Responsibilities:

• Define Product Architecture, Conceptualize and Prototype new designs based on specifications
• Participate in Design and Development of baseband analog/logic/digital circuit for wireless audio products.
• Perform circuit integration, schematic generation and circuit/system levels testing and optimization.
• Ensure design processes and documentation meets company requirements
• Work with a team of engineers and/or designers through different phases of the product development.
• Willing to travel overseas to support prototype builds and customers reviews

Requirement:

• Degree in Electrical/Electronics/Communication Engineering.
• Min 3 years experience in baseband design and Development
• Hands-on experience in design and test of Baseband/Audio/Power management is required.
• Knowledge of baseband system integration for audio, power, battery, memory and processor components are desired.
• Experience in audio/wireless hardware system design is an advantage.
• Analytical, independent, highly energized, good interpersonal skills, excellent communication skills and good leadership qualities.
• Excellent teamwork skills, flexibility, and ability to handle multiple tasks.

The above information on this description has been designed to indicate the general nature, and level, of the work performed by this position. It is not designed to contain, or be interpreted, as a comprehensive inventory of all duties, responsibilities and qualifications required.

Interested candidates may also apply or write in to CS Chua, EA 12C6130/ R1548619 [email protected]. Shortlisted candidates will be contacted for a discussion.

Position Summary

This position is involved in Supplier Quality activities that improve, monitor and measure Illumina’s compliance with the Quality System Regulations, Illumina Quality policies, FDA regulations and ISO standards as well as Illumina product quality for current operation and compliance objectives.

Responsibilities:

• Support qualification of new Suppliers and Partners for materials and services including risk assessments, audits and other supplier on-boarding activities
• Provide support to investigation teams in determining root causes on material quality issues and initiate/ensure corrective and preventive action plans are developed and executed
• Interface with Suppliers/CM (Contract Manufacturer), Engineering / Manufacturing / Quality Assurance / Procurement departments to drive for quality improvements, specifically on incoming rejects, workmanship defects and primitive failures
• Participate in Quality review activities with supplier/CM to identify improvement opportunities to meet quality expectation
• Compile, evaluate and report on supplier/CM quality performance metrics for scorecard and monitoring
• Monitor to ensure supplier’s preventive and corrective actions are implemented and effective
• Participate with NPI team in selection of new suppliers

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Bachelor’s Degree in Engineering, Life Sciences, or related field with 1-3 years of relevant experience
• Experience in driving suppliers to improve quality performance
• Experience in conducting supplier audits
• Good understanding of FDA regulatory environment (CFR 820), 501k and ISO 13485 strongly preferred.
• Experience in medical device / pharmaceutical / IVD is preferred
• Developing basic knowledge of quality tools
• Beginner to intermediate experience with Microsoft tools and spreadsheets, charting, graphing tools and presentation tools.
• Experience with electronic production life (PLM), enterprise resource planning tools (SAP) and etc are preferred
• Experience with statistical analysis packages, eg, JMP, Minitab are preferred
• Detailed oriented, well organized and able to work independently and in teams.
• Good communication and collaboration skills
• Ability to travel as needed

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Description:

• Support Sales Manager to develop comprehensive BMS estimation which include preparation of tender submission and marketing materials during tender and follow up stage.
• Understand technical drawings and specification requirements.
• Establish good relationship with vendors and negotiate with them.
• All other ad hoc duties as assigned.

Requirements:

• At least Higher Nitec/ Diploma in Engineering Discipline
• Preferably some technical knowledge of BMS System
• Good communication skills and able to speak English well
• Well versed with Microsoft Office including Excel, Words, Powerpoint
• Team player
• Able to prioritizes, organized and multitasking
• Fresh graduates are welcome to apply. Training will be provided.

This is an exciting and fast-paced position! Our team Application Development & Support(ADS) delivers software solutions to leadership and engineers throughout Micron's global manufacturing network. As Operations Central Team (OCT) Software Development Engineer at Micron Technology, Inc., we have the chance to create and improve Micron systems and processes on a global scale.

Collaborate with customers across departments and geographical sites to design, develop, innovate and support software throughout the development life cycle. Be part of the team to support efficient business processes by maintaining a focus on global alignment, and participating in efforts to research and influence technology roadmaps.

Responsibilities:

• Demonstrate Micron core values People, Innovation, Tenacity, Collaboration, and Customer Focus
• Gather requirements by working closely with customers
• Design, develop, debug, document, test, and deploy applications
• Collaborating with other developers on the team
• Working closely with Business Operation Teams, Product and Application Development teams, and other internal customers during application development and deployment
• Provides 24x7 Support

Project Description

• Join an agile team to develop a web solution for Micron globally, including but not limited to API, ETL, and database projects.
• Work on new or existing projects.

Learning Outcomes

• Gain hands-on development experience in modern tools and pioneering tech stacks (Angular, OpenShift, Azure)
• Learn to work effectively in the Agile development team to develop successful product with timely delivery
• Gain domain knowledge on semiconductor industry
• Develop problem-solving and analytical skills and good software engineering practices
• Enhance communications, interpersonal, and other critical skills in the professional environments

Qualifications and Traits

• Proficient in Angular, .NET Core, C#, and SQL.
• Knowledge of containerized deployment with Docker, Kubernetes, and OpenShift is a plus.
• Strong analytical, problem-solving, and interpersonal skills.
• Motivated to work in a dynamic and fast-paced environment.
• Ambitious and driven to complete tasks independently while recognizing ways to improve processes.
• Active team participation, partnership, and consensus-building skills.
• Good verbal and written communication skills.

Education Required

Bachelors Degree or equivalent experience in Computer Science or related field of study

Experience Required

2 years of experience in 3 or more of the following:

• Experience in front-end web development (preferably Angular, ASP.NET)
• Proficiency in C# and Object Oriented Programming
• Proficiency in HTML, CSS, JavaScript
• Experience in RESTful Web API development (preferably ASP.NET Core, Node.js)
• Experience with Agile development methodologies
• Good understanding of one or more database technologies (MSSQL, ORACLE, Snowflake, MongoDB, CouchDB)
• Experience in SSIS, SSRS, Tableau, PowerBI or any Business Intelligence technologies Bonus if you have experience in Python and cloud programming, CICD (Azure), NiFi
• Knowledge of source code repositories (Git)
• Knowledge of SQA is a bonus

The intern will work in the Production department of Keystone Cable factory. He will report to the Plant Manager (mentor) and work alongside engineers / technicians to identify opportunities for factory operations efficiency and productivity improvement.

Expected tasks / responsibilities

1. Job shadow / On-job training, OJT of Production Engineer to understand cable manufacturing process.
2. Problem understanding of current methods of manual production data collection with the intent of improving the process flow and to digitize where possible.
3. Data acquisition of shop floor data to set baseline targets for production improvement
4. Research and testing of hypothesis on production parameters we want to improve
5. Project management of one or two projects to improve factory productivity / efficiency using existing or acquired skillsets.

Learning outcomes and objectives

1. To allow intern to gain a good understanding of the work and responsibilities of a production engineer in a factory.
2. To project manage one or two projects that tackle factory productivity and efficiency problem statements.
3. To apply and extend intern’s skillsets on shop floor data collection and analysis with the objective of improving existing factory systems.
4. To allow company and intern to assess compatibility for potential collaboration opportunities in the future.

Requirements

Personal traits requirements: Respect for individual, Team player, Good communication skills, Willing to accept new challenges and learn.

Technical requirements: Industrial control and automation, Power systems, PLC systems, Basic programming skills will be a plus: Python, SQL database, MS Office proficiency

*Kindly indicate the period you are able to commit to the internship in resume

*Only available for internship period beyond August

We have an exciting position in the explosive growth area of Data Center Enterprise Storage. In this role you will be responsible for
developing the most advanced semiconductor devices to support stringent high capacity storage needs across all the top tier service
providers. Our IC R&D team is looking for an experienced physical design engineer to develop high speed custom analog/mixed signal
products for the storage industry. A qualified applicant would work closely with circuit design engineers to lay out high-speed custom analog
designs and develop mask layouts for customer products, as well as printed circuit board designs. You will join a cross-functional team
responsible for developing leading edge high-speed custom IC products that ultimately achieve high volume production.

Job Responsibilities
- Lay out high speed, high performance analog/mixed-signal custom integrated circuits
- Work directly with a team of engineers to determine floor plan, routing and I/O requirements
- Perform IC design rule and connectivity verification and drive products through mask release flows.
- Contribute to methodology improvements to increase layout and verification efficiency.
- Create reticle layouts, documentation, and PO’s to release products for mask build.
- Complete PCB layouts for test hardware.

Requirements/Qualifications should be:
- Bachelor's degree in Electrical Engineering (or related field)
- 5 years experience in custom analog IC physical design
- Experience with schematic-driven layout, floor planning, chip level routing, design for manufacturing and design rule and connectivity
verification is preferred
- Experience using Cadence Virtuoso XL preferred
- Experience with Cadence Allegro for PCB layout preferred
- Familiarity with both analog and digital layout tools and flows, circuit design concepts and IC manufacturing processes desired
- Strong communication skills
- Understanding of silicon process technologies (CMOS and Bipolar) and device physics would be a plus.
- Proven analytical skills (application of math and physics to solve problems)
- Must be meticulous and demonstrate attention to detail.

· Responsible for all conceptual design, mechanical design, cost control, fabrication parts and BOM generation of automated equipment.

· Support RFQ proposal, documentation for manual, ECN, work instruction, specification and test plan.

· Responsible for project co-ordinating and project timeline control

· Good knowledge of using solid works 3D cad software a must.

· Knowledge in motor, pneumatic component, sensors and LM parts selection.

· Minimum 2 year of working experience

· At least a Diploma or ITE in Mechanical/Mechantronic

Job Requirements:

Education:

• Bachelor’s degree in Civil Engineering, Construction Management, or related field.

Experience:

• Minimum 3–5 years of relevant experience in construction project management in Singapore.
• Hands-on experience with local construction projects and regulatory requirements.

Skills:

• Proficiency in project management tools (e.g., MS Project, Primavera) and CAD software.
• Strong understanding of construction methods, materials, and local building regulations.
• Excellent leadership, problem-solving, and time-management abilities.
• Effective communication skills to liaise with stakeholders at all levels.

Key Responsibilities:

• Plan and execute construction projects, including budgeting, scheduling, and resource management.
• Collaborate with architects, contractors, and consultants to ensure project alignment with design specifications.
• Supervise on-site activities to ensure adherence to safety, quality, and compliance standards.
• Resolve technical and operational challenges during project execution.
• Prepare and present progress reports to stakeholders.
• Ensure compliance with Singapore's building codes, safety regulations, and environmental standards.

Responsible for creating, improving, and protecting our immediate environment. They plan and oversee construction and rebuilding, as well as the maintenance of roads, bridges, tunnels, railways, dams, harbors, power plants, and airports.Managing, designing, developing, creating and maintaining construction projects,Conducting on-site investigations and analyzing data,Assessing potential risks, materials and costs.

• Create ATE (Advantest SmarTest PS1600 & EXA Scale) test program and integrate various test functions in test flow to support First Silicon bring up for wafer and package in NPI phase.
• Perform design validation/characterization/experiment on ATE across process, voltage, frequency and temperature. Evaluate test and product margins, debug and communicate result/yield/analysis to various teams.
• Utilize ATE test tools and other test instrument to debug and analyze the test, design and product issue.
• Support ATE test hardware design (Including build instruction, SI/PI...etc.) and debug.
• Support test time reduction.
• Support proto demands/qualification for IP owner and customer requests.
• Complete test development, test program transfer and product release at respective milestones.
• Initiate, plan and execute multiple projects to achieve target.
• Good knowledge of product engineering, failure analysis and manufacturing test process.
• Interest in learning, researching, sharing and implementing new technology and test methodology.
• Good written/Oral communication skills.
• Result orientated and team work.

Assisting the Support Engineer or Software Engineer in problem resolution beyond the capability of the 1st Level Support Staff.

• Performing system recovery if needed.

• Escalating unsolvable problems to the 3rd Level Support Staff and reports the escalation to superior.

• Ensuring that the System runs according to contractual specifications after problem resolution.

• Providing advice on system / database performance monitoring and tuning.

• Ensuring deployments of approved patches/releases are implemented accordingly to Change Request.

• Complete all Service Requested accordingly to SLA timeframe.

• Assisting the Customer in the verification, isolation and/or provision of a temporary work-around for the problem logged beyond 2nd Level Support Staff capability.

• Escalating unsolvable system problems and service request to the OEM/Vendor for technical support.

• Coordinating system development tasks to include design, integration and formal testing on the Change Request.

• Overseeing all transitions into production on the Change Request.

• Developing and complete actions in system specifications, technical and logistical requirements and other disciplines on the Change Request.

• Creating and maintain programmatic and technical documentation to insure efficient planning and execution on the Change Request.

• Managing and document system configurations on the Change Request.

• Perform troubleshooting and resolve incident based on SLA.

• Generating the relevant administrative records and reports.

The intern will work in the Production department of Keystone Cable factory. He will report to the Plant Manager (mentor) and work alongside engineers / technicians to identify opportunities for factory operations efficiency and productivity improvement.

Expected tasks / responsibilities

1. Job shadow / On-job training, OJT of Production Engineer to understand cable manufacturing process.
2. Problem understanding of current methods of manual production data collection with the intent of improving the process flow and to digitize where possible.
3. Data acquisition of shop floor data to set baseline targets for production improvement
4. Research and testing of hypothesis on production parameters we want to improve
5. Project management of one or two projects to improve factory productivity / efficiency using existing or acquired skillsets.

Learning outcomes and objectives

1. To allow intern to gain a good understanding of the work and responsibilities of a production engineer in a factory.
2. To project manage one or two projects that tackle factory productivity and efficiency problem statements.
3. To apply and extend intern’s skillsets on shop floor data collection and analysis with the objective of improving existing factory systems.
4. To allow company and intern to assess compatibility for potential collaboration opportunities in the future.

Requirements

Personal traits requirements: Respect for individual, Team player, Good communication skills, Willing to accept new challenges and learn.

Technical requirements: Industrial control and automation, Power systems, PLC systems, Basic programming skills will be a plus: Python, SQL database. MS Office proficiency

*Kindly indicate the period you are able to commit to the internship in resume

*Only available for internship period beyond August

As the Facilities SmartFac & Control Engineer, you are required to lead engineering and maintenance works in the fields of SMART Fac and Control systems on site, with the necessary guidance and direction from Facilities organization, to achieve facilities department, site, facilities corporate and company goals.

• Lead on site Smart System transformation and on implementation of Smart FAC projects with AI-enabled detection and analytics in collaboration with other Micron Departments.
• Lead on Sustainability and Environmental Control system deployment with early detection and predictions, using Industry 4.0 system.
• Lead on labor productivity automation projects with innovative idea to improve facilities team efficiency.
• Plan, design and lead Control Automation engineering projects includes new construction, system upgrading and quality improvement.
• Lead troubleshooting and attend to abnormalities in support of Operations in a timely manner on system under Smart FAC & Control section when required.
• Lead on the planning and supervise Preventive and Corrective Maintenance work activities, priorities and reallocate resource when required.
• Perform capacity tracking and planning for Instrumentation and Control systems.
• Acquire estimated cost and raise purchase requisition for service or parts necessary for repair and maintenance purpose, when required.
• Utilize computer base software to document and analyze records of work order and equipment history.

Job Requirements:

• Bachelor Degree in Electrical/Electronics/Computer engineering or equivalent related field.
• Good knowledge on Python, Java, C/C++, C#, SQL, machine learning.
• Good knowledge in programming of programmable logic controller (PLC) and process automation PID control.
• Good knowledge of various handheld tool, portable and panel measuring device and equipment.
• Ability to understand and use schematic, single-line drawing and related equipment and system documentation
• Ability to work in a team environment with various professional level.

Your responsibilities will include, but are not limited to

• Manage network tool utilizations strategies and benchmark performance to optimize the company’s deployed capital
• Manage and communicate improvement and implementation plan to all relevant levels and functions in Manufacturing
• Optimize capacity of install equipment and lead sites and tool level optimization studies for throughput enhancement
• Collaborate with partners to understand future tool and process roadmaps. Able to assess network capacity impacts of process changes
• Improve financial analyses before capital equipment are purchased through automating metrics optimizations, process flexibility, capacity sharing and equipment repurpose
• Attention to detail and ability to work in situations where changes is fluid
• Ability to spot, question and highlight differences to drive resolutions with relevant stakeholders

Requirements :

• Bachelors’ Degree in Engineering, Computer Science, or a Business-related or quantitative field (Finance, Economics or similar discipline). MBA or Master’s degree is a plus
• Experience turning complex and ambiguous problem statements into structured solution while working in a highly multi-functional environment
• Experience operating independently while maintaining a high degree of organization, control and change management
• Experience analyzing and interpreting data, drawing conclusions, defining recommended actions, and reporting results cross diverse technical and non-technical groups
• Experience working in teams, establishing and maintaining multi-functional relationships
• Experience in a combination of capacity analysis, business analysis or process analysis is advantageous

Work Location

• F16 Taichung, Taiwan
• F15, Hiroshima, Japan
• F10A, Singapore

Job Overview:

The Assistant Project Engineer will report directly to the Project Manager and manage ACMV (Air-Conditioning and Mechanical Ventilation) works within the built environment. The role involves ensuring that all project activities comply with engineering and contractual requirements. This position requires collaboration with the design department to meet engineering and safety standards, while overseeing contracts, costs, schedules, and overall project completion.

Key Responsibilities:

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Support the development and maintenance of the BIM model, ensuring it is accurate and up-to-date.
• Assist in the preparation and management of project documentation, including drawings, specifications, and reports.
• Collaborate with the client to help meet their requirements under the guidance of the Project Engineer
• Assist in verifying changes to project scope, schedule, or budget, ensuring compliance.
• Help in resolving technical or contractual issues that arise during the project, with the support of the senior team.
• Provide assistance in managing the construction process to ensure it progresses on time, within budget, and meets quality standards.
• Support monitoring the performance of contractors, ensuring they meet their obligations.
• Coordinate with various consultants and contractors, under the guidance of the Project Engineer.
• Assist in the handover process of the project to the client.
• Comply with all relevant Singapore regulations and standards under the supervision of senior project staff.
• Promote safety management activities and assist in compliance inspections.
• Assist in obtaining necessary permits and approvals.
• Support sustainability efforts and ensure the project adheres to environmental standards.
• Help minimize disruption to the public during construction by coordinating with authorities.

Requirements:

• Diploma or Degree in Mechanical Engineering, Building Services, Project Management, or a related field. ACMV project experience is preferred.
• Bizsafe Level 2 safety certification or higher preferred.
• A minimum of 1 year of experience in a related field is preferred, though fresh graduates are welcome to apply.
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Career development focused on progression and growth.
• AWS included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.

Responsibilities:

• Develop and execute API/UI/Functional tests with CI/CD.
• Design, develop and maintain automated test framework, tools and test cases
• Work in a scrum team of software developers and domain experts. Accountable for quality of the software product under development.
• Perform manual testing when necessary.
• Software release following SGLC guidelines. Collaborate with peers to identify opportunities for process improvement.
• Participate in design and code reviews
• Learn, grow and have fun with highly capable engineers and scientists from various disciplines in a global R&D team

All listed tasks and responsibilities are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Who we are looking for:

• Strong understanding in automated testing using at least one programming language, such as Python, Java, C#, TypeScript or JavaScript
• Strong understanding in Linux Shell scripting or equivalent command line tools
• Knowledgeable with software test methodologies such as API, Web, GUI, performance testing, with hands-on experience in frameworks and tools such as Karate, Cucumber, Gherkin and Playwright
• Strong analytical capabilities and able to troubleshoot complex issues
• Good knowledge with CI/CD tools such as Jenkins, TeamCity, GitHub Actions
• Strong understanding in databases such as MySQL or PostgreSQL, cloud computing such as Amazon Web Services and Docker/Kubernetes is a plus
• Solid understanding of SDLC processes
• Be curious, detail oriented, and analytical, with a proven ability to learn quickly
• Proactive and team-oriented with strong collaboration skills; comfortable working across functions and time zones

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Preferred Experience/Education:

• Typically requires a minimum of 0 - 2 years of related experience with a Bachelor’s degree
• Experience in biotech and bioinformatics is a plus

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects.

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies.

· To prepare final design configurations, layouts, solid models and production/engineering data.

· To assist in preparation of machine documentation, specifications, manual.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, resourceful and organized.

Job Requirements:

· Degree/Diploma or relevant in Mechanical Engineering.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable.

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

Qualified candidates please send your application with full resume stating current and expected salary.

DESCRIPTION

- Sizing, calculation, design layour, quantities and estimation based on drawings

- Provide technical support to sales team

- Prepare quote and technical proposal

- Attend meetings with consultants, engineers and clients

- On site troubleshooting/servicing work, resolving technical issues including system testing and commissioning

- Any adhoc tasks assigned by the management from time to time

REQUIREMENTS

- Knowledge in electrical and electronics

- Competent in AutoCAD

- Knowledge of BIM

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

This position focuses on strategy and modeling creation, improving global standardizations, enable sustainability through automation, synchronizing the processes and scaling the solutions to transform the inline interdiction and operation system automation for RAM Quality and Operation Engineering sections.

Responsibilities:

• Establish and improve BKM (Best Known Method) for RAM quality defense line, sampling methodology, sampling systems and operation efficiency.
• Improve quality and yield performance by reducing defect OOC% variation.
• Keen to learn new skills, initiate proactive and continuous improvement projects, in areas across the Front-End including manufacturing methods and processes, quality, software systems, cycle time, key tool metrics (utilization, and performance efficiency), maintenance and routine tasks, and other manufacturing support operation.
• Establish metrics that can efficiently audit adoption rate and compliance to business process, BKM and strategy and perform audits.
• Perform quality deviation investigations, fab metrics benchmarking analysis and find opportunity for improvements.
• Lead and facilitate discussion to drive network alignment on strategy business process and roadmap to achieve area objectives and deliver to timelines/commitments. Ensure BKM sharing spans across all sites regardless of technology and/or site mission differences.
• Actively provide recommendations to improve and optimize programs and processes to the respective program and/or process owners.
• Provide tactical support and coordination for the Fabs for issues of People, Safety, Yield, Quality, Cost, and Cycle Time when required.

Qualifications & Skills:

• Good communication skill, maintain a strong and open relationship with peer group and appropriate team members in other functional areas such as Process Integration Engineering, Quality Systems, Production Operations Management and present strategy and updates to network members and leaders.
• Proficient in project management with good resource planning, status monitoring and deliver timely results.
• Promote worldwide sharing and transfer of area-specific knowledge.
• Proficiency, experience, and knowledge relating to product and test wafer capacity modeling, wafer at risk modeling, Failure Mode Effect Analysis (FMEA) concept and system, defect analysis tools, sampling strategy and systems, Statistical Process Control (SPC) tools, Cycle Time Management, tableau creation, SQL and Programming language and Organizational Change have advantage.

Education and Experience:

• Masters/bachelor’s in engineering
• Relevant working experiences in RDA and/or Metrology
• Willing and capable of international travel, including Extended International Business Travel (EIBT) assignment to 6 months as needed, to accomplish the goals.

Maximizes yield by working on tools, the process, or wafer fabrication recipes. Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations. Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications. Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

Job Description
As a Design Engineer, you will report to the Senior Design Engineer and be responsible for the successful implementation and management of BIM processes in the construction field, specifically focusing on Building Services, Airconditioning, and Mechanical (M&E, ACMV) works. You will collaborate closely with the design department to ensure compliance with engineering and safety requirements and coordinate with stakeholders to maintain the integrity and accuracy of the BIM model throughout the project lifecycle.

Key Responsibilities

1. Construct and manage Building Information Models (BIM) with precision, ensuring the integrity and accuracy of all models. Ensure timely coordination and completion of tasks as assigned by the immediate superior.
2. Ensure all BIM models comply with project specifications and requirements.
3. Maintain and update the model library for all ongoing projects, ensuring that all data remains secure and is treated as company property.
4. Collaborate with project teams to collect site information for updating project BIM models.
5. Work closely with the Quantity Surveying department to provide drawings and information required for tendering, cost estimation, monitoring, and scheduling.
6. Coordinate with the BIM department to validate and confirm the accuracy of BIM designs.
7. Maintain, update, and manage hardware and software essential for the operation of BIM.
8. Assist in the creation of 2D AutoCAD drawings and ensure seamless integration between 2D and BIM models, bridging the gap between office and site operations.
9. Ensure all work conforms to the company’s ISO standards.
10. Support the submission of Operation, Maintenance, and Monitoring (OMM) manuals and media presentations using BIM models.
11. Follow the company's responsibility and authority matrix in the execution of duties.
12. Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes and standards, such as Singapore Code of Practice (CP13), SS553, and the Fire Code.
13. Utilize design software to perform thermal load calculations, energy modelling, and system sizing.
14. Prepare design documents including system layouts, schematics, and specifications.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills:Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage. Inexperienced candidates must be willing to learn, with training provided.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Your primary responsibilities will be:

• Risk assessment of NAND cell reliability, identification of the process/trim/test strategy to bridge the gaps for JEDEC and internal product qualification.
• Design experiments to identify and segment the limiting reliability mechanisms impacting NAND quality.
• Design high volume electrical experiments (both wafer level and component level) and perform statistical data analysis to validate process/trims solutions required to close reliability gaps.
• Update management and provide continuous feedback to process development and product engineers on the NAND reliability status and roadmap to bridge gaps.
• Contribute to develop forward looking technology path finding for next NAND generation, including reliability risk assessment and product capability projections, identify innovative design and product features required to meet quality specification.

Required skills:

• Proven experience with NAND device structures, operations and algorithms
• Knowledge and understanding of electrical properties of semiconductor and insulator materials, semiconductor device physics and solid-state physics
• In-depth understanding of physics-based modeling of non-volatile memory and semiconductor devices failure mechanisms, reliability analysis
• Knowledge and understanding of statistical analysis and numerical computing software (Matlab, Octave, JMP)
• Knowledge and ability of scripting languages (C, C++, Matlab, Perl)
• Familiar with Big Data and database queries
• Knowledge of JEDEC standards

Working location:

• 1, North Coast Drive, Singapore 757432

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

FE Central Product Integration Engineering (CPIE) HPM PI Engineer

As FE CPIE HPM (High Performance Memory) PI Engineer at Micron Technology, Inc., you will be responsible for working with global Micron network to drive HPM Product yield, quality improvement, new product introduction (NPI) through technical expertise, business process management and project execution.

Responsibilities and Tasks

• Promote worldwide synergy for improved benchmark performance and efficiency gains through global project management and execution, network BKM leveraging and enhancement, and business process creation and re-engineering.
• Active engagement with PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow in a timely manner to achieve BIC yield performance.
• Maintain and enhance domain knowledge and technical expertise, explore innovation opportunities with strategic thinking and systematic approach.
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Fab, TD, Product Engineering, GQ. Communicate and respond to issues in a timely manner. Help drive to fix the issue where necessary.
• Demonstrate ability to give effective presentations to both small and large groups on project updates and new initiative proposals.
• Periodically follow up with manager to ensure all type of goals are met and get assistance to remove obstacles.
• Travel to Micron Fab locations as necessary for face-to-face collaboration for program requirements.

Requirements

• Background in electrical engineering, materials science, transistor physics and semiconductor process knowledge.
• Experience with Semiconductor Device Physics, DRAM operations, wafer fabrication process flows, parametric/electrical test, and probe yield will be an added benefit to this position.
• Good data analysis, troubleshoot, problem solving, reporting and presentation skills.
• Good multi-tasking, verbal, and written communication skills.
• Strong interpersonal skills and customer/co-worker relationships. Successfully demonstrated teamwork skills with a strong focus on developing good team dynamics.
• Good organizational capabilities and ability to work effectively with minimal supervision.
• Intermediate to advanced PC skills including Microsoft Office.
• Ability to be flexible with job responsibilities and take the initiative to assume added responsibilities.
• Travel Required: Yes. Willing to travel as needed to support department goals
• Travel Frequency: 20-50%.

Education

• Bachelor’s degree and above in Electrical Engineering, Microelectronics, Physics, Chemistry, Materials Science or related field of study

Responsibilities:

• Prepare Product / Architectural / Mechanical drawings with AutoCAD / Solidworks.
• Work within stated procedures to ensure that design records/controls are maintained.
• Provide product technical support to customers / suppliers.
• Ensure Supplier’s Quality meet our Quality Standard.
• To Initiate / propose / participate in Quality Improvement.
• Take part in new product development.
• Other ad-hoc job assigned by the supervisor.

Requirements:

• Min Degree in Mechanical/Engineering or equivalent.
• Good understanding of Precision machining processes.
• Well versed with manufacturing process & good understanding of material specifications common to Ironmongery industry.
• Minimum 3 to 4 years experience in mechanical field or Ironmongery industry.
• Required language(s): English, Mandarin (to liaise with 90% Mandarin speaking customers - majority, and suppliers in regard to technical support).
• Well verse in Solidworks & AutoCAD Software.
• Responsible, mature, independent with a positive attitude and willingness to learn.

Additional Information

• Office Location: 141 Woodlands Industrial Park E 5, Woodland E-Terrace Singapore 757507.
• Working Hours: Mondays to Fridays (8:30am to 5:30pm), Alternative Saturdays (8:30am to 1:30pm)

For immediate consideration, please indicate the following information in your resume:

(a) Current and expected salary

(b) Earliest available date to commence work

Please note that qualified applicants who are immediately available will be given priority, and we regret that only shortlisted applicants will be notified.

As a Senior- level Device Engineer in Micron's Front End Central Process Integration Engineering (cPIE) team, you will co-work with the global Micron network on improving Device performance to meet product yield and quality requirements, through optimizing process steps, reducing device variability, optimizing design layout or test specs, and standardizing device engineering business process and working methodology. The primary focus could be either DRAM or NAND flash memory when needed.

Requirements:

• Bachelor's degree with a minimum 5 years of relevant working experience is required. Master's or Ph.D. degree in Physics or Engineering areas is preferred.
• Working experience in fab process or process integration or test engineering. Direct experience in CMOS or NAND/DRAM memory device engineering is preferable.
• Require proven knowledge in semiconductor physics and understanding of transistor operations, scaling limitations and reliability, basic knowledge of CMOS circuits and characterization methods. Experience in advance transistor architectures such as High-K metal gate or FinFET or GAA is preferred.
• Deep understanding of at least one semiconductor fabrication process area, including tool sets, process mechanism, tuning knobs, etc.
• Excellent data analysis skills using at least one software (JMP, SPOTFIRE, etc).
• Strong task ownership, self-motivated to work with other team members to make progress collaboratively.
• Open-minded attitude to learn new skills and could adapt to new working environment swiftly.
• Good communication skills. Proficient in English (speaking and written). Working-level communication capability in Mandarin Chinese OR Japanese is preferred.
• Good digital literacy with MS office. Programming capability such as Python is a plus.
• Occasional domestic and international business travel is required.

Job responsibility:

cPIE Device Engineer, responsible for product yield and quality improvement, by working collaboratively with Micron global network, to improve device performance, standardize business procedure and working methodology.