1.Attend vessel performs inspections,calibration, testing and troubleshooting on electrical & automation systems

2. Service/overhauling automation/electrical equipments in workshop

3.Good communication with shipcrew and superintendent

4.Good communication with shipyard

5.Prepare reports after finished the service job

Your Job

Part of the New Product Development team, you will collaborate with cross-functional teams, including design, manufacturing, and supply chain, to mitigate risks, drive improvements, and ensure compliance with internal and external quality standards to ensure the flawless introduction of products into the market.

Our Team

Molex creates connections for life by enabling technologies that transform the future and improve lives. You will be in our Datacom and Specialty Solutions (DSS) division, which designs and manufactures an extensive product line serving customers in telecommunications, datacom, (hyperscale) data center, cloud, and storage applications.

What You Will Do

• Collaborate with cross-functional teams to facilitate risk assessment and mitigation activities during design, prototype and manufacturing phases of new product development.
• Develop and implement comprehensive quality plans that is focused on the voice of customers and adhere to required internal and external standards to achieve new product qualification.
• Support supplier quality assessments and collaborate with suppliers to achieve qualification on new products.
• Lead or facilitate problem solving and resolution of quality issues during launch, and support efforts to prevent future occurrences.
• Champion continuous improvement and lean initiatives to improve new product development and advanced product quality planning.

Who You Are (Basic Qualifications)

• Experience in new product introduction - product and process development and qualification
• Experience in quality management and advance product quality planning
• Strong interpersonal skills
• Strong analytical and critical thinking abilities

What Will Put You Ahead

• Degree in Engineering or related field
• Working knowledge of electronic assembly, testing, molding, stamping, plating and assembly processes
• Strong leadership abilities

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

Part of the New Product Development team, you will collaborate with cross-functional teams, including design, manufacturing, and supply chain, to mitigate risks, drive improvements, and ensure compliance with internal and external quality standards to ensure the flawless introduction of products into the market.

Our Team

Molex creates connections for life by enabling technologies that transform the future and improve lives. You will be in our Datacom and Specialty Solutions (DSS) division, which designs and manufactures an extensive product line serving customers in telecommunications, datacom, (hyperscale) data center, cloud, and storage applications.

What You Will Do

• Collaborate with cross-functional teams to facilitate risk assessment and mitigation activities during design, prototype and manufacturing phases of new product development.
• Develop and implement comprehensive quality plans that is focused on the voice of customers and adhere to required internal and external standards to achieve new product qualification.
• Support supplier quality assessments and collaborate with suppliers to achieve qualification on new products.
• Lead or facilitate problem solving and resolution of quality issues during launch, and support efforts to prevent future occurrences.
• Champion continuous improvement and lean initiatives to improve new product development and advanced product quality planning.

Who You Are (Basic Qualifications)

• Experience in new product introduction - product and process development and qualification
• Experience in quality management and advance product quality planning
• Strong interpersonal skills
• Strong analytical and critical thinking abilities

What Will Put You Ahead

• Degree in Engineering or related field
• Working knowledge of electronic assembly, testing, molding, stamping, plating and assembly processes
• Strong leadership abilities

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Brief Summary

• Basic $4000 + AWS + VB + Medical benefits
• 5 Days : 8.30am-5.30pm
• Working Location @ West
• AL 14 Days, Birthday Leave, Annual health check-up, Customized Gift for holiday season
• Required to attend a 2-week training session in Shanghai HQ
• New Headcounts

Responsibilities

• Assembly, testing, and maintenance of mechanical, electronic, or automated equipment.
• Adhere to operational protocols to ensure quality control and proper functionality of equipment.
• Collaborate with engineers to diagnose malfunctions and enhance system performance.
• Assist in documenting testing procedures and results.
• Maintain a safe and organized work environment, complying with workplace safety standards.
• Conduct wafer testing on the wafer platform according to the schedule.
• Perform die testing on the die platform as scheduled.
• Execute die sorting on the sorting platform based on the timeline provided.
• Uphold and manage 6S standards within the Fab environment.

Requirements:

• Min 1 year relevant experience
• Proficiency in handling mechanical, electronic, or automated equipment.
• Singaporean only

For consideration, kindly submit your CV by clicking “APPLY Now” or email to [email protected]

**Only shortlisted candidate would be notified**

EA Reg. No: R1988238

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Descritption:

• After market sales related promotion to existing customers in Singapore
• Regular " patrol " activity as pro-active maintenance promotion.
• Patrol / Check machine condition / Report / Service proposal w quotation & manage prospectives / secure order / execute maitenance job by team
• Troubleshooting / proper report and action order to the team.
• Compressor system improvement proposals
• Energy saving proposal with existing system diagnosis

Job Requirement

• Minimum 3 year experience in aftersales service
• Experience in handling compressor/Valve/Pump
• Minimum diploma in Mechanical engineering

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Responsibilities:

• Design of hydraulic schematics
• Sourcing and sizing of components
• Modelling and drafting using CAD software
• Generate the EBOM and prepare design documents
• Integrate and testing of hydro-pneumatics system

Requirements:

• Keen interest in Mobile System Hydraulics and Pneumatics engineering and technology
• Must be competent with CAD Software such as Unigraphics and SolidWorks
• Knowledge in drafting, geometric dimensioning & tolerancing (GD&T) preferred
• Able to read and interpret fabrication/ mechanical/ assembly drawings
• Able to read and interpret electrical/ hydraulics/ pneumatic schematics
• Strong analytical skills is a plus
• Possessing a valid class 3 license is a plus
• Able to work independently and effectively with peers, resourceful and keen to learn
• Must be a team player with good communication skills
• Willing to perform hands-on work in the workshop/on the vehicle

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Summary:

We are seeking organised and technically skilled individual to serve as System Engineer. This role will be responsible for implementing, testing and integrating of system. The candidate should have strong technical background and ability to communicate effectively with technical and non-technical teams.

Job Responsibilities:

• Implement and integrate system to meet customer requirements

• To resolve issues on-site

• Perform system testing, integration, troubleshooting and validation.

• Prepare documentation for System Design Document, Installation Control Document, Acceptance Test Plan and User Manual to facilitate training and support.

Qualifications:

• Prior experiences in System Implementation of Radio Communication, Public Addressing System (PA), PABX, Charger System and Battery Monitoring System.

• Strong understanding of System Design

• Good analytical, problem-solving, communication, problem-solving skills and teamwork abilities.

• Prior working experience with MINDEF and/or MHA customer is an advantage

Key Competencies:

• Proficient in MS office and Visio

• Good problem-solving abilities and attention to detail

• Team player with pleasant personality

• Strong interpersonal skills

We are looking for an Assistant Principal Engineer to join our ILS O&S Team. In this position, you will be responsible for in-service vehicle matters, item obsolescence and vehicle upgrading proposal. You will work closely with the Design and O&S team as well as the End Users in order to maintain the availability of the in-service vehicles.

Job Responsibilities:

• Meet up of End Users to understand their issues and matters on hand.
• Work with different departments, local vendors, overseas OEMS to submit design/pricing proposal.
• Monitor progress of outstanding issues and/or submitted proposals.
• Monitor allocated budget for the given year.

Job Requirements

• Degree in Mechanical Engineering.
• Knowledge and/or experience in mechanical design. Proposal writing and budgeting experience will be an advantage
• Self-motivated and able to work systematically
• Team player with good communication and presentation skill
• Singaporeans only

As a technical support engineer, you’ll be part of a global team whose main focus is ensuring that Wise API integrations get an industry-leading level of assistance when they need it. You’ll work with Wise Platform enterprise partnerships and business payouts customers, Open Banking providers, and self-onboarded API users. They all depend on rapid and dedicated support: from general questions about the behaviour of an API or webhook, to acting as a first-responder for a major incident.

What you'll be doing:

• Develop a deep expertise in the Wise API products and capabilities, and solid understanding of how Wise Platform partnerships have integrated with the solution. You’ll collaborate with teams across the Wise Platform and Open Banking products to do that.

• Support the team to help contacts across all channels, primarily over email in our support queues, and also by phone in the case of critical issues for a partnership.

• Contribute significantly to troubleshooting and solving issues users report, both independently and collaboratively with engineering and commercial teams in Wise.

• Enable the rest of the team to support API users globally, by sharing and capturing knowledge and trends on the issues users are raising.

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

1. Preparing the project reports and guidelines as per the instructions of higher authorities.
2. Assisting senior engineers in conducting research, designing systems, and analyzing data of specific projects.
3. Identify the problems of execution of project and solve them using engineering principles.
4. Maintaining equipment and inventories of the organization.
5. Collaborating with co-workers to meet the goals of projects.
6. Ensure testing and quality control processes of the products.
7. Stay familiar with the advancement in technologies to develop the highly demandable skills.
8. Following safety guidelines and engineering parameters to executive the project tasks.
9. Participating in learning and development sessions to gain expertise.

Job Responsibilities:

1. Update CMS database checklists based on the latest engineering drawings and punch lists for mechanical/electrical processes, safety, and HVAC disciplines, and assign tasks accordingly.
2. Prepare boundary drawings to support subsystem listings.
3. Develop procedures, method statements, and risk assessments for commissioning activities.
4. Attend supplier Factory Acceptance Tests (FAT) as required.
5. Lead a team of mechanical/electrical technicians and mechanics to perform on-site preparation and execution, liaising with all parties, including supplier representatives, to resolve issues promptly.
6. Be adaptable to overseas travel and prepare the required documentation.

Candidate Requirements:

1. Relate experience in commissioning within the oil & gas or marine industry required.
2. Hands-on experience in commissioning diesel generators, compressors, pumps, piping systems, packaged equipment, cranes, mechanical handling equipment, HVAC, etc.
3. Familiar with work permit systems, lock-out tag-out (LOTO) procedures, and project specifications, technical, and HSE standards.
4. Experience with completion management system databases such as PIMS-CMS, WinPCS, ProCoSys, or ICAPS is a plus.

Benefits:

1. Annual Leave: 7 days in the first year, increases by 1 day annually, up to 14 days.
2. Medical Leave: 14 days per year.
3. Bonus: Based on performance.
4. Transportation provided (shuttle service available). Accommodation is located in Singapore.

Key Responsibilities:

• Install GT Power & Distribution Transformers, HT & LV Switchgear, and substation equipment.
• Oversee material planning, cable tray/support installation, and project coordination.
• Lead testing & commissioning of electrical systems.
• Perform quantity surveying and ensure quality assurance/control.
• Manage electrical project timelines and budgets.
• Coordinate with other service providers to ensure smooth site installations

Requirements:

• Minimum 7 years experience in electrical engineering, ideally in the semiconductor industry.
• Proven expertise in electrical system installation and project management.
• Strong skills in material planning, quantity surveying, and quality control.
• Bachelor's degree in Electrical Engineering or related field.

Job Summary:

We are seeking a highly skilled Marine Structural Analysis Engineer to join our team. The successful candidate will be responsible for performing detailed structural analyses and design evaluations for various marine structures, ensuring safety, reliability, and compliance with industry standards and regulations.

Key Responsibilities:

• Perform structural analysis and design of marine structures including ships, offshore platforms, and subsea installations.
• Utilize advanced finite element analysis (FEA) tools and software to conduct stress, fatigue, and dynamic analyses.
• Develop and validate structural models to simulate and predict performance under various loading conditions.
• Collaborate with multidisciplinary teams to integrate structural analysis results into overall project designs.
• Prepare detailed technical reports, design documentation, and presentations for stakeholders.
• Ensure compliance with relevant industry codes, standards, and regulatory requirements.
• Participate in design reviews, risk assessments, and failure mode analysis.
• Provide technical support during the construction, installation, and operational phases of projects.
• Stay updated with the latest advancements in marine structural engineering and analysis methodologies.

Qualifications:

• Bachelor’s or Master’s degree in Civil Engineering, Structural Engineering, Naval Architecture, or a related field.
• Proven experience in structural analysis and design of marine structures.
• Proficiency in using FEA software such as ANSYS, ABAQUS, or equivalent.
• Strong understanding of marine structural codes and standards (e.g., DNV GL, ABS, ISO).
• Excellent analytical, problem-solving, and decision-making skills.
• Strong communication skills, both written and verbal, with the ability to present complex technical information clearly.
• Ability to work effectively in a team environment and manage multiple projects simultaneously.
• Professional Engineer (PE) license or Chartered Engineer (CEng) status is preferred but not required.

Preferred Skills:

• Experience with structural analysis of offshore wind turbines, oil & gas platforms, and subsea structures and marine vessels.
• Familiarity with software tools such as MATLAB, Python, or other programming languages for custom analysis and automation.
• Knowledge of marine construction techniques and materials.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and career advancement.
• A dynamic and collaborative work environment.
• The chance to work on innovative and challenging projects in the marine industry.

Responsibilities:

Prepare Electrical and Instrumentation design documents including:

• Lighting design and calculation.
• Preparation of lighting layout 2D and 3D drawings, Lighting circuit diagram.
• Earthing and Lightning Protection design and drafting of layout, section, and elevation drawings.
• Cable ladder, conduit, trunking, cable routing design. Preparation of 2D and 3D design drawings.
• Cable sizing calculation, prepare Electrical cable schedule
• Prepare material take off (MTO) for material purchase.
• Fire Alarm, CCTV, Card Access, Public Addressing system design, preparation of system schematic and Layout drawings 2D and 3D.
• Preparation of Instrument Location layout drawing
• Preparation of Junction box termination drawings, Instrument Loop diagram
• Preparation of instrument Hook up, typical installation details
• Preparation of instrument cable schedule

Design coordination with internal design disciplines such as Structure, mechanical, piping team for design interface issue

Attend 3D model review and coordination with internal discipline engineers to resolves clashes.

Attend site survey and provide design sketches such as cable routing, support installation details, etc.

Support project tender team for material take-off from client tender documents.

Attend factory inspection for E&I related material such as Fire alarm, CCTV, MCC, PLC system

Support construction site to raise material purchase request, evaluation vendor quotation, preparation of Material approval submission.

Support site testing & commissioning work such as fire alarm system, CCTV System, DCS loop check, etc.

Requirements:

• Minimum Diploma in Electrical or Electronics Engineering.
• 3~5 Year of relevant design experiences
• Fresh graduates are welcome to apply
• Minimum hands-on experience for using design software such as AutoCAD MEP (Electrical), AutoCAD Plant 3D, Navisworks Manage, DIALux.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructure, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We are seeking an experienced and highly motivated Embedded Engineer to join our dynamic engineering team. The ideal candidate will be responsible for designing, developing, testing, and maintaining embedded systems for a variety of applications. You will work closely with hardware and software teams to integrate solutions that meet our customer’s needs while ensuring high quality, reliability, and performance.

Job Description

• Design and develop embedded systems and applications based on customer requirements and project specifications.
• Write efficient, optimized code for embedded systems in languages such as C/C++ or assembly.
• Develop, implement, and test embedded software on various platforms (e.g., ARM, or microcontrollers).
• Debug and troubleshoot embedded systems using tools like oscilloscopes, logic analyzers, and in-circuit debuggers.
• Conduct system performance analysis and implement software optimizations to meet power, speed, and resource constraints.
• Create unit tests and integrate automated testing into development processes.
• Document and maintain clear code, designs, and specifications for embedded systems.
• Collaborate with cross-functional teams, including hardware engineers, software developers, and QA engineers, to deliver high-quality embedded products.
• Participate in code reviews, maintain version control using Git, and follow industry best practices for embedded development.
• Stay up to date with emerging embedded technologies and continuously improve the design and development process.

Requirements

• Experience in firmware development on embedded systems using C/C++ and/or assembly
• Knowledge and/or experience in embedded system such as Arm-Linux
• Knowledge and/or experience in porting codes (especially assembly language) from Intel-Linux to Arm-Linux
• Knowledge in information security or networking standards is an added advantage.
• Knowledge in secure boot for NXP i.MX solution is an added advantage.
• Strong problem-solving skills and ability to work independently as well as teams.
• Excellent communication and collaboration skills.
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

• Servicing experience on Marine and Offshore deck equipment.
• Intensive knowledge on hydraulic system troubleshooting.
• Hydraulic system modification.
• Knowledge on Low pressure system service and troubleshooting.
• Min knowledge on electical control system and fault finding.
• Service / Troublshoot / Repairing knowledge on marine and offshore cranes and winches.
• Communication / Report writting skills.
• Overseas travel on short notice.
• Attending ship repair meeting / apply permit / Preparation of shipyard entery documents.
• As a team leader.
• Participate in vessel dockings repair work at shipyards.
• Adhoc duties as assigned

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

Job duties and responsibilities:

• Design new products and continually improve existing products to meet industry standards and customer requirements.
• Develop technical manuals and Instruction Operating Manuals for products, ensuring accuracy and usability.
• Prepare, review, and verify design drawings, detailed specifications, and fabricated drawings for compliance with technical standards.
• Create Bills of Materials (BOMs) and ensure accurate documentation.
• Order materials and supplies; monitor the progress of fabrication and installation to ensure alignment with design specifications and schedules.
• Perform quality control checks to ensure the integrity of materials, components, and final products.
• Update and maintain design records, project databases, and documentation for traceability and reference.
• Track and coordinate the delivery of goods and materials to meet project timelines.
• Collaborate with cross-functional teams, including procurement, production, and project management, to address technical challenges.
• Provide technical support and guidance to the fabrication and installation teams during project execution.
• Identify opportunities for cost optimization, design innovation, and process improvement.

Job Requirements:

• Degree or Diploma in Mechanical, Precision, Tool, and Die Engineering, or a related field.
• At least 2 years of experience as a Design Engineer.
• Proficiency in drafting software such as AutoCAD, SolidWorks, 3D modeling software, or equivalent.
• Experience in Marine Hydraulic Applications, with knowledge of valves and actuators, as well as gear design (e.g., spur gear, planetary gear, bevel gear).
• Understanding of forging, casting, and precision CNC machining processes.

Job Summary:

• Seeking a Senior Marine Engineer with 8-15 years in marine engineering and automation.
• Expertise required in electrical control systems, automation design, and vessel performance optimization.
• Responsibilities include project management, technical troubleshooting, and cross-functional collaboration to meet timelines and project scope.

Key Responsibilities:

• Lead installation, testing, and commissioning of marine automation and electrical control systems.
• Design and optimize electrical schematics, PLC/HMI programming, and control panel design using AutoCAD.
• Oversee vessel performance monitoring and implement operational efficiency strategies.
• Conduct inspections, case studies, and system testing for data accuracy and system functionality.
• Ensure compliance with IMO, SOLAS, and STCW safety protocols.
• Liaise with clients and stakeholders for smooth project execution and issue resolution.
• Prepare and present progress reports documenting each project phase.
• Supervise technical teams, troubleshoot electrical systems, and ensure minimal downtime.
• Manage project documentation including schematics, termination drawings, and progress reports.
• Monitor compliance with industry standards, safety, and regulatory requirements.

Qualifications:

• Degree/Diploma in Marine Engineering or a related field.
• Certifications in AutoCAD, Industrial Automation, CompEx
• Proficiency in AutoCAD, Electrical CAD, PLC programming, and industrial communication protocols (e.g., Modbus, Ethernet).
• Strong project management skills and ability to manage multiple projects.
• Familiarity with MS Projects, CRM systems, and Gantt charts preferred.

Skills & Competencies:

• Marine Engineering & Automation: Expertise in shipboard automation, electrical systems design, and vessel performance optimization.
• Project Management: Proficient in planning, executing, and closing projects; skilled with project management tools.
• Technical Leadership: Capable of leading technical teams and stakeholders to meet timelines and budget.
• Data Acquisition & System Integration: Experienced in optimizing data acquisition and integrating control systems.
• Safety Compliance: Knowledge of maritime safety standards and regulatory compliance.
• Problem-Solving: Effective in troubleshooting and resolving complex technical issues

About Us:
Surbana Jurong Aviation is a premier aviation consultancy firm known for its expertise in aviation-built environment consulting services. With a dedicated team of professionals, we deliver high-quality aviation buildings, facilities, and infrastructure for clients worldwide. We seek a Junior Aviation Engineer/Planner to join our dynamic team.

Job Summary:
As a Junior Aviation Engineer/Planner, you will be vital in designing airport-related buildings, facilities, and infrastructure. The ideal candidate will have a background in civil engineering, proficiency with BIM, AutoCAD, and AviPLAN, and can create precise technical drawings for airside infrastructure and engineering works in airports.

Key Responsibilities:

• Develop and update drawings using AutoCAD.
• Design airfield geometry and markings using AviPLAN.
• Collaborate with planners, engineers, architects, and other professionals to ensure designs meet all project requirements.
• Prepare technical drawings, sketches, diagrams, and specifications.

Qualifications:

• Diploma or bachelor’s degree in civil engineering or related field, or equivalent experience in C&S CAD/BIM design and drawing production.
• Proficiency in AutoCAD; experience with Civil 3D, Revit and AviPLAN is a plus.
• Strong understanding of civil engineering principles, construction methods, and materials.
• Exceptional attention to detail and accuracy in design work.
• Ability to read and interpret technical drawings and specifications.
• Strong organizational skills, with the ability to handle multiple projects simultaneously.
• Excellent problem-solving, analytical, and communication skills.
• Team-oriented with a strong ability to work independently.
• Willingness to travel as required.