Introduction:

The Energetix Sustainability Suite is an Enterprise IoT platform using AI to integrate sensor data streams and intelligent controls to perform Energy Monitoring, optimise Lighting, Plug Loads and ACMV, manage Air Quality, Occupancy and Data Centre Infrastructure. Our customers have reduced energy consumption by up to 40%.

We are looking for a candidate passionate about reducing carbon emissions in the built environment through intelligent energy management.

Job Description:

• Overall responsible for all aspects of the project implementation lifecycle. Plan, coordinate, and execute IoT deployments to help digitalize the built environment, including the site assessments, installation and configuration of devices and sensors to monitor and optimize energy consumption. Collaborate with multidisciplinary teams, including software engineers, data analysts, and facility managers, to design and implement effective monitoring and control solutions. Provide field technical support and maintenance for projects, working closely with Helpdesk to troubleshoot and fix site related issues. Document project progress, findings, and recommendations for continuous improvement.
• Analyze and interpret data collected from IoT devices to generate actionable insights for clients and stakeholders and to feed AI engines. Provide technical support and training to clients and end-users on the operation and maintenance of IoT systems. Instrumentation / IoT Devices will include electrical meters, BTU meters, IAQ Sensors, Controllers and various types of sensors and controllers as well as interfacing with Building Management Systems and PLCs.
• Work closely with Account Managers, Consultants and Contractors to engage customers, drive understanding of our solutions, influence tender specifications, qualify and perform demos and POCs and Pilot projects.

Job Requirements:

• Degree or higher in Building, Civil/Mechanical/Electrical/Computer Engineering, Computer Science, Electronics or equivalent.
• At least 5 years of Engineering/IT experience, preferably in Building Services or Industrial Automation with good knowledge of automation, PLCs, SCADA, Building Management Systems, M&E systems, RTU devices and networking equipment.
• Good interpersonal and communication skills, passionate about technology, capable of working independently, and highly organized with strong attention to detail.
• Willing to travel within Singapore and Johor Malaysia.

• 5 Working Days
• 9am - 6pm
• $3200 - $4000 + VB
• Mattar

Job Objective:

Work closely with manufacturers and Engineers to implement and service audio visual and video conferencing solutions in accordance to company’s standards and best practices to meet customer’s requirements

Job Description:

• System configuration, Testing & Commissioning of Integrated Audio Visual and Videoconferencing solution.
• Conduct end user trainings to end users on how to use the Solution(s) implemented.
• Work closely with in house AV Designers and Engineers from different manufactures like Samsung, BOSE, Crestron, Extron, Poly, Logitech, etc to implement full integrated solutions for venues like meeting room, lecture room, experience centre, command centre, auditorium, ballroom, etc
• Study the schematic drawings to understand the technical & functional requirements to implement each solution
• Assist in after sales services

Requirements:

• Must have minimum 2 years of experience in System configuration, Testing & Commissioning for Audio Visual solution.
• ITE/ Diploma in IT/Engineering/Audio Visual
• Must possess the certifications of Crestron CTI-P101, CTI-P201, Extron Control Professional (ECP), Extron Authorized Programmer (EAP), Kramer Control System Designer (301), Kramer Control System Programmer (302), Dante Level 1 & 2, Cisco CCNT, CCNA
• Experience in some of the products like Videowall, LED & LCD Display, Digital Sound Processor (DSP), Amplifier, Speaker, videoconferencing, Audio Visual Switches.
• Experience in similar renowned AV brands like Samsung, Crestron, Extron, BOSE, Ev, Poly, Cisco, Logitech, etc
• Experience in Crestron, Extron, AMX, Kramer automation programming will be an added advantage
• Experience in DSP programming will be an added advantage

Interested applicants can send your resume to Whatsapp 89503567 (Jennifer) and allow our consultant to match with our clients.

Jennifer Tay

R22111564

The HR Ecology Pte Ltd

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

About EPAM :

EPAM is a leading global provider of digital platform engineering and development services. EPAM has been expanding in Singapore since 2013 and delivering the best solutions to our customers. As a recognized leader, EPAM Singapore achieved Great Place to Work® Certification in 2023 and is committed to providing our team with inspiring careers. You will have the opportunity to work with fellow talented technologists and accelerate your career by participating in our numerous upskilling, training, and certification programs. That is why EPAM Singapore was awarded Gold for Best In-House Certification Programmes in the Employee Experience Awards 2023 and Silver in the SkillsFuture Employers Awards 2022 for our efforts in championing employees' skills development and building a lifelong learning culture at the workplace. You can also look forward to developing holistically with the multiracial festivals and various wellness and cultural activities organized by our passionate colleagues here.

Why EPAM?

· By choosing EPAM, you're getting a job at one of the most loved workplaces according to Newsweek 2022 & 2023.

· Employee ideas are the main driver of our business. We have a very supportive environment where your voice matters.

· You will be challenged while working side-by-side with the best talent globally. We work with top-notch technologies, constantly seeking new industry trends and best practices.

· We offer a transparent career path and an individual roadmap to engineer your future & accelerate your journey.

· At EPAM, you can find vast opportunities for self-development: online courses and libraries, mentoring programs, partial grants of certification, and experience exchange with colleagues around the world.

You will learn, contribute, and grow with us.

What you'll do :

Conduct reviews for compliance of the ML models in accordance with overall platform governance principles such as versioning, data / model lineage, code best practices and provide feedback to data scientists for potential improvements

· Develop pipelines for continuous operation, feedback and monitoring of ML models leveraging best practices from the CI/CD vertical within the MLOps domain.

· Optimize AI development environments (development, testing, production) for usability, reliability and performance.

· Have a strong relationship with the infrastructure and application development team in order to understand the best method of integrating the ML model into enterprise applications (e.g., transforming resulting models into APIs)

· Work with data engineers to ensure data storage (data warehouses or data lakes) and data pipelines feeding these repositories and the ML feature or data stores are working as intended

· Evaluate open-source and AI/ML platforms and tools for feasibility of usage and integration from an infrastructure perspective

· Staying updated about the newest developments, patches and upgrades to the ML platforms in use by the data science teams

What Will Make You Shine :

· Minimum 10 years of hands-on experience as an ML Engineer, specializing in Python, ML libraries (e.g., Pandas, NumPy, TensorFlow, H2O), and large-scale data processing frameworks (e.g., Hadoop, Spark, Dask)

· Advanced proficiency in Python for both ML development and automation tasks.

· Strong understanding of cloud platforms (AWS, GCP preferred) and container orchestration (OpenShift/Kubernetes)

· Extensive experience in building and maintaining CI/CD pipelines (Jenkins, GitLab CI, GitHub Actions)

· Solid grasp of MLOps principles, including model operationalization, monitoring and scaling (experience with Kubeflow, Sagemaker, etc. is a plus)

· Proficiency in workflow orchestration (Airflow, Ctrl-M), logging & monitoring (Splunk, Geneos) as well as bash scripting and Unix/Linux command-line tools

· Experience in establishing and refining AI/ML development processes, standards and toolsets

How We Hire Here,

we summarize the typical journey to finding a job within EPAM:

1. Apply and tell us about yourself

2. Go through some standard interviews:

·General interview with a recruiter

·Technical interview with our technology experts

· Manager interview or Offer interview with a hiring manager

3. Get ready to join the team Not sure if you meet all the requirements?

No problem. Let’s talk anyway and find out more.

It takes 1 min of application to start the journey with us. Apply now!

Join our global team to help design, implement, improve, and operate our worldwide Internet Breakouts as well as the VPN Services for Bosch Users and partners. Ensure that the security infrastructure deployment and configurations align with industry standards, compliance requirements, and organizational security policies. Provide Level-2/Level-3 Support for our service portfolio, including shared on-call duty (remote). Collaborate closely with our Architects, Engineers, internal customers, partners, and stakeholders. Initiate, manage, and implement changes to our security infrastructure.

Responsibilities:

• Design, implement, and operate worldwide Internet Breakouts and VPN Services for Bosch Users and partners.
• Ensure security infrastructure deployments and configurations comply with industry standards, organizational policies, and compliance requirements.
• Provide Level-2 and Level-3 support for the service portfolio, including participation in shared on-call duty (remote).
• Work closely with Architects, Engineers, internal customers, partners, and stakeholders.
• Initiate, manage, and implement changes to the security infrastructure.

Job Description

• Industry/ Organization Type: Manufacturing/ Production (Precision Engineering)
• Position Title: Procurement Engineer
• Working Location: Kaki Bukit
• Working Hours: 5 days (Mon – Fri, 8am – 5.30pm)
• Salary Package: Up to $4,500 + AWS
• Duration: Permanent

Key Responsibilities

• Report to Operations Manager.
• Obtain quotations and purchase raw materials, components, and assign secondary processes to subcontractors.
• Update approved machining subcontractor quotations in the system.
• Issue and manage Work Orders and Purchase Orders.
• Source materials, components, and plating for cost reduction.
• Perform evaluations for company purchases and assist with assigned duties.
• Collaborate with the group sourcing team on procurement evaluations.
• Develop and manage the Supply Chain Management plan.

APPLY NOW!!!

• At least Diploma in Mechanical Engineering with 1 year of related working experience. Preferably from the Manufacturing industry.
• Proficient in Microsoft Office is a must.
• Experience with CRM tools (such as Salesforce) would be beneficial.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71172 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

If you are a Sales professional looking to grow your technical sales know-how, then Emerson has a great opportunity for you! Based in Singapore, the Senior / Sales Engineer will plan, and drive accounts assigned to grow the Valve business in Singapore.

In this Role, Your Responsibilities Will Be:

· Provide sales forecast and achieve/exceed bookings, sales, and profitability targets set for the Business Unit’s business in Singapore.

· Tap on prospects, analyze requirements to develop winning strategies, and negotiate to win the business profitably.

· Maintain excellent accounts and build strong relationships with external customers and the internal sales and service team.

· Collaborate with Inside Sales team for technical support, and generate winning proposals for order processing, project team, and documentation including post-sales service with the Service team and various departments within the organization.

· Proactively promote regulators and pressure safety relief valve products and service solutions by using marketing programs, maximizing field resources.

· Lead and build on internal sales team relationships and bring in Product Sales Specialists to assist in value proposition.

· Understand customer needs to uncover additional opportunities within accounts across all products and service solutions.

· Strong and keen sense of hunting and developing new opportunities/new customers.

Who You Are:

You effectively communicate in various settings: one-on-one, small and large groups, or among diverse styles and position levels. You build rapport in an open, friendly, and accepting way. You draw upon multiple relationships to exchange ideas, resources, and know-how. You understand that different situations call for different approaches. You position views and arguments appropriately to win support.

For This Role, You Will Need:

· Good communication/interpersonal skills and strong negotiation skills.

· Good in analytical, questioning and possess good critical thinking skills coupled with the ability to develop and implement strategies.

· Mature and independent while having strong team spirit with internal stakeholders.

Preferred Qualifications that Set You Apart:

· Degree/Diploma in Engineering (Mechanical, Chemical, Instrumentation, Automation) with 3-5 years of sales experience in marine, oil & gas, petrochemical & chemical industry.

· Proven experience in technical sales, preferably in the valves business would be an added advantage.

Please submit your application on or before 31 December 2024.

Our Offer To You:

By joining Emerson, you will be given the opportunity to make a difference through the work you do.

Emerson's compensation and benefits programs are designed to be competitive within the industry and local labor markets. We also offer a comprehensive medical and insurance coverage to meet the needs of our employees.

We are committed to creating a global workplace that supports diversity, equity and embraces inclusion.

We attract, develop, and retain exceptional people in an inclusive environment, where all employees can reach their greatest potential. We are dedicated to the ongoing development of our employees because we know that it is critical to our success as a global company.

We have established our Remote Work Policy for eligible roles to promote Work-Life Balance through a hybrid work set up where our team members can take advantage of working both from home and at the office.

Safety is paramount to us, and we are relentless in our pursuit to provide a Safe Working Environmentacross our global network and facilities.

Through our benefits, development opportunities, and an inclusive and safe work environment, we aim to create an organization our people are proud to represent.

Our Commitment to Diversity, Equity & Inclusion

At Emerson, we are committed to fostering a culture where every employee is valued and respected for their unique experiences and perspectives. We believe a diverse and inclusive work environment contributes to the rich exchange of ideas and diversity of thoughts, that inspires innovation and brings the best solutions to our customers.

This philosophy is fundamental to living our company’s values and our responsibility to leave the world in a better place. Learn more about our Culture & Values and about Diversity, Equity & Inclusion at Emerson.

If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: [email protected].

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Contribute to Life Science projects for Antaes Asia clients
• Review and familiarize with Automation systems used on site.
• Execute and review SAT protocol/reports.
• Assist Automation Engineer in commissioning.
• Support Engineers in documentation (SOPs, Work Instructions, Risk Assessments etc).
• Assist Engineers in creating and reviewing maintenance procedures / maintenance plans.
• Support Automation System PQ.
• Provides trouble shooting / continuous improvements to processes / systems. Maintain high GMP standard meeting the regulatory expectations such that the site is always inspection ready.
• Monitor and enforce compliance measures (including Data Integrity and safety) within their specific discipline to ensure inspection readiness of plant, as well as participate as an audit team member in the conduct of audits.
• Monitor and manage the DCS/PLC systems to ensure constant and reliable support to the plant at all times so as to minimize disruption to the production process.
• Contribute to the promotion of Antaes services on top of assistance provided to clients

Requirements

• 5-10 years’ experience as Pharma Engineer with Controls experience in the process / pharmaceutical industry
• Experience in Delta V system, especially batch process.
• Experience in SIL calculation and TMR system (Honeywell Safety Manager) will be added advantage.
• Experience in the Siemen PLC system will be added advantage.
• Good understanding of validation process, calibration and preventive maintenance.
• Familiar and understanding of Global Engineering Standard (GES) and understanding of industrial standards.
• Effective communication & Operational Excellence skills.
• Show high level of initiatives.
• Knowledge in Alarm management system, LCS ( Local Control Station ) with push buttons, selector switch, ammeter, voltmeter and emergency stop. FRP enclosure with ingress protection, PEMS (Portable Emissions Measurement Systems), Building management system, Urgency system & Commission automation system

The successful candidate will be onboarded in the Platform and Cloud Hosting team which:

• Deploys, supports and maintains global Private Cloud infrastructure (compute, storage, software defined network, etc.)
• Advises internal partners on how to leverage the Cloud – Private or Public – to increase the delivery of business value
• Guide and assist our application team to adopt our cloud native technologies
• Work closely with regional and global teams to support on the platform

Job Description:

• Contribute to projects for Antaes Asia clients
• Install, configure and support cloud platform underlying resource plane and control plane infrastructure (hardware and software components)
• Releasing projects and maintenance operations in production without impact
• Be a technical reference for internal partners and advise on standard Cloud practices or innovative solutions to bring value to a competitive and challenging market environment
• Structure and guide our internal partners through their Cloud-Journey, accelerate the adoption of Cloud technologies and best practices, and provide consolidated reporting across the organization
• Create technical content such as reference apps, starter kits and patterns and practical guidance that will get our developers excited about the potential of the Cloud
• Represent the team in various regional and global forums where technical expertise is required
• Be a technical reference and mentor for the team to increase their knowledge about software development & cloud patterns
• Contribute to the promotion of Antaes services on top of assistance provided to clients

Job Requirements:

• Bachelor’s degree in Computer Science, Computer Engineering or equivalent
• Passionate about learning new technologies, sharing knowledge, and solving complex challenges
• Strong automation mindset with little tolerance for repetitive work.
• Fluent English is mandatory and excellent communication is a must
• Strong experience with Linux-based Operating System, OpenStack, CEPH, Docker
• Experience with commodity hardware (Dell, HPE, etc.)
• Experience with Kubernetes (or other container technologies) and Databases (PgSQL, NoSQL, etc.)
• Experience with Object Storage (Scality, EMC ECS, etc.), File and Block Storage (Pure, NetApp, EMC, etc.)
• Hands-on experience with Infrastructure automation through CI/CD, DevOps tooling like Python, Puppet, Ansible, Terraform, Git, Github Actions, etc.
• Knowledge in Public Cloud CPs is a plus (Azure, AWS, etc.)
• Exposure to and interest in Cloud technologies
• Well organized, self-motivated, enthusiastic, fast learning, growth mindset
• Team Player and Collaborator with excellent communication skills

As a fast-paced, growing business; this role will be responsible for significantly contributing to projects to deliver excellent service levels to clients and assist in the ongoing development and growth of the business, whilst providing sound technical, design and contract management support.

They should comply with B&W Engineering’s standards, procedures, process and implementations to ensure project requirements and clients’ specifications are fully met. Have the ability to demonstrate extensive experience in a wide range of technical areas and have a sound level of knowledge at Senior Engineer level.

Desirable experience would include the management of Data Centre projects..

Role Responsibilities and Requirements

Degree or higher in appropriate engineering discipline or have sufficient equivalent experience.

IES Electrical and Electronics Engineering Professional Membership desirable.

Singapore Professional Engineer registration or progress towards beneficial.

Proven experience in working within and running projects within a multi-disciplinary team with the successful delivery of the design for critical projects.

Experience in project management and MEP engineering track record with some experience of data centres or other critical engineering facilities.

Knowledge of MS Office applications Outlook, word, excel, PowerPoint etc

Knowledge of Dialux, Trimble (Amtech) Etap /AutoCAD/Revit/ BIM/CAD calculation software.

Ability to use IT based calculation and spreadsheet software.

Significant experience in production of drawings, calculations, schedules & specifications for a range of building types

At least 5 years overall experience with 3 years Data Centre design

Broad design experience across Commercial, High Rise, Hotels & Leisure would be beneficial

Demonstrate a thorough understanding of the design process.

Peripheral experience in architecture, structures, civils, security and permitting.

Excellent understanding of the various code requirements and standards across the APAC region.

Sound knowledge of key Health and Safety issues and legislation including Singapore Design for Safety (Dfs)

Ability to keep clear and accurate records and reports.

Understand and maintain the long-term goals of the business.

Understand the company QA process, maintain and contribute to the same standards across the APAC region

Ability to work autonomously, as part of a wider team.

Ability to embrace an intensively collaborative design environment working for and reporting daily to an expert client.

Ability to proactively step outside the role of conventional design regiment and stages to achieve the client’s deliverables.

Flexible and willing to travel to service international projects and customers.

Possess exceptional clear communication skills and command of spoken/written English.

Have an appreciation of different cultures/races and embrace the same.

Be a motivated, highly dependable

Maintain an appropriate knowledge of industry initiatives.

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

Responsibilities:

· To prepare commercial and technical proposals for tenders / enquiries from local and overseas clients.

· Carry out municipal and industrial wastewater treatment process design and calculations, especially for biological treatment process.

· Able to generate P&ID and general arrangement layout drawings for proposed system.

· To specify process equipment/instrument/bulk materials for price sourcing from vendors.

· Able to work out complete detail costing for projects.

· To meet with customers on any technical clarifications or system presentation.

· Other ad hoc duties as assigned.

Qualifications and Education Requirements:

· At least 3 -5 Years of working experience in the water and wastewater field (with Design and Proposal role).

· Candidate must possess at least Bachelor’s Degree/ Post Graduate Diploma/ Professional Degree in Mechanical Engineering/ Environmental Engineering.

· Proficient in AutoCAD and Microsoft Office software.

· Fast learner and able to cope in a fast paced environment.

Please indicate your current and expected salary in your resume.

• Possess a deep understanding of network protocols, risk management, security standards, and regulatory compliance.
• Analyze network traffic patterns, identify bottlenecks, and track performance to proactively address issues and optimize network efficiency.
• Actively participate in network audits and collaborate with stakeholders to ensure the Bank's APAC network adheres to bank rules and regulatory guidelines.
• Establish and enforce network operational procedures, supervise the Network Operations team, review KPIs, and ensure SLAs are met.
• Manage vendors and service providers, including MSAs and SAs, to optimize service reliability and cost-efficiency.
• Coordinate with cross-functional teams on network planning and service-related matters, such as DR drills, third-party risk management, asset management, lifecycle management, privilege access management, and patch management.
• Oversee the design and architecture of the network to ensure scalability, reliability, and security.
• Possess a strong understanding of network budget planning, including Capex and Opex.
• Develop and maintain network performance reports for management review.

Qualifications:

• Bachelor's degree in Computer Science, Information Technology, or a related field with at least 5 years of experience as a Network Operations Lead or Senior Network Engineer.
• Minimum of 8-10 years of experience in network planning, design, and implementation.
• CCNP/CCDP, ITIL, or equivalent certifications. CCIE certification is preferred.
• In-depth knowledge of network protocols, risk management, security standards, and regulatory compliance.
• Proven hands-on experience in network deployment for large enterprises and data centers.
• In-depth knowledge of IP routing, switching, BGP, OSPF, SD-WAN, QoS, and VPC.
• Proficient with Cisco, Fortinet, Checkpoint, F5, or equivalent network devices.
• Proven ability to work effectively with cross-functional teams.
• Prior experience in the banking or financial industry is advantageous.
• In-depth knowledge of IP routing, switching, BGP, OSPF, SD-WAN, QoS, and VPC.
• Strong technical writing and documentation skills.
• Excellent written and verbal communication skills, capable of presenting to both technical and non-technical audiences.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24981

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Responsibilities

• Manage the project site by overseeing the day-to-day activities related to the construction of the project as designated by Project Manager
• Liaise with consultant for technical issues and coordinate the site activities with subcontractors
• Conduct inspection and checks on work performed by subcontractors
• Assist in the planning and sequencing of the construction operations
• Prepare project-related reports and method statement for submission

Requirements

• Degree in Civil Engineering recognized by PEB or qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer, or recognised Degree in the relevant field subject to the acceptance of the Engineer, and at least 3 years of experience in the construction supervision for projects of similar scale and complexity.
• Minimum 5 years relevant experiences in Engineering and construction industry
• Experience with LTA Project is an advantage, working area nearby Boon Lay MRT.

Job Description

· Co-ordination and supervision of M&E works

· Liaise with M&E Consultants

· Ascertain and make provision for all M&E and building services in collaboration with the project staff

· Monitor progress, quality of workmanship and compliance with authority requirements.

· Highlight and advise the project staff on the interfacing of M&E services and the building works

· Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission

· Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission

· Attend to technical clarifications as and when required to address technical issues and establish method statements

· Project Management and sites supervision works.

· Able to coordinate with contractors and consultants for engineering issues and drawing plans.

· Perform all duties in accordance with company policies, processes, systems and procedures.

. Working location nearby Boon Lay MRT.

Job Requirements:

Minimum five years of engineering experience with Degree in Civil Engineering recognised by the PE Board or qualification acceptable to the Commissioner of Building Control and eligible for application as a Resident Engineer or Recognised Degree in the relevant field subject to the acceptance of the Engineer, and at least three years of experience in the construction supervision for building projects with basement structures.

Responsibilities

• Collaborate with the production and planning teams to prioritize tooling schedules based on the current tool status and production demands.
• Provide technical support to the tool designing and sales teams, ensuring that customer requirements are met through effective tooling solutions.
• Take a leadership role in problem-solving and troubleshooting within the tooling team, identifying root causes and implementing corrective actions.
• Support continuous process improvements for tooling and work processes to enhance productivity and efficiency across the department.
• Work closely with the toolroom to identify machining needs for tooling modifications and improvements, ensuring tool readiness for production requirements.
• Oversee and guide the toolmakers, training them to enhance their skills and ensuring high-quality standards are maintained in all tooling activities.

Requirements:

• Diploma in Precision Engineering or equivalent.
• Technical qualification in Tool & Die Making or a related field.
• Ability to lead and manage a team, fostering collaboration and continuous improvement.
• Strong problem-solving skills with experience in root cause analysis and troubleshooting.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: L739Y7RX

ALG is currently hiring Licensed Aircraft Engineers (B2) for our client based in Singapore. This role is an exciting long-term contract position with us.

Our client is renowned in the aviation industry for aerospace manufacturing, maintenance, repair, and overhaul of aircraft engines.

Job Responsibilities:

• Perform and certify aircraft maintenance tasks including inspection, repair, modification, and functional tests

Job Requirements:

• A CAAS license or an Aircraft Maintenance License, that is transferable to a Singaporean CAAS license; These include (but not limited to) – EASA, CASA, DCAM, etc.;
• Possess at least 2 type ratings, with a minimum of one of the following type ratings: A320, A350, A380, B747, B777, and/or B787
• At least five years of experience as an LAE; and
• Excellent interpersonal and communication skills (English proficiency in reading/writing)
• Good customer relationship skills

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R22105273

Job Description:

• Ensure the quality of all construction work performed on site are in accordance with the company's QAQC requirement.
• Visit project sites, arrange and conduct QAQC inspections on mainly Structural Works and Architectural Works.
• Assist project teams on the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards.
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practises.
• Ensure that all project quality records and quality audit plans are maintained.
• Any other duties as assigned.

Job Requirement:

• Candidate must possess Bachelor Degree or Diploma in relevant discipline.
• Minimum 3 years of experience in construction/ civil engineering industry.
• Able to read and understand CAD, Revit/Navisworks software services in 3D model is essential.
• Have experiences in working in large scale projects.

Responsibilities

• Assist, plan and execute Mechanical / Electrical / Fire / Plumbing & Sanitary (MEPL) project in compliance with safety, quality, and schedule
• Perform overall quality control of the work (budget, schedule, plans, team performance, supervision, and inspection)
• Manage project budget and expenses and provide regular project budget statement and progress update.
• Prepare, schedule, coordinate and monitor the assigned projects
• Monitor project compliance to applicable codes, practices, QA/QC policies, performance standard and specifications
• Assist to propose value engineering methods with the clients to interpret their requirements and represent them in the field
• Ensure site organization, workforce management and arrangement
• Provide technical submission of proposal / drawings / MOS / RA etc
• Attend site meetings and necessary site walk
• Cooperate and communicate effectively with internal and external stake holder.
• Review engineering deliverable and initiate appropriate corrective actions
• Any other duties as assigned and comply to ISO / OSHA standards

Requirements

• 1-3 Year(s) of working experience in managing Additional and Alteration services in Commercial / Industrial / Plants sectors for Mechanical, electrical, Plumbing and Sanitary system, Fire system (MEPL)
• Candidate must possess at least Bachelor's Degree/ Diploma in Engineering or equivalent.
• Proficient in MS Excels/words/PowerPoint/Project
• Preferred skill sets: good leadership skill, self-Driven, resourceful, problem-solving nature, strong business acumen, project management and good conversational/writing skills in English

Responsibilities

· Understand customer demands, challenges, and objectives through assessments, information gathering and Customers, technology/industrial engagements

· Collaboration with sales & business development, product & engineering stakeholders including analyse and selection of appropriate hardware, software, and services to create the winning solution offering to customer and markets

· Developing detailed proposals, presentations, and technical documentation that outline the proposed solutions, including features, benefits, and pricing. Presenting these proposals to customers in a clear and compelling manner

· Preparation and conduct of product and solution exhibitions, demonstrations and proof-of-concept activities to showcase the capabilities and address any technical questions or concerns from customers

· Providing technical expertise and support to business development & sales team throughout the sales cycle, including participating in customer meetings, responding to technical queries, and contributing to the development of sales strategies

· Building and maintaining relationships with technology vendors and partners to stay informed about the latest products, technologies, and industry trends. This includes evaluating new solutions and incorporating them into proposed designs

· Keeping up-to-date with advancements in communication technologies, industry standards, and best practices. Pursuing opportunities to enhance technical skills and knowledge

Requirements

· Degree in Electrical/Electronics/Communications Engineering

• Minimum 5 years’ experience in Communications/Telecommunications/Infosystems Solutions Engineering and Implementations, supporting as a Pre-Sales capacity

· Strong understanding of communications technology

· Able to follow up closely with customers in order to answer to their needs

· Working location is in Jurong East

· Singaporeans Only

Please submit resumes to [email protected]

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

RESPONSIBILITIES

• Management of fast-paced and/or complex projects undertaken by ITS Science & Medical in Singapore or regional areas.
• Responsible for project management of infrastructure services supplied/offered by the Company that include, but not limited to hospital infrastructure, animal facilities, laboratory furniture, industrial, schools and other systems.
• Manage ACMV, HVAC system laboratory projects to completion in both Singapore and/or international standard, adhering to quality assurance policies and meeting performance standards
• Liaise with all stakeholders including facility management, architects, M&E consultants on engineering design and user specification, ensuring compliance
• Part-take in project tendering meetings and provide technical advice to tender team
• Prepare and manage project schedule and monitor project activities by project team to ensure compliance to activity execution timeline
• Provide technical support to Support sales team from time to time.
• Ensure Workplace Safety and Health is implemented at site.

REQUIREMENTS

• Diploma/Bachelor’s Degree in Mechanical Engineering or related Engineering disciplines.
• Experience in ACMV is preferred.
• Preferably with 3-5 years of relevant work experience handling construction projects (designing & management)
• Valid Class 3 driving license and personal vehicle will be an added advantage.
• Team player with a great can-do attitude.
• Outgoing personality.

BENEFITS

• Attractive remuneration package
• Career development opportunities

Just imagine your future with us…

At Aurecon, we see the future through a very different lens. Do you?

Innovation, eminence and digital are at the heart of everything we do. Are you excited about the future?

Are you driven by the opportunity to work on some of the most challenging and complex projects around the world and to learn from the best? We are.

Diversity is at the core of everything we do. We work together to create a culture based on respect, trust, and inclusiveness. Our differences are what fuel our creativity.

What will you do?

In this position, you will join our Transport, Land & Water business, where you will play an integral part in a team of highly skilled specialists that ‘bring ideas to life’ for our clients across all types of building and infrastructure projects.

We know the work we do is vital in assisting our world’s economic development and, it is the technical expertise and the depth of knowledge of our people that really sets us apart. Here are the key things you will do to ‘bring ideas to life’.

• Provide comprehensive design and project management services to clients, including preliminary & detailed design of Water projects including roadworks, earthworks, sewerage, water, and drainage.
• Carry out design calculations and produce sketch drawings, preparation of tender documents and proposals. Write, consolidate, and review technical reports of water projects and studies.
• Lead and delegate tasks within a workgroup, act as a technical expert to mentor other engineers within the team, while supervising and coordinating to ensure quality and accuracy of designs.
• Ensure compliance with Project Design Criteria/Client Brief/ Approved Concept, as well as relevant design standards and office standards.
• Assist in business development activities and establish good working relationship with local authorities at the project and local market level.

We know today’s complex challenges can only be solved through bringing together diverse teams of people from across our business, so there will be opportunities for you to apply your skills and creativity to projects in other geographies and markets.

What can you bring to the team?

Firstly, you will share our genuine passion for re-imagining engineering and be someone that actively pursues continuous learning to help shape the future. You will also need the following:

• Recognized Civil Engineering qualification or related field (Bachelor/ Master’s degree).
• Minimum 10 to 15 years of professional design experience in the field of civil works design preferably in roads, drainage, and sewerage projects of PUB, JTC, HDB, URA, LTA, etc.
• Sound understanding and knowledge of civil related regulation, standards, and reference of design – such as Euro Design Codes, Singapore Standards and Codes of Practice, and statutory requirements (LTA, BCA, PUB etc.), with hands on experience in usage of Civil Engineering Software.
• Excellent technical writing and presentation skills
• Energetic, proactive, and reliable team player with excellent communication and project coordination skills.

Our Aurecon Attributes define our way of being – they are a collection of qualities that makes us who we are. Individually and collectively, they unleash the true power of Aurecon, they make us stand out from the crowd and are critical to our success. We don’t expect you to have all eight of the attributes, but one that is unique to you.

Finally, we value that each of our team members brings something different to Aurecon. We look for people who have had a broad range of experiences throughout their career and can demonstrate how they have worked as part of a team to bring ideas to life. Does that sound like you?

About Us

Headquartered in Australia, Aurecon is one of the leading international engineering, design and advisory company that brings vital engineering experience, technical capabilities, and design expertise to an extensive range of markets.

Over the last 85 years, our team of more than 5 000 experts located in 11 locations across the globe have collaborated with our clients and partners to reimagine, shape and engineer clever, innovative and sustainable solutions to solve some of the world’s most complex challenges.

In Asia, where the region is undergoing rapid transformation in areas of sustainability, digital and infrastructure, we lead by being innovative, flexible, and nimble. We embrace design-led thinking – an approach that is guided by digital engineering, the user experience and sustainability – ensuring that the work we do is future ready and leaves a legacy for the next generation.

Think engineering. Think again.

Want to know more?

You can learn more about what it’s like to work at Aurecon by visiting the careers section of our website.

If you are intrigued or excited by what you have read, then we want to hear from you. Apply now!

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Overview:

Electrical / PLC Engineer to design, implement, and maintain electrical and automation control systems. The ideal candidate will have strong electrical and programming skills and extensive experience with industrial automation systems.

Key Responsibilities:

Design, develop, and implement PLC programs for automated manufacturing systems using platforms such as Allen-Bradley, Siemens, or Beckhoff. Other platforms may also be utilized in the course of your work.

Create and maintain HMI (Human Machine Interface) applications, SCADA systems and MES as required.

Troubleshoot complex control system issues and provide timely solutions to minimize production downtime.

Develop and maintain documentation for PLC programs, including logic flowcharts and technical specifications.

Perform risk assessments and ensure compliance with safety regulations.

Perform calculations, sizing and deployment of LV electrical and control systems.

Inspection, testing and troubleshooting of existing and new systems.

Qualifications:

Bachelor's degree (or Diploma) in Electrical Engineering, Computer Engineering, or related field. Fresh graduates are welcome to apply, experience in Semi-conductor field is an added bonus.

Experience programming PLCs in an industrial environment preferred.

Proficient in ladder logic programming and structured text.

Experience with major PLC platforms. (Allen-Bradley, Siemens, TwinCAT, etc.)

Knowledge of industrial networks and communication protocols.(Ethernet/IP, Profibus, Modbus)

Experience with HMI/SCADA development.

Experience with MES integration and deployment.

Experience with electrical systems and industrial safety standards.

Strong problem-solving and analytical skills.

Strong communication skills.

Working Conditions:

Mix of office and factory floor environment

Will require travel to overseas sites including but not limited to, Singapore, Malaysia, China, India. Existing Visas not required, but is an added bonus.