• Plan and execute work plans on site.
• Prepare weekly progress reports and weekly work plan on project work.
• Work with design engineers for as-built drawings, section drawing.
• Work with purchaser to source & make orders for all materials required and purchase the required materials according to project timeline.
• Supervise and monitor workers / welders on site for installation or maintenance.
• Attend site meetings with clients / architects and authorities on project technical matter.

Requirement:-

• Minimum Dipoma and Degree in Mechanical Engineering.
• Required skill(s) MS Office, MS project, Autocad.
• Has work experience in consruction sites and project management.
• Responsible, detail-oriented and able to multi task.
• proactive team player with the ability to work independently in challenging projects and timelines.
• Possess Class 3 driving license will be an advantage.

Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Retrofit Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Retrofit Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Retrofit Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelor's in Mechanical Engineering (or) Equivalent from an accredited uni or college.
• Have a minimum 12-15 yr of experience in an Engineering Design / Analysis /Scientific / Technical Position.
• Have at least 7 yr of Control Valve and/or Safety valve Design Expertise.
• Demonstrate effective communication and interpersonal skills with the ability to work as a team.
• Have knowledge of control valve and/or safety valves including instrumentation and actuator.
• Have good understanding and experience in Valves regarding applications, Material of Construction, Non-Destructive Tests.
• Have experience with ASME B16.34 and PED, 3D design (Solid works/Ansys), mechanical design & tech writing.
• Have basic knowledge of manufacturing processes such as casting, machining, welding or cutting etc.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

SINOTCC, an Engineering, Procurement and Construction (EPC) firm specializing in PROCESS and GENERAL CONSTRUCTION, is looking for a suitable candidate to fill up the role.

- Bachelor Degree in Engineering (major in HVAC, Mechanical, Electrical, Instrumentation).

- At least 5 years experience working in the Process & Construction Industry

- Independent, hardworking and self-motivated

- Willing to travel overseas (if needed)

- Willing to work over time

- 5.5 days work week

- Salary Negotiable

Location of Work : Jurong Island

The Resident Engineer shall be the Customer’s main point of contact on site in relation to the Long-Term Service Agreement (LTSA) and shall act as a technical representative of Mitsubishi Power (MPW) in relation to operation and maintenance of the Gas Turbine Combined Cycle (GTCC) Power Plant located in Jurong Island, Singapore.

The Resident Engineer needs to have strong technical knowledge in Gas Turbine Combined Cycle Power Plant. The role requires analyzing operational data to investigate various operation problems on turbines and auxiliary systems, trouble shooting a diverse range of problems that occur during operation and/or maintenance. With the support from the Singapore office and the Service Engineering Head Office in Japan, the Resident Engineer needs to be capable of providing solutions on an urgent basis.

The Resident Engineer must have experience completing Gas Turbine Combined Cycle Power Plant outages successfully and know how to coordinate with various internal stakeholders, vendors, technical advisors and local labour. The Resident Engineer must establish and maintain good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

The Resident Engineer shall be stationed at the site in Jurong Island during normal working hours (8 hours per day, 5 days per week, excluding public holidays), and at times when there is a substantial risk of Power Train operation interruption due to problems arising from the Power Train. As the Power Plant provides essential services, in the event of an emergency, the Resident Engineer shall be required to reach the Power Plant within specific required timeframe based on the service agreement with the customer, upon activation by the Customer to support the efficient recovery of the power plant.

Technical Support

The Resident Engineer shall act as the Customer’s interface for the flow of information to and from the Singapore office and Service Engineering Head Office in Japan. Such activities include but are not limited to:

· Establishing and maintaining good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

· Responding to and resolving internal and external customer requests for technical issues concerning relevant operation and maintenance matters of the GTCC Power Plant, making use of technical product knowledge and analytical skills while adhering to sound engineering principles, standards, practices and procedures.

· Communicating with and supporting the Customer to act on Technical Information notices to improve or upgrade the plant.

· Proactively identifying potential failures, assessing and controlling operational risks with support from the 24/7 remote monitoring hub and expert support

· Proactively advising and assisting the Customer in planning and executing relevant maintenance activities and coordinating with the Customer and MPW for the preparation of planned and unplanned inspection activities.

· Analyzing, tracking and reporting monthly Reliability, Availability, and Maintainability (RAM) data and relevant KPIs for the LTSA, for the purposes of invoicing and for monitoring performance · against the contractual guarantees and obligations. If necessary, recommend corrective actions.

· Reviewing and presenting the monthly monitoring diagnostic reports to the Customer.

· Reviewing and presenting the inspection findings and outage reports to the Customer.

Maintenance Work Coordination

The Resident Engineer shall be responsible for coordinating all activities provided by MPW under the LTSA, including but not limited to:

· Collaborating with the Customer, various MPW group resources (E.g. LTSA Program Manager, Technical Advisors, Field Services, Engineering) and Local Vendors (E.g. Labour, Onsite Machining, Local Workshop or other Third Party Services) in order to achieve the common goals with the Customer including but not limiting to health and safety, environmental protection, customer satisfaction, unit availability, reliability, performance and emissions

· Presenting and discussing with the Customer the scope and the planning of Planned/ Unplanned Maintenance

· Actively contributing in maintenance planning meetings, pre-outage and post-outage meetings between the Customer and MPW, confirming repair status with Repair Facilities.

· Supporting the Customer in the selection of spare parts to be kept on stock, aiming to increase the timely availability of necessary spare parts while optimizing inventory costs.

· Helping the Customer in selecting tools and equipment required for maintenance of the Covered Equipment.

· Coordinating dispatch of Parts and Technical Advisory Services

Troubleshooting/ Failure Investigations

The Resident Engineer shall be responsible to lead and/or support the troubleshooting of a diverse range of problems that may occur during Plant operation and/or Planned or Unplanned Maintenance, with the support from the Singapore office and Service Engineering Head Office in Japan. Such activities may include but are not limited to:

· Conducting fact-finding and communicating failure data between the Customer and MPW

· Analyzing operational data to investigate various operation problems on the Power Train and Auxiliary systems and suggesting necessary actions.

· Leading or supporting root cause analysis to determine the original cause of failures that led to plant trips or unplanned maintenance.

· Investigating problems that have occurred during maintenance works and be capable of providing solutions on urgent basis.

· Summarizing findings and conclusions in clear, logical and easily understood reports for external customers or internal departments.

Pre-requisites

Education level and relevant experiences

· Diploma/Degree in a relevant engineering or technical field

· More than 10 years of proven related work experience in the Power Industry

· Previous site work experience in Long Term Service Agreements, field service or maintenance and overhaul of CCGT power plants or industrial plants rotating equipment is preferable.

· Previous customer facing experience where there is regular interaction with plant personnel to provide support and resolve problems.

Knowledge and skills

· Knowledge of Gas Turbine Combined Cycle Power Plant Equipment operations and maintenance.

· Good communication skills.

· Able to develop and write clear and concise technical instructions, reports, specifications and recommendations.

· Able to work in a multidisciplinary team with people from different cultures and nationalities.

· Good Knowledge of MS Office software (Word, Excel & PowerPoint)

· Industry standard training courses on NDT, Machinery Diagnostics, Lubrication, Automation, Quality Control, Metrology would be an added advantage.

The Process Engineer reports to the Tender & Contracts Manager and is responsible for the below:

• Review Tender Documents, sourcing for materials, suppliers and vendors to obtain and review quotes.
• Communicate and negotiate with external vendors on pricing, scope & other contractual terms.
• Assist with tender documentations preparation, cost reports and cost plans, administer and evaluate tender process and submit tender proposal reports
• Administrative duties such as preparing bills of quantities.
• Arrange/attend to tender queries and clarification meetings.
• Follow up with the Project teams on variation order or change order, assess the associated variation costs.
• Support project teams for monthly progress claims and billings.

To be successful, you would possess these qualities and skills

• Bachelor’s degree in Mechanical/Chemical Engineering or equivalent.
• Min. 1-3 years of relevant working experience in Mechanical Services.
• Proficient knowledge in understanding Isometric drawings, Piping & Equipment GA drawings.
• Experience working in Semi-con, Data Centre, Pharma or O&G Green field construction is an advnatage
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Job Description

• REs shall provide standing supervision of all civil and structural works to ensure compliance with the following authorities' requirements:
• The inspection of the bus depot involves the demolition and removal of the existing Pasir Panjang Distripark. Following this, the construction will take place for main depot building, dormitory and administration office.
• Knowledge of construction methods, materials, and safety protocols
• Supervise and monitoring of contractors’ work to ensure they are carried out in accordance with the provision in the contract document.
• To monitor the progress and assist SRE/QP on structural inspection on all Structural works according to the approved drawings issued.
• To review and supervise safety, environmental and health matters.
• Review and comment on contractor's submissions.

Job Requirements

• The RE shall have minimum three (4) years of experience as a civil engineer; and have least two (2) years shall be in supervision of works similar in nature to the Works in the Civil Contract.
• All RE shall have a diploma in the civil discipline or equivalent and be accredited by JAC of IES/ACES as QSS.

Work During Office hour

Monday to Friday: 8:30 a.m. to 5:30 p.m.

Saturday: 8:30 a.m. to 12:30 p.m. (Willing to work on rotation shifts)

Sunday and Public Holiday: 00:00 hours onwards or otherwise advised by project officer depending on LTA’s contractor work schedule.

Project Engineers manage the planning and processes of a project and delegate responsibilities to ensure the project is completed efficiently and successfully. Their day-to-day duties and responsibilities may vary depending on the type of industry, company or project they’re working on, but typically include the following:

• Conduct regular meetings with clients to ensure clarification and meet specific requirements in a timely manner.
• Delegate tasks to team members according to their individual skill sets, experience and abilities to ensure efficient completion of the project.
• Maintain budgets and make adjustments according to needs as they arise.
• Track performance and analyze the completion of key goals.
• Document and report project progress to stakeholders and clients.

Job Responsibilities

• Ensure successful and timely execution of projects
• Work with Design Department on generating Workshop Drawings (GA / P&ID / Electrical drawings)
• Conducting Factory Acceptance Test (FAT)
• Attending site vists when required
• Engagement and coordination with sub-contractors and clients on projects

Job Requirements

• Minimally possess a Diploma in Electrical Engineering
• At least 2 years of work experience in project management
• Experienced in 2D electrical design and drawings
• Positive attitude and committed to tasks dedicated
• Ability to manage multiple priorities and meet deadlines
• 5 days work week (Monday to Friday)

Qualification & Requirements

• Min 2 years working experience preferable in fabrication environment.
• Familiar with welding works, steel structure, winch, crane and zone rated added advantages
• Knowledge of ISO 9001:2008 QA system
• Software – AutoCAD, Solidworks ,MS Office
• Strong communication skills. English speaking and writing is a must
• Resourceful, independent and detail oriented
• Diploma in Mechanical Engineering or equivalent

Key Responsibilities

• Assist the department Manager(s) on project tendering including technical review, sourcing and cost estimating, project scheduling, drawings, procedures and documentation preparation etc.
• Overseeing of project execution as directed by Department manager including contract review (technical), vendors selection, costs evaluation, liaison for internal resources and supports, reply to client technical queries, prepare technical clarifications, plan and supervise project schedule , project execution and implementation, plan and implementation of corrective actions, Factory Acceptance Tests and finalization of as built documentation etc.
• Perform other ad hoc duties as assigned

Responsibilities:

• Design and produce single line diagrams of electrical/instrument system and determine the interface/termination diagrams in accordance with equipment specifications.
• Size cables and breakers LV/MV according to applicable rules and regulations.
• Review all electrical equipment, vendor’s proposals for technical accuracy and constructability
• Prepare material take off for bulk material orders of power and control cables, cable trays and ladders and various ship electrical equipment and systems according to project contract specifications.
• Prepare electrical equipment foundations/supports and room arrangement/layout, lighting layout, power/control cableway plan, power/control cables routing plan and cable schedules.
• Interface, size and design electrical equipment capacity e.g. switchboards, transformers, navigation, PABX, LAN and fire & gas systems, etc.
• Prepare electrical installation construction standard according to IEC/IEEE shipbuilding practice and international standard.
• Coordinate/execute contract specification requirements and production inputs into engineering drawing/document.
• Provide progress reporting and schedule management of engineering deliverables.
• Coordinate with other production team members, subcontractors and consultants to resolve technical issues onsite which affect the electrical schedule and project deliverables.
• Perform site visits to solve engineering problems when required to determine existing conditions or verify new construction.
• Meet with vendors, client reps, accreditation representatives when required.
• Review and reply to class comments
• Perform any other tasks as may be assigned by the supervisor
• Ensure compliance to relevant government regulations and company’s quality, safety, health and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum 3 years of relevant experience working in a marine/offshore industry either with shipyards or marine equipment manufacturers and a Diploma in Electrical Engineering or related engineering discipline or minimum 6 years of experience working in a marine/offshore industry either with shipyards or marine equipment manufacturers.
• Familiarity with Marine & Offshore rules, regulations and requirements.
• Knowledge of Intergraph Software will be an added advantage.
• Good communication skills, meticulous, resourceful, able to multi-task

RESPONSIBILITIES
Able to utilize advanced skills to perform complex preventive maintenance and corrective repair of buildings, industrial systems, vehicles, equipment and grounds. Working under limited supervision, monitors building system operations and performance. Utilizes several trade skills such as carpentry, plumbing, electrical, painting, roofing, heating and cooling.Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Inspects building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.

Oversees and inspects the work performed by outside contractors. Contracted work includes landscaping, snow removal, remodeling, HVAC, plumbers, and cleaning.

Performs assigned repairs, emergency and preventive maintenance. Completes maintenance and repair records as required.

Reviews assigned work orders. Estimates time and materials needed to complete repair. Orders necessary materials and supplies to complete all tasks.

Maintains an energy management program to ensure measures are taken to operate all systems in the most efficient manner to keep operating costs at a minimum.

Maintains the building lighting system, including element and ballast repairs or replacements.

Performs welding, carpentry, furniture assembly and locksmith tasks as needed.

Responds quickly to emergency situations, summoning additional assistance as needed.

Performs other duties as assigned.

- Provide support to operations maintenance staff in their work flow, maintaining, repairing and installation of HVAC units and Refrigeration systems. (Main tasks of the job scope)

- Mechanical general work

- Other ad-hoc duties as assigned

Job Requirements:

- Monday to Friday, 8am to 5pm

- Saturaday, 8am to 12pm

- Must be able to support OT on weekdays / weekends if needed

Interested applicant, please resume to [email protected]

Project Engineer

This role is a newly expanded role for a European MNC who is a APAC leader in industrial and material handling products, services, and solutions for various application such as automated warehousing, building maintenance, automotive and others. Come join this role and be part of the active players in this growing industries

Key Roles and Responsibilities

· Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.

· Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.

· Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.

· Manage day to day project activities including scheduling, coordinating and monitoring and reporting update of projects

· To supervise the execution of the works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document

· To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.

· Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist in verifying progress payments and claims from Contractors.

· Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule

· Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.

· Be the primary focal point between various parties

Qualifications & Experience

· Diploma or Bachelor’s Degree in Electrical Engineering/Electronics/Control Systems Engineering or related disciplines

Preferred Skills & Characteristics

· Self-starter and ability to self-manage strong interpersonal and leadership skills

· Must have high level of integrity, able to generate trust and build alliances with co-workers

· Familiar with Job Safety Analysis, Work Method Statement and Permit to Work application requirements and procedures

· Ability to maintain good project documentation and is familiar with ISO documentation requirements

· Safety certifications such as Working at Height, Construction Safety Orientation Course etc. is advantegeous

· Basic knowledge on Industrial Control Real Time Systems such as PLC/SCADA/IoT

· Additional skills in AutoCAD, Revit and Microsoft Office are advantageous

If you are keen to apply for this role, please click auto-apply

HRLinked Asia Search & Consultancy Pte Ltd (Registration No: 201910702W)

Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

5. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them

6. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.

7. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

Responsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTOResponsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

· Degree in Civil/Structural Engineering (recognized by Singapore PE Board)

· Minimum 2 years’ of precast experience in commercial and condo building projects

(A) JOB DESCRIPTION:

For the assigned project, assume overall responsibility for inspecting and assessing the quality and reliability of welding work, including but not limited to the following:

1) Perform inspection to ensure all fabrication work is done according to required specification, procedure, and applicable standards.

2) Conduct welding and welder procedure qualification testing and prepares report & record as per relevant specification and code.

3) Reviewing material/weld traceability records.

4) Inspections on Piping fabrication / Installation prior to pressure testing, witnessing pressure testing.

5) Understand all technical specification and standard compliance.

6) Handle troubleshooting project correction.

7) Carry out inspection of all the welding and related actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.

8) Recommend approval of the work inspected (in compliance with the Contract Plans and Specifications).

9) Any other ad-hoc duties and responsibilities as assigned.

(B) REQUIREMENTS / QUALIFICATIONS:

1) Degree in Mechanical or Metallurgy.

2) Possess a valid welding inspector certificate (AWS or CSWIP)

3) At least 2 years working experience in welding inspection of structural, piping fabrication and welding jobs (including NDT).

4) Sound knowledge of structural fabrication, piping isometric drawing and materials

5) Good written and communication skills, to interact with people of all levels and teamwork

6) Those with practical experience in the Process (Oil & Gas) industry will have added advantage.

Job Description

• Oversee the smooth and efficient operation of inorganic chemicals' production
• Evaluate customers' orders with Team Leader and create production schedules to meet deliverables
• Oversee the planning and ordering of Anhydrous Ammonia (skid tanks/cylinders)
• Keep track of NH3 and NH4OH Performance Matrix and account for deviation/breaches captured by the matrix
• Supervise the manufacturing processes are done in a safe and efficient manner
• Oversees and assess the existing processes, workflows and optimizes them through designing, implementing and testing new procedures
• Conduct R&D work for new product/process
• Ensure all production and testing records are properly verified and documented
• Compiling status, performance reports and submitting them to management in a timely manner
• Diagnose problems in the production line and provide recommendations, solutions and necessary training
• Formulate yearly maintenance plan and ensure all maintenance activities in the plant are appropriately carried out
• Ensure all inspection and certification of all pressure vessels are done and properly recorded
• Assignment of delivery escorts to the respective clients and qualification of the delivery escorts
• Review the delivery escorts competency and make appropriate changes
• Ensure safe working environment within the production area
• Perform inventory checks on a monthly basis
• Administer the ISO 9001:2015 system
• To lead on sites ammonia project (eg purging/charging) which includes project planning and execution. These projects entail certain risks and danger during emergency response mitigation and rescue operations
• Demonstrate and encourage a disciplined approach to compliance in all elements of the Company policies, processes and procedures
• Ensure outgoing product meet customers' requirements and specifications
• Review and generate Risk Assessment for all tasks
• Review and generate Safe Work Practices (SWP) for all tasks
• Conduct safety training for the NH3/NH4OH related process to technicians/operators/escorts
• Respond to customers' queries relating to safety, quality and deliverables
• Raise Correction Action Request (CAR) to problematic vendors
• Foster a respectful and collaborative work environment with all co-workers and vendors
• Respond to off hours critical calls to resolve facility/equipment issues
• Sourcing, review and purchase of Ammonia related equipment, accessories and spares
• Any other duties and responsibilities as may be assigned by the superior or Management

Job Requirements

• Candidate must possess at least Bachelor's Degree in Engineering (Chemical) or equivalent
• At least 5 years of working experience in the related field
• Preferably Executive level specialized in Engineering - Chemical or equivalent

An established chemical manufacturing company in Jurong has an immediate vacancy for:

PRODUCTION ENGINEER

The Job

· Effective management of the production operations.

· Ensure effective and efficient use of materials, manpower, machines, and equipment so as, to minimize wastage, reject downtime, and reworks.

· Implement quality, safety, and environmental policies to comply with company and statutory regulations.

· Continually seek to improve productivity by recommending and initiating policies, procedures, and methods.

· Meet or exceed customer requirements, not limited to quality standards and delivery.

· Performs other duties as assigned.

Requirements

· Degree/Diploma in Chemistry or Chemical Engineering

· 2 – 3 years relevant experience in chemical manufacturing.

· Working knowledge of ISO, OHSAS, and Halal standards.

Interested applications are to e-mail your detailed resume indicating present and expected salary to :

The Advertiser

e-mail: [email protected]

Only shortlisted candidates will be notified.

SMARTr International Pte Ltd is looking for a Sales Engineer to join our team.

Key Responsibilities:

• Work closely with the Engineering Sales Manager.
• Possess technical knowledge in mechanical engineering.
• Provide technical consultation and support to customers, understanding their requirements and offering suitable solutions.
• Prepare and deliver technical presentations, proposals, and product demonstrations.
• Provide sales support and assist in troubleshooting technical issues.

Fresh gratuates with Diploma in Mechanical Engineering or gratuate from ITE, Polytechnic are welcome to apply.

Working Days: Monday - Friday

Working Hours: 8.30am - 6.00pm

13th month bonus

Responsibilities:

• Site preparation and co-ordination, preparation of submission documents.
• Coordinate, liaise and manage various project stakeholders including customers, consultants, sub- contractors, vendors, etc. on site to ensure project requirements are met.
• Able to communicate effective to all stakeholders.
• Prepare and create detail work schedule, manpower and resource planning.
• Able to understand Engineering drawings and perform basic engineering calculations, design, etc.
• Coordinate the safety management system on site.
• Follow up and reporting on the project progress.
• Able to understand Singapore standards or Code of Practice.
• Ensure all site execution with valid approved drawing, Architect Instruction, Engineer Instruction, Written Instruction from client/ main contractor representative.
• Carried out assignment as detailed by the Senior Manager / Project Manager / Assistant Project Manager.

Requirements:

• Candidate must possess at least Diploma/Advanced/Higher/Diploma/ Degree in Electrical & Electronic in any engineering field or equivalent.
• Min. 2 years relevant experience in the Construction Engineering industry.
• Proficient with computer technology and Microsoft Office application (MS PowerPoint, Excel, Project)
• Knowledge in AutoCad, Revit, Naviswork, BIM360 or other design software with strong understanding of Drawings
• Fluent in English, both written & spoken and able to communicate with all levels of team members
• Independent, resourceful, pro-active and team player in a fast-paced environment.
• Possess good organization, planning, strong interpersonal, communication skills and project management skills
• Ability to work under tight deadlines
• Ability to interact effectively with project members and managers at all levels.
• Experience in MV / LV Electrical Equipment (Site Installation, Testing and Commmissioning, Maintenance Testing) will be an added advantage.

1. Closely supervises and monitors the work with the Project team to ensure that the project proceeds according to the contract and deals with any queries, problems and claims that might arise.

2. Coordinate with client for the project interface activities.

3. Interpret Construction and Technical Drawings.

4. Involved in all site meetings.

5. Liaise with site HSE personnel to ensure corporate policies, practices and procedure one met.

6. Managing project deliverables in line with the project plan.

7. Managing project scope and change control with commercial or without commercial impact.

8. Monitoring project progress and performance.

9. Plan monthly works schedule and set productivity to be achieved.

10. Prepare MSRA

11. Progress Claim and monitor invoice status

12. Project Planning, Progress Reports and Claims.

13. Providing status reports to the management.

14. Review and monitor construction activity schedule including the analysis of costs, progress and other productivity data.

15. Supervise/review/prepare all final reports including as built drawings, material reconciliation, close out, etc. relating to the assigned project

16. Technical evaluation of vendor quotation.

17. To initiate and undertake action to prevent the occurrence of non- conformity.

18. To instill ownership priority & timely manner at our culture to work safe and achieve higher quality.

19. To lead and control the workmen to carry out task for installation, fabrication, testing and commissioning of process plant electrical and instrumentation.

20. To monitor the progress of projects against planned

21. To plan, monitor and ensure manpower, materials, equipment and tools are ready for day-to-day work activities.

22. Update and report daily progress status and lookahead minimum 3days plan.

23. Working closely with main contractor and client to ensure the project meets the required needs.

Job Description
To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.

• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring, and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials, and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements.
• Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Job Requirement

• Degree in with degree in Civil, mechanical or equivalent
• At least 1 - 2 years relevant experience in construction site
• Prior experience in Refinery / Process Plant on Civil and/or Mechanical projects execution will be advantageous

Job Scope

• Manage and execute project in cost effective, on time delivery with quality standards to meets client expectations;
• Managing the projects in accordance to our Company’s ISO 9001, ISO 14001 & OHSAS 18001 Standards and contractual requirements;
• Pre and post-contract stages from vetting tender documents, organizing tender activities as well as settlement of accounts with owner, sub-contracts / suppliers;
• The development and implementation of project management plans through the provision of project scheduling, monitoring, reporting and forecasting, ensure that safety regulations are complied;
• Providing and preparing all scheduling, budgeting and specification for the project work;
• Check drawings and quantities and ensure that the calculations are accurate for the project implementation;
• Carry out project planning, cost control, project management and documentations;
• Provide the direction in construction planning, coordinate work with other departments, sub-contractors, clients and consultants to ensure overall construction progress as scheduled;
• Liaise and assist in submission of all necessary permit, license to all relevant authorities for the project work;
• Attend meetings, correspondences and liaise with clients, sub-contractors and suppliers;
• Resolve design and site problems encountered during the construction period;
• Plan and manage actual and post construction issues with the clients, consultants, sub-contractors and relevant authorities;
• Ensure proper documentation of the project, such as record correspondence, as-built drawings, etc..;
• Close supervision of work carried out by sub-contractors and suppliers to ensure adherence to project schedule;
• Ensure highest quality on the work carried by the sub-contractor, fabricators and suppliers;
• Liaise with consultants, clients, sub-contractors and suppliers on the implementation of the projects;
• Check on the progress claim submitted by the sub-contractors;
• Monitor, track, report project progress, supervise Engineers, Supervisor, Technicians and sub-contractors’ on site;
• Follow-up on the defective work and ensure timely rectification by contractors, fabricators and suppliers;

Job Requirement

• Recognized Degree by BCA in Civil Engineering.
• Experience in Civil Engineering Projects, especially in Marine Construction of Jetty, Wharf, Harbour, Dredging, etc.