· Responsible for all conceptual design, mechanical design, cost control, fabrication parts and BOM generation of automated equipment.

· Support RFQ proposal, documentation for manual, ECN, work instruction, specification and test plan.

· Responsible for project co-ordinating and project timeline control

· Good knowledge of using solid works 3D cad software a must.

· Knowledge in motor, pneumatic component, sensors and LM parts selection.

· Minimum 2 year of working experience

· At least a Diploma or ITE in Mechanical/Mechantronic

- Willing to work under the sun and overtime, weekend or holiday, shift switching and able to work under pressure and condition such as not afraid of dirty, not afraid of tired.

- Willing to work as a Construction worker, can do the timber, rebar job, able to work at project site, structural work.

- Able to operate of machine, can use construction machine, knowledge of construction safety. Experience in operating equipment like trench rammers, drills, pneumatic hammers. Knowledge of mixing and pouring construction material (concrete, sand, grout & etc...).

- At least 10 years of experience in construction industry. Manage site activities, vendors and sub-contractors，assist the Project Manager in the daily execution of work. Attend meeting, coordination, prepare works schedule & site supervision.

- Ensure installation is carried out as per construction drawings & ensure that works are executed within an acceptable standard of workmanship.

- Responsible for all aspects of site safety, proven experience as construction worker, reduce material wasting and cost saving.

- Knowledge of basic engineering and construction principles and methods, be bilingual, fluent in English & Chinese / Bangladesh.

- Any other assigned duties.

Job Description

• Engineer, design and deliver grid connected or standalone solar photovoltaic systems (rooftop, ground mounted and floating arrays) on time and within budget.
• Prepare PVsyst report and manage proposals and bidding process for obtaining and delivering these services, including preparation of bill of materials (BOM) for project.
• Review solar system engineering designs, modeling, performance data, PVsyst report and provide engineering support during the construction process.
• Review the costs of structural estimates, interconnection, permitting agreements, production estimates, and assessment of commercial risk factors.
• Provide and/or review final bids, proposals, and RFIs, and provide support during construction and commissioning.
• Maintain design and proposal requirements, knowledge of codes and standards, design procedures, methods and process, improve efficiency of project development and project selection process.
• Selection of suitable equipment and components such as inverters, PV panels, switch bords etc.

Qualification Requirements

• Candidate possesses at least a Diploma in Building Services Engineering, Green Building & Sustainability, Intelligent Building Technology or Green Building Technology or Electrical Engineering.
• Minimum 2 years of relevant experience.

Preferred Skills

• Ability to design PV systems 415/400/230V power levels.
• Has knowledge in PVSYST, AutoCAD, BIM modeling and electrical design concepts.
• Aware of safety and standard requirements from local authority.

Position Summary

This position is involved in Supplier Quality activities that improve, monitor and measure Illumina’s compliance with the Quality System Regulations, Illumina Quality policies, FDA regulations and ISO standards as well as Illumina product quality for current operation and compliance objectives.

Responsibilities:

• Support qualification of new Suppliers and Partners for materials and services including risk assessments, audits and other supplier on-boarding activities
• Provide support to investigation teams in determining root causes on material quality issues and initiate/ensure corrective and preventive action plans are developed and executed
• Interface with Suppliers/CM (Contract Manufacturer), Engineering / Manufacturing / Quality Assurance / Procurement departments to drive for quality improvements, specifically on incoming rejects, workmanship defects and primitive failures
• Participate in Quality review activities with supplier/CM to identify improvement opportunities to meet quality expectation
• Compile, evaluate and report on supplier/CM quality performance metrics for scorecard and monitoring
• Monitor to ensure supplier’s preventive and corrective actions are implemented and effective
• Participate with NPI team in selection of new suppliers

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Bachelor’s Degree in Engineering, Life Sciences, or related field with 1-3 years of relevant experience
• Experience in driving suppliers to improve quality performance
• Experience in conducting supplier audits
• Good understanding of FDA regulatory environment (CFR 820), 501k and ISO 13485 strongly preferred.
• Experience in medical device / pharmaceutical / IVD is preferred
• Developing basic knowledge of quality tools
• Beginner to intermediate experience with Microsoft tools and spreadsheets, charting, graphing tools and presentation tools.
• Experience with electronic production life (PLM), enterprise resource planning tools (SAP) and etc are preferred
• Experience with statistical analysis packages, eg, JMP, Minitab are preferred
• Detailed oriented, well organized and able to work independently and in teams.
• Good communication and collaboration skills
• Ability to travel as needed

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget

• Perform site planning, coordination and inspection that related to M&E and facilities

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget

• Perform site planning, coordination and inspection that related to M&E and facilities

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget

• Perform site planning, coordination and inspection that related to M&E and facilities

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

JOB TITLE

Product Engineer

DEPARTMENT

Engineering

ACCOUNTABILITY

Section Leader, Product Engineering

DIRECTLY RESPONSIBLE FOR

Nil

PURPOSE OF JOB

The incumbent will be responsible for the design change controls and product sustaining engineering initiatives. He / She shall ensure that the product designs are validated per customer requirements, including domestic and international regulatory standards.

Utilize technical, project and leadership skills in the development, improvement and optimization of critical care products such as transducers and catheters. Apply technical principles, theories and concepts, as well as problem solving capabilities to resolve product design issues. Maintain design history files, determine test methods requirements, design verification, perform failure mode effect analysis and implement product-related solutions that improves performance and/or quality, as well as address shelf life requirements.

Provide technical support for existing products with issues relating to regulatory compliance, customer complaints, process improvement and CAPA resolution.

Keep abreast of potential new technologies to enable the design of new materials and capabilities. Leverage existing technologies to advance our core businesses while supporting the development of new products.

JOB FUNCTION

• Participate in Product Engineering efforts to validate / verify product design per customer requirements.
• Manage cost of sustaining engineering projects assigned.
• Make timely reports of progress, noting deviations from time or cost plans or customer design requirements.
• Coordinate development efforts with packaging engineering, process engineering, and all other departments that participate in product development.
• In own field of scientific / engineering competence, maintain up-to-date familiarity with developments through attendance at professional meetings, literature and consultations.
• Assist in anticipating, answering and alleviating any customer dissatisfaction with a product.
• Support cost reduction programs and provide technical line support for existing product lines.
• Establish / maintain a base of knowledge of customer requirements through literature, customer visits, etc.
• Comply with all local, state, federal, and Merit safety regulations / policies / procedures.
• Comply with all quality policies / procedures / practices through consistent application of sound Quality Assurance principles.
• Other projects as assigned.

INTERACTION

• Internal communication with all levels of associates.
• External liaison with inter-companies, customers and vendors.

JOB SPECIFICATIONS

• Degree in Bio-Medical / Mechanical / Electrical Engineering.
• Minimum 3 years’ experience of product / process engineering in a medical device company or related industry.
• Experience in product design with thermoplastic knowledge, preferably in medical device industry, will be an advantage.
• Knowledge in CAD Design / SolidWorks and statistical methods.
• Excellent interpersonal and communication skills

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget

• Perform site planning, coordination and inspection that related to M&E and facilities

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Job Description & Requirement

• Assist and provide technical inputs/support in our R&D in establishing a quality product from concept stage to prototype completion including conducting tests, interpreting data, finding high-quality materials to use, and conducting research on various parts.
• Responsible for design & development of commercial vehicles focus on technical specification and performance of the vehicles and powertrain components as well as software used in the vehicles.
• Liaise with OEMs on technical issues and raise Technical Reports, Prepare Technical Instructions to address technical issues on our product.
• Prepare Assembly work instructions, Quality control instruction and Operation Manual of our product.
• Create & maintain accurate Manufacturing Bill of Materials, develop cost- estimates for manufacturing process hours.
• Prepare new product specifications and provide support on component installation as required.
• Manage workload with a positive attitude as a team player in a collaborative work environment.
• Manage Product costing & provide support to sales.
• Qualification and Experience
• Min Diploma/Bachelor in Mechanical Engineering.
• Minimum 4 years’ experience working in an Automotive, Manufacturing, Machine shop, assembly environment or similiar environment
• A thorough understanding of engineering design principles and material processing
• Experience in Bill of Materials from either the Automotive, Aerospace or Rail industries
• If you have considerable experience of the automotive industry in an engineering Release & Change environment is an advantage
• If you understand automotive terminology, familiar with vehicle systems & components and the sequence of build of a vehicle is an advantage
• Proficient with Microsoft Word, Excel, PowerPoint
• Familiar with ISO 9001 or TS 16949 Quality Management System
• Experience in ERP applications will be an added advantage.
• Familiar with Lean Manufacturing principles, including Continuous Improvements
• Good communication skills, highly efficient, passion for engineering.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally.
• Strict adherence to Micron Intellectual Property protection policy is a must.

Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcomed to apply.
• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport
• 2-3 years of experience in Semiconductor Equipment/Process development is preferable
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever!

We need someone who is passionate about detecting problems, making changes for the better, and seek out innovative ways in how predict device performance! We are an equal opportunity company who values of People, Innovation, Customer Focus, Tenacity and Collaboration.

As Yield Failure Analysis Engineer in Micron NAND Technology Integration (NTI) Singapore department, you will be responsible for providing yield analysis for next-generation Micron products. In this exciting role, you will become a domain expert on physical failure analysis methods for any given electrical failure! You will also participate in the identification and communication of yield issues, assist with the root cause analysis for process deviations, characterize, probe, parametric, and fabrication data to identify the sources of failures.

Your responsibilities will include, but are not limited to, the following:

Perform Failure analysis which includes conducting electrical characterization, perform electrical verification to confirm failures, and understanding PFA techniques available for de-processing failures

Drive failure analysis initiatives for the yield enhancement team. Create and deliver new methodologies, capabilities, and innovative ways for failure analysis de-processing failures

Participate in global meetings and present results to Product Development and Process Integrations teams

Collaborate with metrology and RDA team to re-define and validate inline detection capability

Assist and support the transfer documentation of layout/architecture fundamentals of new technology from R&D to manufacturing fab.

Understand and follow all health, safety, and environmental procedures and requirements.

Successful candidates for this position will have:

• Experience in the semiconductor industry in the areas of Process Integration, Yield Enhancement, Failure Analysis, Data Science, or Unit Process.
• In-depth knowledge and direct experience with nonvolatile memories
• Minimum 4 years of related work experience in yield analysis
• Good understanding of the process flow, and interaction of process and device.
• Poses theoretical and/or operational knowledge of scanning electron microscopes (SEM), focused ion beam (FIB), Transmission emission microscopes (TEM), and Elemental Analysis (EDS, EELS).
• Fluency in Python, JavaScript, C or C++ is Windows, Linux, JMP statistic software is desirable.
• Ability to be self-motivated and self-governing with confirmed ability to work in a demanding and dynamic environment.
• Solid analysis, communication and reporting abilities with demonstrated presentation abilities.

Education:

B.S., M.S., or Ph.D. in Electrical Engineering, Microelectronics, Materials Science, Chemical Engineering, Physics, or a related field. We also consider applicants with equivalent experience.

Job Summary

· To develop Motion Control Solutions and algorithm for precision stages and robotic applications

· To develop R&D product development integration with motion control solutions

· Evaluation of R&D product performance

Job Responsibilities

1. Development of Motion Control with complex motion profile requirement for jerk reduction, vibration control

and force control

2. Development of R&D products in accordance to motion control solutions

3. Technical review of motion control products, including controllers, drivers, encoders and any peripherals

4. Provide technical support for product range including motion controllers, PLC, HMI, motor drives, DDT motors

and actuators, encoders and robotic arms.

5. Diverse a vibration monitoring system for predictive maintenance investigation

People Requirements

1. PhD/Degree / Diploma in any Mechatronics, Electrical, Electronic, Control or relevant Engineering discipline

2. Familiar and knowledgeable in Closed-loop Control systems and precision engineering

3. Knowledgeable in control systems principles and electrical fundamentals

4. Programing in C#

5. Self-motivated and good communication skills

Keysight is the world's leading electronic measurement company, helping scientists and engineers address their toughest technical challenges with confidence through innovations in wireless, modular, and software solutions. Our employees leverage their insight and passion to deliver measurement solutions in wireless communications, aerospace and defense, and semiconductor markets with world-class platforms, software and consistent measurement science. This job will be part of the Communications Solutions Group, which is responsible for Keysight's portfolio in the Wireless Data Ecosystem, including wireless devices, operators, internet infrastructure, and Aerospace & Defense. Our software-centric solutions accelerate our customers' time to market and reduce their costs - giving them a competitive advantage in today's and tomorrow's technology waves.

Job Description

This position is for a full-time Software Engineer to join Keysight’s Quantum Engineering Solutions (QES) organization, which is responsible for producing world-leading solutions in quantum technologies, including quantum computing, quantum communications and quantum sensing. As a Solution Developer, you will be part of an R&D team and launch breakthrough software solutions to market. You will engage in every stage of our product development process, addressing intricate technical challenges in a customer-centric environment. Your role will focus on integrating open-source quantum computing software with quantum control systems, ensuring seamless execution of workflows in HPC and cloud environments. You will design and implement scalable cloud-based solutions for quantum workloads, collaborate with cross-functional teams to develop integration tools, and optimize HPC workflows for distributed quantum computing operations.

Job Responsibilities

• Integrate open-source quantum computing software with quantum control systems to enable seamless execution of experiments and workflows in cloud environments.
• Design and implement scalable cloud-based solutions for quantum computing workloads, ensuring high performance and efficient resource utilization.
• Collaborate with cross-functional teams to develop APIs, libraries, and tools that enhance the integration of quantum software and control systems.
• Work closely with technology teams in an Agile environment to integrate cloud services and optimize operational efficiency.
• Ensure best practices in cloud operations, establish key performance indicators, and develop and enforce cloud security and compliance measures.

Job Qualifications

• BS/MS in Computer Science, Computer Engineering, or equivalent.
• Over 5 years of experience, including leading cloud platforms in public cloud environments.
• Strong experience with High Performance Computing (HPC) and cloud platforms, including deploying and optimizing distributed computing workflows for high-performance applications.
• Proficiency in Python, C#, C++, JavaScript, and other modern programming languages (e.g., Golang, Julia).
• Experience in integrating complex software systems, including APIs, libraries, and tools, with a focus on performance, scalability, and reliability.
• Proven experience as a Cloud Engineer.
• Good knowledge of DevOps practices.
• Familiarity with cloud security, compliance, and cost management.
• Good understanding of quantum information science is desired but not mandatory.
• Excellent analytical and troubleshooting skills.
• Ability to work in a collaborative environment and to develop teamwork among individuals and over geographically disperse teams.
• High tolerance for ambiguity, results-oriented, meets timelines, handles pressure while working positively in a collaborative manner.
• Excellent written and verbal communication skills
• Willingness to learn proactively.

An ACMV (Air Conditioning & Mechanical Ventilation) Installation Site Coordinator plays a crucial role in overseeing and coordinating the installation of ACMV. Their duties and responsibilities are focus on ensuring the project is completed efficiently, safely, and within budget. Detailed breakdown of their responsibilities shall be as below and but not limited to:

1. Project Planning & Scheduling

• Work Scheduling: Coordinate and schedule all activities related to the installation of ACMV systems, ensuring that work is carried out according to the project timeline.
• Resource Allocation: Ensure that manpower, materials, and equipment are available as per project needs and schedules.
• Coordination with Contractors: Collaborate with subcontractors, suppliers, and other vendors involved in the installation process to ensure timely delivery and work execution.

2. Site Supervision

• Site Setup: Oversee the setup of the installation site, ensuring that all necessary equipment and materials are in place.
• Installation Supervision: Monitor the installation of ACMV systems such as ducting, piping, chillers, AHUs (Air Handling Units), FCUs (Fan Coil Units), BMS system, ESCS system, Jet Fan system and other components.
• Safety Compliance: Ensure that the installation is carried out according to safety regulations and that all team members are adhering to safety protocols (e.g., wearing PPE, following safety guidelines).
• Quality Control: Supervise the installation process to ensure that the work is completed to the required quality standards and complies with the project specifications and drawings.

3. Technical Support & Problem Solving

• Troubleshooting: Identify and resolve technical /site issues, constraint that arise during installation, working closely with engineers and technicians to provide solutions.
• Technical Assistance: Provide on-site technical support to ensure the correct assembly and installation of ACMV systems as per the design specifications.
• Adjustment & Modification: Recommend and implement necessary adjustments or modifications during the installation process to address unforeseen issues or improve efficiency.

4. Liaison with Stakeholders

• Client Interaction: Act as the main point of contact between the client and the project team, ensuring that the client's requirements and expectations are met.
• Coordination with Engineers: Work closely with Supervisor, Engineers, Designers, BIM team and Project Manager to ensure the installation meets design specifications and standards.
• Reporting: Provide regular progress updates and reports to Project Managers, Site engineers, and other relevant stakeholders.

5. Documentation and Reporting

• Project Documentation: Maintain accurate records of installation activities, including daily site reports, inspection reports, and material usage logs.
• Variation Management: Track and document any changes or variations to the project scope and ensure they are communicated to the relevant stakeholders.
• Site Meetings: Attend regular site meetings to review progress, discuss challenges, and plan the next phase of work.

6. Inspection & Testing

• Inspection of Installation: Ensure all installed systems and equipment are properly inspected for compliance with design and installation standards.
• Pre-commissioning Tests: Coordinate pre-commissioning tests, including leak testing of ductwork and piping, to verify the systems' integrity and performance. ACMV RI and TOP items inspection preparation and check before RI and TOP inspections.
• Final Commissioning: Assist in the commissioning of ACMV systems, ensuring that all testing, balancing, and adjustments are completed before handing over to the client.

7. Health, Safety, and Environmental Compliance

• Safety Training: Conduct safety briefings and ensure all workers are trained in safety practices specific to ACMV installation.
• Environmental Compliance: Ensure that installation practices are environmentally friendly, reducing wastage, managing emissions, and recycling materials where possible.
• Risk Assessment: Conduct risk assessments to identify and mitigate potential hazards on-site.
• Site Attendance: To attend everyday morning exercise and tool box meeting as per main con scheduled timing, conduct site walk to check and monitor site progress and arrange subcon workers and direct workers for necessary work to carry out.
• Permit Application: Apply Permit to Work (PTW) and other necessary permit such as Work at height, hot work, confined space, etc via main con NOVADE application platform.

8. Coordination of Multiple Trades

• Interfacing with Other Trades: Coordinate with other trade contractors (electrical, plumbing, civil) to ensure smooth progress and avoid conflicts between work activities.
• Sequencing Work: Ensure that ACMV installation is sequenced properly in relation to other trades and that all work is integrated effectively within the overall project.

9. Cost Control

• Material Management: Monitor material usage and inventory to avoid wastage and overstocking.

10. Post-Installation Support

• System Handover: Participate in the handover process, ensuring all necessary documentation and manuals are provided to the client.
• Defect Rectification: Oversee the rectification of any defects found after installation, ensuring they are addressed in a timely manner.

11. Training and Mentoring

• Team Training: Ensure the installation team is well-trained in the latest ACMV technologies, tools, and safety procedures.
• Mentorship: Provide guidance to junior staff and technicians on technical aspects and best practices of installation.

In summary, the ACMV Installation Site Coordinator is responsible for overseeing the complete installation process, from planning to execution and final handover, ensuring that everything runs smoothly, safely, and according to specifications. They serve as a central point of coordination between the project management team, contractors, engineers, and clients.

Requirements:

- Diploma or above in mechanical engineering or related qualifications

- Min 2 years on site experience

- Experience in BIM is an added advantage

- Strong independence and good communication in English

- Able to work 5.5 days week

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

This is an exciting and fast-paced position! Our team Application Development & Support(ADS) delivers software solutions to leadership and engineers throughout Micron's global manufacturing network. As Operations Central Team (OCT) Software Development Engineer at Micron Technology, Inc., we have the chance to create and improve Micron systems and processes on a global scale.

Collaborate with customers across departments and geographical sites to design, develop, innovate and support software throughout the development life cycle. Be part of the team to support efficient business processes by maintaining a focus on global alignment, and participating in efforts to research and influence technology roadmaps.

Responsibilities:

• Demonstrate Micron core values People, Innovation, Tenacity, Collaboration, and Customer Focus
• Gather requirements by working closely with customers
• Design, develop, debug, document, test, and deploy applications
• Collaborating with other developers on the team
• Working closely with Business Operation Teams, Product and Application Development teams, and other internal customers during application development and deployment
• Provides 24x7 Support

Project Description

• Join an agile team to develop a web solution for Micron globally, including but not limited to API, ETL, and database projects.
• Work on new or existing projects.

Learning Outcomes

• Gain hands-on development experience in modern tools and pioneering tech stacks (Angular, OpenShift, Azure)
• Learn to work effectively in the Agile development team to develop successful product with timely delivery
• Gain domain knowledge on semiconductor industry
• Develop problem-solving and analytical skills and good software engineering practices
• Enhance communications, interpersonal, and other critical skills in the professional environments

Qualifications and Traits

• Proficient in Angular, .NET Core, C#, and SQL.
• Knowledge of containerized deployment with Docker, Kubernetes, and OpenShift is a plus.
• Strong analytical, problem-solving, and interpersonal skills.
• Motivated to work in a dynamic and fast-paced environment.
• Ambitious and driven to complete tasks independently while recognizing ways to improve processes.
• Active team participation, partnership, and consensus-building skills.
• Good verbal and written communication skills.

Education Required

Bachelors Degree or equivalent experience in Computer Science or related field of study

Experience Required

2 years of experience in 3 or more of the following:

• Experience in front-end web development (preferably Angular, ASP.NET)
• Proficiency in C# and Object Oriented Programming
• Proficiency in HTML, CSS, JavaScript
• Experience in RESTful Web API development (preferably ASP.NET Core, Node.js)
• Experience with Agile development methodologies
• Good understanding of one or more database technologies (MSSQL, ORACLE, Snowflake, MongoDB, CouchDB)
• Experience in SSIS, SSRS, Tableau, PowerBI or any Business Intelligence technologies Bonus if you have experience in Python and cloud programming, CICD (Azure), NiFi
• Knowledge of source code repositories (Git)
• Knowledge of SQA is a bonus

Assisting the Support Engineer or Software Engineer in problem resolution beyond the capability of the 1st Level Support Staff.

• Performing system recovery if needed.

• Escalating unsolvable problems to the 3rd Level Support Staff and reports the escalation to superior.

• Ensuring that the System runs according to contractual specifications after problem resolution.

• Providing advice on system / database performance monitoring and tuning.

• Ensuring deployments of approved patches/releases are implemented accordingly to Change Request.

• Complete all Service Requested accordingly to SLA timeframe.

• Assisting the Customer in the verification, isolation and/or provision of a temporary work-around for the problem logged beyond 2nd Level Support Staff capability.

• Escalating unsolvable system problems and service request to the OEM/Vendor for technical support.

• Coordinating system development tasks to include design, integration and formal testing on the Change Request.

• Overseeing all transitions into production on the Change Request.

• Developing and complete actions in system specifications, technical and logistical requirements and other disciplines on the Change Request.

• Creating and maintain programmatic and technical documentation to insure efficient planning and execution on the Change Request.

• Managing and document system configurations on the Change Request.

• Perform troubleshooting and resolve incident based on SLA.

• Generating the relevant administrative records and reports.

Position Summary

Responsible for new product introduction Production Tooling Development, and production support engineering for a specific product or group of products after transfer from design to in-house or outsourced production. Interfaces with design, process, test, reliability and manufacturing engineering to solve product issues and production problems. Develops and sustains process improvements to reduce production costs and increase yields.

Position Responsibilities:

• Support and drive production tooling development activities during NPI and sustaining phases.
• Support and drive activities to ensure successful product transfer into manufacturing.
• Drive troubleshooting, failure analysis, root cause analysis, issues closure and corrective action processes as required.
• Establish and maintain databases of Production Tooling.
• Perform data trending analysis, construct and execute design of experiments to address yield and quality issues.
• Drive and implement process improvements and product sustaining activities to meet the production goals.
• Drive maintenance and improvement activities on test fixtures and equipment.
• Drive and implement cost reduction activities by perform engineering evaluation to qualify new or improved materials, processes and products.
• Apply various analysis techniques, such as FMEA and statistical analysis to optimize product quality and minimize cost, providing all calculations, performance data, and drawings required on new and existing products.
• Manage and coordinate Engineering Change Order implementation activities including scrap analysis, material disposition, update work instructions and test requirement changes.
• Documentation responsibilities include, but not limited to, generating detailed engineering drawings, Bill of Materials, test reports, assembly procedures and design validation plans.
• Work closely with contract manufacturing partners and key suppliers to ensure smooth transition of quality products from development into manufacturing.
• Applies basic problem-solving techniques to define and resolve routine issues.
• Determines a course of action based on guidelines.
• Works on assignments of limited scope where answers can be readily obtained and problem solving requires following standard practices/procedures.
• Develops working relationships internally.
• Exchanges standard/basic information with colleagues, immediate supervisor, project leaders and other professionals in the team/group.

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements (Experience/Education/Skills):

• Bachelor’s Degree or Masters in Mechanical or Electro-Mechanical Engineering

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills:

• Typically requires a minimum of 2 years of related experience with a Bachelor’s Degree; or 1 year and a Masters degree; or a PhD without experience; or equivalent work experience.
• 2+ years of engineering experience in mechanical or electro-mechanical based products for commercial and industrial markets.
• Good working knowledge and experience in enclosure and chassis, structure, mechanism design and electro-mechanical systems.
• Strong organizational skills, attention to detail and accuracy, and the ability to work independently in a team environment are essential.
• Solid knowledge of GD&T, plastic & sheet metal tooling, casting, mechanism, stress analysis, mechanics, machining and standard manufacturing processes.
• Candidate must be able to effectively work together as a team, interface well with the manufacturing and service organization, and has a proven track record of transferring products to manufacturing.
• Must possess good analytical and troubleshooting skills.
• Proficient in engineering tools such as, statistical analysis, design of experiments, product and process capability analysis.
• Proficient in Solidworks or 3D CAD tools.
• Good working knowledge of BOM (Bill-Of-Material) structuring fundamentals and have the ability to create ECOs (Engineering Change Order) and Deviations.
• Demonstrated use and understanding of MRP systems, Product Data Management systems and Change Control processes. SAP & PLM experience will be added advantage.
• Experience with FDA regulated medical device product development preferred.
• Product development experience in the life sciences, biotech, biomedical, nanotechnology or semiconductor industries preferred.

The intern will work in the Production department of Keystone Cable factory. He will report to the Plant Manager (mentor) and work alongside engineers / technicians to identify opportunities for factory operations efficiency and productivity improvement.

Expected tasks / responsibilities

1. Job shadow / On-job training, OJT of Production Engineer to understand cable manufacturing process.
2. Problem understanding of current methods of manual production data collection with the intent of improving the process flow and to digitize where possible.
3. Data acquisition of shop floor data to set baseline targets for production improvement
4. Research and testing of hypothesis on production parameters we want to improve
5. Project management of one or two projects to improve factory productivity / efficiency using existing or acquired skillsets.

Learning outcomes and objectives

1. To allow intern to gain a good understanding of the work and responsibilities of a production engineer in a factory.
2. To project manage one or two projects that tackle factory productivity and efficiency problem statements.
3. To apply and extend intern’s skillsets on shop floor data collection and analysis with the objective of improving existing factory systems.
4. To allow company and intern to assess compatibility for potential collaboration opportunities in the future.

Requirements

Personal traits requirements: Respect for individual, Team player, Good communication skills, Willing to accept new challenges and learn.

Technical requirements: Industrial control and automation, Power systems, PLC systems, Basic programming skills will be a plus: Python, SQL database. MS Office proficiency

*Kindly indicate the period you are able to commit to the internship in resume

*Only available for internship period beyond August

• Preventive and corrective maintenance of Building Management System, Energy management System
• Development of Functional Design Specifications, Software Design Specifications, Control Schematics/Write-up and other software/test documentation.
• Handle application programme change management, hardware deployment management & documentation
• Implantation of PLC/SCADA project from concept to design and programming
• Site Testing and Commissioning with clients.
• Interface design, implementation and testing between various third-party systems
• Meeting with clients, reports and documentation
• Capable of performing troubleshooting independently
• Implement improvement works to clients.

Requirement:

• Diploma or Degree in Engineering (Electrical/ Electronics/ Automation / Building Technology).
• Experience in interfacing design, implementation and testing between various third-party systems using Modbus, BACNet or other protocols will be an advantage.
• 2 years’ working experience in building ACMV systems / PLC related experience.
• Must have Mitsubishi PLC programming experience
• Knowledge of SCADA (Niagara N4 or Mitsubishi MC Works) is an advantage.
• Have worked with Building Management System/SCADA/HVAC system is an advantage.
• A resourceful individual with good organization, time management and problem-solving skills.
• A team player and at the same time able to work independently in a fast-paced environment.
• Able to work during weekends or night jobs occasionally when required.
• Competitive remuneration package will be offered to the shortlisted candidate.

Job Description

1. To study Tender documents and drawings / To summarize the Tender requirements
2. To plan the work sequence and identify cost item
3. To prepare Tender submission (Document, Schedule and Cost)
4. To figure out the risk of tender

Job Requirements

1. Experience in the Civil / Infrastructure Project Site (as a Site Engineer or Quantity surveyor)
2. Experience in the Tender preparation on Civil / Infrastructure Tender.

Job Overview:

• Report directly to the Project Manager, managing ACMV works within the built environment.
• Ensure project management aligns with engineering and contractual requirements.
• Collaborate with the design department to ensure compliance with engineering and safety standards.
• Oversee contracts, costs, schedules, coordination, and overall project completion.

Key Responsibilities:

1. Manage projects from concept to completion, including planning, scheduling, budgeting, and stakeholder coordination.
2. Implement and oversee Project Quality Plan, Safety Management Plan, and Building Execution Plan.
3. Develop, maintain, and manage the BIM model and project documentation (drawings, specifications, reports).
4. Liaise with clients to meet their requirements and ensure project scope, schedule, and budget compliance.
5. Address and resolve technical or contractual issues during the project lifecycle.
6. Oversee the construction process to ensure timely, budget-compliant, and high-quality completion.
7. Coordinate with consultants, contractors, and ensure contractor performance.
8. Manage project handover to the client, ensuring compliance with all relevant Singapore regulations and standards.
9. Promote and manage safety activities and compliance inspections.
10. Obtain necessary permits and approvals and work with authorities to minimize public disruption during construction.
11. Ensure sustainability and environmental friendliness of the project.

Preferred Experience:

• Experience in healthcare facilities (hospitals, labs, operating theatres).
• Experience in commercial or industrial buildings (warehouses, factories).
• Experience with government projects and data centers.

Requirements:

• Degree in Mechanical Engineering, Building Services, Project Management, or a related field, with ACMV project experience preferred.
• Graduates with a degree in Sustainable Infrastructure are encouraged to apply.
• Bizsafe Level 2 safety certification or higher preferred.
• Minimum 3 years of experience in related fields preferred, though fresh graduates are welcome to apply.
• Proficiency in English (written and spoken).
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM and a valid driver's license are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

• Job Description

1. Preparing, scheduling,coordinationg and monitoring the assigned BMS project
2. Prepare all the layout drawing, shop drawing, as bult drawing for the BMS project
3. Famillar in BACNET, MOBUS TCP,MODBUS MSTP protocal for BMS systemm
4. Able to interface modbus devices such as power meter,water meter, Themostat,HMI,and much more for the BMS system
5. On-site testing and commissioning of sensurs or meters
6. BMS programming development, Graphical user interface (GUI) for the BMS
7. Experience for onsite equipment trobleshooting
8. Able to do termination for the DDC controller

• Requirements

1. Diploma or Degree in Engineering (Electrical/ Electronics/ Automation / Building Technology).
2. Knowledge of SCADA (Niagara N4 or Mitsubishi MC Works) is preferred
3. At least 1-2 years of working experience in the related fileld is required for this position
4. Proficient in Microsoft office
5. Rquired language: Chines,English (in order to communicate with the engish & chinese speaking counterparts

Job Responsibilities:

• Support the Survitec global infrastructure - acting as a technical escalation point and collaboration source to our partners and vendors
• Play a key role and provide support to ongoing major programs including Network and Cloud migrations.
• Ensure that all systems are performing at optimal levels, liaising with external service providers where necessary.
• Monitoring and maintenance of the security, integrity and performance of core systems and backup services
• Compliance reporting and remediations
• Work collaboratively with the Architecture & Security teams offering input on solution designs where appropriate.
• Assist with planning and delivery of infrastructure improvements as part of a team
• Working closely with our Vendors and outsourcing partners to provide input and continuously improve service.

Job Requirements:

• Strong background in cloud computing and Azure technologies including Azure IaaS, SaaS & PaaS
• Strong working knowledge across the MS Stack including the Windows OS Family, Active Directory (hybrid), Exchange, Office, scripting and endpoint management (Intune & SCCM).
• Experience designing and implementing scalable, secure, and highly available cloud solutions
• Ability to troubleshoot and resolve issues related to Azure environments.
• Ability to troubleshoot and resolve hardware, software, network, and system issues.
• Assisting with IT projects, such as system upgrades, migrations, backups
• Excellent communication and collaboration skills
• Demonstrated ability to work effectively in a team environment
• ITIL certification or experience.

Desirable Criteria:

• Understanding in key infrastructure processes including capacity management, patch management, change management and performance reporting
• Network management including LAN & WAN technologies
• Outsourced Supplier management
• Experience of Service management desirable
• Experience ins supporting or implementing IT Security standards such as ISO27001, CE+, PCI-DSS