• Collaborate closely with the Planning and Project Controls Manager to perform planning and scheduling, risk management, cost control, and reporting activities throughout the detailed design and construction phases of the project.
• Act as the main contact for planning, scheduling, and cost analysis, developing accurate cost forecasts and actionable reports to support effective project management.
• Prepare and deliver clear status reports, issue network-based schedules, update Primavera P6 with project progress, and monitor earned value systems to guide team performance and understanding.
• Strong knowledge of planning and scheduling to identify scheduling issues and recommend corrective actions and implement relevant control services.

Requirements:

• Degree in Project Management or equivalent
• At least 5 years EPC/full-service project delivery processes and apply project controls methodologies and practices specifically related to cost control development.
• Strong verbal and written communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

• Handle the preparation and modification of schematic, detailed, and production drawings for precast concrete components, steel molds, and reinforced concrete structures, and address technical and design challenges following Singapore's established standards.
• Responsible for preparing 2D and 3D presentations and design drawings, as well as compiling data and performing basic design computations.
• Expected to engage in client liaison, coordinate with authorities, consultants, and subcontractors, and attend design and construction meetings
• Provide guidance and support to less experienced staff or colleagues in their tasks.

Requirements:

• Diploma / Degree in Civil Engineering
• At least 2 years relevant experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Develop test programs for Digital, PMIC, RF & Mixed Signal products on automated test equipment.
• Liaise closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities.
• Troubleshoot digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature).

Requirements:

• Diploma in Electronics/Electrical/Communication Engineering or equivalent.
• At least 3 years of developing SOC programs from NPI to volume ramp stage experience with Advantest V93k or Teradyne Uflex/Iflex.
• Proficient in Java, C/C++, Visual Basic, Perl, Python

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

about the job

• Develop and implement the procurement strategy aligned with the organization overall objectives and financial targets
• Forecast procurement needs, assess risks, and create contingency plans to ensure consistent supply
• Identify, evaluate, and select suppliers/vendors based on quality, reliability, and cost effectiveness
• Establish and maintain strong relationships with key suppliers to negotiate favorable terms and conditions
• Conduct regular performance evaluations of suppliers to ensure compliance with contractual agreements and service levels
• Provide guidance and support to team members, promoting professional development and a positive work environment
• Identify potential risks in the supply chain and develop risk mitigation strategies
• Monitor global market trends, geopolitical developments, and industry changes that may impact procurement activities
• Utilize data-driven insights to make informed decisions and improve procurement performance
• Prepare regular reports on procurement metrics, cost savings, and supplier performance for senior management

skills & experience required

• Master / Degree in Chemical / Mechanical Engineering or equivalent
• Minimum 7 years of procurement experience in oil terminal equipment (tanks, pumps, piping, metering systems)
• Established vendor network and supplier connection
• Proficient in MS Word, Excel, Power Point, Project, SAP and AutoCAD

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R132591

Marine Service Engineer

Location at Tuas, Work on site (sea)

5 Work Days 8am-5pm / 8.30am-5.30pm / 9am-6pm

Basic Salary Open for Discussion + AWS(dec) + Variable Bonus (Jan) + Medical Benefits + Transport Allowances

Roles & Responsibilities

• Perform the repair, maintenance or overhaul of marine diesel engines 2 & 4 stroke under supervision of Engineer / Technicians.
• Comply with all the requirements to carry out the jobs in the shipyards or anchorages.
• Lifting and shifting heavy components of engine back to workshop for repair / recondition and vice-versa.
• Ensure prompt response and smooth communication with the customers
• Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

• Must DEGREE in marine / mechanical / engineering qualification
• At least 3 years of related experience as Marine Service Engineer.
• Hands-on experiences in trouble-shooting, maintenance and repair is an added advantage
• Prefer someone with maintenance experience in marine engine makers like MAN and Wartsila
• Training period at office (Tuas), after training will work on vessel.
• Willing to work in shipyard / anchorage environment

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

JOB SUMMARY

We are looking for a Project Engineer to responsible for project delivery and work closely with commissioning team in the site operations and responsible for supporting the project progression, in ensuring the expectations, works, procedures and deadlines are met.

JOB DUTIES & RESPONSIBILITIES

• Assist Managers in ensuring the successful implementation of projectUndertake all testing & commissioning activities from factory tests to integrated systems tests in the final stage of projects
• Assist Managers to monitor site progress and site meeting coordination;
• Attend site meetings and address if any technical queries from client
• Handle Reviews / Tracking vendor response method statement
• Witness contractor’s testing and commissioning results and confirm compliance
• Handle project administration and documentation works

REQUIREMENTS AND SKILLS

Knowledge

• Diploma or above in Mechanical / Electrical / Building Services Engineering or related discipline in engineering
• Good command of written and spoken English and Chinese.
• Hands-on knowledge of PC applications such as MS Office, MS Project.

Experience

• With 2-3 years’ relevant working experience in MEP systems, building services coordination and/or testing & commissioning process with multi-national corporate exposure preferred.

Competencies

• Able to communicate effectively.
• Able to plan and organise
• Able to drive results
• Able to build partnership
• Able to influence
• Able to earn trust
• Able to improve continuously
• Decision Making

Personal Attributes

• Positive Approach
• Reliable
• Self-motivated
• Detail-oriented

We offer a competitive remuneration package commensurate with qualifications and experience to the right candidate. Please send in full curriculum vitae, including present and expected salary.

We are an equal opportunity employer and welcome applications from all qualified candidates. The information provided will be treated in strict confidence. Personal data collected will be used for recruitment purposes only.

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Deploy, administer, and support database and data lake infrastructures.
• Formulate and execute plans for high availability, backup, recovery, and disaster preparedness.
• Diagnose and resolve database issues and optimize performance.
• Enforce industry-standard security measures, policies, and best practices.
• Enhance clients' data warehouses and data lakes, and maintain comprehensive documentation.

Requirements

• Proficiency in Database Administration.
• Experience with Linux operating systems and scripting.
• Practical experience with at least one of the following: Hadoop Distributions, Relational Databases, or NoSQL Databases.
• Advantageous knowledge in one or more of the following areas: Data Virtualization tools, Scripting languages, Cloud platforms, and Docker/Kubernetes environments.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Key Responsibilities

• Assist with the installation and support of data center physical infrastructure.
• Install, replace, and troubleshoot cables and hardware components.
• Handle data-bearing devices, including hard drives and SSDs.
• Operate within a ticket-based environment for task management.
• Use pallet jacks or other lifting tools to move equipment safely.
• Support the Data Center Inventory and Asset Management Team in managing inventory and shipping tasks during peak times.
• Flexibility to work during weekends or holidays when required.

Qualifications and Skills

• Diploma or Degree in IT, Computer Engineering, or a related field.
• At least one year of experience in IT Support or Monitoring (fresh graduates with a proactive mindset are encouraged to apply).
• Six months or more in handling technical equipment or machinery.
• Familiarity with computer hardware and components.
• Preferred certifications include CompTIA (A+, Server+, Network+) and Basic Structure Cabling (BSC).
• Physically capable of standing, walking, and lifting frequently, with or without equipment assistance.
• Strong communication skills in English, both written and spoken.
• Enthusiasm for learning and expanding technical skills.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

• Handle the Precast Concrete Production in the factory.
• Understand the design drawings and production drawings and conduct quality check.
• Liaise with all the relevant parties for production and inspection of the factory.
• Manage the Suppliers and Contractors to rectify if there are any defects prior to delivery to site.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 4 years of PPVC and/or PBU Production control experience.
• Proficient with ICTs, Digital Progress control/monitor.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Supervise, execute, and coordinate project activities until project completion.
• Ensure the project is on schedule, within budgeted cost and quality standards.

Requirements:

• Diploma in Electrical or Electronics Engineering
• At least 2 years’ experience in alarm, card access and CCTV system installation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Fire Protection Engineer
• 5.5 Work Days
• 8.30am - 5.30pm (Mon - Fri); 8.30am - 12.30pm (Sat)
• Working location: Labrador, Singapore
• Basic Salary $3500 to $5500 + Bonus

Requirements

• Diploma / Degree in Mechanical Engineering/Building Services
• 5 years of relevant experience
• Experience in Water Mist system and/or foam system is added advantage

Job scope

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples
• Review and align Fire protection design drawings to ensure compliance with design specifications and guidelines (Sprinkler System, Fire Alarm System, Hose reel System, Wet/Dry riser system, Fire Hydrant System, Fire man intercom system)
• Knowledge in M&E and able to Identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the schedule
• To attend meeting with contractors to address issues and update progress
• Study and reviewing of drawings, specifications for compliance
• Allocate work to supervisors and ensure jobs are correctly and properly achieved within standards and SOP.
• Plan and lead testing and commissioning of the fire protection systems.
• Follow up with site / authority inspections, defects rectifications of the fire protection work.
• Plan and prepare OMM, training, As-Builts drawings for handing over of completed fire protection systems to client.
• Follow up with maintenance of fire protection systems during DLP

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

Job Description

• Conduct QAQC daily checks
• Prepare monthly QAQC report for submission to Corporate QAQC Department
• Conducting monthly QAQC Training to Sub-contractors
• Issuance of QAQC Non-compliance to sub-contractors
• Attend monthly QAQC presentation and meeting at Corporate QAQC Department
• Prepare and maintain quality assurance documentation, including quality plans, inspection reports, test protocols, and other relevant records.
• Evaluate and qualify suppliers based on their quality systems, capabilities, and performance.
• Prepare and present regular reports on quality performance, including key metrics, trends, and areas of concern or improvement. Communicate findings and recommendations to management and relevant stakeholders.

Requirements

• At least advanced diploma, diploma in related qualification.
• Architectural-trained or Structural-trained work experience.
• Strong knowledge of quality control procedures, methodologies, and tools.
• Familiarity with quality management systems and standards (e.g., ISO 9001).
• Experience with inspection techniques, measurement tools, and testing equipment.
• Analytical mindset and attention to detail.
• Strong problem-solving and root cause analysis skills.
• Excellent communication and interpersonal skills.
• Ability to work effectively in cross-functional teams.
• Min 3 years’ experience

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

Experience in setting up automated systems.

Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Create and deploy software solutions for high-speed automation systems.
• Architect, program, test, troubleshoot, and verify software applications.
• Assess and define system performance metrics and requirements.
• Software support to field service teams, update and optimize software for equipment.

Requirements

• Expertise in C/C++ programming and multi-threaded Windows development with Visual C++.
• Strong knowledge of electronic components, motion control, and interfacing with inspection systems.
• Proficient in mathematical principles and algorithm development.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Responsibilities:

• Design, analysis and plan for Civil & Structural engineering works
• Prepare design calculations, drawings and carry out Authority submissions
• Responsible for timely submission of plans and reports to Consultant and Authorities
• To coordinate & liaise with consultant, sub-con and other trades eg M&E and architectural for projects specifications & other technical issues
• To assist in project coordination and oversee of all structural / civil works on site and ensure all related activities are carried out as per drawings
• Attend meetings inclusive technical meetings (not withstanding to minutes down the meeting if necessary) and site walks during the construction phase of project
• Keep track of test reports, tests, ST, Green Mark scheme and constructability scheme
• Document control and compilation accordance to company ISO standard

Requirements:

• Diploma or Degree in Civil / Structural Engineering / Building
• Min 3 years structural coordinator experience
• Good knowledge of Structural specifications & requirements

Job Description:

Study of construction drawings details and coordinate with the consultants and sub-contractors to resolve any technical/site issues.

- Ensure that works on site are carried out according to specifications/drawings.

- Produce coordination drawings and check drawings discrepancies.

- Carry out project planning, design, materials requisition, cost control, project supervision and documentation.

- Ensure quality of works is achieved and safety regulations are complied with.

- Attend meetings.

- To attend regular meetings with clients representative, consultants and contractors and ensure the progress is on schedule

- To Prepare Plan and submit project related documents, such as schedules, method statement, design plan, Risk Assessment, monthly report.

- To establish proper and effective document control system, maintain and conduct review s of details design drawings, project documents and specifications.

We are hiring a Senior DevOps Software Developer for a project with an International Investment Bank.

The Senior DevOps Developer will take on a hands-on role to:

• Implement all necessary tools to manage the environments, the continuous integration, the continuous delivery, and the processes execution.
• Manage and administrate environments from assembly to production (rules included), infrastructure implementation, and operational usage.
• Execute the maintenance operations, delivery, and environment monitoring.
• Provide L3 support on non-production environments for delivery teams and also on production for support teams.

Job Responsibilities:

• Participate in the automation of the deployment solution
• Participate in environment preparation for testing phases
• Participate in developing tools to simplify day-to-day activities on the program
• Facilitate coordination between program developers and infrastructure engineers
• Ensure continuous improvement and maintenance of the CI-CD pipeline
• Provide investigation help while fostering knowledge and sharing best practices with team members
• Research, design, and develop software
• Analyse user needs and develop software solutions
• Update software, enhance existing software capabilities, and develop and direct software testing and validation procedures
• Work with other engineers to integrate hardware and/or software systems
• Develop specifications and performance requirements

Job Requirements:

• Bachelor Degree in Computer Science, Information Technology, Programming & Systems Analysis, Science (Computer Studies) or related fields
• Minimum 8 years of experience in DevOps Software development
• 5 years of experience in Java/J2EE development
• Working experience with DevOps Methodology; with minimum 5 years of hands-on experience in Jenkins, GIT (GitLab), Ansible, Docker/ Kurbernetes, CICD pipeline, Kibana, Jira
• Good to have grid computing experinece
• Some basic understanding of finance and investment banking, knowledge in Market Risk is an advantage

Keen to explore more? Please reach out to [email protected] with an updated CV for a detailed discussion.

Job Description:

• Takes charge of the entire engineering department, leading a team as they complete various projects
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation, and execution of works on-site
• Coordination, supervision & monitoring of the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor and suppliers on all project implementation issues and attend site meetings when required
• Produce weekly site progress reports and necessary submission
• Attend meetings, and conduct site inspections on work progress to ensure quality control in accordance with authority requirements.
• To carry out daily implementation of works at the site with assistance from fellow supervisors and foremen.
• To plan and ensure all implementations are carried out in accordance with the Construction program.
• Carry out daily discussions with the project team and fellow colleagues to ensure works are carried out smoothly and no re-work or clashes with other trade works.
• Study all related construction drawings and prepare and raise any RFI’s required early before implementation of the actual works.
• To prepare any necessary construction method statement and technical proposal to ensure the smooth transition of works.
• Ensure all necessary inspections in accordance with the client’s requirements are carried out accordingly, correctly, and timely.
• The plan and sequences of the construction operations are in accordance with the Project Quality Plan. Attends all necessary site progress meetings, and internal meetings as & when required.
• Keep track of submission status like shop drawings, materials, samples, method statements & all other technical submissions.
• To carry out resource planning, machinery allocations, and equipment management on a day-to-day basis to ensure works at the site are carried out smoothly.
• Coordinates and maintains constant communications with fellow colleagues from other departments like architectural, technical, and planning.
• Liaise with the client’s supervisory department for site inspections, submission of necessary technical reports, and maintaining necessary records at the site.

Job Requirements:

• Bachelor's Degree in Civil Engineering or equivalent
• More than 10 years of working experience in the related field is required
• Proficient with AutoCAD and other office software
• Ability to work with tight deadlines
• Work closely with the project team to resolve technical issues
• Good attitude and communication skills
• Need to be stationed at the site (Jurong East)
• Willing to work 6 days at the project site
• Experience in LTA projects is required
• Experience with high-rise buildings would be advantageous
• Excellent verbal and written communication skills
• Equipped with leadership skills in which able to lead the engineers in completing the jobs

Job Description:

• Takes charge of the entire engineering department, leading a team as they complete various projects
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation, and execution of works on-site
• Coordination, supervision & monitoring of the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor and suppliers on all project implementation issues and attend site meetings when required
• Produce weekly site progress reports and necessary submission
• Attend meetings, and conduct site inspections on work progress to ensure quality control in accordance with authority requirements.
• To carry out daily implementation of works at the site with assistance from fellow supervisors and foremen.
• To plan and ensure all implementations are carried out in accordance with the Construction program.
• Carry out daily discussions with the project team and fellow colleagues to ensure works are carried out smoothly and no re-work or clashes with other trade works.
• Study all related construction drawings and prepare and raise any RFI’s required early before implementation of the actual works.
• To prepare any necessary construction method statement and technical proposal to ensure the smooth transition of works.
• Ensure all necessary inspections in accordance with the client’s requirements are carried out accordingly, correctly, and timely.
• The plan and sequences of the construction operations are in accordance with the Project Quality Plan. Attends all necessary site progress meetings, and internal meetings as & when required.
• Keep track of submission status like shop drawings, materials, samples, method statements & all other technical submissions.
• To carry out resource planning, machinery allocations, and equipment management on a day-to-day basis to ensure works at the site are carried out smoothly.
• Coordinates and maintains constant communications with fellow colleagues from other departments like architectural, technical, and planning.
• Liaise with the client’s supervisory department for site inspections, submission of necessary technical reports, and maintaining necessary records at the site.

Job Requirements:

• Bachelor's Degree in Civil Engineering or equivalent
• More than 10 years of working experience in the related field is required
• Proficient with AutoCAD and other office software
• Ability to work with tight deadlines
• Work closely with the project team to resolve technical issues
• Good attitude and communication skills
• Need to be stationed at the site (Jurong East)
• Willing to work 6 days at the project site
• Experience in LTA projects is required
• Experience with high-rise buildings would be advantageous
• Excellent verbal and written communication skills
• Equipped with leadership skills in which able to lead the engineers in completing the jobs

Job Description:

• Corporate with the constrcution manager to connect with various government acceptance departments.
• Corporate with the constrcution manager to supervise and manage the site to meet the various goals of the project.
• Corporate closely with subcontractors to monitor the progress of small towns and coordinate the work resources required by subcontractors to meet project requirements.
• Corporate with goverment personnel to conduct on-site inspections.
• Participate in weekly or monthly meetings with subcontractors to discuss work progress and corperate in preparing monthly meeting progress reports.
• Establish good relationships with all relevant parties.
• Corporate to ensure site safety and comply with the requirements of the authorities.
• Corporate to organize relevant physical and electronic documents on site engineer, etc.
• Other tasks assigned by the manager.

Requirements & Qualifications:

• Diploma / Degree or above preferably from a recognized University accredited with PEB, Singapore
• Experience with public residential projects would be advantages
• Proficient in Microsoft Office / Projects, AutoCAD
• Ability to keep a positive attitube in a fast-paced environment
• Good team player

• 8 years of expertise in ETL, Data Warehousing, and Big Data technologies. The candidate should have a strong background in IBM InfoSphere DataStage, Oracle PL/SQL, Unix Scripting, and hands-on experience with Moody’s tools.

• The role requires in-depth knowledge of data extraction, transformation, and loading (ETL) processes, as well as experience with CI/CD and automation tools to support efficient data operations. This is an opportunity to contribute to large-scale data projects and work closely with cross-functional teams in a challenging and dynamic environment.

• Design, develop, and maintain ETL processes using IBM InfoSphere DataStage (versions 8.1, 8.7, and 11.3).

• Build and optimize parallel jobs to clean, transform, and load data into target databases.

• Implement robust solutions for data extraction and transformation from various sources including flat files and RDBMS.

• Configure and manage job scheduling and automation using tools like Control-M and Autosys.

• Develop shell scripts and use Unix commands to enhance ETL performance and streamline data processing.

• Ensure efficient job execution, error tracking, and troubleshoot performance issues.

• Use Moody’s tools (RCO, RAY, RFO) to support liquidity, risk management, and financial reporting projects.

• Troubleshoot and resolve issues related to GL recon breaks, ALM/LIQ stress processes, and LCR processes.

• Support Big Data solutions by working with core Spark (batch processing) and Spark SQL using Scala.

• Use Hadoop technologies like HDFS, Hive, and Sqoop for large-scale data migration and analysis.