Job responsibilities:

• Report to, and provide support to the Lead/ Senior Instrumentation Engineer on assigned projects and report to the Head - Instrumentation Engineering at the basis level.
• Be familiar with and implement Company work processes, procedures and quality policy as appropriate on assigned areas of projects.
• Be aware of Company contractual requirements and Scope Boundaries
• Responsible for work assigned by the Lead / Senior Engineers through project lifecycle phases and for compliance to project specific performance, integrity, quality and HSE requirements relevant to his/ her assigned scope of work. Specific duties could include:
• Prepare requisitions, specifications and datasheets as assigned.
• Evaluate vendor offers and prepare Technical Bid Evaluation Report for assigned packages.
• Populate Instrument database such as SPI/Aveva Instrumentation.
• Prepare and Issue documents such as Instrument Index, Hazardous Are registers etc
• Provide inputs to designers to develop design/drafting deliverables such as cable block diagrams, wiring diagrams, Layouts and review these deliverables
• Assist in preparation of control system deliverables such as I/O lists, Control narratives, Cause and Effect Matrix etc.
• Review and provide technical inputs on Instrumentation Engineering related technical matters to interfacing disciplines
• Review and provide technical inputs to equipment/ package related technical matters
• Be responsible for and manage the Instrumentation Engineering technical interfaces with equipment and package suppliers, in coordination with the Lead/ Senior Instrumentation Engineer, for assigned areas to ensure that the equipment and packages comply with the technical requirements & specifications of and to monitor the compliance to Client’s Basis of Design, Standards & Project Specifications.
• Continuously seek to improve discipline working methods, tools and procedures and contribute actively to “Discipline Development” and “Experience Transfer”.

Work experience requirements:

• Minimum of 3 years of work experience in instrumentation engineering activities such as preparation of data sheets, specifications, Technical Bid Evaluation reports etc in a reputed engineering consultancy.
• Applicants with less than 5 years of relevant Instrumentation Engineering experience may be considered for junior positions.

Qualifications:

• Bachelor’s Degree in Instrumentation/Electrical/Chemical Engineering with relevant work experience as per above.

Other skills:

• A self-starter who can work independently, make sound decisions, analyse problems and provide focused solutions.
• Good understanding and knowledge of oil and natural gas industry standards such as, but not limited to, API (American Petroleum Institute), ISO (International Organisation for Standardisation),IEC, NORSOK, EU Directives ATEx, IECex requirements and other relevant standards related to Instrumentation Engineering.
• Effective verbal and written communication skills in English
• Experience in engineering of Oil and Gas offshore projects would be an advantage.
• Experience in SPI/Aveva Instrumentation would be an advantage.
• Applicant shall have strong computer literacy in commonly used business software applications such MS Word, MS excel, Teams etc.
  
  We regret that only shortlisted candidates will be notified.

Job Description:
We are seeking a skilled Data Engineer with expertise in AWS cloud computing and database administration to join our team. In this role, you will design, implement, and manage scalable data solutions while maintaining and optimizing databases to ensure high performance and reliability..

Job Responsibilities:

• Design, deploy, maintain, and optimize database systems (Oracle, MySQL, SQL Server), including installation, configuration, backup, and recovery.
• Monitor and optimize database performance to improve response time, stability, and reliability.
• Plan and expand database capacity to ensure scalability and meet business requirements.
• Deploy and manage cloud infrastructure on AWS, including servers, networks, storage, and other resources, to provide a stable and reliable environment.
• Create, configure, and maintain AWS services to align with business needs, selecting appropriate services based on requirements.
• Implement and manage monitoring tools to track the performance and operational status of databases and AWS environments, proactively identifying and resolving potential issues.
• Collaborate with cross-functional teams to deliver efficient, scalable, and reliable cloud and database solutions.

Job Requirements:

• Bachelor’s degree or higher in Computer Science, Information Systems, or related fields.
• Minimum of 3+ years of experience in database administration (with hands-on experience in Oracle, MySQL, or SQL Server).
• Strong experience with AWS services and managing cloud infrastructure.
• In-depth knowledge of database performance tuning, troubleshooting, and optimization techniques.
• Familiarity with cloud networking concepts and using monitoring tools for AWS environments.
• Strong communication and problem-solving skills to handle technical challenges effectively.

Responsibility

• Responsible for high-performance block implementation (RTL to GDSII).
• Perform block level floor planning, power grid implementation, APR placement, timing optimization, CTS and routing.
• Close the design to meet timing, power budget and area targets.
• Run physical verification flows (DRC/LVS/EM/IR), and implement fixes to meet the requirements.
• Implement ECO’s to address functional bugs, timing and physical verification violations.
• Responsible for the generation and maintenance of block-level STA constraints and performing STA signoff checks.
• Responsible for timing model generation and supporting the successful integration of blocks into SOC.

Qualification

• At least 3 years of hands-on experience in digital-physical design.
• Bachelor/Master’s degree in Electrical Engineering with an emphasis in IC design
• Experience with digital Physical design and Static Timing Analysis
• Experience in floor planning and routing.
• Experience in advanced process nodes (5nm).
• Good experience with Synopsys implementation tools (DC, ICC2), and experience with Cadence (Innovus) implementation tool is a plus.
• Experience in Mentor Verification tool, Calibre.
• Proficient in TCL coding, Perl/Python knowledge is a plus.
• Good written and communication skills.

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

About the role:

Our engineering teams build scalable and operable platforms serving eCommerce traffic around the world and deliver world-class product experience. You will join a diverse and talented team of engineers from many different countries with great ambitions to impact the eCommerce landscape. We are seeking team members who strive to solve the hard problems, take pride in delivering world-class products, and are strong team players. You are someone who is resilient, self driven and highly motivated. You want to see the impact of your work making a difference every day. You find passion in the craft and are constantly seeking improvement and better ways to solve tough problems.

Your Adventure Ahead

• You have consistently led and delivered large scale projects.
• Contribute to the ideation, technical design, implementation, and testing of product features
• Produce high quality software following good architecture and design principles that are scalable
• Design & deliver thoughtfully crafted clean APIs to drive the interactions between our client applications and backend services
• Collaborate with product, data and design to define the future of the ShopBack experience
• Comfortably lead and mentor other software engineers.
• Encourages others to follow engineering best practices.
• Analyze requirements well, come up with solutions, and explain trade-offs.

Essentials to Succeed

• 3 to 6 years of experience developing consumer facing web applications
• Proven experience designing complex distributed systems, management products or business applications
• Hands-on experience working with NodeJS (Preferred)
• Experience building and deploying applications and services into cloud environments (AWS highly desired)
• Strong experience leading design and implementation of robust and highly scalable web services
• Ability to work effectively in a fast paced, complex technical environment with high adaptability and flexibility

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable, and easy to use to empower athletes at all skill levels to analyze and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.

We are innovative, focused, and rapidly growing. We are continuously looking for very driven team players who will stop at nothing to deliver state-of-the-art solutions as part of Team Rapsodo.

Job Description:

Our algorithm team designs, develops and implements state of the art computer vision solutions to address needs of complex Rapsodo products. As a Computer Vision Engineer, you will be part of a world-class, skilled engineering team developing state of the art measurement solutions which help athletes reach their full potential. This role requires a highly versatile skill set and you will have opportunities to contribute in all relevant domains. Your responsibilities will include the development of new products and enhancing existing products.

Requirements:

• Masters or PhD in Computer Science or related fields with specialization in Computer Vision, and Image Processing
• Minimum 2-5 years of relevant working experience
• Strong knowledge and hands-on experience in 3D Vision, Camera Calibration, Image Classification, Segmentation and Feature Extraction
• Strong knowledge in Linear Algebra, Numerical Optimization, Probability and Statistics
• Hands-on experience with OpenCV
• Excellent C/C++ programming skills with some Python experience
• Experience with software architecture and/or API design, complemented by robust integration skills
• The ability to communicate technical information clearly and succinctly to both technical and non-technical team members

UnaBiz is the leading IOT company in Singapore. HQ in Singapore, with office in Taiwan, Japan, France, Spain and providing IOT solution globally.

Join the company that supplies solutions to established local / MNC like SIA, CBRE, JLL, Shiseido, TotalEnergies, Certis, Engie, and many more!

Responsibilities:

- Project Management of IOT/sensor deployments

- On site visits & surveys before project confirmation

- Coordinate and manages technicians and vendors

- Coordinates procurement with purchasing dept

- Experience in green building (e.g. energy monitoring) deployments

- Keep track of project progress & updates stakeholders

- Propose/validate solutions

Requirements:

- Technical/engineering background and/or experience in Facilities Management / Green Building / Sustainability / Eletronics

- Min 2 years of relevant experience

- Multitasks well

- Proficient in MS Excel, MS Word

- Strong interest in new exciting world of IOT

Benefits

1. Rewarding career at the leading IOT company in Singapore

2. Excellent compensation commensurate with experience and skill

3. Activities to build company culture of camaderie

4. Free transportation to/fro office and home

5. Free lunch in office

6. 5 working days per week

Excellent execution on assembly process for 1st NPI success and smooth transfer process from NPI to HVM

• Excellent execution of the qualification of NPI products / packages build that proliferate from the pilot products and packages according to planned timeline
• Full responsible on support NPI business process with process TRA, POS, PFMEA/QCP, risk mitigation and documentations.
• Deliver BIC yield and cost on product NPI with integration of DFx BIC package solution, process guideline and design rules.
• Collaboration with multi-functional team from NPI to LVM/HVM process transfer.
• On-time execution of NPI Customer samples and Engineering Samples build for new products and package

SME Process Owner Responsible for Continuous Improvement on Process Yield, Defect Elimination and Process Characterization

• Process owner to perform on-time detection with data analysis for process yield improvement. Lead the defect elimination and continue improvement action, with problem solving methodology, statistical analysis and integration solution decision.
• Process owner to develop process recipe for BIC UPH, conducting process characterization to define process parameters and boundary.
• Continuous develop in depth assembly process technical knowledge, well understand process capability/tolerance//spec limit/CpK, and apply key tools PFMEA/QCP/APC/FDC/Alarm on assembly processes Cz/Development/NPI.
• Global leader for cross team collaboration on network BKM, process recipe spec and recipe standardization/conversion.

Technology enablement and development – Process, Material, Equipment

• Participate and support Product Roadmap, to enable key process capability and technology development to ensure packaging solution is ready prior 1st Qual Silicon deliver.
• Frequent engagement with equipment and material supplier (at least interval of monthly or daily/weekly for process issues)
• Collaboration with Supplier and involvement Supplier Roadmap (Material/Equipment/OSAT), to understand market trends and competitor’s direction, ensure key process technology and capability enablement is in-line.
• Frequent review and participant Competitor Analysis, to understand market trends and competitor’s technology/capability boundary
• Engage and follow PDE business process (TGR, TORB, KEG interlock) for new technology qualification, alignment and safe launch

Teamwork and General expectation

• Trainer/Buddy/Mentor for new team members, build effective relationships within team and cross team (peers, counterpart)
• Regularly review data and direction with supervisor. Demonstrate sound data analysis and judgment. Present reports and findings with appropriate conclusions, recommendations and decision making.
• Develop, or coordinate development of, training materials for existing/new process
• Safety Identify and promptly report hazards, follow safety procedures and area work rules including proper PPE, lockout and chemical safety.

Requirements:

• Bachelors/ Masters in Engineering
  
• Showcase leadership experience/potential
  
• Have engaged in projects during internships
• Great teammate
  
• Showcase critical thinking
• Keen interest in Semiconductor industry

Performs hardware, software, semiconductor design or telecomm engineering assignments. This job mapping should be used only if the position cannot be mapped specifically to other design/development engineering jobs.

1. Primary Responsibilities

• Quality Planning & Documentation: Develop, implement, and maintain a project-specific Quality Assurance (QA) and Quality Control (QC) plan that aligns with BCA CONQUAS standards, ensuring all quality processes meet assessment criteria.
• CONQUAS Compliance Monitoring: Monitor construction activities to meet CONQUAS requirements, ensuring each component (structural, architectural, and M&E works) adheres to the system’s quality benchmarks and detailed criteria.
• Material Inspection & Testing: Oversee the inspection and testing of materials used on-site, ensuring conformity with BCA-approved materials and standards under CONQUAS. This includes managing third-party testing agencies when required.
• Site Audits & Inspections: Conduct frequent site inspections and audits focused on CONQUAS criteria, including workmanship, material application, and defect minimization in structural, architectural, and M&E works.
• Non-Conformance Management (NCR): Identify, document, and address non-conformances, particularly those impacting CONQUAS scoring. Recommend corrective actions, ensuring rectifications align with quality standards to avoid future issues.

2. Collaboration with Project Team

• Coordination with Site Engineers & Supervisors: Work closely with site engineers and supervisors to ensure construction methods comply with CONQUAS specifications, providing guidance on quality protocols and rectifications as needed.
• Client & Consultant Interaction: Act as the primary quality liaison with clients and consultants, updating them on QA/QC matters and addressing quality concerns directly related to CONQUAS scoring.

3. Reporting & Documentation

• Quality & CONQUAS Reports: Prepare quality and assessment reports, including checklists and summaries that reflect compliance with CONQUAS scoring standards, inspection records, and non-conformance resolutions.
• Record Management: Maintain comprehensive QA/QC records, including BCA CONQUAS documentation, material certificates, inspection logs, and testing results.

4. Technical Skills and Knowledge

• CONQUAS Standards & Guidelines: In-depth knowledge of BCA’s CONQUAS standards, especially in structural, architectural, and M&E works criteria, assessment scoring, and inspection guidelines.
• Inspection Techniques & Tools: Proficiency in inspection techniques and tools that align with CONQUAS criteria, including non-destructive testing (NDT) and visual inspection practices.

5. Training & Development

• CONQUAS Training for Team: Train the construction team on CONQUAS requirements, quality assessment protocols, and best practices to enhance work quality and scoring.
• Continuous Improvement: Promote continuous quality improvement initiatives that reflect CONQUAS requirements, addressing observed quality gaps with updates to procedures.

6. Qualifications

• Education: Diploma/ bachelor’s degree in civil engineering, construction management, or related field
• Experience: 3-5 years of experience in a QA/QC role within the construction industry, with added experience in managing Quality Marks assessment processes or certifications a significant advantage
• Certifications: BCA-Approved CONQUAS training or relevant quality certification such as ISO 9001:2015 in Quality Management Systems.
• Skills: Strong analytical skills, attention to detail, and the ability to assess and improve quality standards.

7. Key Competencies

• Attention to Detail: Strong focus on details in line with CONQUAS quality metrics for structure, architecture, and M&E works.
• Communication Skills: Ability to clearly communicate quality standards, updates, and CONQUAS requirements to all team members and stakeholders.
• Problem Solving & Decision-Making: Effective in resolving quality issues that may affect CONQUAS scoring, ensuring timely solutions.
• Adaptability: Ability to adjust processes to meet dynamic project needs while adhering to CONQUAS standards.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

This project aims to investigate the performance of cementitious materials and 3D printed concrete against ballistic impact. The researcher will be required to cast and fabricate the various cementitious materials and 3D printed concrete, prepare the logistics and perform the relevant ballistics tests.

Job Requirements

The research fellow should have at least 3 years relevant experience in the following two areas:
• 3D concrete printing;
• Conducting laboratory ballistic tests.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Responsibilities:

Project Design and Development:

• Lead the design process for civil/structural engineering aspects of deep excavation projects.
• Develop detailed geotechnical design plans, ensuring compliance with relevant codes and regulations.
• Conduct engineering analyses, including stability assessments and structural integrity evaluations.

Technical Leadership:

• Provide technical guidance and mentorship to junior engineers and design teams.
• Review and approve design calculations, drawings, and specifications.
• Troubleshoot and resolve complex design and construction issues.

Stakeholder Collaboration:

• Collaborate with multidisciplinary teams, including architects, contractors, and project managers.
• Liaise with clients, regulatory authorities, and other stakeholders to ensure project requirements and standards are met.

Quality Assurance and Compliance:

• Ensure that designs meet local regulations, safety standards, and best practices.
• Participate in audits, inspections, and peer reviews of design work.

Project Management:

• Manage timelines, budgets, and resources for design deliverables.
• Support the preparation of technical reports and documentation.

Job Requirements:

• Bachelor’s or Master’s degree in Civil/Structural Engineering or a related discipline.
• Recognized professional engineering qualifications by the Professional Engineers Board of Singapore.
• A minimum of 10 years of relevant experience in civil/structural engineering, with at least 5 years focused on designing geotechnical works for deep excavation projects.
• Proven expertise in handling projects of a similar size and complexity.
• Strong knowledge of geotechnical design principles, soil mechanics, and structural analysis.
• Proficiency in relevant design software and tools (e.g., Plaxis, AutoCAD, STAAD.Pro).
• Excellent communication, leadership, and problem-solving skills.

Preferred Qualifications:

• Chartership or equivalent professional accreditation (e.g., PE, CEng).
• Familiarity with Singapore’s construction and regulatory environment.
• Experience with risk assessment and mitigation for geotechnical designs.

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering centre serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

As a Software Engineer in the Thales Embedded Product Development Team, you will participate in the design, implementation, validation and deployment of embedded applications products to the major OEM smartphone customers.

Responsibilities:

• Develop, validate and deploy new software components (for example advance software security mechanism and next generation IoT connectivity protocols) for embedded operating systems targeted for mobile and IoT devices, in applications such as mobile payment, digital identity and IoT connectivity
• Participate to the development of next generation operating systems for future devices
• Being in agile development environment to work closely within team and multiple teams around the world to build great products exceeding customer expectations
• Contribute to continuous product and development methodology improvement

Requirements:

• Proficient in C/Java programming languages
• Degree in Electrical/Electronics/Computer Engineering or related fields
• Team player with good communication and collaborative skills, ability to work independently and proactively.
• Knowledge of embedded technology/ecosystem, software security or Javacard will be a plus
• Prior experience as software engineer will be a plus

Other information:

• Working Location: One North
• Working Hours: Monday - Friday, 9am - 6pm

Employment Type: Full-time

About the Role:

We are seeking a skilled and proactive IT Level 2 EUCD (End-User Computing Devices) Assistant Specialist to join our dynamic IT support team. In this role, you will be guided to provide second-level technical assistance to ensure seamless operation and optimal performance of end-user computing devices and systems. Your expertise will be crucial in resolving complex technical issues and delivering exceptional service to our users.

Key Responsibilities:

• Assist in Level 2 technical support for end-user devices, including desktops, laptops, tablets, mobile devices, and peripherals.
• Troubleshoot and resolve hardware, software, and connectivity issues in a timely manner.
• Collaborate with helpdesk to escalate unresolved issues and ensure prompt resolution.
• Install, configure, and maintain end-user devices and related software applications.
• Support system upgrades, patches, and new software rollouts for end-user devices.
• Manage and update IT documentation, including FAQs and troubleshooting guides.
• Monitor and address vulnerabilities and compliance issues on end-user devices with other infrastructure teams.
• Provide excellent customer service by effectively communicating technical solutions to non-technical users.

Required Qualifications:

• Minimum 1 years of experience in IT support, specifically with end-user computing devices.
• Good technical knowledge of Windows, macOS, and mobile operating systems (iOS/Android).
• Experience with Active Directory, Office 365 and remote troubleshooting tools.
• Familiarity with endpoint security solutions and system management tools (e.g., SCCM, Intune).
• Strong problem-solving skills and ability to work independently under minimal supervision.
• Excellent communication and interpersonal skills with a customer-focused mindset.

What We Offer:

• Competitive salary and benefits package.
• A supportive and inclusive work environment.
• Exposure to cutting-edge technologies and projects.

How to Apply:

Interested candidates are encouraged to submit their resume and cover letter outlining their qualifications and experience.

Join us in delivering exceptional IT support and driving technological excellence!

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

IC Designer, designing high frequency circuits targeting for transceiver applications, employing CMOS technology. The candidate needs to come up with novel architecture with speed, power, and area advantage compared to existing architecture.

The job also includes circuit design, pre and post-layout simulation, mask layout and PCB testing.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.

Job Responsibilities:

• Design and commissioning of building electrical systems including, fire alarm, EVCS, power distribution, lighting, lightning protection etc.
• Perform Lighting Power Budget calculations.
• Understand and design Single Line Diagram and perform electrical load calculations.
• Understand and familiarize with Singapore authority requirements and adherence to Singapore building code of practices.
• Involve with project site meetings to understand client requirements and site supervision.
• Participate in Testing & Commissioning phase of completed electrical installations.

Experienced Electrical Engineer with minimum 5 years of relevant experience is welcomed to apply.

Requirements:

• An electrical engineering degree recognised by the PEB of Singapore.
• Familiar with statutory code and requirements.
• Minimum 5 years of work experience as a Electrical design Consultant in an M&E consultancy firm.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a highly motivated Research Engineer to join our team, specializing in the hands-on experimentation and characterization of materials. The successful candidate will work closely with the research team to conduct materials characterization, perform electrochemical testing, and contribute to the development of innovative solutions for lithium battery recycling. This role requires a candidate with hands-on experience in material science techniques and electrochemical methods.
Key Responsibilities:

1. Perform experiments and characterization of materials using analytical techniques such as ICP, XRD, and FTIR.
2. Conduct electrochemical analysis, including cyclic voltammetry, LSV and other related techniques.
3. Prepare samples for testing and ensure proper calibration and maintenance of equipment.
4. Analyze and interpret experimental data, providing clear and concise reports to the research team.
5. Collaborate with cross-functional teams to ensure experimental objectives are achieved.
6. Maintain accurate records of experiments and uphold laboratory safety protocols.
7. Assist in troubleshooting and optimizing experimental procedures as needed.
8. Assist in lab procurement activities.

Qualifications

1. Bachelor’s or Master’s degree in Materials Science and Engineering, Chemical Engineering, or a related field.
2. Hands-on experience with material characterization techniques such as ICP, XRD, SEM and FTIR.
3. Proficiency in electrochemical methods is highly preferred.
4. Strong analytical and problem-solving skills with attention to detail.
5. Effective communication skills, both written and verbal, to document and present findings.
6. Ability to work independently as well as collaboratively within a team.
7. Knowledge of laboratory safety protocols and best practices.
8. Experience in data analysis and interpretation software (e.g., Origin).
9. Familiarity with additional characterization techniques is an added advantage.
10. Prior experience in an R&D or industrial laboratory setting.

Computer Engineering Technical Skills

- Knowledge of operating systems

- Understand computer network and hardware

- Debugging and troubleshooting

- Strong written and verbal communication skills

- Interested and passion in robotics

Jobe Description

- Development and test new features for robotic systems

- Participate in the whole development cycle including design,

development and deployment

- Application of software product onto real-world industrial

environment

- Product fiscovery and evaluation of emerging technologies for robotic

use cases

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

Responsibilities:

• Install, configure, and maintain server operating systems (Windows/Linux/VMWare)
• Deploy, configure, manage, and troubleshoot the following software/hardware - Active Directory, Exchange Server & Exchange Online, VMware ESXi, SAN Storage & Backup
• Perform routine system administration duties
• Monitor servers and troubleshoot issues
• Provide additional support when necessary (eg. backup and storage functions)
• Perform proper documents for all processes
• Recommend solutions and ensure all IT issues have been corrected, and maintain records of work performed
• Provide technical support across the company, including Singapore, regional offices, and retail stores
• Provide technical support to server and network infrastructure and perform regular upgrades to ensure systems remain updated
• Troubleshoot system failures or bugs, and provide solutions to restore functionality
• Assist with any ad-hoc tasks as assigned

Requirements:

• Minimum Diploma in Computer Science, Information Technology, or a similar field
• At least 2-3 years of working experience in the related field
• Experience in configuring, monitoring, and troubleshooting systems
• Able to communicate effectively in both oral and written aspects
• Able to work independently and in a team
• Possesses analytical skills and works well in a fast-paced environment

Job Description

• Attend to customer enquiry on Industrial Automation products
• Work with design team on conceptual design
• Prepare periodical sales report
• Project management support for the entire project cycle
• Work with marketing team to explore new business opportunities

Job Requirement

• Diploma/Degree in any Engineering discipline
• Positive work attitude, willing to put in extra effort during peak period
• Strong communications skills
• Exposed to Project Management, Industrial Automation and/or Robotic Systems
• Working knowledge of Auto CAD

We regret that only shortlisted candidates will be notified.

Responsible to manage system development, implementation and support of EAI applications, including:

• Develops applications that effectively accomplish client objectives and user needs.

• Designs and writes code for applications and maintain applications databases.

• Analyzes and edits existing software applications to improve and optimize functionality, fix problems, and enable their use on new hardware platforms.

• Remodels and adapts applications as needed to optimize performance.

• Identifies specific client needs and preferences related to the application.

• Tests applications extensively to ensure they are error and bug-free.

• Installs applications and acts as technical advisor.

• Communicates with relevant internal technical stakeholders to obtain information on project limitations, performance requirements and interfaces.

• Consults with clients in the design phase to determine client needs.

• Produces software documentation following company/client software process and templates.

• Participates in software product review meetings and team meetings.

• Performs any other related task as required.

Key Requirement

• Bachelor's degree or equivalent in computer science or software engineering or related field.

• Seasoned Software Applications Engineering, Software Development experience, or related work experience.

• Seasoned experience with Programming Languages such as (but not limited to) ANSI C, C++, and Unix Korn Shell programming

• Seasoned experienced with Linux or Unix and Windows operating systems.

• Seasoned experience working with Oracle Tuxedo, IBM MQ Series.

• Experience in banking or financial industry

• Certification in various programming languages, for example (but not limited to) Java, Perl, Python, C++ preferred.