· Good knowledge of engines especially slow speed engines which is a must; experience with medium, high speed diesel and gas engine would be an advantage.

· Possesses good leadership attributes, able to lead a team of technicians to achieve given task.

· Independently to perform inspection, installation (incl. engine alignment), repair, upgrading, troubleshooting and overhaul of diesel engines and auxiliary equipment.

· Ability to communicate with customer/ship owner reps/Class/sub-contractor including arrangement of work/entry permit through email and phone.

· Be prepared to travel extensively.

· Able to prepare a hand-written work done, with data recorded as per format templates and service report with photos, upon completion of job.

Responsiblities :

1) To manage and coordinate site steel structural Work.

2) Oversee operation on a day to day basis.

3) Ensure the works are done in safety, on time and within budget.

4) Mediate on site conflicts.

5) willingness to work a flexible schedules.

Qualifications :

1) Degree in Structural Engineering.

2) 3-5 years experience in a construction environment.

3) Budget Management experience require.

4) Valid class 3 Singapore driving licence.

We are looking for Electrical Engineers to expand our team.
Candidates with no experience are welcome to apply.

Responsibilities:

• Draw or modify electrical and GA diagrams or write engineering specifications to clarify design details and functional criteria of the equipment with respect to customers' requirement
• Conduct inspection and quality check of electrical equipment
• Conduct installation and troubleshooting of electrical equipment
• Set up and operate test equipment for calibration or configuration of electrical equipment
• Keen mind on quality management, with good documentation, continuous improvement of processes.
• Keen mind on operational planning to ensure good continuous supply of equipment for customers and internal requirement
• Support sales personnel for technical clarifications with customers
• Involve in pre-sales activity of machinery sales, e.g. sizing of generators, studying of tender documents etc.

Requirements:

• Minimum Diploma in Electrical Engineering or any relevant course
• Candidates with no experience are welcome to apply
• Ability to read and amend schematic drawings & circuit drawings
• Experience and knowledge in generators a plus
• Excellent interpersonal and communication skills

DUTIES/RESPONSIBILITIES:

Production Planning & Scheduling:

• To manage the day-to-day operations of the warehouse, including production processes, and logistics operations, ensuring efficiency, quality, and timely delivery of products.
• To schedule the maintenance of tools and equipment to support production plans
• To ensure proper functioning of production machine and identify the repair needs and routine maintenance of production equipment
• To organized & upkeep all production & administration documents for traceability & record.

Staff Management:

• To communicate regulary with upper management regarding problems or issues impacting production
• To lead and motivate the production/warehouse team, providing guidance, coaching, and support to ensure high performance and morale.

Quality Control:

• To ensure all production processes meet quality standards, implementing control measures to maintain consistency.

Process Improvement:

• To identify and implement efficiency-boosting improvements, tracking key performance indicators (KPIs) to enhance productivity.

Safety & Compliance:

• To oversee day-to-day activities on the production floor
• To ensure compliance with safety regulations and standards, implement safety protocols and procedures, and promote a culture of safety within the production workplace.

The successful candidate will be a demonstrated self-starter with a proactive, hands-on approach, possessing excellent interpersonal, decision making, team work & communication skills.

REQUIRED SKILLS/ABILITIES:

Possess a Nitec/Diploma/Degree in a relevant discipline

Good to have relevant working experiences in production/manufacturing field

Industry/ Organization Type: Workshop & Manufacturing

Strong knowledge of production processes, quality control, and safety regulations.

Proven leadership and team management skills.

Excellent problem-solving and communication abilities.

At least 3 years of experience is required for this role

This position will entail travelling within the region and assignments on marine construction barges offshore during installation works.

RESPONSIBILITIES

• Directly responsible on all engineering, planning, loadout, materials and all other technical services essential to support the construction and installation activities at the offshore worksite
• Make sure that all project preparation is in order and that construction personnel fully comprehend and properly apply the installation procedures' details.
• Co-ordinate and request from the Offshore Construction Manager or barge Foreman any resources required by his subordinates
• Review project planning with a view to improving on the completion date, if possible during implementation
• He shall at all times know the current progress of the project with respect to planning and should be able to give details of why project is ahead/behind schedule at all times

REQUIREMENTS

• Technical / Professional: Bachelor Degree / Diploma in Civil Engineering is preferred
• Possess a dynamic and outgoing character that can communicate with all working levels
• Willing to travel overseas and work on site

APPLICATION ENGINEER

We preferred direct hiring, not through agent. Do not call for agency

Highlights

• Monday to Friday, 5 days work week – 9am to 6pm
• Multinational Organisation (MNC)
• Within walking distance from Joo Koon MRT station
• Positive and friendly environment
• AWS and Variable bonus
• Group healthcare and personal accident insurance
• Annual salary increment

Responsibilities

1. Provide technical, tender pre-qualification & commercial supports to sales team.
2. Provides technical and commercial supports to customers and insures maximum service is provided in all customers' contacts and communications.
3. Coordinates with company's business units on technical and commercial issues, work closely on quotation strategy.
4. Technical order administration.
5. Utilises all the communication devices to provide engineering information, in support of WEG product quotation, to existing and potential customers.
6. Coordinates with WEG Authorised Service Centers in providing technical support to Distributors and Customers.
7. Attend to all Distributors', OEM's and Customers' technical inquiries on all WEG products.
8. Liaises with WEG Authorised Service Centers on all aspects of motor repairs including warranties and service reports in the territories.
9. Perform other administration / assignments which management may assign from time to time.

Requirements & Preference

• Proficient in both English and Mandarin at a business level is essential for liaising with ASEAN customers
• Basic computer skills in Microsoft Word and Excel
• Basic Knowledge of Electric Motors is an advantage.

Please submit your application indicating the below information:-

• Current and expected salary
• Notice period/ availability date to start work
• Reason for leaving (last job)

Job Responsibilities:

• Lead and direct cross-functional team in program execution
• Ensure proper qualification of new projects and successful implementation of programs in the production/manufacturing unit
• Track and monitor project progress to ensure project schedules and cost objectives are met
• Actively follow on sales leads and take lead in business development
• Serve as primary technical contact with customers on strategic or politically sensitive issues
• Provide support to BD manager in generating quotation for molding projects involving new toolings
• Provide customer support and perform in BD activities to direct customers; Serve as primary technical contact with customers on strategic or politically sensitive issues
• Work with Manufacturing on developing and establishing workflows and production concepts (to optimize production efficiency &meet customers’ requirements)
• Identify and specify engineering requirements for new projects
• Initiate equipment procurement activities for new projects when needed (with Purchasing)
• Plan and execute tooling qualification activities with supporting groups to achieve successful project execution
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Job Requirements:

• Diploma/ Degree in Mechanical Engineering or related
• Minimum 3 years of working experience in project management & production process
• Plastic injection moulding and mould assembly background preferred

Note

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

We are seeking a Quality Assurance Engineer skilled in Manual software testing to play a key role in the product development process and contribute in delivering high-quality software solutions that meet the clients' needs.

• Competitive remuneration package (up to $4,000 + AWS + VB).
• Hybrid working arrangement.
• Gain valuable skills in software testing methodologies with opportunities for professional development and career progression in QA.

Responsibilities:

• Review and analyze requirements, specifications, and technical design documents to provide constructive feedback.
• Develop detailed, comprehensive, and well-structured test plans and test cases
• Estimate, prioritize, plan and coordinate testing activities.
• Design, develop and execute automation scripts using various automated testing tools .
• Identify, document, and track bugs, and perform thorough regression testing once they are resolved.
• Collaborate closely with development and project management teams to ensure seamless SIT/UAT processes.
• Provide support in addressing issues encountered during testing and implementation phases, ensuring swift resolution.
• Champion the incorporation of cutting-edge technologies, methodologies, and tools within Agile software environments.

Job Requirements:

• Singaporean only.
• Minimum of 2 years experience in Software testing (Web-based application).
• Proven experience in software quality assurance with a strong proficiency of QA methodologies, tools, and processes.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Prior experience in white box or black box testing.
• Prior experience in Junit framework and Java programming will be an added advantage.
• Prior experience in creating clear and concise test plans and test cases.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

• 5 days, Alexandra (South-West), walking distance from MRT
• $4200 - $4800 basic, 1mth AWS,performance bonus
• Handphone allowance

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• At least 1 year of relevant experience
• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

The Mercedes-Benz AG Group CISO heads Mercedes-Benz’s Global Cyber Security Department (based in Stuttgart, Germany). We are looking for a Cyber Security SIEM Use-Case Engineer to join our Cyber Intelligence and Response Centre (CIRC). This role is crucial for the engineering, development, and continuous improvement of threat detection use-cases within our SIEM . You will also be involved in the engineering and development of custom rules to detect potential threats swiftly and creating transparency to map existing detection capabilities to the MITRE ATT&CK framework.

Key Responsibilities:

• Proactively create, test, and tune new detection use-cases in the SIEM
• Review and enhance existing detection use-cases using Machine Learning or User & Entity Behaviour Analytics (UEBA).
• Map detection use-cases to the MITRE ATT&CK framework to assess SIEM monitoring coverage.
• Perform regularly updates to threat detection engineering playbooks, processes, and documentation.
• Collaborate closely with the SOC to challenge and improve detection and prevention capabilities.
• Identify and implement SIEM use-cases to address blind spots.
• Coordinate with the log onboarding team and SIEM architect to validate new log sources for compliance and improve SIEM backend performance.
• Collaboration with Service Operations team to address challenges, process fulfillment, documentations, and improvement of Service Operations Quality.
• Provide governance on topic which related to operational stability.

Join us to play a pivotal role in enhancing our cyber security measures and protecting our global operations.

QUALIFICATIONS

Specific Knowledge

• Intense knowledge in using Splunk Enterprise Security (ES)
• Intense knowledge in developing and tuning detection use-cases (Correlation Searches) in Splunk based on Data Models
• Experience in Machine Learning and Risk Based Monitoring in Splunk is an advantage
• Ability to analyse and interpret security logs and events to identify potential threats and attack patterns
• Experience in validating data source compliant using the common interface model (CIM)
• Experience of setting up and utilize data models in Splunk
• Deep understanding of cyber security concepts to create detection use-cases targeting various phases of attack lifecycle
• Understanding of MITRE ATT&CK framework and detections of various tactics and techniques
• Experience and capable of creating interactive dashboards, alerts, reports in Splunk

Experience

• Degree from a reputable university or significant course work in Computer Science, Networking, engineering or other computer-related fields of study.
• At least 3 years of experience with demonstrable skillsets in SIEM use-case engineering, with over 5 years of experience
  in cybersecurity
• Previous relevant experience working in a security operational role, ideally within a Corporate, Military, or Police environment; engaging with and responding to a diverse array of internal stakeholders, including senior management
• Have good emotional intelligence and is a proven team player
• Rational and calm under pressure
• Fluency in the English language
• Effective oral and written communication skills
• Good timekeeping ability to cope with a tight deadline and achieve operational objectives
• Self-motivated with the ability to carry out assigned tasks with minimum supervision

This position is based in location Singapore. A valid and approved work visa is required for employment in Singapore in accordance to local labour law regulations. We regret to inform you that only shortlisted candidates will be notified.

· Good knowledge of engines especially slow speed engines which is a must; experience with medium, high speed diesel and gas engine would be an advantage.

· Possesses good leadership attributes, able to lead a team of technicians to achieve given task.

· Independently to perform inspection, installation (incl. engine alignment), repair, upgrading, troubleshooting and overhaul of diesel engines and auxiliary equipment.

· Ability to communicate with customer/ship owner reps/Class/sub-contractor including arrangement of work/entry permit through email and phone.

· Be prepared to travel extensively.

· Able to prepare a hand-written work done, with data recorded as per format templates and service report with photos, upon completion of job.

The role is primarily to support the Binnies Singapore office to secure and deliver the Coastal and Flood Risk projects in Singapore. In addition, the successful individual will require to provide support to UK offices to deliver their Flood, Coastal, and Maritime projects.

It is primarily a technical role involving participation in maritime and coastal related civil engineering projects and studies. The individual will require performing design tasks, various studies, engineering management, client liaising, and communicating with other teams and offices.

The individual may need to work as a coastal specialist working closely with the same discipline and other multidisciplinary teams. This is a great opportunity for the successful candidate to develop his/her technical and engineering management skills, particularly in various types of flood, maritime and coastal projects, and obtain international experience.

The key duties and responsibilities include but are not limited to:

• Design of coastal and coastal related structures
• Undertake various coastal studies
• Perform the projects/tasks within the agreed budget and programme
• Client liaising
• Attending meetings both internal external
• Progress monitoring & reporting
• Proposal preparation

Required Competencies

• CPD in the relevant specialist skill area
• BSc or MEng (Hons) Coastal Engineering
• Specialist knowledge of areas such as metocean studies, feasibility studies, Beach and shore management plan preparation, and detailed design
• Coastal engineering knowledge (tide, current, waves, wave overtopping, rubble mound structures, tidal and storm surge barriers, coast protection works)
• Sound knowledge of BS Maritime & Eurocode codes and industry-standard guidelines such as CIRIA and other relevant international standards and guidelines
• Performing calculations and desktop studies with limited guidance
• Project report writing
• Proposal writing
• Understands support needed by junior staff
• Team player
• Adaptable
• Experience work in multidisciplinary coastal projects
• At least 10 years of experience in planning, design and/or implementation of coastal, marine, reclamatin infrastructure projects
• Experience in project management in the planning, design and/or implementation of coastal, marine, reclamation infrastructure projects is a plus point
• Experience in client liaising and leading technical meetings

Education & training:

• BSc or MEng in Civil and Coastal Engineering
• A registered Professional / Chartered Engineer under the Civil / Coastal Engineering Discipline is a plus point

Background & experience:

• Post-graduation consultancy office experience

Knowledge base:

• Coastal engineering design & studies
• Knowledge of Eurocodes/BS 6349/CIRIA Guidelines

Skills:

• Site assessments
• Design of coastal structures
• Metocean studies and surveys
• Feasibility studies
• Good experience in using design software
• Excellent written and oral communication skills
• Client liaising
• Excellent interpersonal skills

Personal attributes:

• Proven ability to carry out design and other tasks reliably
• Always seeking improvement in design and delivery performance
• Recognises client needs and delivers solutions
• Self-motivated
• Willing to make international travel for both short and long terms assignments with a short notice.

RESPONSIBILITIES:

• Post-sales activities of Cybersecurity or Network Performance Monitoring products
• Involve in Large-scale (Local & Regional) Project Implementation
• Provide on-site implementation services including testing, deployment & documentation
• Provide technical support in ensuring customer satisfaction
• Analyse and clarify customer queries though troubleshooting and researching existing
  knowledgebase articles/known issues
• Be on routine standby to support 24x7 maintenance support calls
• Requires the ability to communicate issues clearly and concisely

REQUIREMENTS:

• Bachelor's degree or Diploma in Cyber Security, Computer Science, Computer Engineering or related field
• At least 1-2 years relevant experience in IT industry providing network support and
  administration.
• Equip with knowledge & experience in networking such as routing and switching technology.
• Possess CCNA or CCSA certification.
• Able to work independently as well as in a team environment.
• Willing to work hard and eager to learn about new technologies.
• Polite and able to communicate well to the clients.
• Analytical and possess good troubleshooting skills.
• Willing to work extended hours and on standby duty.
• Excellent interpersonal and communication skills.
• Independent and motivated.

We have an immediate requirement for a senior project engineer, who has the capability to drive the project to completion within the time and cost control requirements.

Some of the key attributes that we are looking for:

• plan and develop an understanding of the owner’s goals, and align the project to match.
• foresee potential challenges and address them before issues arise
• contribute to solutions
• unblock the routine obstacles that inevitably occur on fast track projects.

To be successful in this role you will have:

• Min 10 years of project management experience, particularly in a GMP environment
• Demonstrated understanding and experience of cost estimation and control, budget management, design review, risk assessment, safety & quality control and project scheduling.
• Ability to interpret construction contractual documents and contract modifications.
• Vast knowledge of all local legal issues, permits, and building codes involved
• Excellent organisational skills with an ability to produce accurate work to project deadlines.
• Excellent interpersonal and communication skills.

Job Description:

• Assist the Project Manager in the planning, design and day to day running of geotechnical engineering projects undertaken by the company
• Prepare design calculations and technical drawings for the projects
• Determine operation requirements and assist Project Manager in preparing schedule
• Liaise with sub-contractor and consultants for the execution of works
• Ensure timely delivery of projects according to schedule
• Update project records for reporting purposes and submission of reports
• Attend site meetings and resolve technical/operational issues independently
• Undertake ad-hoc duties assigned by Project Manager related to project execution

Requirement:

• Min Bachelor Degree in Civil Engineering
• Min 2 years of experience in bored pile works
• Able to work in fast pace environment and have a passion in foundation/ geotechnical engineering
• Able to work 6 days

Job Description:

• Assist in coordinating, scheduling, planning, and supervising purchases, production, and site management.
• Lead, monitor, review & implement project scheduling, purchasing, installation, commissioning, and operation of equipment/machinery to ensure that all objectives of safety, completion time, technical aspects, and profitability are met.
• Preparation of project documents and engineering drawings
• Work with Engineering Team to handle project/engineering document/drawings and ensure proper tracking and distribution.
• Liaise with vendors/subcontractors on equipment/material submission approval, delivery & receipt of goods, and commissioning of equipment.
• Identify and resolve technical problems and ensure that the expenditure of the projects is kept within budgeted costs and completed within the schedule.
• Ensure purchasing activities, e.g. sourcing, evaluation, and recommendations for purchase, are carried out in a timely and accurate manner.
• Liaise with main contractors/subcontractor/site engineers regarding on-site requirements and progress
• Manage and arrange site works with sub-contractors, check, monitor, and evaluate their progress.
• Attend site meetings with the owner, consultants, and main contractors on all matters relating to project operation and coordination
• Conduct site surveys before delivery and involve in site commissioning works.
• Supervise site works and conduct periodic safety inspections and attend WSH meeting

Job requirements:

• Min Diploma in Electrical/Mechanical Engineering
• Min 3 Years of working experience in a similar industry
• Strong communication skills, both written and spoken
• Has good document control & administrative skills.
• Good working knowledge of MS Office
• Ability to work independently as well as in a team environment
• Ability to read General arrangement drawings, Layout drawings, shop drawings, electrical single line diagrams, Gantt charts, etc
• Ability to work under pressure of meeting timelines
• Ability to identify potential or actual causes of delay and take preventive/ remedial actions
• Self-motivated and results-oriented
• Building Construction Safety Supervisor Course (BCSS) certificate is highly preferred.

Fresh graduate is also considered for a junior position.

Responsibilities:

• Perform technical solutions in medium or large size engineering in centrifugal inline pump products and packages (like fire water pumps packages in line with NFPA 20 standard guideline).
• Create engineering drawings and specifications for components, products and mechanical designs working with internal and external customers through the development and approval process.
• Maintain quality and accuracy of product master data in ERP system as per latest updates required by sales, purchasing, production and aftermarket.
• Provide technical support to customer solution engineering, product improvement within Engineering and to other stakeholders.
• Develop, maintain product data books, instruction and operation manuals.
• Work with Operations, Marketing, Purchasing, Production, Sales, executive management, and others to develop winning solutions.
• Coordinate with and consult with other team members to design or detail components.
• Proactive technical communication, execution with suppliers, customers, and internal stakeholders during end-to-end project execution.
• Identify, mitigate, monitor and report risks in own responsibility area.
• Work proactively to promote teamwork at all levels of the company.
• Other tasks and special projects as assigned.

Education & Qualification:

• Bachelor’s Degree in Mechanical Engineering AND 5+ years of experience in product development (preferably in pump products and systems in marine applications such as package engineering, hydraulic power packs and diesel engine driven systems).
• Experience with mechanical designs involving rotative equipment, steel structures, piping required.
• Ability to use AutoCAD, 3D CAD required, good understanding of CAD & GD&T standards.
• Good knowledge on sustaining engineering and ability to use enterprise software.
• Basic understanding centrifugal pumps and pumping systems.
• Efficient using Microsoft Office (Word, Excel, Outlook, PowerPoint, etc.) and the internet.

Primary Responsibilities:

• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 3 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

- Electronics & Electrical Engineering background

- Strong analytical skills, including the ability to find creative solutions and can work independently

- Experience with developing prototypes and conducting tests to validate designs

- Knowledgeable in IoT Systems, including embedded systems such as microcontrollers, graphical user interface(UI), sensors etc

- Proficient in programming languages such as Embedded C, C++, Python, Arduino, Xilinx and Vivado etc. or equivalent

- Knowledgeable in Circuit Design and PCB Design software such as Altium, Easy EDA, etc. or equivalent

• Review and interpret construction drawings, method statements, and risk assessment forms for job and tender submissions.
• Serve as the main liaison between the site office and headquarters to facilitate the integration of e-invoicing systems.
• Coordinate with various departments to ensure seamless communication and workflow.
• Assist in promotional and marketing initiatives to revamp the company's corporate website.
• Ensure compliance with all relevant regulations and industry standards.
• Maintain accurate records and documentation of all site activities and communications.
• Strong understanding of construction drawings, method statements, and risk assessments.
• Experience with integrating e-invoicing systems is preferred.
• Background in promotional or marketing activities.
• Excellent communication and interpersonal skills.
• Proficient in Microsoft Office Suite and relevant industry software eg. Asurix.
• Ability to work independently and collaboratively within a team.
• Strong organizational skills and attention to detail.

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

We are seeking a highly skilled Cloud Engineer to contribute to significant government projects!

• Join a team that utilizes technology to enhance the lives of Singaporeans.
• Agile development culture to promote continuous learning and growth.
• Competitive remuneration package. Hybrid working arrangement.

Responsibilities:

• Design, implement, and manage AWS cloud infrastructure to support scalable, reliable, and secure services.
• Design, implement, and maintain CI/CD pipelines to automate software build, test, and deployment processes.
• Maintain configuration management, build, continuous integration, and deployment tools.
• Source code management and collaborate with development teams on branching strategies and versioning.
• Monitoring automation to effectively detect/predict/prevent issues in the environment and code base.
• Streamline operational tasks, monitoring, and infrastructure provisioning.
• Design and implement production infrastructure architecture based on application requirements, ensuring scalability, availability, and security.

Job Requirements:

• Singaporean only.
• Minimum of 3 years of relevant Cloud/DevOps experience.
• Proficient in containerization technologies such as Docker and Kubernetes.
• Proficient in configuration management systems (Terraform, Packer, Ansible).
• Proficient in AWS (Related certification will be advantageous).
• Strong scripting skills in Python, Bash, JavaScript and shell scripting.
• Prior experience in government/public-facing projects is advantageous.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

We are seeking a highly skilled Senior Cloud/ DevOps Engineer to contribute to significant government projects!

• Join a team that utilizes technology to enhance the lives of Singaporeans.
• Agile development culture to promote continuous learning and growth.
• Competitive remuneration package.

Responsibilities:

• Design, implement, and maintain CI/CD pipelines to automate software build, test, and deployment processes.
• Implement monitoring solutions and manage monitoring and alerting tools.
• Maintain configuration management, build, continuous integration, and deployment tools.
• Source code management and collaborate with development teams on branching strategies and versioning.
• Streamline operational tasks, monitoring, and infrastructure provisioning.
• Design and implement production infrastructure architecture based on application requirements, ensuring scalability, availability, and security.
• Integrate security best practices into the software development lifecycle and ensure compliance with relevant standards and regulations.
• Prioritize and execute tasks in a high-pressure, fast-paced environment.

Job Requirements:

• Bachelor’s Degree in IT, Computer Science, or related fields.
• Minimum of 5 years of relevant DevOps experience.
• Knowledge and experience in configuring automated build, test, and deploy pipelines to streamline the software delivery process.
• Experience in containerization technologies such as Docker and Kubernetes.
• Experience in configuration management systems (Terraform, Packer, Ansible).
• Experience in AWS (Related certification will be advantageous).
• Prior experience in Linux server administration, and shell scripting.
• Working experience in Agile environments or projects (Scrum/Kanban).

Interested candidates may apply via email to [email protected] (indicating Job ID J44445 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – Outsourcing Team
ScienTec Consulting Pte Ltd – 11C5781