We are an M&E Firm located in Woodlands

Job Description

• To report to project manager and to oversee implementation of projects.
• Review and check drawings before installation.
• Raise material request, order material & handle direct manpower management.
• Liaise with Consultants, Main-contractor, Suppliers and Sub-contractors.
• Coordinate with Consultants, Architects and Authorities site inspections.
• To ensure adherence and implementation of O&SH measures at site.
• Manage multiple job sites, supervise and ensure works are following the contract specifications and authorities’ requirements.
• Able to work overtime including weekends and public holidays when required.

Requirements

· Diploma/ Degree or equivalent in Mechanical Engineering.

· Minimum 5 Years and above working experience in ACMV/ M&E engineering is required for this position.

· Good interpersonal skills, self-driven, proactive and able to work independently with minimal supervision.

Working Hours

· 6 Days work week

Job Description

• Scope of Work: NPI (New Product Introduction) and mass production, for assigned product (module, sub-assembly, instrument level) for LCMS.
• Product Quality, Yield, and Cycle Time: Lead cross functional team to drive continuous product and quality performance improvement i.e. factory yield, DEFOA, warranty/Annual Failure Rate and production efficiency (yield and cycle time).
• Product Development: Collaborate with R&D in product development and validation, and provide engineering support. Works with R&D to design, develop and release new tools or process technologies and is a resource for risk assessments and design for manufacturability. Influencing the design of the product and/or process to ensure manufacturability leveraging global supply chain, enabling prototyping and run manufacturing and realiability test, scale-up, and manage prototype transition into production. Develop manufacturing and test for new product i.e. responsible for the development of product manufacturing process, assembly fixture/tooling and test system. Design test procedures to optimize test time and troubleshooting. Actively participate design reviews and provide input on electronic circuit designs and obsolescence re-design. Define manufacturing process and test and product test plans. Support and implement the transition of products and manufacturing processes from prototype to full production, and through the entire product life cycle.
• Product Sustenance: Performs a variety of engineering duties to support manufacturing operations. Provide technical support to day-to-day product issues and all product/manufacturing process related issues, which include customer quality issues, production line troubleshooting, product/part/process change validation, etc. Maintain & improve product quality. Redesign products/processes to meet cost objectives, obsolescence, and customer requirements. May be assigned as the technical leader to assist operating manager or as project lead for value engineering or CPE (current product engineering) projects, product/process improvement, product/process transfer, equipment and test enhancement, New Product Introduction.
• Process Improvement/Digitalization and Compliance, Lean Manufacturing: Ensure compliance to engineering change order (ECO) procedures and work instructions. Collaborate with R&D to transition design prototypes into cost-efficient, manufacturable (DFx) high-volume products. Implementing Lean Manufacturing principles within manufacturing. Design jig/fixtures for new product, to ensure product manufacturability. Utilizes digital solutions to optimize and maintain state of the art manufacturing processes.
• Supply Chain related: Collaborate with procurement and material engineering in the specification, sourcing and qualification of materials used in the design and production of Agilent products to meet quality, cost and manufacturability goals.
• Other tasks and responsibilities assigned by manager in support of business needs.

Qualifications

• Education: Bachelor's or Master's Degree or University Degree or equivalent in the field of Electrical & Electronic Engineering. Candidates with Mechanical, Mechatronic Engineering, Physics or Computer Science qualifications with strong product engineering experience are also encouraged to apply.
• Certifications: Relevant certifications can enhance your qualifications. Examples include ASQ, QC/QA, EMC, and EMI.
• Knowledge in 6Sigma / Engineering Statistics (PFMEA, SPC, DOE, Process Capability), Value Stream Mapping, Qualification of equipment and Process Validation would be added advantages.
• Skills: Knowledge of probability and statistics, board-level product qualification procedures, manufacturing processes, and familiarity with tools like Microsoft Office and pythons. Knowledge in designing test fixture and tools is added advantage.
• Experience: At least 5+ years relevant experience, especially in manufacturing environment of Mass spectrometry. Vacuum system, electronics and test is desirable. Process characterization and validation using tools such as Cp/Cpk, and Design of Experiments techniques have added advantage. Product test methodology, test software and tester development are advantageous.
• Passionate, innovative, systematic problem-solving and leading on continuous improvement. Self-starter and proven track record of results in setting, implementing complex engineering projects and achieving the goals and demonstrated levels of creativity.
• Must possess strong engineering and analytical skills. Ability to multitask, prioritize and work independently.
• Strong team player with good interpersonal skill and excellent collaboration, oral and written communication skills.

• You are responsible to drive and manage the silicon Bump & package assembly suppliers, backend processes and solutions to achieve the aggressive TQRDCEB goals.
• You will work closely with package design & technology, test & product engg, production planning, quality engg & NPI teams, assembly/substrate suppliers to support new product & technology introduction activities by defining processes, monitoring systems, manage process improvements and changes.
• Provide day-to-day support to bump and assembly suppliers & internal planning, product and test engineering teams.
• Plan, drive & implement improvement activities for continual improvement, 2nd sourcing, cost reduction & customer satisfaction.

Qualifications:

• PhD / Master / Degree in Mechanical / Electrical / Electronics Engineering with 7~12 years of relevant experience of managing advanced node silicon bumping, large body single & multi-chip (2.1/2.5/3D) package assembly, substrate & back-end suppliers and processes.
• Hands on experience in Product Life-Cycle Management - creating & maintaining Bill of Material structure, Process Documentation, Process Change Notification etc.
• Good team player, result oriented individual, experienced in project management, failure analysis tools, techniques and TQM. Good analytical, problem-solving skills. Flexible and agile.
• Sound knowledge of applicable industry standards, quality systems, regulations, knowledge of prevailing and emerging silicon package & substrate technologies, bumping and assembly processes, materials and equipment.
• Able to communicate with internal team members & external partners in various geographic locations and may required to travel from time to time at short notice.
• Experienced AutoCAD user. Knowledge of silicon & PCB fabrication, board assembly processes, are an added advantage

Job Responsibilities:

• Planning and scheduling of projects
• To manage M&E construction projects and to monitor the projects are carried out with respect to the target schedule
• To handle design for Electrical distribution System/lighting/power/PA System/solar/switchboard/transformer and to ensure clients' requirements are met
• To attend project meeting and to coordinate with clients, consultants, main contractors and sub contractors
• Preparation of Progress Claim, Materials Submission, Risk Assessment, Progress Report, Shop Drawings & As Built Drawings for projects
• To forecast and anticipate possible issue for projects and to eliminate potential risks
• Site supervision and to liaise with supervisors and workers to ensure smooth work flow
• Planning of manpower and work arrangement with site person in charge
• To liaise with suppliers on procurement and delivery of materials and equipment
• Preparation of Method of Statement, Risk Assessments for various installation works
• Assist in settlement of project final account including variation orders

Requirements:

• Candidate must possess at least Diploma/Bachelor's Degree/Post Graduate Diploma/Professional Degree in Mechanical Engineer
• Preferably Engineer specialized in Engineering - Electrical/Mechanical or equivalent
• At least 3 Year of working experience in the related field is required for this position
• Demonstrated expert experience in electrical System/Fluently in Auto Cad design /Microsoft
• Energetic, leadership, self motivated, good problem solving skills, positive attitude, good written and communication skills.
• Self initiative and positive thinker
• Committed on job assign

Position Summary

This position is involved in Supplier Quality activities that improve, monitor and measure Illumina’s compliance with the Quality System Regulations, Illumina Quality policies, FDA regulations and ISO standards as well as Illumina product quality for current operation and compliance objectives.

Position Responsibilities

· Support qualification of new Suppliers and Partners for materials and services including risk assessments, audits and other supplier on-boarding activities.

· Provide support to investigation teams in determining root causes on material quality issues and initiate/ensure corrective and preventive action plans are developed and executed.

· Interface with Suppliers/CM (Contract Manufacturer), Engineering/ Manufacturing/ Quality Assurance/ Procurement departments to drive for quality improvements, specifically on incoming rejects, workmanship defects and primitive failures.

· Participate in Quality review activities with supplier/CM to identify improvement opportunities to meet quality expectation.

· Constantly review quality processes and suggests improvements that can be implemented to improve performances.

· Support Supplier/CM development and risk management activities

· Compile, evaluate and report on supplier/CM quality performance metrics for scorecard and monitoring

· Monitor to ensure supplier’s preventive and corrective actions are implemented and effective

· Participate with NPI team in selection of new suppliers

· Other such duties that may be determined by Management

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements

· Experience in directly working with Contract Manufacturer/Suppliers

· Experience in conducting supplier audits.

· Developing basic knowledge of quality tools.

· Beginning to intermediate experience with Microsoft tools and spreadsheets, charting, graphing tools and presentation tools.

· May have experience with electronic production life (PLM), enterprise resource planning tools (SAP) and etc.

· May have experience with statistical analysis packages, eg, JMP, Minitab.

· Must be detailed oriented, well organized and able to work independently and in teams.

· Good communication and collaboration skills

· Ability to travel as needed

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills

· Good understanding of FDA regulatory environment (CFR 820), 501k and ISO 13485 strongly preferred.

· Experience in medical device/ pharmaceutical/ IVD is preferred.

· Typically requires a Bachelor’s Degree in Engineering, Life Sciences, or related field with 0-3 years of experience

• Attend site walk and prepare quotation
• Budget calculation and inquiry quotation from sub-contractor and supplier like material
• Tender documents preparation
• Biding proposal preparation and present
• Client relationship maintenance and marketing analysis
• And other ad-hoc duties as assigned

Job Requirement

• 3 years of experience as Sales Engineer or similar technical Sales role
• Preferably knowledge in semiconductor industry
• Pay attention to detail and a high degree of confidentiality
• Proficiency in Microsoft Office, especially Excel
• Good written and verbal communication skills
• Bilingual (English & Mandarin), able to read & write due to the document from HQ (Taiwan) is in Mandarin
• Candidate will be based at office (Ark@Gambas)

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND products.
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing CVD/PVD teams on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise R&D to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

Requirements

• Master degree or higher in Materials Science, Chemical/Microelectronic Engineering, or Physics with minimum 2 years hands-on experience in leading edge film deposition/CVD deposition/implant technology work.
• A deep understanding of chemical kinetics, thermodynamics, physical phenomena and their direct application to CVD/PVD deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise R&D for 4-6 months at a stretch to work on technology development.

Duties and Responsibilities
With reference to the Service Lead in AGRAMKOW Asia Pacific, you will be responsible for incoming customer requests, while showcasing your specialization within the technical field. You secure urgent support, maintenance advice and breakdown repairs when needed and work independently as well as collaboratively with your world-wide colleagues.

Your open-minded and helpful approach shines, especially during on-site customer visits, where you support and advise customers in any matter regarding maintenance of equipment, installation, or commissioning of machinery.

Skills and Experience

The right candidate for the job should be equipped with a relevant technical education, such as a degree in Electronics / Electrical / Mechatronics Engineering or similar.

In addition, the following will be required:

• A minimum of 2-3 years' experience in an industrial or automation-based project environment.
• Technically trained with ability to understand PI diagram, E-plan and mechanical drawings is a must.
• Practical electrical knowledge with ability to install equipment/instrument independently.
• Familiar with IoT4.0 concepts and IIOT implementation is a plus.
• Pre-sales experience preferred.
• Experience of the HVAC industry would be desirable, but not essential.
• Strong interpersonal and communicative skills.
• Team player with collaboration with people of all levels both within and outside of the company.
• Fluent communication skill in spoken and written English is essential. Proficient level of mandarin is an advantage.

The position is based in Singapore, and you will be supporting customers mainly within the Asia Pacific Region. Comprehensive, thorough training and needed education will be provided in Singapore and at our head office in Denmark.

What We Offer
We offer an exciting workplace, within a fast-growing industry, where we honor a positive mindset and find high collaboration as a natural part of the day. We foster a culture that values individual well-being and encourages a healthy work-life-balance. We support each other and embraces creativity. We offer opportunities for personal growth and professional development, that not only values your contributions, but also invests in your continuous development, making work an enjoyable journey.

We invite candidates for interview on an ongoing basis and close the position once we have found the right Candidate for the job.

AGRAMKOW

For more than four decades, AGRAMKOW has served manufacturers of refrigerators, freezers, and air-conditioning units all over the world. Based on our vast experience we provide reliable, high-quality, end-of-line solutions to help our customers establish a key edge in fiercely competitive markets.

From individual charging, evacuation, and testing stations to complete production line information systems that integrate operating data. Our customers count on AGRAMKOW to pave the way to data-driven production resulting in continuous quality and productivity improvements and better-informed decision-making.

At the heart of the AGRAMKOW's way of working our vision, is to be the most admired company in our industry for our applications expertise, partnership, productivity technologies and SMART solutions.

We are working across the globe, building partnerships to improve quality-based performance for customers. We provide local support wherever our products are installed, and have support centers in Asia, Europe and Latin America. In addition, we have an extensive network of alliance partners worldwide.

Always in the vanguard of new performance technologies, AGRAMKOW has continually pioneered within new solutions in response to the rapidly changing needs of the consumers within commercial appliance and air conditioning industries.

Job Description & Requirements

Responsibilities:

• Assembly, fitting, basic tool room machining, mould development, implementing process improvements for tool manufacturing and liaise with machining technician for process planning and scheduling of project.
• Discuss tooling drawing with Designer to ensure tooling design is meeting customer product requirement.
• Assemble, fitting and troubleshooting of tooling related issue.
• Fabricate tooling components and inserts according to tooling drawing.
• Liaise with Production Engineer for execution/planning on mould testing.
• Ensure tool manufacturing and trial meeting planned schedule.
• Initiate corrective action if first article or parts not meeting specification.
• Use various measuring devices including micrometers, calipers, optical measuring machine, gauges and all inspection equipment
• Ensure tool room facilities and equipment are properly maintained and used.
• Ensure tool room health and safety precautions are taken care at all times.
• Participate in Continuous Improvement Project.
• Any other ad hoc jobs assigned by Manager / Supervisor

Requirements:

• Minimum 5 year experience in mould manufacturing toolroom environment.
• ITE or Nitec certificate in Tool & Die Trade.

Technical Sales for Precision Engineering

1 to 2 years sales experience in Engineering Products

Engineering Products examples: Bearings, Linear Guides, Actuators, Linear Motors, Gantries etc

Industries: Semiconductor, Biotech, Renewable energy

Use of Microsoft Office and ERP, CRM will be good

Willing to travel if required

Positive attitude, ability to interact with both internal and external parties

Ability to learn quickly, and problem solve if required

Responsibilities:

• Prepare Product / Architectural / Mechanical drawings with AutoCAD / Solidworks.
• Work within stated procedures to ensure that design records/controls are maintained.
• Provide product technical support to customers / suppliers.
• Ensure Supplier’s Quality meet our Quality Standard.
• To Initiate / propose / participate in Quality Improvement.
• Take part in new product development.
• Other ad-hoc job assigned by the supervisor.

Requirements:

• Min Degree in Mechanical/Engineering or equivalent.
• Good understanding of Precision machining processes.
• Well versed with manufacturing process & good understanding of material specifications common to Ironmongery industry.
• Minimum 3 to 4 years experience in mechanical field or Ironmongery industry.
• Required language(s): English, Mandarin (to liaise with 90% Mandarin speaking customers - majority, and suppliers in regard to technical support).
• Well verse in Solidworks & AutoCAD Software.
• Responsible, mature, independent with a positive attitude and willingness to learn.

Additional Information

• Office Location: 141 Woodlands Industrial Park E 5, Woodland E-Terrace Singapore 757507.
• Working Hours: Mondays to Fridays (8:30am to 5:30pm), Alternative Saturdays (8:30am to 1:30pm)

For immediate consideration, please indicate the following information in your resume:

(a) Current and expected salary

(b) Earliest available date to commence work

Please note that qualified applicants who are immediately available will be given priority, and we regret that only shortlisted applicants will be notified.

• Prepare and submit technical shop drawings for approval.
• Project Management and site supervision of the Installation and Commissioning of Air-Conditioning and mechanical ventilation works at Residential and Commercial Building.
• Planning and Design of M&E and Air-Conditioning works
• Attend site meeting, site inspection with sub-contractor and consultants.
• Modify the M&E Drawing According to Site Condition.
• Conduct the testing & commissioning of ACMV system.
• Managed the supervisor and workers to complete within limited time.
• Prepare monthly project progress claim/ progress report.
• Estimating and predicting the cost of tenders.
• Working experience in Air-conditioning/Chilled Water system and Mechanical Ventilation

Responsibilities:

• Prepares the schedule and oversee the T&I activities as per project specifications and procedures.
• Manages the subordinates’ staff in the day-to-day activities and that project goals are met as per budget.
• Coordinates with several departments related to T&I of project.
• Supervises the performance of his team and should respond to the issues during T&I.
• Attends the Project meetings and update the status.
• Liaises and review with T&I companies’ regarding transportation and Installation process, approach and time-lines to de-risk changes to schedule.
• Develops and drive the logistics concepts for project from conception to completion.

Requirements:

• Bachelor’s degree in Electrical and Electronics Engineering or related engineering disciplines
• 3-5 years’ experience related experience
• Knowledge in EPC projects for O&G, Offshore Renewables & system
• Proficient in MS office applications
• Dynamic, self-motivated, proactive and results oriented

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

As the Facilities SmartFac & Control Engineer, you are required to lead engineering and maintenance works in the fields of SMART Fac and Control systems on site, with the necessary guidance and direction from Facilities organization, to achieve facilities department, site, facilities corporate and company goals.

Job Responsibilities:

• Lead on site Smart System transformation and on implementation of Smart fac projects with AI-enabled detection and analytics in collaboration with other Micron Departments.
• Lead on Sustainability and Environmental Control system deployment with early detection and predictions, utilizing Industry 4.0 system.
• Lead on labor productivity automation projects with innovative idea to improve facilities team efficiency.
• Plan, design and lead Control Automation engineering projects includes new construction, system upgrading and quality improvement.
• Lead troubleshooting and attend to abnormalities in support of Operations in a timely manner on system under Smart FAC & Control section when required.
• Lead on the planning and supervise Preventive and Corrective Maintenance work activities, priorities and reallocate resource when required.
• Perform capacity tracking and planning for Instrumentation and Control systems.
• Acquire estimated cost and raise purchase requisition for service or parts necessary for repair and maintenance purpose, when required.
• Utilize computer base software to document and analyze records of work order and equipment history.

Job Requirements:

• Bachelor Degree in Electrical/Electronics/Computer engineering or equivalent related field.
• Experience in programming of programmable logic controller (PLC) and process automation PID control.
• Experience and Good knowledge of various handheld tool, portable and panel measuring device and equipment.
• Experience in SCADA, HMI and reporting software.
• Proficient in Microsoft office.
• Ability to use and create schematic, single-line drawing and related equipment and system documentation
• Good knowledge on Python, Java, C/C++, C#, SQL, machine learning software.
• Ability to work in a team environment with various professional level.

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

Requires a BS in Electrical or Computer Engineering and > 5 years of related experience

Description:-

• Report to R&D Manager
• Design and prepare manufacturing drawings of electrical switchboards
• Assemble modular drawings base on the panel design
• Perform Weight, Heat loss calculations and Air Flow simulations as required
• Prepare Material Order List for Mechanical parts
• Liaise with vendors for Material enquires
• Work closely with Manufacturing & Production team
• Perform other duties as directed by supervisor

Requirements:-

• Minimum Diploma/Higher NITEC/NITEC in Mechanical Engineering
• Knowledge in BIM, VertexG4 and AutoCAD M&E 3D drawings
• Mechnical background with 2D and 3D drafting skills
• Able to read and interpret manufacturing blueprints and specifications, recognize and identify different types of materials/sheet metals used in switchboards
• Proficient in 3D software, flat pattern development, PC skills and able to learn new software applications quickly
• Attentive to details with capability of self-checking for accuracy

Education & Experience:

• Bachelor's or Master's degree in Mechanical Engineering, Mechatronics, or a related field.
• Proven experience in designing and improving mechanical systems, preferably in the food and beverage or automation industry.

Technical Skills:

• Strong understanding of mechanical design principles and optimization techniques.
• Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and simulation tools.
• Knowledge of materials science and its application to juice extraction mechanisms.
• Familiarity with automated vending machines or juicing equipment will be advantageous

Problem-Solving & Innovation:

• Demonstrate ability to identify inefficiencies and develop innovative solutions.
• Analytical mindset with attention to detail and a passion for continuous improvement.

Communication & Collaboration:

• Excellent communication skills to present technical concepts to diverse audiences.
• Strong team player with the ability to work collaboratively across departments.
• Willingness to travel occasionally for factory visits or international collaborations.

As a Principal Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities

• Leading the design, development and characterization of new tools and identifying and closing any hardware and procedural gaps.
• Innovate solutions that enable best in class performance
• Oversee installation and upgrades of tools ensuring quality of work, cost control and alignment to project schedule.
• Engage equipment vendors to improve current products and implement roadmap needs.
• Work with Process Engineers, Manufacturing, Procurement, and Vendor partners to develop a comprehensive package capable for our volume manufacturing sites.
• Generating and maintaining documents that outline equipment performance, operating procedures, maintenance specifications, and cost metrics.
• Support Internal And External Audits

Requirements:

• • A minimum of PhD or >3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• • In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• • Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• • Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• • Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• • Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• • Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• • Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

As a Global FE Central Planning Capital Engineer in Micron, you are part of the Global FE team responsible for managing the capital budgeting, funding and savings process.

In this role, you will work closely with Manufacturing Central Team resources, Fab resources, Global Procurement and Finance. You need to have good communication and presentation skills, and able to provide clear and qualitative data analysis to facilitate decision making. You should possess detailed understanding on capital expenditures and able to identify opportunities for capital optimization.

Capital System Project

• Contribute and provide subject matter expert guidance and requirement feedback in Capital Asset Lifecycle Management (CALM) project – to set up the end-to-end CALM system in SAP replacing MICAP for budget and fund.
  
• Communicate status of tasks, report issues, risks, changes, and quality concerns to the project manager and team.
  
• Establish reports to monitor Capital Health.
  
• Discuss and propose metrics and the action plans required.
  

Monthly Capital and Cash Flow Review Process

• Facilitate the monthly capital review process for Micron’s Front End (FE) Operations. Define, sustain, and continually improve the processes to enable the budgeting, funding, savings and GR/cash flow compliance of Micron’s FE Operations.
  
• Provide support and technical expertise to the various stakeholders to deliver an effective capital request to the executive teams for approval.
  
• Collaborate with site planning and other Teams to ensure used assets are considered before the commitment of any new capital expenditures, and identify opportunities for capital optimization.
  
• Balance the need to push for optimized capital plans against the monthly capital cycle deadlines.
  
• Act as a liaison between the sites and other Central groups, to establish and enforce business processes for a sustained and effective capital cycle, and help resolve conflicts as and when required.
  

Executive Capital Review

• Generate Biweekly and Monthly Capital cash flow update to leadership based on MOR, Loading scenarios, Cashflow adjustments and Projects activities.
  
• Validate Micron Capital Ledger and work closely with Finance team and other organizations/team to roll up Board of Directors reporting and Earnings Call data.
  
• Generate Wafer Fab Equipment (WFE) data based on validated Finance cash flow reports for Industrial benchmarking analysis
  

Requirements :

• Masters/Bachelors’ Degree in Engineering.
  
• Strong verbal communication and presentation skills
  
• Ability to work closely and effectively with others in a team environment
  
• Strong data validation skills and reporting skills
  
• Strong ability to perform data analysis and problem solving
  
• Ability to map relevant conclusions to support decisions making
  
• Exceptional customer focus
  
• Knowledge and practical application of statistics, data analysis and problem solving
  
• Independence and high determination to complete tasks in a timely manner
  

As the Global Facilities Regional Engineering Electrical Engineer you will be responsible for providing technical support, expertise, and lead business process alignment on construction project design, management, schedule, cost control, testing & commissioning, operational and maintenance programs for the facility Electrical systems at all manufacturing sites in your location / region.

As a global team member residing in your current site/geography, you will represent all facility design standard alignment, construction project management, O&M BKM alignment initiatives. You will also support the Global Facilities Central Engineering Team, Construction Team , Line Planning Team and O&M Team in providing critical design standard alignment, supplier quality improvement, operational and maintenance input and support construction projects.

Critical metrics include construction project management, schedule, cost control, safety index, and facilities system reliability improvement program in eliminating production events that minimize lost moves and scrap.

Responsibilities and tasks:

• Project
• Design and construction of regional green field project with alignment to global standards and collaboration with central sustainability, cost, construction and line planning team.
• Engineering support for site projects, Alpha to Beta technology transfer and sustainability projects
• Review and approve site capacity expansion and sustainability capex
• Review priority and make business driven decision on Facilities Reliability Improvement project capex
• Reliability
• Engineering support for site system improvement projects (System Reliability Improvements, Quality Improvement and Equipment EOL replacements)
• Oversee regional efforts and identify opportunities to align strategic program (eg BCP, Critical spec, Quality Defense line)
• Engineering support for major SIPP review
• Regional events lesson learnt sharing and influence of global standards development
• Communication
• Single point of contact for regional sites and GFC central teams
• Provide alignment on metrics reporting
• Engineering, O&M and Others
• Expert understanding of each sites Electrical systems operational and maintenance capabilities in order to provide critical support
• In addition to your global Electrical engineering role you will also provide site/regional support for global facility initiatives at your location/region
• Technically lead a global cross functional team focused on project, design, construction, operational excellence with the site Electrical systems engineers
• Provide support to all sites including on site presence for construction project and critical Electrical failures of
• Actively involved in TPM implementation and alignment along with ongoing support for Electrical systems
• Drive improvement in the quality of our utilities through variation reduction (SPC).
• Drive the alignment for common methodologies including SPC, conformance, SIPP’s, MOC and 8D problem solving throughout the network for Electrical systems
• Identify and deploy cost reduction efforts while optimizing and reducing energy usage for Electrical systems throughout the network
• Assess and insure effective and consistent PM and predictive maintenance programs, procedures and checklists across the network
• Regular communication with the site engineering and O&M teams on status and performance
• Analyze and benchmark equipment performance.
• Identify and develop training and certification programs that support global and site efforts
• Develop appropriate metrics to drive improvement (On time PM’s, MTTF, MTTR etc.)
• Send out regular updates with key items of focus and initiatives.
• You will review FIPA/METS events and provide recommendations to drive the reduction of critical Electrical impact events.
• Collaborate with the construction / engineering team to insure alignment on projects
• Support the network effort to implement, monitor and drive continuous improvement for success of Micron’s Sustainability programs in alignment with the long-term Sustainability strategy
• Benchmark system performance and drive Best-In-Class approach (BICs) across network
• In depth review of site sustainability projects and sustainability data monitoring to support site’s and company’s sustainability targets.
• Provide technical advice and support to overcome challenges and roadblocks in project planning & execution
• Support sustainability projects achievement data acquisition and validation in central tracking depository.
• Conduct, Analyze and create improvement actions based on electrical systems studies using design software tools such as SKM or ETAP.

Education Required

• Bachelor’s Degree or equivalent experience in Electrical Engineering or any related field of study

Experience Required

• 10+ years of Facility Engineering experience and preferred with Semiconductor Industry experience.

Experience Desired

• Lead or actively involved in global facility engineering efforts

As a Micron Singapore Construction ELV Engineer, for the design, installation, and commissioning of ELV systems in semiconductor manufacturing facilities. This role involves ensuring that the critical systems for communication, security, and control are properly integrated and functional to meet project requirements.

Extra Low Voltage Systems

Design & Engineering of ELV Systems:
- Design and develop ELV systems such as Life Safety System (LSS), fire alarms, CCTV, access control, public address systems, structured cabling, and building management systems (BMS).
- Perform detailed ELV system layout, cabling schedules, and interface drawings to ensure smooth integration with electrical and mechanical systems.
- Select and specify appropriate ELV components and devices, ensuring they meet project specifications and comply with local and international standards.
- Collaborate with other engineers (electrical, mechanical, etc.) to coordinate ELV designs with other building services.

Project Execution & Installation Oversight:
- Supervise and provide technical support during the installation of ELV systems, ensuring work is performed according to approved designs and specifications.
- Coordinate with contractors and subcontractors for the proper installation of cabling, devices, and control systems.
- Review shop drawings, submittals, and material selections from contractors to ensure compliance with project requirements.
- Conduct regular site inspections to monitor ELV installation progress, identify any issues, and ensure adherence to safety standards.

Testing, Commissioning, & Integration:
- Oversee and conduct system testing and commissioning of all ELV systems to verify they function as per design specifications and operational requirements.
- Ensure seamless integration of ELV systems with other building systems, such as HVAC, lighting controls, and security systems.
- Troubleshoot and resolve any technical issues during the testing and commissioning phases.
- Review as-built documentation, operation manuals, and test reports for handover to the client or facility operations team.

Compliance, Safety, & Continuous Improvement:
- Ensure all ELV installations comply with relevant codes and standards (e.g., NFPA, BICSI, TIA/EIA) and that safety protocols are strictly followed.
- Implement energy-efficient and scalable solutions for ELV systems, considering the evolving needs of semiconductor manufacturing facilities.
- Stay updated on advancements in ELV technologies, recommending system upgrades or improvements where applicable.
- Participate in post-project evaluations to gather lessons learned and apply best practices to future projects.

Qualifications:

Education: Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field.
Experience: Minimum 5 years of experience in ELV systems design and installation, preferably within semiconductor or high-tech construction environments.
Certifications: Profinet certification is required,
Skills: Strong knowledge of ELV systems, proficient in AutoCAD, Revit, or similar design tools; excellent problem-solving and communication skills.

Working Conditions:
This position involves working in both office settings and on active construction sites, with the potential for travel to project locations.

Working Location :

F10N

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

As a Micron Singapore Construction Electrical Engineer, you will play a key role in the design, installation, and commissioning of electrical systems in semiconductor manufacturing facilities. This role requires strong technical expertise, project management skills, and the ability to collaborate effectively with cross-functional teams to deliver projects on time and within budget.

Electrical Distribution

Key Responsibilities:

Electrical System Design & Engineering:
- Develop and review detailed electrical designs, including schematics, wiring diagrams, and system layouts, ensuring they meet the specific needs for manufacturing, cleanrooms and process areas.
- Perform load calculations, short circuit analysis, and system capacity planning to ensure electrical infrastructure is robust and reliable.
- Work with the general contractor to specify and select electrical equipment, such as switchgear, transformers, distribution panels, and backup power systems, ensuring compliance with industry standards.
- Collaborate with other engineering disciplines (mechanical, structural, etc.) to ensure the electrical design is integrated with other building systems.

Construction Support & Installation Oversight:
- Provide technical guidance to construction teams during the installation of electrical systems, ensuring adherence to design specifications, safety standards, and project timelines.
- Review and approve electrical submittals, shop drawings, and contractor work plans.
- Conduct regular site inspections to monitor progress, troubleshoot issues, and verify that electrical work is performed in compliance with codes and regulations.
- Work with the general contractor to manage and coordinate with subcontractors and suppliers for the procurement, delivery, and installation of electrical components.

Testing, Commissioning, & Handover:
- Oversee and participate in the testing and commissioning of electrical systems, including power distribution, lighting, emergency power, and control systems.
- Work with the general contractor and/or sub contractors to perform or oversee functional testing, troubleshooting, and adjustments to ensure systems operate according to design and client requirements.
- Review documentation for system handover, including as-built drawings, test reports, and operating manuals.
- Lead or support the transition to facilities operations, providing technical expertise during the ramp-up phase and ongoing support as needed.

Compliance, Safety, & Continuous Improvement:
- Ensure all electrical installations comply with relevant codes (e.g., NEC, IEEE), safety standards (NFPA, OSHA, MOM), and environmental regulations.
- Implement best practices for energy efficiency, sustainability, and electrical safety within semiconductor environments.
- Stay updated with the latest advancements in electrical engineering and semiconductor manufacturing technologies, recommending improvements or innovative solutions for future projects.
- Participate in post-project reviews and implement lessons learned to improve electrical designs and processes in subsequent projects.


Qualifications:

Education: Bachelor’s degree in Electrical Engineering or related field.
Experience: Minimum 5 years of experience in electrical engineering, preferably within the semiconductor or high-tech manufacturing sector.
Skills: Proficiency in electrical design software (AutoCAD, Revit, ETAP), strong knowledge of electrical codes and standards, excellent problem-solving and communication skills.

Working Conditions:
This position requires working in both office environments and active construction sites, with occasional travel to project locations.

Working Location :

F10N

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Key Job Accountabilities:

· Sustain the respective eWLB processes for all eWLB engineering products and be technical expertise in their respective areas.

· Ensure new products meet special requirements of customer at various processes.

· Ensure smooth transition of new products from engineering qualification to LVM down to HVM by providing technical support at respective processes.

· Perform continuous improvement, engineering evaluations and process optimization through DOE and JMP analysis approach.

· Support the qualification of new and alternative materials (direct and indirect), tools, and equipment.

· Review the FMEA, OCAP and Control Plan of new products to achieve better yield and assembly performance prior and during LVM and HVM transition.

Participate in cost reduction projects during engineering builds.

Required Experience and Qualifications

· Requires B. Eng, B. Sc, M. Eng, M. Sc or PhD in Electrical, Electronics, Mechanical, Chemical Engineering, Physics, Material Science or its equivalent.

· Minimum 2 years of relevant experience in wafer process is preferred.

· Minimum 5 years of experience in relevant areas is an added advantage.

· Familiar with DOE, FMEA, SPC and 8D methodologies, and data analysis using JMP.

· Self-driven and good communications skills.

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Electrical and Electronics Engineer

Roles & Responsibilities

Job Description

· Be responsible for designing new product developments and sustaining matured products in the semiconductor automation equipment industry.

· To design and layout system-level electro-mechanical modules and interconnects.

· Maintain development and engineering documents and provide technical support to production and field.

· Ensure world-class quality and competitive cost.

· Committed to meet or exceed customer requirements and schedule.

Requirements

· Diploma / Degree in electrical and electronic engineering, mechatronics, or electro-mechanical engineering. ITE with more than 10 years’ experience will be considered.

· At least 1 year of relevant experience

· Strong fundamentals in actuators, servo motors, sensors, power supplies, cabling, and electro-mechanical engineering.

· Experience in safety consideration, good grounding practice, understanding and elimination of electrical noise, EMI/EMC compliance, and international standards requirements like CE, SEMI, IE, etc

· Knowledge of CAE/CAD such as PADS, AutoCAD, SolidEdge, MATLAB, etc.

· Familiar with measurement equipment such as oscilloscope, current probe, position sensor, accelerometer, etc.