Mechanical Engineer optimize the performance of mechanical products, machinery, and equipment. They assist mechanical engineers to design mechanical products, analyze performance results, and maintain mechanical equipment and machinery. They may be employed in the transportation, industrial, electrical, or manufacturing industries.

Key Job Accountabilities:

· Sustain the respective eWLB processes for all eWLB engineering products and be technical expertise in their respective areas.

· Ensure new products meet special requirements of customer at various processes.

· Ensure smooth transition of new products from engineering qualification to LVM down to HVM by providing technical support at respective processes.

· Perform continuous improvement, engineering evaluations and process optimization through DOE and JMP analysis approach.

· Support the qualification of new and alternative materials (direct and indirect), tools, and equipment.

· Review the FMEA, OCAP and Control Plan of new products to achieve better yield and assembly performance prior and during LVM and HVM transition.

Participate in cost reduction projects during engineering builds.

Required Experience and Qualifications

· Requires B. Eng, B. Sc, M. Eng, M. Sc or PhD in Electrical, Electronics, Mechanical, Chemical Engineering, Physics, Material Science or its equivalent.

· Minimum 2 years of relevant experience in wafer process is preferred.

· Minimum 5 years of experience in relevant areas is an added advantage.

· Familiar with DOE, FMEA, SPC and 8D methodologies, and data analysis using JMP.

· Self-driven and good communications skills.

Technical Sales for Precision Engineering

1 to 2 years sales experience in Engineering Products

Engineering Products examples: Bearings, Linear Guides, Actuators, Linear Motors, Gantries etc

Industries: Semiconductor, Biotech, Renewable energy

Use of Microsoft Office and ERP, CRM will be good

Willing to travel if required

Positive attitude, ability to interact with both internal and external parties

Ability to learn quickly, and problem solve if required

Responsibilities

• Documenting and definng the Factory & Production processes and procedures across the Group
• Recommend and implement improvements to process and process automation
• Deploy and implement the Production processes and procedures in Singapore and overseas
• Manage the next-gen production system for switchgear manufacturing and assembly
• Responsible for the Audit and Compliance of Factory and Process Engineering across the Group
• Any other duties related to operations and process engineering

Requirement

• Degree/Diploma in Electrical, Mechanical Engineering or related field
• At least 2 years of relevant working experience in process engineering in the manufacturing environment
• Have initiative, able to work independently
• Possess strong analytical and problem solving skills
• Good communication and written and presentation skills
• Able to travel overseas

You are responsible for, but are not limited to, the following:

• Develop and optimize unit processes to meet the yield and quality requirements of advanced Replacement Gate 3D NAND parts
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing Dry Etch team on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Identify process simplification opportunities and drive multi-functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Provide advice and counsel to management on significant technical issues. Lead and initiate ground breaking projects through patents/technical papers.
• Communicate and collaborate with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a requirement.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

You should possess

• Masters/PhD in Electrical & Electronics, Chemical, Mechanical, Materials Engineering.
• Strong aptitude for research and development and ability to create production-worthy technologies.
• Ability to develop and maintain relations with multi-functional teams and vendors.
• Strong communication skills (written, verbal and presentation).
• Highly motivated and adaptable to our demanding, dynamic and rapidly changing work environment; flexibility to work for extended hours, as required.
• Ability to travel to US R&D site for few months to engage in collaborative R&D work.

Responsibilities

• Design and implement electrical systems for construction projects.
• Prepare detailed project plans and specifications.
• Conduct site inspections to ensure compliance with electrical codes and standards.
• Troubleshoot and resolve electrical issues on-site.
• Coordinate with project managers, contractors, and other engineers.
• Ensure all electrical work is completed on time and within budget.
• Maintain accurate records of all electrical work performed.
• Provide technical support and guidance to other team members.
• Review and approve electrical designs and plans.
• Ensure all electrical systems are safe and operational.
• Conduct risk assessments and implement safety measures.
• Stay up-to-date with the latest electrical engineering technologies and practices.
• Prepare and present reports on project progress and electrical issues.
• Manage and supervise electrical contractors and subcontractors.
• Ensure compliance with all relevant regulations and standards.
• Participate in project meetings and provide input on electrical matters.
• Develop and implement maintenance schedules for electrical systems.
• Assist in the procurement of electrical materials and equipment.
• Provide training and support to junior engineers and technicians.

Requirements

• Bachelor's degree or Diploma in Electrical Engineering or a related field.
• Minimum of 3 years of experience in electrical engineering

Responsibilities:

-Responsible for all technical support of new product introduction, including product improvement, component production, and the entire process of product assembly and packaging
-Responsible for effective change management: implementation of Engineering Change Notice & get
customer approval for Engineering Change Request
-Receive initial product training, compile, and update product assembly instructions, be responsible for the complete transfer of product technical details from the customer to the company, and continuously improve, and innovate processes and technologies.
-Contact the customer's designated personnel on product-related technical issues.
-Responsible for training the assembly team and implementing improvements within the production team.
-Establish assembly work instructions based on customer & specifications.
-Monitor, identify, develop, and implement improvements in process control systems and equipment.
-Create Bill of Material & routing in ERP for assembly.
-Troubleshoot and optimize assembly processes and follow up with production Improve process robustness, yield, product quality and process time.
-Define and follow up on special tooling requirements.
-Manage customer documentation (drawings, specification, etc.)

Education:

-Possess at least a Degree in Mechanical Engineering or Mechatronics or equivalent.

Skills:

-A minimum 2 years working experience in high precision mechatronics assembly or design.

Experience:

-Knowledge and direct experience in mechanics, electronics, control systems, pneumatics, hydraulics in semicon industry.
-Knowledge in Assembly of mechatronics systems, linear motors, sensors, servos, actuators, dynamics, controls, etc.
-Complex mechatronic systems for test and qualification of design changes.
-Exposure to multi-disciplinary projects, such as imaging/optical systems, semiconductor, or lithography preferred -but not mandatory.
-Able to perform root cause analysis and resolve problems on a conceptual and advanced troubleshooting level.
Proficiency in reading and updating technical drawings.

• Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.
• Interacting with clients, interpreting their needs and requirements, and representing them in the field.
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.
• Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.
• Reviewing the engineering tasks and initiating the necessary corrective actions.
• Developing specifications for the project's needed equipment.
• Creating frameworks to measure the project's metrics and data collection.
• Establishing field test methods and methods for monitoring the quality of those tests.
• Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Job Description
As a BIM Engineer, you will report to the Senior Design Engineer and be responsible for the successful implementation and management of BIM processes in the construction field, specifically focusing on Building Services, Airconditioning, and Mechanical (M&E, ACMV) works. You will collaborate closely with the design department to ensure compliance with engineering and safety requirements and coordinate with stakeholders to maintain the integrity and accuracy of the BIM model throughout the project lifecycle.

Key Responsibilities

1. Construct and manage Building Information Models (BIM) with precision, ensuring the integrity and accuracy of all models. Ensure timely coordination and completion of tasks as assigned by the immediate superior.
2. Ensure all BIM models comply with project specifications and requirements.
3. Maintain and update the model library for all ongoing projects, ensuring that all data remains secure and is treated as company property.
4. Collaborate with project teams to collect site information for updating project BIM models.
5. Work closely with the Quantity Surveying department to provide drawings and information required for tendering, cost estimation, monitoring, and scheduling.
6. Coordinate with the BIM department to validate and confirm the accuracy of BIM designs.
7. Maintain, update, and manage hardware and software essential for the operation of BIM.
8. Assist in the creation of 2D AutoCAD drawings and ensure seamless integration between 2D and BIM models, bridging the gap between office and site operations.
9. Ensure all work conforms to the company’s ISO standards.
10. Support the submission of Operation, Maintenance, and Monitoring (OMM) manuals and media presentations using BIM models.
11. Follow the company's responsibility and authority matrix in the execution of duties.
12. Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes and standards, such as Singapore Code of Practice (CP13), SS553, and the Fire Code.
13. Utilize design software to perform thermal load calculations, energy modelling, and system sizing.
14. Prepare design documents including system layouts, schematics, and specifications.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills:Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage. Inexperienced candidates must be willing to learn, with training provided.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

• Designing: Drawing up plans for new designs, such as buildings, roller coasters, space vehicles, and movie special effects
• Building: Overseeing construction projects
• Testing: Running quality-control tests on new products
• Analyzing: Analyzing existing processes and systems to improve them
• Developing technical data: Developing technical data for materials, dimensions, quantities, and costs
• Providing guidance: Providing guidance for the planning, engineering design, and maintenance of projects

Position Overview:

We are looking for a motivated and skilled Mechanical Design Engineer to join our dynamic team. In this role, you will be responsible for designing, analysing and overseeing the structural integrity of mechanical systems and components for our products. These include specialty vehicles, engines and shelters. This role demands a strong understanding of mechanical design, vehicle systems, and relevant automotive and/or military standards, with a focus on ensuring high performance, reliability, and operational effectiveness.

Key Responsibilities:

· Develop and optimize mechanical designs for mechanical and automotive systems, focusing on efficiency, manufacturability, and sustainability.

· Collaborate with multidisciplinary teams, including electrical and software engineers, to create innovative solutions that meet customer needs.

· Utilize advanced CAD tools (such as SolidWorks) to create 3D models and detailed engineering drawings.

· Perform simulations and analysis to validate designs and ensure they meet performance and safety criteria.

· Create prototypes and conduct hands-on testing to gather data, evaluate performance, and refine designs.

· Participate in design reviews and contribute to brainstorming sessions to drive continuous improvement and innovation.

· Maintain thorough documentation of design processes, test results, and compliance with industry regulations.

· Stay updated on industry advancements and incorporate new technologies and methodologies into your work.

· Support manufacturing team with technical guidance to ensure smooth production processes and troubleshoot any design-related issues.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree or higher qualification is a plus.
• At least 2 years of experience in mechanical design engineering, ideally within the automotive sector.
• Proficiency in 3D CAD software (e.g. SolidWorks) and familiarity with simulation tools (e.g. FEA, CFD).
• Strong knowledge of mechanical design standards, materials, and manufacturing processes.
• Excellent analytical and problem-solving skills with a focus on innovative solutions.
• Effective communication skills, both written and verbal, with the ability to collaborate in a team-oriented environment.
• Results-driven and detail-oriented mindset with a passion for engineering excellence and continuous improvement.

Preferred Skills:

• Strong communication and teamwork skills
• Experience with automotive and/or military vehicle standards and protocols
• Familiarity with vehicle system design and testing procedures.
• Knowledge of mechanical engineering principles as they apply to vehicle systems and structures.
• Experience with project management and leadership in a technical environment.

What we offer:

· Competitive salary and benefits package

· Opportunities for career advancement and professional development

· Collaborative work environment that fosters innovation and communication

· Mentorship and guidance on best practices in automotive and mechanical design

· Opportunity to work on exciting projects at the forefront of automotive technology

As an EUV Photo Project Engineer in Operation Central Team (OCT) Central Process and Equipment Engineering (CPEE) Photo Scanner at Micron Technology, Inc., you will lead project activities to achieve and maintain outstanding EUV Ecosystem in high volume manufacturing.

You will be responsible for providing leadership to the global Micron network to drive Photo EUV Productivity, Hardware, Application, Value Engineering, Continuous Improvement Program, Cost reduction, TOR and BKM governance through technical expertise, business process management and project execution.
You'll be working closely with various teams like Process Equipment Engineering Groups, Technology Development, Procurement, and the Central Team, as well as interacting with equipment suppliers to address manufacturing issues. Effective collaboration with manufacturing sites, Quality Engineering, and other functional departments is key, with an exciting element of international travel to achieve your goals.
It’s a great opportunity for someone who enjoys challenges in State of Art Technology in EUV, teamwork and global experiences!

Responsibilities:

• Ensure a safety-first culture for all program and project solutions.
• Oversee the EUV Litho Cluster, including Scanner and Track installation, to meet TIQ (Tool Installation Qualification) goals.
• Close collaboration with EUV ecosystem suppliers (ASML, TEL, Edward Zenith, Zinter, etc) and internal partners (HVM fabs, Central Teams, Technology Development teams).
• Manage EUV Reticle support tools (e.g., Reticle inspection tools, Reticle Clean tools, EUV Reticle pod storage, Pod Clean tools etc) through closed collaboration with Fab and Central Reticle Teams.
• Drive EUV Industrialization goals by leading Supplier Workstream Programs (Eg: Scanner, Source, Drive Laser, TEL Track etc) to achieve industry outstanding performance in Imaging, Overlay, Rework, Defectivity, and Efficiency (Wafers Per Day).
• Drive and facilitate Governance meetings and cross-collaboration projects with internal and external partners to achieve Micron Strategic Initiatives (Eg: cost, yield, quality, Maxout, environmental sustainability).
• Demonstrate strong communication and reporting skills to provide regular Executive updates on project progress, challenges, and escalation for resource support.
• Oversee processes, guide initiatives, and lead project team members toward goal achievement using analytical skills and problem-solving techniques.
• Proactively identify bottlenecks, drive improvements, and share standard methodologies across HVM fabs.
• Demonstrate ownership and accountability in delivering results.

Requirements:

• Global Factory Network Expertise: Demonstrated understanding of worldwide high-volume manufacturing network operations across different geographical region.
• Leadership and Strategic Initiatives: Proven ability in team development and leading transformative initiatives.
• Manufacturing Knowledge: Familiarity with Front End (FE) manufacturing, reticle manufacturing, and fab processes.
• Project/Resource Management: Ability to manage Global Project and Resource.
• Effective Communication: Skilled at communicating effectively across various organizational levels.
• Customer-Focused Project Management: Proficient in project management with a strong customer focus.
• Continuous Learning Advocate: Continuous learning on the job and provide technical mentoring for peers.
• Minimum 4 years’ experience working as Photolithography Equipment/ Process Engineer or Photo Scanner Engineer in Wafer Fab. ASML EUV Scanner experience will be an advantage
• Bachelors/master’s degree in Electrical, Electronics, Mechanical Engineering

You will be responsible for providing leadership to the global Micron network to drive Photo EUV Productivity, Hardware, Application, Value Engineering, Continuous Improvement Program, Cost reduction, TOR and BKM governance through technical expertise, business process management and project execution.
You'll be working closely with various teams like Process Equipment Engineering Groups, Technology Development, Procurement, and the Central Team, as well as interacting with equipment suppliers to address manufacturing issues. Effective collaboration with manufacturing sites, Quality Engineering, and other functional departments is key, with an exciting element of international travel to achieve your goals.
It’s a great opportunity for someone who enjoys challenges in State of Art Technology in EUV, teamwork and global experiences!

We have an exciting position in the explosive growth area of Data Center Enterprise Storage. In this role you will be responsible for
developing the most advanced semiconductor devices to support stringent high capacity storage needs across all the top tier service
providers. Our IC R&D team is looking for an experienced physical design engineer to develop high speed custom analog/mixed signal
products for the storage industry. A qualified applicant would work closely with circuit design engineers to lay out high-speed custom analog
designs and develop mask layouts for customer products, as well as printed circuit board designs. You will join a cross-functional team
responsible for developing leading edge high-speed custom IC products that ultimately achieve high volume production.

Job Responsibilities
- Lay out high speed, high performance analog/mixed-signal custom integrated circuits
- Work directly with a team of engineers to determine floor plan, routing and I/O requirements
- Perform IC design rule and connectivity verification and drive products through mask release flows.
- Contribute to methodology improvements to increase layout and verification efficiency.
- Create reticle layouts, documentation, and PO’s to release products for mask build.
- Complete PCB layouts for test hardware.

Requirements/Qualifications should be:
- Bachelor's degree in Electrical Engineering (or related field)
- 5 years experience in custom analog IC physical design
- Experience with schematic-driven layout, floor planning, chip level routing, design for manufacturing and design rule and connectivity
verification is preferred
- Experience using Cadence Virtuoso XL preferred
- Experience with Cadence Allegro for PCB layout preferred
- Familiarity with both analog and digital layout tools and flows, circuit design concepts and IC manufacturing processes desired
- Strong communication skills
- Understanding of silicon process technologies (CMOS and Bipolar) and device physics would be a plus.
- Proven analytical skills (application of math and physics to solve problems)
- Must be meticulous and demonstrate attention to detail.

Summary:

The incumbent will collaborates closely with the indoor sales team to source, prepare quotations, and liaise with the Customer Service team to fulfill orders. The executive is expected to be conscientious and able to work under pressure in order to coordinate between the sales team, the vendors/suppliers, forwarders, the customer service team, and the customers. He/She is expected to be proficient in English as well as basic computer software such as Excel and Outlook. Experience with Business Central is a plus.

Possible coverage areas include North Asia (China, Taiwan, Korea, and Japan), Southeast Asia (Cambodia, Myanmar, Laos, Thailand, the Philippines) and Singapore. For regional roles, business travel of up to 50% per month is expected. Experience including, but not limited to, local language fluency, past stints, and existing aerospace networks in these countries are a big plus.

Candidates are also expected to have previous experience trading aerospace consumables such as tapes, chemicals, tooling, and raw materials. Experience with rotable programs is also welcomed.

Job Responsibilities:

· Further develop current accounts and hunt for new accounts in assigned territories. These include airlines, MRO shops, 3P repair shops, and air forces.

· Closely partner with the indoor sales team (when available) to source, prepare quotations, and coordinate with the customer service team to fulfill orders. Functions include, but are not limited to -

a. Source and expand existing vendor pool;

b. Negotiate with vendors for best pricing and lead time;

c. Prepare quotations for the customers;

d. Process purchase orders from the customers by coordinating with the Customer Service team by way of systematically sending out the relevant quotation from the vendor and purchase order from the customer;

e. Track and monitor outstanding sales orders.

· Support sales analysis.

· Any other duties as assigned by the supervisor.

Requirements

1. Minimum 3 years of experience in Aerospace industry.

2. At least 2 to 5 years of experience in general admin or sales support.

3. Strong interpersonal, effective written, and verbal communication skills in English.

4. Good working knowledge of Microsoft Office.

5. Team player with good interpersonal skills.

6. High integrity, reliability, and honesty.

7. Independent and able to work in a fast-paced, goal-oriented, and time-sensitive global environment

Electrical and Electronics Engineer

Roles & Responsibilities

Job Description

· Be responsible for designing new product developments and sustaining matured products in the semiconductor automation equipment industry.

· To design and layout system-level electro-mechanical modules and interconnects.

· Maintain development and engineering documents and provide technical support to production and field.

· Ensure world-class quality and competitive cost.

· Committed to meet or exceed customer requirements and schedule.

Requirements

· Diploma / Degree in electrical and electronic engineering, mechatronics, or electro-mechanical engineering. ITE with more than 10 years’ experience will be considered.

· At least 1 year of relevant experience

· Strong fundamentals in actuators, servo motors, sensors, power supplies, cabling, and electro-mechanical engineering.

· Experience in safety consideration, good grounding practice, understanding and elimination of electrical noise, EMI/EMC compliance, and international standards requirements like CE, SEMI, IE, etc

· Knowledge of CAE/CAD such as PADS, AutoCAD, SolidEdge, MATLAB, etc.

· Familiar with measurement equipment such as oscilloscope, current probe, position sensor, accelerometer, etc.

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Description:

• Support Sales Manager to develop comprehensive BMS estimation which include preparation of tender submission and marketing materials during tender and follow up stage.
• Understand technical drawings and specification requirements.
• Establish good relationship with vendors and negotiate with them.
• All other ad hoc duties as assigned.

Requirements:

• At least Higher Nitec/ Diploma in Engineering Discipline
• Preferably some technical knowledge of BMS System
• Good communication skills and able to speak English well
• Well versed with Microsoft Office including Excel, Words, Powerpoint
• Team player
• Able to prioritizes, organized and multitasking
• Fresh graduates are welcome to apply. Training will be provided.

Responsibilities:

• Customises CMS database checksheets and allocation of checksheets based on latest engineering drawing revisions and punchlist updates for mechanical/ process/safety /HVAC discipline
• Prepares boundary drawings as per subsystem listing
• Prepares procedures/ work method statements and risk assessment for mechanical/ process/ safety/ HVAC commissioning activities
• Attends Factory Acceptance Test at vendors' premises, as required
• Leads a team of mechanical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides
• Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability
• Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities
• Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner
• Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities, etc
• Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc
• Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures
• Reviews completed commissioning documentation such as checksheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.
• Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

Requirements:

• Min. 5 years years of commissioning experience in the Oil & Gas/ Wind Farm industty
• Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc
• Good knowledge and experience in commissioning activities of oil and gas/ wind farm facilities
• Familiar with permit-to-work systems and lock-out tag-out procedures
• Good analytical, problem solving and planning skills.
• Familiar with Project Specifications, Technical and HSE Standards
• Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.
• Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Amiralty Yard)

60 Admiralty Road West, Singapore 759947

(Tuas Yard)

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description & Requirements

Responsibilities:

-Responsible for technical drawings for electrical designs

-Develop PLC Program and HMI Graphics for projects

-Conduct Testing & Commissioning and Site Acceptance

-Execute 1 or more Automation Projects concurrently

Requirements:

-Diploma/Bachelor Degree in Electrical/Mechatronics

-Knowledge in PLC (Omron NJ) / C++ / C# / ACAD / Microsoft Office

-Preferably with Automation experience

Job Requirements:

Education:

• Bachelor’s degree in Civil Engineering, Construction Management, or related field.

Experience:

• Minimum 3–5 years of relevant experience in construction project management in Singapore.
• Hands-on experience with local construction projects and regulatory requirements.

Skills:

• Proficiency in project management tools (e.g., MS Project, Primavera) and CAD software.
• Strong understanding of construction methods, materials, and local building regulations.
• Excellent leadership, problem-solving, and time-management abilities.
• Effective communication skills to liaise with stakeholders at all levels.

Key Responsibilities:

• Plan and execute construction projects, including budgeting, scheduling, and resource management.
• Collaborate with architects, contractors, and consultants to ensure project alignment with design specifications.
• Supervise on-site activities to ensure adherence to safety, quality, and compliance standards.
• Resolve technical and operational challenges during project execution.
• Prepare and present progress reports to stakeholders.
• Ensure compliance with Singapore's building codes, safety regulations, and environmental standards.

Responsible for creating, improving, and protecting our immediate environment. They plan and oversee construction and rebuilding, as well as the maintenance of roads, bridges, tunnels, railways, dams, harbors, power plants, and airports.Managing, designing, developing, creating and maintaining construction projects,Conducting on-site investigations and analyzing data,Assessing potential risks, materials and costs.

• Create ATE (Advantest SmarTest PS1600 & EXA Scale) test program and integrate various test functions in test flow to support First Silicon bring up for wafer and package in NPI phase.
• Perform design validation/characterization/experiment on ATE across process, voltage, frequency and temperature. Evaluate test and product margins, debug and communicate result/yield/analysis to various teams.
• Utilize ATE test tools and other test instrument to debug and analyze the test, design and product issue.
• Support ATE test hardware design (Including build instruction, SI/PI...etc.) and debug.
• Support test time reduction.
• Support proto demands/qualification for IP owner and customer requests.
• Complete test development, test program transfer and product release at respective milestones.
• Initiate, plan and execute multiple projects to achieve target.
• Good knowledge of product engineering, failure analysis and manufacturing test process.
• Interest in learning, researching, sharing and implementing new technology and test methodology.
• Good written/Oral communication skills.
• Result orientated and team work.

Job Responsibilities:
- Maintains the Company Integrated Management System, ensuring all business processes are documented, have a designated owner and a plan for their maintenance, aligned to Survitec strategy and associated accreditation and/or regulatory frameworks.

- Perform internal audit procedure and schedule as per Department audit plans, to include the audit Scope, Objective and Criteria. Deliver the audit report including findings; agree on corrective actions with auditees and refer findings to the Manager.

- Investigate non-conformances using current and appropriate methods, systems, and procedures, taking action to solve immediate compliance issues.

- Identifies shortcomings in quality processes or outputs, identifies root cause and works with internal stakeholder to adjust processes or working practices to remove or mitigate any production quality issues; uses established change management programs to address issues and deliver sustained improvements.

- Attend aviation related training and create/refresh and update on internal company aviation training notes.
Conduct internal company training as per aviation requirements.

- Implements systems to ensure compliance with QHSE policies, group and Customer requirements; ensures audit, inspection and risk management are adhered to and embedded throughout the system.

- Document control system management, revision and updating.

- Defines and communicates the processes and schedule for audit, working with colleagues from the Quality function to ensure all supplier, operational, technical, health, safety and environmental audit activity is carried out as planned.

- Leads and participates in quality, non-conformance and customer complaint investigations.

- Provides written reports on audit and investigation findings, implements and monitors CAPA and improvement actions. Ensures findings are reported and escalated appropriately.

- Works with Survitec QHSE colleagues to develop tools and dashboards for the statistical analyses on which recommendations for improvement are based. Ensures outputs from QHSE reporting tools and dashboards are communicated to and understood by the business.

- Inform manager of audit findings and compliance issues, including capability gaps, workflow issues or matters requiring quality development or improvement.

- Any others tasks/projects as assigned by line manager from time to time.


Job Requirements:
- Degree/Diploma in Engineering (preferably Quality Engineering).

- At least 2 years of Quality Assurance experience in Aviation industry.

- Knowledge of ISO 9001, ISO 14001, and TS 16949.

- Proficiency in statistical tools and Microsoft Office.

- Strong analytical, problem-solving, and communication skills
Certified Internal/Lead Auditor (preferred).

- Train the trainer qualification will have added advantage.

Responsibilities:

• Define Product Architecture, Conceptualize and Prototype new designs based on specifications
• Participate in Design and Development of baseband analog/logic/digital circuit for wireless audio products.
• Perform circuit integration, schematic generation and circuit/system levels testing and optimization.
• Ensure design processes and documentation meets company requirements
• Work with a team of engineers and/or designers through different phases of the product development.
• Willing to travel overseas to support prototype builds and customers reviews

Requirement:

• Degree in Electrical/Electronics/Communication Engineering.
• Min 3 years experience in baseband design and Development
• Hands-on experience in design and test of Baseband/Audio/Power management is required.
• Knowledge of baseband system integration for audio, power, battery, memory and processor components are desired.
• Experience in audio/wireless hardware system design is an advantage.
• Analytical, independent, highly energized, good interpersonal skills, excellent communication skills and good leadership qualities.
• Excellent teamwork skills, flexibility, and ability to handle multiple tasks.

The above information on this description has been designed to indicate the general nature, and level, of the work performed by this position. It is not designed to contain, or be interpreted, as a comprehensive inventory of all duties, responsibilities and qualifications required.

Interested candidates may also apply or write in to CS Chua, EA 12C6130/ R1548619 [email protected]. Shortlisted candidates will be contacted for a discussion.

The intern will work in the Production department of Keystone Cable factory. He will report to the Plant Manager (mentor) and work alongside engineers / technicians to identify opportunities for factory operations efficiency and productivity improvement.

Expected tasks / responsibilities

1. Job shadow / On-job training, OJT of Production Engineer to understand cable manufacturing process.
2. Problem understanding of current methods of manual production data collection with the intent of improving the process flow and to digitize where possible.
3. Data acquisition of shop floor data to set baseline targets for production improvement
4. Research and testing of hypothesis on production parameters we want to improve
5. Project management of one or two projects to improve factory productivity / efficiency using existing or acquired skillsets.

Learning outcomes and objectives

1. To allow intern to gain a good understanding of the work and responsibilities of a production engineer in a factory.
2. To project manage one or two projects that tackle factory productivity and efficiency problem statements.
3. To apply and extend intern’s skillsets on shop floor data collection and analysis with the objective of improving existing factory systems.
4. To allow company and intern to assess compatibility for potential collaboration opportunities in the future.

Requirements

Personal traits requirements: Respect for individual, Team player, Good communication skills, Willing to accept new challenges and learn.

Technical requirements: Industrial control and automation, Power systems, PLC systems, Basic programming skills will be a plus: Python, SQL database, MS Office proficiency

*Kindly indicate the period you are able to commit to the internship in resume

*Only available for internship period beyond August