and expedite customers’ orders to ensure on-time delivery of goods

· Prepares the necessary paperwork, such as delivery orders, invoices, and other documents for air or sea freight arrangements.

· Liaise with internal departments to expedite the sales order.

· Perform any other admin duties as assigned

· Maintain a good filing system of customers’ history of buying from SLS

Requirements:

· At least GCE “O’ levels or equivalent

· At least 2 years working experience in customer service

· Handle and have shipping knowledge on Malaysia Import and Singapore export is added advantage

· Pleasant personality and customer service oriented

· Able to work independently as well as in a team

· Proficient in MS Excel and Word

· Knowledge on JD Edwards will be an added advantage

Must be willing to work in Tuas

Responsibilities

· Responsible for providing preventive maintenance service for BMS (Building Management System)

· Carry out troubling shooting, analyzing and rectification of the system on time

· Support client with system operation and recommendation for improvement

· Data analyzing and determination of the system operation status

· Response client’s request and attend the issue in short notice

· Supervise subcontractor to carry out the work safely

· Provide the assistance to colleague and mentoring actively

· Ensure all works carried out in accordance with the specified quality and EHS standards

· Prepare and submit quotations, including material, labor, and scope of works

· Perform replacement/repair, fit out works/A&A for existing BMS site

· Perform weekly standby on rotation schedule

· Perform calibration and verification of BMS sensors annually

· Provide sales support BMS service and site survey

Requirements

· Diploma/ Degree from a recognized technical institute

· Hands on experience in BMS Control System

· Hands on experience in programming languages and logic gates

· Familiar with digital fundamental

· Knowledge on basic networking

· Strong customer management & problem solving skills

· Excellent communication & presentation skills

· Skilled in the use of MS office

· Knowledge on ACMV system

Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

Are you a Control System Field Service Engineer looking for an interesting and inspiring opportunity?

Are you passionate about providing complex technical solutions?

Join Our Team

Our Industrial and Energy Technology (IET) operates across 120 countries and serves the entire energy value-chain and industrial sector. We hold an extensive portfolio of rotating equipment, process flow, transmission technology and lifecycle services. Our Engineering Transformation team work to improve the quality of our Engineering processes.

Partner with the best

A Field Service Engineer will play a vital field-based role, travelling to customer sites, both onshore and offshore, across APAC region. You will provide specialist installation and maintenance support. You will perform hands-on work individually and as part of a Field Service team.

As a Field Services Engineer - Control System, you will be responsible for:

• Performing maintenance, modifications, adjustment, commissioning, testing and trouble-shooting on software control system and equipment supporting gas turbines and compressors.
• Acting as primary point of contact and trusted advisor to customers for timely and satisfactory resolution of concerns.
• Interfacing across customers, engineering and management teams to ensure site operations and maintenance activities aligned to technical requirements.
• Collaborating with co-workers and customers to provide technical guidance to solve complex technical problems.
• Providing customers and management with professional and timely report related to field services activities and equipment status.
• Ensuring all in-field activities carried out safely complying with quality, customers' and company HSE standards and procedures.

Fuel your passion

To be successful in this role you will:

• Demonstrate appropriate training, qualifications and experience on either Control Panels.
• Show successful experience in maintenance, troubleshooting and fault-finding of industrial gas turbines, auxiliary systems and/or compressors.
• Have significant experience of troubleshooting, maintenance, start-up and commissioning of pumps and auxiliary packages.
• Display a powerful customer service-orientation mindset, experienced leading customers through tough decisions.
• Have awareness of Health, Safety and Environmental compliance and potential risks.
• Demonstrate excellent written and oral communication skills, to convey technical concepts to customers, both internal and external.
• Enjoy travelling to customer locations, being flexible to customer demands and being available at a short notice.
• Be a motivated self-starter, proactively taking initiative to lead and solve problems with technical and analytical skills.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone.

• In this role, you will travel to and work on customer sites across the Asia-Pacific Region in line with customer requirements. The duration of the work at site and the hours of work at the site will be in line with customer requirements.
• In between work assignments, you will have free time in line with Baker Hughes working time guidelines and fatigue management provisions. You will also accrue annual leave which you can then take to extend your time off.

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

• respond to customer enquiries via phone, email and chat in a timely and professional manner
• provide accurate and complete information to customers regarding products, services and policies
• process orders, returns and exchanges following company policies and procedures
• work with other departments to resolve customer issues and escalations
• keep detailed records of customer interactions and transactions
• collaborate with other team members to meet or exceed customer service targets
• stay updated on industry trends and best practices
• perform other related duties as management requires

Job Description – Service Engineer (Maintenance Lead)

We are looking for a Service Engineer as Maintenance Lead to lead and supervise the maintenance team in maintaining and managing system hardware and networks at customer site located over Singapore island to meet the contractual Service Level Agreement (SLA). The Service Engineer shall report to and under the supervisory of the Maintenance Manager (Reporting Officer (RO)). Hiring shall be 1 year services contract via agent arrangement with option to extend or convert to direct outsource or permanent hiring.

Responsibilities

· Assist the RO in Preventive Maintenance (PM) and Corrective Maintenance (CM) tasks and devise maintenance schedule and resources planning and deployment.

· Provide solution guidance to the Service Technicians and generation of maintenance documentation such as PM & CM report to RO for review and final release to customer.

· Provide CM on faults to establish root cause on an ad-hoc basis including I-level & D-level testing and troubleshooting on equipment

· Plan and perform PM to system equipment at scheduled/ periodic basis including O-level testing and sensors calibration to ensure optimal operational performance

· Collaborate with OEM to establish root cause of fault findings and D-level components repair

· Supervise sub-contractor performing maintenance at site

· Convey updates to RO and customer on maintenance progress.

· Review with RO on maintenance processes and resources etc for maintenance process improvement.

Requirements

· Holding recognised Professional Certificate minimum with Higher Nitec/Diploma/ Degree in Electronics/ Electrical/ Mechanical /Mechatronics/ Aerospace Engineering or equivalent from recognised institution or at least 5-yearsworking experiences in above mentioned engineering fields.

· Advantage if have the knowledge and experience working with sensor, control, automation, and Information Technology (IT) system troubleshooting

· Resourcefulness and logical in problem-solving aptitude.

· Able to travel and work under non-conducive environment including site located at offshore island, buoys and in high security areas such as military base, and airport etc

· Ability to lead and manage a team, and to work independently with minimum supervision.

· Ability to conduct risk assessment and provide advisory to the team member and RO.

· Preferably holding a Class 3 driving license and familiar with Environmental, Health and Safety (EHS).

· Ability to converse well in English language and technically.

Job Description – Service Technician

We are looking for a Service Technician in maintaining and managing system hardware and networks at customer site located over Singapore island to meet the contractual Service Level Agreement (SLA). The Service Technician shall report directly to the Service Engineer/Maintenance Lead (Reporting Officer (RO)) and Maintenance Manager (Approving Officer (AO)). Hiring shall be 1 year services contract via agent arrangement with option to extend or convert to direct outsource or permanent hiring.

Responsibilities

· Assist the RO in providing Preventive Maintenance (PM) and Corrective Maintenance (CM) tasks.

· Provide update and feedback on PM & CM work including maintenance documentation such as PM & CM checklist and status update to RO for maintenance report consolidation and generation to AO for review and final release to customer.

· Attend to and conduct on-site CM to faults reported/raised by customer on an ad-hoc basis including I-level & D-level testing and troubleshooting on equipment.

· Perform on-site PM to system equipment based on planned scheduled including O-level testing and sensors calibration to ensure optimal operational performance.

· Work with OEM on fault findings on-site and off-site including D-level components repair by sub-contractor

· Convey updates to RO on maintenance tasks progress.

· Review with RO and AO on maintenance processes and resources etc. for maintenance improvement.

• Perform any other related duties as assigned by RO/AO.

Requirements

· Holding recognised Professional Certificate such as Nitec/ Higher Nitec/ Diploma in Electronics/ Electrical/ Mechanical /Mechatronics/ Aerospace Engineering or equivalent from recognised institution; or at least 3-years working experiences in above mentioned engineering fields.

· Both local and foreigner as well as fresh graduate would also be considered.

· Advantage if have some knowledge and experience working with sensor, control, automation, and Information Technology (IT) system troubleshooting

· Resourcefulness and logical in problem-solving aptitude.

· Able to travel and work under non-conducive environment including site located at offshore island, buoys and in high security areas such as military base, and airport etc

· Ability to work as a team and occasionally independently.

· Ability to conduct on the job risk assessment and provide advisory to team member, RO and AO.

· Preferably holding a Class 3 driving license and familiar with Environmental, Health and Safety (EHS).

· Self-motivated, self-discipline and a service mindset with commitment and willingness to learn.

· Able to start work immediately or within a short notice is an advantage

• Field service work / Workshop repairs: attend site and perform field work, i.e. breakdowns, preventative maintenance, install and commissioning. Workshop tasks: dismantling, assembly, cleaning of parts and using of precision equipment and machinery and apply safety and health rules and taking into consideration the actual site conditions.
• Planning / Coordination: preparation and control of all material, equipment and documentation needed for site activities and organized them in accordance with contractual and supplement documentation.
• Repair: conducts detailed inventories and inspections to determine necessary maintenance and reports. Troubleshoots and repairs equipment and recommends changes such as new equipment or modified procedures to improve performance and customer satisfaction.
• Reporting: prepares all technical and work reports to be signed by customer representative.
• Customer Regulation: obtaining certain passes or attending classes for commencing of works.

Introduction:

We are looking for dynamic, committed individuals to join our Sales team as Sales Executives to grow our HORECA business.

Job Highlights / Benefits

• Staff lunch provided
• In-house gym
• Staff discount
• Walking distance from Tuas Link MRT

Responsibilities:

• Manage clients’ relations and build contacts with potential clients for new business opportunities.
• Responsible for planning and implementing market penetration strategies and sales targets and for building strong relationships with existing FMCG clients.
• Identify leads and lead new business opportunities to expand distribution channels / networks.
• To exceed or achieve monthly sales targets / new business development served in the assigned area.
• Track, monitor and analyse products, channels and customers sales trends in order to maximise sales opportunities and achieve desired sales results.
• Carry out and plan other sales and marketing functions to increase efficiency.
• Take initiative in implementing best practices to perform duties.

Requirements:

• Diploma in Business / Marketing / Sales
• At least 2 years of relevant experience is preferred
• Proficient in Microsoft Office Suite (Excel, Word, PowerPoint)
• Able to multi-task and work independently
• Strong interpersonal and communication skills
• Self-motivated, hardworking and organized in work

Job Highlights

Immediate Hiring

Free staff meals

In-house gym facility

Short walking distance from Tuas Link MRT

Job Responsibilities

• Prepare sales orders, delivery orders, invoices and other necessary documents
• Attend to customers queries with prompt and professional service
• Ensure timely execution of customers’ orders
• Communicate with customers via various channels.
• Liaise with internal departments and/or third parties to process order requests from customers.
• Maintain good relationships with customers by providing excellent sales support and accurate product information.
• Handle and resolve customers feedback issues.
• Any ad-hoc duties as assigned by Manager.

Job Requirements

• Diploma in any relevant discipline
• At least one year of experience in customer service is preferred
• Customer-oriented with positive attitude and pleasant personality
• Excellent interpersonal, communication, problem solving and phone/email etiquette skills
• Can work independently in a fast-paced environment with minimum supervision

The Field Service Engineer is responsible for carrying out after sales field service jobs including testing & commissioning, servicing, troubleshooting and overhaul of Ingersoll Rand’s air compressor at our installed bases. He/she will require technical knowledge of compressed air systems, customer orientation and strong ownership mindset to be successful in this role.

Responsibilities

• Perform installation, inspection, diagnose, maintenance and rectification on compressed air system at various commercial and industrial establishments.
• Conduct site and classroom training to customers on compressed air system.
• Recommend necessary actions to improve the efficiency and reliability of customer’s compressed air system.
• General service report writing for internal and external customers.
• Document and prepare field service quality reports. If there are quality problems, it is necessary to feedback specific product defects to the production department and assist customers to take corrective measures.
• Provide technical support for the Industrial Technologies & Services (ITS) products, including but not limited to Compressed Air System, Air Dryers System, Air Audit and IIOT system.

Basic Qualifications

• Degree in Mechanical/Electrical Engineering with strong field service experience in compressed air systems and PLC panel programming or related.
• Singapore Class 3 driving license.

Travel & Work Arrangements/Requirements

Office & Site-based within Singapore for field service jobs at installed bases.

Key Competencies

• Customer Orientation
• Ownership
• Independent
• Basic software applications such as Microsoft Office (e.g., Excel, Word, Outlook) and corporate systems (e.g., SAP).

What we Offer

• Equity Grant
• Employee Insurance
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Overtime & Allowances

• 5 Days work
• 8am to 530pm
• Company transport - Pioneer MRT
• AWS + PB

Responsibilities:

• Handle customer’s enquiries via email or phone calls
• Generate quotations and process purchase orders
• Advise customer on products and services related information accurately
• Generate sales from customer’s queries
• Attend to any questions or queries related to company’s product

Requirements:

• Nitec in Business, Engineering, or similar
• Candidate without experience are welcome to apply

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

**Only shortlisted candidate would be notified**

EA Reg. No: R1880058 | Dylan Pang

• Issue accurate invoicing and job production order.
• Building customer relations to deliver optimal sales and aftersales support to our clients. Customer interaction includes online platforms messengers and live chats.
• Managing delivery routes of drivers.
• Ability to effectively work with a team.
• Problem solving skills needed to be able to quickly resolve customer complaints and other issues that may arise from time to time.
• Staying up to date with multiple product knowledge and understanding customer needs across different services and assisting them.
• Possess a fair knowledge on how to use the computer system and its basic application.
• Daily Adhoc tasks to be handled from time to time based on performance and strength.
• Perfer with Food Service experience, specialise in meats industries.
• Training will be provided for applicant without experience.

Job Description:

The successful candidate will be part of AST's Customer Services Division. This customer-facing role encompasses a wide variety of day-to-day tasks aimed at providing an exceptional customer experience to the pilots performing their flight simulator training. Ensure that all customer concerns and requests are attended with high level of professionalism and on timely manner. He/ She need to keep a high level of harmonious relationship with the customer.

Responsibilities

1. Attend to walk-in customers and perform frontline services to any customers / visitors entering the premises. These include:

• Greet visitors and determine the nature of their visit, alert appropriate party of visitor's arrival, direct visitors to proper waiting area.
• Respond to general enquiries and feedback.
• Establish and maintain customer rapport.
• Make outbound calls to customers and/or responding to customer emails.

2. Provide support on training related enquiries includes:

• Work with all stakeholders to ensure proper alignment of the Simulator Flight Scheduling and Maintenance Planning activities.
• Perform Simulator Flight Scheduling and Maintenance Planning activities as an alternate to PIC
• Effectively facilitate pilots’ requests by liaising promptly with other departments.
• Perform data input and analysis.
• Plan and track monthly programs for completion.

3. Assist with tenant-related enquiries including but not limited to booking of meeting/ conference rooms/ guest rooms.

4. Assist with the planning, co-ordination and execution of internal and company events.

5. Setting & tidying up of the guest rooms for accommodation.

6. Monitor Pantry and Stationery supplies and coordinate purchases when needed. Replenish F&B supplies in Pilot Lounge, Boardroom and guest rooms.

7. Other potential engagements in other work areas within the Company.

Requirements

• Possesses at least a Diploma with at least 2 years of relevant experience in customer and/or administrative service.
• Prior working experience in aviation industry/ hospitality / customer service experience is highly advantageous.
• High-quality written and verbal communication skills.
• Competent in administrative procedures.
• Team player and able to work in a fast-paced environment with minimal supervision.
• Must be able to communicate in Mandarin to be able to liaise with Mandarin speaking associates on handling daily operations and headquarter in China.
• Proficient computer skills.
• Only Singaporeans/ SPR may apply.
• Flight attendants and entry level applicants are welcome to apply.

Key Responsibilities include:

· Knowledge and hands on experience in implementing virtualization network

· Working experience for industrial Cyber Security would be a plus

· Configure, maintain and troubleshoot Honeywell Experion hardware and Software

· Implement and Admin EPKS & TPS Domains, controllers (HPM, C200/C300), switches etc.

· Support Honeywell FTE, and Microsoft Technologies

· Support client server architecture

· Perform preventative and corrective maintenance of system hardware/software/networks

· Assist clients with third party vendor communication to our systems

· Administer preventive maintenance on controls systems

· Provide technical support to customers and serve as customer contact for service related issues

· Be able to respond to emergency calls as part of a 24/7 roster service and resolve them within the guidelines that meet or exceed our contract customer expectations and requirements

· Program code logic including system configuration / implementation and troubleshoot existing code. Support Factory Acceptance Testing, Site Acceptance Testing and startup activities including equipment checkout.

· Perform audits and baselines of installed systems to help with migrations and trouble shooting

· Team Player, comfortable with being the lead support person on site.

· The ability to accurately document work performed.

· Knowledge of other systems such as TDC / TPS, PHD, DOC4000, FSC, DVM or others a bonus

· Support / lead projects from preliminary engineering, detail design, startup. Have capability to lead others to accomplish all project goals and objectives.

· Knowledge and experience with process instrumentation would be beneficial

· Must be able to take ownership and responsibility for work and actions

Basic Qualifications:

· Bachelor’s degree in with Chemical Engineering / Automation Control

· Minimum of 5 years’ field experience

· Preferable with working experience in Experion (TPS, PHD, FSC an advantage)

· Be comfortable leading system migrations between releases.

· Work independently on life system

· Certificate on Virtualization would be a plus

· Demonstrated effective oral and written communication and interpersonal skills.

Confirm all shipment information with origin to initiate shipment

Receive and validate customers order including shipping documents, SLI, EIN, credit application

Review/update; verify fees, customer profile, SOP, and rates per quote or customer SOP/work instructions

Verify shipment status, review pre-alert and verify shipment handling instructions to operations

Serve as a liaison between Document Processing Agent and the Customer regarding shipment details and/or exception

Communicate and resolve problems that arise in the movement of product

Communicate exceptions and shipment status with Customer

SERVICE SALES

· Identify and develop potential business opportunities;

· Responsible for maintaining an existing customer base, create new customer accounts and business development;

· Achieve sales & profit targets set by the company;

· Cultivate and enhance long term relationship with new and existing customers;

· To process quotation on recommended parts to customers within 1 day upon receipt of reports through eSOS;

· To generate an invoice for billing to customers within 1 day upon completion of the job through eSOS;

· Ensure immediate response to Customers and close follow-ups with Customers via email, phone call, text messaging and faxes;

· Ensuring customers’ requirements are clearly and adequately defined before handing over to the project and operation team;

· Schedule and coordinate with customers on Load Test (LT) / Visual Inspections (VI);

· Ensure all Customers crane details are updated to eSOS accurately;

· Ensure on sending mass emails to customers on new/revised service rates;

· Gather Customers’ feedback and develop corrective measures for Management reviews;

· Responsible for providing a high standard of customer service

· To generate weekly reports to update management on the progress of all enquiries and order confirmation to both internal and external customers

· Conduct weekly meeting with inter-related depts. such as Sales, Parts Executive, Finance, Store, Purchasing possible for providing a high standard of Customer Service;

· Ensure timely billing for service job completed within 3 working days through ESOS to customers;

SERVICE OPS.

· Responsible for updates of daily Technician Schedules, including breakdown calls, maintenance, load tests, visual inspection, etc to ESOS.

· To conduct morning briefing with Technicians on ensuring their awareness of the job schedule for the day itself;

· To organise weekly operations meetings with Technicians;

· Work closely with Supervisor on assigning right team for jobs;

· Ensure timely deliveries, right quality and quantity of parts to Customers;

· To ensure electrical jobs under projects are completed on time by Technicians;

· Responsible for maintenance of Equipment List and update of all relevant parts details on regular basis;

· To ensure Technicians are always in proper and clean overalls;

· To check on proper housekeeping at the Service Area, Electrical room, truck cleanliness;

· To ensure tools in toolboxes, tools in tool bags, full PPE of technicians, stocks in trucks are checked on a weekly basis;

OTHERS

· Ensure procedures, standards and guidelines are followed and maintained;

· Ensure all documentation of records are up to date and filed accordingly;

· Any other duties assigned by the Management from time to time.

all hair services like cut, dying hair, doing hair treatments, selling hair products, order stocks for hair products, cashiering, handle calls from customers, train and manage Staffs, help to boost sales, handle complaints from customers. help to wash towels and fold them, open and close the cashier.Interested may contact me at 83805668