Under the Air Traffic Management Research Institute (ATMRI) (http://atmri.ntu.edu.sg/), Nanyang Technological University, you will be part of a research team to study the use of Artificial Intelligence and Data Analytics in Air Traffic Management Systems. The selected candidate will work on developing innovative machine learning models to address key challenges in the future airspace system, including traffic prediction, optimization, and safety enhancements.

Key Responsibilities:

• Develop and implement machine learning models for air traffic prediction, flow management, and conflict detection.
• Apply deep learning, reinforcement learning, and other advanced AI techniques to improve decision-making in ATM systems.
• Work with real-time and historical air traffic data (e.g., ADS-B) to build predictive models for air traffic demand and capacity.
• Collaborate with a team of researchers and engineers to integrate machine learning models into ATM decision support systems.
• Analyze the performance of machine learning models and optimize their scalability for real-world airspace management applications.
• Participate in project meetings, prepare research reports, and contribute to publications in top-tier academic conferences and journals.
• Assist in the preparation of project proposals and technical documentation.

Job Requirements:

• Master's degree in Artificial Intelligence.
• Evidence of developing Machine Learning and Optimization models for ATM system.
• Strong programming skills in Python.
• Good English writing and communication skills - for research purposes
• Independent and team player.

We regret that only shortlisted candidates will be notified.

Permanent, Full Time

We are seeking candidates with:

· A diploma/degree in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.

· At least 10 years of experience in Engine Repair & Maintenance.

Roles & Responsibilities

· Perform the repair, maintenance, or overhaul of marine diesel engines 2 & 4 stroke.

· Comply with all the requirements to carry out the jobs in the shipyards or anchorages.

· Lifting and shifting heavy components of engine back to the workshop for repair/reconditioning and vice-versa.

· Ensure prompt response and smooth communication with the customers

· Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

· Relevant marine / mechanical / engineering qualification

· Rich hands-on experience in trouble-shooting, maintenance and repair is a must.

· Willing to work in a shipyard/anchorage environment

An attractive remuneration package and career growth opportunities await the successful candidates. Interested applicants are invited to email with detailed resumes indicating their current and expected salary.

Company:

Sopra Steria is a listed European tech leader specializes in Consulting, Digital Service, and Software. We have 60,000 employees worldwide located in different regions (Europe, North America and Asia), whereby Singapore is the HQ for APAC. EvaGroup Asia Pacific is part of Sopra Steria I2S APAC, in charge of Infrastructure, Cloud and Cybersecurity services.

Additional Description:

For this position, we are looking for an ICT Security Engineer proficient in Elastic Stack to assist one of our clients – a leading global investment bank.

 The team is looking for an ICT Security Engineering professional to increase its capability to improve the detection & reaction to Cyber Threats by:

• Deploying, maintaining and improving the new SIEM infrastructure

The new joiner will work in close collaboration with Production Infrastructure & Observability teams. Finally, the new joiner will fully be part of the Production CSIRT / SIEM Engg team with the opportunity to expand the scope of activities within the team.

Responsibilities:

• Install and administrate the servers of the SIEM Infrastructure
• Develop automation on the different tasks and self-service tool
• Participate to the integration of new technologies logs
• Support logs parsing using custom parser/GROK development
• Project management
• Be a full time member of the Production CSIRT / SIEM Engg team and participate to the various activities of the team
• Contribute to the Permanent Control framework for implementation of policies and procedures in day‐to‐day business activities, such as Control Plan.
• Comply with regulatory requirements and internal guidelines.
• Contribute to the reporting of all incidents according to the Incident Management System

• Production experience across the following technologies:
• Working knowledge of Elastic stack (Elasticsearch / Logstash / Kibana / Beats) including data ingestion, management, monitoring & analytics. (Mandatory)
• In-depth experience with Kafka
• Good working knowledge of Linux (RedHat/Ubuntu)
• Programming skills (Python or Bash) is appreciated.
• Experienced production support engineer
• Platform integration skills are a plus - Experience in installation, configuration, documentation and administration of multiple pre-production and production platforms in both virtual and physical environments.
• Experience & skills in automation tools (e.g. Ansible) & DevOps pipelines are appreciated.

Specific Requirements:

• Candidate must have a overall 7 or more years of experience with minimum 4-5 years on relevant scope ie. Expertise in handling ELK stack for large platform or architecture.

• Regular team buildings
• 18 leave days / year
• Insurance: Hospitalization, GP, Dental and Optical
• Annual bonus
• Working hours: from 9am to 6pm, Monday to Friday
• Training and certifications paths

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Supporting project communication systems Installation, Configuration, Integration and Testing at customer site to ensure timely project delivery.
• Working closely with subcontractors to ensure tasks on site are completed on schedule.
• Understanding the system and be able to perform system fault isolation and troubleshooting.
• Collaborating with fellow engineers / engineering team in system setup, system validation and problem resolution.
• Supporting the generation of project documentation

Requirements

Primary Work Location: Jurong East Hub

Working Hours : 8.30am – 6pm

Qualification : Diploma in Mechatronic, Mechanical, Electrical & Electronic

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

In this role, you will have the unique opportunity to engage in field service, site installation, and perform Quality check on all completed machines.

Job Responsibilities:

• Provide site machine installation and maintenance.

• Attend to service call.

• To conduct in-house and on-site training for customer.

• Investigate and handle customer's complaints.

• Quality check on all completed machines to ensure stringent quality compliance before delivery to customer.

Requirements:

• Diploma in Electrical or Mechatronics Engineering

• Minimum 2 years of field service or QA experience in Industrial Automation projects

• Ability to build strong relationships, work with customers to solve problems

• Good team player with excellent interpersonal and communication skills.

• Meticulous, Quality conscious and Problem solving/troubleshooting skills.

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

• Marine & Offshore industry
• Basic $3000 - $4200
• 5 days (8.30am – 6.00pm)
• Location: West Area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).

Qualifications

• Min Diploma/ Degree in Electrical with no working experience are also welcome.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

CD Engineers is a well establish engineering company dedicated to providing practical and cost-effective designs for storage and use of flammable and hazardous material in industrial applications to our client from conceptual to detailed design to authorities permitting and project construction.

To support our growth, we require energetic innovative engineers to assist in:

· Conceptualizes concept and schematic designs.

· Execute feasibility studies and presents design proposals.

· Preparation of tender documentation, schedules and specifications.

· Liaises and coordinates with clients, consultants and contractors.

· Ensure design quality and authority compliance.

· Attend design and project meeting.

· Prepare work schedule and progress report.

Requirements:

· Degree or Master in Sciences or Engineering.

· Fresh Graduate will be considered for entry level.

· Strong in communication skill and proactive in solving issues.

· Ability to work independently and within a team.

· Those with experience in building services industry background are welcome.

· In-house training for specialised skill will be provided.

Introduction

Our mission is to improve workplace productivity through customisation of software and innovative solution. The speed of Mobile Apps and the capabilities of Cloud Technologies allow us to offer a range of solution for companies looking to digitalise their daily operation work. The Future of Workplace aims for work to be completed efficiently at any time.

We are looking for developers with a goal towards becoming a full-stack developer. That means he/she is confident and able to code for both frontend and backend (serverless) development. If you have a passion for building your own apps and wanting to spend more time in this field, we welcome you to join and grow with us as we aim to expand our list of in-house products.

Responsibilities:

1. Develop new projects on time with the coding patterns and templates in sync with other projects.
2. Bug fix and improve existing projects whenever requirement comes in.
3. Write reusable code that can be shared across all projects.
4. Check code and guide other developers.

Requirements:

1. B.S in Computer Science or related fields from accredited and reputable institutions.
2. Oversee development of all iOS or Android projects.
3. 5+ years of experience in software development.
4. Strong programming background and proficient in Objective-C / Swift or Java / Kotlin / node.js and iOS or Android SDK
5. Deep understanding of Object-oriented design, memory management, performance optimisation and how multi-threading and asynchronous coding works.
6. Experience with using AWS Cloud Services is a plus.

• Responsible for the design, implementation and monitoring of all electrical related works at site
• Detailed design of all Electrical related works
• Interpret tender drawings and studies the contract documents and applicable standards or specifications prior to design of the Electrical works
• Manage directly and provide engineering and technical supports to all the electrical work groups at site
• Coordinates with Client / Consultant’s representatives for any site instructions and inspection of works
• Support the Construction Manager in accomplishing all the goals and targets for the electrical groups at site
• Ensure that all the works done are in accordance with the approved construction drawings, contract documents, project specifications, and all applicable standards whether local, national or international standards
• Ensure that all site works are done according to all applicable quality standards
• Directly responsible for the safety of all electrical group personnel of the project by ensuring that the project execution will be done according to all applicable health, safety, sanitary and environmental standards.

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attend meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensure that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provide written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

QUALIFICATIONS, SKILLS & EXPERIENCE REQUIRED

• Minimum 5 years’ experience as an Electrical Engineer within a similar industry.
• Degree in Electrical Engineering with more than 5 years’ experience in basic design requirements, fabrication, installation, T&C and all site activities related to all electrical works.
• Familiar with all electrical engineering methodologies as well as the corresponding equipment, materials, consumables and tool allocations related to electrical works.
• Ability to work as part of a close-knit management team and manage numerous activities / projects simultaneously – both short and long term.
• Ability to work on own initiative and with the minimum of supervision
• Outgoing personality essential for dealing directly with Clients and their design team
• Demonstrated ability to work independently to organize and prioritize demands, handlemultiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast-paced environment with multiple and competing demand

Responsibilities:

• Assist Piping Lead Engineer and execute the tasks assigned by Lead Engineer with no or minimum supervision.
• Lead a group of piping engineers and designers to execute the tasks assigned by Lead Engineer or/and monitor the work executed by engineering design house where applicable.
• Review and monitor engineering design progress related to piping work scopes.
• Prepare and raise technical query (TQF) and engineering variation order (EVO) related to piping for additional work scopes.
• Align the piping design output (such as piping isometric drawing, pipe spool drawing, etc) with construction team to ensure all the information required by construction teams are incorporated.
• Understand department and project specific design workflow.
• Understand Contract Specification and project requirement summary.
• Understand Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and piping routine requirements.
• Understand equipment layout plan (include escape route, maintenance space, mechanical handling, other equipment).
• Understand non-piping design related requirements such as fabrication, erection, painting, QA/QC, testing and commissioning.
• Responsible for ensuring that all works meet scope and technical quality of the project and comply with project requirements.
• Monitor P&ID revisions and ensure the compliance between piping 3D model with latest P&ID.
• Monitor design input need date and data required to execute the piping design works.
• Monitor 3D model clash and design review comments / punch lists.
• Monitor the comments from Client and Classification Society.
• Monitor all the piping related interface points.
• Monitor all the hotwork, tank’s coating and drydocking related activities where applicable.
• Monitor piping procurement status and surplus material due to drawing revision.
• Monitor all the hold items that affecting piping design completeness.
• Monitor and control the development of piping weight.
• Ensure proper communication and workflow are well established between piping stress team with pipe routine and pipe support designer team. Closely monitor the compliance between piping 3D model with the latest pipe stress analysis report.
• Review/comments piping arrangement, isometric and pipe supports drawings from piping designers.
• Review/comments on piping calculations carry out by other piping engineers/ subcontractors (e.g. pipe stress analysis report, flow master report, surge analysis report).
• Review/comments technical proposal from vendor.
• Review/comments vendor certified Document (VCD).
• Monitor and control drawing revisions especially when construction already started.
• Ensure proper communication and workflow are well established between piping designing team with construction team. Monitor the compliance between piping construction drawing (piping isometric and pipe support drawing) with the latest 3D model.
• Monitor the piping design database completeness (such as 3D model attributes, etc) to meet the project Digital Engineering requirements.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Onboard vessel to carry out inspection at site.
• Provide support to piping construction, QA/QC and other non-engineering design related activities such as inspection, coating, painting, welding, test packages, etc.

Requirements:

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Min. Bachelor Degree in Mechanical Engineering.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.
• Good knowledge in Piping Design.
• Good knowledge in International Standards related to Piping such as ASME, ASTM, API and Classification Society Rules and Regulations.
• Good skill in Excel is preferred.
• Experience in using AutoCAD, Naviswork, Smart Plant, Aveva, Cadmatic, etc. is preferred.

A welding supervisor in Singapore manages welding operations on construction sites, ensuring that projects are completed on time and within budget. Their responsibilities include:

• Supervising welding activities: Ensuring that welding work meets quality standards, project specifications, and safety protocols
• Scheduling and assigning tasks: Optimizing workflows to meet project timelines
• Inspecting welding work: Verifying that welding work is structurally sound and complies with regulatory standards
• Providing technical guidance: Training welders to improve their performance and skills
• Collaborating with other teams: Working with project managers, engineers, and other construction supervisors to integrate welding activities into the broader project plan
• Maintaining records: Monitoring and recording welding progress, equipment usage, and team performance
• Ensuring proper equipment use: Ensuring that welding equipment is properly used, maintained, and calibrated
• Identifying and addressing issues: Identifying potential issues on-site and taking corrective action
• Maintaining a safety culture: Enforcing health and safety regulations, promoting safe work practices, and conducting safety briefings

About The Role

We're looking for a curious and innovative Product Reliability Engineer to join our Middleware team at Visa. Here, you'll be part of a diverse group of problem-solvers who ensure billions of transactions flow seamlessly across the world's largest payment network.

What You'll Do

• Design for Reliability: Architect and implement solutions that keep Visa's middleware services running with Always On availability
• Automate Everything: Create intelligent automation for monitoring, deployment, and incident response
• Lead Investigations: Use your detective skills to solve complex technical puzzles and prevent future incidents
• Drive Innovation: Contribute to our evolution from traditional middleware to cloud-native solutions
• Collaborate Globally: Work with talented engineers across the world to build, support, and deploy middleware services.

Why You'll Love It

• Real Impact: Your code will help process millions of transactions, enabling commerce worldwide
• Growth Opportunities: Regular learning sessions, mentorship programs, and exposure to cutting-edge technology
• Work-Life Integration: Hybrid work model (2-3 days in office) with flexible scheduling
• Inclusive Culture: Join a team that actively promotes diverse perspectives and collaborative problem-solving

Your Experience & Skills

We encourage you to apply even if you don't meet every requirement. We value potential and enthusiasm over perfection.

Core Skills (Some combination of:)

• 3+ years of experience with modern middleware technologies. These might include (Tomcat, Apache, Springboot, SQS, JBoss, IBM MQ, IBM DataPower, Hazelcast, Flink, Connect Direct, SSL)
• Understanding of Linux/Unix systems, networking, cloud platforms (AWS, Azure, GCP), containerization (Kubernetes, Docker), and infrastructure-as-code tools (Terraform, Ansible).
• Proficiency with monitoring tools (Prometheus, Grafana, Datadog, etc.), logging systems (ELK stack, Splunk), and tracing tools (Jaeger, Zipkin).
• Proven track record of automating complex tasks and processes to improve efficiency and reliability using Python, Go, Java, or similar.

Technical Areas You'll Grow In:

• Cloud & System Architecture: Design scalable, resilient systems across hybrid cloud platforms (AWS, GCP, Azure)
• AI/ML Operations: Support and optimize ML model deployment pipelines and monitoring systems
• Observability & Performance: Master advanced monitoring, tracing, and performance optimization techniques
• Automation & Intelligence: Build smart alerting systems and automated remediation workflows
• Distributed Systems: Design and maintain globally distributed payment processing systems

What Makes You Thrive:

• You're energized by solving complex problems
• You believe in automation over manual processes
• You enjoy mentoring others and sharing knowledge
• You're comfortable with ambiguity and rapid change
• You value building reliable systems over quick fixes

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Information :

Working Hours : Mon~Fri 8:15am to 5:45pm

*Might required to work onboard the vessel and travel occasionally.*

Responsibilities :

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Requirements :

1. 2 years QA Experience in Marine or Industrial

2. Diploma in Electrical Engineering or ITE with relevant experiences

3. Able to speak Chinese

4. Required to work onboard the vessel and travel occasionally.

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

• Assist in organizing and scheduling manpower within the department
• Oversee projects technically, attend yard meetings as needed
• To lead a team of skilled machinists to perform precision on-site machining services on client equipment and machinery
• Set up and operate various In-situ machines for precision work
• Responsible for overseeing and coordinating all activities related to the in-situ crankshaft repairs and maintenance
• Lead and supervise a team of technicians and machinists in performing in-situ crankshaft repairs and maintenance.
• Perform tasks both on-premises and at customer sites, which could be local or international.
• Read and interpret technical drawings and documents to find repair solutions.
• Complete jobs within the shortest possible time frame and coordinate all aspects as directed by the Department Manager
• Regularly update your manager on manpower schedules and project progress. Clear communication ensures that all team members are aligned with project goals and timelines.
• Conduct machine tool preventive maintenance as needed.
• Use all prescribed safety equipment and comply with OSHA rules

COMPANY DESCRIPTION

Founded in Norway in 1996, REC Group is an international pioneering solar energy company with a strong footprint in North America, Europe and Asia. We are part of Reliance Industries Limited (RIL), a Fortune Global 500 company that shares our passion for bold innovations that empower people with clean energy solutions and drive global energy transitions. A trusted partner for customers, consumers and employees, we are “Solar’s most trusted”!

RESPONSIBILITIES

Be the key driver to ensure that REC Modules deliver world class leading top quality product through well controlled process and manufacturing flow, from material supplies to product deliveries.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be key driver to ensure improvement, qualification and implementation of new processes/products including changes and/or new product introduction, are in-line with the overall production performance enhancement targets.
• Support production line issues with appropriate and permanent corrective solution, as and when necessary.
• In plant expansion phase, work closely with process/equipment/technology and contribute to establish good product quality and specification.
• Support investment proposals and projects in order to utilize best available practice and competence.
• Support managements’ directives and projects as and when needed.
• Possessed very good ability in project management, providing key milestone, timeline and execution, overseeing the completion of project on time.

Module PD Engineer

• Candidate working in Module PD is responsible for development of the bill of materials (BOM) used in the PV module.
• Responsible for redesign of parts for cost and process improvement through alternative components, parts reduction, jigs and fixtures, and increasing yield, reducing cycle time and improving quality
• Excellent knowledge in material structure performance and provide direction of how best the appropriate materials could be introduced and change to meet the overall cost targets.

Knowledgeable in establishing, sourcing and developments of new materials, new designs and alternative vendors (such as Glass, EVA, Back Sheet, Frame, junction box, etc.) to meet the overall process, production and cost improvement targets.

• Degree in engineering disciplines (electrical, mechanical, mechatronics, material science or related discipline )
• 3 years or more experience for engineer position
• 7 years or more experience for senior engineer position
• Knowledge in product design environment.
• Knowledge of interpreting design intent for DFM and DFA
• Strong knowledge of semiconductor or Solar.
• Knowledge in Prototype PV Module design functionalities that ensure good quality and manufacturability would be an advantage
• Knowledge of product functionality of PV modules/panels would be an advantage
• Good presentation and communication skills
• Must be able to work independently and knowledgeable in project management
• Supportive in other job functions assign by superior

Nanyang Technological University’s National Centre for Research in Digital Trust (DTC) is a Trust Technology Research Centre to execute a national program to help put Singapore into a strong trust hub. The key objective is to support efforts to create a trusted digital environment for people and businesses in the digital transformation by providing businesses and consumers with greater assurance and confidence as they digitalize. For more details, please view https://www.ntu.edu.sg/dtc

We are looking for a Research Engineer to develop, implement, and oversee techniques and systems in Trust Technology and related areas such as privacy, security and blockchain, which are important components of digital trust platforms. The role will focus on emerging technologies that engenders trust and espouse the values of fairness, safety, and privacy in digital technologies.

Key Responsibilities:

• Conduct research into trust technologies testing – translating algorithms, tools, and frameworks into working prototypes that can explain how research outputs can be productised into new capabilities.
• Work closely with Centre’s researchers to design and develop system implementation work from research into the product.
• Design and build working tools that can support the technology transfer of new capabilities to research partners and can be used to showcase the value of a given research outcome.
• Write and maintain technical documentation, presentations, and papers on research into trust technologies testing, helping to educate and raise the overall competency in emerging areas of trust technologies.
• Engage global partners and researchers to understand latest trends and advance Singapore’s mindshare in this domain.

Job Requirements:

• Master’s degree in computer science/ engineering or related fields.
• Proficiency in Python is essential; experience with Java, C/C++, Go, and PyTorch/TensorFlow is a plus. Proficient with Linux (e.g., Ubuntu, CentOS) and shell scripting.
• Experience in developing and deploying machine learning models, especially in NLP and LLMs, covering tasks like data preprocessing, feature extraction, training, and evaluation.
• Strong knowledge of machine learning and deep learning techniques (e.g., knowledge graphs, machine unlearning, AI testing). Cloud platforms (AWS, GCP, Azure) and containerization (Docker, Kubernetes) experience required.
• Familiarity with Git and collaborative development tools with experience in end-to-end ML system development (data exploration, feature engineering, model training/evaluation) is advantageous.
• Solid understanding of software engineering principles and best practices and the ability to explain complex technical concepts to both technical and non-technical audiences.
• Strong analytical, problem-solving, and innovative thinking skills and a good understanding of ethical AI practices, especially related to data privacy and security.
• Self-motivated, able to work independently in a fast-paced environment with strong collaboration skills. Experience working in cross-functional teams with attention to detail and commitment to delivering high-quality results.
• Experience in research on mechanistic interpretability.
• Experience in the implementation of multi-modal LLMs or vision-language models.

We regret to inform that only shortlisted candidates will be notified.

Science Centre Singapore is dedicated to the promotion of interest, learning and creativity in science & technology through imaginative and enjoyable experiences, and to contribute to the nation's development of its human resource.

Join the Exhibitions team and create memorable experience as an Assistant Experience Engineer.

Essential Job Functions

As an Assistant Experience Engineer, you play a pivotal role in developing exhibits and experience, ensuring they operate at the highest level for the enjoyable experience for our guests.

Your responsibilities include the following:

- Exhibit checks, reporting, troubleshooting and maintenance of exhibits/exhibitions

- Carry out periodic image back-ups of our exhibits, maintaining the exhibition network and administration of the team’s knowledge management database (storage FTP server)

- Set-up and takedown of Exhibitions

- Exhibit Ideation and Prototyping

- Work on Exhibit Specifications (including providing technical advice for development projects)

Requirements

Knowledge and work experience in the following areas will be an advantage.

Diploma in Industrial Design/Product Design:

· Machining, mechanical assembly works, electrical and electronic systems, digital prototyping using CAD (computer-aided Design) software.

· Rapid prototyping, addictive and subtractive fabrication of spare parts and components for exhibits, exhibit housing and experiences.

· Operating woodworking machines such as, the bench saw, planer, routers and stand drill.

· Wood/plastics fabrication works

OR

Diploma in Information Technology or equivalent:

· Familiarity with troubleshooting basic computer hardware faults, diagnose software issues within an exhibit and resolve them

Other Skills/Abilities

Having a strong interest in taking apart or fixing things, coupled with the ability to handle basic equipment and tools useful in carrying out the duties within the galleries.

We value qualities such as professionalism, initiative, and quality service in all aspects of interaction with both internal and external customers, collaborative and enthusiastic about learning and acquiring new skills.

Shift Requirements

Rotating 5-day work shifts is a requirement, while duties on weekends and public holidays will be scheduled as and when required.

Only shortlisted candidates will be notified.

MacGregor shapes the offshore and marine industries by offering world-leading engineering solutions and services with a strong portfolio of MacGregor, Hatlapa, Porsgrunn, Pusnes and Triplex brands. Shipbuilders, owners and operators are able to optimise the lifetime profitability, safety, reliability and environmental sustainability of their operations by working in close cooperation with us.

Purpose of the position

As a Service Engineer with expertise in steel work, you will be responsible for supervising the structural steel repairs, including welding, fabrication, and modifications on Roll-on/Roll-off (RoRo) vessels and hatch covers on container vessels and bulk carriers. You will ensure that all steelwork adheres to industry standards and vessel safety regulations, while leading a team of engineers and subcontractors.

This role requires in-depth knowledge of steel structures and the

capability to manage projects efficiently and safely, ensuring high-quality service for MacGregor and third-party products when necessary

Main tasks and responsibilities

• Steel Work Supervision: Supervise structural steel repairs, including welding, fabrication, and modifications on RoRo vessels, container vessels, and bulk carriers, ensuring compliance with industry and safety standards.
• Maintenance: Perform preventative maintenance, corrective actions, and upgrades on MacGregor equipment, including RoRo ramps, doors, and hatches.
• Inspections: Conduct thorough inspections of steel structures and mechanical systems to ensure compliance with safety and quality standards.
• Project Management: Lead and manage subcontractors during larger steel repair projects, ensuring the work is completed on time and within budget.
• Customer Support: Establish and maintain excellent relationships with internal and external customers, providing technical support and feedback to the relevant teams.
• Safety Compliance: Adhere to all Quality, Health, Safety,and Environmental (QHSE) standards and site-specific safety protocols.

What you’ll need to succeed

Education:

• Diploma in Marine Engineering or an equivalent technical qualification in mechanical, marine, or steel fabrication fields.
• Engineering graduates are encouraged to apply.

Experience:

• Minimum of 5 years’ experience in supervising steelwork, particularly with RoRo/Hatch Cover systems or in marine environments.
• Strong background in mechanical, hydraulic, and steel structures is essential.
• Experience working in ports,onboard ships, and offshore environments is preferred

Skills & Competencies:

• Proficient in welding and steel fabrication techniques, with supervisory
• experience.
• Strong problem-solving abilities and the capability to lead teams and manage projects independently.
• Fluent in English; multilingual skills are an asset.
• Ability to perform under pressure and adapt to changing circumstances.

You will be part of

We offer you an opportunity to put your skills and experience into work and make an impact in our global organisation and the marine industry. You will work together with great colleagues from various backgrounds inspired by shared, ambitious goals. We value collaboration in our open and inclusive culture. With us, you will have the opportunity to develop yourself professionally. Join us to make a difference - and have fun while doing it.