Job Description:

- Assist HOD and supervise a team of technicians in delivering technical advices/ support to the various business units

- Actively involved in job estimation and WIP (Work-In-Progress) tracking

- Read Manual and Engineering Drawing for any re-engineering work required

- Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems

- Manage and supervise the MRO tasks allocated to the section in supporting commercial products, company's proprietary and non-proprietary Army products

- Deliver allocated and ad-hoc tasks within stipulated timeline and cost

- Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost

- Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches, studies and make necessary recommendations

- Submit investigation reports to relevant authority for approval

- Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained

- Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components

- Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible

- Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts

- Perform other related duties as assigned

Job Requirements:

- Degree in Mechanical/Mechatronic Engineering

- Experience in Component MRO in related industries

- Experience in effectively leading a team of Technicians

- Experience in SAP System is advantageous

- Knowledge in Army systems will be an added advantage

- Ability to read and interpret schematics and datasheets

- Strong technical skills in troubleshooting Engine, Transmission or Gearboxes

- Competent in Mechanical/Mechatronic system

- Familiar with components testing

- Ability to read and interpret Engineering Drawing and datasheets

- Good communication skills and a strong team player

- Able to work under pressure and tight timeline

- Good analytical and problem-solving skill

JOB DESCRIPTION

* Design and develop Mechanical Equipment/Systems, keeping in mind budget, timelines and other essential resources.

* Work with a team of Engineers in the creation of new product designs, ensuring alignment with project objectives and timelines.

* Utilized CAD Software to create 3D Models and details drawings for new product development.

* Implemented design modifications and optimizations to streamlne the assembly process.

* Collaborate with cross functional teams including product management, manufacturing and quality assurance to ensure successful product development and launch.

* Troubleshoot problems and devise solutions to resolve them.

* Research and keep up with the Dynamic Technology and trends in the mechanical design spectrum.

REQUIREMENTS

* Degree in Mechanical Engineering.

* Knowledge in dealing with Engineering Drawings and 3D Modelling.

* Experience working with designing software - Solidworks and Autocad.

* Minimum 5 years of relevant working experience as Mechanical Design Engineer.

* Able to work independently with minimal supervision.

* Strong verbal, written and communicatin skills.

* Sound knowledge of Computer Application and Microsoft Office.

* Willing to work on weekends and travel occassionally if required.

Job Title

Engineer

Occupation

ENGINEER

Job Description & Requirements

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum one of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Desired Quality:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter

- Willing to learn

1. JOB SUMMARY

To oversee tasks delegated by the Project team management to ensure the project is progressing on time and on budget. To collaborate with the whole project team, contributing to the entire project lifecycle.

2. KEY RESPONSIBILITIES

• Work collaboratively with the project manager and team to drive new projects to maturity
• Completes engineering projects by organizing and controlling project elements.
• Develops project objectives by reviewing project proposals and plans
• Determines project responsibilities by identifying and assigning personnel to project phases and elements
• Assist commerical/BD team with cost estimates.
• Determines project schedule by studying project plan and specifications, calculating time requirements, and sequencing project elements.
• Maintains project schedule by monitoring project progress, coordinating activities, and resolving problems.
• Process transactions for production related data
• Controls project costs by approving expenditures

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 1 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job details

Salary

$3,000 a month

Job type

Full-time

Responsibilities: -

• Provide technical support to Operating Plants for safe & smooth plant operations
• In charge of daily chemical & mechanical processes.
• Initiate and implement plans for performance improvement and economic / capacity optimization
• Perform plant simulation to identify high return opportunities to business team
• Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety / quality, reduce energy consumption, improve production capacity / productivity, and reduce costs.
• Implement Process Improvement idea via Management of Change system and/or Non-regular work system.
• Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk that may leads to Plant instability, Safety or Quality issues.
• Troubleshoot plant trouble related to process, perform root cause analysis and propose corrective and preventive measures as process engineering function and/or based on request basis.
• To in charge of equipment calibrations.
• To update production output regularly.
• All other ad-hoc duties as assigned

Requirements: -

• Min Diploma or with min 3 years relevant working experience can be considered as well.
• Competency in Microsoft applications including Word, Excel and Outlook.
• Able to liaise with English and Mandarin speaking customers
• 5.5-days work week.
• Location: Tuas South
• Able to start work immediately
• PR/Singaporean

Please note that only shortlisted candidates will be notified.

• Facilitates planning and development ofquality control systems for specifiedproducts or processes.
• Collaborates with teams of engineers andproduct specialists to ensure customer anddivision quality requirements are met.
• Identifies the root cause of qualityproblems, and coordinates modificationsor other corrective actions.
• Liaising of Calibration Program.
• Periodically inspect instrument accordingto the specified schedule date
• Reviews design, manufacturing, and testingdocumentation.
• Update our Quality Management system(QMS) with incidents, fixes andimprovement.
• Offers technical guidance and support inresponse to quality testing and analysis.
• Ensures contract compliance by reviewingand approving quality requirements forsupplier purchase orders, manufacturing,and other related services.
• Performs other duties as assigned.

Responsibilities:

• Understand Contract Specification.
• Understand Marine Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and Piping routines.
• Good knowledge in preparing Technical specification and Material take off (MTO).
• Review and comments technical proposal from vendor.
• Technical Bid Evaluation for procurement.
• Monitor procurement process to meet Project Schedule.
• Review vendor certified Document (VCD).
• Monitor piping bulk material usage, surplus material and warehouse balance utilisation.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Attend factory acceptance test (FAT) if required.
• Able to perform piping procurement related activities with no or minimum supervision.

Requirements

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies.

By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Roles & Responsibilities

* Project management, system testing, technical analysis

* Providing engineering design support

* technical documentation

* Performing analysis and diagnostics for battery energy storage systems

* Managing battery energy storage systems

Job highlights

4 off days monthly, rest days depend on schedule

Competitive salary 3k and above

Positive and nurturing working environment

Work location: co location

Duration: permanent

Requirements

Qualifications - diploma or high school diploma above

Work experience- at least two year working experience in related fields

Job type- full time

Required languages: English and able to communicate with mandarin speaking customers

Job specialisation- services,engineering

If you have an interest in applying for this role, please WhatsApp me at 98198786 to apply. Only shortlisted candidates will be notified. Priority will be given to Singaporeans

Young hon Lim/ manager

Render private limited

EA licence no 15c7827

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications.
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Electrical or Electro-mechanical engineering, preferably with a focus on motion systems
• At least 7 years of relevant working experience (semicon or similar)
• Knowledge of electric design principles of cabling, connectors, safety systems, electronic racks, PCB design
• User of 3D design tools and schematic drawing tools (e.g. NX, SolidWorks, E-Plan)
• Basic programming skills and ability to debug electrical systems
• Understanding of motion control systems
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing interdependency between electrical, electromechanical and mechanical (sub)systems
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

Job Description:

• Day-to-day customer service and procurement activities - Responsible for managing daily customer service operations and manage entire supply chain process from procurement to distribution to ensure timely and cost-effective delivery of products.
• Demand planning - Work closely with sales and marketing teams to forecast demand accurately.
• Production Planning - Collaborate with Operations team to develop production schedules and optimize the production planning that align with demand forecasts.
• Inventory Management - Work within the team to implement robust inventory control measures to maintain optimal stock levels. Monitor and analyze inventory turnover, taking proactive measures to prevent shortages or overstock situations.
• Logistics Coordination - Coordinate logistics activities, including transportation, shipping, and customs clearance. Optimize transportation routes and methods to reduce costs and enhance efficiency.
• Relationship Management - Build and maintain strong relationships with local and overseas suppliers and customers. Develop good vendor management with warehouse personnel for effective inventory control.
• Licensing - Manage all license requirements for Import/Export & transportation with compliance to Government Authority of Singapore.
• Collaboration and Communication - Work with product management team to review product specification/technical data. Collaborate with quality control teams to ensure that all products meet industry standards and customer specifications.
• Perform any other ad hoc tasks assigned by Team leader / Management.

Job Requirements:

• Degree in Chemistry / Chemical Engineering or any Engineering field.
• Minimum of 2 Years of working experience in a related field.
• Preferably with related experience in Chemical Distribution/ Semiconductor industries.
• Excellent written and spoken communication skills in English and ideally proficient in Chinese (in order to negotiate and handle queries with overseas Mandarin speaking suppliers/vendors in regards with the import & export shipment arrangement matters).
• Hands on experience using SAP/Navision system, strong in Microsoft Office, especially Excel would be an advantage.
• Experience in ISO9001, ISO14001 and ISO 45001.
• Ability to prioritize workload, make systematic decisions under pressure.
• Possess an entrepreneurial ‘can do’ mindset, able to work in a start-up environment.
• Possess excellent interpersonal skills, strong problem-solving skills and sense of ownership.
• Willing to travel if required.

Job Description:

• Perform preventive maintenance of production equipment.
• To report in writing for maintenance carry out.
• Provide support for network, security, server, UPS and mission critical systems.
• Perform other job responsibilities as and when assigned.

Requirements:

• Minimally 1-2 years of experience in supporting network, security, server, UPS and mission critical systems with a stringent SLA of 99.9%.
• Customer orientated with high level of service attitude.
• Good listening and analytical skills.
• Hardworking, outgoing and enthusiastic.
• Positive working attitude.
• Team player and also able to work independently with little supervision.
• Able to thrive in a dynamic environment.
• Able to understand the system and architecture diagrams.
• Able to understand the user operation environment.
• Willingness to pick up new technologies.
• Flexible to work in rotational shifts.

Interested candidates, do send your resume to [email protected]. ONLY shortlisted candidates will be notified through email for an interview.

*Position Overview:*

We are seeking a skilled and experienced Marine NavCom Service Engineer to join our team. The ideal candidate will have at least 4 years of hands-on experience in the installation, troubleshooting, and servicing of a wide range of marine navigation and communication systems, including but not limited to MARINE RADAR systems, chartplotters, ECDIS, AIS, VDR, VHF radios, MF/HF SSB, autopilots, and maritime IT equipment. Additionally, knowledge in IT/networking and VSAT systems is essential for this role. A General Operator's Certificate (GOC) is recommended. The candidate should also possess a general understanding of marine electrical and electronics systems. Flexibility and a willingness to travel are required for this position.

*Key Responsibilities:*

Install, troubleshoot, and service various marine navigation and communication systems including MARINE RADAR systems, chartplotters, ECDIS, AIS, VDR, VHF radios, MF/HF SSB, autopilots, maritime IT equipment, and VSAT systems.
Conduct regular maintenance checks and inspections on installed systems to ensure optimal performance and compliance with safety regulations.
Diagnose and resolve technical issues efficiently to minimize downtime and ensure the continuous operation of onboard systems.
Provide technical support and guidance to onboard crew members regarding the operation and maintenance of navigation and communication systems.
Collaborate with internal teams and external stakeholders to coordinate installations, upgrades, and repairs as needed.
Keep abreast of industry developments, regulations, and technological advancements in marine navigation and communication systems.
Document all service activities, including installation procedures, troubleshooting steps, and solutions provided, accurately and comprehensively.
Qualifications and Experience:

Bachelor's degree or equivalent in Electrical/Electronics Engineering, Telecommunications, or a related field.
Minimum of 4 years of hands-on experience in the installation, troubleshooting, and servicing of marine navigation and communication systems.
Proficiency in the installation, configuration, and maintenance of MARINE RADAR systems, chartplotters, ECDIS, AIS, VDR, VHF radios, MF/HF SSB, autopilots, maritime IT equipment, and VSAT systems.
Strong knowledge of IT/networking principles and protocols.
General Operator's Certificate (GOC) is recommended.
Familiarity with marine electrical and electronics systems is desirable.
Excellent problem-solving skills and the ability to work efficiently under pressure.
Effective communication and interpersonal skills.
Flexibility and willingness to travel frequently, including assignments at sea or in remote locations.
Commitment to maintaining high standards of safety and compliance with regulatory requirements.
If you meet the above qualifications and are looking to join a dynamic team in the maritime industry, we encourage you to apply for this exciting opportunity.

Job Summary:

We are seeking a highly skilled Marine Structural Analysis Engineer to join our team. The successful candidate will be responsible for performing detailed structural analyses and design evaluations for various marine structures, ensuring safety, reliability, and compliance with industry standards and regulations.

Key Responsibilities:

• Perform structural analysis and design of marine structures including ships, offshore platforms, and subsea installations.
• Utilize advanced finite element analysis (FEA) tools and software to conduct stress, fatigue, and dynamic analyses.
• Develop and validate structural models to simulate and predict performance under various loading conditions.
• Collaborate with multidisciplinary teams to integrate structural analysis results into overall project designs.
• Prepare detailed technical reports, design documentation, and presentations for stakeholders.
• Ensure compliance with relevant industry codes, standards, and regulatory requirements.
• Participate in design reviews, risk assessments, and failure mode analysis.
• Provide technical support during the construction, installation, and operational phases of projects.
• Stay updated with the latest advancements in marine structural engineering and analysis methodologies.

Qualifications:

• Bachelor’s or Master’s degree in Civil Engineering, Structural Engineering, Naval Architecture, or a related field.
• Proven experience in structural analysis and design of marine structures.
• Proficiency in using FEA software such as ANSYS, ABAQUS, or equivalent.
• Strong understanding of marine structural codes and standards (e.g., DNV GL, ABS, ISO).
• Excellent analytical, problem-solving, and decision-making skills.
• Strong communication skills, both written and verbal, with the ability to present complex technical information clearly.
• Ability to work effectively in a team environment and manage multiple projects simultaneously.
• Professional Engineer (PE) license or Chartered Engineer (CEng) status is preferred but not required.

Preferred Skills:

• Experience with structural analysis of offshore wind turbines, oil & gas platforms, and subsea structures and marine vessels.
• Familiarity with software tools such as MATLAB, Python, or other programming languages for custom analysis and automation.
• Knowledge of marine construction techniques and materials.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and career advancement.
• A dynamic and collaborative work environment.
• The chance to work on innovative and challenging projects in the marine industry.

Job Summary: We are seeking an experienced and detail-oriented Network Security Engineer to join our team. The ideal candidate will have hands-on experience in managing and configuring Cisco wireless infrastructure, switches, and routers, as well as proficiency with Palo Alto and Checkpoint Firewalls.

Key Responsibilities:

• Cisco Wireless Infrastructure Management:

o Configure, deploy, and manage Cisco wireless access points and controllers to ensure reliable wireless network connectivity.

o Troubleshoot and resolve issues related to wireless network performance, coverage, and security.

o Managing the Cisco ISE.

• Cisco Switches and Routers Management:

o Install, configure, and maintain Cisco switches and routers for optimal network performance.

o Perform network troubleshooting, identify bottlenecks, and implement solutions to ensure network reliability.

• Firmware Upgrades:

o Upgrade firmware for wireless devices, routers, and switches as part of regular network maintenance and improvement.

o Ensure minimal disruption during firmware updates and troubleshooting any issues that arise.

• Network Monitoring with SolarWinds:

o Utilize SolarWinds for continuous monitoring of the network infrastructure, including switches, routers, and wireless systems.

o Respond to alerts, troubleshoot network issues, and optimize network performance based on monitoring data.

• Firewall Management (Palo Alto, Checkpoint):

o Configure and maintain Palo Alto and Checkpoint firewalls to ensure network security and integrity

o Monitor firewall performance, implement policy changes, and respond to any security incidents or alerts.

Required Skills and Qualifications:

• Proven experience in managing and configuring Cisco wireless infrastructure, switches, and routers.

• Strong knowledge and hands-on experience with SolarWinds network monitoring tool.

• Proficiency in managing Palo Alto and Checkpoint firewalls.

• Strong troubleshooting skills for network and security-related issues.

• Ability to perform firmware upgrades for network devices and equipment.

• Familiarity with network security practices and protocols.

• CCNP (Cisco Certified Network Associate) certification or equivalent is a plus.

• Experience with network documentation and creating network diagrams.

Preferred Skills:

• Advanced Cisco certifications (CCNP) or equivalent.

• Knowledge of other network security platforms.

• Experience in implementing network automation or orchestration tools.

Responsibilities:

• Prepares key project documentation in executing the complete Telecom and Navigation engineering scope of work as per the project requirements in meeting customer’s expectations
• Prepares telecom system concepts, schedule of deliverables and plan activities in line with overall project schedule, delegate the tasks to telecom team member assigned to the project and monitor the progress
• Leads telecom teams to prepare documents, such as design philosophies, block diagrams, room layout and deck arrangement, cable schedules and etc
• Leads telecom teams to perform system design verification, such as PAGA sound coverage, PAGA voltage drop calculation, Link budget, system redundancy cabling etc. Coordinates with other engineering team members (i.e.yard engineering, basic design and etc.), subcontractors and consultants on technical issues and design solutions in meeting project deliverables
• Leads telecom team to prepare procurement engineering documents, such as technical specifications, equipment data sheets, MTO, technical bid evaluation etc
• Participates in project meeting/technical meeting/3D model review/Workshop, attends to basic technical queries and issues related to Telecom and Navigation system design and reviews the deliverables (i.e.VCD, third party study report, workshop report etc)
• Participates and support for Digital Security review regarding the network design and security implementation
• Liaises with owners, statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Works with Procurement and project team to source for Telecom & Navigation vendors or Telecom System Integrator in complying with the project technical requirement specifications in meeting project deliverables
• Prepares engineering deliverable such as interconnection diagram, termination diagram, room & equipment layout in compliance with requirements of contract, classifications and regulations and coordinate with various disciplines for material handling, working environment requirement, constructability and installations, operations and maintenance, and safety etc
• Provides solutions to commercial, production and project team members on all aspects of Telecom engineering to support new-built’s/conversion fabrication, installation, testing and commissioning activities
• Performs technical studies and site survey in cooperation with production team members and Telecom & Navigation vendors or Telecom System Integrator for conversion project and/or repair & life extension project
• Performs any other duties as assigned by superior(s) from time to time

Requirements:

• Bachelor’s degree in Electrical and Electronics Engineering, Telecommunication Engineering or related engineering disciplines
• 3 years of working experience in planning, designing and construction of Telecom and Navigation system in the oil and gas industry
• Experience in telecom and navigation system design in Pre-FEED, FEED, EPCC, Conversion and Repair & Life Extension.
• Familiarity with USCG and BSEE requirements will be an additional advantages
• Excellent proficiency in English (written and spoken)

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

Geotechnical:

- Experienced in the design and design management of major earth retaining and stabilizing structures, deep foundations, reclamations, ground improvements, slope stabilities.

- Familiar with the preparation of Geotechnical Interpretative Reports.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

Purpose: Responsible for the complete end-to-end planning, direction, and coordination of all the manufacturing processes related to system integration for a specific project. Together with the program team, the Manufacturing Engineer is to ensure that assembly can meet costs, quality, and delivery requirements.

Key Area of Responsibilities:

• Design of production layout to enable production to fulfill build plan forecast or pre-defined production run rate.
• Define requirements for assembly tools and equipment to support product realization and build plan.
• Participate actively in PQP to ensure that risks are identified, and preventive actions defined and implemented.
• Implement a certification program for assembly to ensure that assembly module leads are trained and certified to carry out specific assembly tasks.
• Collaborate with the Process Engineer in the design of the assembly Kit Kart for issue of materials into the clean room and effective handling of materials inside the production area.
• Lead in resolving technical problems faced by Assembly, and resolve internal and customer quality complaints.
• Monitor assembly capacity of the program, and perform ramp assessment when required, to fulfill build plan system delivery.
• Contribute to the system build progress meetings together with the program team to meet on-time delivery targets.
• Evaluate assembly efficiency and implement improvements to achieve the calculated standard time.
• Monitor all customer's consigned equipment to ensure all are inventoried, calibrated, and maintained regularly.
• Identify and implement improvements to shorten production cycle time, improve overall production efficiency, improve quality performance, enhance safety or to boost sustainability.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering)
• At least 3 year of experience as an engineer in the manufacturing assembly environment.
• Strategic, creative, and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

We are seeking a highly skilled and innovative Executive Engineer, Mechanical to join our dynamic team in Singapore, Singapore. In this role, you will be responsible for designing and implementing cutting-edge mechanical engineering solutions for various building and infrastructure projects.

• Design and perform calculations for mechanical engineering works, including ACMV, fire protection systems, plumbing, and sanitary systems
• Conduct technical feasibility studies, life cycle analyses, and planning for building engineering projects
• Develop comprehensive study reports, design reports, and technical specifications for mechanical engineering projects
• Prepare detailed tender documents and evaluate proposals, providing thorough assessment reports
• Collaborate with cross-functional teams to ensure project goals are met efficiently and effectively
• Provide support in project management and contract administration for building engineering contracts
• Implement innovative mechanical engineering solutions while staying up-to-date with industry trends
• Troubleshoot and resolve complex mechanical engineering issues as they arise
• Mentor junior engineers and contribute to the overall growth of the engineering team
• Ensure compliance with industry standards and regulations in all project phases

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.