Company

At CoNEX Healthcare, you can begin a life-long career of exploration and innovation, while helping to champion healthcare innovations for all, particularly in patient safety, nursing productivity and independent ageing. You'll thrive in a closely-knit and driven multidisciplinary team with purpose, breaking down barriers to innovation in a purposeful and productive healthcare ecosystem.

Learn more about CoNEX Healthcare here: www.presage.health

Job Description

The software support engineer is responsible for providing technical support with the Pre-deployment setup and post-deployment support from end-users in Hospitals, Nursing homes or other healthcare institutions.

• Assist with Pre-Deployment setup; preparation of device software after hardware assembly.
• Perform Software Updates to operational devices whenever needed.
• Perform diagnosis, and troubleshooting of technical issues.
• Provide Technical support (L1/L2) to users. There will be occasional need to respond to system issues beyond working hours on a 24/7 basis

Job Requirements

• Experience with working in Linux OS environment.
• Knowledge in working with Edge devices and peripherals (e.g: Bluetooth, Wi-Fi technology, Device Networking, etc.)
• Programming skills preferred (Bash scripting, Python, C++).
• Good communication skills and experience in working with end users on providing technical support.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

This project aims to investigate the performance of cementitious materials and 3D printed concrete against ballistic impact. The researcher will be required to cast and fabricate the various cementitious materials and 3D printed concrete, prepare the logistics and perform the relevant ballistics tests.

Job Requirements

The research fellow should have at least 3 years relevant experience in the following two areas:
• 3D concrete printing;
• Conducting laboratory ballistic tests.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Responsibilities:

Project Design and Development:

• Lead the design process for civil/structural engineering aspects of deep excavation projects.
• Develop detailed geotechnical design plans, ensuring compliance with relevant codes and regulations.
• Conduct engineering analyses, including stability assessments and structural integrity evaluations.

Technical Leadership:

• Provide technical guidance and mentorship to junior engineers and design teams.
• Review and approve design calculations, drawings, and specifications.
• Troubleshoot and resolve complex design and construction issues.

Stakeholder Collaboration:

• Collaborate with multidisciplinary teams, including architects, contractors, and project managers.
• Liaise with clients, regulatory authorities, and other stakeholders to ensure project requirements and standards are met.

Quality Assurance and Compliance:

• Ensure that designs meet local regulations, safety standards, and best practices.
• Participate in audits, inspections, and peer reviews of design work.

Project Management:

• Manage timelines, budgets, and resources for design deliverables.
• Support the preparation of technical reports and documentation.

Job Requirements:

• Bachelor’s or Master’s degree in Civil/Structural Engineering or a related discipline.
• Recognized professional engineering qualifications by the Professional Engineers Board of Singapore.
• A minimum of 10 years of relevant experience in civil/structural engineering, with at least 5 years focused on designing geotechnical works for deep excavation projects.
• Proven expertise in handling projects of a similar size and complexity.
• Strong knowledge of geotechnical design principles, soil mechanics, and structural analysis.
• Proficiency in relevant design software and tools (e.g., Plaxis, AutoCAD, STAAD.Pro).
• Excellent communication, leadership, and problem-solving skills.

Preferred Qualifications:

• Chartership or equivalent professional accreditation (e.g., PE, CEng).
• Familiarity with Singapore’s construction and regulatory environment.
• Experience with risk assessment and mitigation for geotechnical designs.

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering centre serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

As a Software Engineer in the Thales Embedded Product Development Team, you will participate in the design, implementation, validation and deployment of embedded applications products to the major OEM smartphone customers.

Responsibilities:

• Develop, validate and deploy new software components (for example advance software security mechanism and next generation IoT connectivity protocols) for embedded operating systems targeted for mobile and IoT devices, in applications such as mobile payment, digital identity and IoT connectivity
• Participate to the development of next generation operating systems for future devices
• Being in agile development environment to work closely within team and multiple teams around the world to build great products exceeding customer expectations
• Contribute to continuous product and development methodology improvement

Requirements:

• Proficient in C/Java programming languages
• Degree in Electrical/Electronics/Computer Engineering or related fields
• Team player with good communication and collaborative skills, ability to work independently and proactively.
• Knowledge of embedded technology/ecosystem, software security or Javacard will be a plus
• Prior experience as software engineer will be a plus

Other information:

• Working Location: One North
• Working Hours: Monday - Friday, 9am - 6pm

Job Description & Requirements

Job Responsibilities:

• Report to Project Manager (PM)
• Attend all meetings as and when required by PM
• Compile and prepare daily report for client
• Prepare weekly work schedule
• Prepare monthly report (including progress photos)
• Prepare method statements for works, and review all method statement submitted
• Prepare submissions of method statements, drawings and risk assessment for client to review
• Resolve technical problems at site by liaising with in-house Engineering Team or PE directly
• Record and prepare minutes of meeting
• Handle technical and engineering problems
• Overseeing project quality plans
• Coordinating with production and site team
• Review subcontractors/supplier performance after completion works
• Other duties assigned by the management

Job Requirements:

• Degree or Postgraduate in Civil/Structural/ Mechanical Engineering
• 4 year of practical experience as an Engineer cum Supervisor or in similar capacity
• Experience with track records in local steel structure projects would be an advantage

Developer/Senior Developer (Full Stack)

Shaping Singapore’s digital future, we at the Infocomm Media Development Authority (IMDA) often tackle head-on challenges that come with developing and deploying emerging, frontier technologies across various sectors. We Dream, Design and Deliver in the technology and media space, leading Singapore into a limitless digital future.

Join us in playing an exciting role in building Singapore’s digital metropolis.

If you have what it takes to build Singapore’s digital future with us, we are looking for a Full Stack Developer for the role in SGTraDex Technologies Pte Ltd, wholly owned subsidiary of IMDA.

What the role is:

SGTraDex Technologies Pte Ltd is a company incorporated to design, own and operate SGTraDex, a trusted and secured data exchange highway.

You will be part of the Engineering Team and will be working on enterprise level applications to build web applications that facilitates data exchanges across multiple systems.

What you will be working on:

• Drive the development team in building reusable and extensible services

• Advocate and practice agile principles in software development

• Design and build services with a focus on business value and usability

• Design systems with scalability and flexibility in mind

• Embrace and ensure “lean operations” for all system

• Contribute in technical discussion or solutioning session

• Perform code reviews and encourage best practices

• Maintain user guides and technical documentations

What we are looking for

• Experience with Cloud hosting or PaaS such as AWS, Azure, Google Cloud, Heroku, Firebase, etc

• Write high quality and maintainable code on open-source (Linux based) web platforms and frameworks (Example: NodeJS, Angular, ReactJS, Go, etc.)

• Experience with both frontend and backend development from development to operation

• Experience with micro-service architecture

• Experience with at least 1 SQL and NoSQL database

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines

• Excellent written and communication and skills

• Work in a cross-functional service team consisting of software engineers, DevOps, and other specialists

For senior developers:

• Own end-to-end design and implementation for complex systems

• Provide technical leadership within the team

• Mentor junior engineers

• Review and approve code

• Take ownership of the project documentation

• Perform the Scrum master role (scrum master certification is a plus)

This position will commensurate with experience

Only shortlisted applicants will be notified

Responsibilities

• Attend to all customer calls.
• Performing thorough equipment inspections, calibration, adjustment & test/repair of equipment
• Scheduling appointments for test equipment due for calibration
• Ensuring laboratory equipment is calibrated as per specifications and standards
• Addressing and troubleshooting any test equipment failures and repairing of test equipment
• Maintaining and updating a record of all documentations of the calibration process
• Administering and monitoring effectiveness of calibration procedures
• Ensuring completion of tasks as per assigned deadlines.

Requirements

• Minimum Education Level: NITEC/ Diploma in Electrical/Electronic Engineering or its equivalent
• Minimum 3 years proven work experience as a calibration technician or similar role
• Knowledge in ISO 7025 standard will be an advantage
• Strong analytical and troubleshooting skills
• Hardworking, meticulous, team player and able to work independently
• Proficency in Microsoft Office is essential

• Co-ordinate, program and monitor site work, material and workforce
• Attend site meeting and resolve technical issue with main contractor or consultant
• Implementation of Cost, Quality, Productivity, Safety and Health control on site
• Ensure procedures, standards and guidelines are followed and maintained
• Able to produce working and As-built drawing including O&M manual

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

• Recipe creation and optimisation for new R&D applications requirement.
• Preventive and corrective maintenance planning cum execution and vendor management.
• To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up
• Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).
• To set-up appropriate process and product control plan and out of control action plans (OCAP)
• Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirements:

• Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering
• Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)
• Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)
• Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

We need you to work along-side the Cloud Apps team, supporting our UI wielding petabytes of streaming data into visualizations and metrics of both real and simulated scenarios, aiding: management; debugging; and real-time monitoring of our Autonomous Vehicles (AVs).

You’ll be connecting the work of many disparate, international teams - ensuring their “day-to-day” goes by uninterrupted. You’ll be writing, and testing, in: React; TypeScript; and Vue.js in order to take stakeholder concepts from vague ideation, to the creation of great, responsive UIs with intuitive visualizations. This work will encompass every step of the journey of our AV fleets… from registration and software updates, to calibration, testing, and finally getting users into commercial rides.

What we want you to do

• Design, build, document, test, and maintain the AV fleets’ monitoring and data visualization platforms
• Monitor, support, and resolve issues as they arise in production
• Assist with high-level analysis, system design, and code reviews
• Communicate with stakeholders and team leads to identify system requirements

What we hope you’ll have

• 5+ years of working professionally delivering complex, high-performance web applications with modern JavaScript tooling
• A good eye for UI, UX, and responsive design
• Comfort taking projects from ideation through to completion, with strong communication and collaboration across multiple international teams
• 3D visualization tools (WebGL, Deck.gl/three.js, Mapbox)

Bonus points for experience with

• Working in a globally distributed team
• React, Vue.js, and TypeScript
• Data visualization (Plotly, D3); video manipulation; WebSockets
• Serverless APIs tools such as: AWS; Docker; Terraform
• Python and/or Golang

We are looking for a Systems Engineer to support the institute’s IT infrastructure and operations. The candidate will provide level 2 and level 3 support for IT services, assist with new setups, as well as review and implementation security and compliance measures.

Requirements:

• Minimum Diploma or Bachelor’s degree in computer-related studies
• At least 3 years of relevant work experience
• Strong knowledge in servers and hardware technology
• Experience with open-source software packages and IT infrastructure services
• Good understanding of best practices and cybersecurity concepts
• Experience or strong knowledge in Linux system administration, scripting, storage, and security
• Experience with Virtualization and Containerization
• Knowledge in networking, firewalls, and routing
• Good interpersonal and communication skills
• Ability to work independently and as part of a team

Good to Have

• Familiarity with local scientific research environment.
• Experience with computational clusters (e.g., SLURM).
• Familiarity with Linux-based scientific tools and software.
• Experience with automation tools like Ansible or similar.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 32 months
• Start from: March 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 4 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

About US

UTEC was first established in Singapore on 9 December 2014 and we specializes in civil and tunnel infrastructure construction works, with projects based locally and throughout Asia Pacific. The Company draws on the skills and expertise of its people to deliver tailored underground engineering solutions, striving to provide the best engineering solution and economics to its client. Since its establishment as a Contractor in underground works, the Company has been involved in projects not only in Singapore, but as far as India as well.

OUR VISION

Providing innovative, cost effective & sustainable solutions to underground works, bringing the best engineering solutions to our clients and all the stakeholders.

About This Role

1. Carry out land and engineering surveys required for the construction.

2. Lead the execution of topographic and as-built surveys to capture essential data.

3. Check and compute the pre-computation prior to any setting out for field surveyors and verify the accuracy of survey data, measurement and calculations.

4. Propose engineering documents for clients' approval, on-site installation and hands-on monitoring of sensors, instruments and equipments.

5. Attending project meetings, schedule control, monitor site personnel ensuring data processing, review, analysis, submission of reports.

Skills Required

1. Well verse in surveying technology and equipment.

2. Proven track record in land surveying.

3. Understand geotechnical instrumentation.

4. Proficient in Microsoft Office and AutoCAD.

*May required to work OT when necessary.

*This role is on 5.5 days workweek and work location is currently located at the central.

*More details of the role, company and benefit will be shared during the interview for shortlisted candidate.

These are our Featured Projects that we are Proud to show you:

SINGAPORE

1) PUB – Deep Tunnel Sewage System Contract T-11,

2) LTA – Thomson Line T206

OVERSEAS

1) INDIA - Mumbai Metro Line 3 – UGC07

2) MALAYSIA - Prasarana Malaysia Bhd – LRT3

3) HONG KONG - CEDD – Kai Tak Development Stage 3B

AND MORE ARE ONGOING AND COMING!

Key Responsibilities

Provide guidance and technical assistance to sales and service teams.

Offer customized solutions for technical issues and sales inquiries.

Assist the service team with equipment repair and maintenance.

Develop procedures for equipment testing, maintenance, and operation.

Coordinate in-house product assembly and validation testing and produce test reports.

Conduct technical presentations and product training for clients.

Create and maintain drawings, bills of materials, and design documentation.

Discuss technical requirements with clients on-site and coordinate site work.

Prepare method statements and reports for site work.

Any other ad-hoc duties as assigned.

What you will do:

The Systems Applications Engineer, National Accounts will Provides sales support to the engineering and sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Oversee the application engineering team, providing configuration, enhancement, and support for technical documentation and presentations to clients.
• Customize and introduce new features to Metasys software and in-house developed applications based on end-user requirements.
• Design and construct new applications tailored to meet customer specifications and needs.
• Guide application engineers in writing and executing tests on complex programming, troubleshooting issues as they arise, and supporting product launches.
• Provide technical support and troubleshoot application issues while performing tests on complex programming and assisting in product launches.
• Assist the application manager in process improvements to enhance productivity and efficiency.
• Collaborate with system integrators (SI) to monitor their performance with quality assurance/quality control checks and ensure completion sign-off.
• Manage vendor relationships, including scoping application services and reviewing deliverables.
• Collaborate as part of a design, engineering, and operations team.
• Knowledge of ACMV and controls associated with Johnson Controls Metasys will be advantageous.
• Deliver customer support by responding to technical queries with detailed analyses of building management systems, tooling costs, and design/process improvements to meet all customer needs.
• Collaborate with engineering, sales, and operations teams to understand standard fabrication techniques, composite materials, and customer demands to develop design details.
• Create and present technical engineering information based on customer proposals, including 3D representations of products and tooling.
• Prepare cost estimates by analyzing blueprints, customer documents, and consulting with engineers and technical personnel.
• Conduct conceptual designs of composite components and assemblies to support proposals.
• Generate accurate CAD models of components and assemblies.
• Develop detailed bills of materials for proposals.

What we look for:

• Bachelor's Degree in Engineering with a minimum of 5 years of relevant experience in Access, Intrusion, and Video Management systems
• Demonstrate strong verbal and written communication skills, including the ability to efficiently articulate technical subject matter
• Good communication skills, with an ability to express and understand complex technical concepts.
• Experience of working with globally distributed teams & matrixed environment

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

ABOUT SIOUX

Sioux is a strategic high-tech solutions provider that develops, innovates and assembles complex high-tech systems

We have a team of over 1,200 dedicated engineers who either support our clients or serve as their Research and Development department. Our strong productivity allows us to speed up product development, giving our clients a competitive edge at a better cost-effectiveness.

As a rapidly growing employer, Sioux values its employees' growth and well-being. We invest in their career development and foster a positive work environment that promotes personal and professional growth.

SIOUX IN SINGAPORE

Sioux Singapore plays a pivotal role in the Asian market by offering R&D services from our centers across Europe and Asia to customers, leading development teams in Asia, from Singapore

This expansion allows us to meet the changing needs of our domestic and international (OEM) customers in the semiconductor, analytical, and medical industries.

The Role

Your role will involve developing equipment control software to support customers in the mentioned domains. Your responsibilities include:

• Collaborating with architects to define product architecture in your domain.
• Analyze customer needs in software requirement engineering
• Analyzing, designing, implementing, and test the control software.
• Conducting peer reviews to ensure product quality.
• Leading the small development team and ensuring team performance.
• Working as an integral part of a scrum team and handling user stories across the full stack.
• Developing functionality using Agile practices, emphasizing speed and quality.
• Leadership roles for higher positions.

The Job Scope

Develop testable quality code in Python for following machine control functionalities:

• Qt Python UI development
• Machine Control and Sequencing
• System calibration and validation
• Data Processing and analytics and visualization
• Lead a small team

Job requirements

QUALIFICATIONS AND EXPERIENCE

• A technical background with a higher professional or university education.
• Strong background in the semiconductor, analytical, or medical equipment domain.
• Experience in developing equipment control applications, including working with PC-based control, embedded controller, or motion controller
• A minimum of 4 years of experience in Python full stack programming
• Additionally, Technical Lead / Designer role requires minimum 4 years in object-oriented analysis and design with common design patterns
• Additionally, Technical role requires min 4 years leading Scrum development teams with requirement engineering, Sprints managements and technical design reviews

DESIRABLE SKILLSET

• Able to handle complex software solution
• Experience with Qt for Python
• Experience with Python libraries such as NumPy, SciPy
• Experience with Python chart capabilities such as matplotlib
• Worked with Agile Scrum and Kanban team
• Worked with git workflow with online repositories like Gitlab, GitHub, Bitbucket etc
• Worked with git tools like SourceTree, TortoiseGit, GitKraken, Fork etc
• Worked with Continuous Integration tools

DESIRABLE SOFT SKILL

• A preference for autonomy and responsibility in organizing your work.
• Good communication skills and ability to work effectively within a geographically distributed team.
• For Senior positions, good leadership skills to lead a small team of 2-5 developers.

WHAT WE CAN OFFER

You will work within a pleasant working environment, in which High-Tech, High-Fun & High-Value are central.

• Competitive Compensation: Attractive salary, 13-month salary and performance bonus
• Hybrid Work Arrangement: Flexible working environment with 3 days in the office and 2 days of remote work per week, and flexible working hours.
• Comprehensive Healthcare: Inclusive healthcare coverage and annual health screening.
• Work-life balance with generous Leave: Up to 20 annual leave days and 10 company sick leave days without requiring a medical certificate.
• Education Budget: SGD 5,000 per year for training courses aimed at career development. We are committed to investing in your growth and development.

JOB DESCRIPTION

· Perform research in the following areas:

o Global performance analysis, and/or global structural response analysis

· Assist in conducting physical model tests, field experiments and numerical simulations to support the development of integrated physical-numerical modelling and simulations.

· Collaborate with industry partners, affiliated research institutes and other relevant stakeholders to contribute to grant proposals for research funding consistent with the strategic goals of TCOMS.

· Any other duties as assigned by supervisor.

JOB REQUIREMENTS

· Min Bachelor?s/Master?s Degree from reputable universities in Civil Engineering, Mechanical Engineering, Marine Engineering, Naval Architecture, Applied Mathematics or other related disciplines.

· Preferably having relevant research/industry experience with competent knowledge in some of the following areas:

o Offshore engineering, marine engineering, hydrodynamics, naval architecture and ocean engineering.

· Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

o CAD software such as SolidWorks, Rhino, AutoCAD

o Engineering tools such as WAMIT, SESAM and OrcaFlex

o Finite Element analysis tools such as SESAM, ABAQUS, Ansys

o Programming codes such as FORTRAN, Python, MATLAB, C++ or equivalent.

· Good interpersonal and communications skills.

· Ability to adapt and work effectively as members of a team.

· Good command of written and spoken language.

· Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Descriptions:

Using levitation, we aim to isolate and control physical systems with unprecedented precision. The rapidly evolving field of levitodynamics explores how such systems can be used as quantum sensors and for testing fundamental physics. Most current levitated systems are limited to small masses (nano/microgram) and rely on incoherent optical interactions, which scatter rather than reflect light.

By leveraging platforms such as diamagnetic, superconducting, and optical levitation, we aim to create ultra-precise quantum sensors and explore profound questions in physics, including quantum collapse mechanisms and quantum gravity.

The successful candidate will contribute to activities such as:

· Modeling the dynamics of levitated systems.

· Learning to operate advanced cryogenic systems.

· Designing, constructing, and characterizing optical systems.

· Exploring novel techniques to exceed the standard quantum limit using correlated spin systems.

Key Responsibilities:

· Modeling: simulate the dynamics of magnetically and optically levitated systems.

· Fabrication: Develop advanced materials and components for levitation systems.

· System Design: Build and test optical systems and feedback-control mechanisms.

· Research & Innovation: Investigate groundbreaking applications in quantum sensing and fundamental physics.

Job Requirements:

· Bachelor/Master degree in Physics, Applied Physics, Precision Instrumentation, or related fields.

· At least 5 years of relevant experience

· Strong motivation for multidisciplinary research in quantum technologies and fundamental physics.

· Experience in one or more of the following is highly preferred:

Superconductivity

Quantum sensing

Cryogenic systems

Feedback-control systems

Optical systems design

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC
• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.
• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.
• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.
• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.
• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.
• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status
• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.
• Shall be capable of developing work instructions for users of AVEVA NET.
• Must understand company goals and implement management directives and policies.
• Anticipate potential problems and take preventive actions.
• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.
• Shall train the MODEC users on the AVEVA NET application in projects.
• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when
• Contribute to continuous improvement of company work methodology/procedures.
• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

Training in AVEVA NET administration

Relevant Experience:

a) 5 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

Ob behalf of our client who is an Original Equipment Maker (OEM), we are looking for a suitable candidate to join them as Senior Sales & Marketing Executive.

Responsibilities

- Achieve sales objectives within product range or assigned districts.

- Pursue sales leads, conclude orders, and initiate internal sales process and logistics.

- Provide technical solutions to Consultants prior to tender calling

- Understanding of local Codes (COP) for Equipment systems

- Attend tender interviews

- For secured contracts, to attend project meetings as and when required

- Handle variation orders

- Manage account receivables

- Visits to customers

Requirements

- Minimum diploma in Electrical/Mechanical/Mechatronics Engineering

- Proven sales record and handle of tender sales

- Good customer relationship management

- Applicants must be based in Singapore currently

Benefits

- Permanent placement

- Career progression

- Sizable organisation in the evergreen industry

Location: East

EA License: 22C0971 | EA Registration: R21101298

Position Overview:

We are seeking a Voice Engineer with expertise in Verint or Workforce Optimization (WFO) systems under the Avaya platform. The selected candidate will play a crucial role in providing Level 1 to 3 support to our banking client, ensuring the seamless operation and optimal performance of their voice systems.

Key Responsibilities:

• Provide expert-level support for Verint or WFO systems deployed within an Avaya environment.
• Troubleshoot and resolve complex technical issues related to voice systems, including call recording, quality monitoring, and workforce management.
• Collaborate with internal teams and external vendors to address system integrations, upgrades, and enhancements.
• Conduct proactive monitoring and performance tuning to maintain system stability and efficiency.
• Participate in the planning, implementation, and testing of system upgrades and migrations.
• Document technical procedures, configurations, and troubleshooting steps for knowledge sharing and training purposes.
• Serve as a subject matter expert and mentor for junior team members.

Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or related field.
• Minimum 2 years of experience working with Verint or WFO systems in an Avaya environment.
• Proficiency in Avaya Aura Communication Manager and Avaya Application Enablement Services.
• Strong understanding of SIP, VoIP, and telephony protocols.
• Experience with SQL databases and SQL query language.
• Excellent analytical and problem-solving skills.
• Strong communication and interpersonal abilities.

Preferred Qualifications:

• Avaya certifications (e.g., ACSS, ACIS) or Verint certifications.
• Experience working in a banking or financial services environment.
• Knowledge of regulatory compliance requirements related to call recording and voice systems (e.g., PCI DSS, GDPR).