Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

Responsibilities:

• Perform servicing of Trane chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on Trane chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning
• Positive attitude

Job Descriptions:

• Collaborates with the commercial/business development team to develop innovative and competitive technical solutions for bidding projects.
• Prepares detailed technical method statements, drawings, and integrated service and equipment solutions to meet project requirements.
• Reviews and understands bidding employer’s requirement documents, project specifications, and process data.
• Translates employer requirements into effective contractor solutions that align with project goals.
• Monitors market trends to ensure tender documents remain competitive and relevant, making necessary adjustments.
• Implements improvements in the tender process to enhance the company’s market position and competitiveness.
• Works closely with various department stakeholders to gather necessary information for bidding proposals.
• Consolidates and integrates collected information into comprehensive bid proposals.
• Conducts internal reporting of tender solutions to secure management approval for bid submissions.
• Provides timely and accurate updates on bid progress to the tender manager.
• Supports the tender manager in developing commercial bid solutions and engaging with the market as required.
• Support engineering budget (estimation) and cost control.
• Participates in market visits to assess and incorporate subcontractor solutions into the company’s proposals.
• Evaluates subcontractor technical solutions to ensure alignment with project requirements and company standards.
• Integrates subcontractor solutions into the company’s bid proposals effectively.

Requirements:

• Minimum Diploma or Bachelor’s degree in engineering, or a related field.
• Prior experience and knowledge in offshore wind projects is highly desirable and will be given preference.
• Proven experience in technical solution development, preferably within a commercial/business development context.
• Strong understanding of bidding processes, tender documentation, and market trends.
• Excellent analytical skills and attention to detail.
• Effective communication and collaboration skills to work with cross-functional teams.
• Ability to manage multiple projects and meet tight deadlines

Job Description

• Monitor, track, and provide timely project progress reports to the management
• Report to Project Manager / Site Manager for the arrangement of work
• Prepare the specification and data sheet as per codes / standards, project, and client’s requirement,
• Responsible of the submission and approval of materials in compliance to the specification;
• Responsible monitoring of work progress on site
• Co-ordinate the inspection work on site and installation works
• Handling technical and engineering problems on site
• Ensure site safety and proper execution of site work procedure on site
• Monitor and co-ordinate the works of subcontractors

Requirements

• Degree or Diploma in Mechanical Engineering / Building / Project Management or equivalent.
• Min. 2 years relevant working experience in the construction industry (building facade).
• Strong leadership, organizational, planning, and interpersonal skills.
• Good working attitude with a high level of professionalism, integrity, initiative, and being a team player.
• Knowledge and/or experience in contractual management is an added advantage.

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Job Description

1. Help implement "Green" initiatives to align with Company's sustainability and eco-friendly strategies.
2. Ensure compliance with mandatoy regulations regarding water polution, recycling and waste disposal.
3. Collect and analyse environmental data.
4. Be familiar with business requirements that requires, compliance with Enviromental Product Declaration,
ISO 14025 and Environmental, Social and Governance factors.
5. Help determine ways to prevent, control and correct environmental health hazards.
6. Maintain records and help manage Company's consumption of electrical and water resources.
7. Familiarity with company's effort in keeping pace in complying with Façade productss specifications
concerning Design for disassembly, use of recycled materials, circular economy, materials with low carbon
emission with sustainable characteristics.
8. Create reports about company's environmental impact.

Position Requirements

Bachelors Degree In Environmental Engineering

Tasks

Designing systems and processes to minimize pollution and waste

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

About the role

This position involves applying knowledge in engineering and science to design & develop scale up processes in the laboratory and future production of our aerogel line of products. Successful candidate will be given a fulfilling role to work in the company’s state of the art platform technology, ASPIRe. As a valuable member of the team, you will be involved in every aspect of the development from infancy to the implementation

Process Engineer

Locations: 8 Cleantech Loop, #08-37 Singapore 637145 .CleanTech 3

Working Days: 5 days a week

Time: 9 - 6 pm

Basic Salary ranges from $4500 to $5500 (Depending on qualifications and experience).

Other benefits include transport allowance and basic medical coverage, annual leave, paternity/maternity and compassionate leave.

Roles & Responsibilities

• Assist Production Manager in the daily running of production department.
• Design and develop the pilot process plant for upscale production.
• Develop product testing protocols and procedures based on product specifications to test and determine the full operating profiles.
• Lead in troubleshooting of process equipment and machinery when required
• Assess processing suitability according to varying criteria including performance, ease of manufacturing, reproducibility, and scalability
• Consolidate operating parameters and other observations in a clear and structured format/template
• Develop framework and manage safety records such as SOP, SWP, GMP and RAM.
• Work closely with the formulations and product development team to achieve optimization in processes in terms of efficiency and cost.
• Carry out quality control for in-house development and customer samples
• Work closely with business team and customers/industry partner for pilot trials, implement their feedback and improve existing product to achieve customer specification.
• Development of a suitable manufacturing process for the product formulation.
• Production of sample batch in lab scale and pilot scale.
• Responsible for effective technology transfer and upscaling to commercial scale batches
• Work closely with other departments to validate manufacturing methods for production scale batches.
• Train production personnel on manufacturing processes.
• Trouble-shooting in the process matrix for routine production.
• Maintain and document quality records with regards to processing units and machinery.
• To establish and maintain Good Manufacturing Practices for all commercial projects.
• Mentor and manage junior staff.
• Prepare progress update and presentations
• To ensure all GMP quality related records are kept properly

Requirements

• Have a Bachelors / Masters in chemical engineering, mechanical engineering, industrial engineering or a related field
• Have knowledge on process design software such as CHEMCAD, CHEMPRO, AspenPlus and/or other related software.
• Have a good knowledge of industrial processes and best practices in chemical plants.
• Have a good knowledge in HVAC systems
• Self-directed learner, ambitious with desire to succeed and positive attitude towards learning
• Experience in coatings/paint would be advantageous.
• Good knowledge of chemical handling.
• Project Management expertise

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘process engineer’ in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, residential status in Singapore, details of your educational background and work experience.

The Climate Transformation Programme (CTP) aims to develop, inspire and accelerate knowledge-based solutions and educate future leaders to establish the stable climate and environment necessary for resilient, just, and sustainable Southeast Asian societies. CTP will generate knowledge and innovation across disciplines including climate and Earth science, ecology, materials science, artificial intelligence, humanities, social sciences, the arts, finance, health, and engineering. It will also translate state-of-the-art scientific results into real world solutions for Singapore and transfer these solutions to Southeast Asia (SEA) and beyond. As part of this programme, Cross Cutting Theme 2: Satellite Remote Sensing will map and monitor the impact and solutions of climate change in Southeast Asia region.

The Earth Observatory of Singapore – Remote Sensing Lab (EOS-RS) at Nanyang Technological University in Singapore invites applications for a Research Fellow / Scientist / Engineer to support CTP Cross Cutting Theme 2 (Satellite Remote Sensing). The EOS-RS teams’ research covers SAR, multi/hyper-spectral remote sensing, LiDAR, and GNSS data for disaster response and hazard monitoring for earthquakes, volcanoes, and impacts of climate change.

EOS is a University Research Institute at Nanyang Technological University that conducts fundamental research on earthquakes, volcanic eruptions, tsunamis, and climate change in and around Southeast Asia, towards safer and more sustainable societies. For more information on EOS please visit http://www.earthobservatory.sg.

EOS-RS and CTP welcomes applications from qualified candidates who have interests and expertise relevant to the use of remote sensing for mapping, monitoring, and understanding the causes and effects of climate change. We are particularly interested in candidates who have expertise in analysing and interpreting satellite remote sensing data from Synthetic Aperture Radar (SAR) and multi/hyper-spectral sensors for measuring ground deformation, mapping surface changes due to disaster events, and mapping ocean colours and ocean topography for carbon flux estimates. We are also interested in candidates who have experience applying machine learning to InSAR and other remote sensing observations.

Successful candidates will have a Master’s/PhD in a relevant field (e.g., earth science, electrical engineering, image processing, and deep learning), expertise in processing and modelling geodetic data using open-source analysis tools, an ability to apply AI/ML techniques to remote sensing data; and demonstrated track record of impactful research or projects in topics related to the position. They will also have strong English and communication skills, the ability to write code using Python or MATLAB, the desire and ability to work as part of a multicultural team, and a demonstrated ability for creating intellectual value.

Additionally, the successful candidate will be part of the large and interdisciplinary research teams at EOS, the Asian School of the Environment (ASE), and the School of Electrical and Electronic Engineering (EEE), helping to develop algorithms and systems for disaster mapping and climate change in collaboration with space industries and responding agencies around the world. They will collaborate with the geodesy group and many other groups at EOS/ASE.

Key Responsibilities:

• Architect and develop InSAR-based remote-sensing solutions and capabilities grounded in current research to address needs of scientists and external stakeholders
• Coordinate and manage application development and experimentation efforts across projects and synergies
• Conduct feature experimentation and develop applications both independently and in a team
• Help to mentor Research Assistants/Associates

Job Requirements:

• Master’s/PhD in Earth science, geophysics, geodesy, physics, electrical engineering, natural hazards, computer science, machine learning, or a related field.
• Demonstrated expertise in processing SAR data (with open-source tools such as ISCE or GMTSAR) for surface deformation measurement and change mapping.
• Strong technical skills in data processing for remote sensing applications; experience in optimizing and implementing automated processing pipelines (in cloud, HPC environments) for multi-modal, large remote-sensing datasets for machine and deep learning desired.
• Evidence of the ability to write and present at the level required for peer-reviewed scientific journals and international conferences, which will usually be in English.
• Evidence of independence in research direction and team spirit.

Interested applicants should submit a CV, list of publications, research statement, diversity and inclusivity statement, and the names and contact information for three referees. For additional information please email Assoc. Prof. Sang-Ho Yun at [email protected]. Applications will be reviewed on an ongoing basis.

EOS seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status, family responsibilities, or disability.

We regret to inform that only shortlisted candidates will be notified.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilties

• Perform servicing of chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning / BMS / ACMV / HVAC
• Positive attitude

How to Apply:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to diana.pang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Pang Seng Leng Diana

EA Personnel Reg No: R1106651

Job Description

· Responsible for ensuring that assigned projects meet customer’s specs, strictly follow procedures and schedules

· Communicate and coordinate effectively with all relevant internal & external team members including contractors to ensure efficient completion of projects

· Review work procedures and highlight activities which may cause interruptions on the projects

· Closely supervise all contractors to execute tools services hook-up activities, ensure safety regulations practiced and monitor work quality performance

· Maintaining and modifying equipment to ensure that it is safe, reliable and efficient

· Liaise with clients on services requirement, schedule, reports and progress claims

· All other ad-hoc assignments assigned by Project Manager

Qualification

· Degree /Diploma in Mechanical Engineering

· At least 2 years of working experience

· Proficiency in Microsoft Project and Microsoft office and AutoCAD

· Highly analytical, meticulous, proactive and self-driven

· Strong team-player with excellent interpersonal and communication skills

· Able to work under pressure and in fast-paced environment

· Able to work collaboratively with others

· Able to start immediately

· Able to read and interpret P&ID.

Benefits:

• Basic Salary up to $6,000 with yearly increment based on performance.
• 5.5 Days (Monday to Friday, 8am to 5pm)/(Saturday, 8am to 12pm)
• Our company emphasises on good career progression

Job Description:

This is a full time role for a Senior Service Engineer (Ship Cranes) located in Jurong East. Our company is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry and you will be responsible for field service tasks, including troubleshooting and repairing deck cranes, grabs, windlasses, hatch cover hydraulics, and davits.

Qualifications:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage

. QAQC Inspector (Fabrication /Welding)

Responsibilities:

• Preparing or establishing that a welding procedure is available, has been approved as

required by the appropriate authority and is being employed in production.

• Witnessing of welder and procedure approval tests that including of the preparation of test

pieces and destructive tests and verifying compliance with appropriate standards and

specifications.

• Verification that adequate and valid welder approvals are available, and that only approved

welders as required are used in production.

• Interpretation of weld drawings and weld symbols.

• Performing of visual inspection and ensure that all finished goods are checked and approved

prior to any delivery of handover.

• Verification that post weld heat treatment has been conducted in accordance with

specification requirements.

• Appreciation of the factors influencing the formation of weld defects and their acceptability

in relation to the written specification.

• Coordination with QC Inspector (Hull/Structure and Piping) and NDT Coordinator, to verify

and ensure that all finished welds are checked and approved prior to any delivery of

handover.

• Ensure that quality assurance standards and procedures are maintained.

• Ensure that reports that are required are completed accordingly to the project

specifications.

• Liaise with Contractor, Production and Client’s representative to ensure the product is

checked and complied with the project quality plan and specifications.

• Perform any other tasks as may be assigned by the supervisor.

• Ensure compliance to relevant government regulations and company’s quality, safety, health

and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum Diploma in Engineering or relevant field of International certification (e.g. AWSCWI or CSWIP 3.1 WI).

• Physically fit since some of tasks require lifting of some equipment.

• A team player with the ability to work independently as well as in a team

• Good communication skills, meticulous, resourceful, able to multi-task

• Computer literary (MS. Office).

Benefits:

• Basic Salary up to $6,000 with yearly increment based on performance.
• 5.5 Days (Monday to Friday, 8am to 5pm)/(Saturday, 8am to 12pm)
• Our company emphasises on good career progression

Job Description:

This is a full time role for a Senior Service Engineer (Ship Cranes) located in Jurong East. Our company is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry and you will be responsible for field service tasks, including troubleshooting and repairing deck cranes, grabs, windlasses, hatch cover hydraulics, and davits.

Qualifications:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• 5 days, Jurong, Transport provided
• $4200 - $5000 basic salary, AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Minimum 1 year of experience in Process Engineering relating to Supply Chain
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, MNC, Boon Lay, transport provided (2 ways)
• Salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Minimum 1 year to 2 years of relevant experience
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• 5 days, MNC, Boon Lay, transport provided (2 ways)
• Salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Minimum 1 year to 2 years of relevant experience
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Responsibilities:

• Tracks and report daily work progress to the Yard Manager
• Ensures that the repair, conversion and construction jobs defined in the Specifications to be performed are carried out in accordance to the budget and schedule set by the Project Manager.
• Appoints approved subcontractors in consultation with Subcontracts Dept and Yard Manager and authorize purchase of equipment, spares and materials
• Ensures that records of work done are copied to the billing and project manager for their follow-up actions
• Responds to customer complaints and take corrective and preventive actions on errors of staff, subcontractors and suppliers
• Implements and maintain the Safety Management and Quality Management Systems.
• Communicate progress, highlights, and prioritizes between Hull Shop and Hull Afloat.
• Carries out special project documentation and case studies including work methods improvements.
• Ensures the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations.
• Ensures that Health, Safety & Environmental operating procedures are followed and counsel employees about compliance as necessary.

Requirements:

• Diploma or Degree in Marine Engineering/ or related engineering disciplines
• At least 4 years of relevant working experience in FPSO EPC projects
• Ability to read and interpret technical blueprint, plan tools/ equipment/ material take off, prepare project schedule, and input manpower loading
• Willing to go on overseas assignment (2 - 3 months)
• Understands the yard’s various functional systems, ship repair knowledge and related commercial matters.
• Good Degree of planning, organisation, control, problem-solving, decision-making, interpersonal, communication and people management skills required.
• Good knowledge in standards and class requirements on various works in ship repair industry.
• Good knowledge on safety requirements and standards for various works carried out in the yard.
• Possess skill to assess the cost and time required for the additional works.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

OMS has built a long-standing commitment to the upstream energy industry as we manufacture and distribute products from facilities and business units around the world. We are an equal opportunity employer and process all employment applications following the relevant regulations in the countries we operate in.

We are now looking for a Product Design Engineer, with strong background in Mechanical Engineering to join the Engineering Team. The individual is responsible to prepare and generate detailed engineering work instructions and procedural specifications, provide technical support to sales function, guide and supervise junior product engineers for day to day work order preparation and perform other assigned duties as and when required. Work scope covers all OMS locations across the region.

Individuals with relevant product design experience in Conductor/Pipe Connectors, Wellhead Systems, Valves, Actuators, Choke, and/or Downhole Systems will be highly considered for this role.