Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

• Assists the Project Manager in managing and supervising the execution of production works and ensuring the delivery of assigned projects
• Assists the Project Manager in planning and prioritising the order of works and work methodology
• Liaises with the project team to allocate adequate manpower and equipment resources
• Monitors work progress on board vessels and in workshops
• Conducts production meetings between Yard’s subcontractors, supervisor and ship’s staff to clarify work scope, co-ordinate sequence of work, update schedules and other contractual matters, as and when required
• Ensures works are carried out according to the job specifications in terms of quantity, quality and meeting Class/Owner requirements by developing test plans and arranging for inspection and survey for the Superintendents and Classification
• Completes the process of mechanical completion and commissioning scope of work
• Any other associated tasks and responsibilities assigned from time to time

Requirements:

• Bachelor's Degree in Marine Engineering, Shipbuilding, Naval Architecture, Mechanical Engineering or relevant apprenticeship training in a marine trade
• Knowledge of various workshops dealing with specialised works in the industry
• Able to perform scheduled night duties when required
• Attend to vessel’s needs during weekends and public holidays
• Travel within the country or abroad for ship check
• Good knowledge of marine industry skills in any discipline
• Knowledge in Hull,Mechanical, Piping & Electrical will be advantageous
• Good planning,organization, control, problem-solving, interpersonal and communication skills
• Good knowledge of project management software and other planning softwares

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.
We are a growing engineering consulting company based in Singapore, seeking for a fresh graduate to join us as an Engineer – Mechanical (Building Services).

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Perform initial engineering task on the Mechanical services detailed design (including calculations, computer simulations, etc.) for building projects under the supervision of senior engineers.
• Prepare submission to authorities for approval of design
• Attend to project meeting with Client, PM and Consultants from other disciplines
• Attend site project meeting and site inspection, and respond to technical queries
• Liaise with authorities on plans submission and compliance

PRE-REQUISITES

• Degree in Mechanical Engineering discipline
• Able to work independently and exercise initiatives
• Excellent in both written and verbal communication skills
• A team player; Able to interact and work with colleagues and member of other consultants at various level
• Schedule driven and self-motivated

Job Highlights

• Career Development & Opportunities
• Medical Allowance
• AWS, Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s)for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Our company is at the forefront of innovation in financial technology. Our mission is to develop AI-driven strategies that predict market trends.

We're looking for talented individuals to join our newly founded trading team in our Singapore office as Machine Learning Developers with a specialization in predictive finance.

Responsibilities:

• Develop and implement machine learning predictive models.
• Collaborate closely with team members to create data-driven trading strategies and algorithms.
• Conduct research on academic literature.
• Explore various data sources to craft insightful features for machine learning models.
• Continuously improve and monitor the performance of the ML models.
• Stay up-to-date with the latest trends in machine learning.

Qualifications:

• Bachelor’s, Master’s, or Ph.D. in Computer Science, Mathematics, or a related field.
• Experience: 5+ years of experience in machine learning.
• Technical Skills: Proficient in Python, R, TensorFlow, PyTorch, or similar machine learning frameworks.
• Financial Acumen: Interest in financial markets, trading, and economics. A deep understanding of these subjects is strongly preferred but not required.
• Problem-Solving: Outstanding problem-solving skills with the ability to apply machine learning techniques to complex market data.
• Communication: Strong verbal and written communication skills to work effectively within our collaborative team.

Preferred Qualifications:

• Experience with time-series analysis and forecasting.
• Knowledge of the financial industry and experience working with big data.
• Independent research experience.

Job Purpose :

Engineer produces specifications for, design, develop technical drawings. He/she is expected to service and give technical advice to customers and fellow colleagues. He/she will be the main contact person for shutdown projects.

Duties and Responsibilities :

* Attend site / plant shutdown meeting

* Relay information to sales to work on preliminary quotation

* Liaise with Customers and Sales to carry out production of work orders as specified

* Liaise with Sales with regards to availability of raw materials for production or request purchase of required material when necessary.

* Monitoring progress reports on gasket usage by Customers during plan shutdown (container service) and generate weekly consumption report for customer.

* Compile and consolidate all expenses incurred by the Company (ie. manpower, overtime, meals and transportation) during shutdown project period.

* Attend to quality and technical problems at client's site and recommend the use of appropriate substitutes.

* Attend to quality and technical questions from fellow colleagues.

* Planning of work schedule for shutdown projects.

* Allocation of manpower for shutdown projects.

* Conduct product presentation to customer.

* Verify materials for use in manufacturing as specified in the work orders.

* Ensure smooth running of projects from beginning to the end.

* Ensure to meet customer's project deadline within time frame given.

* Ensure stocks are sufficient to support customers during the shutdown project.

* Maintain and housekeep all records of equipment drawings.

* Handle customer's complaint, if any

* Determine and plan training requirement needs of subordinating staff.

* Plan for the staffing requirements and recruitment of new employees if needed.

* Design technical training materials for other departments.

* Any other duties assigned by Business Unit Manager.

Project Design & Engineering Calculations and Proposal drawings to Client.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as Equipment sample or Site measurement studies

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Schedule the project in logical steps and budget time required to meet deadlines.

Site & office project management and daily operations including Engineering Design, Drawing and Fabrication, inspections, site measurements and handover to client’s.

Attend Site meeting, Equipment rectification in assembly and dismantling when required.

Overall project planning, scheduling, monitoring, and updating to meet project completion targets.

Liaison and meeting with client's representatives, relevant authorities, and consultants.

Site co-ordination, monitoring and report work progress.

Flair in design; able to sketch fast and produce good design concept

Coordinate all new and current on-going projects and able to communicate well with all levels

Review M&E Design Drawings and ensure compliance with design specifications and guidelines. Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Review incoming engineering, ISO piping drawings and assess impact of extra work or changes on schedule.

Ensure all regulatory and statutory requirements regarding testing and record keeping are met.

Supervise and coordinate M&E and Mechanical piping/equipment installation in accordance with approved drawings and materials. Coordinate M&E details with Clients, Consultants, Sub-contractors and other site staffs.

Monitor performance of multi-skilled craft workers in the installation, removal, or adjustment of equipment or components in accordance with established project procedures, requirements and specifications.

Monitor construction schedules, methods, manning charts, materials and equipment requirements.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Supervise electrical and instrumentation construction work as per IFC drawings.

Monitor construction schedules, methods, manning charts, material and equipment requirements.

Monitor the activities of contractors and subcontractors performing craftwork, ensuring compliance with project quality, safety, and security requirements.

Min 5-7 years’ of experience in Engineering related activities in Mfg, Recycle, Oil & Gas and Chemical plant industry.

Responsible for safety of supervised personnel; ensures that craft personnel comply with established safety policies and procedures, and that they practice safe work habits.

Applicable only for Singaporeans / PR's

Job Responsibilities:

• Design, implement and administer security infrastructure and measures to protect against potential threats
• Test and evaluate security products and solutions
• Monitor and investigate systems and infrastructure activities for signs of unauthorized access or malicious activities
• Lead or participate in internal and external security audits and risk assessments to identify vulnerabilities in existing systems, develop and implement remediation plan for closure
• Review the technical design and facilitate onboarding process for new systems to ensure security compliance
• Develop security policies and procedures and manage compliance
• Create incident response plans; lead and manage incident response
• Promote security awareness and conduct routine social engineering tests for end users

Job Requirements:

• Bachelor’s degree or diploma in Computer Science, Information Technology, Cybersecurity, or a related field.
• 4-7 years of experience in IT or cybersecurity roles.
• Fundamental knowledge on IP networking (e.g. TCP/IP, routing, etc.) and Firewalls (e.g. FortiGate).
• Strong analytical and problem-solving skills.
• EPP/EDR product certification such as Trellix ePO, Symantec Endpoint Protection is an advantage.
• Experience in implementing security products such as SIEM, NIPS, EDR System is an advantage.
• Security Certifications such as GISA, GSEC, CISSP, CISM is an advantage.
• Proficiency in network security and encryption technologies.
• Knowledge of security frameworks and industry best practices (ISO 27001, NIST Cybersecurity Framework, and PCI DSS).
• Experience with vulnerability assessment and penetration testing.
• Strong understanding of secure coding practices.
• Expertise in configuring and managing firewalls, intrusion detection systems, and other security devices.
• Effective communication and collaboration skills to work with cross-functional teams.

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Job Requirements

1) To Work as lead Engineer for Oil & Gas Project

2) Leading a Team of Electrical Engineers in Preparation & Review of Load lists, Single Line diagram of PCC, PMCC, MCC, DB's, Equipment Sizing Calculation, System Study through ETAP (Version 19.1) and Preparation & Review of Layouts like Hazardous Area classification, Lighting Layout, Cable and Power Layout, Substation Equipment layout, Earthing & Lightning protection Layout.

3) Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies

4) Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/ approvals/resolution of open issues

5) Review and Ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team

6) Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.

7) Preparation of Material Requisition, Specifications, Technical Bid Evaluation for Electrical works.

8) Preparation and Compliance for Engineering Audit Requirements.

9) Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.

10) Technical assistance to construction activities and attending to Site Queries.

11)Reviewing Vendor Drawings for Transformers, Switchgears, Cables, Distribution Boards, Junction Box, LCS, Motors etc.

12) FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

13) Coordination with PMC / QP and Construction Coordination.

14) Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works

15) Inspecting various equipment like LV & MV Bus duct, LV & MV Switchgear, Cables, Transformer, AC / DC UPS

16) Field Engineering Support Activities to complete the task in accordance with the project schedule.

17) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

18) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelors’ Degree in Electrical Engineering

Experience

Preferably Minimum 15 years of experience

Software Requirements

ETAP, DIALUX, Auto cad, MS Excel, MS Word

Authorities and Responsibilities

• Act as primary customer contact, and provide technical support and regular update to customers on project development in a timely manner.
• Communicate and co-ordinate with clients and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the project specifications, client's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their project execution.
• Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
• Plan, monitor and control projects from the receipt of orders through to installation / completion at the customer's site. Additionally to review and competently controlled the completion of project within the allocated budgets and schedules.
• Responsible for getting project acceptance by customers.
• Lead the cross-functional project team and work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Participate in the implementation of risk assessment and risk control of medical devices.

Competence Requirements

• Preferred to have NTC / Diploma / Degree in Mechanical / Manufacturing / Precision Engineering or equivalent.
• Preferably with 3 – 6 years of related experience in which 2 years of involvement with project management in a contract manufacturing environment.
• Preference will be given to those who have experience working with multi-discipline project teams in a manufacturing equipment or system integration environment.
• Working knowledge with precision machining / assembly processes is an advantage.
• Able to work effectively with customers according to deadlines and under pressure-filled conditions.
• Should be innovative, independent and motivated.

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

JOB DESCRIPTION

Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

What a System Interaction Engineer does at HP:

• Partner with the R&D, NPI and Manufacturing teams for both Supplies and Printer organizations to deliver on program deliverables.
• Define and design System Interaction testing to evaluate product performance and programs intent of meeting or exceeding customer experience.
• Collaborate with Supplies Quality team to analyze defects, understand root cause and define solutions to improve product quality.
• Automate and digitize current Test Flow for better efficiency and effectiveness.

Individuals who do well in this role at HP, usually possess:

• Bachelor's or master’s degree in Mechanical Engineering, Manufacturing Engineering, Electronic and Electrical Engineering, or equivalent.
• Typically, 0-1 years’ experience.
• Software development, python coding and RPA experience.
• Strong technical engineering leadership and capabilities.
• Effective leadership on planning, execution, and issue resolution.
• Demonstrated analytical and empirical problem-solving skills.
• Demonstrates growth mindset hallmark.
• System thinker, looking for connections, and comfortable with things being dynamic.
• Good flexibility and adaptability are key.
• Possesses strong teamwork and ability to collaborate with cross function teams.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned

· Management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Degree in Electrical Engineering from a recognized University and eligible for registration with the Professional Engineers Board

· Professional Engineer Certification will be an advantage

· At least 6 years of working experience in engineering design consulting practice on mechanical projects.

· Good project technical knowledge and design softwares

· Good project management and technical skills

· Familiar with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Team player and able to work independent with minimum supervision

· Able to work under pressure with good time management skill

· Good analytical skills would be preferred

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

Responsibilities：

1. Responsible for pre-sales support of products and problem solving solutions, assisting sales to research and analyze customer demand, formulating technical proposal and tender, expounding on technical solutions, demonstrating products and answering technical inquiries.

2. Assist sales to promote and sell products and problem solving solutions.

3. Collect and feed back customer’s opinions on products and technology to the technical department. Deepen solutions according to customer’s demand, and assist technical engineers to implement solutions.

4. Conduct relevant technical training for internal sales and pre-sales as well as external partners.

Requirements：

1. Bachelor degree or above; Computer, automatization or logistics majors are preferred.

2. Have three years and above experience in logistics automation, e-commerce or ERP-WMS; Experience in solution design, technical consultation, and project bidding is preferred.

3. Capable of analyzing, guiding demand and designing solutions in logistics, manufacturing storage, e-commerce and related IT systems.

4. Problem solving oriented , honest, pragmatic and responsible, highly enthusiastic and a team player.

5. Good communication and presentation skills, English can be used as working language; Proficiency in two or more foreign languages is preferred.

6. Willing to travel a lot.

...

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities

· Responsible for providing preventive maintenance service for BMS (Building Management System)

· Carry out troubling shooting, analyzing and rectification of the system on time

· Support client with system operation and recommendation for improvement

· Data analyzing and determination of the system operation status

· Response client’s request and attend the issue in short notice

· Supervise subcontractor to carry out the work safely

· Provide the assistance to colleague and mentoring actively

· Ensure all works carried out in accordance with the specified quality and EHS standards

· Prepare and submit quotations, including material, labor, and scope of works

· Perform replacement/repair, fit out works/A&A for existing BMS site

· Perform weekly standby on rotation schedule

· Perform calibration and verification of BMS sensors annually

· Provide sales support BMS service and site survey

Requirements

· Diploma/ Degree from a recognized technical institute

· Hands on experience in BMS Control System

· Hands on experience in programming languages and logic gates

· Familiar with digital fundamental

· Knowledge on basic networking

· Strong customer management & problem solving skills

· Excellent communication & presentation skills

· Skilled in the use of MS office

· Knowledge on ACMV system

Job Responsibilities

• Responsible for developing all electrical, controls, instrumentation documents and specification for the project.
• To carry out electrical, controls and instrumentation related detailed design and preparation of drawings and datasheets
• To interpret and interface with other engineering discipline documents like P&ID, GA, client control and instrumentation systems
• To check and review all electrical, controls, instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors and OEM to resolve technical issue at site and in office.
• To interface with engineers of other disciplines within the engineering department.
• To prepare procurement support including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost estimates etc.
• To provide technical support to project team for on-going projects and resolve any technical issue on site.

Job Requirements

• Degree or Diploma in Controls, Electronics and Electrical Engineering.
• 3 years relevant experience required for Senior position
• Knowledge of SCADA, PLC and other instrumentation systems will be an advantageous
• Experience in design and drafting of LV and HV systems.
• Familiar with Electrical Installation works and international electrical codes and standards.
• Knowledge in MS, Autocad, Programming languages will be advantageous
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• Able to work independently in a flexible, dynamic and fast-paced environment.

Job Summary

· Senior/Principal Civil and Structural (C&S) Engineer is an exciting role that offers candidates opportunities in SJ Global Energy’s business unit covering C&S design work for various projects such as CCGT power plants, renewable, clean energy projects and typical land infrastructure for terminaling projects.

Responsibilities:

· Perform feasibility study, concept design, front end engineering design (FEED) and detailed designs for civil & structural (C&S) works in industrial/energy related projects. The C&S design will cover foundation, substructure for storage tanks, pipe racks/sleepers/bridge, equipment plinths/foundation, underground pipeline culvert, drainage, sewerage, road infrastructures, superstructures for low-rise buildings/structures, etc.

· Experience in power plant projects would be an added advantage

· Prepare C&S material take-off (MTO) for cost estimates

· Prepare C&S tender specifications, and project requirements, carry out the tender evaluation, etc. for C&S works

· Conduct presentation for concept, FEED and detailed designs to clients and stakeholders

· Project management

· Carry out authorities’ pre-consultation, submissions and liaison with authorities for necessary approvals

Requirements:

· Preferably, honour degree in C&S Engineering from a recognised university and with at least 5 years of detailed design experience in civil & structural engineering projects.

· Conversant in geotechnical engineering design

· Experience in marine facilities’ design would be an added advantage.

· At least 5 years of relevant working experience in the design of concrete and steel structures, drainage, sewerage and road works infrastructures

· Candidate with more than 15 years of relevant experience will be considered for a higher position

· Conversant in Eurocodes, BS Codes, NFPA, API

· Conversant with local authorities’ requirements and submission

· Able to perform a feasibility study, conceptual, FEED and detailed design using commercial software, excel spreadsheet, etc.

· Able to project manage assigned projects independently and possess strong presentation, communication and report writing skills

· Good spoken and written English

· Fluency in spoken and written Chinese would be an advantage

· Able to travel for overseas projects at short notice

Cyber Security Engineer (Shift)

Job Description:

• Perform remote standby during weekends, public holidays, and after office hours for Monday – Friday.
• Provide phone/email and on-site (if required) support, resolving, mitigation, troubleshooting and investigating issues pertaining to cybersecurity solutions the company has implemented for its clients.
• Log incidents (either via phone or email) into incident management system (ITSM).
• Track and handle all incidents within client’s SLA.
• Coordinate with stakeholders for service recovery and follow through all the necessary escalation to respective team(s).
• Follow up with client on pending tickets for closure.
• Provide daily handover report after each shift.
• Onsite training during office hours as part of onboarding process and occasional trainings to keep up to date with the product

Job Requirements:

• Professional certifications in Information Technology or related fields.
• Self-motivated, always keen to learn new technologies and able to work independently.
• Possess logical thinking process in solving technical problems.
• A well-natured team player with strong customer centric mindset.
• Good communication skills with clients and various stakeholders.
• Experience or knowledge in Microsoft Windows and Server, Microsoft SQL, Networking and Virtualisation is an added advantage.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills