Key Job Accountabilities:

· Sustain the respective eWLB processes for all eWLB engineering products and be technical expertise in their respective areas.

· Ensure new products meet special requirements of customer at various processes.

· Ensure smooth transition of new products from engineering qualification to LVM down to HVM by providing technical support at respective processes.

· Perform continuous improvement, engineering evaluations and process optimization through DOE and JMP analysis approach.

· Support the qualification of new and alternative materials (direct and indirect), tools, and equipment.

· Review the FMEA, OCAP and Control Plan of new products to achieve better yield and assembly performance prior and during LVM and HVM transition.

Participate in cost reduction projects during engineering builds.

Required Experience and Qualifications

· Requires B. Eng, B. Sc, M. Eng, M. Sc or PhD in Electrical, Electronics, Mechanical, Chemical Engineering, Physics, Material Science or its equivalent.

· Minimum 2 years of relevant experience in wafer process is preferred.

· Minimum 5 years of experience in relevant areas is an added advantage.

· Familiar with DOE, FMEA, SPC and 8D methodologies, and data analysis using JMP.

· Self-driven and good communications skills.

• Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.
• Interacting with clients, interpreting their needs and requirements, and representing them in the field.
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.
• Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.
• Reviewing the engineering tasks and initiating the necessary corrective actions.
• Developing specifications for the project's needed equipment.
• Creating frameworks to measure the project's metrics and data collection.
• Establishing field test methods and methods for monitoring the quality of those tests.
• Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Responsibilities:

-Responsible for all technical support of new product introduction, including product improvement, component production, and the entire process of product assembly and packaging
-Responsible for effective change management: implementation of Engineering Change Notice & get
customer approval for Engineering Change Request
-Receive initial product training, compile, and update product assembly instructions, be responsible for the complete transfer of product technical details from the customer to the company, and continuously improve, and innovate processes and technologies.
-Contact the customer's designated personnel on product-related technical issues.
-Responsible for training the assembly team and implementing improvements within the production team.
-Establish assembly work instructions based on customer & specifications.
-Monitor, identify, develop, and implement improvements in process control systems and equipment.
-Create Bill of Material & routing in ERP for assembly.
-Troubleshoot and optimize assembly processes and follow up with production Improve process robustness, yield, product quality and process time.
-Define and follow up on special tooling requirements.
-Manage customer documentation (drawings, specification, etc.)

Education:

-Possess at least a Degree in Mechanical Engineering or Mechatronics or equivalent.

Skills:

-A minimum 2 years working experience in high precision mechatronics assembly or design.

Experience:

-Knowledge and direct experience in mechanics, electronics, control systems, pneumatics, hydraulics in semicon industry.
-Knowledge in Assembly of mechatronics systems, linear motors, sensors, servos, actuators, dynamics, controls, etc.
-Complex mechatronic systems for test and qualification of design changes.
-Exposure to multi-disciplinary projects, such as imaging/optical systems, semiconductor, or lithography preferred -but not mandatory.
-Able to perform root cause analysis and resolve problems on a conceptual and advanced troubleshooting level.
Proficiency in reading and updating technical drawings.

Responsible to manage overall aspects for project/s assigned.

2. Coordinate necessary site induction (SIC).

3. Coordination with all parties for site installation and arrangement, resolve any issues arise.

4. Monitor workers attendance and work progress.

5. Make sure site workers work according to site requirement for safety and quality.

6. Manage and arrange any request from site supervisor / workers.

7. Update weekly progress status to management.

8. Attend to client line walk and follow up punch list closure.

9. Prepare any necessary documentation for project assigned.

10. Any other ad-hoc tasks assign by management.

Skill Requirements:

1. Diploma or Degree in Engineering.

2. Minimum 2 years’ relevant working experience in Semi-conductor piping system preferred.

3. Able to build rapport with different group of people.

4. Good knowledge in construction safety and quality.

5. Experiences in UHP gas / chemical system will be added advantage.

6. Able to work with minimum supervision.

Electrical site engineers direct and oversee electrical engineering projects at construction sites, resolving issues and ensuring that work is completed according to specifications. They balance project management and engineering tasks ranging from designing electrical plans to monitoring contractors. Electrical site engineers also ensure that plans and work are completed according to local and national electrical codes. Additionally, electrical site engineers conduct testing and maintenance on electrical systems, including final inspections prior to job completion.Electrical engineers design, develop, test, and supervise the manufacture of electrical equipment, such as electric motors, radar and navigation systems, communications systems, or power generation equipment. Electrical engineers also design the electrical systems of automobiles and aircraft.

Mechanical Engineer optimize the performance of mechanical products, machinery, and equipment. They assist mechanical engineers to design mechanical products, analyze performance results, and maintain mechanical equipment and machinery. They may be employed in the transportation, industrial, electrical, or manufacturing industries.

Responsibilities

• Documenting and definng the Factory & Production processes and procedures across the Group
• Recommend and implement improvements to process and process automation
• Deploy and implement the Production processes and procedures in Singapore and overseas
• Manage the next-gen production system for switchgear manufacturing and assembly
• Responsible for the Audit and Compliance of Factory and Process Engineering across the Group
• Any other duties related to operations and process engineering

Requirement

• Degree/Diploma in Electrical, Mechanical Engineering or related field
• At least 2 years of relevant working experience in process engineering in the manufacturing environment
• Have initiative, able to work independently
• Possess strong analytical and problem solving skills
• Good communication and written and presentation skills
• Able to travel overseas

Job Description
As a BIM Engineer, you will report to the Senior Design Engineer and be responsible for the successful implementation and management of BIM processes in the construction field, specifically focusing on Building Services, Airconditioning, and Mechanical (M&E, ACMV) works. You will collaborate closely with the design department to ensure compliance with engineering and safety requirements and coordinate with stakeholders to maintain the integrity and accuracy of the BIM model throughout the project lifecycle.

Key Responsibilities

1. Construct and manage Building Information Models (BIM) with precision, ensuring the integrity and accuracy of all models. Ensure timely coordination and completion of tasks as assigned by the immediate superior.
2. Ensure all BIM models comply with project specifications and requirements.
3. Maintain and update the model library for all ongoing projects, ensuring that all data remains secure and is treated as company property.
4. Collaborate with project teams to collect site information for updating project BIM models.
5. Work closely with the Quantity Surveying department to provide drawings and information required for tendering, cost estimation, monitoring, and scheduling.
6. Coordinate with the BIM department to validate and confirm the accuracy of BIM designs.
7. Maintain, update, and manage hardware and software essential for the operation of BIM.
8. Assist in the creation of 2D AutoCAD drawings and ensure seamless integration between 2D and BIM models, bridging the gap between office and site operations.
9. Ensure all work conforms to the company’s ISO standards.
10. Support the submission of Operation, Maintenance, and Monitoring (OMM) manuals and media presentations using BIM models.
11. Follow the company's responsibility and authority matrix in the execution of duties.
12. Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes and standards, such as Singapore Code of Practice (CP13), SS553, and the Fire Code.
13. Utilize design software to perform thermal load calculations, energy modelling, and system sizing.
14. Prepare design documents including system layouts, schematics, and specifications.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills:Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage. Inexperienced candidates must be willing to learn, with training provided.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Description

• Engineer, design and deliver grid connected or standalone solar photovoltaic systems (rooftop, ground mounted and floating arrays) on time and within budget.
• Prepare PVsyst report and manage proposals and bidding process for obtaining and delivering these services, including preparation of bill of materials (BOM) for project.
• Review solar system engineering designs, modeling, performance data, PVsyst report and provide engineering support during the construction process.
• Review the costs of structural estimates, interconnection, permitting agreements, production estimates, and assessment of commercial risk factors.
• Provide and/or review final bids, proposals, and RFIs, and provide support during construction and commissioning.
• Maintain design and proposal requirements, knowledge of codes and standards, design procedures, methods and process, improve efficiency of project development and project selection process.
• Selection of suitable equipment and components such as inverters, PV panels, switch bords etc.

Qualification Requirements

• Candidate possesses at least a Diploma in Building Services Engineering, Green Building & Sustainability, Intelligent Building Technology or Green Building Technology or Electrical Engineering.
• Minimum 2 years of relevant experience.

Preferred Skills

• Ability to design PV systems 415/400/230V power levels.
• Has knowledge in PVSYST, AutoCAD, BIM modeling and electrical design concepts.
• Aware of safety and standard requirements from local authority.

Roles & Responsibilities

• Planning and organizing projects, including developing project timelines, budgets, and resource plans
• Resolve and coordinate technical issues with Consultants/ Authorities
• Liaise and coordinate works with subcontractors
• Liaise with all parties involved in the project including authorities, consultants, clients, subcontractors and suppliers
• Provide support to supervisors in relation to site works
• Ensure site safety and work with safety personnel to regulate safety standards on site
• Ensure quality standards are maintained, site inspections are carried out and technical/drawing issues are resolved on time
• Ensure proper documentation according to our ISO system
• Assist project manager in planning and execution of project plans at construction site
• Execute project plan and ensure works completed as per schedule and in accordance to contract specification and design drawing
• Attend site meetings and inspections, report regularly on progress and monitor schedule
• Prepare and monitor work schedules, project costing, procurement, and coordination with all partied involved to ensure work progress smoothly and completed within target time and budget
• Supervise and report progress of the work to Project Manager

Requirements:

• Diploma / Bachelor Degree in Civil Engineering or Construction Management or relevant work experience will be considered.
• Minimum 3 years of relevant experience in construction industry.
• Possess good communication skills and team-orientated environment.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget

• Perform site planning, coordination and inspection that related to M&E and facilities

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget

• Perform site planning, coordination and inspection that related to M&E and facilities

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget

• Perform site planning, coordination and inspection that related to M&E and facilities

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

You are responsible for, but are not limited to, the following:

• Develop and optimize unit processes to meet the yield and quality requirements of advanced Replacement Gate 3D NAND parts
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing Dry Etch team on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Identify process simplification opportunities and drive multi-functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Provide advice and counsel to management on significant technical issues. Lead and initiate ground breaking projects through patents/technical papers.
• Communicate and collaborate with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a requirement.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

You should possess

• Masters/PhD in Electrical & Electronics, Chemical, Mechanical, Materials Engineering.
• Strong aptitude for research and development and ability to create production-worthy technologies.
• Ability to develop and maintain relations with multi-functional teams and vendors.
• Strong communication skills (written, verbal and presentation).
• Highly motivated and adaptable to our demanding, dynamic and rapidly changing work environment; flexibility to work for extended hours, as required.
• Ability to travel to US R&D site for few months to engage in collaborative R&D work.

JOB TITLE

Product Engineer

DEPARTMENT

Engineering

ACCOUNTABILITY

Section Leader, Product Engineering

DIRECTLY RESPONSIBLE FOR

Nil

PURPOSE OF JOB

The incumbent will be responsible for the design change controls and product sustaining engineering initiatives. He / She shall ensure that the product designs are validated per customer requirements, including domestic and international regulatory standards.

Utilize technical, project and leadership skills in the development, improvement and optimization of critical care products such as transducers and catheters. Apply technical principles, theories and concepts, as well as problem solving capabilities to resolve product design issues. Maintain design history files, determine test methods requirements, design verification, perform failure mode effect analysis and implement product-related solutions that improves performance and/or quality, as well as address shelf life requirements.

Provide technical support for existing products with issues relating to regulatory compliance, customer complaints, process improvement and CAPA resolution.

Keep abreast of potential new technologies to enable the design of new materials and capabilities. Leverage existing technologies to advance our core businesses while supporting the development of new products.

JOB FUNCTION

• Participate in Product Engineering efforts to validate / verify product design per customer requirements.
• Manage cost of sustaining engineering projects assigned.
• Make timely reports of progress, noting deviations from time or cost plans or customer design requirements.
• Coordinate development efforts with packaging engineering, process engineering, and all other departments that participate in product development.
• In own field of scientific / engineering competence, maintain up-to-date familiarity with developments through attendance at professional meetings, literature and consultations.
• Assist in anticipating, answering and alleviating any customer dissatisfaction with a product.
• Support cost reduction programs and provide technical line support for existing product lines.
• Establish / maintain a base of knowledge of customer requirements through literature, customer visits, etc.
• Comply with all local, state, federal, and Merit safety regulations / policies / procedures.
• Comply with all quality policies / procedures / practices through consistent application of sound Quality Assurance principles.
• Other projects as assigned.

INTERACTION

• Internal communication with all levels of associates.
• External liaison with inter-companies, customers and vendors.

JOB SPECIFICATIONS

• Degree in Bio-Medical / Mechanical / Electrical Engineering.
• Minimum 3 years’ experience of product / process engineering in a medical device company or related industry.
• Experience in product design with thermoplastic knowledge, preferably in medical device industry, will be an advantage.
• Knowledge in CAD Design / SolidWorks and statistical methods.
• Excellent interpersonal and communication skills

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget

• Perform site planning, coordination and inspection that related to M&E and facilities

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Job Description & Requirement

• Assist and provide technical inputs/support in our R&D in establishing a quality product from concept stage to prototype completion including conducting tests, interpreting data, finding high-quality materials to use, and conducting research on various parts.
• Responsible for design & development of commercial vehicles focus on technical specification and performance of the vehicles and powertrain components as well as software used in the vehicles.
• Liaise with OEMs on technical issues and raise Technical Reports, Prepare Technical Instructions to address technical issues on our product.
• Prepare Assembly work instructions, Quality control instruction and Operation Manual of our product.
• Create & maintain accurate Manufacturing Bill of Materials, develop cost- estimates for manufacturing process hours.
• Prepare new product specifications and provide support on component installation as required.
• Manage workload with a positive attitude as a team player in a collaborative work environment.
• Manage Product costing & provide support to sales.
• Qualification and Experience
• Min Diploma/Bachelor in Mechanical Engineering.
• Minimum 4 years’ experience working in an Automotive, Manufacturing, Machine shop, assembly environment or similiar environment
• A thorough understanding of engineering design principles and material processing
• Experience in Bill of Materials from either the Automotive, Aerospace or Rail industries
• If you have considerable experience of the automotive industry in an engineering Release & Change environment is an advantage
• If you understand automotive terminology, familiar with vehicle systems & components and the sequence of build of a vehicle is an advantage
• Proficient with Microsoft Word, Excel, PowerPoint
• Familiar with ISO 9001 or TS 16949 Quality Management System
• Experience in ERP applications will be an added advantage.
• Familiar with Lean Manufacturing principles, including Continuous Improvements
• Good communication skills, highly efficient, passion for engineering.

• Work closely with the assigned project team and coordinate with Project Managers on all aspects of the project to complete the project in a timely manner;
• Plan and keep track of schedules at construction sites
• Troubleshooting of site and installation issues;
• Ensure all works are carried out within schedule and quality control of installations;
• Check drawings against site to raise any discrepancies and details issues;
• Planning of materials and delivery to site;
• Ensure that government, company and WSH safety policies are complied with at the factory and sites;
• Any other ad-hoc duties assigned

Requirement:

• Degree in Civil or Mechanical or Engineering field;
• Minimum of 3 years relevant working experience in a technical role or construction industry;
• Familiar with details and installation processes;
• Familiar with various design, installation and fabrication drawings

1. JOB DESCRIPTION

Job Title

ENGINEER

Occupation

ENGINEER

Job Description & Requirements

Roles & Responsibilities

Responsible of site coordination and supervising to ensure projects are completed according to schedule.

Liaise closely with clients, consultants, and suppliers on all project related matters.

Attend site walk, meeting, site inspection when required.

To carry out technical support functions in mechanical engineering work on site.

Any ad hoc duties asand when assigned by management.

Job Description

1. To study Tender documents and drawings / To summarize the Tender requirements
2. To plan the work sequence and identify cost item
3. To prepare Tender submission (Document, Schedule and Cost)
4. To figure out the risk of tender

Job Requirements

1. Experience in the Civil / Infrastructure Project Site (as a Site Engineer or Quantity surveyor)
2. Experience in the Tender preparation on Civil / Infrastructure Tender.

• Preventive and corrective maintenance of Building Management System, Energy management System
• Development of Functional Design Specifications, Software Design Specifications, Control Schematics/Write-up and other software/test documentation.
• Handle application programme change management, hardware deployment management & documentation
• Implantation of PLC/SCADA project from concept to design and programming
• Site Testing and Commissioning with clients.
• Interface design, implementation and testing between various third-party systems
• Meeting with clients, reports and documentation
• Capable of performing troubleshooting independently
• Implement improvement works to clients.

Requirement:

• Diploma or Degree in Engineering (Electrical/ Electronics/ Automation / Building Technology).
• Experience in interfacing design, implementation and testing between various third-party systems using Modbus, BACNet or other protocols will be an advantage.
• 2 years’ working experience in building ACMV systems / PLC related experience.
• Must have Mitsubishi PLC programming experience
• Knowledge of SCADA (Niagara N4 or Mitsubishi MC Works) is an advantage.
• Have worked with Building Management System/SCADA/HVAC system is an advantage.
• A resourceful individual with good organization, time management and problem-solving skills.
• A team player and at the same time able to work independently in a fast-paced environment.
• Able to work during weekends or night jobs occasionally when required.
• Competitive remuneration package will be offered to the shortlisted candidate.

Job Overview:

• Report directly to the Project Manager, managing ACMV works within the built environment.
• Ensure project management aligns with engineering and contractual requirements.
• Collaborate with the design department to ensure compliance with engineering and safety standards.
• Oversee contracts, costs, schedules, coordination, and overall project completion.

Key Responsibilities:

1. Manage projects from concept to completion, including planning, scheduling, budgeting, and stakeholder coordination.
2. Implement and oversee Project Quality Plan, Safety Management Plan, and Building Execution Plan.
3. Develop, maintain, and manage the BIM model and project documentation (drawings, specifications, reports).
4. Liaise with clients to meet their requirements and ensure project scope, schedule, and budget compliance.
5. Address and resolve technical or contractual issues during the project lifecycle.
6. Oversee the construction process to ensure timely, budget-compliant, and high-quality completion.
7. Coordinate with consultants, contractors, and ensure contractor performance.
8. Manage project handover to the client, ensuring compliance with all relevant Singapore regulations and standards.
9. Promote and manage safety activities and compliance inspections.
10. Obtain necessary permits and approvals and work with authorities to minimize public disruption during construction.
11. Ensure sustainability and environmental friendliness of the project.

Preferred Experience:

• Experience in healthcare facilities (hospitals, labs, operating theatres).
• Experience in commercial or industrial buildings (warehouses, factories).
• Experience with government projects and data centers.

Requirements:

• Degree in Mechanical Engineering, Building Services, Project Management, or a related field, with ACMV project experience preferred.
• Graduates with a degree in Sustainable Infrastructure are encouraged to apply.
• Bizsafe Level 2 safety certification or higher preferred.
• Minimum 3 years of experience in related fields preferred, though fresh graduates are welcome to apply.
• Proficiency in English (written and spoken).
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM and a valid driver's license are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

• Job Description

1. Preparing, scheduling,coordinationg and monitoring the assigned BMS project
2. Prepare all the layout drawing, shop drawing, as bult drawing for the BMS project
3. Famillar in BACNET, MOBUS TCP,MODBUS MSTP protocal for BMS systemm
4. Able to interface modbus devices such as power meter,water meter, Themostat,HMI,and much more for the BMS system
5. On-site testing and commissioning of sensurs or meters
6. BMS programming development, Graphical user interface (GUI) for the BMS
7. Experience for onsite equipment trobleshooting
8. Able to do termination for the DDC controller

• Requirements

1. Diploma or Degree in Engineering (Electrical/ Electronics/ Automation / Building Technology).
2. Knowledge of SCADA (Niagara N4 or Mitsubishi MC Works) is preferred
3. At least 1-2 years of working experience in the related fileld is required for this position
4. Proficient in Microsoft office
5. Rquired language: Chines,English (in order to communicate with the engish & chinese speaking counterparts

Job Responsibilities:

• Support the Survitec global infrastructure - acting as a technical escalation point and collaboration source to our partners and vendors
• Play a key role and provide support to ongoing major programs including Network and Cloud migrations.
• Ensure that all systems are performing at optimal levels, liaising with external service providers where necessary.
• Monitoring and maintenance of the security, integrity and performance of core systems and backup services
• Compliance reporting and remediations
• Work collaboratively with the Architecture & Security teams offering input on solution designs where appropriate.
• Assist with planning and delivery of infrastructure improvements as part of a team
• Working closely with our Vendors and outsourcing partners to provide input and continuously improve service.

Job Requirements:

• Strong background in cloud computing and Azure technologies including Azure IaaS, SaaS & PaaS
• Strong working knowledge across the MS Stack including the Windows OS Family, Active Directory (hybrid), Exchange, Office, scripting and endpoint management (Intune & SCCM).
• Experience designing and implementing scalable, secure, and highly available cloud solutions
• Ability to troubleshoot and resolve issues related to Azure environments.
• Ability to troubleshoot and resolve hardware, software, network, and system issues.
• Assisting with IT projects, such as system upgrades, migrations, backups
• Excellent communication and collaboration skills
• Demonstrated ability to work effectively in a team environment
• ITIL certification or experience.

Desirable Criteria:

• Understanding in key infrastructure processes including capacity management, patch management, change management and performance reporting
• Network management including LAN & WAN technologies
• Outsourced Supplier management
• Experience of Service management desirable
• Experience ins supporting or implementing IT Security standards such as ISO27001, CE+, PCI-DSS

Position Overview:

We are looking for a motivated and skilled Mechanical Design Engineer to join our dynamic team. In this role, you will be responsible for designing, analysing and overseeing the structural integrity of mechanical systems and components for our products. These include specialty vehicles, engines and shelters. This role demands a strong understanding of mechanical design, vehicle systems, and relevant automotive and/or military standards, with a focus on ensuring high performance, reliability, and operational effectiveness.

Key Responsibilities:

· Develop and optimize mechanical designs for mechanical and automotive systems, focusing on efficiency, manufacturability, and sustainability.

· Collaborate with multidisciplinary teams, including electrical and software engineers, to create innovative solutions that meet customer needs.

· Utilize advanced CAD tools (such as SolidWorks) to create 3D models and detailed engineering drawings.

· Perform simulations and analysis to validate designs and ensure they meet performance and safety criteria.

· Create prototypes and conduct hands-on testing to gather data, evaluate performance, and refine designs.

· Participate in design reviews and contribute to brainstorming sessions to drive continuous improvement and innovation.

· Maintain thorough documentation of design processes, test results, and compliance with industry regulations.

· Stay updated on industry advancements and incorporate new technologies and methodologies into your work.

· Support manufacturing team with technical guidance to ensure smooth production processes and troubleshoot any design-related issues.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree or higher qualification is a plus.
• At least 2 years of experience in mechanical design engineering, ideally within the automotive sector.
• Proficiency in 3D CAD software (e.g. SolidWorks) and familiarity with simulation tools (e.g. FEA, CFD).
• Strong knowledge of mechanical design standards, materials, and manufacturing processes.
• Excellent analytical and problem-solving skills with a focus on innovative solutions.
• Effective communication skills, both written and verbal, with the ability to collaborate in a team-oriented environment.
• Results-driven and detail-oriented mindset with a passion for engineering excellence and continuous improvement.

Preferred Skills:

• Strong communication and teamwork skills
• Experience with automotive and/or military vehicle standards and protocols
• Familiarity with vehicle system design and testing procedures.
• Knowledge of mechanical engineering principles as they apply to vehicle systems and structures.
• Experience with project management and leadership in a technical environment.

What we offer:

· Competitive salary and benefits package

· Opportunities for career advancement and professional development

· Collaborative work environment that fosters innovation and communication

· Mentorship and guidance on best practices in automotive and mechanical design

· Opportunity to work on exciting projects at the forefront of automotive technology