Job Description:

• Overseeing projects at one or multiple stipulated sites.

• Assist project manager is the execution of the projects.

• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.

• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.

• Monitor and ensure progress of works are carried out according to project specification.

• Assist drafting team for design schematic drawing, layout drawing, P&ID drawing.

• Review and check drawing before submit to main contractor.

• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.

• Support project manager in the administration of contract, claim, variation and any dispute arise.

• Raise MR and order material & arrange manpower for necessary works.

• Advise site team for work schedule and technical issues.

• Make sure project is carried out according to schedule.

• Responsible for site supervision and implementation.

• Responsible for ensuring implementing safety measures.

Requirements:

- Minimum diploma

- 3 years or above experiences in ACMV, especially in air-conditioning industry

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities

• Prepares and reviews key project documentation in executing the complete Subsea/Riser interface engineering scope of work as per the project requirements in meeting customer’s expectations
• Prepares and reviews project requirement specification, layout and interface drawings, design studies and other engineering deliverables using engineering common network, software and tools
• Coordinates with other engineering team members (i.e. Yard engineering, basic design and etc.), Equipment designers and Client’s SURF contractors on technical issues and design solutions in meeting project deliverables
• Participates in project meeting, attends to basic technical queries and issues related to subsea/riser interfaces, reviews and be responsible for Riser interface equipment designer deliverables
• Liaises with owners, Equipment designers, SURF contractors, , statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Generates and reviews the reports on work progress for submission to owners, statutory and classification authorities for approval and maintains project database for future references
• Preparation of technical specification (TS) for complex riser related packages.
• Technical bid evaluation (TBE) of vendor proposals to aid selection of most suitable proposal for the project.
• Reviews Vendor deliverables
• Manages & Liaises with the selected vendor to deliver the package meeting all the project requirements in a safe and cost-effective manner meeting the schedule.
• Provides engineering inputs to commercial, production and project team members on all aspects to procurement, fabrication, installation, testing and commissioning activities

Requirements

• Bachelor's Degree in Mechanical/ Offshore and Marine Engineering or equivalent
• 5 years of experience in Procurement, Planning, Designing, Integration of Subsea/Riser interface design in the oil & gas industry
• Experienced in engineering pre-commissioning and commissioning activities in package
• Possesses good interpersonal skills
• Good problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Description

• Perform troubleshooting, service & calibration work both at site & in-house
• Performs periodic, predict, preventative, repair and maintenance services for Company’s equipment and associated controls
• Overhaul, install, calibrate control valves and field instruments
• Supervising & managing of Sub-contractor to carry maintenance & servicing works
• Record servicing & maintenance data and generate service report

Requirements :

• Possess NITEC/Higher NITEC/Diploma in Mechanical / Mechatronics Engineering
• Communicate effectively, Customer orientation, Flexibility and self learning
• Can do attitude, Teamwork
• Energetic and good interpersonal skills
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

• 5 Days work week
• 9am to 6pm
• Walking Distance from MRT

Responsibilities:

• Oversee drawing management and control of technical documentation
• Assist project manager in planning and execution of project plans at site
• To understand and design electrical drawing and single line drawings
• Carrying out tests and inspections of Electrical/ Hydraulic Control Panel installations and equipment
• Planning routine Preventive Maintenance Activities and assisting the maintenance team
• Developing and implementing preventative maintenance procedures
• Preparing service & Site Progress Reports

Requirements:

• Diploma in Engineering or equivalent
• Min 2 years of working experience in construction industry
• Knowledge in PLC and WSH

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

**Only shortlisted candidate would be notified**

EA Reg. No: R1222284 | Kelvin Soh

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives. Our dedication to excellence and our strong track record have earned us a distinctive reputation for quality and trust as an integrated engineering group, spanning across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

Job Description:

• Responsible for the creation, organization, execution, completion, and maintenance of projects
• Manage scope and quality in alignment with stakeholders and manage risks and issues along the entire lifecycle and help the team remove blockers and solve problems
• Effectively communicate and manage stakeholder expectations and provide status information regularly
• Drive detailed technical discussions and manage the team to deliver a successful implementation
• Provide effective leadership to the team in solving problems, cultivate team cohesiveness & teamwork
• Manage projects that will involve development (hardware, firmware, software) and production
• Overseeing the entire project so that all required documentation is complete

Job Requirements:

• Possess more than 5 years of project management experience
• Experience in product development and/or software development
• Familiar with network infrastructure
• Strong management skills, including coaching, team-building, and conflict resolution
• Excellent interpersonal and communication skills
• Results-oriented mindset to achieve and exceed project goals.
• Project management certification like PMP or equivalent
• ITIL and CISSP is an added advantage
• Passion to learn and able to follow processes
• Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Description:

MAINTENANCE & ENGINEERING

• Plan and carry out preventive maintenance throughout the hotel to ensure standards are maintained for guest comfort.
• Prioritise and carry out maintenance as requested by Departments on a daily basis to ensure the smooth running of all hotel departments.
• Motivate and develop the Engineering team to reach to their fullest potential.
• Ensure guest-centric approach to works, schedules with priority placed on services which impact guest satisfaction.
• Liaise and work closely with the MCST and FCC to ensure smoother operations and consistency in approach.
• Record meter readings and liaise with the Executive Assistant Manager regarding options to improve energy management and conservation.
• As a Fire Safety Manager, be responsible for the testing of fire alarms, emergency lighting etc. on a routine basis as required by local Council and Fire Service.
• Liaise with the Body Corporate with regards to maintenance issues and re-charge labour and materials at agreed rates
• Ensure compliance with all legislation, including Health and Safety and Environmental.
• Liaise with the Executive Assistant Manager regarding use of contractors within the Hotel, controlling expenditure and ensuring work is to the standard required by the Company and manufacture specifications.
• Ensure the cost effective and hygienic removal of rubbish from the hotel areas and monitor to ensure areas are clear and free of offensive odour.
• Be available to carry out emergency maintenance work outside of normal working hours, as required for: full power failure, evacuation fire system re-set and / or failure of mechanical systems.
• Maintain records of repair work and daily checks as required by local Council, Government and Manufacturer specifications.
• Liaise closely with all departments regarding ‘down’ rooms to expedite a quick turn around and return to inventory.
• Ensure the external areas of the hotel are neat and tidy and maintained in line with Company brand standards.
• Research, recommend and liaise with the Executive Assistant Manager regarding procedures to improve the overall efficiency of the department and to carry out project work/prepare reports as requested by the Executive Assistant Manager.
• Support the co-ordination of safety and security/risk management programs via third party providers
• Work with the operational Department Heads team to ensure InterREACT tracking and compliance
• Ensure health, safety and welfare of all ambassadors is provided for through implementation of integrated occupational safety and health program.
• Give guidance to the effective operation of the WHS Committee.
• Ensure all ambassadors are competent in the safe and effective use of equipment and chemicals in accordance with the manufacturer’s instructions.
• Attend and actively participate in daily meetings respecting the confidentiality of issues which may be discussed formally or informally.
• Prepare monthly Engineering reports, commenting on key performance indicators and action taken to keep on target.
• Adherence to Emergency Communication procedures ensuring that enquiries from the media are only responded to by the nominated spokesperson.
• Strive to implement the AccorHotels Vision and demonstrate active use of AccorHotels Values.
• Any other reasonable request within your range of competence as required by Management.

We are now seeking Field Service Engineer to perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation. On a worldwide basis, our engineers represent the company while servicing, troubleshooting and supervising repair of NOV equipment. They shall be proficient to make necessary repairs and minor corrections to systems as required and provide a high level of customer service for product maintenance and in-field repair.

Responsibilities:

• Perform inspection, installation, commissioning, repair, upgrading, troubleshooting and related service work on offshore drilling platforms, land rigs, Shipyard or in workshops.
• Liaise with rig’s management during offshore assignment.
• Communicate with respective Managers for briefing and debriefing of service-related activities.
• Fill in necessary job reports, ISO work instructions and checklists required for all work in a timely manner.
• Interface with relevant departments to obtain a thorough understanding of NOV products and how they are safely operated, tested, calibrated and problems are resolved in a timely manner.
• Communicate field failures and feedback reports to the appropriate departments.
• Install, commission, troubleshoot, and repair NOV drilling equipment
• Provide training to other NOV personnel on the following systems and equipment as needed.
• > Analog and digital PLC based systems
• > Proprietary integrated control systems (Cyberbase, Amphion)
• > Variable Frequency Drives
• > Hydraulic/Pneumatic Systems
• > Electrical Systems (including various types of AC/DC motors)

Job Requirements/ Qualification:

• Bachelor's degree in related field or equivalent combination of education and experience.
• 5+ years’ experience in a related field is most welcome.
• Travelling on short notice is required. approximately 50% travelling.

Technical Competencies:

• MS Office products (Word, Excel, Powerpoint, Project)
• Ability to understand electrical schematics and PLC programs. It will be advantageous if the candidate is well versed in hydraulic / mechanical systems and also have an in-depth knowledge of the of the Drilling Equipment designed by NOV.
• Preferred working experience in Reliability, Availability, Maintenance and Safety (RAMS) and application of FEMCAs (Failure Mode, Effects, and Criticality Analysis) strategies for predictive maintenance (PM) and corrective maintenance optimization.

Install, service, and maintain of

Bolding machines. (TBM)

- Electrical Wiring

- PLC Based control system

- Motor control systems

Pump system

- Motor installation and Repair

- Commissioning

Filter Press Machines

Decanter Centrifuge Machines

Verify lighting installations against design specifications and drawings.

Determine load balance and distribution to ensure optimal electrical system performance.

Create single-line diagrams for household electrical wiring systems. (troubleshooting & repairing)

Install and commission household electrical systems and equipment.

Perform power calculations and distribution analysis for substation design and operations.

Conduct high voltage testing on equipment prior to operation.

Provide technical support on electrical system & equipment to project team.

Other adhoc duties to support project team.

PERSONIL SKILL

- Highly organized and efficient

- Excellent communication and fluency skills

- Strong work ethic and willingness to learn

- Quick learner with adaptability

- Proven leadership abilities

- Self-motivated and results-driven

- Independent worker with excellent teamwork skills

Job Responsibilities

• Assist in the design, build, wiring and testing of R&D prototypes.
• Sourcing of components, materials, etc.
• Liaise with vendors & suppliers on technical issues.
• Hands on troubleshooting and maintenance of existing systems.
• Perform other ad hoc duties as requested by management.

Job Requirements

• Diploma or Degree in Mechatronics/Electrical engineering.
• Entry level will depend on applicable skills and experiences.
• Must be able to comprehend electrical schematics and wiring diagrams,
• Hands-on experience in mechanical work would be an advantage.
• Able to work with minimal supervision and keen on learning new technologies.
• Team player and motivated to succeed.
• Fresh graduates with strong interest may apply as Assistant Electrical Engineer.

Electrical Engineer

Job Responsibilities:

• Design control systems.
• Preparation of drawings for customer approval.
• Preparation of drawings/BCM for shop floor production.
• Co-ordinating with clients, consultants and internal departments.
• Drafting work with the use of CAD system (AUTOCAD/SOLIDWORKS).

Requirements:

• Diploma or Bachelor’s Degree in Electrical Engineering.
• Hands-on experience with vessel mechanical and engine systems.
• Experience with engineering design software.
• Familiarity with maritime HM&E systems and naval construction processes.
• Excellent analytical thinking and problem-solving abilities.
• Team player and good communication skills.
• Physically fit and able to work in strenuous circumstances.

Working Location : West side, near Pioneer MRT

Job Highlights

• On-the-job training and coaching.

• Immediate Hiring

Job Description

Job Responsibilities:

1. Participate in the design, implementation, and test of firmware systems for logistics automation.

2. Manage lab equipment and conduct PoC (Proof of Concept) tests for potential customers.

3. Work with colleagues in Korea and China to maintain and continuously improve system demonstrations at the Singapore lab.

4. Assist to manage the implementation of automation projects according to customer requirements.

5. Supervise project implementation and manage contractors, to maintain project schedule.

Qualifications / Skills:

1. Diploma or Bachelor of engineering in mechatronics, mechanical or electrical engineering, manufacturing, or other related discipline required.

2. 1~3 years of PLC programming or robotic programming.

3. Training will be provided.

4. Experience in logistics automation systems will be an advantage.

Description:

• To improve and optimize the manufacturing processes and practices.
• To oversee design and installation of new process equipment, e.g. bottle/drum filling lines, storage/blending tank installation.
• To participate in new product introduction project.
• To carry out maintenance on the factory facilities and production equipment.
• To spearhead and maintain the environmental and safety management system.
• To take charge and oversee the jetty operation.
• To provide technical training.
• To perform any other works as required and assigned by superior.

Requirement:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Chemical), Engineering (Mechanical) or equivalent.
• At least 2 Year(s) of working experience in the related field is required for this position.
• Preferably Executive specialized in Engineering - Chemical or equivalent.
• Workplace Safety and Health level B or higher.
• Port Facility Security Officer an added advantage.
• Certified Internal Quality Auditor an added advantage.

How to Apply:

Interested applicants may apply by sending in the following:

1. Updated resume
2. Short description of experience
3. Reason for leaving prior jobs
4. Current and expected salary

We regret to inform that only shortlisted candidates will be notified.

Job Description:

• Review and coordinate detailed civil/ structural/geotechnical design.
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities.
• To liaise with AC and QP(D) to ensure that all permits and applications as required by BCA are endorsed in tandem with the progress of the Works.
• Assist to check on the design calculations.
• Lead in the review of Contractor’s submissions required of the Consultant and coordinate with his respective QP(S) and the Contractors design teams to ensure prompt resolution of all design related issues arising from the reviews of the Temporary and Permanent Works.

Job Requirements:

• Degree in Civil/ Structural/ Geotechnical Engineering or its equivalent.
• Minimum 2 years relevant experience in Singapore.
• Good exposure in the analysis and design of civil works or soil-structure interactions.
• Good knowledge of the various engineering design software and analytical tools.

Responsibilities:

• Design of heavy structures made of aluminium alloy
• Liaise with clients, vendors and third parties on technical issues
• Cooperate with project team on the project planning and execution
• Supervise/check the design drawings and material take-off
• Perform structural analysis and prepare structural analysis report

Requirements:

• Degree in structural/marine/naval architecture/civil/ engineering
• Min. 5 years experience in structural design in offshore/marine/civil industry
• Strong technically and competent in structural design and analysis
• Familiar with and experience in international structural design codes, standards and project specifications and structural design software packages
• Experience in aluminium design is not required as training will be provided
• Good written and spoken English
• Come and convince us why you are the best person for the job

Install, service, and maintain of

Bolding machines. (TBM)

- Electrical Wiring

- PLC Based control system

- Motor control systems

Pump system

- Motor installation and Repair

- Commissioning

Filter Press Machines

Decanter Centrifuge Machines

Verify lighting installations against design specifications and drawings.

Determine load balance and distribution to ensure optimal electrical system performance.

Create single-line diagrams for household electrical wiring systems. (troubleshooting & repairing)

Install and commission household electrical systems and equipment.

Perform power calculations and distribution analysis for substation design and operations.

Conduct high voltage testing on equipment prior to operation.

Provide technical support on electrical system & equipment to project team.

Other adhoc duties to support project team.

PERSONIL SKILL

- Highly organized and efficient

- Excellent communication and fluency skills

- Strong work ethic and willingness to learn

- Quick learner with adaptability

- Proven leadership abilities

- Self-motivated and results-driven

- Independent worker with excellent teamwork skills

· Managed project lifecycle from BOM creation in SAP B1 to overseeing commissioning and handling after sales enquiries.

· Provide technical field assistance, in maintenance, installation, operation, and start-up for all CPM equipment; prepare customer field report after each trip.

· Assist customers service and the sales team, providing technical and process information for after-market sales.

· Coordinate customer service and purchasing department for after-market sales and delivery.

· Regular visits the prospects, customers, and agents to provide technical advice and generate sales opportunities.

· Maintain and analyses records of opportunities, quotes and contacts and knowing how to act on them.

· Engineering design & improvement of current parts

· Perform equipment assembly related task (quality check on incoming items, urgent assemblies, electrical I/O and PLC)

· Perform other related duties as assigned

QUALIFICATION AND SKILLS

· Bachelor’s degree in engineering (Mechanical Engineering preferred), or equivalent 5 years relevant working experience

· Ability to travel as needed. up to 30-50% possible.

· Customer service, sales support, or project management experience a plus

· Experience with ERP systems (SAP Business One is preferred), Excel, CAD (AutoCAD & Inventor is preferred)

Job Overview:

The Applications Engineer (AE) represents technical aspects of business development and project definition. AE is responsible for providing full technical support for Business Development/Sales of all Anaergia Projects from the origination phase through contract negotiation and hand over to Anaergia Project Execution Team with all required specifications and budget development. Consistently manage the assigned engineering activities in preparing project documents in compliance with project schedule and observing the correctness and the completeness of the provided information.

The AE’s goals can be summarized as follow:

· Design phase: providing technical support to the Sales Team by assessing technical information and develop conceptual/preliminary design of integrated solutions for projects using both Anaergia and third party technologies.

· Proposal phase: Cost and price calculation using Anaergia tools and basing design on Anaergia Design Manual recommendations, lessons learned and best practices

· Provide technical documentation and cost data for the Contracts, Sales, and Marketing teams and help negotiate technical issues at customer level.

· Permanent support to Sales during the proposal phase interfacing with client, client engineers, subconsultants, contractors and permitting agencies as required.

· Quickness and flexibility in responses to urgent questions from project managers, project Engineers and sales managers.

· Provide integrated view of the project and forge strong links between all internal and external project stakeholders to ensure a consistent and coordinated technical approach for all projects.

Job Responsibilities:

The AE’s tasks includes:

· Provide technical and commercial support and product advice for existing and future product portfolio within the areas of solid waste treatment, anaerobic digestion, biogas utilization, nutrient recovery and wastewater treatment.

· Develop Front End Engineering Documents (FEED) including Block Flow Diagrams (BFD), Process Flow Diagrams (PFD) and Process & Instrumentation Diagrams (PID) and general arrangement drawings during bid development and project development as necessary.

· Liaise and develop new Asian vendor database.

· Review and appraise customer specifications and provide summary notes including the specification’s alignment or otherwise with Anaergia’s Products and Technologies.

· Design systems, including biological processes using existing tools and process blocks in coordination with the Global Process Engineering Team.

· Process customer inquiries and orders; Analyze customer requirements and development of offers in close consultation with the Sales Team; Obtain, compile and process information about competitors and the market.

· Prepare proposals and price calculation according to the company guidelines and the implemented processes; Request quotations from defined and selected subcontractors and pre-negotiate the received quotes.

· Actively participating in Offer Preparation during the proposal phase to note any deviations; Participate in finding solutions in coordination with internal manufacturing departments and the sales manager.

· Compile all relevant technical documents for the proposal and / or for the contract.

· Support Sales department in request phase for pre-qualifications.

· Record all project relevant documents and costing data on the within the database.

· Perform continuous maintenance of costing data base in conjunction with the Global Applications Team.

· Support and coordinate preliminary design activities during project development of Anaergia Build Own Operation Business including site/civil, electrical, mechanical, structural as well as permitting and grant application activities as necessary.

Job Requirements:

Education and Experience

· Holds a bachelor’s degree in: Chemical Engineering / Mechanical engineering/ Environmental Engineer/ Residential water management or another high technical education or equivalent with a focus on municipal and environmental engineering.

· Fresh graduates are warmly welcomed. 1 to 3 years of working experience as an Applications Engineer or Process Engineer within the Industrial Plant business, preferable in solid waste treatment, wastewater treatment is considered highly advantageous.

· Understanding of all MS Office tools and ability to adapt to new digital tools.

· Basic understanding of process plants including chemical processes.

Technical Skills

The AE has the following technical skillsets:

· Good understanding of basic processes like wastewater treatment, biogas, anaerobic digestion and/or municipal solid waste (will be preferred).

· Understanding of mass and energy balance, equipment sizing.

· Ability to use MS office tools, AUTOCAD software (will be preferred).

The AE has the following Key Personal Attributes -

· Excellent interpersonal skills and a positive attitude to get things done.

· Passionate, highly driven, and hard-working, portrays an Entrepreneurial spirit, a great team player and gets things done. Has the ability to self-start tasks without dropping the ball waiting for responses from others. Inquisitive, solutions oriented. “Can do” attitude

· Always reading on new technologies, technically deep and detail oriented.

· Team player, humble. Meets promises internally and to external clients and project stakeholders and participants

· Aligned and motivated by our company Mission.

Job Description

• Manage the company’s projects
• Coordinate between client, company, factory and work site staff
• Work on ensuring good quality and maintain delivery schedules
• Liaise with QA/QC for the third party/client inspections, class survey certification, etc

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 2 years of working experience in similar industry
• Good written and spoken English
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Leadership qualities expected
• Able to plan and manage project independently
• Come and convince us why you are the best person for the job

• Good Base+great benefits!
• Certified Salesforce Platform Developer req!
• Great environment to work in!
• Opportunity to work w/ different projects!
• Leading IT Company+friendly & diverse culture!

Our client is one of the leading Technology organisation

Responsibilities:

• Work within an agile development team to modernise and develop system. This may include collaborating with stakeholders to validate business requirements
• Developing Apex classes & triggers to support business needs and custom user interface development
• Using Salesforce APIs to integrate with 3rd party systems and integrate with components/services
• Adhering to Salesforce best practices with proper documentation

Requirements:

• Bachelor in Computer Science, Technology, Engineering disciplines are preferred
• Certified Salesforce Platform Developer
• Possesses one/more of the following skillsets:
• Development/Customization Experience
• Apex development
• Visualforce page development
• Lighting components development
• Experience in 3rd party API integrations
• Experience with data migration through other CRM eg. data loader
• Configuration Experience
• Hands-on configuration experience in administration setup, eg., managing org, users, profiles, roles, security controls, data & support processes configuration
• Experience in designing custom objects, custom fields, picklists, page layout, workflow, approval processes, validation rules & flow
• Experience in report & dashboard configuration
• Experience with OmniStudio & Omniscript will be a bonus

Other Information:

• Working Hours: Mon-Fri, 9am-6pm, flexible work hours/hybrid work arrangement)
• Location: Near Braddell MRT

To apply please click on the LOGIN TO APPLY button with the following details inside your resume for faster processing:

• Reason for leaving
• Last drawn Salary
• Expected Salary
• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Jiang Yiang Dong

EA License | 14C7092

EA Registration Number | R1105012

Job Description:

• Inspection of project sites
• Coordinate, manage, and supervise all the instrument installation and monitoring works
• Liaise and coordinate with contractor for installation and monitoring issues
• Attending site progress meetings, preparing meeting minutes and coordinating with clients
• Process and interpret monitoring readings
• Coordinate with construction team to minimise obstruction and damage to the monitoring instruments
• Supervise and quality control in instrumentation works
• Other ad hoc duties as assigned

Requirements

• Relevant education background in Civil Engineering / Geotechnical / Geology
• Min 3 years of working experience in instrumentation and monitoring works
• Experience in LTA projects
• Senior position will be considered with relevant experience
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Mandatory Skills

Job Description:

Roles and Responsibility :

• Understanding of Elastic search architecture, indexing, and querying.
• Experience with cluster management, performance tuning, and scaling.
• Proficiency in configuring Logstash pipelines and understanding various input, filter, and output plugins.
• Experience with data transformation and processing.
• Ability to create visualizations and dashboards using Grafana.
• Familiarity with Grafana/Kibana's query language and features for data analysis.
• Experience with data ingestion and ETL processes.
• Understanding of JSON and other data formats.
• Proficiency in languages like Python, Java, or similar for automation and custom scripts.
• Experience in using Java, SpringBoot, JPA, MySql/PostGres DB, Frontend(Angular/ReactJS) technologies
• Proficiency in linux, windows, cloud, containerized based applications
• Skills in monitoring the ELK stack and troubleshooting issues.
• Ability to analyze logs and data for insights.
• Strong troubleshooting skills for identifying and resolving issues.
• Ability to explain technical concepts to non-technical stakeholders.
• Experience working in cross-functional teams.
• Relevant experience in system administration, DevOps, or data engineering.
• Familiarity with cloud and containerized services (AWS, PCF, OpenShift etc.) can be beneficial.

Qualifications:

• Minimum bachelor’s degree or equivalent
• With 5 years of ELK stack experience with Grafana dashboards in banking industry.
• Keen knowledge or experience in Waterfall and/or Agile Methodologies (ITIL, Scrum, etc would be an advantage)
• Ability to articulate and clearly communicate complex problems and solutions in a simple and logical manner.
• Well-developed analytical skills and the ability to provide clarity to complex issues and synthesize large amounts of information.
• Deadline sensitive and able to work independently and under pressure.
• Certifications in Elasticsearch or related technologies will be an added advantage.